Code:
[COLOR="green"][B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and no point
* in pointing the finger at me for messing up your device
*/[/B][/COLOR]
This kernel is compiled straight from Xiaomi official released Lollipop sources:
FEATURES:
Supports Lollipop Bootloader
Fast Charge
Vibration intensity control
Schedulers - fiops, sioplus, tripndroid, zen
Governors - lionfish, impulse, despair
Hotplugs - mpdecision, State Helper, Mako, MSM
Double-Tap2-Wake
KCAL support
wlan wake locks toggle support
frandom support
fsync on/off support
zram/zsmalloc optimizations
stock Wifi driver, 3.8.22.14
Exfat/NTFS support
GPU slightly overclocked to 465Mhz (100-465Mhz) [Not applicable to MiUi Kitkat]
CPU unlocked with all frequencies, default max to 1.4Ghz (200Mhz-1.4Ghz) [Not applicable to MiUi Kitkat]
TCP congestion algorithms enabled
Few more internal optimizations
INSTALLATION INSTRUCTIONS:
Download the zip file corresponds to the release and save it into the root directory of internal/external storage
Reboot into recovery
Mount system, data and cache
Flash the zip
If you ever want to revert to Stock MiUI LP, you can flash Stock WiFI zip
For MiUi (for other ROMs too as matter of fact) I would recommend to backup the system & boot, Just in case if you want to revert, you may do so.
Reboot(NO NEED TO WIPE CACHE AND DALVIK)
In MiUi, if you use KA then give Autostart permission so it runs in the boot (SecurityApp->Permissions->Autostart)
Download
All kernel versions are FINAL. As long as long it is supported, kernel will be updated only if it is absolute must
Folder: https://www.androidfilehost.com/?w=files&flid=66952
Cosmos Release For MM/N Jerrica-Cosmos-20170117.zip This is FINAL release
Cosmos Release For MM/N Jerrica-Cosmos-ltr553-20170117.zip Only for those having any issues with proximity sensor/ltr559 This is FINAL release
Cosmos MiUi lollipop Release Jerrica-MI-Cosmos-20161116.zip This is FINAL release
PremierFinale Lollipop Release Jerrica-LP-PremierFinale-20160813.zipThis is FINAL release
PremierFinale MiUi Kitkat Release Jerrica-MK-PremierFinale-20160829.zipThis is FINAL release
If you want to restore to Stock MiUi8 Kitkat Global 8.0.1.0(KHJMIDG)
Restore MiUi8 Stock Kernel (Global 8.0.1.0 (KHJMIDG)) Restore-Mi8KK-Kernel-8.0.1.0_KHJMIDG.zip
Source code: https://github.com/premaca/Xiaomi_Kernel_OpenSource
Cosmos Release For MM/N Brach: cosms
PremierFinale Lollipop Release Branch: Final-LP
PremierFinale MiUi lollipop Release Branch: Final-MI
PremierFinale MiUi Kitkat Release Branch: Final-MK
CREDITS:
Xiaomi for Official Sources
XDA:DevDB Information
JERRICA, Kernel for the Xiaomi Redmi 2
Contributors
premaca
Source Code: https://github.com/premaca/Xiaomi_Kernel_OpenSource
Kernel Special Features:
Version Information
Status: Alpha
Created 2016-06-09
Last Updated 2017-01-17
Reserved
Change Logs
* ALL KERNEL VERSIONS ARE FINAL *
01/17 Cosmos Release for MM/N Roms
* Redid kernel, to avoid potential stability issues
* MSM hot plug is slightly revamped
* For those having issues with LTR559 proximity sensor, separate kernel is released with LTR553 (untested by me)
* Check some headset buttons too, i picked from commit from old kernel
* This would be the last version of Jerrica, unless kernel must be update for some reason.
* Download Jerrica-Cosmos-20170117.zip
Jerrica-Cosmos-ltr553-20170117.zip Only for those having any issues with proximity sensor/ltr559
Cosmos for Marshmallow/Nougat is announced Final
12/24 Cosmos Release for MM/N Roms
* Enabled NF_MATCH_RPFILTER for hotspot requirements on N Roms
* Revamped MSM Hotplug
* other stability fixes
- Download Jerrica-Cosmos-20161224.zip
NOTE: Our ROMs are diverging with different default CPU profiles, like perfd, msm, mpdecision etc. Its your responsibility to make sure what is recommended or what you want to use, and not having redundant or conflict configs.
11/16 MiUi Lollipop Cosmos Release
- Boots latest MiUi 8 Beta ROMs (as of now 1110 latest)
- kexec hard boot is implemented
- Tested Nougat ROMs, internal/external with latest Multirom release for Redmi2 (MiUi as Primary, and Nougat as secondaries)
- Download Jerrica-MI-Cosmos-20161116.zip
MiUi Lollipop Cosmos Release is announced Final
10/23 Cosmos Release
- Initial Release for Nougat
- Compatible for MM as well
- Faux sound is added
- selinux is permissive
- Download Jerrica-Cosmos-20161023.zip
08/29 PremierFinale Release
- MiUi Kitkat release updated.
- Download Jerrica-MK-PremierFinale-20160829.zip
- Bluetooth issue fixed
- DT2W support added
- Also, if you want to restore to Stock MiUi 8.0.1.0(KHJMIDG) , use this Restore-Mi8KK-Kernel-8.0.1.0_KHJMIDG.zip
MiUi Kitkat PremierFinale Release is announced Final
08/20 PremierFinale Release
- MiUi Kitkat is released.
- Download Jerrica-MK-PremierFinale-20160820.zip
- Impulse governor and Dt2W are absent.
08/13 PremierFinale Release
- zram/zsmalloc optimizations
- Stock Wifi Driver for all, 3.8.22.14
- Exfat/NTFS support
- GPU slightly overclocked to 465Mhz (100-465Mhz)
- CPU unlocked with all frequencies, default max to 1.4Ghz (200Mhz-1.4Ghz)
- TCP congestion algorithms enabled (all others)
- Button mappings changed (those who have trouble with headset buttons not changing volume levels, let me know)
- Removed faux-sound (to check if it has anything to do with low-mic-volumes for some)
- Stability fixes
Custom ROMs Lollipop PremierFinale Release is announced Final
07/14 Stable Release 4.0
- wlan wake locks toggle support
- frandom support
- fsync on/off support
- despair governor
- MSM hot plug
07/11
- reverted some optimizations for more stability
- KCAL support
- adb supported added for MiUi7/8
07/05
- v3.1 for MM/LP/MI
- Hotplugs - State Helper, Mako
- zram/zsmalloc optimizations
- More internal optimizations
- proposed FM fix for MiUi7/8 (tested by me only on MiUi7)
- For MiUi, proposed fix for akm09911 driver (not tested by me as i have yas537)
07/02
- v2.1.5 released for MiUi Lollipop
- FM is fixed
- Mi Camera is back with all options enabled
- Common build for MiUi7 and MiUi8
06/29
- v2.1.3 released for MiUi Lollipop
- No longer required to flash separate WiFi zip
- much needed Qcom mp-decision hot plug is enabled
- unused cores are now offline
06/28
- Schedulers - fiops, sioplus, tripndroid, zen
- Governors - lionfish, impulse
- DT2W is now supported for LP and MI kernels too.
- Few Optimizations done.
06/23
- Kernels for MM, LP and MI are updated to v1.7. Check OP for supported features and instructions to flash.
06/13
Kernel for LP is Released -
https://www.androidfilehost.com/?fid=24591020540821594
- camera source are of official stock!
06/12
https://www.androidfilehost.com/?fid=24580943222146864
- Fixed LED Blink
06/10
https://www.androidfilehost.com/?fid=24580943222146251
- Initial Release
Reserved
Yoooo this thread to be needed thanks for thread
is this support lollipop partitions..???
saurabh1234 said:
is this support lollipop partitions..???
Click to expand...
Click to collapse
It may not work on lollipop partitions, I can try and see to fix booting this kernel on L boot loader.
Sent from my Redmi 2 using XDA-Developers mobile app
Great job @premaca !
As always your contribution to the redmi 2 community is valuable.
Thanks again.
can i install it in lollipop based rom
premaca said:
Code:
[COLOR="green"][B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and no point
* in pointing the finger at me for messing up your device
*/[/B][/COLOR]
This kernel is compiled straight from Xiaomi official released Lollipop sources:
FEATURES:
None yet.
Everything is Pure Stock !!
INSTALLATION INSTRUCTIONS:
Download the zip file and save it into the root directory of internal/external storage
Reboot into recovery
Mount system, data and cache
Flash the zip and reboot(NO NEED TO WIPE CACHE AND DALVIK)
Download
Folder: https://www.androidfilehost.com/?w=files&flid=66952
Current Release- v1.1
CREDITS:
Xiaomi for Official Sources
XDA:DevDB Information
JERRICA, Kernel for the Xiaomi Redmi 2
Contributors
premaca
Source Code: https://github.com/premaca/Xiaomi_Kernel_OpenSource
Kernel Special Features:
Version Information
Status: Alpha
Created 2016-06-09
Last Updated 2016-06-09
Click to expand...
Click to collapse
Great work.. Really excited.. Hope it will be perfect.. Going to try
Edit- Sorry.. I'm not used to this reply thing in XDA forums that's why mistakenly quoted the whole thread..
Just flashed the kernel with latest mokee nightly.. Kernel is smooth.. Working really good.. And it solves the issue that was present in kernel's based on kuma's sources.. The slow charging while using 3g data is now solved.. I will request @premaca to keep cooking kernel's with this official lollipop source.. Because it's awesome and no slow charging
[email protected] said:
Great work.. Really excited.. Hope it will be perfect.. Going to try
Click to expand...
Click to collapse
dont tag whole thread
potlapalli1 said:
can i install it in lollipop based rom
Click to expand...
Click to collapse
I have not tried, what ROM based lollipop you use?
Sent from my Redmi 2 using XDA-Developers mobile app
premaca said:
I have not tried, what ROM based lollipop you use?
Sent from my Redmi 2 using XDA-Developers mobile app
Click to expand...
Click to collapse
Got random reboot, will try to catch some logs next time. And count me in for beta test or closed test(if any), if you compile kernel for miui lollipop. Thanks bro.
Venkatesh said:
Got random reboot, will try to catch some logs next time. And count me in for beta test or closed test(if any), if you compile kernel for miui lollipop. Thanks bro.
Click to expand...
Click to collapse
On what ROM you got random reboot? I have not seen any random reboot yet all through the life of bringing this kernel and using so far. Nevertheless its helpful to get log next time.
Thanks for coming forward to help in testing.
Sent from my Redmi 2 using XDA-Developers mobile app
premaca said:
I have not tried, what ROM based lollipop you use?
Sent from my Redmi 2 using XDA-Developers mobile app
Click to expand...
Click to collapse
kumajaya cm12 build but today i updated to cm13 and flashed this kernel. so far it is good no random reboots
Great work @premaca I installed in DU amd I'm quite pleased with the charging,with my one plus charger it's charging quite nicely, the bug that i found so far is that,though the led work's,it doesn't blink.
Once again, Good job for making it compatible for MM ROMs.
saurabh1234 said:
dont tag whole thread
Click to expand...
Click to collapse
Sorry.. @saurabh1234 .. I'm not used to XDA forums.. That's why did that by mistake
s.sawrav said:
Great work @premaca I installed in DU amd I'm quite pleased with the charging,with my one plus charger it's charging quite nicely, the bug that i found so far is that,though the led work's,it doesn't blink.
Once again, Good job for making it compatible for MM ROMs.
Click to expand...
Click to collapse
It's not blinking when notification is there but simply glows? Will check it, Thanks Buddy.
Sent from my Redmi 2 using XDA-Developers mobile app
Camera doesn't work ...it show camera doesn't connect and led on low battery always stayed lightened
premaca said:
It's not blinking when notification is there but simply glows? Will check it, Thanks Buddy.
Sent from my Redmi 2 using XDA-Developers mobile app
Click to expand...
Click to collapse
When notification arrives, the light remains ON , instead of blinking .
---------- Post added at 12:52 PM ---------- Previous post was at 12:50 PM ----------
Aabid sk said:
Camera doesn't work ...it show camera doesn't connect and led on low battery always stayed lightened
Click to expand...
Click to collapse
Camera is working fine brother..Its the Rom problem (i guess you are on arpits build ) & notification light blinking is confirmed
mits619 said:
When notification arrives, the light remains ON , instead of blinking .
---------- Post added at 12:52 PM ---------- Previous post was at 12:50 PM ----------
Camera is working fine brother..Its the Rom problem (i guess you are on arpits build ) & notification light blinking is confirmed
Click to expand...
Click to collapse
Do anyone remember, miui blinks?
Anyway fix will follow in the coming builds.
Will be adding basic extra features slowly too like fast charging, vibration control, dt2w etc.
Sent from my Redmi 2 using XDA-Developers mobile app
Related
Temasek's CM12.1 for Note 4
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
HOWTO INSTALL
Code:
[B][I]Clean Installation[/I][/B]
1. Download the appropriate ROM.
2. Download the appropriate GApps.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1 Flash Kernel (if you use a custom one)
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot Device.
[B][I]Mixed Flash/Update[/I][/B]
1. Download the appropriate ROM
2. WIPE SYSTEM.
3. Flash the ROM in recovery.
3.1 Flash Kernel (if you use a custom one)
4. Flash the GApps.
5. WIPE DALVIK/CACHE (for good measure).
6. Reboot Device.
[B][I]Dirty Flash/Update[/I][/B]
1. Download the appropriate ROM
3. Install the update zip from recovery.
3.1 Flash Kernel (if you use a custom one)
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.
STATEMENT
I started to build Temasek's CM 12.1 Rom for Note 4.
It will strict follow his upstream, i'll not add anything to his base.
I only compile it for Note 4 and optimize it for this.
FEATURES
all builds 20150713+ come with VISION Kernel Base as stock (same patched source but not all features)
BUILD
compiled with GCC 4.9.3 with patches from Linaro and SaberMod
including JustArchi's Optimizations
including Arter97's Optimizations
including Qualcomm's optimized LLVM 3.6 (not Google's 3.5a)
DOWNLOADS ON AFH
latest ROM
GAPPS
Vision Kernel
MDNIE Tuner App
KCAL App
Dolby Digital Plus Mod
Download Rom @ AFH
Download Gapps @ AFH
Download Apps @ AFH
THANKS
Code:
@Senthil360 for nice support in this thread
@CyanogenMod for base
@temasek for rombase
@arter97 for optimizations
XDA:DevDB Information
Temasek CM12.1 / Vision Kernel, ROM for the Samsung Galaxy Note 4
Contributors
AuxXxilium
Source Code: https://github.com/AuxXxilium
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Abandoned
Current Stable Version: v14.9
Stable Release Date: 2015-07-21
Created 2015-07-04
Last Updated 2015-08-13
Vision KERNEL
Vision Kernel for all CyanogenMod 12.1 based ROM
fast - smooth - battery friendly
Optimized for Temasek CM12.1
Features
Hotplug
MpDecision (optimized)
IntelliPlug 4.0
Thermal
My own Thermal Driver (for this time but not the end)
IntelliThermal (CM Version)
CPU
Underclock CPU to 268MHz
Overlock CPU to 2880MHz
Hardlimit CPU Control 2.2.1_Note4
CPU Boost
MSM Turbo (like Intel Turbo Boost - only active if you use the max frequency but will cause more battery drain)
Voltage Control
more CPU Governor
GPU
Underclock GPU to 166MHz
Overclock GPU to 800MHz
Simple GPU Algorithm
Adreno Idler 1.1
Idle down to 27MHz
more GPU Governor
Screen
Touch Control (DT2W, S2W, S2S) <- only t2w edition
State Notifier
FS and I/O
Dynamic Fsync 1.5
more IO Scheduler
Optimized EXT4
F2FS Support
Power
Powersuspend 1.7
Fastcharge 1.2
QuickWakeup
Sound
Faux Sound Control 3.6
MSM Ultrasound
Stereo call recording
Net
more TCP Cong
Misc
KSM
Kernel Mode NEON
SELinux permissive
overall Optimizations
Sabermod 4.9.3 for A15 and graphite
more...
How-To install
remove all bootup settings from Fauxclock
boot into recovery
install kernel
wipe cache (better to do this)
boot system
if system is fully started - restart it again
done
Download Kernel @ AFH
Changelog for ROM / KERNEL
Changelog for ROM
Build Changelog
Changelog for Vision KERNEL
2015.07.16
only performance optimizations
2015.07.15
updated: Hardlimit Control v2.2.1_Note4 by AuxXxilium
2015.07.14
build: start with two version: one with touch2wake and without it
build: cleaner build tags - now only vision not vision_smart
added: Hardlimit Control v2.2_Note4 by AuxXxilium (thx to yank555.lu for base)
2015.07.13_t2w - experimental
readded: touch2wake
removed: IntelliThermal trash for the next time
added: more battery savings
patched: some vidc things
2015.07.11_ofast
recompiled with -Ofast
added: new adreno idler version
2015.07.10
added: quickwakeup
added: some more patches
removed: smart... governor that causes a bug in freq selection
2015.07.08_v2
bugfix build
removed: only gpu wakeup on touch event
removed: all touch2wake features for now
removed: high OC Freq (now max is 2.88 GHz)
fixed: no touch response after wakeup from deepsleep (i hope)
fixed: the laggy performance from gpu if there was no touch event
fixed: fastcharge issue that causes some problems (slow charging and more)
fixed: all kernel compile warnings
added: elementalx cpu gov for more performance
added: more optimizations
added: Async Fsync
2015.07.07
added: IntelliThermal from faux123 (CyanogenMod Commit)
added: some patches for power efficiency
added: more patches - to many to list all things
2015.07.06
added: Simple GPU Algorithm
added: MDNIE Control
added: some GPU Patches
2015.07.05
initial push with features above (optimized for my rom)
FAQ
How can i set the kernel features?
The recomend app is FauxClock. Other apps can have problems with cpu freq setting or other features.
Fauxclock isn't supported.
Install Fauxclock > Open and accept SuperSu > force close it > open again (if this isn't working, you need to fix permissions.)
Why i do this? ETA's?
It's only build for my own use, so i update it if i think i must do it. Please do not ask for ETA's.
Misc
Known bugs
If you found a bug, please submit it here.
Feature Requests
If you want to have a new Feature, please submit it here.
Reviews
If you like my work, please say THANKS and write a short review here.
Rom support
Does this ROM support 910G
ROM
AuxXxilium said:
Temasek's CM 12.1 for Note 4 (trltexx)
Code:
I started to build Temasek's CM 12.1 Rom for Note 4.
It will strict follow his upstream, i'll not add anything to his base.
I only compile it for Note 4 and optimize it for this.
Download
Huge thanks to @temasek and @arter97
XDA:DevDB Information
Temasek's CM 12.1, ROM for the Samsung Galaxy Note 4
Contributors
AuxXxilium
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: v14.5
Stable Release Date: 2015-07-04
Created 2015-07-04
Last Updated 2015-07-04
Click to expand...
Click to collapse
Downloading the ROM, will give more feedback after a few hours.
Keep up the great work, loving your kernel and now maybe this ROM as well.
Sent from my SM-N910F using XDA Premium 4 mobile app
virgoan said:
Does this ROM support 910G
ROM
Click to expand...
Click to collapse
yes. 910G is supported. it is working with trlexx rom.
Battlehero said:
Downloading the ROM, will give more feedback after a few hours.
Keep up the great work, loving your kernel and now maybe this ROM as well.
Sent from my SM-N910F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks, kernel comes back the next week. try to fix benchmark scores and game performance.
Thanx for thread,I think your kernel and temasek rom is perfect combination???
AuxXxilium said:
yes. 910G is supported. it is working with trlexx rom.
thanks, kernel comes back the next week. try to fix benchmark scores and game performance.
Click to expand...
Click to collapse
Current bug: Clicking Ambient Display causes Force Close?
Everything else seems to work fine so far, will report back if I find something else.
@AuxXxilium : this is great. I was a very big fan of temasek for S3 and I was thrilled when I saw your post. Thanks. The issue that I have is that it seems I am limited with 3g speed after I have installed the rom. I cannot get more than 47kB / sec no matter what I do. Before installing the rom , exactly in the same place, I was having over 1,5 MB / sec. Does anyone have the same issue? Thanks
Trimis de pe al meu SM-N910F folosind Tapatalk
Great, now we have two Temasek CM12.1 roms for our device Gonna test this one too.
Welcome Temasek! I used your ROMs on the Note 3....good to see you here buddy
Does s pen features work with this ROM
ivnn said:
Does s pen features work with this ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/software/app-app-samsung-devices-provided-stylus-t3000448
Sent from my SM-N910F using XDA Premium 4 mobile app
rhadoo_ds said:
@AuxXxilium : this is great. I was a very big fan of temasek for S3 and I was thrilled when I saw your post. Thanks. The issue that I have is that it seems I am limited with 3g speed after I have installed the rom. I cannot get more than 47kB / sec no matter what I do. Before installing the rom , exactly in the same place, I was having over 1,5 MB / sec. Does anyone have the same issue? Thanks
Trimis de pe al meu SM-N910F folosind Tapatalk
Click to expand...
Click to collapse
In case someone else has the same issue...
I found that the default access point was WAP instead of Internet, this was limiting the speed. After I switched to Internet, speed was over 1,5 MB.
Just tried to install the ROM ,but the installation was aborted complaining that this image is for a trltexx and that I'm having a trlte . I think i installed different kernel for my previous Rom . Could anyone suggest what i have to do to change it to trltexxx .
ivnn said:
Just tried to install the ROM ,but the installation was aborted complaining that this image is for a trltexx and that I'm having a trlte . I think i installed different kernel for my previous Rom . Could anyone suggest what i have to do to change it to trltexxx .
Click to expand...
Click to collapse
You have the incorrect recovery.
Install the correct recovery from TWRP's website.
If you have N910F (Trltexx) install this zip from recovery and then reboot to recovery again to install the ROM.
https://dl.twrp.me/trltexx/twrp-2.8.7.0-trltexx.zip.html
Sent from my SM-N910F using XDA Premium 4 mobile app
i tried to install but device got struck in download mode and i couldnt boot normal as well. odin is not recognising the device as well
Battlehero said:
You have the incorrect recovery.
Install the correct recovery from TWRP's website.
If you have N910F (Trltexx) install this zip from recovery and then reboot to recovery again to install the ROM.
https://dl.twrp.me/trltexx/twrp-2.8.7.0-trltexx.zip.html
Sent from my SM-N910F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Awesome! Temaseks rom was my favorite rom on my s3.
too bad I really need the s-view, which isn't working on CM
will that ever be possible?
ivnn said:
i tried to install but device got struck in download mode and i couldnt boot normal as well. odin is not recognising the device as well
Click to expand...
Click to collapse
Take your phone's battery out. (Make sure device isn't plugged in anywhere)
Then put the battery back in after 10 seconds.
Then hold the volume down, home button and power your device on.
Then plug your phone into your computer, and try different USB ports (Make sure Kies is not installed) and flash a stock ROM via Odin and start a fresh.
Install a custom recovery (TWRP).
Sent from my SM-N910F using XDA Premium 4 mobile app
Mikeyman123 said:
Awesome! Temaseks rom was my favorite rom on my s3.
too bad I really need the s-view, which isn't working on CM
will that ever be possible?
Click to expand...
Click to collapse
sview hack is in rom included, the next kernel version does enable it. so i think it should work after that, but i havn't a sview cover for my phone. so i can't try it out.
ALIZE KERNEL FOR STOCK/NOUGAT
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is the thread for the Oreo variant ALIZE KERNEL FOR OREO :good:
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.89) compiled with Linaro-7.2
Boeffla Wl Blocker
Maple I/O sched
Frandom for random number
Wakeup boosted (time in milliseconds instead of seconds)
CRC check disabled (Performance boosted)
Vibration control
Sound control
Kcal support
Backlight dimmer
Fsync support
Safetynet patch
Makefile: -0fast, -O3 and Graphite optimizations
LZ4 compression (instead of XZ)*
Faster boot (higher read_ahead size for bootup)
All feature of the boulzordev's kernel
Many other tweaks (check github)
Some of these features is not yet added in the Stock variant.
Click to expand...
Click to collapse
Download (Nougat LOS-AOSP based)
**Nougat(V42 - WITH NEW GESTURES ONLY)**
Download: https://sourceforge.net/projects/alize/files/Nougat/AlizeR-7.x_v42.zip/download
Changelog: https://github.com/Martichou/alize_potter/commits/a7x
Click to expand...
Click to collapse
**Stock(V110)**
Download: https://sourceforge.net/projects/alize/files/Stock/Alize-stock_v110.zip/download
Be careful, stock variant will ONLY work on very LASTEST version of the ROM.
See below
Some known version which work:
- Retus: 137-83
- Retin: 137-67-5
- Retmx: 137-78-4
- Stock deodexed
But these are not exhaustive!
This one don't work:
- Retus: 137-43-5
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
*Learn more about LZ4
- https://events.linuxfoundation.org/sites/events/files/lcjpcojp13_klee.pdf
- http://catchchallenger.first-world.info/wiki/Quick_Benchmark:_Gzip_vs_Bzip2_vs_LZMA_vs_XZ_vs_LZ4_vs_LZO
TELEGRAM GROUP:
https://t.me/joinchat/EWMwLkNn0rIRNNctA75U3A
Credits:
Lineage Team
Acuicultor
Vache (for source and Oreo, and so many things)
fAiyaZ (for upstreamed the kernel from .32 to .61 and more things)
And many other.. (PM if you want me to add you.)
XDA:DevDB Information
ALIZE, Kernel for the Moto G5 Plus
Contributors
Martichou
Source Code: https://github.com/Martichou/alize_potter/
Kernel Special Features:
Version Information
Status: Stable
Created 2017-11-06
Last Updated 2017-12-24
As there aren't any official Oreo roms for this model I assume your kernel works with Lineage 15
Good work bro
Muchoaliento said:
As there aren't any official Oreo roms for this model I assume your kernel works with Lineage 15
Click to expand...
Click to collapse
There is lots of Oreo rom available.
Between this thread is only for Nougat or Stock rom.
And yes, my Oreo variant work on LOS15.
Good kernel bro .Keep it up
Witch one is needed for Validus rom latest version?
cdfreak said:
Witch one is needed for Validus rom latest version?
Click to expand...
Click to collapse
If it's Oreo, then there is the other thread.
If it's nougat, take the nougat version.. you're not on stock so it's not difficult to know.
I switched from Androidfilehost to Sourceforge as some users faced lots of bugs with AFH.
New build is up! (ALIZE KERNEL - Potter)
*General changes:*
- Upstreamed to .81
- Switch for GENTLE_FAIR_SLEEPERS
- Check github for more
**Nougat (V44 without new gestures)**
https://sourceforge.net/projects/alize/files/Nougat/Alize-7.x_v44.zip/download
**Nougat (V44 with new gestures)**
https://sourceforge.net/projects/alize/files/Nougat/Alize-7.x_v44_gestures.zip/download
Are u going to keep updating?
fr3d0x said:
Are u going to keep updating?
Click to expand...
Click to collapse
join the telegram group - He is working all the time
how to recompile this kernel after upstream... i had successfully upstream the kernel source with latest patches and few fixes...
now i need to compile it for moto g5 plus..
please help me and give full proceedure to perform this operation. Thankyou
I just started using latest aokp. How would I know if it has "new Gestures"?
Sent from my XT1687 using Tapatalk
buggerritt said:
I just started using latest aokp. How would I know if it has "new Gestures"?
Sent from my XT1687 using Tapatalk
Click to expand...
Click to collapse
It has
New build is up !
Rebased
V42
https://sourceforge.net/projects/alize/files/Nougat/AlizeR-7.x_v42.zip/download
OP requested thread to be closed.
EXTENDED STOCK OREO KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: THIS KERNEL IS FOR STOCK OREO ROM ONLY
PLEASE MAKE A BACKUP OF YOUR STOCK KERNEL FIRST
This kernel is for STOCK OREO ROM ONLY !
This Kernel aims to use the best and most stable feautures of stock kernel by default and add useful features and optimizations,The idea is to keep it simple, stable and optimized.
The features Are :
Updated to Latest Motorola Oreo Kernel Sources
Updated to Latest Caf Sources - Tag: "LA.UM.6.6.r1-10400-89xx.0"
Updated to Latest Linux-Stable Sources "3.18.136"
Built with -O2 Optimization
Any Kernel Installer Script
Compiled Using Google Toolchain 4.9
Added More TCP Congestions Controls
Added Wakelocks Blocker
Added Sound Control
Added KCAL Color Control
Added K-Lapse
Added Backlight Dimmer
Added Adreno Boost
Added Fsync Control
Added Software CRC Control
Added Wake Gestures
Optimized For Faster Bootup
Added Sys Interface To Control Vibration Intensity
Set "androidboot.verifiedbootstate=green" To Pass SafetyNet
Some Tweaks and Optimizations
DOWNLOAD
EXTENDED STOCK OREO KERNEL REV-5
Use the app EXKM or kernel adiutor to tweak the kernel!
XDA:DevDB Information
EXTENDED STOCK KERNEL, Kernel for the Moto G5 Plus
Contributors
attack11, attack11, flar2 franciscofranco sultanxda
Source Code: https://github.com/attack11/kernel-msm
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-08-29
Beta Release Date: 2018-08-25
Created 2018-08-25
Last Updated 2019-03-15
Reserved
Hi all,First release of extended kernel for stock oreo (soak twrp is the only rom availeable for now of course) , Please backup your system and boot partition and also backup your data just in case!
Wow so fast
I have a very good kernel, I am very fast on the stock OPS 28.85-10, how do I activate the 2-touch switch to wake up?
fer198309 said:
I have a very good kernel, I am very fast on the stock OPS 28.85-10, how do I activate the 2-touch switch to wake up?
Click to expand...
Click to collapse
You can activate the wake gestures with an app like Kernel adiutor or ex kernel manager :good:
Moto Action (chop chop for flashlight, twist for camera) not working, other than that everything working fine.
ShameemGuyin said:
Moto Action (chop chop for flashlight, twist for camera) not working, other than that everything working fine.
Click to expand...
Click to collapse
It's working fine for me,what version of the soak test are you using?
OPS28.85-10
I've clean flashed the rom and kernel again, now it's working fine. Thank you for your great work.
Is Oreo based kernel sources out for G5 Plus?
ShameemGuyin said:
OPS28.85-10
I've clean flashed the rom and kernel again, now it's working fine. Thank you for your great work.
Click to expand...
Click to collapse
Nice to know that works fine!
shanks125 said:
Is Oreo based kernel sources out for G5 Plus?
Click to expand...
Click to collapse
I'm using moto g5s plus Kernel sources,there won't be much differences with our sources,moto keeps the same sources from a lot of their devices
# KERNEL UPDATED !
- Rebased to Latest Caf Sources - Tag: "LA.UM.6.6.r1-09600-89xx.0"
- Rebased to Latest Linux-Stable Sources from "3.18.74" > "3.18.120"
- Built with -O2 Optimization
- Added Adreno Boost
- Disable All The Tweaks By Default
DOWNLOAD
EXTENDED STOCK OREO KERNEL REV-2
Hope To See Some FeedBacks!
anyone know tell me if functional tv with this kernel?
Potter XT1683
attack11 said:
# KERNEL UPDATED !
- Rebased to Latest Caf Sources - Tag: "LA.UM.6.6.r1-09600-89xx.0"
- Rebased to Latest Linux-Stable Sources from "3.18.74" > "3.18.120"
- Built with -O2 Optimization
- Added Adreno Boost
- Disable All The Tweaks By Default
DOWNLOAD
EXTENDED STOCK OREO KERNEL REV-2
Hope To See Some FeedBacks!
Click to expand...
Click to collapse
With the previous kernel in soak test I was marked without sim card when restarting the cell phone with this new version of the kernel no longer does, thanks for your work:highfive:
Thanks for the update working great.
JC Pzy said:
With the previous kernel in soak test I was marked without sim card when restarting the cell phone with this new version of the kernel no longer does, thanks for your work:highfive:
Click to expand...
Click to collapse
Same !! I thought i was the only one with this issue mow working fine in v2
robalbino said:
anyone know tell me if functional tv with this kernel?
Potter XT1683
Click to expand...
Click to collapse
If works with stock kernel,should work with this one
sinchan_nohara said:
Same !! I thought i was the only one with this issue mow working fine in v2
Click to expand...
Click to collapse
JC Pzy said:
With the previous kernel in soak test I was marked without sim card when restarting the cell phone with this new version of the kernel no longer does, thanks for your work:highfive:
Click to expand...
Click to collapse
Happen to me sometimes,Even with stock kernel,So i guess its just random
attack11 said:
If works with stock kernel,should work with this one
Click to expand...
Click to collapse
I tested V2 Potter xt1683 kernel and does not work tv model brazil, I would like to use the kernel more, do not take tv, have to fix it so that it works?
Loving having kcal back for use with CF.lumen, one of the key reasons to keep my phone rooted.
Code:
*** Disclaimer ***
I am not responsible for bricked devices, dead SD cards,
thermonuclear war or you getting fired because the alarm
app failed. Please do some research if you have any
concerns about features included in this Kernel before
flashing it! YOU are choosing to make these modifications,
and if you blame me in any way for what happens to your
device, I will laugh at you.
* BOOM! * goes the dynamite. :D
Introduction
Hello everyone, this is my personal kernel for the Poco(phone) F1.
First-off, I am not a superstar kernel developer, I'm just trying to build a kernel out of clean AOSP/LOS sources that has only the necessary features without bloating it with unnecessary stuff.
TL;DR
This Kernel is going to be a combination of Clean Source + Awesome Features of other kernels out here (NOTE: If there's something cool, maybe I'll be cherry-picking it. :silly:
Goal: Achieve Max. Performance and Balance Battery Life with Stability in mind.
Hopefully you'll enjoy!
THE KERNEL IS IN IT EARLY STAGES, WITHOUT MUCH FEATURES. MORE OPTIMIZATIONS AND FEATURES COMING!
Note: Ported ROMs like OOS and MiRoom are know to have issues and isn't supported by me!
Click to expand...
Click to collapse
Features
- Built with latest Clang using -O3 optimization flag
- Using CONFIG_HZ = 300 (there by changing context switching interval from 10ms to 3.33ms for fewer jitters)
- Upstreamed to latest Linux Stable (4.9.211)
- Fully merged latest CAF Tag (LA.UM.8.3.r1-07100-sdm845.0)
- Google Common Kernel Commits cherry-picked
- Picked changes from Xiaomi's source
- Latest CAF Audio & Wi-Fi drivers
- Latest (or best) Xiaomi Touch Drivers (NVT:9.1.24 / FTS:10.3.7.0) (You are free to suggest if something else is better)
- Enabled ULPS (Ultra Low Power State) for panels
- Using Power Efficient Workqueue
- Scheduler Stune Boost
- GPU UC to 180MHz & OC to 820MHz
Available GPU Freq.: [180], 257, 350, 425, 520, 600, 675, 710, [820]
- Enabled NAP power saving state for Adreno 630 GPU
- Added TCP Cong. Alg.: [westwood], bic, vegas, yeah, illinois
- Added fsync on/off support
- Added support for DTS Ultra:X
- Camera fix (for Q-Blobs)
- Added Wireguard support (latestL 0.0.20200128)
- Added TTL Tethering Fix (ziozzang)
I'll consider your feature requests if you share a commit / kernel that has the feature.
Other suggestion to make the kernel beter are welcome too..
Consider joining the Telegram Group (where I am most active). [The group is very new and empty as of now]
The Kernel will receive regular updates whenever there's new Linux Stable / CAF Tag.
Installation Instructions
* Dirty Flash your current ROM zip (IMPORTANT if you are coming from another kernel)
* Flash Kernel zip
* Wipe Cache / Dalvik (optional)
Download
Download Delta Kernel
FAQ
Q. Which ROM/Android Version does it support?
A. It is tested and works on any Android 10 ROM.
(Haven't tested on OOS, but it should work)
Click to expand...
Click to collapse
Thanks To
* nathanchance - for android-linux-stable
* osm0sis - for AnyKernel3
* every single Kernel Developers (Poco especially) that I might have/will be cherry-picked(ing) from.
XDA:DevDB Information
Delta Kernel, Kernel for the Xiaomi Poco F1
Contributors
StaticBlaze
Source Code: https://github.com/P1N2O/android_kernel_xiaomi_sdm845
Kernel Special Features:
Version Information
Status: Beta
Created 2020-01-30
Last Updated 2020-01-30
XDA:DevDB Information
Delta, Kernel for the Xiaomi Poco F1
Contributors
StaticBlaze
Source Code: https://github.com/P1N2O/android_kernel_xiaomi_sdm845
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v0.3
Beta Release Date: 2020-02-06
Created 2020-01-31
Last Updated 2020-02-06
Support miui interface please?
تم الإرسال من POCOPHONE F1 باستخدام Tapatalk
al.iraq said:
Support miui interface please?
تم الإرسال من POCOPHONE F1 باستخدام Tapatalk
Click to expand...
Click to collapse
Working in miui eu based rom ..
Camera not working on latest evo x
revos stable like charm..
Batsy538 said:
Camera not working on latest evo x
Click to expand...
Click to collapse
I've patched Xiaomi's (Q-Blobs) camera fix as all other ROMs will start using Q firmware soon (some ROMs are already using)
If you will add wakelockblock consider pls to add ipa_rm12 to blocklist
spoin64 said:
If you will add wakelockblock consider pls to add ipa_rm12 to blocklist
Click to expand...
Click to collapse
Sure. I'll consider adding it in future versions..
[MINOR UPDATE] Delta Kernel v0.2
Changelog:
- Merged latest Linux Stable 4.9.212
- Merged Latest CAF Tag LA.UM.8.3.r1-07200-sdm845.0
- Added KCAL & K-Lapse v5.0
- Possible Network Signal Guru App fix (might need testing)
- Possible Network Speed showing 0.0Kbps on EU ROM. (might need testing)
Download v0.2 (with camera patch)
Download v0.2 (without camera patch)
al.iraq said:
Support miui interface please?
تم الإرسال من POCOPHONE F1 باستخدام Tapatalk
Click to expand...
Click to collapse
It does work if it is Android 10
hi dev, appreciate your work.
actually i have problem in miroom, cant do fast charge.
any suggestions ?
oh one thing, i got 39 40 degrees while using only social media.
overall, this kernel is beast !!!!
Hutabarat said:
hi dev, appreciate your work.
actually i have problem in miroom, cant do fast charge.
any suggestions ?
oh one thing, i got 39 40 degrees while using only social media.
overall, this kernel is beast !!!!
Click to expand...
Click to collapse
Well, a fix is coming in the next version..
Thanks for the feedback :good:
is this kernel related to malakas
1ey3d0wl said:
is this kernel related to malakas
Click to expand...
Click to collapse
Nope. None..
Related only to AOSP :good:
@StaticBlaze this happens on the latest build
Miui pie supported ??
Allen_05 said:
@StaticBlaze this happens on the latest build
Click to expand...
Click to collapse
Ignore this.
1ey3d0wl said:
Miui pie supported ??
Click to expand...
Click to collapse
As mentioned by the OP is title it supports Android 10. But you can try flashing it and tell if it works for Pie. Just have a backup of your stock boot.img to flash if the zip causes your phone to bootloop.
Allen_05 said:
@StaticBlaze this happens on the latest build
Click to expand...
Click to collapse
Will be fixed in the upcoming version
Link not working
Welcome to Quantic a Kernel built specially for Redmi k30 PRO/ POCO F2 Pro codename: lmi
One of the most used kernel on Custom ROMS on Cepheus chosen by developers and one of the most battery friendly on Redmi k20 Pro community
/* I'm not responsable for any damage on your device, for X or Y reason, also I'm not responsable if you loose your alarm and got fired and also the thermonuclear war, anything like that, installing this kernel you renounce to make me responsable of any unwanted behavior of your device */
/*Compatible ONLY with Android 10*/
Hi everyone, I want to introduce you my new kernel named Quantic-Kernel, this is my personal build kernel with my prefered features. Hope everyone enjoy it and I'll be maintaining it so people can used it with their preferred AOSP ROM(See details below)
FEATURES
Upstreamed CAF to: LA.UM.8.12.r1-10600-sm8250.0
Fixed Camera not working on AOSP ROMs
Reduced logging events
Performance Improvements on scheduler
Enabled ZRAM up to 2GB with lz4 compressor
Upstreamed lz4 compressor
readahead optimizations
Android Binder tweaks
Optimized memory allocations
Reduced kernel weight
Deactivated CAF CPU Boost following MIUI stock kernel parameters
FIX CPU Capacity issues
INSTALLATION PROCEDURE
Make a TWRP backup of BOOT and DTBO partitions
Flash Quantic-Kernel_rX.zip
Reboot to system
Enjoy it
BUGS:
Hostpot may be broken
Works only on ROMS with firmware 12.0.4.0 (check details on Github release)
DOWNLOAD HERE
https://github.com/KONA-DEVS/kernel_xiaomi_sm8250/releases/tag/r2
TELEGRAM CONTACT
https://t.me/Ayrton990 <-- Personal TG
https://t.me/aicplmi <-- Discussion group for support
Thanks List
To kdrag0n
To Kerneltoast
To alk3pInjection
ATTENTION: This KERNEL is NOT based on HiiraKernel, is in construction since early October when I bought the device
SCREENSHOTS ATTACHED BELOW
XDA:DevDB Information
Quantic Kernel, Kernel for the Redmi K30 Pro
Contributors
Ayrton990
Source Code: Github KONA-DEVS
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: r2
Beta Release Date: 2020-11-29
Created 2020-11-22
Last Updated 2020-11-29
Reserved
Another reserved
Hostpot may be broken => I'm waiting when it finish !!!
svzodiac said:
Hostpot may be broken => I'm waiting when it finish !!!
Click to expand...
Click to collapse
what do you mean with that?
Ayrton990 said:
what do you mean with that?
Click to expand...
Click to collapse
BUGS:
Hostpot may be broken => I'm waiting for the stable version
PE Plus - stuck on POCO Logo. Still better this than crashing after boot ;D
Edit: Also if some apps stopped working (showing content) for ya just clear data of Android System WebView
Deleted
@Ayrton990: Awesome! Could you add Wireguard support, please?
Finally a kernel for this device, thanks for this man. I hope we get more kernels and MIUI/Android 11 support.
svzodiac said:
BUGS:
Hostpot may be broken => I'm waiting for the stable version
Click to expand...
Click to collapse
Yeah but the way you wrote it seems to be little rude
grt67DFqyu said:
@Ayrton990: Awesome! Could you add Wireguard support, please?
Click to expand...
Click to collapse
Yes it will be added next update
Thank you for your work！！！Will you consider supporting lineageos？
will you add kcal support & fsync toggle?
Camera does not work in c.droid after kernel
Derepinar said:
Camera does not work in c.droid after kernel
Click to expand...
Click to collapse
Crdroid use 12.03......this kernel work on 12.04 base.
This should work for Paranoid Quartz right?
nvm: aospa is based on 12.03
Awesome work! Thanks!
Thank you very much ? i am waiting miui12 and android 11 weakly support. And i am waiting mostly screen oc. Congratulations for fix xiaomi sources ?
how do I know on which version of ROM am I ? I forgot what was my stock ROM was when I was flashing first Xiaomi.eu rom then oneOS rom..