I bought one of those "hardened glass" screen protectors from ebay, but it doesn't cover the whole screen. There's a about 2-3 mm gap from the protector to the edge of the screen.
Anyone found and successfully applied a screen protector that covers the whole screen? Not necessarily (but preferably) "glass", I just want one that covers the whole screen.
Yes, I have screen glass that lays near the metal edge and have a 0.5 mm gap around 'home' button and speaker. It is a Chinese/noname one and it was mounted on a service center.
have buyd one too,its from www and i have it from a seller in my street,works good,because my phone kissed the floor and only the screenglass from the safer is broken,its real glass for 5 euro and its awesome.
MoshPuiu said:
Yes, I have screen glass that lays near the metal edge and have a 0.5 mm gap around 'home' button and speaker. It is a Chinese/noname one and it was mounted on a service center.
Click to expand...
Click to collapse
Is it similar to the ones on eBay who have a bit of print at the top and at the bottom or is it completely clear?
AmoledIsBetter said:
Is it similar to the ones on eBay who have a bit of print at the top and at the bottom or is it completely clear?
Click to expand...
Click to collapse
It is completely clear.
MoshPuiu said:
Yes, I have screen glass that lays near the metal edge and have a 0.5 mm gap around 'home' button and speaker. It is a Chinese/noname one and it was mounted on a service center.
Click to expand...
Click to collapse
Hi,
Can you share the link where i can get full covered tempered glass for my A7-2016 which stick to the screen properly.
sangalaxyi9003 said:
Hi,
Can you share the link where i can get full covered tempered glass for my A7-2016 which stick to the screen properly.
Click to expand...
Click to collapse
Sorry, as I mentioned, the glass was installed on a service center (but not a samsung service). It seems it was a bulk or smth like that...
MoshPuiu said:
Sorry, as I mentioned, the glass was installed on a service center (but not a samsung service). It seems it was a bulk or smth like that...
Click to expand...
Click to collapse
Ok. Fine. Can you share a PIC of it. Just like to see how it fits your mobile. Also let me know whether you are getting any smudges at the edges
ahmedromel said:
can you please share a photo. really want to buy this too
Click to expand...
Click to collapse
There are some dust from the beach but I hardly ever clean the phone...
don't suppose anyone has found one that fits completely?
I don't know if it's allowed to post links, but after a ery long research, I found this one and it's the best I ever had.
Just search this on ebay: PROTECTOR DE CRISTAL TEMPLADO FRONTAL COMPLETO 3D SAMSUNG GALAXY A5 2016 +FUNDA
Very good full screen protection, nothing bad about it, good price and fast delivery (from Spain to Germany at least ).
has anyone tried the spigen one? I am really tempted to buy it but I was wondering how it actually was
For my A7 2016, I came across a China brand: Nillkin. The tempered glass is called the Amazing H for 0.3mm thickness and Amazing H+ Pro 0.2mm thickness. Manufacturer site stated the glass is 68mm in width (which is the flat surface before it curves on the sides). I just ordered the Amazing H+ Pro considering the other sellers sell tempered glass that are shorter width than what Nillkin offers... might post pictures after obtaining and installing it.
13 June 2017 Edit: A little late editing my post due to Internet issues. Also unable to post images onto the post due to forum restrictions so quoted links to image will have to do.
Installed product. Halo effect on all edges of the screen. Does not affect visibility during phone operation.
i65.tinypic.com/2yun3mh.jpg
Click to expand...
Click to collapse
Close inspection of top section of the screen.
i65.tinypic.com/b67wah.jpg
Click to expand...
Click to collapse
Close inspection of bottom section of the screen.
i66.tinypic.com/2hs5hck.jpg
Click to expand...
Click to collapse
Tempered glass width is approximately 1mm less of the phone's display width. All other screen protectors I've bought make this less to avoid the halo effect. If installed properly - the halo effect does not hinder visual display during phone use.
i64.tinypic.com/2gvseb7.jpg
Click to expand...
Click to collapse
Pros: Nillkin is one of the brands that have their tempered glass width fit almost close to the phone's display area. Includes a plastic screen protector for the back camera lens and back glass panel as part of the package. Also includes an anti-static strip that you apply on the phone screen before finalizing the tempered glass installation to minimize lint/dust accumulation.
Cons: Proper installation can be quite frustrating as there is little margin for error (particularly on the width of the phone screen) so installation needs to be spot on. Edges can accumulate dust/lint if not properly installed/aligned. Is slightly pricey than the many screen protectors sold on the cheap that lacks the width equivalent to the phone's display area.
I'm looking for a tempered glass protector for my A3 2017. The one I bought doesn't cover the whole surface because the glass of the screen is slightly curved close to the edges, a la iPhone. I don't know if such a tempered glass protector exists. Do you know anyone?
Inviato dal mio SM-T805 utilizzando Tapatalk
Search eBay for this item number 172318279555 for the A5
Use this search criteria (copy/paste) for the A3 - "Samsung Galaxy A3 (2017) Tempered Glass Screen Protector FULL 3D Coverage" without the quotation marks.
Related
I bought some screen protectors off eBay and they leave about 2mm of space on both sides of the display.
I'm fine with the screen protector not covering the entire front panel but it should at least cover up the display. Whoever designed this film must be out of their mind.
Anyone know of an eBay seller that has a screen protector that actually covers the entire display?
EDIT: I know there are threads about this but they're all about the glass protectors. I'm looking for the film protectors.
DonDizzurp said:
I bought some screen protectors off eBay and they leave about 2mm of space on both sides of the display.
I'm fine with the screen protector not covering the entire front panel but it should at least cover up the display. Whoever designed this film must be out of their mind.
Anyone know of an eBay seller that has a screen protector that actually covers the entire display?
EDIT: I know there are threads about this but they're all about the glass protectors. I'm looking for the film protectors.
Click to expand...
Click to collapse
Its seems to be the one thing thats hardest to get, I thought the S7 Edge would be the one that would be difficult to get screen protection for given the nature of the screen. I dont know whether its the 2.5D glass on the S7, but any review for screen protectors seem to be bad as there are gaps down the sides. I usually get a glass protector straight away but holding off for now until I decide whether I'm going to bother or not. I had considered one of the film covers but might just go for one of the full screen glass ones like the one below, although I really dont want to take away from the looks of the device.
http://www.ebay.co.uk/itm/252424720452?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true
I bought a tempered glass screen protector off eBay that covers the entire edge but leaving a tiny bit of room for a case to go on without lifting the protector. But the downside is you can see the dot matrix in the sun which isn't a major problem for me. I would rather see a good protector that i paid $10 that had dot matrix then see scratches form over time.
Leeum said:
I bought a tempered glass screen protector off eBay that covers the entire edge but leaving a tiny bit of room for a case to go on without lifting the protector. But the downside is you can see the dot matrix in the sun which isn't a major problem for me. I would rather see a good protector that i paid $10 that had dot matrix then see scratches form over time.
Click to expand...
Click to collapse
Is it the digitizer that you can see when looking at it with bright sunlight?
No. Since the whole protector isn't sticky like the plastic ones usually are. Only the touch screen part of the protector have these little dots that you will see in bright lighting which is to make touch feel normal. Can be quite annoying sometimes but i get over it. Worth the protection to me
Leeum said:
No. Since the whole protector isn't sticky like the plastic ones usually are. Only the touch screen part of the protector have these little dots that you will see in bright lighting which is to make touch feel normal. Can be quite annoying sometimes but i get over it. Worth the protection to me
Click to expand...
Click to collapse
Like in the picture in the post below? As you say its weighing up how much it annoys you vs how much you want to protect your screen.
http://forums.androidcentral.com/t-galaxy-s-iii-accessories/199841-xgear-spectre-tempered-glass-screen-protector.html#post2073212
Yeah thats a pretty good example of "The Dot Matrix Effect" but luckily for me the protector i have isn't anywhere near as bad as that. And definitely not as noticeable. It only annoys me the tiniest amount. But i rarely see it or notice it that much sometimes.
gsmyth said:
http://www.ebay.co.uk/itm/252424720452?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true
Click to expand...
Click to collapse
i can recommend that screen protector, it cover the whole screen if you have a case protector too.
you can see it here:
http://forum.xda-developers.com/galaxy-s7/accessories/forget-ugly-galaxy-s7-case-real-deal-t3386614
Been using a Clear-Coat film screen protector since I got my S7 in March. It's a good product, holds up well and works perfect with my Otterbox Commuter Case. Lifetime warranty. It's not tempered glass.
www.clear-coat.com
opdrago said:
i can recommend that screen protector, it cover the whole screen if you have a case protector too.
you can see it here:
http://forum.xda-developers.com/galaxy-s7/accessories/forget-ugly-galaxy-s7-case-real-deal-t3386614
Click to expand...
Click to collapse
Does it affect touch sensitivity? Is it slippery the same as the screen? Would be nice to have more in-depth review.
http://www.ebay.co.uk/itm/252424720452
DonDizzurp said:
I bought some screen protectors off eBay and they leave about 2mm of space on both sides of the display.
I'm fine with the screen protector not covering the entire front panel but it should at least cover up the display. Whoever designed this film must be out of their mind.
Anyone know of an eBay seller that has a screen protector that actually covers the entire display?
EDIT: I know there are threads about this but they're all about the glass protectors. I'm looking for the film protectors.
Click to expand...
Click to collapse
Here you go..
http://m.ebay.ca/itm/Spigen-Curved-...or-Samsung-Galaxy-S7-/272208665559?nav=SEARCH
Sent from my SM-G930W8 using Tapatalk
jeronski said:
Here you go..
http://m.ebay.ca/itm/Spigen-Curved-...or-Samsung-Galaxy-S7-/272208665559?nav=SEARCH
Sent from my SM-G930W8 using Tapatalk
Click to expand...
Click to collapse
this is not covering the entire display only the middle screen side to side.
jeronski said:
Here you go..
http://m.ebay.ca/itm/Spigen-Curved-...or-Samsung-Galaxy-S7-/272208665559?nav=SEARCH
Sent from my SM-G930W8 using Tapatalk
Click to expand...
Click to collapse
Kinda pricey but it looks good. Do you have this one? Any issues?
opdrago said:
this is not covering the entire display only the middle screen side to side.
Click to expand...
Click to collapse
The middle screen is the display...........
I think you meant it doesn't cover the entire front panel which I'm fine with.
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
I just ordered the matte and the ultra clear screen protectors. I didn't buy the body because I have a Rhinoshield bumper and back protector. I'll post a review once they arrive.
Good product the body shield is
Have been using the Gadgetshielz full body protector for 6 months now. It is quite good and the cuts are precise. Quite a lot of work, applying them is. Be patient after applying, in a week or so, the bubbles and wobbles will sort themselves out. Was hard to believe when I completed installation and saw what a mess it was.
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Using their screen protector, with my rhinoshield bumper case and no bubble. Wanted glass first but all those that I bought, the case lifted them or they had the big halo, lifting all around cause the curve screen.
http://s30.postimg.org/6k9nxdkm9/1.jpg
http://s30.postimg.org/u2bgpk80x/4.jpg
They are working way far better than the TGP.
billubakra said:
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
Click to expand...
Click to collapse
Thanks mate. I bought two and will report when it arrives
So, here's why review-
Finally ordered them. It was my first time that I was installing any sort of protector and I was super nervous. The protector kept coming off. I had to wet it with the solutions many times. I drove out the bubbles as many as I could but the end result was way too foggy and messy. But after 48 hours everything was gone, except few dust and fingerprints particles which are my fault BTW there's a huge particle of dust on the back button. Can I lift it up just a tad to remove it? I still have the solution, I am planning to wet it to reapply. Will it work?
Also can anyone suggest a good cover for S7? My current one is a chinese one, but I think it will remove the side protectors if I take the phone out few times because with the side protectors the sides bulge out a bit. @r3xx3r @ere1nion
Any way to get the same cover in India?
iBolski said:
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Click to expand...
Click to collapse
I searched for a month, ordered like 10 different tempered glasses from various websites but they all sucked. GS's protector is not a glass but it is the best alternative to a glass.
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
billubakra said:
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
Click to expand...
Click to collapse
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
MrDusan said:
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
Click to expand...
Click to collapse
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
billubakra said:
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
Click to expand...
Click to collapse
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
MrDusan said:
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
Click to expand...
Click to collapse
Yes, since there's no curved/rounded tempered glass available so still using them. Go for them Brother.
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
James.Markham0757 said:
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
Click to expand...
Click to collapse
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
An update, I used my phone with the Samsung Gear VR yesterday and when I removed it the protector from the upper side of the phone, where the front camera is got removed I tried to paste the same but it is full of bubbles now . Is anyone else using GS's protector with VR?
billubakra said:
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
Click to expand...
Click to collapse
Correct it is not. I use the Otterbox Commuter and Otterbox Defender so this is not an issue for me particularly. I had a partial screen protector on already so no shift in change for me there either. I just received mine in the mail today. The back application was by far harder than the front. I didn't get it perfect. It's the material used on the back. I will not be testing this screen protector but I feel confident with it on. Hopefully it will never need to prove itself.
So, my protector is screwed thanks to Gear VR, it kept on removing the upper part of the protector every time I put the phone in the Gear VR or took it out. Has anyone tried the so called buff guard(a type of tempered glass) which covers the whole screen even the edges? Is there any alternative for the GadgetShieldz protector?
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you have to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
iBolski said:
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you can to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Thanks for such a detailed review. There are many protector glasses of that sort available in India, all of them are manufactured in china, but not the brand which you have mentioned. The reviews of the chinese one's is pathetic. So, I didn't go for them. Can you please check and confirm whether the phone fits fine in Gear Vr with the protector that you have installed or not?
This one, though its for the Edge model, looks tempting but I will wait for an early bird's review before ordering the one for the non-Edge version which should be available by tomorrow-
http://www.amazon.in/CEDO-Samsung-G...ems&ie=UTF8&qid=1489471980&sr=1-4&keywords=s7
Hi all,
I'm looking for a good glass screen protector that covers the whole screen (usually they are ones with a black or white border), but I'm really struggling to find good makes. I tried a protector from LK, but the glass was pretty cloudy and had a 'rainbow' effect raising our from the centre of the protector, it also turned out to be a disaster to remove, with the strong adhesive leaving adhesive marks and shattered glass as I tried to remove it!
Anyone else had any experience with other protectors and could make a recommendation?
I tried the 2 from Nillkin, but only one had full coverage with black edges. The glass was fine, but the edges looked cheap and tacky.
There is a video of full screen glass on YT and the guy that posted the video has posted videos here (unofficial Huawei), but he's just a shill and has no interest in answering questions, just promoting products.
https://www.youtube.com/watch?v=BxZzXd_JG4M
I use Mofis tempered glass (full coverage). It's working like a charm.
Skickat från min VTR-L29 via Tapatalk
c411umuk said:
I tried the 2 from Nillkin, but only one had full coverage with black edges. The glass was fine, but the edges looked cheap and tacky.
There is a video of full screen glass on YT and the guy that posted the video has posted videos here (unofficial Huawei), but he's just a shill and has no interest in answering questions, just promoting products.
https://www.youtube.com/watch?v=BxZzXd_JG4M
Click to expand...
Click to collapse
He called Jozinek in this forum.
---------- Post added at 11:35 AM ---------- Previous post was at 11:27 AM ----------
A friend of mine got this brand, he got it from china, it's called called smartdevil, although it's only a OEM brand, anyway, it includes a frame for accurate placement of the protector, full coverage glass protector with about 1/2mm rim to accommodate a case, liquid filler to fill up the sids rim.
no link will be provided unless you intend to flight to china to buy it, just to let you know they are available so may be some searching you can find it online or similar item since it's only a oem product.
I also had a horrible experience with the LK screen protector. Rainbow effect in the middle and really annoying adhesive at the top and bottom. The transparent screen itself was also not very clear.
I then switched to an OMOTON brand one and it is amazing! Fingerprint and smudge resistant. Fits perfectly, full coverage across the screen. Looks sturdy. Cutouts perfect. Only downside is that it ends a bit short at the top and bottom, so still exposed there unless you use a case with a lip.
Avoid LK, and give the OMOTON one a try.
DeedsOfTheDead said:
I use Mofis tempered glass (full coverage). It's working like a charm.
Skickat från min VTR-L29 via Tapatalk
Click to expand...
Click to collapse
Do you have a link to where I can find them? Tried Amazon UK and Googling, bit couldn't find anything.
boonkoh said:
I also had a horrible experience with the LK screen protector. Rainbow effect in the middle and really annoying adhesive at the top and bottom. The transparent screen itself was also not very clear.
I then switched to an OMOTON brand one and it is amazing! Fingerprint and smudge resistant. Fits perfectly, full coverage across the screen. Looks sturdy. Cutouts perfect. Only downside is that it ends a bit short at the top and bottom, so still exposed there unless you use a case with a lip.
Avoid LK, and give the OMOTON one a try.
Click to expand...
Click to collapse
Glad I'm not the only one with a bad experience with LK. Looks like the transparent Omoton protectors that don't cover the full screen are easy enough to find, but I'm struggling to find the full coverage one where did you get yours from?
https://m.aliexpress.com/item/32803815777.html#autostay
@Ally153
Skickat från min VTR-L29 via Tapatalk
Glad I'm not the only one with a bad experience with LK. Looks like the transparent Omoton protectors that don't cover the full screen are easy enough to find, but I'm struggling to find the full coverage one where did you get yours from?
Click to expand...
Click to collapse
I got my OMOTON screen protector from Amazon (prime delivery - fulfilled by Amazon). You're right, it isn't full coverage (smaller than LK's one). But its close enough to full coverage if you have a tpu case that has a good lip.
Yesterday I got my Omoton tempered glass (Amazon.co.uk), and I am dissatisfied - the glass does not fit properly on the display (air space on both sides)...
This is Nillkin's. Similar size* but adheres perfectly (sorry for crap picture).
I also tried their 3D version (full screen) but it makes the phone look very cheap.
*Actually the Omoton looks wider.
bolek007 said:
Yesterday I got my Omoton tempered glass (Amazon.co.uk), and I am dissatisfied - the glass does not fit properly on the display (air space on both sides)...
Click to expand...
Click to collapse
My friend has the same protector and it comes with a liquid adhesive to fill the gaps.
c411umuk said:
This is Nillkin's. Similar size* but adheres perfectly (sorry for crap picture).
I also tried their 3D version (full screen) but it makes the phone look very cheap.
*Actually the Omoton looks wider.
Click to expand...
Click to collapse
What was it about the 3D version you felt looked cheap? Was it easy to remove the screen protector?
Right now I'm using the GhostShield by TechGear. They are relatively cheap and difficult to install, but after watching a video on installing them, it was a little easier. They are extremely thin - almost invisible and are self healing, but any dust caught under the protector will result in a bumpy surface. I'm also not entirely sure how great the protection is they offer. My Ringke Fusion case started lifting the to corners of the protector, but I think I stretched the protector (really easy to do with a membrane protector this thin!) slightly as I tried to get the bubbles off the surface.
Still looking for the best solution to protect my screen...
Ally153 said:
What was it about the 3D version you felt looked cheap? Was it easy to remove the screen protector?
...
Click to expand...
Click to collapse
The plastic borders. It was very easy to remove as the plastic borders don't really have much in the way of adhesive.
I will try a Cafele next, when I can be bothered to order one.
Just got both of these two delivered from www.taobao.cn
first one is a anti blue ray with installation frame for exact right positioning and liquid filler for those air gaps along the edges of the protector, the second one is a normal tempered glass protector as a two piece package with the same accessories.
kms108 said:
Just got both of these two delivered from www.taobao.cn
first one is a anti blue ray with installation frame for exact right positioning and liquid filler for those air gaps along the edges of the protector, the second one is a normal tempered glass protector as a two piece package with the same accessories.
Click to expand...
Click to collapse
Could you share full link, please? Would like to buy one for mom Thank you
I got Omoton full coverage tempered glass but i am afraid its not compatible with silicone cases? It is good screen protector but sadly not ideal for cases.
It looks like cases lift screen protector on edges slightly so air gets underneath... Any good screen protectors that are not full coverage so i can still use case?
I bought the nilkin glas but the black borders around the screen protector takes a lot of screen space, I don't recommend it!
Sent from my VTR-L29 using XDA-Developers Legacy app
Benks have a really good one, it's a full coverage with white or black boarder (adhesive covers throughout the whole glass, not just the edges), just like those on the iphone, it curves and cover the edges.
Benks have two version, KR PRO this is also full coverage, glass & plastic sided and XPro+ full glass coverage.
I am using the Benks XPro+ full glass cover and I think it's great. It's a 3D glass screen protector, covers the screen perfectly, right to the edges, with no air bubles. Also it has an oleophobic coating.
D_Grunt said:
I am using the Benks XPro+ full glass cover and I think it's great. It's a 3D glass screen protector, covers the screen perfectly, right to the edges, with no air bubles. Also it has an oleophobic coating.
Click to expand...
Click to collapse
its a good product, i just got a spare one yesterday incase I need it, slightly cheap than my first one.
As I was searching for a screen protector (tempered glass) for my Lenovo z2 plus but was unable to find one with satisfactorily good rating on Amazon or Flipkart
So can someone from India suggest me a good tampered glass screen protector for this device
palgaurav00196 said:
As I was searching for a screen protector (tempered glass) for my Lenovo z2 plus but was unable to find one with satisfactorily good rating on Amazon or Flipkart
So can someone from India suggest me a good tampered glass screen protector for this device
Click to expand...
Click to collapse
I have ordered one from a foreign website. once I receive it, I'll check it out and tell
Still looking for one,Indian site preferred.
n00b_dr0id said:
Still looking for one,Indian site preferred.
Click to expand...
Click to collapse
Got one from a local shop ...it is not a perfect fit but I got it for 80 ₹ only ?
Try Trink Impossible Glass 1/2
Get from official website trinkshop. com . One of the very few branded accessories for our phone. Affordable too @299~399 depending on the version you pick plus COD charges and Delivery Charges. Try and post review here. Supposedly the Impossible Glass is Impossible to Break.
I bought mine from aliexress.
Animel said:
I bought mine from aliexress.
Click to expand...
Click to collapse
Can you please share the link? Does it fill the entire curved edge? Also, can you please attach another photo of front without the back cover?
niyonsv said:
Can you please share the link? Does it fill the entire curved edge? Also, can you please attach another photo of front without the back cover?
Click to expand...
Click to collapse
There is a 1mm gap on each side so screen guard doesn't stick out at the curve. For link search Ali express for nillkin Lenovo zuk z2 screen guard. They have 2 varieties. Matt and clear.
Incrovantilist said:
Get from official website trinkshop. com . One of the very few branded accessories for our phone. Affordable too @299~399 depending on the version you pick plus COD charges and Delivery Charges. Try and post review here. Supposedly the Impossible Glass is Impossible to Break.
Click to expand...
Click to collapse
Read the review: https://www.amazon.in/TRINK-PROTECT...8-1-spell&keywords=trink+pretection+lenovo+Z2
The unbreakable: https://www.amazon.in/Impossible-UnBreakable-Ultimate-Protector-Micromax/dp/B00SOU60Z2
n00b_dr0id said:
Read the review: https://www.amazon.in/TRINK-PROTECT...8-1-spell&keywords=trink+pretection+lenovo+Z2
The unbreakable: https://www.amazon.in/Impossible-UnBreakable-Ultimate-Protector-Micromax/dp/B00SOU60Z2
Click to expand...
Click to collapse
I Told you man, Donot buy from anywhere else other than the official website. In Amazon, more than half of these trink glasses are fake. I Know because a friend of mine tried for his Redmi Note 4X from Amazon. The Product was so fake that you can tell from the packaging itself. Then he came to know about the Official site and bought again and he was pretty much satisfied with the quality. See youtube for reviews of the trink glass bought from the official store. I Myself will try it out once the matte screen guard that came with the phone is worn out by scratches.
So did anybody find a good one for it?
isamkushwaha said:
So did anybody find a good one for it?
Click to expand...
Click to collapse
If by good one you mean tempered glass having no gap in any of the side then.... Sadly No..!
Incrovantilist said:
Get from official website trinkshop. com . One of the very few branded accessories for our phone. Affordable too @299~399 depending on the version you pick plus COD charges and Delivery Charges. Try and post review here. Supposedly the Impossible Glass is Impossible to Break.
Click to expand...
Click to collapse
I have purchased front and back glass from trinkshop official website. The quality is ok. But the main downside is that the front glass does not cover the entire landscape and just like any other tempered glass available anywhere it leaves the edges and top sensors uncovered. It's definitely risky to not apply a back case, but both side glass films provide a fantastic look
samarann said:
I have purchased front and back glass from trinkshop official website. The quality is ok. But the main downside is that the front glass does not cover the entire landscape and just like any other tempered glass available anywhere it leaves the edges and top sensors uncovered. It's definitely risky to not apply a back case, but both side glass films provide a fantastic look
Click to expand...
Click to collapse
I come from using an oneplus x for 2 years with the exact same problem regarding tempered glasses. The reason there is no tempered glass with the perfect fit for these round edged phones is because manufacturers don't intend for people to use one on their phones nowadays. The last six months with my oneplus x I was using the phone with a rigid case and no tempered glass or screen protectors and it still is good with no scratches even after a few screen facing falls. I think the best setup for Z2 plus is the same approach but incase you want some scratch resistance use scratch guard films instead of tempered glasses. The only case i found online that covers the Z2 Plus' screen by giving a little rubber covering on the screen corners (like the spigen ones) is the generic kick stand two-part case. Those cases also give a good look without the kickstand part (picture attached below).
Finally got perfect tempered glass for lenovo z2 plus
I ordered this FAD-E™ Full Coverage Tempered Glass Screen Protector for Lenovo Z2 Plus
It's fitting perfectly and looks awesome. No effect on touch. Please note it's not matt. It's clean tempered glass.
rvhirani said:
I ordered this FAD-E™ Full Coverage Tempered Glass Screen Protector for Lenovo Z2 Plus
It's fitting perfectly and looks awesome. No effect on touch. Please note it's not matt. It's clean tempered glass.
Click to expand...
Click to collapse
Is there the rainbow effect while watching videos at an angle?
Please post close up pics of the tempered glass applied on the phone, with the screen both on and off.
samarann said:
I have purchased front and back glass from trinkshop official website. The quality is ok. But the main downside is that the front glass does not cover the entire landscape and just like any other tempered glass available anywhere it leaves the edges and top sensors uncovered. It's definitely risky to not apply a back case, but both side glass films provide a fantastic look
Click to expand...
Click to collapse
What kind of 'side glass film' they provide? Can you post some pics?
rvhirani said:
I ordered this FAD-E™ Full Coverage Tempered Glass Screen Protector for Lenovo Z2 Plus
It's fitting perfectly and looks awesome. No effect on touch. Please note it's not matt. It's clean tempered glass.
Click to expand...
Click to collapse
Please share a close up pictures of your mobile with FAD-E tempered glass on.
Incrovantilist said:
I come from using an oneplus x for 2 years with the exact same problem regarding tempered glasses. The reason there is no tempered glass with the perfect fit for these round edged phones is because manufacturers don't intend for people to use one on their phones nowadays. The last six months with my oneplus x I was using the phone with a rigid case and no tempered glass or screen protectors and it still is good with no scratches even after a few screen facing falls. I think the best setup for Z2 plus is the same approach but incase you want some scratch resistance use scratch guard films instead of tempered glasses. The only case i found online that covers the Z2 Plus' screen by giving a little rubber covering on the screen corners (like the spigen ones) is the generic kick stand two-part case. Those cases also give a good look without the kickstand part (picture attached below).
Click to expand...
Click to collapse
Using one with Z2 Plus. Very bulky and uncomfortable. Beats the whole purpose of going for a 5 inch phone. Makes the already thick Z2 Plus even more thick
---------- Post added at 01:15 AM ---------- Previous post was at 01:11 AM ----------
rvhirani said:
I ordered this FAD-E™ Full Coverage Tempered Glass Screen Protector for Lenovo Z2 Plus
It's fitting perfectly and looks awesome. No effect on touch. Please note it's not matt. It's clean tempered glass.
Click to expand...
Click to collapse
Beware. These full coverage tempered glasses look and for good but provide no screen protection except for direct scratch resistance. These are not full glue ones. Only the coloured parts have glue and on minor impact these glasses come of. Telling from RN4 experience with multiple friends ..
True protection from tempered glass comes from the ones which are glued thoroughly to the screen.
Glazedinc.com makes such full screen edge to edge full glue screen guards and their Redmi note 4 screen guard is quite popular - probably the best in India but I didn't find any product for Z2 Plus on their website. Maybe people can request them. I already did
If anyone is interested in having this bumper case: https://www.ebay.in/itm/New-Lenovo-...ck-stand-Hybrid-cover-case-black/142458738739 let me know. I bought one for myself but find it a bit bulky and that is just my individual preference. Perfect fit with all cut outs. Same one mentioned and used by this youtuber here: https://www.youtube.com/watch?v=JQ7nXahWVUE&t=2s
The ebay seller has increased the price for some reason (may be low stock). Actual price is 169. Someone preferably from Bangalore, if interestedm PM me
I'm seriously considering the 8.1 when it launches in the next week or two, here in Germany. I'm pretty concerned about being able to get a decent screen protector, though -- I know a lot of recent phones have pretty significant beveling on the display, and it makes it hard to get a glass protector that won't wind up with an ugly gap around the edges.
Does anybody who got their hands on this early use a glass protector? If so, how does the design work? Does it cover the whole display without leaving a gap?
Ghengis042 said:
I'm seriously considering the 8.1 when it launches in the next week or two, here in Germany. I'm pretty concerned about being able to get a decent screen protector, though -- I know a lot of recent phones have pretty significant beveling on the display, and it makes it hard to get a glass protector that won't wind up with an ugly gap around the edges.
Does anybody who got their hands on this early use a glass protector? If so, how does the design work? Does it cover the whole display without leaving a gap?
Click to expand...
Click to collapse
Well I am not very sure of the tempered glass available right now for 8.1 in India that are good so i am just using a flexible fibre glass screen protector and it leaves no air gaps ,covers the screen almost fully but not full,waiting for a decent one in India too,you can probably check out on gadgetsheilds or Ali express there are some good ones
sameermehta2 said:
...i am just using a flexible fibre glass screen protector and it leaves no air gaps ,covers the screen almost fully but not full,waiting for a decent one in India too...
Click to expand...
Click to collapse
When you say "almost fully", do you mean that there is a part of the actual *display* that is not covered? One of the brands of glass cover we got for my kids' phones doesn't quite reach the edge, so when the display is on, a few pixels on either side aren't covered, which means that there is a line through the content shown on screen, from the edge of the protector. It looks terrible and is really distracting to me. Is your protector like that, or does it just not quite reach the edges of the front glass (which is fine)?
Ghengis042 said:
When you say "almost fully", do you mean that there is a part of the actual *display* that is not covered? One of the brands of glass cover we got for my kids' phones doesn't quite reach the edge, so when the display is on, a few pixels on either side aren't covered, which means that there is a line through the content shown on screen, from the edge of the protector. It looks terrible and is really distracting to me. Is your protector like that, or does it just not quite reach the edges of the front glass (which is fine)?
Click to expand...
Click to collapse
Here is a photo
Don't worry about the lines on top they are just smudge ,rubbed it to clean on my shirt,no scratches
I really appreciate you taking the time to post the photo! I can see that it comes within a millimeter or two of the case, which is good, but my concern is that *when the screen is on*, a few pixels might fall outside the protector. Also, I can see a millimeter or two around the edges where the protector is not adhered to the screen (presumably, because the glass is beveled slightly away from it), especially in the lower-left.
So: if the part of the protector that's bonded with the front glass, actually covers the entire screen, and none of the lit pixels are obscured by the "air gap", or outside the protector entirely, that's fine, but I know bezels are getting smaller all the time and a lot of phones really want to have an "edge to edge" display, and the 8.1 certainly follows that trend. I'm looking at your photo next to this one from GSMArena and it looks like some of the active screen could well fall under the beveled edges, and thus make it impossible to apply a flat protector without either "cutting off" part of the screen, or leaving it under an air-gap.
I know this is a pretty minor thing but it nags at me when it happens. My current phone has a totally flat display area, but the screen protector needs to be just a little wider, and inevitably hangs off over the beveled bit slightly, which leaves an obvious air-gap no matter how you place it. If parts of the actual picture were under that section, I think it would drive me a little crazy.
Ghengis042 said:
I really appreciate you taking the time to post the photo! I can see that it comes within a millimeter or two of the case, which is good, but my concern is that *when the screen is on*, a few pixels might fall outside the protector. Also, I can see a millimeter or two around the edges where the protector is not adhered to the screen (presumably, because the glass is beveled slightly away from it), especially in the lower-left.
So: if the part of the protector that's bonded with the front glass, actually covers the entire screen, and none of the lit pixels are obscured by the "air gap", or outside the protector entirely, that's fine, but I know bezels are getting smaller all the time and a lot of phones really want to have an "edge to edge" display, and the 8.1 certainly follows that trend. I'm looking at your photo next to this one from GSMArena and it looks like some of the active screen could well fall under the beveled edges, and thus make it impossible to apply a flat protector without either "cutting off" part of the screen, or leaving it under an air-gap.
I know this is a pretty minor thing but it nags at me when it happens. My current phone has a totally flat display area, but the screen protector needs to be just a little wider, and inevitably hangs off over the beveled bit slightly, which leaves an obvious air-gap no matter how you place it. If parts of the actual picture were under that section, I think it would drive me a little crazy.
Click to expand...
Click to collapse
Yes you are correct the screen is curved and that's why it's very hard to find a tempered glass in India ,as I said there are some available on AliExpress which covers them fully.i had the same problem with nokia7 plus ultimately had to be with the fibre glass option here in my country.
Jeeze. I really wish I could just buy an Android One phone, high-performance CPU, at least 4GB RAM, with a *flat glass front* and a *tough plastic* or *all metal* back (not glass!). Basically I want them to make a modernized Nexus 5, I guess. Oh well, I'll keep shopping...
Is there any full covered tempered glass screen without hole in the chin showing nokia logo?
oninino said:
Is there any full covered tempered glass screen without hole in the chin showing nokia logo?
Click to expand...
Click to collapse
You can check on nilkins website ,but it's not glass it's fiber glass and transparent,it has one benefit though that it comes with camera lens protector too
I'm using an iPhone XS Max tempered glass, and it is a perfect fit
---------- Post added at 06:08 AM ---------- Previous post was at 05:52 AM ----------
innuendo1 said:
I'm using an iPhone XS Max tempered glass, and it is a perfect fit
---------- Post added at 06:08 AM ---------- Previous post was at 05:52 AM ----------
Click to expand...
Click to collapse
this is a joke ?
[/COLOR]
luiszevs said:
this is a joke ?
Click to expand...
Click to collapse
No it's not a joke, I just cannot work out how to embed the pics.
I was in Thailand and needed a replacement screen protector, couldn't find one for Nokia 8.1, they came up with this solution by using an iPhone XS Max one, and I'm happy with the result. In fact it is a better fit than the Nillkin one I was originally using.
I have pics but cannot post links as I have under 10 posts. Just wanted to share as there are not many options available for this one.
Cheers
innuendo1 said:
[/COLOR]
No it's not a joke, I just cannot work out how to embed the pics.
I was in Thailand and needed a replacement screen protector, couldn't find one for Nokia 8.1, they came up with this solution by using an iPhone XS Max one, and I'm happy with the result. In fact it is a better fit than the Nillkin one I was originally using.
I have pics but cannot post links as I have under 10 posts. Just wanted to share as there are not many options available for this one.
Cheers
Click to expand...
Click to collapse
Just upload the image and give us the img url, and someone will upload is for u
innuendo1 said:
[/COLOR]
No it's not a joke, I just cannot work out how to embed the pics.
I was in Thailand and needed a replacement screen protector, couldn't find one for Nokia 8.1, they came up with this solution by using an iPhone XS Max one, and I'm happy with the result. In fact it is a better fit than the Nillkin one I was originally using.
I have pics but cannot post links as I have under 10 posts. Just wanted to share as there are not many options available for this one.
Cheers
Click to expand...
Click to collapse
no seriously, i don't understand how? iPhone XS Max and Nokia 8.1 have different sizes... really, i don't understand, how it's possible
kt1755 said:
Just upload the image and give us the img url, and someone will upload is for u
Click to expand...
Click to collapse
I sent via message shared linked to luiszevs of the screen protector fitted.
I'm only trying to help here, by sharing what I've had done.
Cheers
from @ innuendo 1 "Here's the pics of the iphone XSMax Tempered glass, on my Nokia 8.1
https://photos.app.goo.gl/PtBhAQ8p4WVgpUJm8
https://photos.app.goo.gl/pN9QQDHapt6v6CGJ8
https://photos.app.goo.gl/LcgyqfvGiazZeDNW7 "
luiszevs said:
from @ innuendo 1 "Here's the pics of the iphone XSMax Tempered glass, on my Nokia 8.1
https://photos.app.goo.gl/PtBhAQ8p4WVgpUJm8
https://photos.app.goo.gl/pN9QQDHapt6v6CGJ8
https://photos.app.goo.gl/LcgyqfvGiazZeDNW7 "
Click to expand...
Click to collapse
Thank you
I tried to get one from so many places without any luck, if you've been to Bangkok there's 100's and 100's of mobile places but none had anything for Nokia 8.1.
This is the what I ended up with, and bought a couple of spares as well
innuendo1 said:
I sent via message shared linked to luiszevs of the screen protector fitted.
I'm only trying to help here, by sharing what I've had done.
Cheers
Click to expand...
Click to collapse
Sr, I'm not here frequently, but i see someone post the img for u.
What screenprotector do you guys use? I have one but it doesnt fit the hole screen...
Can i stil replace it if i want to or?