hi dear friends
i have doogee x5 pro , in twrp i can access otg but in normal mode usb otg not exist . indeed some time ego it was work correctly but now i lost it.
how can i correct it?
and after that ! !! mtp and usb conect lost all ?????????? in pc phone not show and mobile ram not exist in pc?
what happend? can i enable or disable it in recovery mode? twrp . did i mistake in twrp recovery ? what can i must to do now?
thank
Related
Hello everybody,
i dont manage to establish the USB connection with my windows XP.
I got a Lenovo from china, with Android 4.2.1. It´s yet rooted with Kinguser. I also activated the USB debugging mode and installed Lenovo USB drivers on my pc but i dont get any message when i plug the USB cable, it only charges the phone.
I hope you got any ideas!
Thanx and greetings from germany!
LenovoUserP780 said:
Hello everybody,
i dont manage to establish the USB connection with my windows XP.
I got a Lenovo from china, with Android 4.2.1. It´s yet rooted with Kinguser. I also activated the USB debugging mode and installed Lenovo USB drivers on my pc but i dont get any message when i plug the USB cable, it only charges the phone.
I hope you got any ideas!
Thanx and greetings from germany!
Click to expand...
Click to collapse
Hi there! First try this:
1. Change USB Cable
2. Change USB Port!
3. Open device manager
4. Look on port tab ... If it have that + click on it...
5. Now and only now plug the phone Powered ON.
6. on this step you should see Lenovo ADB Device/ Lenovo Composite ADB Device
7. This means that your drivers are installed correctly.
8. If you want to flash firmware you need to install another tipe of drivers!
Hei Stympy,
i´ve tried it step by step but there came no notification that there´s a new ADB Device (
any other Ideas?? Maybe it is a USB Port problem of my phone?
LenovoUserP780 said:
Hei Stympy,
i´ve tried it step by step but there came no notification that there´s a new ADB Device (
any other Ideas?? Maybe it is a USB Port problem of my phone?
Click to expand...
Click to collapse
Hmmm.. This is strange....
You should go to a service store first...
Sent from my Lenovo P780
I planned to flash a custom rom CM12 on my Oppo Neo 5(16gb) But I forgot to enable USB Debug on Developer Options.. The time I flash the TWRP it was not successful and the phone wont turn on at all. It dont display charging when I plug it on my charger.. When I connect it on my laptop is says USB not Recognized and thats the reason I cant flash the firmware to repair the phone .. Pls help guys I created an account here to have some help
poco f1 not recognised in adb windows 10
I unlocked bootloader and re did the USB debugging but the computer wont reconize poco in adb.
I've tried portable and normal and run as admin and installed the drivers but not showing.....any help appreciated
Your PC has an AMD Ryzen?? Try Intel...
ashboe said:
poco f1 not recognised in adb windows 10
I unlocked bootloader and re did the USB debugging but the computer wont reconize poco in adb.
I've tried portable and normal and run as admin and installed the drivers but not showing.....any help appreciated
Click to expand...
Click to collapse
you have to enable MTP (File Transfer) in Pop Up Screen on Phone once the phone is plugged in
ashboe said:
poco f1 not recognised in adb windows 10
I unlocked bootloader and re did the USB debugging but the computer wont reconize poco in adb.
I've tried portable and normal and run as admin and installed the drivers but not showing.....any help appreciated
Click to expand...
Click to collapse
Here's what i did, (not for poco but it worked for mido, kenzo) downloaded mi flash tool and installed the drivers from it's installed directory. And it worked.
fmcheetah said:
you have to enable MTP (File Transfer) in Pop Up Screen on Phone once the phone is plugged in
Click to expand...
Click to collapse
I'm such an idiot! That was it!
Hi guys,
Need your help.. am facing some weired issue with POCO F1 ... with adb..
1. I have enabled the debugging.
2. installed the google drivers.
3. CMD check reflects the adb device.. <some numbers>..
4 When i tried to connect the phone via usb to mi suite or hisuite... they fails to recognize the Phone..
I have intel processor ... and I am able to transfer stuffs via MTP mode.. but the software aren't recognizing.. any suggestions..
I have all this below mentioned files ..
qualcomm_driver-4.zip
TOOL_ALL_IN_ONE_2.0.1.1.zip
usb_driver_r12-windows.zip
XiaomiADBFastbootTools-Win32-master.zip
Xiaomi-UniversalAdbDriver.zip
HiSuite_8.0.1.300_OVE.exe
latest_usb_driver_windows.zip
minimal_adb_fastboot_v1.4.3_setup.exe
MiSetup2.2.0.7032_2717.exe
Does it have anything to do with USB .. is ours 3.0 ?? and 2.0 works ?? is there any setup to be done in mobile ??
Attachment shows --
1. adb with ? mark .. (disconnected device)
2. ADB composite device (now connected device with udpated google driver).
Please guide..
mini2015 said:
Hi guys,
Need your help.. am facing some weired issue with POCO F1 ... with adb..
1. I have enabled the debugging.
2. installed the google drivers.
3. CMD check reflects the adb device.. <some numbers>..
4 When i tried to connect the phone via usb to mi suite or hisuite... they fails to recognize the Phone..
I have intel processor ... and I am able to transfer stuffs via MTP mode.. but the software aren't recognizing.. any suggestions..
I have all this below mentioned files ..
qualcomm_driver-4.zip
TOOL_ALL_IN_ONE_2.0.1.1.zip
usb_driver_r12-windows.zip
XiaomiADBFastbootTools-Win32-master.zip
Xiaomi-UniversalAdbDriver.zip
HiSuite_8.0.1.300_OVE.exe
latest_usb_driver_windows.zip
minimal_adb_fastboot_v1.4.3_setup.exe
MiSetup2.2.0.7032_2717.exe
Does it have anything to do with USB .. is ours 3.0 ?? and 2.0 works ?? is there any setup to be done in mobile ??
Attachment shows --
1. adb with ? mark .. (disconnected device)
2. ADB composite device (now connected device with udpated google driver).
Please guide..
Click to expand...
Click to collapse
My Phone is clean wiped..No OS on it...how can i enable debugging?
Dear all, please help me.. recently I flashed Masik x 5.2 Vince rom and since then my USB OTG is not getting detected on my phone (no notification) plus tried USB OTG checker app and there it says Android compatible USB OTG.. bt if I connect a USB device phone doesn't detects.. Also tried the USB OTG while running TWRP recovery, and there is detects. Please in need of help.. Do reply...
aviz_danny said:
Dear all, please help me.. recently I flashed Masik x 5.2 Vince rom and since then my USB OTG is not getting detected on my phone (no notification) plus tried USB OTG checker app and there it says Android compatible USB OTG.. bt if I connect a USB device phone doesn't detects.. Also tried the USB OTG while running TWRP recovery, and there is detects. Please in need of help.. Do reply...
Click to expand...
Click to collapse
Go to additional settings enable OTG
JR Bautista said:
Go to additional settings enable OTG
Click to expand...
Click to collapse
in which rom are you in ???
aviz_danny said:
in which rom are you in ???[/QUOTEmiui
Click to expand...
Click to collapse
I am also have same problem, but just like you explained in my phone additional setting there is no OTG option...
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
hi, i would reccomend my android TV 7 ROM for nexbox a95x devices, fast & stable, as for device not being detected by burn tool, you've tried multiple ports on your PC & box?
It will be nice if you can provide me a stable rom for my A95x
Can you please provide me some link to download it.
About the burning tool and the ports....i have 2 USB ports. I've try in both of them. In one of the port i'm managing to connect it to the burning tool but after few minutes i'm loosing the connection for unknown reason for me. I'm suspecting that maybe due to a issue with the images with which i try to install with the USB burning tool.
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
I had no problem to install atvx into exactly same device.
Keep a95x disconnected from everything. Press AV button and hold it while you plug usb cable to right usb port. You mustn't plug power cable. Only usb.
You windows will connect to a95x if amlogic tool is running
And if that dosntvwork then you may need to use mask rom mode to force burning tool to see the device
aidanmacgregor said:
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
Click to expand...
Click to collapse
Hi Aidan, I flashed my a95x 2/16 with your rom and it’s just stuck on boot screen, when I try flash again it fails with usb burning tool, any suggestions?