Moro e (condor) always boots into recovery mode after flashing rom - Moto E Q&A, Help & Troubleshooting

I flashed the crdroid rom and after doing so my phone always boots into recovery mode. It does not show the logo it just shows the unlocked boot loader screen then boots to recovery. I have tried clearing the cache and data too but that did not work.
I am using twrp recovery 3.02.
I also tried flashing cyanogen mod on this device but after flashing it it would not get past the boot animation. I reformatted the device after that and restored it using a nandroid backup even this gave me a lot of problems initially but a fastboot clear cache sorted those out.
Any and all help would be really appreciated

Flash the stock rom and root the device and try again
Sorry for my english

flash the rom in fastboot without flashing motoboot and gpt.bin and then boot it after sucessful boot reflash ur recovery and then flash ur desired rom with only cache and delvik wipe.... Hit thanks if it worked.

Related

[Q] Decive Hangs after crashed ROM flash

hi,
i hope someone can help: i was just flashing a new rom update, when in had a reset/reboot during the copy-process (so not planed or so). since then all is ****ed up.
twrp shows starting image, nothing more -> reboot loop
flashed kernel again -> reboot loop
flashed twrp again -> reboot loop
only bootloader is working.
please help
thanks a lot
call fastboot erase cache
did it
wipe and flash Rom from TWRP again
thanks for your answer. did it. the cache wipe solved the issue that twrp didn't load. so no twrp, no recovery/install

[SOLVED] When going into recovery it quickly shows cwm then reboots phone

So... I got my HTC One today and it's been a very difficult experiance. I am quite a newbie when it comes to rooting and such but I managed to unlock my bootloader (with the exception that it shows TAMPERED at the top) then proceded to flash TWRP through fastboot. TWRP wouldn't mount /data, /sdcard, etc... it wouldn't work. A little bit of searching led me to flash CWM instead and that seemed to work.
In CWM I wiped data/factory reset, then flashed SuperSU, then flashed CleanROM, then flashed BulletKernel, and finally reboot. Now I'm stuck in a bootloop and when I go to my bootloader and try to enter recovery it reboots, shows the CWM logo then reboots my phone. I tried re-flashing CWM via fastboot to no avail.
TL;DR: Phone is in bootloop and won't even boot into recovery
Any help would be much appreciated,
Thank you!
EDIT: Had a feeling it was due to the fact I didn't clear cache/dalvik cache before rebooting. I erased my cache via fastboot and voila it booted into recovery!
OrangeFever said:
So... I got my HTC One today and it's been a very difficult experiance. I am quite a newbie when it comes to rooting and such but I managed to unlock my bootloader (with the exception that it shows TAMPERED at the top) then proceded to flash TWRP through fastboot. TWRP wouldn't mount /data, /sdcard, etc... it wouldn't work. A little bit of searching led me to flash CWM instead and that seemed to work.
In CWM I wiped data/factory reset, then flashed SuperSU, then flashed CleanROM, then flashed BulletKernel, and finally reboot. Now I'm stuck in a bootloop and when I go to my bootloader and try to enter recovery it reboots, shows the CWM logo then reboots my phone. I tried re-flashing CWM via fastboot to no avail.
TL;DR: Phone is in bootloop and won't even boot into recovery
Any help would be much appreciated,
Thank you!
Click to expand...
Click to collapse
Boot into bootloader. Then do fastboot erase cache. Then try rebooting. If you can get into recovery but not ROM, reflash the ROM. If you can't even get into recovery still, try reflashing recovery. Fastboot flash recovery recovery.img. Then try getting into recovery and reflashing.
Sent from my HTC One
phositadc said:
Boot into bootloader. Then do fastboot erase cache. Then try rebooting. If you can get into recovery but not ROM, reflash the ROM. If you can't even get into recovery still, try reflashing recovery. Fastboot flash recovery recovery.img. Then try getting into recovery and reflashing.
Sent from my HTC One
Click to expand...
Click to collapse
Thank you!

[Help] Flashing PAC Rom

I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.

S6 Edge UAE model(international version) bricked

Yesterday i tried flashing twrp in 5.1.1 after reboot it shows recovery is not sendroid kind of error then phone went to bootloops after that i flashed a root kernel while phone was in bootloops nothing happened to fix everything i tried flashing stock firmware via odin in sboot. bin odin is giving error please help my phone is stuck in boot loops. any way to flash recovery or to fix bootloops i don't want to lose data thanks in advanced.
Sent from my falcon using Tapatalk
reboot to recovery mode...wipe cache and dalvik cache....and reboot system...but if u cant reboot....try flashing the twrp recovery again.....this time, uncheck auto reboot.....after u flash the twrp recovery...boot to recovery and wipe cache and dalvik cache and reboot system.....i hope it works....if not...please download the firmware with the latest bootloader from sammobile

Galaxy S3 crazy boot loop

hi everybody.
my phone is booting every time. with odin i installed already twrp and cwm. with twrp I can just see the logo and then the phone is booting again. with cwm, i am able to see the menu but when i try to wipe the phone, the phone starts to boot again.
i installed cyanogenmod via adb but the phone is not starting android.
the last chance i have is to hope that someone of you have a solution.
i uploaded a video to show you what i mean.
ht t p : / / s e n dvid.com/u4z3xfu7
thanks
andi
Have you tried flashing a stock ROM?
yes. but it is still in the loop.
Flashing in Odin was successful?
After flashing the stock ROM, did you perform a factory wipe before booting for the first time?
thats not possible. i can boot to the clockworkmod recovery but if i choose the option "wipe data/factory reset" the recovery will be closed and the smartphone boots again and open the recovery.
1, download mode and flash an official stock rom (one package) via odin. Make sure it is for your device specifically.
2, Boot to official stock recovery and wipe data/factory reset. If the phone reboots after this you need to be prepared to key combo to download mode BEFORE it boots android.
3, Flash the official stock rom again.
All remnants of any previous roms will be gone and you should have a booting phone.
Beamed in by telepathy.
It worked with the stock recovery. Now I was able to install cyanogenmod. Thank you very much!!!

Categories

Resources