hi ... i'm using galaxy s3 gt i9300 and have been using cm11 for 6 months normally..
yesterday suddenly my phone was stuck at samsung screen ... i tried twrp to reinstall cm11 but when i tries to factory reset it fails and shows a bunch of errors like :
unable to mount system
unable to mount data
unable to mount storage .. etc
then i tried to install from micro sdcard but it shows 0mb same as internal storage..
i tried to flash cm11 via adb from pc but it also fails
can you help me ?
thanks
i tried but it also failed it says in log box : re-partition operation failed
this is what i get when i try to flash another recovery (philz) :
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> PK
<ID:0/003>
and gets stuck at NAND Write Start!! forever
any1 can help ???
@black leg try to flash stock rom using odin !!!
princevirus said:
@black leg try to flash stock rom using odin !!!
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300XXUGMK6_2168382_REV00_user_low_ship_.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried to only flash the rom and tried to flash with pit file but it always fails or gets stuck at nand start all
Related
Hi guys,
Got a red samsung s3 (gt-i9300).
The phone wont start normally, it will just hang at the phone start screen when you press the power button.
The phone is unrooted and on stock rom. I can get in both download mode & recovery mode.
I tried flashing rom using odin but got this error instead:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Going into recovery mode will display lots of errors like this (pls refer attachment)
Can you guys please advise me on what I can do to revive the phone?
Any help would be appreciated.
Thanks!
try to flash emergency firmware ,if not ,then service
alecore said:
try to flash emergency firmware ,if not ,then service
Click to expand...
Click to collapse
how to flash emergency firmware?
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 here
follow the steps and you will be fine
alecore said:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 here
follow the steps and you will be fine
Click to expand...
Click to collapse
It didn't work.... Y__Y
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Your emmc chip is damaged, new motherboard required.
Good Afternoon,
After reading all of the threads pertaining to this, I am not step closer in solving my problem with my phone. A little background on the issue. 4 weeks ago my son, had his phone stolen. However, it has been recovered and returned to me.
1. Once returned I tried to factory reset the S6 which failed. The phone was asking for a Samsung account in which the phone was initial for. Which was me, but every time I entered the correct information the warning was process failed. Got it!! Time to flash
2. After coming to this site from the advice of a co-working I downloaded the Samsung USB drivers, Odin v3.10.6 and ROM (G925AUCU3BOI2) (this is not the first ROM in downloaded)(I have been at this for a couple of days) which is the most current for v5.1.1.
3. After following the steps, it has passed within Odin. (See Log below)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925AUCU3BOI2_CL5527015_QB6363207_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G925AUCU3BOI2_CL5527015_QB6363207_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G925AUCU3BOI2_CL5527015_QB6363207_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G925AATT3BOI2_CL5527015_QB6363207_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
4. Once everything went through and the Edge rebooted, it has looked like that nothing has changed and the phone is still asking me for my samsung information stating that there was an abnormal factory reset. Same as it stated before. and with me adding the correct samsung information still saying that the process has failed.
Nothing has changed with installing the new firmware on the phone. Am I doing something wrong? Is there a step that is missing in flashing this phone?
Prior issues leading to me installing this ROM was:
Receiving error: SW REV CHECK FAIL DEVICE:3 BINARY: 2
Load failing after a NAND whatever its called..lol
Please any information will be helpful! Thank You
hi...
ill try to flash my phone but always get stuck at ... "system.img"
Flash tools Odinv3.12.7
Firmware i tried G925F_1_20180809104101_qr55subv5q_fac ----- SM-G925F_1_20180716174114_hxg9p8nitx_fac
log.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried
G925FXXU1AOCV_G925FDDX1AOCV_DTM
G925FXXU2POGN_G925FDDX2POGO_DTM
G925FXXU6ERF5_G925FDDX6ERG1_DTM
DBT-G920FXXU2BOFJ
nothing works^^
should i try one of these?
updato.com/firmware-archive-select-model?q=SM-G925F&exact=1&r=DTM&v=&rpp=50
unnamedquaker said:
hi...
ill try to flash my phone but always get stuck at ... "system.img"
Flash tools Odinv3.12.7
Firmware i tried G925F_1_20180809104101_qr55subv5q_fac ----- SM-G925F_1_20180716174114_hxg9p8nitx_fac
log.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried
G925FXXU1AOCV_G925FDDX1AOCV_DTM
G925FXXU2POGN_G925FDDX2POGO_DTM
G925FXXU6ERF5_G925FDDX6ERG1_DTM
DBT-G920FXXU2BOFJ
nothing works^^
should i try one of these?
updato.com/firmware-archive-select-model?q=SM-G925F&exact=1&r=DTM&v=&rpp=50
Click to expand...
Click to collapse
You did not inform about your device situation details and ROM details. including android versions
x1123 said:
You did not inform about your device situation details and ROM details. including android versions
Click to expand...
Click to collapse
it is not my smartphone. I got it with the message "damaged device memory" after an update.
status : nothing on the phone (recovery only)
twrp not working (unable to mount anything)
I once tried to autoroot it but I factory reset it because the sim didn't work, and I went to developer options and had it OEM Locked, I don't know what was I thinking, seriously, and I tried to use Odin v3 to flash original firmware into it, It gives me this: <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2546 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried using multiple odin's and I have a Samsung usb driver installed.
Android Recovery
Samsung/j5y17ltexx/j5y17lte
7.0/NRD90M/J530FXXU1AQF5
Please Help Me I Have No Phone Currently, The Small And Big Are Going To Be Appreciated, Sincerely, RetroSkills.
This morning My Samsung Galaxy J5 prime Started hanging randmoly , I put it on charging and left. After some time when i came back it was switched of and when i started it showed Could Not do normal Boot , Invalid Kernal Length. i have never tried to root my phone or flash anything . It was just normally used.
I dont know the exact firmwares and build no since it wont start . It has SM-G570FZKGINS on its box . Any way to recover it without loosing data ?
Re-flash phone's Stock ROM by means of ODIN
jwoegerbauer said:
Re-flash phone's Stock ROM by means of ODIN
Click to expand...
Click to collapse
I downloaded stock rom and and added BL,AP,CP,CSC In ODIN but it gave this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 2848 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Could this be beacuse this is not correct ROM ?
Could this be because in Download mode its says FRP lock : ON ?
Anyone there with any Idea what to do ?