[Add-on Zip] [Aroma] CyanOxygen Tank [For All OOS 3.x based roms] - OnePlus 2 Android Development

Remember CyanOxy OS? CyanOxygen Tank is a conversion-cum-debloater zip allowing you to have full control over the customization of your Oneplus 2. It gives you the features of CM on a debloated and rock stable Oxygen OS base.
View attachment 3776181
Features:
-UNIVERSAL AND FUTURE-PROOF. Can be used on any Oxygen OS rom running marshmallow (eg. Skydragon, stock OOS 3.x). Doesn't need to be updated whenever OnePlus updates Oxygen OS, this zip should work on all future roms too. Could work on OOS 2.x based roms too but I haven't tested it and the debloater script has been made with OOS 3.0.2 kept in mind. You could try it anyways, no risks are involved
-Aroma installer with seberal inbuilt themes which are selectable (credits @amarullz)
-Option to choose the apps you wish to remove during the debloating process (don't worry, none of them are essential so removing them won't mess up your phone)
-Option to choose the Cyanogen apps that you would like to install
-Option to install Viper4Android FX (credits ViPER520). Included SELinuxModeChanger to help install Viper (credits @MrBIMC)
-Choose between your favourite bootanimations, Stock, CM13, Cyanogen OS, CyanOxy OS
-No risk involved and noob-friendly
-Leaves your build.prop clean, no credits taken in the phone info page.
-Doesn't mess with your root or kernel, you can keep your phone as clean as you like.
-Option to wipe Dalvik cache after install
-Remover zip available
Install instructions:
-Turn off zip signature verification in TWRP.
-Flash the main and extension zips over any OOS 3.x based rom.
-Customize it through the Aroma Installer (I suggest that you select all options in the debloater menu)
-Enjoy
-If you wish to remove any of the apps, flash the remover zip.
List of CM apps included:
In the main zip:
-Trebuchet
-BoxerCalendar
-BoxerEmail
-LockClock
-Screencast
-Sound Recorder
-CMFileManager
-CMBrowser
In the extension zip:
-AudioFX
-CMWallpapers
-Eleven Music Player
Changelog:
-v1: Initial release
Download
XDA:DevDB Information
CyanOxygen Tank, ROM for the OnePlus 2
Contributors
zoroarctic
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Oxygen OS 3.x Based Rom
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-08
Created 2016-06-08
Last Updated 2016-06-11

reserved #1

reserved #2

can this be flashed on hydrogenos?

matharuajay said:
can this be flashed on hydrogenos?
Click to expand...
Click to collapse
The rom won't be debloated properly since the script is made for Oxygen OS. However, CM apps and bootanimations should work fine.

im on cynoxy 3.0
so what will b the procedure?
do i need to flash the stock Oxygen Os 3.0.2 again?

This sounds like a very nice idea!
I do have a question though: Which Cyanogen features does this install? And most importantly for me, does this add-on include LiveDisplay?
Thanks!

ashmeet094 said:
im on cynoxy 3.0
so what will b the procedure?
do i need to flash the stock Oxygen Os 3.0.2 again?
Click to expand...
Click to collapse
You don't need this on CyanOxy, everything here was incorporated in the rom

Lewn said:
This sounds like a very nice idea!
I do have a question though: Which Cyanogen features does this install? And most importantly for me, does this add-on include LiveDisplay?
Thanks!
Click to expand...
Click to collapse
No I'm sorry this doesn't have rom level features like that baked in, it would be impossible to do that with Oxygen OS unless someone makes an Xposed module
This will install the followed CM apps:
CM Browser
CMGallery
CM File manager
Boxer Email and Boxer Calendar (from cyanogen os)
LockClock (the cm13 clock app with the awesome widget)
Screencast
CM Sound recorder
Trebuchet (the Cyanogenmod launcher)
I forgot to add the Eleven music player, I'll update the zip later with that

zoroarctic said:
You don't need this on CyanOxy, everything here was incorporated in the rom
Click to expand...
Click to collapse
i have flashed it..without reading ur coment
shud i restore to back up or is it ok

zoroarctic said:
No I'm sorry this doesn't have rom level features like that baked in, it would be impossible to do that with Oxygen OS unless someone makes an Xposed module
This will install the followed CM apps:
CM Browser
CMGallery
CM File manager
Boxer Email and Boxer Calendar (from cyanogen os)
LockClock (the cm13 clock app with the awesome widget)
Screencast
CM Sound recorder
Trebuchet (the Cyanogenmod launcher)
I forgot to add the Eleven music player, I'll update the zip later with that
Click to expand...
Click to collapse
Thank you for your quick reply! Because LiveDisplay is one of the most important reasons for me to switch to CM13, I think i will just have to flash CM13...

ashmeet094 said:
i have flashed it..without reading ur coment
shud i restore to back up or is it ok
Click to expand...
Click to collapse
No issues, it really didn't change anything except for the bootanimation. No need to flash anything now.

Lewn said:
Thank you for your quick reply! Because LiveDisplay is one of the most important reasons for me to switch to CM13, I think i will just have to flash CM13...
Click to expand...
Click to collapse
You could use CF Lumen, provides the same functionality
Download it from the playstore

Take out a new rom?
Or I install the V3?
Enviado desde mi ONE A2003 mediante Tapatalk

angel.martinezsanchez.92 said:
Take out a new rom?
Or I install the V3?
Enviado desde mi ONE A2003 mediante Tapatalk
Click to expand...
Click to collapse
I'm sorry I didn't quite understand?

I guess I cannot use cm13 themes as cyanoxy. Thanks for this hard work. Will try )
Sent from my ONE A2003 using Tapatalk

zoroarctic said:
Remember CyanOxy OS? CyanOxygen Tank is a conversion-cum-debloater zip allowing you to have full control over the customization of your Oneplus 2. It gives you the features of CM on a debloated and rock stable Oxygen OS base.
View attachment 3776181
Features:
-UNIVERSAL AND FUTURE-PROOF. Can be used on any Oxygen OS rom running marshmallow (eg. Skydragon, stock OOS 3.x). Doesn't need to be updated whenever OnePlus updates Oxygen OS, this zip should work on all future roms too. Could work on OOS 2.x based roms too but I haven't tested it and the debloater script has been made with OOS 3.0.2 kept in mind. You could try it anyways, no risks are involved
-Aroma installer with seberal inbuilt themes which are selectable (credits @amarullz)
-Option to choose the apps you wish to remove during the debloating process (don't worry, none of them are essential so removing them won't mess up your phone)
-Option to choose the Cyanogen apps that you would like to install
-Option to install Viper4Android FX (credits Viper520). Included SELinuxModeChanger to help install Viper (credits @MrBIMC)
-Choose between your favourite bootanimations, Stock, CM13, Cyanogen OS, CyanOxy OS
-No risk involved and noob-friendly
-Leaves your build.prop clean, no credits taken in the phone info page.
-Doesn't mess with your root or kernel, you can keep your phone as clean as you like.
-Option to wipe Dalvik cache after install
List of CM apps included:
In the main zip:
-Trebuchet
-BoxerCalendar
-BoxerEmail
-LockClock
-Screencast
-Sound Recorder
-CMFileManager
-CMBrowser
In the extension zip:
-AudioFX
-CMWallpapers
Eleven Music Player
Install instructions:
-Turn off zip signature verification in TWRP.
-Flash the main zip over any Oxygen OS 3.x based rom. Then flash the extension zip.
-Customize it through the Aroma Installer (I suggest that you select all options in the debloater menu)
-Enjoy
Changelog:
-v1: Initial release (extension zip added)
Download
XDA:DevDB Information
CyanOxygen Tank, ROM for the OnePlus 2
Contributors
zoroarctic
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Oxygen OS 3.x Based Rom
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-08
Created 2016-06-08
Last Updated 2016-06-08
Click to expand...
Click to collapse
Thank you for copying my work.

alexis.bosman said:
Thank you for copying my work.
Click to expand...
Click to collapse
I'm sorry, could you link me to your work which I "copied"?
I made this as an alternative for my old rom for this device, it offers the same functionality with an easier mode of
You could see this if you don't believe me
http://forum.xda-developers.com/oneplus-2/development/rom-cyanoxy-os-t3340943

zoroarctic said:
I'm sorry, could you link me to your work which I "copied"?
I made this as an alternative for my old rom for this device, it offers the same functionality with an easier mode of
You could see this if you don't believe me
http://forum.xda-developers.com/oneplus-2/development/rom-cyanoxy-os-t3340943
Click to expand...
Click to collapse
It's not a problem! I like what do you did, but I made boosters, which are like addon-zips too for various ROMs for the OP2 including one for OxygenOS 3.0.2
My zips basically do the same as yours does but without an aroma installer. Though I planned to add aroma in the near future. But don't worry mate it is great what you did and you deserve a thumbs up!
If you wanna see my work: www.boostersbyalexis.tk

alexis.bosman said:
It's not a problem! I like what do you did, but I made boosters, which are like addon-zips too for various ROMs for the OP2 including one for OxygenOS 3.0.2
My zips basically do the same as yours does but without an aroma installer. Though I planned to add aroma in the near future. But don't worry mate it is great what you did and you deserve a thumbs up!
If you wanna see my work: www.boostersbyalexis.tk
Click to expand...
Click to collapse
Haha I'm sorry man, I haven't ever seen this project (I don't think it's on XDA either, and I'm active just here)
Some guys on my rom thread asked me to include Aroma to help them choose and on my latest update there, everyone got confused due to the messed up way in which OOS 3.0.2 needs to be installed
So I thought making this would help them bring my rom to their device without any sorts of problems and hassles. So I basically made it out of frustration after answering so many of their queries
I know how annoying it is to have others take credit for what you do haha, thank you for understanding. I'll check your work out, seems really cool too

Related

[ROM] [MMB29Q] Optimized Stock Rom (Debloated, Odex, Aroma Installer!)

Welcome to my new thread!
I have just created a new custom rom which is based of stock android. The rom is Debloated, Odexed and has Layers support! I use this rom as my daily driver. The battery life and the performance is brilliant!
For customization I´ve added Aroma Installer. Now you can choose if you want for example Viper4Android installed I´ve also added Layers support. Because of some problems with SuperSU you have to flash the SuperSU.zip manually.
Features
> Debloated
> Odex
> Busybox
> Layers support
> Aroma Installer: AdAway, File Explorer, Music Player, Viper4Android and Xposed optional!
> Permissive stock kernel
> Multiwindow activated
> Force encryption disabled
Downloads:
MHC19I ODEX Aroma: https://www.androidfilehost.com/?fid=24457741883933528
Vendor.img: https://www.androidfilehost.com/?fid=24457741883933527
Flash Instructions:
> Full Wipe
> Flash Rom
> Flash Vendor
> Wipe Cache, Dalvik
> Reboot!
XDA:DevDB Information
Optimized Stock Rom, ROM for the Google Nexus 6P
Contributors
EatBeans
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Android 6.0 Marshmallow
Version Information
Status: Stable
Created 2016-01-05
Last Updated 2016-02-02
Credits
Special Thanks to Hammerhead2502 for helping me to include Aroma Installer
*for those who are experiencing a battery drain
Thanks for this, gonna try it as a base for Cataclysm. :good:
I´m uploading right now the odex version must be online in 10-15 minutes
EatBeans said:
Welcome to my new thread!
I have just created a new custom rom which is based of stock android. The rom is Debloated, Deodexed and Rooted! I use this rom as my daily driver. The battery life and the performance is brilliant!
For customization I´ve added Aroma Installer. Now you can choose if you want for example Viper4Android installed I´ve also added Layers support. Because of some problems with SuperSU you have to flash it manually.
Downloads:
MMB29S DEODEX Aroma:
MMB29P ODEX Aroma:
SuperSU: https://www.androidfilehost.com/?fid=24352994023702766
Flash Instructions:
- Full Wipe
- Install Rom
- Install Optional Files
- Wipe Cache, Dalvik
- Reboot!
XDA:DevDB Information
Optimized Stock Rom, ROM for the Google Nexus 6P
Contributors
EatBeans
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Android 6.0 Marshmallow
Version Information
Status: Testing
Release Date: 2016-01-05
Created 2016-01-05
Last Updated 2016-01-05
Credits
Special Thanks to Hammerhead2502 for helping me to include Aroma Installer
Click to expand...
Click to collapse
Just flash via TWRP ?
Odex version is online.
sasidhar79 said:
Just flash via TWRP ?
Click to expand...
Click to collapse
Yeah
EatBeans said:
Yeah
Click to expand...
Click to collapse
you rock
Great! Is this rooted systemless, and google pay is working?
the rom is not prerooted but in the description is a link to systemless root and I think android pay is not working but i am not sure
Do we need to flash a vendor file?
Sent from my Nexus 6P using Tapatalk
I am having an alert on boot that say that there is a interna issue in the device. Clean flash.
I am not sure but if it doesn´t work. Here is the vendor.img: https://www.androidfilehost.com/?fid=24352994023705869
Shaglok said:
I am having an alert on boot that say that there is a interna issue in the device. Clean flash.
Click to expand...
Click to collapse
Please try to flash the vendor.img
EatBeans said:
Please try to flash the vendor.img
Click to expand...
Click to collapse
Done, and fixed. Thanks!
Do we have to be on systemless or can we use SuperSU 2.52?
I think you must use systemless root because of the kernel patch which is in the latest SuperSU versions integrated but in the older ones not. Correct me if I'm wrong
EatBeans said:
I think you must use systemless root because of the kernel patch which is in the latest SuperSU versions integrated but in the older ones not. Correct me if I'm wrong
Click to expand...
Click to collapse
Guess I'll try it later and see haha
Will this force encrypt?
Sent from San Antonio Tx- Nexus 6p
flashback7 said:
Will this force encrypt?
Sent from San Antonio Tx- Nexus 6p
Click to expand...
Click to collapse
I think so. I'm just copying from my rom for the Nexus 5 so I don't have much knowledge about that but I think you need to flash another kernel with force encryption disabled. Remind that you have to flash SuperSU after you have installed another kernel Should I disable force encryption in my next build?
Maybe someone saw that I don't have a Nexus 6P. Is there someone who could sent me Screenshots of the system information, of the untouched homescreen+launcher for the description?
Thanks in advance!

[ROM] [13 Mar 2016] CyanogenMod 12.1 [5.1.1] [Beta4]

CyanogenMod 12.1 is a free, community built distribution of Android 5.1.1 (Lollipop) which greatly extends the capabilities of your phone.
These are unofficial Beta builds of CM12.1 for the HTC Desire 610.
To hear about the latest updates and changes to CyanogenMod as a whole, you can follow +CyanogenMod on Google+!
My change log is in post #2.
Code:
#include <stddisclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What doesn't work yet
- NFC
- GPS
Installation Instructions
1. You must unlock your bootloader or be S-OFF.
2. You must have a custom recovery installed that allows SELinux. Get TWRP build for HTC Desire 610 from here.
3. Download the current HTC Desire 610 build from here. If you want TWRP to check your downloads integrity put this md5 file in the same foleder as the rom zip.
4. Get Gapps from here.
5. Fully wipe your device from TWRP Recovery. eg WIPE > SWIPE to Factory Reset.
6. Install Rom and Gapps from TWRP Recovery then Wipe dalvic and cache then Reboot.
Credits
- CyanogenMod Team.
- u-ra for his work on the MEMUL which I used as a template to bring up the A3UL.
- zihan for his assistance in moving forward to lollpop.
If I have missed anyone please let me know and I will happily add to the credits.
XDA:DevDB Information
CM12.1 for HTC Desire 610, ROM for the HTC Desire 610
Contributors
MiniBlu, zihan
Source Code: https://github.com/MiniBlu
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: Beta4
Beta Release Date: 2016-03-13
Created 2016-02-29
Last Updated 2016-03-22
Change Log
-Beta 4 (13 Mar 2016)
- misc audio fixes
- Include webgl
- video library updates
- removed some incompatible duplicate libraries
- re-synced to upstream sources(March 1 security level patches).​
- Beta 2 (5 Mar 2016)
- Fixed AudioFx
- Fixed Fm Radio
- Misc sound improvements
-Improved bluetooth performance
- Modified permissions to allow non system apps to write to external_sd​
- Initial Release (Beta 1) 29 Feb 2016
- fixed WiFi
- I haven't modified the permissions to allow non system apps to write to the external sd card. So if you want your play store apps to be able to write to external_sd you will need to install the "SDFix" app by NextApp then let it do it's thing and reboot. (you can uninstall the app once it's rebooted and the fix will stay)
- See post below for a fix for the audiofx bug.​
Optional Extras
- To increase in call volumes on beta4 and earlier builds flash this.
- To improve camera picture quality on beta4 build and earlier flash this.
- To fix the AudioFx crashing bug on the 1st release(29 Feb 2016) just flash this update zip . It just updates a few audiofx libs. Do not on newer builds.
Reserved
Reserved
So far so good MiniBlu i noticed that even my games are running way better then before very nice work from you keep it up
Only bug i've found is that the audiofx crashes when i try to open it
What kernel can you recommend? That from zihan thread or Jmz one?
Any way to get a stock DPI on lollipop?
For example, in some pics of setting menu online, it is not as big.
I know this has to do with DPI, and changing it can cause compatibility issues, but I just wanna know what DPI I should use for a stock look DPI.
Changing it causes now launcher to look weird. Any suggestions?
Nice work! This rom is compatible with the xposed framework? Sorry but for me the xposed is very important...
Fishcat7 said:
Nice work! This rom is compatible with the xposed framework? Sorry but for me the xposed is very important...
Click to expand...
Click to collapse
On Google it says 5.1 is compatible
pafchu said:
So far so good MiniBlu i noticed that even my games are running way better then before very nice work from you keep it up,
Only bug i've found is that the audiofx crashes when i try to open it
Click to expand...
Click to collapse
Yes, I noticed that late last night. I'll look into it.
buyakk said:
What kernel can you recommend? That from zihan thread or Jmz one?
Click to expand...
Click to collapse
I rcomend the kernel that comes with the rom. The jmz kernel is for 4.4 stock roms and will not work with this rom. zihan hasn't released a flashable kernel yet but his sources and mine are almost identical as he based his work of my 4.4 cm kernel. I your wanting to build your own kernel the @zihans sources are the way to go at the moment.
magicstick5 said:
Any way to get a stock DPI on lollipop?
For example, in some pics of setting menu online, it is not as big.
I know this has to do with DPI, and changing it can cause compatibility issues, but I just wanna know what DPI I should use for a stock look DPI.
Changing it causes now launcher to look weird. Any suggestions?
Click to expand...
Click to collapse
240 dpi is the stock dpi it just looks different in cm. I would just changs launches and text size settings. You can also change dpi from in cm settings > display & lights with out changing build prop.
Fishcat7 said:
Nice work! This rom is compatible with the xposed framework? Sorry but for me the xposed is very important...
Click to expand...
Click to collapse
magicstick5 said:
On Google it says 5.1 is compatible
Click to expand...
Click to collapse
It definately should be but I haven't tried it yet. Give it a go, and let me know.
Note to people who want xposed.
Tried it out, but I got bootloops (you have to use a different method than kk).
If you see the flashable zip type of installation, it yields a bootloops.
Will search around for solutions.
magicstick5 said:
Note to people who want xposed.
Tried it out, but I got bootloops (you have to use a different method than kk).
If you see the flashable zip type of installation, it yields a bootloops.
Will search around for solutions.
Click to expand...
Click to collapse
There is a whole different installer for lollipop. I'll find it and post a link latter.
PS - To fix audiofx just flash this. It just updates some soundfx libs and configs.
For xposed install this zip file from twrp. Then reboot (it will take quite a while to reboot so just be patient. Then install this apk. then go in to xposed app and in framework press reboot. If you like HTC sence 7 look and apps try installing "Sensify" module to get htc service pack and set up permisions to unlock all HTC apps on playstore (even camera although I haven't tested it yet). edit - sensify doesn't actually work but xposed does.
I encountered problem with installing TWPR 3.0, after flash device goes to strange loop where instead of system, recovery is opened
Even beta works like a charm with the audiofx fix.
buyakk said:
I encountered problem with installing TWPR 3.0, after flash device goes to strange loop where instead of system, recovery is opened
Click to expand...
Click to collapse
Sounds like system patition got corrupt. Check to make sure you installed the corect twrp(for a3ul not some other device) as long as its the right one(if not intall the correct 1 with windroid tool) then use TWRP > WIPE > ADVANCED WIPE > and tick the boxes for system, data, cache and dalvic and swipe to format them, then return to main menu and install cm12.1 (or CM11) following the instuctions in the OP and you should be fine.
0xPraeT0Rian said:
Even beta works like a charm with the audiofx fix.
Click to expand...
Click to collapse
Thanks, it is going pretty well. Actually there is a new build upoading now (it will take a few hours to upload with my sh*t interneet connection so I probably won't post the link till the morning) It has a few good improvements. ie - better bluetooth performance, properly fixed speaker phone (louder and less echo), a few extra sound improvements (on top of the audiofx fix) and fixed permisions for non system apps writting to external_sd.
Yeah, even the headset volume is a bit low(with earplugs) but that's something i could live with.
Looking forward for the new version, great job man...the support for this device was dead.
MiniBlu said:
There is a whole different installer for lollipop. I'll find it and post a link latter.
PS - To fix audiofx just flash this. It just updates some soundfx libs and configs.
For xposed install this zip file from twrp. Then reboot (it will take quite a while to reboot so just be patient. Then install this apk. then go in to xposed app and in framework press reboot. If you like HTC sence 7 look and apps try installing "Sensify" module to get htc service pack and set up permisions to unlock all HTC apps on playstore (even camera although I haven't tested it yet). edit - sensify doesn't actually work but xposed does.
Click to expand...
Click to collapse
Thanks ,I was updated the audio configuration files for devices tree.
zihan said:
Thanks ,I was updated the audio configuration files for devices tree.
Click to expand...
Click to collapse
Cool. I have actually made quite a few changes to both device and vendor. I'll upload my stuff to git tomorrow and you can take a look and cherrypick what you want to commit.
The new build is uploaded just putting up the links now.
New Release is up in OP
Change Log
- Beta2 Release 1 Mar 2016
- Fixed AudioFx crashing
- Fixed speaker phone (louder with less echo)
- Improved bluetooth perfomance (new btuetooth cal)
- Various sound improvements ( nex mixer_paths.xml, handset cal, headset_cal, new device config files)
- Improves sdcard sccess (modified permisions to allow non system apps to write to external sd card)

[6.0.1][Stock+] OxygenOS 3.6.1 - Debloaded | Fast | Magisk | 💪

Hello and welcome to my Thread,
I want to share with you the daily driver for my brothr. I'm not a Brain my some other gus here .
Stock+ (HyperStock) is only a factory image based Rom. I cook it with SuperR's Kitchen and I only debloated it, add bootanimation and "steal" ah I mean add some Mods. Even the bootanimation is ripped.
WHY MAGISK?
Becouse my Brother like to play Pokemon GO and Magisk is the easiest way to hide root for some Apps like Pokemon or Snapchat.
Disclaimer:
#ReadMe
We are not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Features:
lastest OnePlus Image (OxygenOS 3.6.1)
Odex
Magisk v14.3
Busybox 1.27.2
no force encryption
removed dm-verity checks
init.d support
insecure boot image
Marvel VS DC bootanimation
AdAway v3.2
HTC Gallery
HTC Music Player
Xposed Installer
build.prop Tweaks
zipalign APK's
2,4 GHz WiFi improved
enable Miracast
disabled ADB Icon
uncolored Powersafer Mode
headphone volume warning disabled
heavy debloated
system/app/AntHalService*
system/app/BookmarkProvider*
system/app/BTtestmode*
system/app/btmultisim*
system/app/Chrome*
system/app/DMAgent*
system/app/DivesIconPack*
system/app/Drive*
system/app/Duo*
system/app/EngineeringMode*
system/app/EngSpecialTest*
system/app/FaceLock*
system/app/Galaxy4*
system/app/Hangouts*
system/app/HoloSpiralWallpaper*
system/app/LiveWallpapers*
system/app/Maps*
system/app/ModemTestMode*
system/app/Music2*
system/app/NFCTestMode*
system/app/OemAutoTestServer*
system/app/OEMLogKit*
system/app/OPBugReport_Complete*
system/app/OpenWnn*
system/app/OPWallpapers*
system/app/PartnerBookmarksProvider*
system/app/Photos*
system/app/PrintSpooler*
system/app/PhaseBeam*
system/app/RifonIconPack*
system/app/Stk*
system/app/SensorTestTool*
system/app/SwiftKey*
system/app/SwiftKeyFactorySettings*
system/app/talkback*
system/app/Videos*
system/app/WifiRfTestApk*
system/app/YouTube*
system/priv-app/OnePlusGallery*
system/priv-app/OPSimContacts*
system/reserve/Forum*
system/reserve/OPMusic*
system/reserve/SoundRecorder*
system/etc/usb_drivers.iso*
system/etc/recovery-resource.dat*
system/recovery-from-boot.p*
Click to expand...
Click to collapse
Chancelog:
- rebased on OxygenOS 3.6.1
- updated to magisk & magisk manager
- removed gms (Play Service) from Doze Whitelist
- updated Xposed Installer
Click to expand...
Click to collapse
Download:
-> Stock+ OOS 3.6.1
-> OOS 3.6.1 Firmware+Radio
-> LiveWallpaperPicker (<- If you need it)
Installation
From OOS 3.5.X:
- Download the ROM & copy it on your phone
- Do a factory wipe
- Flash the ROM and wait
- Enjoy
From not OOS based roms
-Flash the lastest OOS image
- Follow the intruction from the OOS part
FAQ:
#ReadMe
#1 DPI
if you want to change the dpi you need to flash the Zip from [email protected] ZIP. OxygenOS have some issues with changing the DPI.
#2 Xposed Installer don't work with Magisk Xposed
If you use the Xposed Module from Magisk Manager, you need to use the systemless Xposed Installer from here
if you like the ROM rate it and hit thanks
if you realy like it buy me a kebap
Special Thanks:
- Google
- XDA
- OnePlus
- SupeR
- Chainfire
- osm0sis
- Mentalmuso
- SyCreed
- NevaX1
- dh.harald
- Christian Tailor (for Marvel VS DC GIF)
- B!Gguy
- all I forgot
XDA:DevDB Information
HyperStock OxygenOS , ROM for the OnePlus 2
Contributors
Sh0X31
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: OOS 3.5.X
Version Information
Status: Stable
Created 2017-04-17
Last Updated 2017-04-17
I've been looking for something similar.... Will definitely give it a try
Can you change the dpi without problem? In stock is out of place some icons, use 360 ​​dpi:laugh:
Sent from my OnePlus 2 using XDA Labs
hey i just wanna ask that if you have installed exposed frameworks , is pokemon go still playable ??
Zyubi said:
hey i just wanna ask that if you have installed exposed frameworks , is pokemon go still playable ??
Click to expand...
Click to collapse
I don't know, I build the ROM but I have to ask my bro if he use Xposed or not
hpbrasil said:
Can you change the dpi without problem? In stock is out of place some icons, use 360 ​​dpi:laugh:
Sent from my OnePlus 2 using XDA Labs
Click to expand...
Click to collapse
Try it and report
Sh0X31 said:
I don't know, I build the ROM but I have to ask my bro if he use Xposed or not
Try it and report
Click to expand...
Click to collapse
No, the status bar icons are the same ... And the icons in the power off menu are the same, out of place. :crying:
Sent from my OnePlus 2 using XDA Labs
Almost removed every app which was causing android system battery drain:laugh: very excited to flash this one.... Nice job....
Anyway you can make the notification slider have custom settings
Do you mean custom Tiles?
Sh0X31 said:
Do you mean custom Tiles?
Click to expand...
Click to collapse
No I mean the slider button on the left side of the phone
Nice..works great..
Post edited
hpbrasil said:
No, the status bar icons are the same ... And the icons in the power off menu are the same, out of place. :crying:
Sent from my OnePlus 2 using XDA Labs
Click to expand...
Click to collapse
Yeah... this is a crazy weird issue since every build of Oxygen has been able to correctly allow changing of the DPI without any issue. I was discussing this in another thread somewhere far, far away since I don't recall where. But I think it has something to do with a specific frameware file or something to do with the frameware.. it's damn strange that all of a sudden we can't adjust the DPI. I do know a quick-fix-hack is to use an Xposed module that will allow you to change the DPI of specific apps but it still disfigures the whole system if you do it systemwide..
jbarcus81 said:
Yeah... this is a crazy weird issue since every build of Oxygen has been able to correctly allow changing of the DPI without any issue. I was discussing this in another thread somewhere far, far away since I don't recall where. But I think it has something to do with a specific frameware file or something to do with the frameware.. it's damn strange that all of a sudden we can't adjust the DPI. I do know a quick-fix-hack is to use an Xposed module that will allow you to change the DPI of specific apps but it still disfigures the whole system if you do it systemwide..
Click to expand...
Click to collapse
Waiting edition framework :highfive:
Charging speed is very slow unlike oos 3.5.8 it took 4 hours... For 10-100
Cable is new and was working fine with oos 3.5.8... So no problems in hardware part...
Installing this rom will replace TWRP?
Anyone tested ?
hoppingpanda said:
Installing this rom will replace TWRP?
Anyone tested ?
Click to expand...
Click to collapse
No..
mackhenri said:
Nice..works great..
Post edited
Click to expand...
Click to collapse
Significant performance /battery improvement.?
QQRaju said:
Significant performance /battery improvement.?
Click to expand...
Click to collapse
It's snappy compared to stock.. Battery lasts a little longer then stock
Is there any mirror available? I can't download from mega.nz it doesn't seems to work
yousuf.shareef said:
Is there any mirror available? I can't download from mega.nz it doesn't seems to work
Click to expand...
Click to collapse
same for me... there is quota exceeding message.
can somebody add another link?
EDIT: solved by creating free Mega account

[ROM][7.1.2][OFFICIAL][wt88047] NX ROM R11.1

Get the Google Pixel Experience (with the exception of the Pixel Navbar) on your Redmi 2/2 Prime!
Link to the ROM official page: http://www.nxrom.us/redmi2.html
Changelog of Release 11.1 (AUG/10/2017)
-Android 7.1.2 R29 merged
-Essential Google Services and Apps included (There is no need to install GAPPS)
-Incall vibration options
-More animation steps
-OMS7 (substratum) support - Install substratum app from Google Play Store
-PA Solid Circle Battery Style
-Ability to reset battery stats
-PA Color Engine with Pixel Blue and Nexus Teal options
-OTA Updates starting from this version
-Some fixes and improvements in system framework
Insturctions:
1. Download the ROM.
2. Boot into TWRP recovery (Vol Up + Vol Down + Power).
3. Wipe -> Dalvik Cache, System, Data & Cache.
4. Install -> Select the NX ROM -> Swipe to Flash.
5. Reboot System! :fingers-crossed:
Join the Google+ community @ https://plus.google.com/communities/109235522128893190473
Gapps: Included in the ROM!
Enjoy!
P.S. Make sure to update to AUG/30th/2017 Build through settings after flashing the ROM!
I just installed caf aosp 64... About an hour ago....btw gonna try it soon
ViperXvenom8888 said:
Get the Google Pixel Experience (with the exception of the Pixel Navbar) on your Redmi 2/2 Prime!
Link to the ROM official page: http://www.nxrom.us/redmi2.html
Changelog of Release 11.1 (AUG/10/2017)
-Android 7.1.2 R29 merged
-Essential Google Services and Apps included (There is no need to install GAPPS)
-Incall vibration options
-More animation steps
-OMS7 (substratum) support - Install substratum app from Google Play Store
-PA Solid Circle Battery Style
-Ability to reset battery stats
-PA Color Engine with Pixel Blue and Nexus Teal options
-OTA Updates starting from this version
-Some fixes and improvements in system framework
Insturctions:
1. Download the ROM.
2. Boot into TWRP recovery (Vol Up + Vol Down + Power).
3. Wipe -> Dalvik Cache, System, Data & Cache.
4. Install -> Select the NX ROM -> Swipe to Flash.
5. Reboot System! :fingers-crossed:
Join the Google+ community @ https://plus.google.com/communities/109235522128893190473
Gapps: Included in the ROM!
Enjoy!
P.S. Make sure to update to AUG/30th/2017 Build through settings after flashing the ROM!
Click to expand...
Click to collapse
Removed!
Can't able to root this ROM I tried super su,magisk su,pH su
Doesn't have good battery life,can't root the rom and it doesn't have DT2W. Will it have a good kernel in the next built and how to root the rom I tried magisk and supersu should I use phh's supersu
stevebobygeorge said:
Doesn't have good battery life,can't root the rom and it doesn't have DT2W. Will it have a good kernel in the next built and how to root the rom I tried magisk and supersu should I use phh's supersu
Click to expand...
Click to collapse
Their is a bug in the ROM that doesn't allow root for some reason, I'm not sure if the developers will fix it in the next Build. And battery life is good... I get 4-5 SOT. And I don't think it will have DT2W as it's a kernel thing, you can flash a custom kernel that supports DT2W.
amitpartial said:
Can't able to root this ROM I tried super su,magisk su,pH su
Click to expand...
Click to collapse
There is a bug in the ROM that doesn't allow root. Hopefully developers will fix it.
ViperXvenom8888 said:
Their is a bug in the ROM that doesn't allow root for some reason, I'm not sure if the developers will fix it in the next Build. And battery life is good... I get 4-5 SOT. And I don't think it will have DT2W as it's a kernel thing, you can flash a custom kernel that supports DT2W.
Click to expand...
Click to collapse
But you need root to tweak the custom kernel right anyway thank you for the fast reply
stevebobygeorge said:
But you need root to tweak the custom kernel right anyway thank you for the fast reply
Click to expand...
Click to collapse
Yes, to tweak any kernel settings through an app (Ex. Kernel Adiutor) you do need root. But you can try and find a custom kernel with Aroma Installer so you can configure the kernel settings before Flashing.
ViperXvenom8888 said:
Yes, to tweak any kernel settings through an app (Ex. Kernel Adiutor) you do need root. But you can try and find a custom kernel with Aroma Installer so you can configure the kernel settings before Flashing.
Click to expand...
Click to collapse
Thanks I will try it
ViperXvenom8888 said:
There is a bug in the ROM that doesn't allow root. Hopefully developers will fix it.
Click to expand...
Click to collapse
Please update whenever the bug is fixed
This ROM pretty cool except root function:angel:
I'm using 1gb RAM redmi 2, It get continue heat up when I flash official lineage 14, Aosp caf arm64, nexus experience, XUI, Mokee but, not with miui8 lollipop, Caf-citrus, Resurrection Remix, Old Cyanogen 14.1 nightly Built, Any solution? Or Why this happens ?
srbhsks said:
I'm using 1gb RAM redmi 2, It get continue heat up when I flash official lineage 14, Aosp caf arm64, nexus experience, XUI, Mokee but, not with miui8 lollipop, Caf-citrus, Resurrection Remix, Old Cyanogen 14.1 nightly Built, Any solution? Or Why this happens ?
Click to expand...
Click to collapse
Have you flashed Lollipop Firmware & Modem?
amitpartial said:
Please update whenever the bug is fixed
This ROM pretty cool except root function:angel:
Click to expand...
Click to collapse
I will
Hey the rom is good . And with future updates it will get better. Pls can anyone tell me how to enable navigation bar i cannot find it?
kartik2020 said:
Hey the rom is good . And with future updates it will get better. Pls can anyone tell me how to enable navigation bar i cannot find it?
Click to expand...
Click to collapse
It has all the Google Pixel features except the Pixel Navbar (As stated in the original post). Hopefully they'll add it in future updates :fingers-crossed:
ViperXvenom8888 said:
It has all the Google Pixel features except the Pixel Navbar (As stated in the original post). Hopefully they'll add it in future updates :fingers-crossed:
Click to expand...
Click to collapse
Ohh okay okay i didn't knew thanks bro
kartik2020 said:
Ohh okay okay i didn't knew thanks bro
Click to expand...
Click to collapse
Anytime! :good:
Thanks
srbhsks said:
I'm using 1gb RAM redmi 2, It get continue heat up when I flash official lineage 14, Aosp caf arm64, nexus experience, XUI, Mokee but, not with miui8 lollipop, Caf-citrus, Resurrection Remix, Old Cyanogen 14.1 nightly Built, Any solution? Or Why this happens ?
Click to expand...
Click to collapse
which is ur current rom?
old cm 14.1 link pls...

[ROM] AOKP - 7.1 2. [FULLY STABLE] August Security Pacth

ANDROID OPEN KANG PROJECT FOR Grand 2
* Stable Version - No fix needed *
What is AOKP?
AOKP stands for Android Open Kang Project. It is a custom ROM distribution for several high-end Android devices. The name is a play on the word kang and AOSP (Android Open Source Project). The name was sort of a joke, but it just stuck, just like our infatuation with unicorns.
We fork the source code of Android that Google puts out in the open with every major version release, and we then add the magical unicorn bytes (read: we add some of the coolest features that are both useful and make your ROM awesome).
With AOKP, you can generally do a lot more with your device than what you could do with the original firmware that came installed on it.
Why AOKP?
We were waiting for when you'd ask this.
There are a variety of reasons why a hilly billy Android user, on a bright sunny day, would suddenly start using AOKP and loving it.
For one, AOKP is lightweight. Most OEMs provide a heavy UI layer over Android and have loads of bloatware (i.e. apps that not everyone use every day, but you cannot remove because they're "baked in" by default). Since AOKP is built upon vanilla Android source, it has neither of the above.
Also AOKP has features that you will not find on your stock firmware. You can have a multitude of toggles to quickly flip a lot of your phone's settings right at your fingertips, or you can launch apps quickly from any screen using our Ribbons.
You can change almost each and every aspect of the OS, from its looks to the way it functions, with total freedom. And did we tell you, AOKP helps you make tacos?
Working
*Everything
Fixed (Update 18/09)
HD Video Recording
Offline Charging
Bugs
None known- Report if you find any
How to install
* you must have installed : TWRP
* go to TWRP and do a full wipe (system, data, cache, dalvik/art cache,preload) !
* Install AOKP ROM
* Install gapps (optional)
* Magisk( optional )
* Reboot to System
* Enjoy !!!
How to update
* copy the new update of AOKP to Internal/External Storage
* reboot device to TWRP
* wipe cache & dalvik cache
* install the new update of AOKP
* reboot to System
* Enjoy !!!
Download
AOKP ROM
Gapps
Credits
Acharya
Sudeep
AOKP team
Lineage OS Team
Grand 2 Telegram group
•Hash(for his tree, kernel, and vendor)
•Dankie001(for his hard work in los14.1)
•Adityaupreti for his huge contribution in g2
•Yumi14 For helping in fixing sim 1 data
anyone else i forgot im sorry
Contributors
Me 
 @Sudeep
 @Acharya
Hit the thanks button guys if you like my work
XDAevDB Information
AOKP N, ROM for the Samsung Galaxy Grand 2
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: Nougat
Stable Release Date: 18-09-2018
Last Updated 18-09-2018
great,thank u very much ,downloading
its really stable working very nice ,fast and sooth
gps is working,i love it
ss?
great rom no bug tnx alot:laugh:
Saahil Shaikh said:
ss?
Click to expand...
Click to collapse
here r ,icons r modified,u can choose urs
regards
Welcome bro
arjun1919 said:
great rom no bug tnx alot:laugh:
Click to expand...
Click to collapse
You're Welcome!
If you like hit the thank button
AbuSundos said:
its really stable working very nice ,fast and sooth
gps is working,i love it
Click to expand...
Click to collapse
ابو سندس كيفك
It's any need to flash A$$ kernel, gps fix zip even sim1 fix zip. or Everything workings good.
Also What about @acharya21 7.1.2 roms (AOKP & Xenon HD )..? Did you gave them a try.?
Which 7.1.2 based rom you prefer.? And really can use it as a daily driver.?
AbuSundos said:
here r ,icons r modified,u can choose urs
regards
Click to expand...
Click to collapse
Thank you ! one more thing to ask , do I need to format my sdcard for moving apps to sd or I can move it without formatting in this rom?
No fix needed
digitman xxx said:
ابو سندس كيفك
It's any need to flash A$$ kernel, gps fix zip even sim1 fix zip. or Everything workings good.
Also What about @acharya21 7.1.2 roms (AOKP & Xenon HD )..? Did you gave them a try.?
Which 7.1.2 based rom you prefer.? And really can use it as a daily driver.?
Click to expand...
Click to collapse
No need to flash any fix or kernel
Everything is working out of the box
This ROM is an update of AOKP from acharya21
Hi Bro the link of rom download is corrupted someone can give me a latest working rom link!!
I will test on my SM-G7102..!!!
Working link
william.alovera said:
Hi Bro the link of rom download is corrupted someone can give me a latest working rom link!!
I will test on my SM-G7102..!!!
Click to expand...
Click to collapse
Link is working find!
it has been review
Try this
https://drive.google.com/file/d/1hHEkDnNqtOF43n0FPpcQSbvKEQYYYLes/view?usp=drivesdk
Does this work on SM-G7105?
Thanks.
william.alovera said:
Hi Bro the link of rom download is corrupted someone can give me a latest working rom link!!
I will test on my SM-G7102..!!!
Click to expand...
Click to collapse
enable cookies
Not TESTED
iSynthesis said:
Thanks.
Click to expand...
Click to collapse
It has no yet be tested
yvesjordan06 said:
It has no yet be tested
Click to expand...
Click to collapse
Bro Thank you so much for this rom everythings perfect included 1080p camera its working officially...keep it up ..:good::highfive:
Nice work! Can you add a charging panel like in xenon ROM? I mean a thin charging line in the top of the screen.
1. Button backlights don't work at all 2. ROM control app crashes when I add any gestures to gesture panel 3. After restart, the round panel shows only 2 icons
hi is this ROM is ROOTED, because i cant not install any banking app....somebody please help me. if i need a stock image someone please upload it for me because i dont know much about stock image file....or how can i pass saftynet in magisk. i tried every possible but no luck. all the universal module .....or please how can i unroot this rom...
waiting for kind support
thanks
Bro the bug is when airphone jack is connected try to restart the phone.. You will experiencing stuckup in boot logo..when airphone jack is diconnected it will restart perfectly..thanks..

Categories

Resources