Bricked Cube T8 Plus - Android Q&A, Help & Troubleshooting

Hi everyone,
I managed to brick my Cube T8 Plus trying to root it. Now it is no longer recognised by Windows, does not turn on does not get into recovery. Any hope?

So desperate for some help here...:crying:

This is my problem too. I even can not find rom for it . i got it last week and i am sure it was 20160225 virsion.

Same problem here.
Recovery is working but it is not recognized by the pc (windows 10).
I tried to transfer a file by using a SD card but it does not appear on the recovery (install zip metod).
Try the SP flash tool.
its seems to be crashing on my PC.
any suggestions ?
You can download the file T8-PLUS_V1.0_20160218. use google to find and download it.
it contains the SP flash tool and a list.
tell me if you succeeded.
i didnt

Also same problem
I think I made a misstake and formated my whole Cube T8plus.
So I wonder if someone have a backup to share that I can try to use for recovery?

Related

[Q] Clockworkrec

I tried other forums now trying the best
I have been really dumb and bricked my Samsung Ace, I was trying to backup the ROM and used software found (apparently I can not link the page)
I have tried using ODIN but the computer while assigning a drive letter will not access the phone. I have downloaded Kiies but that does not work, I have tried holding the power and vol button but no
However I have access to System Recovery, where I get an error message of E:failed to mount, I have put clockwork rec on the SD card and there are various options including mounting objects.
I have now spent 5 days tring to resolve this so really looking for some guidance before I screw up even more
Or will clockworkrec not work
Any advice appreciated!!!
communication
Can I ask a question if anyone knows an answer.
How is it that the PC recognizes the phone and loads the usb drivers, modem and so on yet I can not access it?
Odin the new version wil not communicate with the phone but Odin 3.07 will recognize that is connected to the phone but will not communicate with it/
Does anyone know the answer?
Friend OK I insist u that try this method.
1) install USB drivers in pb
2)download any custom Tom
3)use yaffs tool to change system folder In .img file
4)flash it using ADT( android download tool)
If u need more help just PM me
I am an expert for flashing rom using adt coz I have bricked my phone 1000000 times and solved it using ADT.
HIT THANKS IF HELPED........
Sent from moon to earth........

Vodafone Smart 4 Mini (V785) (Original Stock rom)

Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I havenĀ“t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?

[Q] Alcatel OT-4033X bricked

Hello
Today I tried to update my phone OT-4033X with Custom ROM, but the process did not work and he stock in logo boot
i tried the flash it with backup i already take with MTK Droid Tools
after i did format from SP flash tool like tuto in net
and i go for Download but the process does not succeed and give me "s_not_enough_storage_space (1011)" in SP flash Tool
I tried with several copy
SP-Flash-Tool-v3.1344.0.212
SP_Flash_Tool_v3.1316.0.150
SP_Flash_Tool_v5.1348.00
and alcatel Mobile Upgrade S does not recognize the phone
any solutions pls
and sorry for my bad english
Have you fix that BROM ERROR? I'm having the same problem too. :crying::crying::crying:
Hi,
I had the same issue with mine 4033x. I managed to fix it by fallowing the instructions on this site:
http://www.thefirmwarehub.com/alcatel-pop-c3-stock-rom/
but instead of the included scatter file (MT6572_Android_scatter) use the one attached to this post.
I hope this will help.
Regards.

[Q] help after installing miui rom cubot phone hustle

hi! i have cubot s208(a) . i rooted,yes. my problem with the phone was it was slow and laged specially watching videos. everyday i could do nothing but restart it. so i thought nice hardware but the problem must be rom or kernel so i decided i install custom rom. but there are no for this phone exept i found on this site miui v5. i did some backup with MTKdroid tools.(image is still on my pc,but unfortunatelly not on my phone) i put miui rom on internal card,i went to cwm there i wiped cache and data...install miui zip file all no problem,but after reboot on cubot logo some funny colours and then just black screen...nothing else happens. i went to cwm again tried restore but no backup there.i tried install backup with MTKdroid tools,but phone wont be recognized. i tried put images from pc to sd card but it wont work.i tried flash tools,i downloaded 2 firmware stock roms (unfortunately they aint zip) but again flash tools wont work because it wont connect with phone.(with usb cable) if i just connect phone with pc it auto turns him on.i tried zipping those 2 roms,but after trying in cwm it says install aborted (way i figured i need real stock rom but in zip file) funny no way i can find it.only roms that i can use with flashtools.
so...anyone knows what can i do please say
edit
i fixed it
somehow i suceeded installing mobistel cynus driver (for usb) then i went to sp flash tools. there was other problems... but there i first format phone.then just flash preloader.then everything else.et voila!only problem left is invalid imei.but i guess it will be easy to fix,right now i go to sleep.last 30 hours i slept 6 hours,other time i spent on pc.hope i help somebody.dont forget to backup your phones!
good night and good fight!

Anyone here with a working GSmart Rey R3?

Can someone who has this phone please do me a favour? I bricked it and need a backup that can be used in Sp flash tool. If you have this phone, could you be so kind and make that backup then upload it somewhere I can download it and restore my phone?
Here is tutorial link: https://forum.xda-developers.com/showthread.php?t=2540400 (Dump rom section)
I don't need to enter Android, just recovery to flash stock rom, you don't have to worry about deleting personal data (put a PIN or something)
Thanks in advance!
EDIT: after 2 days of trying to fix this phone, I have finally found what I needed and successfully restored it. Now it's working!
This is the file: https://yadi.sk/d/t2ejuvsjg5GyW
Can you help me please.
My friend ask me to help him with this phone. It won't boot at all, and when I connect it to PC Windows make sound (USB Device connected) and after few seconds again (USB Device disconnected) and all over again. Nothing shows up in Computer window nor at Device Manager.
Can I unbrick it whit this files that you upload?
Can you write some instructions how to do it, please?

Categories

Resources