Cannot access recovery mode - Android Q&A, Help & Troubleshooting

I need help! It is the first time I am posting here.
I was surfing the web on my phone and suddenly I started getting error messages "Unfortunately, ....process has stopped!". This applies on all of my apps and services, thus, a dozen of error messages at once. I kept tapping on OK but in vain.
I tried to fight against these error messages to access the Settings to reset my phone but after I reset, I got the droid icon with red exclamation mark on it.
I turned off the phone, pressed Power and Volume Up to access the Recovery Mode. After I pressed Volume Down to access the mode, nothing appeared except the droid icon with red exclamation mark, then after 1 minute, the phone rebooted normally and all these error messages popped up again.
I restarted the phone in Safe Mode but in vain.
I tried to clear cache for DRM service and Media Storage but in vain as well.
A friend told me it's related to eMMC but I did not receive any related message to it. It could be I do not know!
Please help me, how I can get rid of this issue?
Thank you very much!

Well you can use apps to access recovery too. If you have root you can use flashify or titanium backup

D-J Mutant said:
Well you can use apps to access recovery too. If you have root you can use flashify or titanium backup
Click to expand...
Click to collapse
I cannot download when all processes are stopping. I cannot open app as well even if I am transferring from PC..

alij2016 said:
I cannot download when all processes are stopping. I cannot open app as well even if I am transferring from PC..
Click to expand...
Click to collapse
Can you give more info about the phone? Do you use stock ROM?

D-J Mutant said:
Can you give more info about the phone? Do you use stock ROM?
Click to expand...
Click to collapse
Yes stock ROM. Jelly Bean 4.2.2. Huawei Y320

alij2016 said:
Yes stock ROM. Jelly Bean 4.2.2. Huawei Y320
Click to expand...
Click to collapse
Hmmm I dont have experience with Huawei. I know that LG phones can be resetted by using a PC tool , I am not sure if there is anything similar with Huawei...
Though when you do factory reset there is always an exclamation mark if I remember correctly... So maybe just press factory reset and wait until it finishes, it may take enough time.

D-J Mutant said:
Hmmm I dont have experience with Huawei. I know that LG phones can be resetted by using a PC tool , I am not sure if there is anything similar with Huawei...
Though when you do factory reset there is always an exclamation mark if I remember correctly... So maybe just press factory reset and wait until it finishes, it may take enough time.
Click to expand...
Click to collapse
Yes Huawei has HiSuite but my phone is not recognized when plugging even USB debugging is ON.. As all processes have stopped, nothing are working.
Also, I did mention after resetting the phone, nothing happens.. The issue continues...

alij2016 said:
Yes Huawei has HiSuite but my phone is not recognized when plugging even USB debugging is ON.. As all processes have stopped, nothing are working.
Also, I did mention after resetting the phone, nothing happens.. The issue continues...
Click to expand...
Click to collapse
Have you installed phone's drivers on PC?

D-J Mutant said:
Have you installed phone's drivers on PC?
Click to expand...
Click to collapse
I don't need to as it did recognize it before... It's just plug and play..

Well then your only solution is just try again entering recovery with buttons and flash a new ROM but if still nothing happens maybe its hardware problem.
Also do you remember when this problem appeared or it was like this since you bought the phone?

I just wiped it but the issue still present... So, after reset or wipe, the poblem is not solved..

Related

atrix not booting up properly

my stock gingerbread atrix is not booting properly at all. the android system will not load. has anyone ever heard of this problem, i've restarted countless times and it still happens. any help is very thankful
turnernader said:
my stock gingerbread atrix is not booting properly at all. the android system will not load. has anyone ever heard of this problem, i've restarted countless times and it still happens. any help is very thankful
Click to expand...
Click to collapse
You will have to be more specific than this...
Have you tried wiping Cache Partition and/or Dalvik Cache
When i boot the phone it never fully boots, when it finally gets to my lock screen the android system does not load. I can't do anything at all. I havent tried to root or anything. it just started and there was no reason why
the phone has finally booted to where my homepage would be but its a black screen that says android system on it and thats all. i can get to no apps or anything,
Im going too take a wild guess and say you either tried too install cwm without being rooted or u did not properly unlock your bootloadeR. Which is the case? Because this would not just happen did u read this http://forum.xda-developers.com/showthread.php?t=1302423
turnernader said:
the phone has finally booted to where my homepage would be but its a black screen that says android system on it and thats all. i can get to no apps or anything,
Click to expand...
Click to collapse
You might have to use rsd lite to flash a stock rom. If you look thru the posts in the dev section you will find what your looking for. I believe the post is labeled but don't quote me, how to root after sbf flash. I know it's something like that.
Read up on using rsd lite it's very easy once you read about it.
Best of luck to you.
If I can be of any further help feel free to pm me and I'll do my very best.
Don
Sent from my MB865
i can honestly say that i did not try to install anything on it. the phone was running a little slow as i was installing an app so i turned it off after it was done downloading and when i went to start it back up this happened. i was not trying to root or anything
turnernader said:
i can honestly say that i did not try to install anything on it. the phone was running a little slow as i was installing an app so i turned it off after it was done downloading and when i went to start it back up this happened. i was not trying to root or anything
Click to expand...
Click to collapse
Sounds like you should factory reset.
Turn off phone
Hold volume down and press power
Continue holding volume down until it says fastboot in upper left corner
Release volume down
Press volume down until you get android recovery in upper left corner
Press volume up
Find factory reset option ( not sure where since I don't have factory recovery anymore)
sent via tapatalk from my CM7 Atrix

my at&t not just died?

i wiped everything including a factory reset then installed liquid rc8 i used correct one for my phone it rebooted but never booted up to the samsung logo doesnt seem to vibrate or anything when i press power wtf?
now when i plug it into pc it shows my external drive then it vanishes then re-appaears and tells me to format it but that doesnt work either
Put in download mode and Odin back to stock.
How full was your battery when you started? May have drained it
Sent from my SAMSUNG-SGH-I717 using xda premium
leo5111 said:
i wiped everything including a factory reset then installed liquid rc8 i used correct one for my phone it rebooted but never booted up to the samsung logo doesnt seem to vibrate or anything when i press power wtf?
Click to expand...
Click to collapse
If you can get back into recovery mode, try reflashing the rom or flashing another rom. I've had cases where a rom just wouldn't work for me (I too, have the AT&T Note). Never had the patience to try to figure out why. I usually try to flash several times (making sure I do a factory wipe) but if it still didn't work, I would just flash another rom.
If you can't get into recovery mode, then you may need to flash a stock rom via ODIN (in download mode) and then start all over from scratch (root the phone, install CMW or TWRP,flash custom rom, etc.). Please search the forums for a stock rom and all the files / instructions on flashing via ODIN if you aren't already familiar with it.
Since your PC recognizes the phone to some degree (it at least recognizes that the phone was connected and interacts with the sd card), it sounds like you have a soft brick which is fixable via one of the methods above. If your phone was hard bricked, then the PC more than likely wouldn't recognize it at all, it would do absolutely nothing and you would basically have a paper weight. It doesn't sound like you have a hard brick.
If anyone else has more insight, please chime in. I'm definitely no expert here.
it wont even light up to samsung logo or even vibrate also the sd is recognised but it randomly connects and disconnects odin does not see phone
leo5111 said:
it wont even light up to samsung logo or even vibrate also the sd is recognised but it randomly connects and disconnects odin does not see phone
Click to expand...
Click to collapse
Perhaps your cable is defective. All of my cables eventually get to the point where I have to twist them and hold them a certain way to work. When that happens I know it's time to replace the cable. You may just need to use another cable.
no i tried with 2 differnt cables also battery was at like 99% when this happened also windows keeps finding my sd for a moment and then vanishes could this be stuck power button? if so i dont see how i didnt touch power button when it rebooted
show tnsraet
leo5111 said:
no i tried with 2 differnt cables also battery was at like 99% when this happened also windows keeps finding my sd for a moment and then vanishes could this be stuck power button? if so i dont see how i didnt touch power button when it rebooted
Click to expand...
Click to collapse
having the exact same issue, did you get this resolved?
Dark_lupus said:
having the exact same issue, did you get this resolved?
Click to expand...
Click to collapse
in star trek speak, she,s dead jim :crying:
leo5111 said:
in star trek speak, she,s dead jim :crying:
Click to expand...
Click to collapse
I'm sorry man hopefully I can fix mine I've been told I performed my whole process of flashing roms right but I don't understand why my phones dont work one new and the other a couple months old...
I put up a thread but not much help from anybody.
Hummmm this just don't sound right.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Black update killed my 920

I installed the black update for my 920 & afterwards it completely froze up at the lock screen. So I rebooted it using the held down power button & down volume key method & the same thing happened & kept happening no matter how many times I tried this. So I tried powering it off in small moment it was active & the same thing happened it froze on shutdown with the goodbye message now permanently stuck on the screen.
Anyone know how I can recover my 920 in these circumstances?
Super Chimp said:
I installed the black update for my 920 & afterwards it completely froze up at the lock screen. So I rebooted it using the held down power button & down volume key method & the same thing happened & kept happening no matter how many times I tried this. So I tried powering it off in small moment it was active & the same thing happened it froze on shutdown with the goodbye message now permanently stuck on the screen.
Anyone know how I can recover my 920 in these circumstances?
Click to expand...
Click to collapse
yes... flash it again...
easy way is with NSU
http://nds2.fds-fire.nokia.com/fds_fire/1310/0909/7297834135/NokiaSoftwareUpdaterForRetail_4.1.0.exe
hope you backup your data from phone before...
dxdy said:
yes... flash it again...
easy way is with NSU
http://nds2.fds-fire.nokia.com/fds_fire/1310/0909/7297834135/NokiaSoftwareUpdaterForRetail_4.1.0.exe
hope you backup your data from phone before...
Click to expand...
Click to collapse
Thanks for the link.
I wondered why it happened is the install corrupted?
maybe some error on memory or maybe battery is low and during flashing shut down phone... this happened to some people...
Super Chimp said:
I installed the black update for my 920 & afterwards it completely froze up at the lock screen. So I rebooted it using the held down power button & down volume key method & the same thing happened & kept happening no matter how many times I tried this. So I tried powering it off in small moment it was active & the same thing happened it froze on shutdown with the goodbye message now permanently stuck on the screen.
Anyone know how I can recover my 920 in these circumstances?
Click to expand...
Click to collapse
if you did the OTA update, after the first reboot, it then loads the initial lock screen, you should have been able to unlock it. At this point you'll get a screen that says "migrating data" This usually takes about 5-10 minutes depending on how much storage you have in use. Then it reboots again and you're up an running.
May have just been a bad / corrupt file, but the manual flash should fix everything.
I wonder if it was because I got a service message from my network at the same time as it saw it as a new handset.
Sorry for the double post but just to say NSU did the trick oddly it didn't install the latest software as afterwards it was still saying there was an update to install on the phone update on the phone itself. Would think this update would come from the same servers.
Guys can yo tell me what are the differences between plain custom ROM and Roger's ROM..
Well I tried to do the update twice more with the same result each time.
Anyone any ideas on this?
Super Chimp said:
Well I tried to do the update twice more with the same result each time.
Anyone any ideas on this?
Click to expand...
Click to collapse
Do you update the device while charging the phone?
Sent from my GT-I9500 using Tapatalk 4
milton.bain said:
Do you update the device while charging the phone?
Sent from my GT-I9500 using Tapatalk 4
Click to expand...
Click to collapse
No. Unless you count any slow trickle charge from the PC whilst flashing. TBH because of all the reboots I had lost track of the battery charge on the last flashing attempt.
Latest is on the latest flashing attempt it updated it to Black over NSU. Some of the apps seem OK, some open but freeze & others such as the camera & messaging seem to be missing. Also every time I turn it off it freezes up & has to be rebooted.
Just what is going on with it?
Is there anyway of getting the NSU to re-install the Amber software rather than keep trying to upgrade to the Black version?
Super Chimp said:
Sorry for the double post but just to say NSU did the trick oddly it didn't install the latest software as afterwards it was still saying there was an update to install on the phone update on the phone itself. Would think this update would come from the same servers.
Click to expand...
Click to collapse
Yes it may be that you were no outdated. NSU re-install the latest version available of your Hard Product Code of your device, since/from the Nokia Server. But that does not mean that you have the latest update as Lumia Black, for example.
Abhishek606 said:
Guys can yo tell me what are the differences between plain custom ROM and Roger's ROM..
Click to expand...
Click to collapse
Roger's is the official rom for devices sold by Roger's, custom is the rom developed by people unofficially authorized by Micro$soft or Nokia.

[Q] Phone is dead. Please help.

I have an E970 which I have loved over the past 16 months. Love it. It's not rooted or modded in any way, but I had it set up real nice.
I was at the hospital emergency room yesterday visiting someone and had some time to kill, so I updated some apps that needed updating. I did this over LTE, not hospital WIFI. I mention this because of what happened next.
Last night I started getting an error message when I attempted to get into the settings: "unfortunately settings has stopped." Everything else looked normal at this point.
Of course, the first thing I did was reboot and there was no change.
So, I did a little research and the suggestion was:
1) something you installed or updated last messed it up, try uninstalling the updates.
2) try putting the phone into safe mode and see if it works.
So I uninstalled the apps I had updated while at the hospital. Swiftkey keyboard, Chrome, Dolphin, the MyAT&T app (never used), and some others. About 12 in all. No dice, settings was still not working.
So after another reboot, I put the phone into safe mode (which I didn't know existed on Android). It took a long time to reboot into safe mode, much longer than a normal reboot. Settings was still not working. Same errror. Thats when things got worse.
Rebooted back out of safe mode. It still took a long time to reboot. Now not only does settings not work, but now the notification area on the top of the screen is gone, the notiication shade is now gone, and long pressing home does not bring up task manager. I am able to get into the settings for the home screen and the lock screen via the menu key. I cannot access sound settings or wifi or anything else in settings. I also lost my wallpaper. The LG launcher was still working as was the LG lock screen. All else looks fine, my MMS, contacts, email, etc.
This morning, I tried rebooting again. Now the phone won't boot past the white AT&T logo after the animation and sound plays.
I tried removing the sim and the sd card. No change. No boot.
What the hell happened to my phone and what should I do?
At this point I realize I'm probably going to lose everything in my phone memory, and I'm at peace with that. I had my photos and media all on my SD card, but my contacts and my text messages from the last 16 months are going to be gone.
I am not versed in rooting or recovery, though I am actually very technical. I would appreciate any assistance anyone could give. Thank you.
jaytee23 said:
I have an E970 which I have loved over the past 16 months. Love it. It's not rooted or modded in any way, but I had it set up real nice.
I was at the hospital emergency room yesterday visiting someone and had some time to kill, so I updated some apps that needed updating. I did this over LTE, not hospital WIFI. I mention this because of what happened next.
Last night I started getting an error message when I attempted to get into the settings: "unfortunately settings has stopped." Everything else looked normal at this point.
Of course, the first thing I did was reboot and there was no change.
So, I did a little research and the suggestion was:
1) something you installed or updated last messed it up, try uninstalling the updates.
2) try putting the phone into safe mode and see if it works.
So I uninstalled the apps I had updated while at the hospital. Swiftkey keyboard, Chrome, Dolphin, the MyAT&T app (never used), and some others. About 12 in all. No dice, settings was still not working.
So after another reboot, I put the phone into safe mode (which I didn't know existed on Android). It took a long time to reboot into safe mode, much longer than a normal reboot. Settings was still not working. Same errror. Thats when things got worse.
Rebooted back out of safe mode. It still took a long time to reboot. Now not only does settings not work, but now the notification area on the top of the screen is gone, the notiication shade is now gone, and long pressing home does not bring up task manager. I am able to get into the settings for the home screen and the lock screen via the menu key. I cannot access sound settings or wifi or anything else in settings. I also lost my wallpaper. The LG launcher was still working as was the LG lock screen. All else looks fine, my MMS, contacts, email, etc.
This morning, I tried rebooting again. Now the phone won't boot past the white AT&T logo after the animation and sound plays.
I tried removing the sim and the sd card. No change. No boot.
What the hell happened to my phone and what should I do?
At this point I realize I'm probably going to lose everything in my phone memory, and I'm at peace with that. I had my photos and media all on my SD card, but my contacts and my text messages from the last 16 months are going to be gone.
I am not versed in rooting or recovery, though I am actually very technical. I would appreciate any assistance anyone could give. Thank you.
Click to expand...
Click to collapse
Two option that I can think are a factory reset and restoring with a program named lgnpst.
Factory reset would be simplest if it works, but will definitely wipe your phone.
Using lgnpst usually doesn't wipe the phone. Let me know how you want to proceed.
adfurgerson said:
Two option that I can think are a factory reset and restoring with a program named lgnpst.
Factory reset would be simplest if it works, but will definitely wipe your phone.
Using lgnpst usually doesn't wipe the phone. Let me know how you want to proceed.
Click to expand...
Click to collapse
First of all, thank you very much for replying!
LGNPST doesn't wipe the phone? Well, I'm all for that if it works. Boy, I thought for sure I was 100% going to lose everything. Now at least maybe there is a tiny chance of not losing everything.
I had joined the lg-optimus-g irc and user autoprime directed me to the guide there. I downloaded and installed tSilenzio's Automated LGNPST already. I was going to use it to flash the stock rom, but I didn't do that yet. Is that what you need me to do with LGNPST, flash the stock rom or does LGNPST have other options? Please let me know, I'll wait for your reply, sir!
jaytee23 said:
First of all, thank you very much for replying!
LGNPST doesn't wipe the phone? Well, I'm all for that if it works. Boy, I thought for sure I was 100% going to lose everything. Now at least maybe there is a tiny chance of not losing everything.
I had joined the lg-optimus-g irc and user autoprime directed me to the guide there. I downloaded and installed tSilenzio's Automated LGNPST already. I was going to use it to flash the stock rom, but I didn't do that yet. Is that what you need me to do with LGNPST, flash the stock rom or does LGNPST have other options? Please let me know, I'll wait for your reply, sir!
Click to expand...
Click to collapse
I would use the stock firmware posted by g33k3r, it is a zip that contains a tot file which you rename to .bin for use with lgnpst. If afterwards you want to try custom ROMs we can go from there.
adfurgerson said:
I would use the stock firmware posted by g33k3r, it is a zip that contains a tot file which you rename to .bin for use with lgnpst. If afterwards you want to try custom ROMs we can go from there.
Click to expand...
Click to collapse
I'm downloading LGE970ATT-V20j-Stock.bin.zip right now. It's a super slow download though...
Let me see if I can find the one from g33k3r...
jaytee23 said:
I'm downloading LGE970ATT-V20j-Stock.bin.zip right now. It's a super slow download though...
Let me see if I can find the one from g33k3r...
Click to expand...
Click to collapse
http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
adfurgerson said:
I would use the stock firmware posted by g33k3r, it is a zip that contains a tot file which you rename to .bin for use with lgnpst. If afterwards you want to try custom ROMs we can go from there.
Click to expand...
Click to collapse
Is this the file you wanted me to dl?
LGE970AT-01-V20j-310-410-MAR-08-2013.zip
adfurgerson said:
http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
Click to expand...
Click to collapse
I found it just before you posted that... DLing now.....
So flashing this *may* repair my phone without losing everything? I'm guessing it will overwrite all the Android OS, LG and AT&T files?
jaytee23 said:
Is this the file you wanted me to dl?
LGE970AT-01-V20j-310-410-MAR-08-2013.zip
Click to expand...
Click to collapse
Is it a .tot file when unzipped? If so it should be right.
adfurgerson said:
http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
Click to expand...
Click to collapse
got it, unzipping now... I also need to reboot my PC since I haven't done that since installing LGNPST...
adfurgerson said:
Is it a .tot file when unzipped? If so it should be right.
Click to expand...
Click to collapse
aw crap, i just ran LGNPST and the com port is not showing up.. the instructions say that a com port should show up in the list
adfurgerson said:
Is it a .tot file when unzipped? If so it should be right.
Click to expand...
Click to collapse
or does the com port only show up when the phone is attached?
jaytee23 said:
aw crap, i just ran LGNPST and the com port is not showing up.. the instructions say that a com port should show up in the list
Click to expand...
Click to collapse
Is your phone in download mode?
Edit just seen second post yes connect phone to PC and enter download mode.
adfurgerson said:
Is your phone in download mode?
Edit just seen second post yes connect phone to PC and enter download mode.
Click to expand...
Click to collapse
on it... hold on...
adfurgerson said:
Is your phone in download mode?
Edit just seen second post yes connect phone to PC and enter download mode.
Click to expand...
Click to collapse
okay, the phone is in download mode and plugged in... it showed up in LGNPST on COM4
adfurgerson said:
Is your phone in download mode?
Edit just seen second post yes connect phone to PC and enter download mode.
Click to expand...
Click to collapse
I selected the DLL and the BIN file.. i'm guessing i'm ready for the transfer?
adfurgerson said:
Is your phone in download mode?
Edit just seen second post yes connect phone to PC and enter download mode.
Click to expand...
Click to collapse
is there a way to use LGNPST to try to back up my phone book before I flash this?
adfurgerson said:
Is your phone in download mode?
Edit just seen second post yes connect phone to PC and enter download mode.
Click to expand...
Click to collapse
I think i'm screwed.. I did the flash, it rebooted, but is stuck on white AT&T screen...
I think I have to do the factory reset.
well, that's it. did the factory reset. that worked.
>sigh<
the only stuff I wish I could have saved would have been the contacts and the text messages. They are gone now.
Thank you, adfurgerson, for the hand holding. I appreciate it!
jaytee23 said:
got it, unzipping now... I also need to reboot my PC since I haven't done that since installing LGNPST...
Click to expand...
Click to collapse
Sorry I didn't reply back of was set for email alerts but they didn't come through. Your contacts don't sync to google.?

[Q] Can't factory reset Galaxy Tab 2

I have a samsung galaxy tab 2 GTP3100. today it suddenly started to restart in every few minutes.
I tried to uninstall lastly installed app, but the device restarted every time I tried to do something with it. Then i tried to reset it from the settings>>backup & Restore. but no gain. the device was as it was before.
then i tried with system recovery mode. it opened with an error message
did not match sized 'system/csc/common/system/csc/default_workplace.xml' (No data found)
despite tht I performed "wipe data/factory reset" and "wipe cache partition"
it said to have completed the above operation, no further error message. I rebooted the system... but no gain.. same as before.. not a single change. and the "restarting problem" was ther.
Could anyone please help me?
thank you in advance
pritish.sahoo said:
I have a samsung galaxy tab 2 GTP3100. today it suddenly started to restart in every few minutes.
I tried to uninstall lastly installed app, but the device restarted every time I tried to do something with it. Then i tried to reset it from the settings>>backup & Restore. but no gain. the device was as it was before.
then i tried with system recovery mode. it opened with an error message
did not match sized 'system/csc/common/system/csc/default_workplace.xml' (No data found)
despite tht I performed "wipe data/factory reset" and "wipe cache partition"
it said to have completed the above operation, no further error message. I rebooted the system... but no gain.. same as before.. not a single change. and the "restarting problem" was ther.
Could anyone please help me?
thank you in advance
Click to expand...
Click to collapse
I would re-install the stock firmware with Odin, then reset.
es0tericcha0s said:
I would re-install the stock firmware with Odin, then reset.
Click to expand...
Click to collapse
Thanks for your reply.
I have tried with ODIN. even the local service station guy couldn't fix it.
In download mode, it took forever but to download the package.
could it be any Hardware problem? I don't think so. because I can play movies and music before it restarts again.
pritish.sahoo said:
Thanks for your reply.
I have tried with ODIN. even the local service station guy couldn't fix it.
In download mode, it took forever but to download the package.
could it be any Hardware problem? I don't think so. because I can play movies and music before it restarts again.
Click to expand...
Click to collapse
I'm not sure what is relevant about the time it took to download the file...?
What happened while installing the firmware via Odin? Did it finish? Did it have errors?
Next option would be to try to install a custom recovery and use that to reset the phone or install a custom rom.
es0tericcha0s said:
I'm not sure what is relevant about the time it took to download the file...?
What happened while installing the firmware via Odin? Did it finish? Did it have errors?
Next option would be to try to install a custom recovery and use that to reset the phone or install a custom rom.
Click to expand...
Click to collapse
the package didn't download at all. It stuck in the very beginning. i waited almost an hour then stopped trying.
pritish.sahoo said:
the package didn't download at all. It stuck in the very beginning. i waited almost an hour then stopped trying.
Click to expand...
Click to collapse
If the package didn't download, then what would Odin have to flash that it would fail at?
es0tericcha0s said:
If the package didn't download, then what would Odin have to flash that it would fail at?
Click to expand...
Click to collapse
I m clueless. Is there any other way to fix it?
Reach your nearest Service centre
pritish.sahoo said:
I m clueless. Is there any other way to fix it?
Click to expand...
Click to collapse
As per the Senior Member has described, it is the best way to resent the tab. But as you are not able to administer the odin, I will suggest you to get your mobile reset from the Service centre in your locality. By default, to reset the tab you have to press the volume down button and then gently press the menu button. It will show the option of wipe.
As you are saying that it is not working, I think service centre is the best option.
rudrapratap03 said:
As per the Senior Member has described, it is the best way to resent the tab. But as you are not able to administer the odin, I will suggest you to get your mobile reset from the Service centre in your locality. By default, to reset the tab you have to press the volume down button and then gently press the menu button. It will show the option of wipe.
As you are saying that it is not working, I think service centre is the best option.
Click to expand...
Click to collapse
rudrapratap03, thanks for your reply
I would like to tell you that i went to the service station, the technician also failed to reset the device in Odin mode. and suggested me to change the board. I don't think there would be any hardware problem as I could use the device to play music and videos, before it restarts itself again. I could read books for hour (if i do the reading only).
What are you clueless on? Whether or not you downloaded the file? I'm not sure how that part is confusing. Or are you talking about that you put it in Download Mode and then Odin didn't do anything? If that is the case, then without telling us what Odin was doing or what the log said, then how do you expect anyone to be able to help troubleshoot?

Categories

Resources