Below is the official RUU. This zip can be flashed via fastboot/RUU mode or via SD card. It is NOT rooted.
Flashing this ruu will NOT affect s-status or lock status.
This will be especially useful for users who want to relock/s-on in order to sell or return their phone. Once you have your bootloader locked and tamper flag cleared you can turn s on. Then you can flash this RUU to remove any/all traces of root. This ruu WILL NOT wipe internal storage or data. This RUU is NOT ROOTED! This also can be beneficial for going back to stock to take an OTA.
Remember - You cannot downgrade firmware unless s-off!!!
Option 1
Download the RUU.zip file. Rename the zip file to 2PS6IMG.zip (being careful that you have file extensions turned on, or are aware that it could be renamed to 2PS6IMG.zip.zip, which is bad) Copy 2PS6IMG.zip to root of a physical SD formatted to fat32 or exfat! No internal storage!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
Option 2
EXE option. Download EXE file below (for windows) and simply double click to start. You can either be booted to OS with USB debugging enabled OR booted into download mode for this to start.
Option 3
Fastboot RUU mode . This method assumes you have a working ADB/Fastboot directory on your PC. Download RUU zip file and place in your working fastboot/adb directory. Boot your phone to download mode and connect to PC. Issue the following commands.
htc_fastboot oem rebootRUU
###while in this mode your phone will display an HTC logo on the screen
htc_fastboot flash zip 2PS6IMG.zip
##while in this mode you will see an HTC logo on the screen and a green status bar across the bottom of the screen. When command output ##completes it may say reboot required to flush etc... if that's the case issue a "htc_fastboot reboot-bootloader" command and restart option 1 again.
## assuming flash completes and no further flushing/reboots are requested from the cmd output you can now reboot IF you simply wish to reboot the system you can issue "htc_fastboot reboot" which will reboot system.
## expect a good 5 minute plus first boot!
Downloads (Do NOT mirror these elsewhere)
2.41.605.36 Thanks to @Kisakuku THIS RUU WIPES DATA
RUU.zip
https://androidfilehost.com/?fid=745849072291696108
2.41.605.30 Thanks to @Kisakuku THIS RUU WIPES DATA
RUU.zip
https://androidfilehost.com/?fid=673791459329060006
2.41.605.23 Thanks to @Kisakuku THIS RUU WIPES DATA
RUU.zip
https://www.androidfilehost.com/?fid=962021903579481124
2.41.605.20 Thanks to @Kisakuku THIS RUU WIPES DATA
RUU.zip
https://www.androidfilehost.com/?fid=961840155545582647
2.41.605.18 Thanks to @Kisakuku and @sergos1221 THIS RUU WIPES DATA
RUU.zip
https://www.androidfilehost.com/?fid=889764386195900740
2.41.605.12 Thanks to @sergos1221 THIS RUU WIPES DATA
RUU.zip
https://www.androidfilehost.com/?fid=457095661767154725
1.85.605.9
RUU.zip
https://www.androidfilehost.com/?fid=385035244224411393
1.85.605.8
RUU.zip
https://www.androidfilehost.com/?fid=529152257862670562
RUU.exe
https://www.androidfilehost.com/?fid=385035244224387725
HBoot.zip
https://www.androidfilehost.com/?fid=529152257862670563
1.82.605.6
RUU.zip
https://www.androidfilehost.com/?fid=24686679545611183
RUU.exe
https://www.androidfilehost.com/?fid=24588232905724031
HBoot.zip
https://www.androidfilehost.com/?fid=24686679545611173
1.19.605.22
RUU.zip
-https://www.androidfilehost.com/?fid=24572369360126079
RUU EXE
-https://www.androidfilehost.com/?fid=24572369360126081
Firmware only (signed)
-https://www.androidfilehost.com/?fid=24566466246344989
Firmware minus BOOT/RECOVERY
-https://www.androidfilehost.com/?fid=24588212152303812
Radio
-https://www.androidfilehost.com/?fid=24572369360126133
1.19.605.9 (launch firmware)
RUU.zip
-https://www.androidfilehost.com/?fid=24545070682210328
RUU EXE
-https://www.androidfilehost.com/?fid=24545065934258324
Firmware only (signed)
-https://www.androidfilehost.com/?fid=24545070682210435
Original Radio
-https://www.androidfilehost.com/?fid=24539885398392983
Fastboot/adb zip that works for this phone
- https://www.androidfilehost.com/?fid=24545065934258327
Reserved
Nice one! Just need one for the UK now
Very nice, always good to have these when folks get stuck!
hey dot what cid and mid does the verizon m10 use?
nevermind i found it in your hboot zip on androidfilehost thanks for all you do man!
modelid: 2PS650000
cidnum: VZW__001
Curious. Could this be used to convert an unlocked soff'd into a vzw variant?
Verizon Official RUU 1.19.605.9
rsa 329 said:
Curious. Could this be used to convert an unlocked soff'd into a vzw variant?
Click to expand...
Click to collapse
Thats what I am going to attempt today. We need to obtain Super CID first I believe
---------- Post added at 04:52 PM ---------- Previous post was at 04:38 PM ----------
D, Just want to verify, I want to be able to flash this and then flash the Super SU so I can have a stock VZW rooted Unlocked HTC 10. Is this the order I should go in A: My first step should be obtain Super CID with guide here: http://forum.xda-developers.com/htc-10/how-to/guide-supercid-htc-10-t3374484,
B: Then I should be able to flash this RUU via adb while phone is in fastboot correct? Then plug in numbers needed using my new Super CID access? Is there anything I should look out for as far as in encryption? Im also assuming that I will need to flash TWRP/ and SuperSU once again after RUU flash?
Aloha Dottat,
I know you're strictly a VZW person, however is there a possibility of you making a RUU for the latest unlocked US version... 1.21.617.3 or 1.53.617.5 and post it for us to help out in the US unlocked community? I know based on your skills and proven past performance the unlocked community would be forever thankful!
Mahalo Bro..
Virus said:
hey dot what cid and mid does the verizon m10 use?
Click to expand...
Click to collapse
guessing you planned to try converting as well. Have you tried it yet?
dottat said:
guessing you planned to try converting as well. Have you tried it yet?
Click to expand...
Click to collapse
yeh i changed both and then flashed from sdcard in download mode i still had soff and unlocked bootloader worked like a charm! now im pulling all the carrier files and porting over leedroid
btw 4g is way faster on the stock verizon rom if your on a unlocked version using vzw sim!
Virus said:
yeh i changed both and then flashed from sdcard in download mode i still had soff and unlocked bootloader worked like a charm! now im pulling all the carrier files and porting over leedroid
Click to expand...
Click to collapse
That sounds awesome Virus! Cant wait to try it!
Virus said:
yeh i changed both and then flashed from sdcard in download mode i still had soff and unlocked bootloader worked like a charm! now im pulling all the carrier files and porting over leedroid
Click to expand...
Click to collapse
Perfect! I figured it would flash no problem. Much easier way to get an s-off/unlocked vzw phone now...
guys Ive goy the RUU copied to my fastboot dir, and am in download mode and it will not flash? Do I need to change the name of the file perhaps to 2PS6IMG?
awareunlikeu said:
guys Ive goy the RUU copied to my fastboot dir, and am in download mode and it will not flash? Do I need to change the name of the file perhaps to 2PS6IMG?
Click to expand...
Click to collapse
show me your command line output
dottat said:
show me your command line output
Click to expand...
Click to collapse
While in download mode, using command: HTC_fastboot flash zip 2PS6IMG.zip
and get HTC_fastboot is not recognized
Even tried dragging the zip into the command line and still no go
SHould I be in bootloader mode instead?
awareunlikeu said:
While in download mode, using command: HTC_fastboot flash zip 2PS6IMG.zip
and get HTC_fastboot is not recognized
Even tried dragging the zip into the command line and still no go
SHould I be in bootloader mode instead?
Click to expand...
Click to collapse
what is your fastboot named? i think its htc_fastboot you have a typo
Virus said:
what is your fastboot named? i think its htc_fastboot you have a typo
Click to expand...
Click to collapse
K going to reboot PC and retry. Going to try via SD card method next if I cant get fastboot to take. For SD method, it needs to be in Download mode or Fastboot mode?
awareunlikeu said:
K going to reboot PC and retry. Going to try via SD card method next if I cant get fastboot to take. For SD method, it needs to be in Download mode or Fastboot mode?
Click to expand...
Click to collapse
just rename it to 2PS6IMG.zip put on the root of your sdcard boot into download mode and then it will prompt you to hit volume up
Virus said:
just rename it to 2PS6IMG.zip put on the root of your sdcard boot into download mode and then it will prompt you to hit volume up
Click to expand...
Click to collapse
Will do Virus, thanks. Also cant wait to get a hold of a rom made for us VZW guys with the Unlocked 10!
Related
hi all
Forgot to charge my EVO 3D (CDMA) and battery completely drained. Even after using another fully charged battery my phone goes to bootloop - just shows the HTC logo and reboots again and again. Here is what I have:
hboot : 1.5 (S-ON)
radio : 1.06.00.1216
ota : 2_17.651_5
(I am using this phone in India activated on Reliance)
As the phone doesn't boot I can't access it thru adb to give command 'adb reboot bootloader'
I can get bootloader by pressing vol_down+power
When I run the 2_17.651_5 RUU (exe) from my computer while phone is on fastboot, it completes successfully without errors. But still on reboot it just stays at the htc screen and reboots (guess it's becoz stock kernel not getting flashed as the phone is s-on)
kindly help to get back my phone boot again
thanks and regards
ananth
R.I.P
Sent from my HTC.EVO.3D.Xda Premium
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
jdeoxys said:
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
Click to expand...
Click to collapse
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
ananth001 said:
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
Click to expand...
Click to collapse
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Sent from my PG86100 using Tapatalk
megabiteg said:
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Click to expand...
Click to collapse
thanks. extracted boot.img from freeza's kernel and flashed from fastboot after unlocking. But still doesnt solve problem. Can you give me a link for boot.img
Pleassssssse HELP !!!!!!
I have the exactly the same problem, a full reboot result in boot loop, and can not fix it by now.
I guest the phone is rooted before OTA, so OTA can not flash kernel successfully because the wrong signature, and the phone will not boot because the wrong kernel.
I have tried ruu, fastboot boot recovery.img and etc, all failed.
The key point is that, the phone is rooted and you tried OTA. HTC OTA must have a stupid bug, it can not recovery from a partial update, or automatically roll back becasuse of the partial update, dem!
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
ananth001 said:
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
Click to expand...
Click to collapse
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I wonder the same thing all I saw was 1.5
Sent from my PG86100 using xda premium
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Reliance has both CDMA as well as GSM service in India. Mine is a Reliance CDMA MDN.
thanks and regards
reaper24 said:
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Click to expand...
Click to collapse
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
ananth001 said:
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
Click to expand...
Click to collapse
Have you tried to just run the RUU like you said boot turn debug on .... Then go to hboot flash your recovery...
Then fastboot boot recovery.img.
This should work I have unrooted my phone 3 times already in the past month Trial and Error on my part adb always found my phone...
I am tryin to figure out what is going wrong on the last part with TWRP...
Since you said after you do that it was a no go? What happend ? Adb should still be working since you just flashed the recovery...
Anyways I hope you get it solved man I am tryin to figure this problem out.
Do you have a rom already ready to be flashed on your SD card?
Problem is, since i’m not able to android boot I can't reboot bootloader from adb, as I can't connect adb without the phone normal booting. When I boot it just stays at the HTC white screen.
I have flashed twrp recovery from fastboot, but when I give command 'fastboot boot <twrpxxxxx>.img it just boots back to the HTC splash screen
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Android Cowboy said:
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Click to expand...
Click to collapse
As I mentioned in earlier post, have tried flashing PG86IMG.zip from bootloader, but still phone doesn't boot properly and is in a bootloop.
You've used the following file and done these exact steps and allowed the phone to boot to full stock OS? (assuming 2.17.651.5 is correct version)
OPTION 2 - RUU.zip info:
I prefer the .exe version but xHausx’s “FULL” PG86IMG_2.17.651.5.zip may work for you (must be renamed PG86IMG.zip). Make sure you have plenty of battery/charge left!
- (XDA) Xhausx full PG86IMG.zip RUU images (651.5 zips)
PG86IMG_2.17.651.5.zip http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564
MD5: 8F82C2D8F98C077AF775266064BACB5D
From Scrosler's zip Directions : http://forums.androidcentral.com/htc-evo-3d-rooting-roms-hacks/107641-how-return-100-stock-all-versions.html
Scrosler; said:
USE ONLY FOR EMERGENCY PURPOSES. THIS OVERWRITES EVERYTHING!!!!
**THIS WILL RETURN YOU TO FRESH OUT OF THE BOX**
You will not need any special drivers loaded, etc...
1.Download the stock ROM ZIP image from here: and rename it "PG86IMG.zip"
2.Copy it to SD Card
3.Reboot phone into hboot mode by holding volume down and then press power.
Keep volume down held until you boot into hboot mode.
4.In hboot mode the phone will scan the SD card with the image. Once it finds it will ask you if you want to update. Press "Power" to update.
5.Wait.... For a while. When it gets to "system" it will loop a few times. Its quite nerve wracking actually but after about 5 or 6 times it will complete.
6.Once the entire flash is complete it will prompt you to "press power to reboot." Press power and your phone will reboot to 100% stock ROM.
Click to expand...
Click to collapse
Hello, I am unable to get into recovery or in my rom. I can getting into the bootloader, but cannot get into recovery. I am on 1.50 HBOOT and phone is unlocked. I would like to get back to stock so I can do an OTA update. Any help would be great, please let me know if you need more information.
XcsaS said:
Hello, I am unable to get into recovery or in my rom. I can getting into the bootloader, but cannot get into recovery. I am on 1.50 HBOOT and phone is unlocked. I would like to get back to stock so I can do an OTA update. Any help would be great, please let me know if you need more information.
Click to expand...
Click to collapse
What happend to your recovery? Also you need to fastboot oem lock while in hboot using adb
If you wanna go stock you will need the RUU exe you can find this in footballs post in the dev section...
reaper24 said:
What happend to your recovery? Also you need to fastboot oem lock while in hboot using adb
If you wanna go stock you will need the RUU exe you can find this in footballs post in the dev section...
Click to expand...
Click to collapse
not sure what happened with recovery, just wouldn't boot. will I be able to use the RUU exe while in fastboot?
XcsaS said:
Hello, I am unable to get into recovery or in my rom. I can getting into the bootloader, but cannot get into recovery. I am on 1.50 HBOOT and phone is unlocked. I would like to get back to stock so I can do an OTA update. Any help would be great, please let me know if you need more information.
Click to expand...
Click to collapse
if you have a copy of your boot.img and/or your recovery.img file flash that through your fastboot usb screen and reboot you should be ok pending your /system and /data partitioms are ok... if not follow the rest....
ok im goignt to guess youre new to flashing and the android development... but first thing is first... download the stock recovery zip on the other listed thread and rename it PG86IMG.zip... then reboot into your hboot/bootloader.... this will install a stock rom and recovery AFTER that you must reboot then shut down and reboot into your hboot again and from there go to fastboot and plug in the usb cable so your prompt says fastboot usb and then relock your boot loaderafter that finishes reboot again to the ROM and then run your updates... after you get the updates you want you can unlock again and then reinstall superuser and proceed as you want....
wloftus said:
if you have a copy of your boot.img and/or your recovery.img file flash that through your fastboot usb screen and reboot you should be ok pending your /system and /data partitioms are ok... if not follow the rest....
ok im goignt to guess youre new to flashing and the android development... but first thing is first... download the stock recovery zip on the other listed thread and rename it PG86IMG.zip... then reboot into your hboot/bootloader.... this will install a stock rom and recovery AFTER that you must reboot then shut down and reboot into your hboot again and from there go to fastboot and plug in the usb cable so your prompt says fastboot usb and then relock your boot loaderafter that finishes reboot again to the ROM and then run your updates... after you get the updates you want you can unlock again and then reinstall superuser and proceed as you want....
Click to expand...
Click to collapse
Ok following your instructions I downloaded the RUU (two of them infact) changed the name to PG86IMG.zip, when booting into the bootloader, it starts checking the PG86IMG.zip file, there is a blue status bar on the top right, when it fills completely in, it just starting checking the SD card for files again, and then goes back to the normal bootloader screen with options to select fastboot, factory reset, etc... Is there something I missed? I believe there should be some more options.
EDIT: the football post http://forum.xda-developers.com/showthread.php?t=1334473 only goes to .exe files, I had downloaded a .zip file from a different source with the same name, Should I have changed the .exe to PG86IMG.zip?
After using the command flashboot oem lock
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 66977136 (0x3FDFD70)
FAILED (status read failed (Too many links))
finished. total time: 0.937s
Now showing
*** RELOCKED ***
*** Security Warning ***
XcsaS said:
Ok following your instructions I downloaded the RUU (two of them infact) changed the name to PG86IMG.zip, when booting into the bootloader, it starts checking the PG86IMG.zip file, there is a blue status bar on the top right, when it fills completely in, it just starting checking the SD card for files again, and then goes back to the normal bootloader screen with options to select fastboot, factory reset, etc... Is there something I missed? I believe there should be some more options.
EDIT: the football post http://forum.xda-developers.com/showthread.php?t=1334473 only goes to .exe files, I had downloaded a .zip file from a different source with the same name, Should I have changed the .exe to PG86IMG.zip?
Click to expand...
Click to collapse
no...do not install the exe file at all.... the zip file if it is a trusted source should work...after it loads the files it finishes booting into the hboot screen...from there you can boot into the rom to verify that there is no superuser program and then power down and boot into your hboot again and relock your bootloader then reboot to the rom and update....when you boot back into the rom after installing the zip file it should look like the way it was when you first got it...if not you may have the wrong zip file
Ok I found out there was a zip on that page, I will download that and see where I get. Thank you so much for the help so far.
Ok issue is solved. I guess I needed to be relocked before I could update with PG86IMG.zip. So I guess in the future make sure you are not rooted when trying to update
I was on 4.0.3 and I flashed the zip through AromRa recovery.
Now, when booting up, its stuck at the 4G screen.
The update was the OTA update released to update radios to Global. THIS
It didn't gave any error at all, it said "Reboot to complete installation or update". But when I clicked the reboot option, I saw a line saying something like "Can't write....." then the screen went off and it rebooted. This line was not there, or atleast not visible before I clicked the reboot option.
I am new to rezound and android, so please let me know what I can do. I wasn't able to get a nandroid backup before doing this, had no ext. SD card.
All I did before flashing the zip was flashing the custom recovery. Nothing else. No SU or anything else.
Can I RUU 4.0.3 to fix this problem?
Yes you need to ruu to get it back. I'm assuming your s on. You need to be s off in order to flash radios by themselves.
Sent from my ADR6425LVW using xda app-developers app
Yes, I am s-on and not rooted.
Is there any specific RUU that I should go to? I was thinking of using 4.03.605.2
Thanks
lamborg said:
Yes, I am s-on and not rooted.
Is there any specific RUU that I should go to? I was thinking of using 4.03.605.2
Thanks
Click to expand...
Click to collapse
Yes, that's the latest global RUU.
You need to relock to run it:
fastboot oem lock
Put it on your sd card and it should do it's thing when you reboot. Run it a couple times and make sure it's finished so it will get all the system files. I believe it reboots you once it's done.
Then you can unlock again, flash recovery and root. If you have trouble rooting again search this forum for "super su" and you'll find a version you can flash to gain root.
feralicious said:
Yes, that's the latest global RUU.
You need to relock to run it:
fastboot oem lock
Put it on your sd card and it should do it's thing when you reboot. Run it a couple times and make sure it's finished so it will get all the system files. I believe it reboots you once it's done.
Then you can unlock again, flash recovery and root. If you have trouble rooting again search this forum for "super su" and you'll find a version you can flash to gain root.
Click to expand...
Click to collapse
I relocked but then tried flashing the zip twice.
Here's what comes in cmd:
sending....
OKAY
writing
<bootloader>adopting sig ....
<bootloader>checking sig
failed <remote: not allowed>
finished
After rebooting, it gets stuck on the white HTC screen.
sounds like a bad download, go back to android police and try to get the mirror from Illinois, it worked for me a couple of weeks ago after having the same issue as you.
sent from my rooted SAMSUNG GALAXY NOTE 2...
mike7728 said:
sounds like a bad download, go back to android police and try to get the mirror from Illinois, it worked for me a couple of weeks ago after having the same issue as you.
sent from my rooted SAMSUNG GALAXY NOTE 2...
Click to expand...
Click to collapse
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
lamborg said:
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
Click to expand...
Click to collapse
You have to fastboot oem rebootRUU first
then fastboot flash zip PH98IMG.zip
you may have to flash the zip twice.
Code:
androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
(I can't link yet)
lamborg said:
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
Click to expand...
Click to collapse
You don't flash this in fastboot since it's a zip file.
EDIT: Looks like you can flash in fastboot as mentioned in the above post. Cool, I like that. I would flash it twice as I've read several times that you need to to make sure it gets all the system files.
If htat doesn't work for whatever reason, just put it on the sd card of your phone, detach your phone from your pc and reboot. hboot should find it (it looks for the PH98IMG.zip file) and flash it. Flash it twice to be sure it gets all the system files.
When it's done and you're rebooted use a file explorer and delete the PH98IMG file so it doesn't flash again on the next reboot.
My DNA is moonshined S-off, CWM, and WAS running like a champ. I've probably put 15 different ROMs on this, and I've never had a problem. I searched and couldn't find anything quite like the problem I'm having. In short, I flashed a new rom yesterday (NuSense 4.4.2) and now I can't get past the white HTC screen or the hboot/fastboot screen. If I select "recovery", CWM flashes on the screen for a few seconds then the phone reboots (to the HTC screen). USB'ing to my PC yields little, it installs all the drivers (except the MTP driver), but never shows up in device manager. I'm pretty much lost at this point. Did I kill it?
greatmoose said:
My DNA is moonshined S-off, CWM, and WAS running like a champ. I've probably put 15 different ROMs on this, and I've never had a problem. I searched and couldn't find anything quite like the problem I'm having. In short, I flashed a new rom yesterday (NuSense 4.4.2) and now I can't get past the white HTC screen or the hboot/fastboot screen. If I select "recovery", CWM flashes on the screen for a few seconds then the phone reboots (to the HTC screen). USB'ing to my PC yields little, it installs all the drivers (except the MTP driver), but never shows up in device manager. I'm pretty much lost at this point. Did I kill it?
Click to expand...
Click to collapse
No you don't, you need ROM Firmware Required: Latest hboot, firmware and radio,
Recovery:
USE TWRP .6 Beta
finanandroid said:
No you don't, you need ROM Firmware Required: Latest hboot, firmware and radio,
Recovery:
USE TWRP .6 Beta
Click to expand...
Click to collapse
OK, how do I get all that on the device if I can't get to anything (recovery, storage, etc...)?
greatmoose said:
OK, how do I get all that on the device if I can't get to anything (recovery, storage, etc...)?
Click to expand...
Click to collapse
First if you can access the bootloader /fastboot from there you can flash anything with ADB working updated.
Second: is good that you give more specific state of your phone so any kind guy from xda(beside me) can help you wisely
Ex; Did you took the VZW OTA 4.2.2 or are you GSM user?, access your bootloader and reply what you see there
S-off we know but are you lock or unlocked, hboot 1.33 xxxx ,Radio 1.308 xxx, or what OK
Look likely you have a old Hboot problem with the wrong Recovery as well non- compatible with Nunsense 4.4.2
http://forum.xda-developers.com/showthread.php?t=2629211
please read requirement to flash this Rom. here you can download the twrp beta and superuser to keep root.
here useful information http://forum.xda-developers.com/showthread.php?t=2612740
Latest radio 1.01.01.1112 Latest Hboot 1.54.0000 (3.06.605.4 OTA hboot )
I got TWRP installed (I think), but when I try to access it, it just flashes, then reboots.
finanandroid said:
First if you can access the bootloader /fastboot from there you can flash anything with ADB working updated.
Second: is good that you give more specific state of your phone so any kind guy from xda(beside me) can help you wisely
Ex; Did you took the VZW OTA 4.2.2 or are you GSM user?, access your bootloader and reply what you see there
S-off we know but are you lock or unlocked, hboot 1.33 xxxx ,Radio 1.308 xxx, or what OK
Look likely you have a old Hboot problem with the wrong Recovery as well non- compatible with Nunsense 4.4.2
http://forum.xda-developers.com/showthread.php?t=2629211
please read requirement to flash this Rom. here you can download the twrp beta and superuser to keep root.
here useful information http://forum.xda-developers.com/showthread.php?t=2612740
Latest radio 1.01.01.1112 Latest Hboot 1.54.0000 (3.06.605.4 OTA hboot )
Click to expand...
Click to collapse
I believe that's exactly what happened. I had CWM installed instead of TWRP, then flashed NuSense. I was coming from CM11, radio 1.01.01.1112, hboot 1.33.4444. Not sure if it's locked or unlocked (how do I check?)
greatmoose said:
I got TWRP installed (I think), but when I try to access it, it just flashes, then reboots.
Click to expand...
Click to collapse
do you have a back up or any other Rom in your phone, so you can restore or flash other rom
and start from the scratch, also you didn't check what hboot/radio you have. turn off your phone
then hold together power and volume rocker down. to access the bootloader.
my Break is up, (working) back to you later on, but the more info you give is a + so other member may can help you
for now if not, Ill be back with you later.
finanandroid said:
do you have a back up or any other Rom in your phone, so you can restore or flash other rom
and start from the scratch, also you didn't check what hboot/radio you have. turn off your phone
then hold together power and volume rocker down. to access the bootloader.
my Break is up, (working) back to you later on, but the more info you give is a + so other member may can help you
for now if not, Ill be back with you later.
Click to expand...
Click to collapse
radio 1.01.01.1112
hboot 1.33.4444
There should be a couple of ROMs in my storage, but I can't access them. I can access the bootloader screen (fastboot usb, bootloader, reboot, reboot bootloader, power down) but I can't get to the roms.
greatmoose said:
I believe that's exactly what happened. I had CWM installed instead of TWRP, then flashed NuSense. I was coming from CM11, radio 1.01.01.1112, hboot 1.33.4444. Not sure if it's locked or unlocked (how do I check?)
Click to expand...
Click to collapse
If you used Moonshine to root before you are unlocked. you need to update u HBoot to 1.54.0000 version
or flash this Rom with those radios and current hboot http://forum.xda-developers.com/showthread.php?t=2626050 this is android 4.4.2/ sense 5.5 Stable*
read Second post I did with those radios
---------- Post added at 12:16 PM ---------- Previous post was at 12:09 PM ----------
greatmoose said:
radio 1.01.01.1112
hboot 1.33.4444
There should be a couple of ROMs in my storage, but I can't access them. I can access the bootloader screen (fastboot usb, bootloader, reboot, reboot bootloader, power down) but I can't get to the roms.
Click to expand...
Click to collapse
may you can push the Rom
Download your rom and put it into your fasboot directory* on your PC
Boot into recovery and choose "install" then "install zip from sideload"
It should say to now type into command promt "adb sideload romfilename.zip"
It then loads it, and you just hit flash after it loads.
adb push rom_name.zip /sdcard/0
finanandroid said:
If you used Moonshine to root before you are unlocked. you need to update u HBoot to 1.54.0000 version
or flash this Rom with those radios and current hboot http://forum.xda-developers.com/showthread.php?t=2626050 this is android 4.4.2/ sense 5.5 Stable*
read Second post I did with those radios
---------- Post added at 12:16 PM ---------- Previous post was at 12:09 PM ----------
may you can push the Rom
Download your rom and put it into your fasboot directory* on your PC
Boot into recovery and choose "install" then "install zip from sideload"
It should say to now type into command promt "adb sideload romfilename.zip"
It then loads it, and you just hit flash after it loads.
adb push rom_name.zip /sdcard/0
Click to expand...
Click to collapse
Problem is, i have no way to flash anything.
Flash TWRP first
To flash the Recovery:
Place the file in your fastboot/adb directory on your computer.
Put the device in fastboot mode:
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
The image is easily installed via an unlocked bootloader with the following command:
Code:
fastboot flash recovery imagename.img
For example, I provided a recovery img named twrp.img
So you would type:
fastboot flash recovery twrp.img
---------- Post added at 12:32 PM ---------- Previous post was at 12:27 PM ----------
greatmoose said:
Problem is, i have no way to flash anything.
Click to expand...
Click to collapse
you have to connect the phone via usb, first boot in to bootloader/ fastboot
then connect the phone/ select fastboot usb
finanandroid said:
Flash TWRP first
To flash the Recovery:
Place the file in your fastboot/adb directory on your computer.
Put the device in fastboot mode:
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
The image is easily installed via an unlocked bootloader with the following command:
Code:
fastboot flash recovery imagename.img
For example, I provided a recovery img named twrp.img
So you would type:
fastboot flash recovery twrp.img
---------- Post added at 12:32 PM ---------- Previous post was at 12:27 PM ----------
you have to connect the phone via usb, first boot in to bootloader/ fastboot
then connect the phone/ select fastboot usb
Click to expand...
Click to collapse
Tried that, says twrp installed successfully, but when I try to enter recovery, twrp flashes then the phone reboots.
greatmoose said:
Tried that, says twrp installed successfully, but when I try to enter recovery, twrp flashes then the phone reboots.
Click to expand...
Click to collapse
Flash Hboot 1.54.0000 (3.06.605.4 OTA hboot) then you can RUU
Download new hboot and put in the pc adb folder
1.54.000 hboot.zip
Rename to: PL83IMG.zip
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
fastboot reboot-bootloader
finanandroid said:
Flash Hboot 1.54.0000 (3.06.605.4 OTA hboot) then you can RUU
Download new hboot and put in the pc adb folder
1.54.000 hboot.zip
Rename to: PL83IMG.zip
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
Awesome. Where can i get them?
soul ichnolud
finanandroid said:
Flash Hboot 1.54.0000 (3.06.605.4 OTA hboot) then you can RUU
Download new hboot and put in the pc adb folder
1.54.000 hboot.zip
Rename to: PL83IMG.zip
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
Nevermind, found them. I'll let you know what happens. Thanks for all your help!
OK, the hboot update installed (1.33.0001), now it says ****TAMPERED**** ****UNLOCKED****.
OK, I can get into TWRP now (Yay!), but I have nothing to flash. THe device won't show up in windows, so adb doesn't work, How can I send a ROM to the phone without adb?
greatmoose said:
OK, I can get into TWRP now (Yay!), but I have nothing to flash. THe device won't show up in windows, so adb doesn't work, How can I send a ROM to the phone without adb?
Click to expand...
Click to collapse
OK, first you flashed other hboot no the one I instructed to , but its ok man let try this: get into TWRP tap advanced then File Manager scroll
down look for Data>media...if you had any Rom should be there look in legacy or 0 then move that rom to sdcard so twrp see it and you can flash it. got it
Can you tap Install in twrp and browse to sd card?
IT'S ALIVE!!!! All my thanks! You're awesome!
greatmoose said:
IT'S ALIVE!!!! All my thanks! You're awesome!
Click to expand...
Click to collapse
you're welcome! Glad you got it man! :victory:
Hello, I have a Sprint HTC One M9. I just have unlocked it with help from @stifilz (Thank you!)
He has asked me to Downgrade to 5.0 with Bad Boyz V1.1 Since the phone is S-ON and had version 5.1
Everything was fine, I Downgraded the version to 5.0 and he Unlocked successfully my phone. However I experienced an issue. it started powering off by itself everytime when the phone goes standby. He told me.. it's because that I have a 5.1 kernel on 5.0.2 rom that's the reason.
Indeed, when I installed the latest version of Bad Boyz which is 2.6.651.11 ( 5.1 ) the issue gone. However, I experienced another issue: it keeps telling me an error after the boot finishes: "Unfortunately, the process com.google.process.gapps has stopped"
I click OK, but it keeps showing all the time
Now, I want to restore it to stock image of 5.0.2 then update it officially to 5.1
He told me to Install this : https://www.androidfilehost.com/?fid=95916177934554226
He also told me that there are many ways should help including to restore the system.img (4Gb+) But, he is not sure about it.
So, I thought to ask you guys ??
Thanks in advance.
AminhoVic said:
Hello, I have a Sprint HTC One M9. I just have unlocked it with help from @stifilz (Thank you!)
He has asked me to Downgrade to 5.0 with Bad Boyz V1.1 Since the phone is S-ON and had version 5.1
Everything was fine, I Downgraded the version to 5.0 and he Unlocked successfully my phone. However I experienced an issue. it started powering off by itself everytime when the phone goes standby. He told me.. it's because that I have a 5.1 kernel on 5.0.2 rom that's the reason.
Indeed, when I installed the latest version of Bad Boyz which is 2.6.651.11 ( 5.1 ) the issue gone. However, I experienced another issue: it keeps telling me an error after the boot finishes: "Unfortunately, the process com.google.process.gapps has stopped"
I click OK, but it keeps showing all the time
Now, I want to restore it to stock image of 5.0.2 then update it officially to 5.1
He told me to Install this : https://www.androidfilehost.com/?fid=95916177934554226
He also told me that there are many ways should help including to restore the system.img (4Gb+) But, he is not sure about it.
So, I thought to ask you guys ??
Thanks in advance.
Click to expand...
Click to collapse
you don't want to restore that system.img....here's the issue...you are S-ON (which limits what u can do), and you are running 5.1 firmware
firmware is different than ROM (OS)...you want your firmware & ROM to match
your best route is to get S-OFF, if u don't want to pay the $25, then you need to flash a 5.1 ROM, you can flash the stock rooted 5.1 ROM I posted from http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
your other option is the flash the 5.1 RUU, which will wipe out everything & get u back to stock, not sure if that will affect your sim unlock...since u are s-on, you can ONLY flash the 5.1 RUU, u cannot flash the 5.0.2 RUU & update to 5.1 via OTA
again, get s-off & you'll have more flexibility, plus no issues w/ custom ROMs
OMJ said:
you don't want to restore that system.img....here's the issue...you are S-ON (which limits what u can do), and you are running 5.1 firmware
firmware is different than ROM (OS)...you want your firmware & ROM to match
your best route is to get S-OFF, if u don't want to pay the $25, then you need to flash a 5.1 ROM, you can flash the stock rooted 5.1 ROM I posted from http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
your other option is the flash the 5.1 RUU, which will wipe out everything & get u back to stock, not sure if that will affect your sim unlock...since u are s-on, you can ONLY flash the 5.1 RUU, u cannot flash the 5.0.2 RUU & update to 5.1 via OTA
again, get s-off & you'll have more flexibility, plus no issues w/ custom ROMs
Click to expand...
Click to collapse
Thanks for clearing that up @OMJ . I wasn't quite sure what to do for S-On. I am always S-Off . So not sure what the best route for S-On was.
Thanks again for your expertise
Stifilz
stifilz said:
Thanks for clearing that up @OMJ . I wasn't quite sure what to do for S-On. I am always S-Off . So not sure what the best route for S-On was.
Thanks again for your expertise
Stifilz
Click to expand...
Click to collapse
yes, S-off is the only way to be if you want to play it is well worth the $25
OMJ said:
yes, S-off is the only way to be if you want to play it is well worth the $25
Click to expand...
Click to collapse
Agreed. I always allow the extra $25 when buying a HTC
OMJ said:
your best route is to get S-OFF, if u don't want to pay the $25, then you need to flash a 5.1 ROM, you can flash the stock rooted 5.1 ROM I posted from http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
Click to expand...
Click to collapse
Hi, Thank you for your help sir so far.
I tried to flash with the stockrooted 5.1 ROM but the it stuck on the HTC welcome screen, here is what I have done:
1. Downloaded the stock rooted 5.1 ROM, Transfer it to the Internal storage via PC
2 Restarted the phone and pressed the power button and Vol down key
3 Boot to Bootloader Select TWRP
4 Install then I chosed the stock rooted 5.1 ROM ZIP file
5 Installation successful then reboot
6 It stuck on the HTC One start screen.
PS: I have done a backup prior flashing.
OMJ said:
your other option is the flash the 5.1 RUU, which will wipe out everything & get u back to stock, not sure if that will affect your sim unlock...since u are s-on, you can ONLY flash the 5.1 RUU, u cannot flash the 5.0.2 RUU & update to 5.1 via OTA
Click to expand...
Click to collapse
How can I flash the 5.1 RUU ?
AminhoVic said:
How can I flash the 5.1 RUU ?
Click to expand...
Click to collapse
For flashing the RUU.zip use the instructions here http://forum.xda-developers.com/showthread.php?t=3166761.
I.e
Code:
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip 0PJAIMG.zip
fastboot reboot [I](when finished)[/I]
Obviously change the name of the zip to 0PJAIMG.zip
But use a 5.1 zip here https://mega.nz/#!EUl3jZ7I!Kv0rqBuDswOKHEtMUNidoHvqnWvqmJAdKdA5n3_ytmw
AminhoVic said:
Hi, Thank you for your help sir so far.
I tried to flash with the stockrooted 5.1 ROM but the it stuck on the HTC welcome screen, here is what I have done:
1. Downloaded the stock rooted 5.1 ROM, Transfer it to the Internal storage via PC
2 Restarted the phone and pressed the power button and Vol down key
3 Boot to Bootloader Select TWRP
4 Install then I chosed the stock rooted 5.1 ROM ZIP file
5 Installation successful then reboot
6 It stuck on the HTC One start screen.
PS: I have done a backup prior flashing.
How can I flash the 5.1 RUU ?
Click to expand...
Click to collapse
your issues must be related to being S-ON
for 5.1 RUU, you can use the 0PJAIMG method as stifilz mentioned....personally I think it;s easier to download the official RUU exe from HTC connect phone to pc & run the exe
OMJ said:
personally I think it;s easier to download the official RUU exe from HTC connect phone to pc & run the exe
Click to expand...
Click to collapse
Excellent point here also. The reason I suggested the zip method is that it won't wipe (well didn't for me) the Sim unlock status. Whereas, others have lost their Sim Unlock from RUU.exe.
Also I haven't managed to get a RUU.exe to work since my M7. Lol. Many PCs and windows versions with no luck.
S-off would still be the best way and is well worth the coin
OMJ said:
for 5.1 RUU, you can use the 0PJAIMG method as stifilz mentioned....personally I think it;s easier to download the official RUU exe from HTC connect phone to pc & run the exe
Click to expand...
Click to collapse
Hello,
Should I use the method Stifilz mentioned since he stated that it may wipe the SIM unlock status.
Or to download the official RUU exe from HTC as you suggestted ?
The other option to switch to S-OFF... I couldn't pay with my PayPal because it's locked temporarely. I talked to the SunShine's Team they said there's no alternative method to pay via Credit card outside PayPal. I tried to pay on PayPal as a guest with my credit card but it says that I have to log in becase the credit card is attached to a PayPal account.
Therefore, I will try with the other available options. Since, I only need a working phone with the latest software version installed in.
stifilz said:
Excellent point here also. The reason I suggested the zip method is that it won't wipe (well didn't for me) the Sim unlock status. Whereas, others have lost their Sim Unlock from RUU.exe.
Also I haven't managed to get a RUU.exe to work since my M7. Lol. Many PCs and windows versions with no luck.
S-off would still be the best way and is well worth the coin
Click to expand...
Click to collapse
I'll have to download your zip to check it out, but how is it different? did u just modify the android-info.txt, removing eraseonflash?
AminhoVic said:
Hello,
Should I use the method Stifilz mentioned since he stated that it may wipe the SIM unlock status.
Or to download the official RUU exe from HTC as you suggestted ?
The other option to switch to S-OFF... I couldn't pay with my PayPal because it's locked temporarely. I talked to the SunShine's Team they said there's no alternative method to pay via Credit card outside PayPal. I tried to pay on PayPal as a guest with my credit card but it says that I have to log in becase the credit card is attached to a PayPal account.
Therefore, I will try with the other available options. Since, I only need a working phone with the latest software version installed in.
Click to expand...
Click to collapse
just use the method Stifilz mentioned...if the official RUU exe does wipe sim status, then you'll have to start over & go back to 5.0.2, so you'll have to use that method anyways.
OMJ said:
just use the method Stifilz mentioned...if the official RUU exe does wipe sim status, then you'll have to start over & go back to 5.0.2, so you'll have to use that method anyways.
Click to expand...
Click to collapse
OK, I have downloaded the ZIP file Stifilz has provided, I have no idea how I can flash the RUU, and I can't find the instruction he mentioned. Can you please let me know the steps to do these commands?
Code:
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip 0PJAIMG.zip
fastboot reboot (when finished)
AminhoVic said:
OK, I have downloaded the ZIP file Stifilz has provided, I have no idea how I can flash the RUU, and I can't find the instruction he mentioned. Can you please let me know the steps to do these commands?
Code:
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip 0PJAIMG.zip
fastboot reboot (when finished)
Click to expand...
Click to collapse
There are plenty of good thread that explain what ADB / fastboot are and how to use them.http://forum.xda-developers.com/showthread.php?t=2141817
---------- Post added at 06:46 AM ---------- Previous post was at 06:43 AM ----------
OMJ said:
I'll have to download your zip to check it out, but how is it different? did u just modify the android-info.txt, removing eraseonflash?
Click to expand...
Click to collapse
From memory the zip method (via PC anyway) has never erased my phone.
Not sure about the zip SD Card method though.
The zip that I have linked is the standard one I.e no changes.
I need to check and test what exactly removes the unlock status..
There are many mixes results :?
AminhoVic said:
OK, I have downloaded the ZIP file Stifilz has provided, I have no idea how I can flash the RUU, and I can't find the instruction he mentioned. Can you please let me know the steps to do these commands?
Code:
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip 0PJAIMG.zip
fastboot reboot (when finished)
Click to expand...
Click to collapse
-download this zip...https://www.dropbox.com/s/zo9og024fotjhja/sdktools5.1.7z?dl=0
-create a folder on c:\ name sdktools
-extract the zip into that new folder
-open a cmd prompt in that folder (hold shift, right click folder, choose "open cmd window here"
-copy 0PJAIMG.zip into that sdktools folder
-connect phone to pc
then these are the cmds to enter in the cmd window
-adb reboot bootloader (wait for phone to reboot into bootloader mode)
-fastboot oem rebootRUU
-fastboot flash zip 0PJAIMG.zip
-fastboot reboot
an easier way is to just make sure the zip is named 0PJAIMG.zip, copy to root of internal storage, reboot into download mode (maybe its bootloader), and it should automatically scan & prompt u to install.
OMJ said:
-download this zip...https://www.dropbox.com/s/zo9og024fotjhja/sdktools5.1.7z?dl=0
-create a folder on c:\ name sdktools
-extract the zip into that new folder
-open a cmd prompt in that folder (hold shift, right click folder, choose "open cmd window here"
-copy 0PJAIMG.zip into that sdktools folder
-connect phone to pc
then these are the cmds to enter in the cmd window
-adb reboot bootloader (wait for phone to reboot into bootloader mode)
-fastboot oem rebootRUU
-fastboot flash zip 0PJAIMG.zip
-fastboot reboot
an easier way is to just make sure the zip is named 0PJAIMG.zip, copy to root of internal storage, reboot into download mode (maybe its bootloader), and it should automatically scan & prompt u to install.
Click to expand...
Click to collapse
I had done that before you replied, following the Guide stifilz provided which is partly the same as yours. Anyway, I got this error when I run the command
Code:
fastboot flash zip 0PJAIMG.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think the alternative way.. trough Download mode seems to be easy.. I will test and let you know.
I tried the other method but no luck, I copied the 0PJAIMG.zip to the internal storage, booted to Bootloader mode, selected Download mode nothing happened.. it says below the screen in yellow "SD NOT MOUNTED"
AminhoVic said:
I tried the other method but no luck, I copied the 0PJAIMG.zip to the internal storage, booted to Bootloader mode, selected Download mode nothing happened.. it says below the screen in yellow "SD NOT MOUNTED"
Click to expand...
Click to collapse
I thought it had to be on an external SD Card???
Which I believe you do not have
You may need the a different fastboot there are a few different ones out there. Sorry I did no t allow for this....
AminhoVic said:
I tried the other method but no luck, I copied the 0PJAIMG.zip to the internal storage, booted to Bootloader mode, selected Download mode nothing happened.. it says below the screen in yellow "SD NOT MOUNTED"
Click to expand...
Click to collapse
you are not in Bootloader if you see that. It will be a white screen with *** Software status Modified *** at the top.
Also when you are in bootloader it will automatically scan and see the zip. You just have to click Yes to apply update.
stifilz said:
I thought it had to be on an external SD Card???
Which I believe you do not have
You may need the a different fastboot there are a few different ones out there. Sorry I did no t allow for this....
Click to expand...
Click to collapse
Yep, you're right, it is external sd
Sent from my 0PJA2 using XDA Premium 4 mobile app
stifilz said:
I thought it had to be on an external SD Card???
Which I believe you do not have
You may need the a different fastboot there are a few different ones out there. Sorry I did no t allow for this....
Click to expand...
Click to collapse
OMJ said:
Yep, you're right, it is external sd
Click to expand...
Click to collapse
Hello, I have bought a 4Gb SD card and I have put the 0PJAIMG.zip in it... booted on Download mode, and it started flashing but on system.img_04 it failed.