Downloads:
- G900P_PCA_Stock_Deodexed_Rooted_ROM.zip
- G900P_PCA_Stock_Modem+Bootloader.tar.md5 (Required!)
- G900P_PCA_Stock_Recovery.tar.md5 (Optional)
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Flash with TWRP.
3. Completely turn off device (important!) then boot into Download Mode and Odin flash the Modem and Bootloader. The ROM will not boot without them!
4. After a reboot the device will remain on the Sprint splash screen for 10 - 15 minutes before completely rebooting.
Tip: For faster speed turn off animations from Developer Options!
Optional:
- G900P_PCA_Batch_Debloater (Customizable)
Kernel:
- Stock kernel with chainfire's sepolicy patch and BETA SuperSu v2.74.
Notes:
- Your knox warranty bit will be tripped!
- No need to wipe prior to flashing, the ROM will automatically wipe system and userdata.
Thanks for making this dude! Any bugs you know of?
Thanks man! I've been waiting for something like this that makes the update worth trying. Can't wait to update after work.
chippinganimal said:
Thanks for making this dude! Any bugs you know of?
Click to expand...
Click to collapse
It's untouched stock, other than deodexed and root, so it should be solid.
@muniz_ri I'm happy to meet you on the s5. I'm grateful
Is the SD Card corrupted issue fixed and if so how did you do it?
pyromayniyak said:
Is the SD Card corrupted issue fixed and if so how did you do it?
Click to expand...
Click to collapse
That issue was only in the other rom by @malbert16442. This one is workjng fine.
can i go from stock rooted NK4 directly to this? is a factory reset required (or just "highly recommended")?
dmolavi said:
can i go from stock rooted NK4 directly to this? is a factory reset required (or just "highly recommended")?
Click to expand...
Click to collapse
I would recommend reseting unless your flashing a rom on the same android version.
chippinganimal said:
I would recommend reseting unless your flashing a rom on the same android version.
Click to expand...
Click to collapse
Thanks....will do. But no problems going from NK4 to PCA? Will backups from Titanium work across from 4.4.4 to 6.0.1?
dmolavi said:
Thanks....will do. But no problems going from NK4 to PCA? Will backups from Titanium work across from 4.4.4 to 6.0.1?
Click to expand...
Click to collapse
Yeah there should be no issues as long as you follw the instructions in the OP. Sorry but i dont really have experiece with using titanium backup, so i wouldnt know how that would work...
Copy that. Fingers crossed (and nandroid backup, here i come)
dmolavi said:
Copy that. Fingers crossed (and nandroid backup, here i come)
Click to expand...
Click to collapse
Your only issue maybe Applications versions. You are jumping from KK to MM. Download the newest Apps and restore only Data.
Sent from my SM-G900P using Tapatalk
hmmm i'm getting a corrupt zip file notice in TWRP when trying to flash this from internal memory.
dmolavi said:
hmmm i'm getting a corrupt zip file notice in TWRP when trying to flash this from internal memory.
Click to expand...
Click to collapse
booted up for me, at the setup screen now. Try redownloading it... maybe a corrupt download
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
@muniz_ri maybe you could create another version of the rom that is more debloated of most of the sprint crap that is preinstalled other than that thanks for making this rom bro!
I tried 4 different downloads. Does it need to be in the root of the internal memory? Or renamed? It keeps saying it's failing validation...twrp 3.0.2.0.
dmolavi said:
I tried 4 different downloads. Does it need to be in the root of the internal memory? Or renamed? It keeps saying it's failing validation...twrp 3.0.2.0.
Click to expand...
Click to collapse
i just downloaded it through the internet app on my phone which placed it in the downloads folder and flashed twrp, same version you are running, wiped everything, and selected the zip, and it installed. I dunno whats going on with your phone though :/
chippinganimal said:
i just downloaded it through the internet app on my phone which placed it in the downloads folder and flashed twrp, same version you are running, wiped everything, and selected the zip, and it installed. I dunno whats going on with your phone though :/
Click to expand...
Click to collapse
I didn't do a wipe...but that shouldn't impact the validation.
Will not load into Odin after flashing...
Downloaded, flashed, and tried to Odin the bootloader and modem, but phone will not be recognized by Odin. Sugesstions?
what slot do i put the modem/bootloader in? BL or CP? and do i need to get rid of the .md5 extension first?
Edit - put it in BL, odin said pass. Now i'm sitting at the "Sprint" (white background) splash screen. I'll let it simmer for a while. Fingers crossed again
Edit 2 - Hot sh!t...I'm up and running. 10 minutes on the Sprint splash screen. Now to redownload my apps and restore all the data. Ten thumbs up
Related
If you are rooted in V10G with Tmobile P769, then you can bypass OTA and go straight to rooted V20D JB with CWM already installed.
Here is a copy of rooted CWM back up of P769 V20D
http://forum.xda-developers.com/showpost.php?p=40775018&postcount=772
The latest lock boot loader CWM (v1.5) for JB is here.
http://forum.xda-developers.com/showpost.php?p=36620368&postcount=1
The radio update zip file is here.
http://forum.xda-developers.com/showpost.php?p=40844363&postcount=37
1) First delete the version 1.4 CWM
>>> 1. Delete /system/bootstrap directory
>>> 2. Delete /system/bin/e2fsck file
>>> 3. Rename /system/bin/e2fsck.bin file to e2fsck
2) Download and install version 1.5 CWM
3) If you have Titanium Back up, make a fresh back up.
4) Download and copy V20D back up folder to clockworkmod back up folder.
4.5) Download and copy radio.zip to SD.
5) Reset and go into CWM.
6) set the back up format to 'tar'
7) run Back up to external SD. This will give you a latest back up of you V10G.
8) run Restore from external SD and find the V20 back up folder.
8.5) run Install Zip from SD for the radio.zip file. NOTE this update takes 2-3 min. Do not panic.
9) When the opration is finished, reboot.
You should be in a fresh rooted V20D JB. Now download Titanium Back up and restore your apps.
Please thank the file contributors in their posts for their effort.
__________. _________________________________________________________________________
Original post is not related to above and removed to lessen the confusion.
removed.
mjb1994 said:
(ge.tt/547NI4f/v/0) there is the link for my whole cache including the OTA.
As for android updating, it has been 14 min and it just now finished fully booting
I will post again after I restore root
Update: I was able to successfully restore root with Voodoo OTA RootKeeper
Just like everyone else has stated although, While in SuperSU the first re-installation failed, but you just go back into the app and install it again and it successfully installs the su binaries
I find it hilarious and awesome that I haven't had to re root the phone since I got it in February and rooted with 10e (when the method was easy). I used Voodoo for 10G and now with 20D
The whole process took a good 15 min.
Click to expand...
Click to collapse
here's MJB's entire cache folder, it may or may not have the SBin.
removed.
Need the KDZ file t flash in!
csrow said:
Here is the link to the OTA zip file posted by Lelus.
https://dl.dropboxusercontent.com/u/54534987/ad6729f33f2f.ota_update_V10g_MR_FINAL_to_V20d_JB_QA_FINAL.zip
Just need to find the other file to see if it can trigger the update.
Click to expand...
Click to collapse
hi. I can't find original post of this. I d-loaded zip but don't know how to apply properly without losing root. can you either point me to the thread or tell me if I should just use voodoo then flash with CWM?
removed.
I have restored the rooted backup. Works great except for loss of service. The update included new radio. Anyone able to make a flash able zip?
Sent from my Nexus 4 using Xparent Skyblue Tapatalk 2
Somairotevoli said:
I have restored the rooted backup. Works great except for loss of service. The update included new radio. Anyone able to make a flash able zip?
Sent from my Nexus 4 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
Not sure if there is a way to upgrade radio via cwm. You can try replacing /system/bin/rild to one from ics
TFT_xKripple said:
here's MJB's entire cache folder, it may or may not have the SBin.
Click to expand...
Click to collapse
where ? no link
Well, I was going to write and tell people I can't get the OTA update and also seem to be unable to reinstall the stock apps so it will pick up the OTA update (rooted with 10g from another user), but....NEVER MIND! Will try this method and see if it works.
One question - in the instructions it says delete 1.4. Ok, from the link page I get that, but curious....wouldn't installing 1.5 just erase and overwrite 1.4 anyway? Why the need to delete it, other than just having a clean install? Doesn't matter to me really, just curious.
did everything you said below and I got the MD5 mismatch! It aborted the JB update in CWM. . and suggestions?
csrow said:
If you are rooted in V10G with Tmobile P769, then you can bypass OTA and go straight to rooted V20D JB with CWM already installed.
Here is a copy of rooted CWM back up of P769 V20D
http://forum.xda-developers.com/showpost.php?p=40775018&postcount=772
The latest lock boot loader CWM (v1.5) for JB is here.
http://forum.xda-developers.com/showpost.php?p=36620368&postcount=1
1) First delete the version 1.4 CWM
2) Download and install version 1.5 CWM
3) If you have Titanium Back up, make a fresh back up.
4) Download and copy V20D back up folder to clockworkmod back up folder.
5) Reset and go into CWM.
6) set the back up format to 'tar'
7) run Back up to external SD. This will give you a latest back up of you V10G.
8) run Restore from external SD and find the V20 back up folder.
9) When the restore is finished, reboot.
You should be in a fresh rooted V20D JB. Now download Titanium Back up and restore your apps.
Enjoy.
__________. _________________________________________________________________________
Original old post : IGNORE
I am looking for a file which I think is needed for the JB update to occur for Tmobile 769.
The actual OTA ZIP file has been already posted but I am looking for the file
/sbin/recovery.
If you are rooted and have received "OTA is ready message", before you update your phone, please look for the above file and post it here for us.
TIA
Click to expand...
Click to collapse
Nathan.7118391 said:
did everything you said below and I got the MD5 mismatch! It aborted the JB update in CWM. . and suggestions?
Click to expand...
Click to collapse
I've had this happen on my nexus 7 before. Redownload the file and copy it over again. Something got fudged up while moving it around.
---------- Post added at 10:40 PM ---------- Previous post was at 10:39 PM ----------
Prof24 said:
Well, I was going to write and tell people I can't get the OTA update and also seem to be unable to reinstall the stock apps so it will pick up the OTA update (rooted with 10g from another user), but....NEVER MIND! Will try this method and see if it works.
One question - in the instructions it says delete 1.4. Ok, from the link page I get that, but curious....wouldn't installing 1.5 just erase and overwrite 1.4 anyway? Why the need to delete it, other than just having a clean install? Doesn't matter to me really, just curious.
Click to expand...
Click to collapse
Im pretty sure installing 1.5 over 1.4 is totally fine(I did). Never hurts to be too safe though.
1) You may be able to just install V1.5 on top of V1.4. I don't know. It's just two deletes and one rename to get rid of V1.4.
2) If you are getting MD5 mismatch, make sure you do not rename the file directory. Try downloading again and you can also check using an external MD5 checker app.
Does this flash the radios too? Those are also needed.
Everything seems to work fine without flashing baseband.
Sent from my LG-P769 using xda premium
kevev said:
Does this flash the radios too? Those are also needed.
Click to expand...
Click to collapse
Yes, the radio seems fine. It looks like the 4 radio fls files were patched during the update. Actually, the signal level has improved around -5 dB. Just make sure you turn off the wi-fi calling option from the set up.
If you leave the option on, it will keep on try to turn off the radio.
P.S. - Anyone know how to get rid of Quick slide apps on the notification area?
So are we saying this CWM zip does not flash the radios?
It would be good to flash the new radios. It may help with cell reception.
More bars does not mean better reception if you have not flashed the radios. It just means that the new software is not reading what it is expecting from radio.
Will this work for rooted 10e as well?
csrow said:
Yes, the radio seems fine. It looks like the 4 radio fls files were patched during the update. Actually, the signal level has improved around -5 dB. Just make sure you turn off the wi-fi calling option from the set up.
If you leave the option on, it will keep on try to turn off the radio.
P.S. - Anyone know how to get rid of Quick slide apps on the notification area?
Click to expand...
Click to collapse
Is there an issue with the Wi-Fi calling option on JB? I use it in my house due to bad reception, will updating cause issues? Anyone know? Thanks!
FoxHound Ground Zeroes v1.0 for Verizon S4 - NCx (NC2 / NC5 +) based off of Foxhound 4.7 International
HELLO FELLOW ROM LOVERS,
Here is another present from me... I present to you the first NC2 / NC5 Custom Rom built on and for the new Verizon 4.4.2 updates. This was tested on both but primarily NC2 and my upgrading methods were used and worked the best.
Kids dont flash ROMs without your parents consent. People don't hold the handicapped dude hostage if this messes up your phone. ITs been tested up and down but some ppl got bad luck... so don't hold me or XDA or anyone that flashes or developers or Verizon responsible for anything bad that happens to your phone from here out.... ok u can try to hold verizon its kinda their fault anyway.
LINK TO ORIGINAL ROM THREAD (Screenshots and descriptions for now until I have time to update this OP)
How to Install:
0. If you have 4.4.2 and Safestrap already installed just flash the ROM and SuperSu and RESET BAM YOUR DONE. Otherwise Follow bellow guide!!!
1. Download the ROM along with these files: SuperSu1.94, gogOdin3.10(the newest Odin brought to u by mua 1st, QuickUpgrade NC2 Safestrap (or other custom recovery) flashable file, NC2 WiFi Fix (only flash if broken wifi in ROM),NC2 Boot.img Only.tar Odin Flashable and pickup and install Safestrap 3.72 found in AT&T S4 thread.
2. Install your version of the ROM in Safestrap 3.72 under the Stock slot. This is a dirty Flash (no wipe) so you may need to wipe the System 1st. After installing the ROM flash the NC2 QuickUpgrade then the NC2 WiFi Fix the SuperSu194 zip then (you can link the installs together so SS flashes all 4 at once.) Now instead of normal resetting go to "Reboot" under main menu of Safestrap. Choose Download Mode (or just restart and hold Vol-Down) when your into Download mode plug phone into the Computer and load up Odin 3.10 and insert the NC2 Boot img.tar into the AP slot and press Start.
3. Phone will restart, give it a minute or two if you don't hear music its not working perfectly. In this situation you'll need to download: NC2 Hlos/Modem and this NC2 Full Upgrade no Bootloaders.tar (both are flashable only in Odin 3.10) now restart phone to download mode again and flash these with the Full Upgrade in the AP slot and the hlos in the CP and press start. Phone will start once before entering Recovery automatically, don't panic completely normal its flashing the cache update now... Phone will restart automatically and now if you don't see the bootanimation or hear music you either need to start completely over. Sorry about the music if its not your personal preference I've got a tool that will easily modify bootanimations and music (along with a lot more) in the next week or so. Just putting on finishing touches to final version 1.0. I've probably flashed 30 ROMS this way and still have my KNOX intact and the same bootloaders I started with. So no worries about voiding warranty by triggering KNOX cause U WONT if DONE RIGHT!!!
4. Vote 5 Stars, Donate, Thank in person or give a +1 if you enjoy the ROM!!!
5. FLASH EITHER THE KEYGUARD REMOVAL.ZIP IN SAFESTRAP OR THE KEYGUARD FIX.ZIP PLEASE! NEW VERSION WILL COME +1s pleas continue to post bugs or issues.
Thanks,
gogolie / gigilie
v1
PS This ROM has my added Theme's pack that ill be releasing shortly to change the theme from settings on home Launcher3 choose Themes and wala.... something like 10 at least to choose from. I know right, your welcome
As a precautionary measure after installing thru safestrap or custom recovery before restarting the ROM flash SuperSu and then go into your system / priv-app / directory and find the file KeyGuard.apk and delete it... i'll be releasing an updated version soon
this is for my...........................
What about for MDK users?
ahoslc said:
What about for MDK users?
Click to expand...
Click to collapse
If you're on MDK you should be able to install this like any other ROM but I would wait for conformation from OP first.
Sent from my SCH-I545 using XDA Free mobile app
i installed this and got a Keyguard FC, wont let me do anything...
Rom should be flashed on Stock or any slot?
You had me at THE ROM U DREAMT ABOUT LASTNITE <3
jcs33 said:
i installed this and got a Keyguard FC, wont let me do anything...
Click to expand...
Click to collapse
I need more info than that bro. was it a clean install (wiped/formated first?) and was it on safestrap or mdk? sounds like possibly u had a rom underneath this install but i dont know as i havent heard from any other users. it works fine for me tho... keyguard was one of the first things i had to replace with the verizon one in order to port it.... no worries tho i can do a patch if thats an issue
I did a clean install, wiped everything except SD and installed everything just like you said using safestrap 3.72.(i wiped data but did not format data) It boots up good but Gives the keyguard FC persistently..
gigilie said:
I need more info than that bro. was it a clean install (wiped/formated first?) and was it on safestrap or mdk? sounds like possibly u had a rom underneath this install but i dont know as i havent heard from any other users. it works fine for me tho... keyguard was one of the first things i had to replace with the verizon one in order to port it.... no worries tho i can do a patch if thats an issue
Click to expand...
Click to collapse
Man! NC5 Stock Rooted (Surges method), Stock or new slot??? Instructions have confused me.
Pretty sure u cant install to slots on 3.72 on vzn. Only stock.
Sent from my SCH-I545 using XDA Free mobile app
---------- Post added at 05:52 AM ---------- Previous post was at 05:48 AM ----------
2. Install your version of the ROM in Safestrap 3.72 under the Stock slot.
Click to expand...
Click to collapse
Sent from my SCH-I545 using XDA Free mobile app
Can't get past the FoxHound boot animation. Got the music too, but it just goes round and round after that.
jcs33 said:
I did a clean install, wiped everything except SD and installed everything just like you said using safestrap 3.72.(i wiped data but did not format data) It boots up good but Gives the keyguard FC persistently..
Click to expand...
Click to collapse
ok for the time being until i get a fix up... easiest way to quick patch yourself would be restart to safestrap then enter advanced (first make sure system is mounted under mounts) then file explorer and then /system/priv-app/ find keyguard.apk and delete it. this rom comes with its own keyguard so this wont affect the experience or ROM itself. sorry for the trouble thanks for spotting the bug sucks on my phone I had it working with my own version of S5's Particle Effect on that keyguard.... next release. u guys check out all the themes yet?
TW - Main Menu - Themes choose theme. i included a but load of new themes lemme know how they work
Dont flash to anything but stock slot. safestrap doesnt support slots on 4.4.2 yet.
joshnat said:
Can't get past the FoxHound boot animation. Got the music too, but it just goes round and round after that.
Click to expand...
Click to collapse
make sure your flashing on a clean system.... or flash over official NC2 or NC5 rom. then upgrade using my methods. use an odin all in one pack for NC2 or NC5 (my vote is NC2 its betr)
judging by your boot symptoms i'm hoping thats what it is maybe a cache flash would fix it too.
op updated
put those keyguard fixes online one will remove it the other will remove it and install a different one.. lemme know
gigilie said:
ok for the time being until i get a fix up... easiest way to quick patch yourself would be restart to safestrap then enter advanced (first make sure system is mounted under mounts) then file explorer and then /system/priv-app/ find keyguard.apk and delete it. this rom comes with its own keyguard so this wont affect the experience or ROM itself. sorry for the trouble thanks for spotting the bug sucks on my phone I had it working with my own version of S5's Particle Effect on that keyguard.... next release. u guys check out all the themes yet?
TW - Main Menu - Themes choose theme. i included a but load of new themes lemme know how they work
Dont flash to anything but stock slot. safestrap doesnt support slots on 4.4.2 yet.
Click to expand...
Click to collapse
I did exactly this, I was stoked too because this seems like a sweeeeeeet rom. After reboot I got an even quicker, constant "System UI FC"
---------- Post added at 11:02 AM ---------- Previous post was at 10:54 AM ----------
gigilie said:
put those keyguard fixes online one will remove it the other will remove it and install a different one.. lemme know
Click to expand...
Click to collapse
Thanks much for the fixes, even though Ive spent hours trying... haha jk mang I really do appreciate ya.
But the link for keyguard removal needs to be updated
gigilie said:
put those keyguard fixes online one will remove it the other will remove it and install a different one.. lemme know
Click to expand...
Click to collapse
Neither of them work... Still just the same fc... I unzipped another rom and replaced the apk in ss file manager... same problem
Installed on NC5 Stock...after 12 hours still slow and warming the phone, Wifi is not working, battery drain very fast...speed is a pain...otherwise the rom looks pretty good with great features
Zooandbio4me said:
Neither of them work... Still just the same fc... I unzipped another rom and replaced the apk in ss file manager... same problem
Click to expand...
Click to collapse
I did a full wipe, redownloaded both fixes, tried again in several combinations, chmod'ing, etc etc etc. to no avail.... love you ya giglie mothafu**** please help
Also unable to uninstall bloatware and pre installed apps. Please help
HELP!!!HELP!!!HELP!!!
Below is my phone information:
Android Version : 4.2.2
Baseband Version : I9205XXUCNA3
I followed the steps to root my phone.
1. I flash vcoreroot-v2.tar via Odin. After flash, I open SuperSU i know that my phone get root access.
2. But, I notice that my WIFI could not open and all my file in internal memory was missing.
3. The thread I view says that I have to flash the stock kernel to my phone.
4. After I flash, my phone back to normal (WIFI can use and internal memory have data) but there have no root acces in my phone.
I have try another ways to root my phone that is using Recovery Mode to install the UPDATE-SuperSU-v1.34.zip. It doesn't work also.
Any steps i have missed up while rooting?????
Let's flash MegaFireV10 and you will have very fast system already rooted. If you wish, you can flash MFv10X which is heavy debloated version of MegaFire
Yep. Same problem for me when I try to root via vcoreroot. No wifi after root. I just wasted my time rooting and got 0x1 knox in the end. Great job, Samsung.
Anyway, there's two red lines upon booting up with root.
Now I'm just waiting for kitkat 4.4.2 first before rooting. Waste of time.
trurl3 said:
Let's flash MegaFireV10 and you will have very fast system already rooted. If you wish, you can flash MFv10X which is heavy debloated version of MegaFire
Click to expand...
Click to collapse
Any thread describe about MegaFireV10 ? Can u provide the link for me ? I have to take a look first. Thx...
lai0715 said:
Any thread describe about MegaFireV10 ? Can u provide the link for me ? I have to take a look first. Thx...
Click to expand...
Click to collapse
Here you are
http://forum.xda-developers.com/showthread.php?t=2608110
I have the same problem, but at this point i just want to back up apps and files using titanium.
I really dont want to go through flashing stock roms due to the extremely slow download, if i flash Megafire without wiping will i be able to get back my wifi and internal sdcard?
san_099 said:
I have the same problem, but at this point i just want to back up apps and files using titanium.
I really dont want to go through flashing stock roms due to the extremely slow download, if i flash Megafire without wiping will i be able to get back my wifi and internal sdcard?
Click to expand...
Click to collapse
MegaFire Should'nt be flashed without factory reset. So back up your apps, contacts, sms's and whats more and make clean install. I would suggest to use for backup Super Backup app from Store.
trurl3 said:
MegaFire Should'nt be flashed without factory reset. So back up your apps, contacts, sms's and whats more and make clean install. I would suggest to use for backup Super Backup app from Store.
Click to expand...
Click to collapse
You are right if I wanted to stay on Megafire, but my concern was to get wifi and sdcard working again,I flashed without any wiping and it worked. yes there was FC every 2 minutes, but I managed to temporary fix the issue and move on to the next custom ROM.
Thanks anyways!!
trurl3 said:
Here you are
http://forum.xda-developers.com/showthread.php?t=2608110
Click to expand...
Click to collapse
Oh yeah...Thank u for reply my thread and suggest the ROM for me...now i got rooted for my phone already...Thank You!:victory::victory::victory:
Redlines-No wifi-No internal SD
lai0715 said:
HELP!!!HELP!!!HELP!!!
Below is my phone information:
Android Version : 4.2.2
Baseband Version : I9205XXUCNA3
I followed the steps to root my phone.
1. I flash vcoreroot-v2.tar via Odin. After flash, I open SuperSU i know that my phone get root access.
2. But, I notice that my WIFI could not open and all my file in internal memory was missing.
3. The thread I view says that I have to flash the stock kernel to my phone.
4. After I flash, my phone back to normal (WIFI can use and internal memory have data) but there have no root acces in my phone.
I have try another ways to root my phone that is using Recovery Mode to install the UPDATE-SuperSU-v1.34.zip. It doesn't work also.
Any steps i have missed up while rooting?????
Click to expand...
Click to collapse
hi buddy..care to share the Stock Kernel u used? i keep looking for the kernel but can't find it.i faced the same problem with u..no wifi,no internal sd card..really hope u can help..TQ
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is also available.
NOTE: if you flash the deodexed version and have problems with root, flash UPDATE-SuperSU-v2.02.zip from here. I don't anticipate any root problems, but just in case, this will fix it.
100% stock: STOCK-4.4.2-P5200(fixed).zip
Deodexed + rooted: STOCK-DEODEXED-ROOTED-4.4.2-P5200(fixed).zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is in the works. Bear with me.
100% stock: STOCK-4.4.2-P5200.zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Click to expand...
Click to collapse
Very good work done by you! Yesterday I spent hours to unzip the file but unsuccessfully. I will try it right now! Thanks a lot!
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is in the works. Bear with me.
100% stock: STOCK-4.4.2-P5200.zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Click to expand...
Click to collapse
I tried but it doesn't flash. Received "failed" message. I am using the latest TWRP by angel666. Any idea what I am doing wrong?
edsoedso said:
I tried but it doesn't flash. Received "failed" message. I am using the latest TWRP by angel666. Any idea what I am doing wrong?
Click to expand...
Click to collapse
I've got the same problem.
Hold on, I'm working on it
@edsoedso
@Max4000
I think I've fixed it. Reuploading now. Bear with me.
The problem was a fairly stupid one. I edited the assert to fit P5200 instead of P5210 (I'm using the same updater-script I used for the wifi model stock kitkat).
Problem is, I used mac textedit instead of gedit. One preserves linux encoding, the other does not. Can you guess which is which?
I believe it was Homer Simpson who said, "DOH".
Anyway, edited the updater-script with gedit and just removed the assert completely, so once it's done uploading you should be able to flash without issue.
Restl3ss said:
@edsoedso
@Max4000
I think I've fixed it. Reuploading now. Bear with me.
The problem was a fairly stupid one. I edited the assert to fit P5200 instead of P5210 (I'm using the same updater-script I used for the wifi model stock kitkat).
Problem is, I used mac textedit instead of gedit. One preserves linux encoding, the other does not. Can you guess which is which?
I believe it was Homer Simpson who said, "DOH".
Anyway, edited the updater-script with gedit and just removed the assert completely, so once it's done uploading you should be able to flash without issue.
Click to expand...
Click to collapse
Do not worry, I installed stock 4.4.2 using odin, than TWRP and superuser. It looks great! Please work on 4.4.2 Pimpdroid and let us known the results. Regards!
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
just uploaded a deodexed + rooted build. If you have any troubles with root flash SuperSU from the link in OP.
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
khaledreno said:
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
Click to expand...
Click to collapse
I always do a factory reset, format data, and full wipe with any ROM Can you move your files to your PC via USB cable?
khaledreno said:
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
Click to expand...
Click to collapse
I flashed without wiping and had big problems. You should really do a full wipe.
Restl3ss said:
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
Click to expand...
Click to collapse
I just saw your note. I am downloading both versions, flash them and let you know.
i have downloaded both versions but instal failed
any way does any one know which site i can download the MD5 of the software without corruption ?
Restl3ss said:
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
Click to expand...
Click to collapse
@Restl3ss:
I flashed both versions using TWRP 2.6.3.0 and everything went well. The first unrooted rom after completing flashing offered to install superuser and I did it. The second rom version did not offered it so I rebooted to TWRP and installed superuser from sd card. I am keeping the second version on my tablet. Looks nice and works very well. I will remove some system apps that I do not use and free some additional memory.
It seems that battery is draining faster than 4.2.2. Does anybody note it? Any solution? Thank you!
I have tried the rootet and fixed version, , but it doesn´t work, it hangs on boot!
Installed with TWRP 2.7.1.0, may i have to install this ROM with Odin ?
jamalau said:
I have tried the rootet and fixed version, , but it doesn´t work, it hangs on boot!
Installed with TWRP 2.7.1.0, may i have to install this ROM with Odin ?
Click to expand...
Click to collapse
hey man you need to wipe system, data,cache and dalvik-cache
then flash the zip and it should work
edsoedso said:
@Restl3ss:
I flashed both versions using TWRP 2.6.3.0 and everything went well. The first unrooted rom after completing flashing offered to install superuser and I did it. The second rom version did not offered it so I rebooted to TWRP and installed superuser from sd card. I am keeping the second version on my tablet. Looks nice and works very well. I will remove some system apps that I do not use and free some additional memory.
Click to expand...
Click to collapse
Is there an update zip for recovery? I have 2.6.1 twrp and get error message during install. Can i update to latest twrp or philz by Flash, or do i have to connect the tab to PC, and need to do the beginners Steps?
Thanks for advices
Aaah, i got it... A flashable philz for p5200...
quitschibu84 said:
Is there an update zip for recovery? I have 2.6.1 twrp and get error message during install. Can i update to latest twrp or philz by Flash, or do i have to connect the tab to PC, and need to do the beginners Steps?
Thanks for advices
Aaah, i got it... A flashable philz for p5200...
Click to expand...
Click to collapse
Can you post the link for the Philz 5200 recovery?
thks
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
https://drive.google.com/open?id=1xTtsn6gcg4JEX2dYKPiXTWVhPiGPzIBn
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://androidfilehost.com/?fid=889964283620771190
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
UPDATE! New build has been released. It is CQL7. To get to that, flash BQK2 with Odin (linked above) then OTA from BQK2 to BQL5 then another OTA from BQL5 to CQL7.
BQK2 to BQL5: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-S2BQL5-UP
BQL5 to CQLB: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQL5-to-U2CQLB-UP
BRA8 to CRB8 https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS3BRA8-to-U3CRB8-UP
THIS WILL UPDATE YOUR BOOTLOADER TO V3, YOU CAN NOT DOWNGRADE
BQL5 Odin: https://samsung-firmware.org/download/Galaxy__Note8__/c7o0/VZW/N950USQS2BQL5/N950UOYN2BQL5/
Oh just a side note, this may be unstable and crash, you have been warned.
This is a discord server with things as they come out. discord.gg/4uxusu8
thanks to thesbros for making the website
(https://i.imgur.com/oBT3bTA.jpg)
(https://i.imgur.com/f8CU1IP.jpg)
mweinbach said:
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
I currently have an S8 on the Oreo beta and will be buying a Note8 this weekend because of this. I AM SO EXCITED!
Oh just a side note, this may be unstable and crash, you have been warned.
Click to expand...
Click to collapse
How does one go about flashing this? I'm currently on Sprints latest update
mweinbach said:
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
I currently have an S8 on the Oreo beta and will be buying a Note8 this weekend because of this. I AM SO EXCITED!
Oh just a side note, this may be unstable and crash, you have been warned.
Click to expand...
Click to collapse
And again thanks to ..... lol
This is the unlocked version ???
Sent from my SM-N950U1 using Tapatalk
Del
powerstroke said:
How does one go about flashing this? I'm currently on Sprints latest update
Click to expand...
Click to collapse
1. Download Odin and flash this https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
1.5 In CSC use HOME_CSC to keep data, normal to wipe
2. Download this file: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
3. If you have an SD card, transfer that to your Sd carz
4. Boot into recovery
5.SD: select update from sd card then select your OTA called update.zip
5.ADB: on your phone select sideload over adb then type adb sideload update.zip (replace that update.zip with full file directory)
nexus6r3plicant01 said:
This is the unlocked version ???
Sent from my SM-N950U1 using Tapatalk
Click to expand...
Click to collapse
N950U, so kinda but no, not really. If you set your CSC to A then yah, if not it has carrier bloat.
mweinbach said:
1. Download Odin and flash this https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
1.5 In CSC use HOME_CSC to keep data, normal to wipe
2. Download this file: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
3. If you have an SD card, transfer that to your Sd carz
4. Boot into recovery
5.SD: select update from sd card then select your OTA called update.zip
5.ADB: on your phone select sideload over adb then type adb sideload update.zip (replace that update.zip with full file directory)
Click to expand...
Click to collapse
I'm already on sprints latest. That ok or do I need to downgrade before doing update.zip in recovery? Any mirrors for U2CQL1? Every time I try to download, it fails
powerstroke said:
I'm already on sprints latest. That ok or do I need to downgrade before doing update.zip in recovery? Any mirrors for U2CQL1? Every time I try to download, it fails
Click to expand...
Click to collapse
You need to be on BQK2 as linked in OP
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
jaceypoo said:
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
Click to expand...
Click to collapse
Uploading a mirror as i type this.
jaceypoo said:
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
Click to expand...
Click to collapse
I seriously just got to about 750 mb downloaded of the file and it just stops and starts over. Can't get it downloaded? What the heck lol
I was at 12 percent and the same thing happened to me lol. I'll just wait for the mirror.
Somehow, after 4 attempts at downloading, it worked and only took ~5 mins. everything appears to be in the zip file. I loaded the BK2 file (never got cell signal, and had a lot of strange things in settings) and am applying the update now. Hopefully this doesn't screw up anything. with the BK2 my settings showed custom for the status though, so not sure if I just screwed myself out of Knox stuff.
---------- Post added at 10:14 PM ---------- Previous post was at 09:35 PM ----------
Looks like it's working, some things I noted:
I had a few strange apps in my service folder (BoA and some games)
Samsung connect was causing a bunch of force closures.
Even though I was on unlocked before this, I ended up on Verizon (my carrier).
Everything else seems normal, and had I done a wipe I'd probably be in even better shape. Might to a whole tomorrow.
Sent from my SM-N950U using Tapatalk
damn, this was sniffed out from the AT&T servers?
_Dennis_ said:
Somehow, after 4 attempts at downloading, it worked and only took ~5 mins. everything appears to be in the zip file. I loaded the BK2 file (never got cell signal, and had a lot of strange things in settings) and am applying the update now. Hopefully this doesn't screw up anything. with the BK2 my settings showed custom for the status though, so not sure if I just screwed myself out of Knox stuff.
---------- Post added at 10:14 PM ---------- Previous post was at 09:35 PM ----------
Looks like it's working, some things I noted:
I had a few strange apps in my service folder (BoA and some games)
Samsung connect was causing a bunch of force closures.
Even though I was on unlocked before this, I ended up on Verizon (my carrier).
Everything else seems normal, and had I done a wipe I'd probably be in even better shape. Might to a whole tomorrow.
Click to expand...
Click to collapse
Can u post some screenshots? Anything new in settings or design?
note3userr said:
Can u post some screenshots? Anything new in settings or design?
Click to expand...
Click to collapse
Settings is new some screen shots of it here
https://www.imgur.com/a/c0MJ2
Sent from my SM-N950U using Tapatalk
where is the odin for this? The link does not have Odin
technicalvampire said:
where is the odin for this? The link does not have Odin
Click to expand...
Click to collapse
Don't need odin for this, it's an OTA.
Just put it on your phone, and go to recovery mode and flash from update.zip or whatever.
Longcat14 said:
Don't need odin for this, it's an OTA.
Just put it on your phone, and go to recovery mode and flash from update.zip or whatever.
Click to expand...
Click to collapse
First part does...