#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Click to expand...
Click to collapse
CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.
What's working:
Booted :silly:
What's not working:
Everything
Installation Instructions:
Use Any Recovery Like Cwm/Twrp which is mentioned in thread
Download the CM11 zip and put in phone.
Reboot to recovery.
Wipe data/factory reset.
Wipe cache.
Install the CM11 zip.
(Optional)Flash Gapps (find it in downloads section).
Reboot.
Downloads:
CyanogenMod 11
Gapps
Source:
Teambutter
Credits:
@corphish - For Teaching Me About Linux And Rom Development.
@andii_nr - For Helping Me.
@DigiGoon - For his highly compressed CM11 sources.
Give gapps pls
Ohh i forget about that
Link updated
Sent from my SM-G360H using XDA-Developers mobile app
@Dreamstar
I got this error when install in twrp
The process ended with error : 6
And in CWM (status 6 error)
How can i fix it?
Sent from my SM-G360H using XDA Free mobile app
Well try this updater script as you say you get status 6 error
http://d-h.st/NGCf
Sent from my SM-G360H using XDA-Developers mobile app
dont work
installed but not loaded
no me sirvio, sale error al instalarla
Downloading
Question why to wipe the data it's the same Android version (4.4.4) or what !!
I have 6 error and what to do with the script?
Tried the updater-script and stuck at samsung logo.
is there any bug?
stuck at samsung logo again.
I cant install it via TWRP recovery, it has an error that says binary has failed.
Michael Bishop said:
Give gapps pls
Click to expand...
Click to collapse
Is it correctly installed on your phone?
ERROR AFTER INSTALLATION CM11
Remove IMEI. As Lost ? HELP!
Finally, @Dreamstar, first booted custom ROM for G360H.
Suggestion: Post screenshots (not pics) in the original thread post, so new-comers would believe it's for real.
---------- Post added at 05:32 PM ---------- Previous post was at 05:26 PM ----------
romgharti said:
is there any bug?
Click to expand...
Click to collapse
There are a LOT of bugs.
@AtomR
Does cm booted with you??
@Dreamstar
first stuck on sam logo
Then after replace updater-script stuck on cm boot animation for 20 minutes and did not enter phone?
Sent from my SM-G360H using XDA Free mobile app
---------- Post added at 01:20 PM ---------- Previous post was at 01:19 PM ----------
demchenko said:
ERROR AFTER INSTALLATION CM11
Remove IMEI. As Lost ? HELP!
Click to expand...
Click to collapse
Does cm boot with you? How??
Sent from my SM-G360H using XDA Free mobile app
good job my friend
Is there anyone test the cm and booted with him??
tell me
Becauae it not working with me
Sent from my SM-G360H using XDA Free mobile app
adamh.ayyad said:
Is there anyone test the cm and booted with him??
tell me
Sent from my SM-G360H using XDA Free mobile app
Click to expand...
Click to collapse
Mines didn't. I Change the updater-script with winrar and stuck at samsung logo.
Related
Warning:
I have no GT-N7105,so I don't test it. You should backup your phone!
What's Working:
- Touchscreen and hardware keys
- Touch key lights
- LTE (Dial *#*#4636#*#* phone information scroll up select LTE/CDMA)
- 3G
- SMS
- MMS
- Calls
- Wifi
- Sound
- Cameras
- Internal / external storage
- GPS
- Wifi Hotspot
- Bluetooth
- Recorder
- Torch
- NFC
Installation:
- Download ROM kernel and gapps
- Place on SDCARD
- Wipe factory rest 2x
- Flash MIUI rom
- Reboot into rom
- Then Reboot into recovery
- Flash gapps
- Reboot
- Enjoy
Support language list:
English(iBotPeaches)
Polish(Acid-miuipolskapl)
Slovak(MIUICzech-Slovak)
Czech(MIUICzech-Slovak)
French(ingbrzy)
Hungaria(vagyula1)
Danish(1982Strand)
Holland(Redmaner)
German(Bitti09)
Spain(ingbrzy)
Italy(Mish)
Arabic(MIUI-Palestine)
Norway(ingbrzy)
JUden(HebMIUI)
Vietnam(HoangTuBot)
Indonesia(ingbrzy)
Turkish(ingbrzy)
Thai(rcset)
Russian(miuisu)
Ukrainian(KDGDev)
Swedish(ingbrzy)
Dutch(Redmaner)
Brazilian(ingbrzy)
Korean(nosoy1)
Romanian(ingbrzy)
Japanese(ingbrzy)
Portugal(miuiportugal)
Changelog:
Click me!
DOWNLOAD LINK:
Choose exy-*.zip in the folder
(choose n7105 in the aroma,All ROM & OTA will find in this folder)
Gapps: goo.im
Old version:
4.4.25
4.4.18
4.4.10
4.4.3
4.3.28
4.3.23
4.3.21
4.3.15
4.3.8
4.1.24
4.1.17
3.10.01
3.9.1
3.8.23
3.8.16
My Blog:
www.nianrom.com
Credits:
CyanogenMod
Psndna88
Mdiary
MIUI Official Team
All translator I list
MIUI Port Team
Thank you! Will test!
Oh wow, love MIUI! Do custom kernels work? will flash a report later
Thanks!
Doesn't flash for me.
TWRP says "Error flashing zip 'external_sdcard/download/miui.............'
Then updating partition tables...
Tried redownloading the file just to be sure.
Can i flash a language file for this Rom ?
I search for a german file.....
Status 7 error
Sent from my N7105 using xda app-developers app
Also figured id add it removes my root as TWRP reapplied root before I restarted.
Sent from my SGH-T889 using XDA Premium 4 mobile app
amazing rom working great so far
thanks for porting miui for n7105
onkeltoby said:
Can i flash a language file for this Rom ?
I search for a german file.....
Click to expand...
Click to collapse
it has to be ported as well,
the miui language packs are also device based, they have the n7100 listed on miuiandroid (note 2 t03g), but for the 7105 they haven't gotten a release, instead we are dependant off ports made by wonderfull users like jing
flashing a language pack from a different device will mess up the miui installation so unless jing decides to port the language pack your stuck with the default languages
Error 7 as well.. flashing over twrp to see if itll flash using that
---------- Post added at 09:49 PM ---------- Previous post was at 09:40 PM ----------
Stll no go..
Code:
format() expects 3 args, got 5
^ thats what i get ^
---------- Post added at 09:50 PM ---------- Previous post was at 09:49 PM ----------
YamazakiRobert said:
amazing rom working great so far
thanks for porting miui for n7105
Click to expand...
Click to collapse
Howd you get it to flash over?
I also have a issue with bad zip error (philz recovery)
Sent from my GT-N7105 using XDA Premium 4 mobile app
BBCHAMPs said:
Error 7 as well.. flashing over twrp to see if itll flash using that
---------- Post added at 09:49 PM ---------- Previous post was at 09:40 PM ----------
Stll no go..
Code:
format() expects 3 args, got 5
^ thats what i get ^
---------- Post added at 09:50 PM ---------- Previous post was at 09:49 PM ----------
Howd you get it to flash over?
Click to expand...
Click to collapse
i have modded the updater-script
YamazakiRobert said:
i have modded the updater-script
Click to expand...
Click to collapse
So flash the script then the ROM?
Sent from my GT-N7105 using xda app-developers app
mykalbrock said:
So flash the script then the ROM?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
No you actually replace the updater-script file in the zip. Its under folder: META-INF/com/google/android.
Trying it now so I will post back.
Sent from my GT-N7105 using XDA Premium 4 mobile app
---------- Post added at 05:43 PM ---------- Previous post was at 05:33 PM ----------
YamazakiRobert said:
i have modded the updater-script
Click to expand...
Click to collapse
FATKMZ said:
No you actually replace the updater-script file in the zip. Its under folder: META-INF/com/google/android.
Trying it now so I will post back.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Didnt flash on mine. Same problem you had on page 1
Same here it just fails..it looks like it's going to install then nope it doesn't it fails
FATKMZ said:
No you actually replace the updater-script file in the zip. Its under folder: META-INF/com/google/android.
Trying it now so I will post back.
Sent from my GT-N7105 using XDA Premium 4 mobile app
---------- Post added at 05:43 PM ---------- Previous post was at 05:33 PM ----------
Didnt flash on mine. Same problem you had on page 1
Click to expand...
Click to collapse
please try again without the cert on meta-inf
YamazakiRobert said:
please try again without the cert on meta-inf
Click to expand...
Click to collapse
Testing now. Will report back
Still error 7.. :/
BBCHAMPs said:
Testing now. Will report back
Still error 7.. :/
Click to expand...
Click to collapse
Yep same error as first page still.
Thanks for trying
Any other ideas? Haha.
Sent from my GT-N7105 using XDA Premium 4 mobile app
BBCHAMPs said:
Testing now. Will report back
Still error 7.. :/
Click to expand...
Click to collapse
FATKMZ said:
Yep same error as first page still.
Thanks for trying
Any other ideas? Haha.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
can anyone post me the recovery log
im tring to upload the full zip im using but my connection is terrible
I replaced both install and binary scripts with T Mobile Note 2 MIUI ones and I was able to flash it to Note without any issue. I also replaced the kernel with T Mobile. The only issue I see is both internal and external SD cards recognized by the PC when I connect through USB cable but I do not see any internal or external folders data.
ClockworkMod Recovery is a simple and straightforward custom recovery designed by Koush and maintained by the CyanogenMod team as a whole.
Please note, you must have already unlocked your bootloader through freegee or teenybin for this to work.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Install Through Fastboot:
Download the ClockworkMod Recovery image: Dev-Host
Install the android sdk
Reboot the device into bootloader mode:
Code:
adb reboot bootloader
Flash the recovery with fastboot:
Code:
fastboot flash recovery CWM-6.0.3.8-e970.img
Reboot the device
You have successfully installed ClockworkMod Recovery, happy flashing!
Install Through Custom Recovery:
Download the ClockworkMod Recovery zip: Dev-Host
Place the zip file on the device's storage
Reboot into recovery
Select the install option and select the zip you placed on the device
Confirm and reboot the device
You have successfully installed ClockworkMod Recovery, happy flashing!
CWM vs TWRP:
Personally, this is completely a matter of preference. I've simply always preferred CWM to TWRP so I decided to make an updated version for myself and am sharing it with anyone else who is interested in CWM. You are always capable of switching to TWRP if you find this does not suit your needs.
About this version:
This was built and tested on September 25, 2013 from the latest available code from the CyanogenMod github. Based on the official CM repositories for e970, ls970-common, gproj kernel and CWM. All submitted changes have been merged and are now officially part of the the repositories.
Known issues:
After backup and restore, sometimes the battery display resets to 1% (this appears to be purely cosmetic and it does not actually zap the battery dry)
Choosing install zip from sdcard defaults to /storage/emulated instead of /storage/emulated/0 (I have been informed this is "by design" but I do find it mildly inconvenient)
Font is really small Fixed in 6.0.3.8
Thanks for the new build is there a touch version of 6.0.3.7
Sent from my LG Optimus G using xda app-developers app
I installed it and it works great but the font is really small
Sent from my LG Optimus G using XDA Premium 4 mobile app
iamtha1 said:
Thanks for the new build is there a touch version of 6.0.3.7
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
The official touch version of CWM is closed source, but once the gerrit change is merged it should be possible to build a touch version from koush's automated recovery builder that behaves identically.
cyberbandit1998 said:
I installed it and it works great but the font is really small
Sent from my LG Optimus G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
OP updated, this issue should now be fixed
Can't get it to download
Sent from my LG Optimus G using xda app-developers app
iamtha1 said:
Can't get it to download
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
seems to be an issue with dev-host, adding a temporary mirror from dropbox to OP
Kaik541 said:
seems to be an issue with dev-host, adding a temporary mirror from dropbox to OP
Click to expand...
Click to collapse
Is exfat support built in natively like our existing cwm?
Sent from my Optimus G using xda app-developers app
It should be if he's using the stock LG kernel.
Sent from my LG Optimus G using XDA Premium 4 mobile app
[r.]GimP said:
Is exfat support built in natively like our existing cwm?
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
DeathmonkeyGTX said:
It should be if he's using the stock LG kernel.
Sent from my LG Optimus G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not done anything specifically to add in exfat support and I have no exfat formatted devices with which to test it with, but it seems like exfat support in CM is already available through FUSE as well as specific commits for compatibility with CWM. On top of that the kernel seems to support fuse natively, but I don't claim to know anything about kernels so I could be misreading this. If someone could test with an exfat formatted device, I'd love to have a definite "yes" or "no" answer.
cyberbandit1998 said:
I installed it and it works great but the font is really small
Sent from my LG Optimus G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I installed this to my HTC One and was playing around. Apart from a normal backup I created an
image.zip, creating a zip file takes ages. Do I need this and where the hell is it? My memory has halved.
I found the files location thanks.
----------Optimus G ----------
ricequeen4u said:
I installed this to my HTC One and was playing around. Apart from a normal backup I created an
image.zip, creating a zip file takes ages. Do I need this and where the hell is it? My memory has halved.
Click to expand...
Click to collapse
HTC One? this is ----------Optimus G ----------
forum isn't it....?
hbawlz said:
----------Optimus G ----------
HTC One? this is ----------Optimus G ----------
forum isn't it....?
Click to expand...
Click to collapse
Soooory, my question was aimed at recovery,
CM11 M3
using CM11 on LGE970 since its release. yesterday, i flashed the latest snapshot M3 via rom's builtin "cm updater".
currently i am on cwm 6.0.4.5, which was installed via FreeGee when i unlocked my device. i need to know how cwm 6.0.3.8 is latest while the numbers suggest otherwise.
ROM Manager notifies me that 6.0.3.8 is latest available recovery. it would be very helpfull if someone can explain me the difference.
the reason for my curiosity is that in recent blog from CyanogenMod team, they mentioned the need of having the latest recovery for M3 to work fully.
i would also appreciate suggestion on which recovery to be used and how to ensure we get timely updates of recovery.
coming from twrp and i cant flash it!! i can select it, confirm flash, but then it just reboots into recovery again. help!!!!
ClockWorkMod Recovery 6.0.3.7
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Current build - untested
Download from DevDB
Installation :
Flash via odin - one package (.tar)
Sources :
Device Source
Recovery Source
Credits :
Koush
Cyanogenmod
XDA:DevDB Information
ClockWorkMod Recovery 6.0.3.7 , a Tool/Utility for the Samsung Galaxy Star
Contributors
ankur850
Version Information
Status: Testing
Created 2013-10-15
Last Updated 2013-10-15
Reserved
Why is there a thread without a download link. This isnt allowed in xda
Its Going To Be LEGEND--wait for it--DARY!- Barney Stinson(How I Met Your Mother)
Ironman38102 said:
Why is there a thread without a download link. This isnt allowed in xda
Its Going To Be LEGEND--wait for it--DARY!- Barney Stinson(How I Met Your Mother)
Click to expand...
Click to collapse
See the Download tab on top, and your message contains unneeded statements.
@ankur850 Thanks I was looking for the ums and lun file path. Do you happen to know the LPM path as well ?
Sent from my SCH-I500 using Tapatalk 4
ankur850 said:
ClockWorkMod Recovery 6.0.3.7
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Current build - untested
Download from DevDB
Installation :
Flash via odin - one package (.tar)
Sources :
Device Source
Recovery Source
Credits :
Koush
Cyanogenmod
XDA:DevDB Information
ClockWorkMod Recovery 6.0.3.7 , a Tool/Utility for the Samsung Galaxy Star
Contributors
ankur850
Version Information
Status: Testing
Created 2013-10-15
Last Updated 2013-10-15
Click to expand...
Click to collapse
NOT at all working bro...but great work...keep trying..better luck next time
sambathpkr said:
NOT at all working bro...but great work...keep trying..better luck next time
Click to expand...
Click to collapse
Gee guess I'll continue my work. I'm pretty close what did recovery do stay black?
Sent from my SCH-I500 using Tapatalk 4
Unjustified Dev said:
Gee guess I'll continue my work. I'm pretty close what did recovery do stay black?
Sent from my SCH-I500 using Tapatalk 4
Click to expand...
Click to collapse
Let me guess stuck in Samsung Galaxy star Gt-s5282 bootscreen.
Its Going To Be LEGEND--wait for it--DARY!- Barney Stinson(How I Met Your Mother)
sambathpkr said:
NOT at all working bro...but great work...keep trying..better luck next time
Click to expand...
Click to collapse
Here's a test recovery.img http://goo.im/devs/Unjust/mint/CWM Had a few probs at first , but I got it built. The kernel did compile from source as well with this recovery.
Sent from my SCH-I500 using Tapatalk 4
Unjustified Dev said:
Here's a test recovery.img http://goo.im/devs/Unjust/mint/CWM Had a few probs at first , but I got it built. The kernel did compile from source as well with this recovery.
Sent from my SCH-I500 using Tapatalk 4
Click to expand...
Click to collapse
Bro it is a .img file how can we flash it through odin....?
sambathpkr said:
Bro it is a .img file how can we flash it through odin....?
Click to expand...
Click to collapse
Lol sorry I use heimdall . I'll try to make it flash in Odin . I don't use windows much but heimdall is on windows too
Sent from my SCH-I500 using Tapatalk 4
Unjustified Dev said:
Lol sorry I use heimdall . I'll try to make it flash in Odin . I don't use windows much but heimdall is on windows too
Sent from my SCH-I500 using Tapatalk 4
Click to expand...
Click to collapse
You told that u have built a kernel too..upload that one ill test that..
sambathpkr said:
You told that u have built a kernel too..upload that one ill test that..
Click to expand...
Click to collapse
Its only used for recovery I can upload one this weekend with a few governors maybe some mali GPU patches
Sent from my SCH-I500 using Tapatalk 4
Unjustified Dev said:
Its only used for recovery I can upload one this weekend with a few governors maybe some mali GPU patches
Sent from my SCH-I500 using Tapatalk 4
Click to expand...
Click to collapse
Dude consider adding swap support for that kernel too...
sambathpkr said:
Dude consider adding swap support for that kernel too...
Click to expand...
Click to collapse
Unzip and flash through odin hopefully it works.
Also I am not a kernel dev I don't know how to do all of that
Unjustified Dev said:
Unzip and flash through odin hopefully it works.
Also I am not a kernel dev I don't know how to do all of that
Click to expand...
Click to collapse
Will report u soon
---------- Post added at 11:17 AM ---------- Previous post was at 10:56 AM ----------
Unjustified Dev said:
Unzip and flash through odin hopefully it works.
Also I am not a kernel dev I don't know how to do all of that
Click to expand...
Click to collapse
Dude odin says some error "Md5 hash error" Not at all flashing
sambathpkr said:
Will report u soon
---------- Post added at 11:17 AM ---------- Previous post was at 10:56 AM ----------
Dude odin says some error "Md5 hash error" Not at all flashing
Click to expand...
Click to collapse
Someone confirmed it not working already
Sent from my SCH-I500 using Tapatalk 4
Unjustified Dev said:
Someone confirmed it not working already
Sent from my SCH-I500 using Tapatalk 4
Click to expand...
Click to collapse
Keep on trying dude...
Beginning is always harder..
@Unjustified Dev I recommend u that make a tar of recovery.img using Linux. Md5 hash error is happening because the recovery is in zip format.
Its Going To Be LEGEND--wait for it--DARY!- Barney Stinson(How I Met Your Mother)
Ironman38102 said:
@Unjustified Dev I recommend u that make a tar of recovery.img using Linux. Md5 hash error is happening because the recovery is in zip format.
Its Going To Be LEGEND--wait for it--DARY!- Barney Stinson(How I Met Your Mother)
Click to expand...
Click to collapse
Here is the odin flashable file...
In the attachment.. :good:
Sorry my bad english,
For all devs and xda members i have big problem with my i9300, and i think i'm the only person who cannot use custom rom based on Marshmallow or Lollipop(except ArchiDroid n cm12.1-justarchi).
i'v tried many different L/M roms like cm,aicp,others without success but only @JustArchi build can boot to system though boot process(starting apps) is too long about 1 hour.
Different result with twrp 2.8.7.0 - 3.0.2.0 or PhilzTouch
1. cm-12, cm-12.1, temasek, RR-L, blisspop, aicp-L, RR-M, Bliss - M, temasek 13.0
- Wipe dalvik/system/cache/data/internal or dirty
- Flash rom and gapps(open or slim)
- With boeffla or not
- With supersu or not
- Wipe cache/dalvik or not
- Optimizing apps n starting apps
- Wait about 1 hour - Finishing boot
- Phone autoreboot n stuck in bootanimation
- Wipe cache/dalvik
- bootloop
2. Archidroid 3.1.5 n cm12.1-justarchi
- Wipe dalvik/system/cache/data/internal
- Flash rom NOR gapps(open or slim)
- Wipe cache/dalvik
- Optimizing apps n starting apps
- Wait about 1 hour
- Boot SUCCESSFULLY
- If restart must wait 1 hour to boot into system again.
3. cm 13 official n nameless M
- Wipe dalvik/system/cache/data/internal or dirty
- Flash rom and gapps(open or slim)
- With boeffla or not
- With supersu or not
- Wipe cache/dalvik or not
- Optimizing apps n starting apps
- Wait about 1 hour - Finishing boot
- SETUP WIZARD screen doesn't respond to touch (about 10 minutes.
- Autoreboot
- bootanimation about 1 hour
- again SETUP WIZARD hungs.
I tried to change value ro.adb.secure, ro.secure to 0 and add persist.sys.usb.config = mtp,adb into default.prop ramdisk boot.img/kernel cm13. And this is logcat
Code:
W/AudioSystem( xxx1): AudioPolicyService not published, waiting...
W/AudioSystem( xxx2): AudioPolicyService not published, waiting...
W/AudioSystem( xxx3): AudioPolicyService not published, waiting...
...........
Really need help n once again sorry for my bad english.
Try install SlimLP and dirty flash (without any wipe) temasek or what ever else. Archidroid work for You because have many drivers for different chipsets.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Try install SlimLP and dirty flash (without any wipe) temasek or what ever else. Archidroid work for You because have many drivers for different chipsets.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
ok i will try. But what different dirty flash over SlimLP ? if i flash temasek on top of SlimLP, it will formatting system.
Sent from my GT-I9300 using XDA-Developers mobile app
reinzl said:
ok i will try. But what different dirty flash over SlimLP ? if i flash temasek on top of SlimLP, it will formatting system.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
It formatting but rly not formatting
Dirty flash is the best solution for other not bootable roms
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
It formatting but rly not formatting
Dirty flash is the best solution for other not bootable roms
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have try but not help.. Any others solution ?
reinzl said:
I have try but not help.. Any others solution ?
Click to expand...
Click to collapse
Try reinstall efs, bootloader and modem to lastest version.
To do that install multi-file samsung TW 4.3 via odin (will delete Your all files!!). And then root this (cf auto root) and install recovery and than wipe all storage and flash rom.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Try reinstall efs, bootloader and modem to lastest version.
To do that install multi-file samsung TW 4.3 via odin (will delete Your all files!!). And then root this (cf auto root) and install recovery and than wipe all storage and flash rom.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
How to reinstall efs? Can i flash bl and modem from different country? Sorry asking again.
reinzl said:
How to reinstall efs? Can i flash bl and modem from different country? Sorry asking again.
Click to expand...
Click to collapse
Use multi-files from one pack, this will install all what You want and from one pack will work at 100% with different packs I don't know but propobly will work.
rafciowis1999 said:
Use multi-files from one pack, this will install all what You want and from one pack will work at 100% with different packs I don't know but propobly will work.
Click to expand...
Click to collapse
Make firmware repair with cgwyn from single file latest I9300XXUGPB1.. create BOOTLOADER,CSC,AP,MODEM.
flash with odin 3.10.7, flash cf-root, flash twrp 3.0.2.1, flash rom&gapps but not help. can you explain what about logcat above?
Sent from my SM-N910C using XDA-Developers mobile app
reinzl said:
Make firmware repair with cgwyn from single file latest I9300XXUGPB1.. create BOOTLOADER,CSC,AP,MODEM.
flash with odin 3.10.7, flash cf-root, flash twrp 3.0.2.1, flash rom&gapps but not help. can you explain what about logcat above?
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
Propobly You don't have universal chipset. flash archidroid and in fireware on auto will select one automaticly. tell me Your firemware.
rafciowis1999 said:
Propobly You don't have universal chipset. flash archidroid and in fireware on auto will select one automaticly. tell me Your firemware.
Click to expand...
Click to collapse
Autodetect : Semcosh.
reinzl said:
Autodetect : Semcosh.
Click to expand...
Click to collapse
Thats why. Find rom for this chipset. I will seek for this too.
Sent from my GT-I9300 using XDA-Developers mobile app
---------- Post added at 10:50 PM ---------- Previous post was at 10:46 PM ----------
But I thing there is no one cm13 for semcosh becouse semcosh is very rare and hard to develop.
rafciowis1999 said:
Thats why. Find rom for this chipset. I will seek for this too.
Sent from my GT-I9300 using XDA-Developers mobile app
---------- Post added at 10:50 PM ---------- Previous post was at 10:46 PM ----------
But I thing there is no one cm13 for semcosh becouse semcosh is very rare and hard to develop.
Click to expand...
Click to collapse
What about cm 11 or others i9300 kitkat rom? Cz my phone only boot with kitkat. What different semcosh and murata? Is there any i9300 LP/M rom for semcosh?
reinzl said:
What about cm 11 or others i9300 kitkat rom? Cz my phone only boot with kitkat. What different semcosh and murata? Is there any i9300 LP/M rom for semcosh?
Click to expand...
Click to collapse
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
Downloading now latest temasek cm 13 and hardfix kernel 6.0.1 aroma.. will report soon.
Sorry i just tested but no joy. Bro ?
rafciowis1999 said:
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
I just tested but no joy. Bro ?
Sent from my GT-I9300 using XDA-Developers mobile app
reinzl said:
I just tested but no joy. Bro ?
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
You have to stay with archidroid. for end You can test dirty flash on working archidroid (without any wipe).
I was unlocked my bootloader then installed TWRP & reboot this set !! and stuck in Bootloader Unlock Screen....pls help me...pls
RitwikB said:
I was unlocked my bootloader then installed TWRP & reboot this set !! and stuck in Bootloader Unlock Screen....pls help me...pls
Click to expand...
Click to collapse
Can you enter in recovery
Sent from my XT1521 using XDA-Developers mobile app
Sher1234 said:
Can you enter in recovery
Sent from my XT1521 using
didnt get u sir...ple help me out..
Click to expand...
Click to collapse
RitwikB said:
Sher1234 said:
Can you enter in recovery
Sent from my XT1521 using
didnt get u sir...ple help me out..
Click to expand...
Click to collapse
Are you able to access twrp recovery or say bootloader
If yes the just wipe data, system, cache, davlik cache & install cm13
& If not then you have yo flash via fastboot the official 6.0 firmware for xt1521 to recover it to stock 6.0 then you can try to reflash squid twrp using fastboot with no issues
In past it happened to me but i was able to access twrp recovery so it was easy for me to recover
Note: if you have already updated your device to official 6.0 marshmallow given by Motorola then don't ever dare flash official 5.0 or 5.1.1 via fastboot only flash 6.0
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
@RitwikB have you checked the post
Sent from my XT1521 using XDA-Developers mobile app
yes Sir i accessed & wipe everything as u mentioned ! but after wiping it says no os installed ! so wht should i do now?? how can i install cm13 how??
thnq so much ....its wrking now...but have a problem...pls help me to figure out this also !!!
Sher1234 said:
@RitwikB have you checked the post
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
thnq so much...its wrking now...but have a problem....pls help me to figure out this also.....
Sher1234 said:
@RitwikB have you checked the post
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
when i installed cm13 and watch a youtube video how to flash supersu on cm13...and i flashed supersu but again stuck after the booloader is unlock warning !! pls help me to figure out this....cz again i was flash cm13....and its 2nd time...pls how can i install supersu having no issue...
RitwikB said:
when i installed cm13 and watch a youtube video how to flash supersu on cm13...and i flashed supersu but again stuck after the booloader is unlock warning !! pls help me to figure out this....cz again i was flash cm13....and its 2nd time...pls how can i install supersu having no issue...
Click to expand...
Click to collapse
http://androiding.how/root-moto-g-2014-marshmallow/
However, if you're using CM13, root is already pre-installed, no need to use SuperSU. Enable root in Developer Options.
RitwikB said:
when i installed cm13 and watch a youtube video how to flash supersu on cm13...and i flashed supersu but again stuck after the booloader is unlock warning !! pls help me to figure out this....cz again i was flash cm13....and its 2nd time...pls how can i install supersu having no issue...
Click to expand...
Click to collapse
Don't flash SuperSU
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 08:46 AM ---------- Previous post was at 08:45 AM ----------
For Root use inbuilt root option in cm which is provided under developer options
Sent from my XT1521 using XDA-Developers mobile app
Sher1234 said:
Don't flash SuperSU
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 08:46 AM ---------- Previous post was at 08:45 AM ----------
For Root use inbuilt root option in cm which is provided under developer options
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
Sir i alrdy flashed it to latest one...and everything's fine but superSU needs update and when i press update it says failed to update reboot and try again...pls help me...
RitwikB said:
Sir i alrdy flashed it to latest one...and everything's fine but superSU needs update and when i press update it says failed to update reboot and try again...pls help me...
Click to expand...
Click to collapse
Don't use SuperSU it causes problems
Sent from my XT1521 using XDA-Developers mobile app
Sher1234 said:
Don't use SuperSU it causes problems
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
then what should i do now?? & which type of problem can u explain me Sir??
RitwikB said:
then what should i do now?? & which type of problem can u explain me Sir??
Click to expand...
Click to collapse
If you want you can reflash rom+gapps
& If you want to know what I'm using here it is
ROM - Turbo ROM 4.0
GApps - open gapps 6.0-arm-micro
Device - XT1521 surnia
Everything working Awesome
So if you want this
Download LATEST Turbo ROM & Gapps
Place it in SD-card
Reboot in TWRP
WIPE -> Advanced Wipe -> Davlik Cache, System, Data, Cache
Wipe It
Then Install ROM & GApps
Just Reboot & Enjoy
As per my experience till now ROM is awesome
But be careful while using Layers
Except it everything is just awesome
Sent from my XT1521 using XDA-Developers mobile app
Sher1234 said:
If you want you can reflash rom+gapps
& If you want to know what I'm using here it is
ROM - Turbo ROM 4.0
GApps - open gapps 6.0-arm-micro
Device - XT1521 surnia
Everything working Awesome
So if you want this
Download LATEST Turbo ROM & Gapps
Place it in SD-card
Reboot in TWRP
WIPE -> Advanced Wipe -> Davlik Cache, System, Data, Cache
Wipe It
Then Install ROM & GApps
Just Reboot & Enjoy
As per my experience till now ROM is awesome
But be careful while using Layers
Except it everything is just awesome
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
thnq sooo much sir but what abt that Layer and can u give me the link of turbo rom and gaaps??and sir need a help again....i want to know that wht abt that gapps nano,gaaps micro,stock,super,full wht abt this????and sir i have a moto e also....so when i installed cm13 & gaaps nano 5.1 lolipop base its installed but after installing Playstore not openning...really its to tough to control android apps widout play store...pls help sir !!
Sher1234 said:
If you want you can reflash rom+gapps
& If you want to know what I'm using here it is
ROM - Turbo ROM 4.0
GApps - open gapps 6.0-arm-micro
Device - XT1521 surnia
Everything working Awesome
So if you want this
Download LATEST Turbo ROM & Gapps
Place it in SD-card
Reboot in TWRP
WIPE -> Advanced Wipe -> Davlik Cache, System, Data, Cache
Wipe It
Then Install ROM & GApps
Just Reboot & Enjoy
As per my experience till now ROM is awesome
But be careful while using Layers
Except it everything is just awesome
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
and Sir one more question !!! if i wipe Internal Storage then wht will happen??i already wiped it too many times !!
RitwikB said:
thnq sooo much sir but what abt that Layer and can u give me the link of turbo rom and gaaps??and sir need a help again....i want to know that wht abt that gapps nano,gaaps micro,stock,super,full wht abt this????and sir i have a moto e also....so when i installed cm13 & gaaps nano 5.1 lolipop base its installed but after installing Playstore not openning...really its to tough to control android apps widout play store...pls help sir !!
Click to expand...
Click to collapse
Turbo ROM thread ink XDA: http://forum.xda-developers.com/showthread.php?t=3394207
GApps: www.opengapps.org
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 08:57 AM ---------- Previous post was at 08:53 AM ----------
RitwikB said:
Gapps nano,gaaps micro,stock,super,full wht abt this????
Click to expand...
Click to collapse
GApps
Nano
Micro
Mini
Super
Stock
Full
Aroma
Are different variants of opengapps
If you wana use GApps for MotoE2 with Marshmallow ROM
USE: 6.0-arm-micro
Its best for Normal Use
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 09:01 AM ---------- Previous post was at 08:57 AM ----------
RitwikB said:
Sir i have a moto e also....so when i installed cm13 & gaaps nano 5.1 lolipop base its installed but after installing Playstore not openning...really its to tough to control android apps widout play store...pls help sir !!
Click to expand...
Click to collapse
Here You Had Gome Wrong You Flashed Lollipop GApps on Marshmallow ROM.
So You are facing issues with GOOGLE APPS like PlayStore.
To Rectify this Clean install ROM & GApps
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 09:03 AM ---------- Previous post was at 09:01 AM ----------
RitwikB said:
and Sir one more question !!! if i wipe Internal Storage then wht will happen??i already wiped it too many times !!
Click to expand...
Click to collapse
Wiping Internal Storage will wipe Your Data Stored in Internal Storage & Nothing Else
Like:- All your Pics in Internal Storage will be wiped
Sent from my XT1521 using XDA-Developers mobile app
Sher1234 said:
Turbo ROM thread ink XDA: http://forum.xda-developers.com/showthread.php?t=3394207
GApps: www.opengapps.org
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 08:57 AM ---------- Previous post was at 08:53 AM ----------
GApps
Nano
Micro
Mini
Super
Stock
Full
Aroma
Are different variants of opengapps
If you wana use GApps for MotoE2 with Marshmallow ROM
USE: 6.0-arm-micro
Its best for Normal Use
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 09:01 AM ---------- Previous post was at 08:57 AM ----------
Here You Had Gome Wrong You Flashed Lollipop GApps on Marshmallow ROM.
So You are facing issues with GOOGLE APPS like PlayStore.
To Rectify this Clean install ROM & GApps
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 09:03 AM ---------- Previous post was at 09:01 AM ----------
Wiping Internal Storage will wipe Your Data Stored in Internal Storage & Nothing Else
Like:- All your Pics in Internal Storage will be wiped
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
Sir mine moto E 2014 is Lollipop 5.1 so I download Gaaps 5.1 Nano !! So I should Download Marshmallow Based Micro Gaaps right ??? Thanks Sir !!
Sher1234 said:
Turbo ROM thread ink XDA: http://forum.xda-developers.com/showthread.php?t=3394207
GApps: www.opengapps.org
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 08:57 AM ---------- Previous post was at 08:53 AM ----------
GApps
Nano
Micro
Mini
Super
Stock
Full
Aroma
Are different variants of opengapps
If you wana use GApps for MotoE2 with Marshmallow ROM
USE: 6.0-arm-micro
Its best for Normal Use
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 09:01 AM ---------- Previous post was at 08:57 AM ----------
Here You Had Gome Wrong You Flashed Lollipop GApps on Marshmallow ROM.
So You are facing issues with GOOGLE APPS like PlayStore.
To Rectify this Clean install ROM & GApps
Sent from my XT1521 using XDA-Developers mobile app
---------- Post added at 09:03 AM ---------- Previous post was at 09:01 AM ----------
Wiping Internal Storage will wipe Your Data Stored in Internal Storage & Nothing Else
Like:- All your Pics in Internal Storage will be wiped
Sent from my XT1521 using XDA-Developers mobile app
Click to expand...
Click to collapse
And Sir different between Gaaps Variant's pls tell me !! It will help me more !! Thx !!