Related
With my Note 22 I used an app called "Galaxy Charging Current". Unfortunately it doesn't work on this phone. With the best charger & cable, the Note 2 showed 1800mA charging. I am looking for an App that would give me similar information with the V10.
Ampere seems to work with the V10:
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
currently using Ampere but getting mixed results
I use GSAM Battery Monitor.
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
I use Battery Monitor Widget Pro. Best I've used so far to monitor battery usage. Haven't actually used it on my V10 but this post just reminded me to install it.
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
istehwin said:
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
Click to expand...
Click to collapse
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Ampere.. been using it for years
Sent from my SM-N9200 using XDA Free mobile app
Ampere actually broke my "Estimated time remaining" under battery & storage settings. Just would sit on "calculating... please wait."
Uninstalled it and it's back to working again.
Sent from my LG-H901 using XDA Free mobile app
Techlyfe said:
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Click to expand...
Click to collapse
correct
istehwin said:
correct
Click to expand...
Click to collapse
So to sum up...
930 on a V10 is "the same" as 1800 on a note 2?
I also came from a note 2 and have been confused as heck trying to figure out if my v10 is charging at a decent rate.
I never have a problem with the oem charger but I was on a car trip and using an external battery pack and also tried plugging in to my car stereo but couldn't figure out how to "read" the charging apps.
Sent from my pretty nifty brand new LG V10
lol... I too came from a Note 2
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Ampere's XDA forum http://forum.xda-developers.com/android/apps-games/app-ampere-charging-meter-t3012890
clockcycle said:
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Click to expand...
Click to collapse
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
porscheoscar said:
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
Click to expand...
Click to collapse
Yes in my experience, the quality of the cable makes a difference. I'm not sure if its the actual thickness or connections. I have a 6 foot braided flat cable that doesn't always fast charge on wall charger, but I have a 3 foot flat that does in the car. When I use my better cables it works every time.. I don't know if length makes a difference.
Yes, when I was using my Samsung Note 2 and an app called Galaxy Charging Current you could see the difference in mA. Using an Anker charger and a good cable got it up to 1800mA. It is harder to find longer cables that do not produce a loss. The quality of the conductor (metal /copper) shows up here. I wish that "Galaxy Charging Current" worked on the LG V10.
Sent from an AT&T LG V10
Try ampere... https://play.google.com/store/apps/details?id=com.gombosdev.ampere
Sent from my LG-H901 using Tapatalk
i use this cable by Zikko 1.5m long and max my note 2 with 1800mA. Also the cable works great with LG v10 and support Fast charging. Not only that the quality of the cable is superb. i broke one when my phone fell during charging and it landed on the the bottom first causing the micro usb from cable crooked. beside that the cable is great. http://www.hersheng.com/sites/default/files/1403253142.jpg
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
The charger that came with mine is a fast charge charger. It shows fast charge when I plug it in.
The charger that comes with does indicate quick charging when I plug it in to it.
But the car charger that I purchased that claims quick charging support does not indicate quick charging when I plug it in.
Was looking for others experience to decide if I should return and complain.
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
It does..i bought a quick charger for my htc one m9 before and it shows the fast charging when i tether the v10 to it
The phone will detect if it will quick charge when connected to a QC 2.0, you don't get a QC when you plug it in instantly, it will also depend on how much power you already have in the phone.
Aukey is a authorized with QC 2.0 and is listed in Qualcomm site.
I've got the power..
stevenlong said:
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
Click to expand...
Click to collapse
thedrizzle said:
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
Click to expand...
Click to collapse
RDI said:
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
What RDI said.
"Quick Charge" is not "Fast Charge" or "Adaptive Charge" - All of my 2.4amp Fast Chargers do not charge the G4 or v10 any faster than an old iphone power cube. YMMV
The V10 is Quick Charge qc (Qualcomm) 2.0.
There are already a couple of threads on the subject. here and here
@ZEROLEMON_OFFICIAL makes one of the best IMHO. Anker, Aukey/Tronsmart, and Motorola Turbo Chargers have qc 2.0 compatible ones. (always a sale on groupon or slickdeals)
Our phone, like the LG G4 switches to Quick Charge when the main screen is off. And tones it down to standard charging speed if you have the main screen on. The v10 Quick Charges at about 2850mA, slightly faster than the G4 at 2000~2200mA, but slower than the Nexus 6 at 2700~3200mA.
Attached are results by CoNsPiRiSiZe on this AT&T variant, and mine on Tmobile variant. Also included is my USB Doctor Sleeve using a Motorola Turbo Charger plugged into the v10 with screen off.
I am using the Samsung adaptive car charger while driving and it shows fast charging on the lockscreen
Sent from my LG-H961N using Tapatalk
Turns out I had a bad aukey charger, I bought another for my wife and it works fine, show quick charge.
Returning the bad one and getting another.
@clockcycle how are you able to measure current using ampere with display turned off?
BurtGummer said:
@clockcycle how are you able to measure current using ampere with display turned off?
Click to expand...
Click to collapse
I have paid version with notificaion ebabled. But you can run it, leave phone alone so it can meassure. Then turn on screen and screenshot results. It takes a few seconds before it drops or remeassures.
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
adambean said:
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
Click to expand...
Click to collapse
QC 2.0 allows up to a maximum of 3A of current. Every QC 2.0 enabled device will vary slightly in how much power they can draw due to internal circuitry. The V10 charges at about 2.85A as shown by Clockcyle so yes, a QC 2.0 charger will charge faster than a standard 2.1A charger.
Excellent, thank you! Going to pick up some of them now then.
Has any tried charging honor 5x with 2amp charger??
How much time does it took to charge fully..??
With stock 1amp it took 3hrs to charge fully....as i know snapdragon 615 nd 616 support quick charge 2.0...can it be utilized with 2amp charger??
Sent from my KIW-L22 using Tapatalk
Good question. . I have a Qualcomm 2.0 fast charger at home, I'll plug mine into it and check the input
paoloroeseke said:
Good question. . I have a Qualcomm 2.0 fast charger at home, I'll plug mine into it and check the input
Click to expand...
Click to collapse
See how much it takes from 5% to 100%..[emoji41] by the way which honor 5x u have KIW-L22 or KIW-L24 ??
Sent from my KIW-L22 using Tapatalk
I dont understand what quick charge does exactly. If i have a charger that puts out 3 amps at 5 volts and the battery is 3000 mAh then it should take about an hour to charge if its completely drained. That the basic rule for 1C charging rate for lithiums right? so does the qualcomm charger deliver higher that 1C rates?
It doesn't actually work that way which would be bad for the battery, they charge faster when the battery is low and slow down as its fuller or reach a certain temperature.
As for Qualcomm quick charge, it works a bit different than the USB standard. I'm still not clear on the whole thing, but this is what I gathered:
Quick Charge 3.0
3.2v - 20v dynamic, 200mV increments
Up to 3A
Snapdragon 820, 620, 618, 617, and 430
Quick Charge 2.0
5V / 9V/ 12V
Up to 3A
Snapdragon 200, 400, 410, 615, 800, 801, 805, 808 and 810
-
5V/2A, 9V/2A, 12V/1.67A
Quick Charge 2.0 Class A can provide up to 24 watts over a micro USB connector, 36 watts with a Type-C connector, and Class B can reach 60 watts or more.
Quick Charge 1.0
5V, 2A
Snapdragon 600
This is the rating for one 19.5W QuickCharge 3.0 wall charger:
Output (Type-C Quick Charge 3.0 Port): 3.6-6.5V/3A, 6.5-9V/2A, and 9-12V/1.5A
eksasol said:
It doesn't actually work that way which would be bad for the battery, they charge faster when the battery is low and slow down as its fuller or reach a certain temperature.
As for Qualcomm quick charge, it works a bit different than the USB standard. I'm still not clear on the whole thing, but this is what I gathered:
Quick Charge 3.0
3.2v - 20v dynamic, 200mV increments
Up to 3A
Snapdragon 820, 620, 618, 617, and 430
Quick Charge 2.0
5V / 9V/ 12V
Up to 3A
Snapdragon 200, 400, 410, 615, 800, 801, 805, 808 and 810
-
5V/2A, 9V/2A, 12V/1.67A
Quick Charge 2.0 Class A can provide up to 24 watts over a micro USB connector, 36 watts with a Type-C connector, and Class B can reach 60 watts or more.
Quick Charge 1.0
5V, 2A
Snapdragon 600
This is the rating for one 19.5W QuickCharge 3.0 wall charger:
Output (Type-C Quick Charge 3.0 Port): 3.6-6.5V/3A, 6.5-9V/2A, and 9-12V/1.5A
Click to expand...
Click to collapse
Thanks for the info eksasol.. I guess I was just being simplistic. I always think of battery charging in terms of hobby remote control chargers for lipo's. True, the charger (or phone) must have built in circuitry to ramp up the amperage it delivers according to what it considers to be safe/efficient. It would slow down as it came up to it full voltage. Ive never really worried about it much since i just plug it in at night and get through the day without needing a recharge. Years ago in RC you could buy batteries that could handle 2C and above charging rates pretty easily. I would imagine that number has increased. I figured phone batteries would essentially be the same.
Kounjula Rahul said:
Has any tried charging honor 5x with 2amp charger??
How much time does it took to charge fully..??
With stock 1amp it took 3hrs to charge fully....as i know snapdragon 615 nd 616 support quick charge 2.0...can it be utilized with 2amp charger??
Sent from my KIW-L22 using Tapatalk
Click to expand...
Click to collapse
I did not actually use the supplied 1A charger, but with a standard 1A charger it takes all night.
My tablet 2A charger is way faster (a few hours maybe), honestly I did not take note of the time.
I will try that.
The charger circuit will take care of it, no matter the available current, because tension is fixed to 5V so resulting current will be what the circuit handles.
Not sure about a quickcharge 2.0 charger, don't have one.
idk why i read that it takes them atleast 4-6 hours to fully charge their battery? ehh in an hour mine goes from 6% to like 67% and then the other 30 mins and its done and full. and im just using the charger and cable that came with the phone.
paoloroeseke said:
Good question. . I have a Qualcomm 2.0 fast charger at home, I'll plug mine into it and check the input
Click to expand...
Click to collapse
You did try your Qualcomm 2.0 fast charger adapter ?
I'm using mine with samsung fast charger (the one that came with my note5) and it charges from 70%-100% in 19mins...according to GSam app
htc fan89 said:
I'm using mine with samsung fast charger (the one that came with my note5) and it charges from 70%-100% in 19mins...according to GSam app
Click to expand...
Click to collapse
At that rate (30% in 20 min), it should take around 60 min to reach 80% and (80 min) 1hr 20 min to Fully Charge with that charger.
I swear the original reviews said it took around 2 1/2-3 hrs to charge overnight.
I have to say I have NEVER had a phone last as long as this phone does! The battery lasts forever no matter what I do.
cyrusalmighty said:
At that rate (30% in 20 min), it should take around 60 min to reach 80% and (80 min) 1hr 20 min to Fully Charge with that charger.
I swear the original reviews said it took around 2 1/2-3 hrs to charge overnight.
I have to say I have NEVER had a phone last as long as this phone does! The battery lasts forever no matter what I do.
Click to expand...
Click to collapse
I haven't manage to kill it yet, but it should take 1hr30mins to fully charge maybe less. That's with a fast charger
Sent from my KIW-L24 using Tapatalk
I keep wanting to test how long a full charge takes, using my intelligent Anker charger. I never get the chance. The phone battery life is simply outstanding. This is like my 8th smart phone, and simply blows the rest out of the water. I even have the EUMI battery saving features turned off. A 50% charge can takes about an hour. Old habits of always plugging it in when in the car or my desk means that I can forget about plugging it in at night. Don't worry about battery life or fast charging - they are non issues.
No QC2
I have tried two different adapters that are QC2 compatible (and work fine with Galaxy Note 4) with USB voltage measurement device; all I can get is 5V and 1A max even when the battery charges from 20% on.
So, no go on QC2
Also tried QC2.0 charger. No fast charging. However, Ampre, does report that it manages to pull 1.3A from the variable amperage ports i have.
I finally got my battery down to 0%. With Ampre reporting:
- Using a 0.5 amp charger, I got constant 460mA
- Using the 1.0 amp supplied charger I got 850mA
- Using my Anker 5A IQ charger (i think they license the QC technology) I only got 850mA. I checked and was using a power not data+power cable.
- Using same Anker 5A IQ charger, and a high quality power only Anker cable I got 1850 mA up until 50% charge then 1600 until 65% charge and 1200 until 85% charge. After that it dropped off rapidly 750 at 90%, and 450 at 95%.
Charging when using the phone lightly - occasional call, calendar update, email - consumes around 400 mA. I do not use any of the Honor power saving features. With this in mind:
- 40 min from 0 to 60%
- 1 hour 40 min from 0 to 90%.
Perfectly acceptable to me with the huge battery. GET RID OF YOUR CHEAP POWER CABLES
So IQ or QC chargers do seem to work, and most importantly make sure you have good quality power only cables. I have a drawer full of cables that were fine with older phones and chargers. They are now in the trash.
in china model support quick charge 2
in china model support quick charge 2
Bear100 said:
I finally got my battery down to 0%. With Ampre reporting:
- Using a 0.5 amp charger, I got constant 460mA
- Using the 1.0 amp supplied charger I got 850mA
- Using my Anker 5A IQ charger (i think they license the QC technology) I only got 850mA. I checked and was using a power not data+power cable.
- Using same Anker 5A IQ charger, and a high quality power only Anker cable I got 1850 mA up until 50% charge then 1600 until 65% charge and 1200 until 85% charge. After that it dropped off rapidly 750 at 90%, and 450 at 95%.
Charging when using the phone lightly - occasional call, calendar update, email - consumes around 400 mA. I do not use any of the Honor power saving features. With this in mind:
- 40 min from 0 to 60%
- 1 hour 40 min from 0 to 90%.
Perfectly acceptable to me with the huge battery. GET RID OF YOUR CHEAP POWER CABLES
So IQ or QC chargers do seem to work, and most importantly make sure you have good quality power only cables. I have a drawer full of cables that were fine with older phones and chargers. They are now in the trash.
Click to expand...
Click to collapse
+1 this is the same results I experienced. My phone rarely goes below 50% charge in a normal day
thanks guys, guess i'll get it - 120 on sale for prime day
starscalling said:
thanks guys, guess i'll get it - 120 on sale for prime day
Click to expand...
Click to collapse
worth the extra post - i can confirm the fast charging - was still doing about a percent a minute between 70% and 80% or so. little laggy during setup, occasionally seems to miss a command but dang for the price i can't complain.
using my zenfone2 fastcharger - rox.
Using the app Ampere, my V10 does not take advantage of the fast charge 2.0. I get to charging at or around 700mA, but mostly sub 500mA or less. I've tried using the charger that came with the phone, I purchased an Anker 40W 5-Port charger and recently a Mobiilink 6-Port 60W charger all with the same results. Any ideas as to what may be wrong (if any). My phone has been charging for the last 3hrs and is only at 50% after being plugged in at 9%. Thanks in advance for any help.
dkool1 said:
Using the app Ampere, my V10 does not take advantage of the fast charge 2.0. I get to charging at or around 700mA, but mostly sub 500mA or less. I've tried using the charger that came with the phone, I purchased an Anker 40W 5-Port charger and recently a Mobiilink 6-Port 60W charger all with the same results. Any ideas as to what may be wrong (if any). My phone has been charging for the last 3hrs and is only at 50% after being plugged in at 9%. Thanks in advance for any help.
Click to expand...
Click to collapse
As far as I can determine, neither of the chargers you mention are Qualcomm Quick charge certified. So you won't be able to get the fastest charge with them. Anker does make chargers that are qualcomm certified, but the one you have isn't. Mobilink has zero devices that are certified.
No matter what words are used by the manufacturer, unless they are qualcomm certified you are more than likely out of luck..
What about the charger that came with the phone? It is certified and will most definiitely give you a fast charge.
The V10 is equiped with qualcomm fast charge 2.0 technology. Fast charge 3.0 is available on a few devices and there are lots of manufacturers advertising chargers that are quallcomm fast charge 3.0 certified. I personally would avoid these as they won't speed up the charge rate of the V10 and are usually sold at a premium price.
Thanks for the reply. The phone DOES quick charge. It seems that when I'm using the phone while charging, it charges slowly (>500mA) . When I set it down, it will charge fast (<1.5A). The charger that came with the phone is Qualcomm fast charge 2.0 as well as the 5-port Mobiilink (only one port).
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 5 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
last week i bought a Redmi 5 Plus 4gb/ 64gb Global then i tried to test charge time and quick charge.. 3-4 times with a qualcomm QC 3.0 charger and another QC 2.0 charger.. The results are similar: all about 2 hour.. the charge time with Xiaomi's own 2A Charger it take about 2 and half hour. i know its good but not so good.. By the way i notice that when test with QC3.0 charger it can not charge with 12V.. (i used a usb tester to see voltage and Current) i just saw 9.30v as max voltage. its behave look like QC2.0 not QC3.0
Snapdragon 625 should be support QC3.0 isnt it?
Are there anyone test quick charge?
I have a QC 2.0 charger,takes about 2 hour to fully charge my R5 phone... don't have tester to measure voltage,but phone doesn't heats up,its around 28 C when charging.Charger does
all my qc3.0 tests take 2 hours too. i see my qc 3.0 charger work as qc 2.0 charger. maybe my charger not work as qc 3.0 maybe our phone not support qc 3.0 we will see... i will buy a new qc 3.0 charger and i will test it again then i share the results here too.
using moto g4 plus turbo charger . charging speed 2600+mah . takes approx 1 n half hr.
rajit said:
using moto g4 plus turbo charger . charging speed 2600+mah . takes approx 1 n half hr.
Click to expand...
Click to collapse
thats good score :good::good: but i ordered another qc3.0 adaptor from aliexpress it has 3 port, i will share the score about a mont later
I think it has QC 2.0 instead of 3.0
A QC 3.0 charger is backward compatible.
redsfury said:
I think it has QC 2.0 instead of 3.0
A QC 3.0 charger is backward compatible.
Click to expand...
Click to collapse
i agree with you
welll my new charger delivered me from china, so i tested it a few times. its better than my qc2.0 charger and my other qc3 car charger ( i think its not qc3.0 its just qc2.0 ) My new charger is not as good as expected.. charge time is an hour and 45 minutes. .. its mean 15 min better than qc.2.0 ... i saw 10.1v and 1,35 amp on my usb tester, it could be 12v... Anyway we can see that the phone supports qc 3.0 but not at all its need powerfull and good qualty QC3.0 charger, so if you want to buy a QC3 charger i I recommend that you need to research well.
amedian said:
thats good score :good::good: but i ordered another qc3.0 adaptor from aliexpress it has 3 port, i will share the score about a mont later
Click to expand...
Click to collapse
I'm planning to buy my Xiaomi Redmi 5 Plus from AliExpress. Do you advise me to do so,?
I use my Axon 7 charger which works fine.
Envoyé de mon Redmi Note 5 en utilisant Tapatalk
I've seen mine go up to 2600 mah with a samsung quick charge adaptor, don't know waht version of QC thou, 1.5 hours to 100%.
Cheers!
Ramon S.
I'm using my old charger from vivo , is this normal charging speed?
I tried a charger that is certified by Qualcomm with QC3.0 and got around 2470 mAh (4.171 V)
PLease help! I am facing some battery calibration issues. The phone hardly charges up to 100% no matter how long you charge it. It just gets stuck at 96% or 97% and then the phone goes off at 19% on usage. I have tried different calibration apps to no avail. I even did a clean flash using the miflash tool, still no luck. Somebody help o
mathefaro said:
PLease help! I am facing some battery calibration issues. The phone hardly charges up to 100% no matter how long you charge it. It just gets stuck at 96% or 97% and then the phone goes off at 19% on usage. I have tried different calibration apps to no avail. I even did a clean flash using the miflash tool, still no luck. Somebody help o
Click to expand...
Click to collapse
You are not alone. R5 plus and some another xiaomi device, sometimes we see this problem. And there is no software solution. Wipe, mi flash, battery calibrationi root... I tried everything but no luck.
Only solution is;
Remove the back cover (i did it, its not so difficult.)
Remove the battery connector plug
Wait a few seconds
Plug it back.
Thats done. Problem solved.
https://www.youtube.com/watch?v=JkeP30myjF8
amedian said:
welll my new charger delivered me from china, so i tested it a few times. its better than my qc2.0 charger and my other qc3 car charger ( i think its not qc3.0 its just qc2.0 ) My new charger is not as good as expected.. charge time is an hour and 45 minutes. .. its mean 15 min better than qc.2.0 ... i saw 10.1v and 1,35 amp on my usb tester, it could be 12v... Anyway we can see that the phone supports qc 3.0 but not at all its need powerfull and good qualty QC3.0 charger, so if you want to buy a QC3 charger i I recommend that you need to research well.
Click to expand...
Click to collapse
Can you please confirm whether it supports quick charge 3.0 ?
I`m about to buy a mi quick charge 3 adapter.
You can post screenshot of your file located at /sys/class/power_supply/battery/uevent
Just want to be sure. That`s it.
I know I might be late but I'm getting around 4.4v is that normal?
kemdroid said:
I know I might be late but I'm getting around 4.4v is that normal?
Click to expand...
Click to collapse
if you use normal charger. im also getting 4.4V. You can try quick charge 2 or higher (it`s compatible)
paulb86 said:
if you use normal charger. im also getting 4.4V. You can try quick charge 2 or higher (it`s compatible)
Click to expand...
Click to collapse
Actually I heard it's fine. I'm using quick charge 3.0. Redmi Note 5 AI/Global. Fully charges from 0 in 1hr 50 mins.