Need Scatter File
Please Help Me !
Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42018874D002211B
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42018874D002211B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 13C3F3528A921A594F14348381D36169
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : Vodafone
ProdName : Vodafone_Smart_Tab_4
ProdModel : Vodafone Smart Tab 4
Device : Vodafone_Smart_Tab_4
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.TABLET.MP.V1
Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
Operation : Remove Viruses [SmartAV] [ v1.47 ]
SmartAV Conf : 100/80/2000
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42018874D002211B
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42018874D002211B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 13C3F3528A921A594F14348381D36169
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Related
I have not found a lot of information regarding this particular application and hoped that someone could shed some light on the Error Code 502.
It looks to me like this kdz file is having trouble with the phone type:
*I.E. -
*[18:14:43:484] : VM670ZV4
*[18:14:43:484] : First two character of model name is not BS
Any chance that I have over looked the correct kdz file?
I have seen the correct cab file for the VM670ZV4 but this particular phone can only go into Emergency Mode at present. So I believe the only way I will resurrect this device is with a kdz update.
I would really appreciate constructive input.
Thank you in advance.
LOG:
[18:14:24:203] : =============================================
[18:14:24:203] : Log is started on 14.06.2011, at 18:14:24:203,
executable: C:\Documents and Settings\Todd Gardner\Desktop\Optimus V\KDZ_FW_UPD_EN\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00000724),
compile time : Dec 8 2010 09:19:37
[18:14:24:203] : Version :
[18:14:24:218] : Get Usb Port
[18:14:24:218] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM10)
[18:14:24:218] : Remove Standard Serial over Bluetooth link (COM10)
[18:14:24:218] : rsi.strFriendlyName=Standard Modem over Bluetooth link
[18:14:24:218] : Remove Standard Modem over Bluetooth link
[18:14:24:218] : rsi.strFriendlyName=Agere Systems AC'97 Modem
[18:14:24:218] : Remove Agere Systems AC'97 Modem
[18:14:24:218] : rsi.strFriendlyName=LGE CDMA USB Serial Port (COM18)
[18:14:24:218] : FriendlyNameList[iii].szFriendlyName=LGE CDMA USB Serial Port
[18:14:24:218] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM18
[18:14:24:234] : Port = COM18
[18:14:29:265] : RX Timeout : 5.0 seconds
[18:14:29:265] : RX TIMEOUT
[18:14:29:281] : UNKNOWN : Req(12) -> Rsp(13)
[18:14:34:312] : RX Timeout : 5.0 seconds
[18:14:34:312] : RX TIMEOUT
[18:14:34:312] : >> DIAG_STATUS_F FAILED
[18:14:34:328] : >>Get Model Name [DIAG_VERNO_F]
[18:14:34:343] : BAD CONN MODE : Req(0) -> Rsp(3)
[18:14:37:375] : RX Timeout : 3.0 seconds
[18:14:37:375] : RX TIMEOUT
[18:14:37:390] : BAD CONN MODE : Req(0) -> Rsp(3)
[18:14:40:421] : RX Timeout : 3.0 seconds
[18:14:40:421] : RX TIMEOUT
[18:14:40:437] : BAD CONN MODE : Req(0) -> Rsp(3)
[18:14:43:468] : RX Timeout : 3.0 seconds
[18:14:43:468] : RX TIMEOUT
[18:14:43:468] : FAIL (No Phone)
[18:14:43:468] : GetModelName() Operation Failed Check Diag CMD
[18:14:43:468] : EMERGENCY Booting Mode
[18:14:43:468] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[18:14:43:484] : VM670ZV4
[18:14:43:484] : First two character of model name is not BS
[18:14:43:484] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - No Phone
[18:14:43:484] : GetEmergencyModelName in Emergency Mode - FAILed (No Phone)
[18:14:43:484] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[18:14:43:484] : Close Port<<
[18:14:43:484] : TYPE_WPARAM_UPGRADE_ERROR
[18:14:43:484] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 502
[18:14:43:531] : Log finished
Need Help, I just flashing using KDZ for Ginger Bread Rumania Official.
In the middle way, KDZ is stuck and my O1 in Emergency Mode. I just wait untill Finnish. But not yet finish..
This is the log:
[16:45:54:075] : =============================================
[16:45:54:075] : Log is started on 03.07.2011, at 16:45:54:075,
executable: D:\Master\Android\Cara Flash ROM\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00000b70),
compile time : Dec 8 2010 09:19:37
[16:45:54:075] : Version :
[16:45:54:077] : Get Usb Port
[16:45:54:102] : rsi.strFriendlyName=Agere Systems HDA Modem
[16:45:54:102] : Remove Agere Systems HDA Modem
[16:45:54:102] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM5)
[16:45:54:102] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[16:45:54:102] : rsi.strFriendlyName=LGE Android Platform USB GPS NMEA Port (COM6)
[16:45:54:102] : Remove LGE Android Platform USB GPS NMEA Port (COM6)
[16:45:54:102] : rsi.strFriendlyName=ZTE Service Port FFF1 (COM14)
[16:45:54:102] : Remove ZTE Service Port FFF1 (COM14)
[16:45:54:102] : rsi.strFriendlyName=ZTE Voice Port FFF1 (COM15)
[16:45:54:102] : Remove ZTE Voice Port FFF1 (COM15)
[16:45:54:102] : rsi.strFriendlyName=ZTE Diagnostics Port FFF1 (COM16)
[16:45:54:102] : Remove ZTE Diagnostics Port FFF1 (COM16)
[16:45:54:102] : rsi.strFriendlyName=ZTE GPS Port FFF1 (COM17)
[16:45:54:102] : Remove ZTE GPS Port FFF1 (COM17)
[16:45:54:102] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM5
[16:45:54:102] : Port = COM5
[16:45:54:114] : >> DIAG_STATUS_F FAILED
[16:45:54:119] : >>Get Model Name [DIAG_VERNO_F]
[16:45:54:120] : strModel = P500
[16:45:54:120] : Read NV item: 71 NV ITEM 71 [71]
[16:45:54:121] : CSW
[16:45:54:121] : Banner : CSW
[16:45:54:121] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[16:45:54:132] : Write NV item:9028 NV ITEM 9028
[16:45:54:132] : 9028 - NV_DONE_S Item
[16:45:54:232] : _DloadMode()
[16:45:54:238] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_CHANGE_DLOAD 4
[16:45:54:238] : >>Change Offline Mode [DIAG_CONTROL_F/Mode = 1]
[16:45:54:249] : >>Change Dload Mode [DIAG_DLOAD_F]
[16:45:54:250] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - DLOAD
[16:45:54:250] : DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[16:45:54:250] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[16:45:54:250] : Close Port<<
[16:46:34:251] : EMERGENCY Booting Mode
[16:46:34:251] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[16:46:34:262] : BS/P500/7D
[16:46:34:262] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[16:46:34:262] : >> GET DLOAD COMM MODE
[16:46:34:263] : [GetCommMode] Communication mode : 2
[16:46:34:263] : Pre Nand Download
[16:46:34:263] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[16:46:34:263] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[16:46:34:264] : [COM5] >>NandFlashInitWithFile(PARTITION TBL)
[16:46:34:264] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[16:46:34:366] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[16:46:34:366] : [COM909520946] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[16:46:34:366] : [COM5] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[16:46:34:371] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[16:46:34:383] : [COM909520946] >>Dl_AsyncWrite()
[16:46:34:383] : >> AMSS FLASHING ...
[16:46:34:386] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[16:46:34:386] : Sending Pkt Seq : 0
[16:46:34:386] : Sending Pkt Seq : 1
[16:46:34:386] : Sending Pkt Seq : 2
[16:46:34:386] : Sending Pkt Seq : 3
[16:46:34:386] : Sending Pkt Seq : 4
:
:
:
[16:47:50:926] : Sending Pkt Seq : 50158
[16:47:50:926] : Sending Pkt Seq : 50159
[16:47:53:933] : RX Timeout : 3.0 seconds
[16:47:53:933] : RX TIMEOUT
[16:47:56:944] : RX Timeout : 3.0 seconds
[16:47:56:944] : RX TIMEOUT
[16:47:59:950] : RX Timeout : 3.0 seconds
[16:47:59:950] : RX TIMEOUT
[16:47:59:950] : [COM909520946] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[16:47:59:950] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[16:47:59:950] : Close Port<<
[16:47:59:950] : TYPE_WPARAM_UPGRADE_ERROR
[16:47:59:950] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 500
[16:48:00:007] : Log finished
Click to expand...
Click to collapse
After that, I unplug the USB, My O1 still emergency mode. I can't Power ON or OFF, I just plug out the battery.
After that, My phone can't Power ON or Communication with my Computer.
Somebody can help me?
Thnx anyway.
osana412 said:
I can't Power ON or OFF, I just plug out the battery.
After that, My phone can't Power ON or Communication with my Computer.
Click to expand...
Click to collapse
Never ever do this. In emergency mode it is still recoverable. If you cannot power on the phone, well... you have a nice brick. Unless you have a JTAG (if you wonder WTH it is then you don't ) just head to nearest LG service center to have the PCB changed
Oh no.... It is true?
No other way to fix it?
osana412 said:
Oh no.... It is true?
No other way to fix it?
Click to expand...
Click to collapse
No. LG service is best option. JTAG costs half the phone.
Never loose the yellow emergency mode. If the phone is in warranty just tell them u were updating through PC suit and now its dead. (Don't say bricked)
Sent from my LG-P500 using XDA Premium App
ok2... ic..... I will tell them like that..
What is LG Service will do with my phone? change the PCB or what? I'm very curious..
Does emergency mode yellow screen still appears or not, if it does you still have hope you can flash froyo kdz file onto the phone many tutorials are there that can help
Sent from my LG-P500 using XDA App
osana412 said:
ok2... ic..... I will tell them like that..
What is LG Service will do with my phone? change the PCB or what? I'm very curious..
Click to expand...
Click to collapse
Yes they change the PCB you get a new imei.
Sent from my LG-P500 using XDA Premium App
Emergency mode= back button+vol up+power
Good luck.
No. My false is unplug the battery.. and my phone is death...
So I decided to Root my Android Optimus One LG-P504 and that went over well. Soon after I wanted a faster phone, so I attempted to put the Oxygen custom ROM on it, and messed up somewhere. I Then began to try and fix it using a few different methods, none have worked. I am now sitting with my phone completely unusable and sitting in Emergency Mode.
Solutions I've Tried:
_____________________________________
KDZ_FW_UPD.exe and I get this far
[
[01:43:20:203] : =============================================
[01:43:20:203] : Log is started on 14.03.2012, at 01:43:20:203,
executable: F:\Download\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00000cf8),
compile time : Sep 13 2010 11:34:51
[01:43:20:203] : Version :
[01:43:20:234] : Get Usb Port
[01:43:20:234] : rsi.strFriendlyName=LGE Bluetooth TransPort (COM4)
[01:43:20:234] : Remove LGE Bluetooth TransPort (COM4)
[01:43:20:234] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM6)
[01:43:20:234] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[01:43:20:234] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM6
[01:43:20:234] : Port = COM6
[01:43:20:250] : UNKNOWN : Req(12) -> Rsp(13)
[01:43:20:265] : UNKNOWN : Req(12) -> Rsp(13)
[01:43:20:281] : UNKNOWN : Req(12) -> Rsp(13)
[01:43:20:281] : >> DIAG_STATUS_F FAILED
[01:43:20:296] : >>Get Model Name [DIAG_VERNO_F]
[01:43:20:312] : BAD CONN MODE : Req(0) -> Rsp(3)
[01:43:20:328] : BAD CONN MODE : Req(0) -> Rsp(3)
[01:43:20:343] : BAD CONN MODE : Req(0) -> Rsp(3)
[01:43:20:359] : BAD CONN MODE : Req(0) -> Rsp(3)
[01:43:20:375] : BAD CONN MODE : Req(0) -> Rsp(3)
[01:43:20:390] : BAD CONN MODE : Req(0) -> Rsp(3)
[01:43:20:390] : FAIL (No Phone)
[01:43:20:390] : GetModelName() Operation Failed Check Diag CMD
[01:43:20:390] : EMERGENCY Booting Mode
[01:43:20:390] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[01:43:20:406] : BS/P504/7Dd\Tail.exe
[01:43:20:406] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P504
[01:43:20:421] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[01:43:20:421] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[01:43:20:437] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[01:43:20:437] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[01:43:20:453] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[01:43:20:453] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[01:43:20:453] : NV Write Fail : NV ITEM 9028(9028)
[01:43:20:562] : >> GET DLOAD COMM MODE
[01:43:20:578] : [GetCommMode] Communication mode : 2
[01:43:20:578] : Pre Nand Download
[01:43:20:578] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[01:43:20:578] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[01:43:20:593] : [COM6] >>NandFlashInitWithFile(PARTITION TBL)
[01:43:20:593] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[01:43:20:625] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[01:43:20:625] : [COM1783997892] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[01:43:20:625] : [COM6] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[01:43:20:625] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[01:43:20:640] : [COM1783997892] >>Dl_AsyncWrite()
[01:43:20:640] : >> AMSS FLASHING ...
[01:43:20:640] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[01:43:20:640] : Sending Pkt Seq : 0
[01:43:20:640] : Sending Pkt Seq : 1
[01:43:20:640] : Sending Pkt Seq : 2
[01:43:20:640] : Sending Pkt Seq : 3
[01:43:20:640] : Sending Pkt Seq : 4
[01:43:20:640] : Sending Pkt Seq : 5
[01:43:20:640] : Sending Pkt Seq : 6
[01:43:20:640] : Sending Pkt Seq : 7
[01:43:20:640] : Sending Pkt Seq : 8
[01:43:20:640] : Sending Pkt Seq : 9
[01:43:20:656] : Dl_AsyncWrite - ErrNo(45), Addr(0x00004800), NandErrNo(0x04)
[01:43:20:656] : [COM1783997892] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[01:43:20:687] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[01:43:20:687] : Close Port<<
[01:43:20:687] : TYPE_WPARAM_UPGRADE_ERROR
[01:43:20:687] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[01:43:20:703] : Log finished
]
And then get this error
Upgrade Error
WParam : 100
LParam: 4008
_________________________________________
Clearly The fastboot will not work for me since I am stuck in the Yellow Emergency Mode screen.
_________________________________________
Hardboot is not working
_________________________________________
Does anyone have a possible solution for this?
Dude you have bricked your cell,go to LG gallery..
handryg555 said:
Dude you have bricked your cell,go to LG gallery..
Click to expand...
Click to collapse
Dang, Thanks guess ill have to take it in later this week. So will i be paying for it?(If you know)
if u have warranty thn they will do it free of cost...
just tell them u left the phone for charging and slept in the night and this happend when u saw it after u woke up...
Ashkore said:
Dang, Thanks guess ill have to take it in later this week. So will i be paying for it?(If you know)
Click to expand...
Click to collapse
no, I guess, if it is under warranty...but don't let them know, what u were exactly trying to do (rooting and all) else the warranty will get void...
tell them that, this was what u saw, when u woke up today n switched on the phone... u may get lucky enough...
Edit: oops sorry...exactly the same thing already replied...
Well, I had the same problem and this is what I did:
1. Install the LG Drivers for the phone.
2. Remove the SD Card if you have one.
3. Put the phone into EMERGENCY MODE!!
4. Set the Type to '36QCT' and the PhoneMode to 'CS_EMERGENCY'.
5. Download the KDZ file. (V20E_00.kdz)
6. Launch the Software Update.
7. If this fails, retry this steps on a computer running Windows XP.
If I helped, please donate!
this might help u
http://androidforums.com/lg-optimus-one-p500/484017-story-my-wal-mart-family-mobile-phone.html
http://forum.xda-developers.com/showthread.php?t=1316514
Ezpanio said:
Well, I had the same problem and this is what I did:
1. Install the LG Drivers for the phone.
2. Remove the SD Card if you have one.
3. Put the phone into EMERGENCY MODE!!
4. Set the Type to '36QCT' and the PhoneMode to 'CS_EMERGENCY'.
5. Download the KDZ file. (V20E_00.kdz)
6. Launch the Software Update.
7. If this fails, retry this steps on a computer running Windows XP.
If I helped, please donate!
Click to expand...
Click to collapse
Thats V20E.dkz file, where did you get that? I could not seem to find the right firmware for my phone, none for America, I ended up just grabbing the UK one.
Hey guys, i was upgrading from old 2.2 baseband to 2.3 baseband using lgmdp.exe method . described here http://forum.xda-developers.com/showthread.php?t=1149530
however when i did that burning eeprom froze in d middle . it wont progress any further as shown in the image. consequently i had to remove my phone which was in emergency mode at that time. i plugged it again but lgmdp.exe just wont read it.
I panicked removed the battery and then the phone wont start . (earlier i was using cm7 rc1 with old baseband using nightlyfour rom's patch) .howver i was able to get it back into recovery mode by pressing back and volume up keys together while starting the phone. i flashed stock 2.3 using kdz ,IT WORKED my phone gets netwokr and calls as normal but i think my baseband is somewat corrupted as is shown in kdz log.
[13:41:22:694] : =============================================
[13:41:22:694] : Log is started on 24.03.2012, at 13:41:22:694,
executable: E:\Android\ROMS\Original Tools\KDZ_FW_UPD_EN\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x000012ec),
compile time : Sep 13 2010 11:34:51
[13:41:22:694] : Version :
[13:41:22:696] : Get Usb Port
[13:41:22:702] : rsi.strFriendlyName=LGE Bluetooth TransPort (COM4)
[13:41:22:702] : Remove LGE Bluetooth TransPort (COM4)
[13:41:22:702] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM13)
[13:41:22:702] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[13:41:22:702] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM13
[13:41:22:702] : Port = COM13
[13:41:22:705] : UNKNOWN : Req(12) -> Rsp(13)
[13:41:22:706] : UNKNOWN : Req(12) -> Rsp(13)
[13:41:22:707] : UNKNOWN : Req(12) -> Rsp(13)
[13:41:22:707] : >> DIAG_STATUS_F FAILED
[13:41:22:712] : >>Get Model Name [DIAG_VERNO_F]
[13:41:22:713] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:714] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:715] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:716] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:717] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:718] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:718] : FAIL (No Phone)
[13:41:22:718] : GetModelName() Operation Failed Check Diag CMD
[13:41:22:718] : EMERGENCY Booting Mode
[13:41:22:718] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[13:41:22:719] : BS/P500/7D\ROMS\Original Tools\Tail.exe
[13:41:22:719] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[13:41:22:730] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[13:41:22:730] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[13:41:22:731] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[13:41:22:731] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[13:41:22:742] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[13:41:22:742] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[13:41:22:742] : NV Write Fail : NV ITEM 9028(9028)
[13:41:22:842] : >> GET DLOAD COMM MODE
[13:41:22:843] : [GetCommMode] Communication mode : 2
[13:41:22:843] : Pre Nand Download
[13:41:22:843] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[13:41:22:843] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[13:41:22:844] : [COM13] >>NandFlashInitWithFile(PARTITION TBL)
[13:41:22:844] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[13:41:22:936] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[13:41:22:936] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[13:41:22:936] : [COM13] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[13:41:22:940] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[13:41:22:952] : [COM14] >>Dl_AsyncWrite()
[13:41:22:952] : >> AMSS FLASHING ...
[13:41:22:956] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[13:41:22:956] : Sending Pkt Seq : 0
[13:41:22:957] : Sending Pkt Seq : 1
[13:41:22:958] : Sending Pkt Seq : 2
[13:41:22:958] : Sending Pkt Seq : 3
[13:41:22:958] : Sending Pkt Seq : 4
note that i had taken nv2 backup before upgrading baseband which i cant restore now coz lgmdp.exe doesnt read my phone it detects but is unable to read any info no imei no bluetooth address
Now i am using cm7 rc wid new baseband but sometimes baseband in settings shows wild characters ! any inputs ????
Your basebamd is ok!This bug is from the rom... I have this too
Sent from my LG-P500 using xda premium
can u explain why lgmdp wont read it anymore. i think its coz of some temporary files mayb . also does successful flashing from kdz means baseband is ok ? baseband resides on a separate partition right ?
sarfaraz1989 said:
can u explain why lgmdp wont read it anymore. i think its coz of some temporary files mayb
Click to expand...
Click to collapse
Don't know, doesn't matter
sarfaraz1989 said:
also does successful flashing from kdz means baseband is ok ?
Click to expand...
Click to collapse
Yes
sarfaraz1989 said:
baseband resides on a separate partition right ?
Click to expand...
Click to collapse
Yes, for example:if you flash mik's cm7 or some custom rom made for old bb you won't get signal...
Hello my personal x400 positixo this rom with damaged did not find support firmware conpativel any possibility of find compatible firmware
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : 00B000B000B000B000B0000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ...