[ROM][Bacon] Smartisan OS V2.1.0.1 for OPO - ONE Android Development

Smartisan OS is a highly refined and customized version of Android from Smartisan Technology. Smartisan OS for the OnePlus One preserves Smartisan’s distinctive interface, intuitive interactions, and numerous thoughtfully designed features.
Smartisan OS Introduction: http://www.smartisan.com/en/t2/#/os
Important Notes
Smartisan OS ROM v2.1.0.1 for OnePlus One has currently only been tested on OnePlus One phones specifically, and it is not recommended that you install this version of the OS on other brands or models of phones.
Be sure to back up your data before installing the OS.
If you run into any problems with the software or system, please post a direct reply in this thread or reach us in our Facebook or Twitter. For questions about hardware or warranties, please consult the customer service or tech support departments of your phone’s manufacturer.
Installing a new OS on a phone carries some risk, and should be done with caution. Downloading “Smartisan OS ROM” and installing it means that you are fully aware of these risks. Smartisan is not responsible for any problems that might result.
Changelog
Added: Ability to wake the phone with a double tap.
Removed: Voice Search, Smartisan App Store, Game Center, Smartisan Forum.
Removed: Smartisan device insurance purchase page in 1st boot-up walkthrough; Find My Phone via SMS.
Optimized: Adjustment to some ringtones, wallpapers, and typography.
Optimized: The default language is changed to English.
Fixed: Repaired a problem with Google Services disappearing upon upgrade.
Fixed: Repaired a problem with being unable to uninstall Google Settings after a factory reset.
Related Resources
Download: Guide for Installing Smartisan OS ROM on OnePlus One
Download: Smartisan OS ROM v2.1.0.1 for OnePlus One_User Bacon (777.4 MB)
Download: Smartisan OS ROM Recovery for OnePlus One(12.7 MB)
Kernel Source : Smartisan OS is based on standard CM, and you may find the kernel source of this v2.1.0.1 OPO version from this url: https://github.com/CyanogenMod/android_kernel_oneplus_msm8974
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thank for the rom and reserved

Share Screenshots please!

Are you building this ROM or is this a mirror?

Yaznas said:
Share Screenshots please!
Click to expand...
Click to collapse
+1

Yaznas said:
Share Screenshots please!
Click to expand...
Click to collapse
You could check it out here first: http://www.smartisan.com/en/t2/#/os
I will add some screenshots later.

What´s the difference to this Thread?
http://forum.xda-developers.com/oneplus-one/general/rom-smartisanos-1-5-v1-oneplus-t3132614
Are you the Developer or Contributor of this Rom?

Instead of Smartisian Recovery can it be flashed via TWRP recovery ?

srikanth_s said:
Instead of Smartisian Recovery can it be flashed via TWRP recovery ?
Click to expand...
Click to collapse
Yep, please follow the instructions below.
Enter developer options, and make sure root is authorized there.
Delete file system/smartisan_recovery-from-boot.p
Enter fastboot model and flash in new recovery.
Be careful that the GMS Installer and ROM OTA update might not work if you use a 3rd-party recovery.
Good Luck!

xcjchandler said:
Yep, please follow the instructions below.
Enter developer options, and make sure root is authorized there.
Delete file system/smartisan_recovery-from-boot.p
Enter fastboot model and flash in new recovery.
Be careful that the GMS Installer and ROM OTA update might not work if you use a 3rd-party recovery.
Good Luck!
Click to expand...
Click to collapse
On my Bacon I have TWRP and a custom rom.
Can I flash smartisan rom after a full wipe with TWRP recovery?

Tomcar said:
What´s the difference to this Thread?
http://forum.xda-developers.com/oneplus-one/general/rom-smartisanos-1-5-v1-oneplus-t3132614
Are you the Developer or Contributor of this Rom?
Click to expand...
Click to collapse
Contributor, as an employee of Smartisan, and it's a company project, not a personal work.
This build is the official international version. You could easily tell from the changelog that we removed quite a few modules that only work in China, say App Store, Game Center, Chinese Voice Search and etc. You could check the changelog and see all the work we made for international users.
Back to the version from the thread you mentioned, he shared our domestic market version. You will find that there's no Google services, and that the default language is Chinese. Anyway, it's not a good option for international users.
In short, both builds are official and developed by Smartisan, one for China market, the other for international release.

Many thanks.....Can widgets be used on screen if so how??
Rom works 100% no issues so far been using it for 2 days nice to have something different to use.
Bluetooth audio works flawlessly for me on this rom, was having pitch bend audio speed up & slow down on almost ALL other roms 4.4.4 - 5.1.1 - 6.0.1 but not on Smartisan ROM.
Clock screen , lockscreen & calc are nicely designed , tap to wake works perfectly overall very well made & stable rom many thanks.

track909 said:
On my Bacon I have TWRP and a custom rom.
Can I flash smartisan rom after a full wipe with TWRP recovery?
Click to expand...
Click to collapse
Sure!

Welcome to the community. Could you tell what android version it is based on?

UnderworldINC said:
Many thanks.....Can widgets be used on screen if so how??
Rom works 100% no issues so far been using it for 2 days nice to have something different to use.
Bluetooth audio works flawlessly for me on this rom, was having pitch bend audio speed up & slow down on almost ALL other roms 4.4.4 - 5.1.1 - 6.0.1 but not on Smartisan ROM.
Clock screen , lockscreen & calc are nicely designed , tap to wake works perfectly overall very well made & stable rom many thanks.
Click to expand...
Click to collapse
Sorry, no widgets can be used on screen.
May I know which launcher setting you prefer, 9-Grid or 16-Grid? And How you think of those re-designed icons, say Starbucks, IMDb, Youtube, Washington Post and etc? Yes, we re-designed over 2000+ App icons to better match our UI style.

myshakugan said:
Welcome to the community. Could you tell what android version it is based on?
Click to expand...
Click to collapse
the build.prop file within the zip says:
Code:
ro.build.id=LMY48B
So it should be 5.1.1 .
@xcjchandler I would like to try this ROM, especially as I'm currently using your launcher as default with my current MM ROM. Before that, however, I would like to know it it can be installed over and encrypted /data (that I will of course wipe) and /data/media (that I would rather not wipe ).

xcjchandler said:
Contributor, as an employee of Smartisan, and it's a company project, not a personal work.
This build is the official international version. You could easily tell from the changelog that we removed quite a few modules that only work in China, say App Store, Game Center, Chinese Voice Search and etc. You could check the changelog and see all the work we made for international users.
Back to the version from the thread you mentioned, he shared our domestic market version. You will find that there's no Google services, and that the default language is Chinese. Anyway, it's not a good option for international users.
In short, both builds are official and developed by Smartisan, one for China market, the other for international release.
Click to expand...
Click to collapse
actually, 2.6.0 is not an official version it's made in the free time of a Chinese developer (all credits go to him)
Edit: you can install google services if you want to, even in the Chinese version... via Smartisan market
---------- Post added at 18:21 ---------- Previous post was at 18:15 ----------
xcjchandler said:
Sorry, no widgets can be used on screen.
May I know which launcher setting you prefer, 9-Grid or 16-Grid? And How you think of those re-designed icons, say Starbucks, IMDb, Youtube, Washington Post and etc? Yes, we re-designed over 2000+ App icons to better match our UI style.
Click to expand...
Click to collapse
just change launcher to "original"
then you can add widgets. However, I very much prefer the default option/setting

Firmware
Which baseband is included in this ROM?

Happy with TWRP/Multirom. Can't I use these recovery and not the Smartisan recovery to flash the ROM?
Sent from my A0001 using Tapatalk

i used twrp manager to get back to twrp recovery

Related

T.A.R.S. 20s USA version EUI 5.8 for X720

Hi, folks.
Im proud to introduce you my new Custom ROM, T.A.R.S. 20s USA version, adapted for our X720 model.
Official changelog:
GMS Apps
Updated GMS package to 6.0_r10 for increased stability & security
Launcher
Added badge display support for app icons on desktop
Messaging
Eliminated ‘No Subject’ header from MMS
Bluetooth
Decreased Bluetooth discoverability duration to 20sec to save device resources
Camera
Camera image processing algorithm enhancement, like anti-shaking, HDR etc.
App Permissions
Optimized display of app permission requests for the following apps (eliminated unnecessary permissions requests at 1st app launch):
1. Backup Service
2. Bug Services
3. Calendar
4. Clock
5. Contacts
6. Dialer
7. Email & Exchange
8. File Manager
9. Gallery
10. Launcher
11. LeEco Account
12. LeEco Cloud Service
13. Notes
14. Recorder
15. Video Player
General Enhancements & Bug Fixes
I dont want erase all extra application of 20s stock ROM, but all apps I convert them so you can uninstall without any apps, directly from ROM. Are this:
Google Chrome
Google Drive
Hangouts
Google Maps
Google Music
Netflix
Google Photos
Google Talkback
Youtube
I have not root either, because root and NFC pay dont work fine. If you want root, flash SuperSU by TWRP.
And included Pixel Launcher, for those that EUI don´t like, and all Google Pixel Live Wallpapers.
If you have installed T.A.R.S. 19s, you can make a TWRP backup of your current version, install 20s, configure Setup Wizard, and then restore from TWRP of your DATA partition. All yours apps and configuration back again.
BE CAREFUL THAT YOU HAVENT ANY PATTERN OR FINGERPRINT TO UNLOCK YOUR PHONE BEFORE BACKUP BECAUSE WHEN RESTORE DATA DONT RECOGNIZED YOUR PATTERN OR FP AT BOOT.
Download link:
https://www.amazon.es/clouddrive/share/tvCkjAfbvR5TrWtu5I0Zm5r9OloLguJ8Z7SYJmU27qS?ref_=cd_ph_share_link_copy
Enjoy ¡¡¡
Thank you. Does this ROM have the December security patch & dual SIM support and, if yes, can you dirty flash it over the previous TARS 20s ( http://forum.xda-developers.com/le-pro3/how-to/t-r-s-eui-5-9-20s-google-service-t3508869 )?
About ss.?
-Tiz- said:
Thank you. Does this ROM have the December security patch & dual SIM support and, if yes, can you dirty flash it over the previous TARS 20s ( http://forum.xda-developers.com/le-pro3/how-to/t-r-s-eui-5-9-20s-google-service-t3508869 )?
Click to expand...
Click to collapse
I think not, its a different base. Make a backup and try it.
-Tiz- said:
Thank you. Does this ROM have the December security patch & dual SIM support and, if yes, can you dirty flash it over the previous TARS 20s ( http://forum.xda-developers.com/le-pro3/how-to/t-r-s-eui-5-9-20s-google-service-t3508869 )?
Click to expand...
Click to collapse
US version of 20s includes Dec 1 security patch, so I assume this ROM still has it.
Ace42 said:
US version of 20s includes Dec 1 security patch, so I assume this ROM still has it.
Click to expand...
Click to collapse
Yes, include Dec 1 security patch.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For who needs SuperSU
After restoring data in twrp I could not unlock screen as it did not recognise my pattern or fingerprint. Not a big loss though, just Whatsapp messages.
Presterin said:
After restoring data in twrp I could not unlock screen as it did not recognise my pattern or fingerprint. Not a big loss though, just Whatsapp messages.
Click to expand...
Click to collapse
Added this warning to OP, thanks and sorry.
STEVE_MARS said:
Added this warning to OP, thanks and sorry.
Click to expand...
Click to collapse
It's okay, not that big deal. Thank you again for this great ROM.
Hi Steve_Mars, I love your ROM, I love it. ( T.A.R.S. 20s USA version EUI 5.8 para X720 )
WITHOUT ROOT, perfect.
- But, wireless display, does not work. ( With the ROM stock 17s, without the root, it worked well )
- the language french is no fully. ( It's not really important to me )
- On the tacticals buttons, click on the small square button, then back with small triangle button, the return does not work.
Thank you very much for your work
LUYULKMOIO said:
Hi Steve_Mars, I love your ROM, I love it. ( T.A.R.S. 20s USA version EUI 5.8 para X720 )
WITHOUT ROOT, perfect.
- But, wireless display, does not work. ( With the ROM stock 17s, without the root, it worked well )
- the language french is no fully. ( It's not really important to me )
- On the tacticals buttons, click on the small square button, then back with small triangle button, the return does not work.
Thank you very much for your work
Click to expand...
Click to collapse
Youre welcome my friend.
Wireless display its a stock USA Rom bug, dont work 20s either 19s USA version. In LeEco Lemax2 X820 only work with Chinese stock ROMs, Indian dont work.
I dont translate, its on stock ROM
I dont understand about buttons, I havent any problem with them
STEVE_MARS said:
I dont understand about buttons, I havent any problem with them
Click to expand...
Click to collapse
Neither do I, backing up from recent apps works just as it should.
The WhatsApp notifications work well here? with CM13 TS Work fine .. but with no stock 20s
Gynlemon said:
The WhatsApp notifications work well here? with CM17 TS Work fine .. but with no stock 20s
Click to expand...
Click to collapse
All stock roms you must use this in dialer: *#*#46360000#*#* and disable last menu option, and reboot phone.
Then all notifications work fine :good:
@STEVE_MARS
Can you take a look how Cuoco has replaced LIVE button on stock launcher on his EUI? Just noticed it in his Facebook page: https://m.facebook.com/story.php?story_fbid=1851097758467492&id=1557470501163554
Presterin said:
@STEVE_MARS
Can you take a look how Cuoco has replaced LIVE button on stock launcher on his EUI? Just noticed it in his Facebook page: https://m.facebook.com/story.php?story_fbid=1851097758467492&id=1557470501163554
Click to expand...
Click to collapse
Yes, you must decompiled launcher3.apk and change button and all around that button. Im sorry, but I havent enough time.
STEVE_MARS said:
Yes, you must decompiled launcher3.apk and change button and all around that button. Im sorry, but I havent enough time.
Click to expand...
Click to collapse
It's ok, your ROM is still awesome. I kinda like EUI, but hate that little button. Would replacing launcher3.apk with version from Cuoco's ROM work? Why I even asked, I try.
Presterin said:
It's ok, your ROM is still awesome. I kinda like EUI, but hate that little button. Would replacing launcher3.apk with version from Cuoco's ROM work? Why I even asked, I try.
Click to expand...
Click to collapse
I think so, buy every launcher3.apk are different. If you want try it, it´s better that you use another lanucher before and make a backup of original launcher3.apk :good:
Doesn't seem like I can pick up LTE band 12, I'm getting no service in a few places where I used to get LTE connectivity. Anyone else with the same issue? I tried flashing the US modem to no avail. My device is the US model x727.

Honor Note 8 - Google Integration ROM

Having just imported an Honor Note 8, I thought I would create a ROM that met my requirements and share it with the wider community. The aim is to provide a more stock Android experience, removing the restrictions present on Chinese ROMs and replacing Huawei apps and services with those from Google. With this in mind, I went about creating the Google Integration ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
- Replaced the EMUI Launcher with the Google Now launcher
- Updated the integrated Google Services & added the relevant services to sync Google Contacts and Calendar.
- Added in a set of base Google Applications (Contacts, Dialler, Messenger, Gmail, Maps, Calendar etc), replacing built-in Chinese oriented Huawei apps where necessary
- Removed unwanted Chinese & Huawei apps and services
- Removed the overly aggressive Power Genie and Phone Manager to ensure apps are not closed in the background and notifications missed.
The ROM is not rooted - this is by design.
NOTE: It is a requirement to start from the same build that the ROM is based on (B027 for V1, B029 for V2.x and B332 for V3.0). We can revert to a Stock ROM by booting into eRecovery and updating via WiFi.
IMPORTANT: To ensure all notifications are received, install all required apps and then set up the device as per the instructions on my Blog post.
Version 3.1
- Based on B332 with a modified dpi of 440. Please flash the alternative bootloader (link below) if you wish to regain 560dpi.
- If you wish to have a 7 icon tray area, change Settings / Display / View Mode to Normal
- Phone Manager included
- Apps in the CUST partition have been removed except for Backup and the Huawei App store (for Backup updates)
- Google apps updated, further Huawei apps and services pruned.
- Fixed issue where we are presented with multiple options for the Launcher on startup
Please ensure you are on Stock B332 with a compatible TWRP before flashing.
Honor_Note_8_GoogleIntegration_V3-1.zip
Version 3.0
- First release based on Android 7 / EMUI5
- Based on B332
- Stock DPI only, versions with & without Phone Manager available
Please ensure you are on Stock B332 with a compatible TWRP and a mountable data partition before flashing
Honor_Note_8_GoogleIntegration_V3-0 Manager.zip
Honor_Note_8_GoogleIntegration_V3-0 No Manager.zip
If you wish to switch between the default 560dpi and the more compressed 440dpi modes, then I have created two packages that change the scripts in the boot.img to change the dpi.
B332 440dpi Boot Image.zip
B332 560dpi Boot Image.zip
Version 2.2
- Replaced the Huawei Dialler & Contacts with those from Google
- Added Google Music, YouTube & Clock
- Removed Huawei Clock, Video, Music and Gallery (Chinese) & the SIM toolkit
- Removed the Chinese CDROM image which appears when plugging into a desktop
- Released as 440dpi only
Honor_Note_8_GoogleIntegration_V2-2.zip
Version 2.1
- Added Google Photos
- Removed AutoNavi, Stock Firmware Update app, Chinese Speech Service & Hi Board app.
- Created a 440dpi version (modified boot.img) in addition to a stock 560dpi version (Tablet mode with 6 columns of icons)
Honor_Note_8_GoogleIntegration_V2-1.zip
Honor_Note_8_GoogleIntegration_V2-1-440dpi.zip
Version 2.0
- Based around Stock B029
Honor_Note_8_GoogleIntegration_V2.zip
Version 1.0
- Based around Stock B027
Honor_Note_8_GoogleIntegration_V1.zip
Tutorial
I have written up a tutorial on my Blog which explains how I created this ROM and hence how you too could create a Custom ROM for the Note 8 to meet your specific requirements.
Honor Note 8 Custom ROM Tutorial
mwarner said:
Having just imported an Honor Note 8, I thought I would create a ROM that met my requirements and share it with the wider community. The aim is to provide a more stock Android experience, removing the restrictions present on Chinese ROMs and replacing Huawei apps and services with those from Google. With this in mind, I went about creating the Google Integration ROM.
Features:
- Replaced the EMUI Launcher with the Google Now launcher
- Updated the integrated Google Services & added the relevant services to sync Google Contacts and Calendar.
- Added in a set of base Google Applications (Gmail, Maps, Messenger, Calendar, Keep etc), replacing built-in Chinese oriented Huawei apps where necesary
- Removed unwanted Chinese & Huawei apps and services
- Removed the overly aggressive Power Genie and Phone Manager to ensure apps are not closed in the background and notifications missed.
The ROM is not rooted - this is by design.
Version 1.0
- Based around Stock B022
Honor_Note_8_GoogleIntegration_V1.zip
Tutorial
I have written up a tutorial on my Blog which explains how I created this ROM and hence how you too could create a Custom ROM for the Note 8 to meet your specific requirements.
Honor Note 8 Custom ROM Tutorial
Click to expand...
Click to collapse
I would love to try this ROM, but I'm not sure how to root and install TWRP. Done all this on many other phones but this is my first Chinese phone.
Man I really want this ROM!!!!!
Thanks for the ROM but as you mentioned, it is based on B022 which is almost 6 months old.
Already, Nougat Beta is out for HN8, is it possible for you to cook a bloatware-free Rom from it. Will be much appreciated.
PS: And preferably a rooted version.
Edit: Sorry, I did base it on B027 and not on B022, as stated initially! I have edited the first post accordingly.
I have put the Stock ROMs (in UPDATE.APP) format on Androidfilehost here.
Added Version 2.0, based around B029
mwarner said:
Edit: Sorry, I did base it on B027 and not on B022, as stated initially! I have edited the first post accordingly.
I have put the Stock ROMs (in UPDATE.APP) format on Androidfilehost here.
Click to expand...
Click to collapse
How do we install this in UPDATE.APP format?
chrispyutec said:
How do we install this in UPDATE.APP format?
Click to expand...
Click to collapse
The Stock ROMs are in UPDATE.APP format - all Custom ROMs, such as mine, are posted as TWRP flashable Zip files.
You will need to:
1. Unlock the bootloader of your device (either through DC-Unlocker or, if you have had an Honor Id attached to the phone for 14 days then via Honor's website)
2. Install TWRP
3. Flash my firmware
There are a number of tutorials out there that may help you if you are not familiar with the process.
So can I dirty flash this over a stock B029 ROM with root or should I unroot first?
And does Xposed work with this ROM?
Many thanks for this, just downloading v2.0 to try. Sounds very promising
Flavio said:
So can I dirty flash this over a stock B029 ROM with root or should I unroot first?
And does Xposed work with this ROM?
Click to expand...
Click to collapse
I haven't tried either Xposed or dirty flashing - or, indeed, root as yet. I suspect a dirty flash will work, but will retain some of the apps and services I have deleted.
First impressions are very good.
Nice clean interface and so far notifications seem to be working
Only problem I have (sorry) is that I thought v2 was based on B029, I'm on B027 and it wants to update.
If I hit update it reboots and does something in twrp so fast I can't see it and upon reboot is still B027.
No real biggie to me just letting you know.
It's a keeper so much better than standard THANK YOU very much.
I want to try it but ver 2 is 029 or 027?
You have to make it clear this because i have 027 and i dont want to flash 027 again.
It is based on B029. I suspect the firmware version is embedded somewhere within another partition and that is what is being picked up. I only flash System and Boot, both from B029, but there are other partitions too.
Thanks for the heads up - I may have to flash additional partitions to cope with users coming from an older Stock build. If you are already on a B029 firmware then it will say this in Settings.
Sent from my MI MAX using Tapatalk
mwarner said:
I haven't tried either Xposed or dirty flashing - or, indeed, root as yet. I suspect a dirty flash will work, but will retain some of the apps and services I have deleted.
Click to expand...
Click to collapse
Perhaps you can update the first post with the Apps and services you have deleted?
Flavio said:
Perhaps you can update the first post with the Apps and services you have deleted?
Click to expand...
Click to collapse
The entire process is written up in my Blog post, which linked to at the bottom of the first post.
Mike
Sent from my MI MAX using Tapatalk
My mistake, sorry mwarner.
I flashed v2.0 over a B027 install, that is why it wanted to update all the time (I think you guessed that).
I have done it correctly this time V2.0 over B029 and it is not trying to update any more. Sorry for any confusion caused.
All my notifications seem to be working fine, contacts and emails (gmail) all working.
Google voice working fine too.
You have made the phone what it should be for international users.
---------- Post added at 10:24 AM ---------- Previous post was at 10:05 AM ----------
I'm getting the hang of this now, just installed v2.1 all working fine here too
tiggrr1 said:
I flashed v2.0 over a B027 install, that is why it wanted to update all the time (I think you guessed that).
I have done it correctly this time V2.0 over B029 and it is not trying to update any more.
Click to expand...
Click to collapse
Yes, if you want to flash this ROM then you really should be on Official B029 first. I have had a look at unpacking the other partitions, but as B029 is purely an update from B027 it is really quite tricky - various files get patched over existing B027 files, and i'm not sure what would happen if you flash B029 over B029.
Bottom line is, install Stock B029 first.
By the way, if you haven't tried the 440dpi version 2.1, then that is BY FAR my favourite.
Unless I find any big issues with V2.1 ROM, I will leave things as they are until a non-Beta EMUI 5 ROM becomes available and start on V3.0.
Hi, Could you do the same thing like v2.1 with b320 firmware?
mwarner said:
Yes, if you want to flash this ROM then you really should be on Official B029 first. I have had a look at unpacking the other partitions, but as B029 is purely an update from B027 it is really quite tricky - various files get patched over existing B027 files, and i'm not sure what would happen if you flash B029 over B029.
Bottom line is, install Stock B029 first.
By the way, if you haven't tried the 440dpi version 2.1, then that is BY FAR my favourite.
Unless I find any big issues with V2.1 ROM, I will leave things as they are until a non-Beta EMUI 5 ROM becomes available and start on V3.0.
Click to expand...
Click to collapse
Do you mind posting a few pics of 440dpi?
Thanks!
Released V2.2. This is in 440dpi only, as it suits the display size of the device so much better. If there is demand for a 560dpi version I will consider creating one.

[GUIDE]How Install MiFavor 5.0 on A2017U & A2017G

Hi.. First of all i want to say i am not responsible for anything if your device would be broken while doing this steps.
BACK UP YOUR ALL STUFFS
I tried on my device and it is working. So i want to help to A2017U users who wants to MiFavor 5.0. I added screenshots from my devices at the end of topic.
I am not good at English. I hope you can understand what i mean
IT IS WORKING ON A2017G MODEL TOO
AGAIN AND AGAIN. PLEASE READ ALL TOPIC. AND BE SURE YOU ARE RESPONSIBLE FOR EVERYTHING.
0. Back up your all data and your IMEI and current ROM or etc. Your internal or external storage will not be wiped. Just in case.
1. Download files from this topic. [url]https://drive.google.com/file/d/0Bxx5zEkXrECaWXlsZHRpbzlMazQ/view[/URL]
2. Download A2017_B15_Bootstack from here. [url]https://drive.google.com/open?id=0B9-QLXYJGAyWeUFjeWtTWXpFakE[/URL] [File is from djkuz, i just edited it. Actually just deleted 1 file lol].
3. Go TWRP.
4. Install Bootstack.
5. Move ROM folder to TWRP/backup/xxxxxxx folder.
6. Go restore from TWRP menu and select ROM which you downloaded.
7. Install SuperSU to Root it. (OPTIONAL)
8. Reboot.
Installation Video
https://www.youtube.com/watch?v=8eu_XabW1mA
To activate Google Services.
0. Go MiAsistant.
1. Slide to left and go App Manager
2. App Freezing.
3. Cancel Google Play Services.
4. Install [url]https://forum.xda-developers.com/attachment.php?attachmentid=4214487&d=1500300688[/URL]
thanks @gotospeed
You can download GooglePlay Store or other google apps from www.apkmirror.com
if you want to go back U version;
0. Go TWRP
1. Flash B25 Bootstack from DrakenFX.
Thats all.
thanks
@djkuz as i remember his name
@DrakenFX
Please press hit thanks button if I help you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's the performance of this ROM, and how big is the changelog compared to mifavor 4.2?
Any info if it will be released for a2017u/g officially?
ГАСООП said:
What's the performance of this ROM, and how big is the changelog compared to mifavor 4.2?
Any info if it will be released for a2017u/g officially?
Click to expand...
Click to collapse
I don't know when will it be released. I don't use long time, so I can not compare. But design is better so far for me
Hello, thanks for your work, I want to install this Rom but the step 6 is a little confusing, cause I don't know which Rom should install, link of download has a lot of files.
Can you please update this step with names of files to install?
Hebelm16 said:
Hello, thanks for your work, I want to install this Rom but the step 6 is a little confusing, cause I don't know which Rom should install, link of download has a lot of files.
Can you please update this step with names of files to install?
Click to expand...
Click to collapse
Edited link, please download it.
More screenshots please
Laleka said:
More screenshots please
Click to expand...
Click to collapse
added :good:
WesTD said:
added :good:
Click to expand...
Click to collapse
What about the music player? Same or different
I really hope that version 5.0 only comes to Asian phones (if at all and at most) because that's what typically people from there like. But in my opinion, the new style just moves further away from stock Android look and closer to iOS. The skin looks "heavy" and "bloat -ish". The notification toggles UI got worse and the rounded notifications is not useful. It's like a bit more childish theme. Would be nicer if ZTE actually let us and not them customize the notification toggles. They literally removed one of Android Nougat's offered feature here: customized toggles and hidden menu.
this method is working on G model too.
Installed and followed the instructions to the tee. I have the U variant. Phone is not booting into system, recovery or EDL mode. When trying to power on the phone it vibrates and light blinks twice. Same when trying to boot into recovery.
EDIT: I fixed my problem. It just isnt booting after following the steps tho.
crashnova said:
Installed and followed the instructions to the tee. I have the U variant. Phone is not booting into system, recovery or EDL mode. When trying to power on the phone it vibrates and light blinks twice. Same when trying to boot into recovery.
EDIT: I fixed my problem. It just isnt booting after following the steps tho.
Click to expand...
Click to collapse
Yeah, guess we'll have to wait and hope MiFavor 5 officially comes to the U version. After many months of using custom ROMs, I came back to plain stock + root and realized how much I missed it. Stock ROM with Nova Launcher isn't that bad. I mean without Xposed, not THAT much you can do on custom ROMs anyway, with the exception of a few minor tweaks here and there. At least not with what I want.
@WesTD do me a favor, please. Create another backup and include system, data and boot. I'm going to make a flashable zip.
ChiDi9901 said:
I really hope that version 5.0 only comes to Asian phones (if at all and at most) because that's what typically people from there like. But in my opinion, the new style just moves further away from stock Android look and closer to iOS. The skin looks "heavy" and "bloat -ish". The notification toggles UI got worse and the rounded notifications is not useful. It's like a bit more childish theme. Would be nicer if ZTE actually let us and not them customize the notification toggles. They literally removed one of Android Nougat's offered feature here: customized toggles and hidden menu.
Click to expand...
Click to collapse
They have added this feature in 5.0
JackTheBest said:
They have added this feature in 5.0
Click to expand...
Click to collapse
That is good news! In this case I welcome functions over style as long as the style doesn't restrict them.
Gesendet von meinem SGP611 mit Tapatalk
I will add installation video soon.
Installation video.
https://www.youtube.com/watch?v=8eu_XabW1mA
It worked on my 2017U. Instead of installing the Google Play Services linked in the OP, I installed it from apkmirror, along with Google Play Store. Worked perfectly. One thing I would like to add, if you are being prompted for a password upon startup, go to TWRP and perform a factory reset. I was and that's what worked for me.
Does Magisk work on this?
It looks like an update came out
https://4pda.ru/forum/index.php?showtopic=814221&st=1280#entry63361136

Genesys 26s for LePro3 X722 Elite

admin note: leader image removed. plz refrain from reposting
Hi all.
We have a fully functional ROM 26s with no fear of bricks, and no bootloader locks!!
First of all, my ROMs are totally open to anyone who has some knowledge of development, and can use my source are no problem at all. I'm just asking you to mention that I developed this source, but it's not a requirement either, I'm just saying that it seems ethical.
The changelog is next:
Re-compiled kernel to avoid bootloader lockdown
Cleaning of Chinese applications
Replaced the original browser with Chrome
Google Play Store and pre-installed Google Services
Contact and Google calendar synchronization
Google Keyboard
Rooted with Magisk
Busybox pre-installed
Small improvements and tweaks to improve performance
Please note that LeEco and its EUI layer is very sensitive to use Google Services. It only serves a specific version and must be placed when compiling the ROM in a specific directory. Therefore, the first thing to do when you enter Play Store is to "force" it to update the services. I use a trick, and that's installing the Linkedin application, which just when you run it needs the services and updates them
The QR LeEco code reader embeds it inside the browser, not in an external application. Therefore, unless we install an app for it we will not be able to read QR codes.
And finally, I have disabled the phone's security check feature, since there is no specific TWRP. So BEWARE AND MAKE SURE YOUR MOBILE IS AN X722 ELITE BEFORE INSTALLING GENESYS!!.
Installation Method:
I assume you have TWRP installed. I've used TWRP for X720 all the tests:
We enter TWRP by pressing the power button and simultaneously pressing the VOL+, until the RECOVERY screen appears.
We copied the ROM to the root of the phone.
We make wipe, the default one is enough.
We will install ourselves, select the ROM and give you to install.
Some screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link:
Genesys 26s for LePro3 X722 Elite
Enjoy ¡¡¡¡
Steve Mars
P.D.: Translate from spanish by DeepL
Nice to see you here again Steve:good:
Very nice work.... I'm at development to unlock bootloader from a brick phone with several changes inside Qfil files and archives. Keep moving...
CrisBalGreece said:
Nice to see you here again Steve:good:
Very nice work.... I'm at development to unlock bootloader from a brick phone with several changes inside Qfil files and archives. Keep moving...
Click to expand...
Click to collapse
Same here, my friend... old rockers never die
If I can help you, please tell me :good:
Steve your rom having the Greek lang ?
paiktaras said:
Steve your rom having the Greek lang ?
Click to expand...
Click to collapse
No, only languages that stock ROM.
Nice development! Thanks guys!
This is a big step, thanks Steve
Is 26s an improvement over 20s in any discernable way? They both seem to behave similarly. Maybe 26s is better for battery life or heat output.
Thanks for the ROM, btw.
STEVE_MARS, please, could you make an archive for the firmware via the TWRP, which returns the stock browser and the QR scanner. I tried to recover these files from firmware 20S, but the browser closes with an error. I apologize for the bad English, this is not my native language.
STEVE_MARS said:
No, only languages that stock ROM.
Click to expand...
Click to collapse
What languages are supported by rom, is it Polish
nero3222 said:
What languages are supported by rom, is it Polish
Click to expand...
Click to collapse
First of all thank you so so so so much for the effort!!!! You are the best!
Now a Stupid question can someone please write a foolproof tutorial or maybe if someone could make a video of whole the process while trying this? This would help me and so many others so much. Thanks a lot
​
gaatjesprikker said:
First of all thank you so so so so much for the effort!!!! You are the best!
Now a Stupid question can someone please write a foolproof tutorial or maybe if someone could make a video of whole the process while trying this? This would help me and so many others so much. Thanks a lot
Click to expand...
Click to collapse
Youre welcome.
There is a lots of tutorials to install ROMs by TWRP, search it in Google, its very easy .
STEVE_MARS said:
​Youre welcome.
There is a lots of tutorials to install ROMs by TWRP, search it in Google, its very easy .
Click to expand...
Click to collapse
Thanks amigo! Will def try, hope i'll not brick my phone, but if i do this i can still use pay apps and other apps?
My phone still needs to arrive but I guess it will be here soon, maybe by that time some people already managed to install android 7/8 on it.. ( https://forum.xda-developers.com/le...le-pro-3-elite-x722-lineage-os-t3660482/page6 )
Let's see what the future brings but again you did very great work! :good:
No vendor ROM passes SafetyNet natively, and I'm pretty sure this ROM doesn't either, even if you removed Magisk, busybox, etc. and unrooted completely. You may need to pass SafetyNet to use certain payment apps like Android Pay and some banking apps. Even some games check for SafetyNet. Thankfully, you can circumvent SafetyNet by using Magisk, and this ROM comes with it.
You're incredible.
Keep up the great work.
This device needs developers like you @STEVE_MARS
Hi Steve, Thanks for your work. I found only minor things (maybe is my personal flavor) : no network speed indicator in status bar. And also, stock browser have slide gesture for forward and backward which works same as safari on Iphone: it return to same page at same place: if you scroll to the middle of page and move to another you can revert to same place). I didn't find an alternative solution for chrome or firefox.
Thanks,
Andrei
andreicos said:
Hi Steve, Thanks for your work. I found only minor things (maybe is my personal flavor) : no network speed indicator in status bar. And also, stock browser have slide gesture for forward and backward which works same as safari on Iphone: it return to same page at same place: if you scroll to the middle of page and move to another you can revert to same place). I didn't find an alternative solution for chrome or firefox.
Thanks,
Andrei
Click to expand...
Click to collapse
Your welcome
About network speed you must activate it into Phone Manager/Data usage control/Settings (Up right icon)/Display real-time speed.
And about stock browser, too much push notificacion in chinese... I dont like it
how do i install the rom? is twrp needed? if so how do i install twrp recovery on the le pro 3 elite?
InfernusV said:
how do i install the rom? is twrp needed? if so how do i install twrp recovery on the le pro 3 elite?
Click to expand...
Click to collapse
Look

Flyme7.8.7R For the Leeco X720 and X727

(7.1) Flyme7. Fingerprint infrared V3 For the Leeco X720 and X727 ( Updated on 9/5/2018 )
AKA: The newest version of Flyme Original Chinese Name : 7to-X720.flyme7.指纹红外V3.zip
Developer: Cold and Ruthless
Original Link: http://rom.7to.cn/romdetail/1030273
Link: https://mega.nz/#F!xYJgXYxK
Key: !QNUTt-aMXA-Kvl39hOMp9A
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flyme:
LeTV pro3 transplant Flyme7.8.21R V3
Redesigned interface, better overall experience
Advanced settings root card brush package
Optimized sound
Author: Cold ruthless
Release Date: 2018-09-04
Android version: 7.1.x
UI type: Flyme ROM
Size: 1270.00MB
Experience the new interface, with advanced settings, high speed, theming options, and excellent call and sound quality, all are hallmarks of the Meizu Official Experience
Applicable models: LeEco LEX720, LEX727
Optimization of the optimized
volume of the bottom package update sound.
Temperature control based on port from: Charm Blue Note 6 Build
Double Wipe> reboot to Recovery, if you have an error you may need to format storage
The first boot is very slow, please wait for the Meizu official latest experience version transplant
Past Bluetooth issue resolved.
Optimization scheduling
New interface new experience, advanced settings and optimization
Installation Notes:
First Boot may be slow, so if it takes a while for the first system boot, the solution is just to wait longer.
Flyme Account http://forum.flymeos.com/
Create an Official Flyme account if you want to gain access to tons of addons.
Meizu is Port friendly and Flyme Account Provides:
Forum advice
Plugins,
Apps,
3rd party themes etc.
Download Flyme 7 Launcher, Stock Wallpapers, and Apps (Flyme 7 stock APK)
https://www.androidsage.com/2018/05/15/download-flyme-7-launcher-stock-wallpapers-apps-apk/
As always, flash anything under your own discretion
Root
This Rom comes with Magisk root, You can easily flash Magisk 17.1 overtop after setting up the system and then rebooting to recovery.
Gapps: I am using BeansGapps-Mini-7.1.x-20170725.zip
Helpful files:
https://mega.nz/#F!JMYSSCLQ
Key: !xgQFTB69PE-hL8RTUbpUIw
Firmware
https://mega.nz/#F!oAZ3yC4b!
Key: MDwbHXNTRdrpgMvQ42yviw
If you have safetynet issues, follow the steps below
Extract the boot.img file from the rom, and placed the boot image into storage.
Open Magisk and use install to Patch Magisk to the boot.img.
Reboot to recovery, install the patched boot.img to boot
Flash addonsu-15.1-arm-signed.zip, and then reflash Magisk again, from storage then use advanced options to clear cache, and then reboot to system.
With these steps you will always Pass Safetynet and be playstore certified
https://forum.xda-developers.com/showpost.php?p=77367331&postcount=4790
Build Prop Recommendations
After the installation and initial testing period,. you may decide to continuing using Flyme for a while:
If so you can further optimise the ROM with these build prop and edits posted below.
First backup your existing buildprop
* ro.product.locale.language = en ( or your language)
* ro.product.locale.region = IN or your country
* persist.sys.timezone = your country ( see proper entry here: https://gist.github.com/arpit/1035596)
* persist.sys.meizu.region =
or use persist.sys.oem.region= your country google correct acronym for your country
Reserved for future hints
Thanks I will try and feedback
i get error code 3 when i try to flash
rob_z11 said:
i get error code 3 when i try to flash
Click to expand...
Click to collapse
Me Too!
Yes, I tried it and the same thing happened to me, it must be a corrupt download because people are giving the release a 8.3/10. I found a slightly older but highly rated rogue pig version. ( see same link above)
I installed it successfully and must say, it's actually extremely good.
Corruption
The original newer file is probably just corrupted so I am going to try redownloading it. Until then, check out the other version that I placed in the same megadrive folder see the link above. Yes, it's a little older but its actually awesome!
I just attempted to find the newer rom by cold ruthless on the BBS website, has he been banned. I had a bookmark saved and when I click I get this message " Authors are banned or deleted automatically blocked" Not sure if its the same person or not, if this next download is corrupt. I would still recommend flyme_LEX720_rogue_6.8.3.17R-beta, I am testing it right now and like it alot.
Does Android Pay work with this ROM?
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
It looks like what happened to me when going from an Oreo rom to Nougat, you have to format data not only wipe data. Format data, write "yes" and then install the rom. Always have a backup of your data before.
flyme is one of the best system , the official one is good but it's old , be sure to have eui firmware before flashing flyme .
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Please can you put the link of old recovery version
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Did you format internal storage?
3llawi said:
Did you format internal storage?
Click to expand...
Click to collapse
No because I have always been on miui10
can some1 link me the gapps?
collisiion said:
can some1 link me the gapps?
Click to expand...
Click to collapse
Look at the post #1
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
andrew2401 said:
Does Android Pay work with this ROM?
Click to expand...
Click to collapse
I believe so, though I haven't tried it yet. I will let you know late tonight
tsongming said:
I believe so, though I haven't tried it yet. I will let you know late tonight
Click to expand...
Click to collapse
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
tsongming said:
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
Click to expand...
Click to collapse
Ok, this is what I have found. Your original latest flyme seems to be working ok. Here is what I have done. Using RAR apk, I unzipped it, and it complained about one apk in mizu-apk folder, and I ended up removing that folder completely, and zipped the ROM again. It flashed without any issue, but I can't seem to get Data to turn-on. It turns on briefly during the boot, but it goes away. I think if I compare the build.prop from older version with newer version, I may be able to find the fix.
andrew2401 said:
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
Click to expand...
Click to collapse
Extremely good, at the moment my phone has no OS at all..
I only glanced at battery life briefly yesterday with Gsam battery tool. Plus, I installed BlackScreen 5.3 r2 which worked fine, I would rather wait for a real answer. Otherwise it would just be a guess.

Categories

Resources