Unfortunatelly I haven't found any support for this watch (system img, or saved full Twrp backup, factory img...) to repair the softbrick. I have found the ota.zip file, but I can't use it because of the system7 error. I have a Twrp on my watch, but I can't find any way to restart my wach. I'm so sad because I can't use my watch.
me too. I stuck with the smaller model because I thought that it looked much better with my Nemesis leather cuff band than the larger model. But no one seems to have the original system image or a recovery I could use for it since I bricked mine. I've gone back to my Misfit Shine, which is not even close to being a smartwatch
Take a look to my thread, I uploaded a twrp backup, but for WI501Q (system+boot)
TWRP BACKUP
https://www.dropbox.com/s/6d51x7mkub6e5ag/TWRP-2016-03-08.zip?dl=0
matze19999 said:
Take a look to my thread, I uploaded a twrp backup (system+boot)
---------- Post added at 21:25 ---------- Previous post was at 21:16 ----------
TWRP BACKUP
https://www.dropbox.com/s/2dcjdeen58kz0qy/asus2.zip?dl=0
Click to expand...
Click to collapse
I downloaded the file and unzipped it. I booted to twrp recovery and used ADB PUSH to send the files to /sdcard/ on the watch. I then used Install in twrp to install the recovery and boot img files (there is no option in twrp to install system.img). After all of this I still cannot boot the watch, it goes to CSC Fastboot.
Am I doing something wrong?
Yeah, its a twrp backup file. Create a random backup ( for example only Boot.IMG ) in twrp. It will create a folder in /sdcard/twrp/ which is named XXXX-XXXX. Its different from device to device. In this folder you can move my twrp backup folder. Then reboot again to twrp. Now you will find a backup item in restore tab. Thats my backup
matze19999 said:
Yeah, its a twrp backup file. Create a random backup ( for example only Boot.IMG ) in twrp. It will create a folder in /sdcard/twrp/ which is named XXXX-XXXX. Its different from device to device. In this folder you can move my twrp backup folder. Then reboot again to twrp. Now you will find a backup item in restore tab. Thats my backup
Click to expand...
Click to collapse
Thank you for all the steps.
I tried the steps and I noticed that when I selected the restore option only BOOT was able to restore. So I looked at the backup that twrp made and the filenames were actually boot.emmc.win, recovery.emmc.win, and system.emmc.win. So I took your three files and renamed the img extensions to emmc.win extensions and moved them directly to the backup folder that twrp created. This allowed me to be able to select all three options for restore (boot, recovery and system). The restore completed without errors. However when I reboot the watch it continues to quickly show "Recovery Mode!" and go to "CSC Fastboot Mode!"
Am I still doing this wrong?
download the backup file again and test it
matze19999 said:
download the backup file again and test it
Click to expand...
Click to collapse
I downloaded it again using the same method I described earlier, but I get the same result.
I have the wren device WI502Q.
Backup file is only for sparrow
I guess this thread really does prove there is no support for wren, as the title states. Too bad..
Welp i'll just buy a new watch. My CAVS just won!!!! Wooooo!!!!!!
cland216 said:
I guess this thread really does prove there is no support for wren, as the title states. Too bad..
Click to expand...
Click to collapse
https://r3---sn-h0j7snel.gvt1.com/p...9A6B905E737F34D1021CDEC6AED82CB6617A&key=cms1
stock rom for small version
matze19999 said:
https://r3---sn-h0j7snel.gvt1.com/p...9A6B905E737F34D1021CDEC6AED82CB6617A&key=cms1
stock rom for small version
Click to expand...
Click to collapse
I get an Error 7:
"this device has omni_wren wren:6.0.1/MHC19J"
I updated the watch to MM before I bricked it. Where can I find MHC19J image?
I have a stock Wren on mm, you still need a backup?
couchlock said:
I have a stock Wren on mm, you still need a backup?
Click to expand...
Click to collapse
I am thinking of rooting and would really appreciate a backup just in case. I really would appreciate it and I know others would appreciate it as well.
I'll be off in a couple days. I'll post a link from my mega account when I get it.
https://forum.xda-developers.com/zenwatch-2/general/wi502q-how-unbricked-watch-twrp-backup-t3521916
Unbrick guide I made.
So what do you need a back up of and how do I make the backup. Sorry so long but I finally have time. And a PC again
Related
Problem solved!
**********************
I think my problem happened because a flashed a ROM with MG4 baseband, and then flashed UltimaROM with another baseband which caused my baneband to corrupt.
I tried to flash Stock ROM and install different baseband but non of this worked.
finally I flashed BTU stock ROM (Which comes with MG4) but the problem still here.
Then I installed root, deleted the efs folder and replaced all the files with the files in the backup - restart and everything is working! my IMEI returned to normal.
**********************
Original question
Hello devs,
I have Siyah kernel which auto backup my EFS, i have backup named "efs_28Aug2013-1852.tar.gz"
I want to restore from this backup because I lost my IMEI when I flashed UltimaROM
I renamed it to "efsbackup.tar.gz" and put it in the root of the sdcard
then I started adb shell & run the code
Code:
su
umount /efs
mke2fs /dev/block/mmcblk0p1
mount -w -t ext4 /dev/block/mmcblk0p1 /efs
busybox tar zxvf /sdcard/ efsbackup.tar.gz -C /
I granted ADB shell root access
then i went to recovery and run the command (because I can't run umount /efs while device's running it gives resource busy message)
However when I run the first command "su" in gives me this message
Code:
/sbin/sh: su: not found
so I skipped to the next command
but I get the message
Code:
umount: can't umount /efs: Invalid argument
Please guys any help appreciated
Click to expand...
Click to collapse
Unzip it with a file manager and use a root explorer to replace manually
Sent from my GT-I9300 using Tapatalk 4
.
I've backup my efs with adb but how do you have a file on tar format, i've got a file on .img, it's normal ?
There's about nine different ways to backup the efs, .img is fine but a little on the large side at 20mb. A .tar of the same is only 5mb.
rootSU said:
Unzip it with a file manager and use a root explorer to replace manually
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Thank you for your reply, I did as you said but this only changed my IMEI from "Unknown" to the generic IMEI "004999..."
Is there something wrong in the method or my backup may be corrupt
Sent from my Nexus 7 using Tapatalk 2
Read the imei / efs thread in general.
Sent from my GT-I9300 using Tapatalk 4
Thank you again, I read the thread in the past but it looks like it has been updated recently.
I think my problem happened because a flashed a ROM with MG4 baseband, and then flashed UltimaROM with another baseband which caused my baneband to corrupt.
I tried to flash Stock ROM and install different baseband but non of this worked.
finally I flashed BTU stock ROM (Which comes with MG4) but the problem still here.
Then I installed root, deleted the efs folder and replaced all the files with the files in the backup - restart and everything is working! my IMEI returned to normal.
Thank you RootSU for your help.
hey bro,
i am stuck
help me out
- my efs(folder) is blank
- i installed stock with pit file but no help!
- right now my cell is in bootloop!
- it goes to recovery, download mode.
i have efs.tar.gz file and a folder named efs in my ext sd
how do i copy that to int memory?
can't even create a cwm flashable zip file of the same?????
help me bro.....
You are posting in a thread that tells you how to restore an efs backup, how much more could you possibly need?
Go to recovery, factory reset.
Get the phone to boot, unpack the .tar file and follow the instructions in the OP.
boomboomer said:
You are posting in a thread that tells you how to restore an efs backup, how much more could you possibly need?
Go to recovery, factory reset.
Get the phone to boot, unpack the .tar file and follow the instructions in the OP.
Click to expand...
Click to collapse
Dear boomboomer,
i am sorry, but my phone is in "bootloop" how am i suppose to delete the "EFS" ? that s what i am asking!!!!!
i have both efs.tar.gz and extracted folder ready in my ext-sd......
i wonder if somebody can help me with creating a cwm.zip from the .tar file
thanks ....
try to install stock again via odin but this time install a diffrent version (for example if you installed INU this time try INS).. before that factory reset your phone and wipe cache via recovery mode.. don't lose your efs backup it's very important copy it to your PC in case something wrong happens
i already did so
almousawi said:
try to install stock again via odin but this time install a diffrent version (for example if you installed INU this time try INS).. before that factory reset your phone and wipe cache via recovery mode.. don't lose your efs backup it's very important copy it to your PC in case something wrong happens
Click to expand...
Click to collapse
bro, thanks for your help recently i tried cm 10 also but nothing happened.
believe me i tried everything now the only option is left that is
to restore efs backup from efs.tar.gz (which is about 12 MB)
OR
create a cwm flashable zip from the efs folder which is about 22 MB)
OR
take my phone to download mode and try to push whole "efs" folder to the location with help of "ADB"
hello
mikks said:
bro, thanks for your help recently i tried cm 10 also but nothing happened.
believe me i tried everything now the only option is left that is
to restore efs backup from efs.tar.gz (which is about 12 MB)
OR
create a cwm flashable zip from the efs folder which is about 22 MB)
OR
take my phone to download mode and try to push whole "efs" folder to the location with help of "ADB"
Click to expand...
Click to collapse
hello nobody is here to help......??????
mikks said:
hello nobody is here to help......??????
Click to expand...
Click to collapse
Correct this is not a paid for service .
Suggest you take it to a service centre .
know that i did that already....
JJEgan said:
Correct this is not a paid for service .
Suggest you take it to a service centre .
Click to expand...
Click to collapse
thanks for the reply, respect to your reply and interest no disrespect ...
i took that to the center but they failed and by the way they come to me in some cases... so they give me free service...
my phone is in boot loop, i have efs.tar.... can i use phills recovery ????? or can i use someone elses backup... just to boot up my device ...then i'll be good .... i just need to get my device booted up.....
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?
Basically, I deleted system on my Desire 610 and I have no idea what to do now, so I came to ask you guys for help. Cheers.
I have actually found the stock system.img, recovery.img and boot.img by jmz, but every time I try to flash the system.img in via fastboot I get the following error: load_file: could not allocate -1879048192 bytes
error: cannot load 'system.img'
Can anyone please help me ASAP? I really need to get my phone up running soon. Thanks!
terminator54 said:
I have actually found the stock system.img, recovery.img and boot.img by jmz, but every time I try to flash the system.img in via fastboot I get the following error: load_file: could not allocate -1879048192 bytes
error: cannot load 'system.img'
Can anyone please help me ASAP? I really need to get my phone up running soon. Thanks!
Click to expand...
Click to collapse
Where did yoy buy the phone. We need to no which variant you have to be of any help.
MiniBlu
I bought it in Croatia, so I guess it'd be East Europe or just Europe. I've downloaded many RUU's so far and neither got past sending or updating signature...
EDIT: I tried to flash the system.img with different fastboot files and now I get the following error: invalid sparse file format at header magi.
terminator54 said:
I bought it in Croatia, so I guess it'd be East Europe or just Europe. I've downloaded many RUU's so far and neither got past sending or updating signature...
EDIT: I tried to flash the system.img with different fastboot files and now I get the following error: invalid sparse file format at header magi.
Click to expand...
Click to collapse
There is no ruu for european devices available but the buckup linked in this post http://forum.xda-developers.com/showpost.php?p=63189341&postcount=112 should work.
MiniBlu
MiniBlu said:
There is no ruu for european devices available but the buckup linked in this post http://forum.xda-developers.com/showpost.php?p=63189341&postcount=112 should work.
MiniBlu
Click to expand...
Click to collapse
Thanks alot. I'll try it out and then get back to you with the results.
E: Could you be more specific? Where do I need to extract it?
No need to extract it flash with twrp, if u don't have it you can flash it via adb, I made a thread to flash updates on rooted device u can use it as a guide to flash twrp only
porozex said:
No need to extract it flash with twrp, if u don't have it you can flash it via adb, I made a thread to flash updates on rooted device u can use it as a guide to flash twrp only
Click to expand...
Click to collapse
Actually the link I posted is to a rar compressed twrp backup. It needs to be extracted to an sdcard in /twrp/backup folder then use the restore function in twrp to restore it. Last time I checked all the links I could find to flashable zips for eu devices have gone dead. Also It would be a good idea to do a factory reset in twrp(in Wipe menu) before restoring the backup.
MiniBlu
MiniBlu said:
Actually the link I posted is to a rar compressed twrp backup. It needs to be extracted to an sdcard in /twrp/backup folder then use the restore function in twrp to restore it. Last time I checked all the links I could find to flashable zips for eu devices have gone dead. Also It would be a good idea to do a factory reset in twrp(in Wipe menu) before restoring the backup.
MiniBlu
Click to expand...
Click to collapse
So, pretty much I need to create a new folder on an sdcard and name it twrp and then make another folder in the twrp one and name it backup and then just extract the folder from the .zip file in there?
terminator54 said:
So, pretty much I need to create a new folder on an sdcard and name it twrp and then make another folder in the twrp one and name it backup and then just extract the folder from the .zip file in there?
Click to expand...
Click to collapse
Yes except the folder names are actualy TWRP and BACKUPS . Then in twrp hit restore button. and select external sd as backup location. Then select the backup and swipe to restore. This is a UK backup but it should work ok except if you need languages that aren't there you can install "more locales 2" from play store. I hope this works for you.
MiniBlu
MiniBlu said:
Yes except the folder names are actualy TWRP and BACKUPS . Then in twrp hit restore button. and select external sd as backup location. Then select the backup and swipe to restore. This is a UK backup but it should work ok except if you need languages that aren't there you can install "more locales 2" from play store. I hope this works for you.
MiniBlu
Click to expand...
Click to collapse
I did everything alike, but when I enter restore it appears empty.
EDIT: I found a solution for that aswell. Apparently, I have to copy the backup folder to data/media/0 to be able to see it in restore, but I don't have data/media/0, I only have data/media. Anything I can do about that?
EDIT 2: I managed to fix everything. I owe you alot, man. Thanks a bunch, bunch, bunch!
So I'm used to doing backup of devices in TWRP but it seems that nandroid is the way you do it with these. I downloaded and ran a backup to SD Card. I chose the option for TWRP backup, will that allow me to do a restore of the image I created here from recovery or would i need to install TWRP recovery to recover? If I chose the backup type Clockworkmod would that be restoreable from stock recovery? The directory it created is only 1.6GB w/o compression which doesn't seem right to me.
I did read the idiots guide to root first BTW.
Thanks guys.
Tried to do a recovery restore using optin recover system from backup but I have no idea the path it is looking for, it doesn't say just says no system.img so ignore. So it appears nandroid creates a system.ext4.tar so I suppose I could decompress this and see if there is a system.img file that the recovery is looking for and put it in the root of the sdcard if recovery is actually looking /external_sd.
Anyone have any input?
Dave
Hello there,
can someone please provide a system.img, recovery.img and boot.img from a WI501Q? I've derped something up quite hard by backing up the system partition while the bootloader was still locked, now I tried to flash it and the filesystem seems to be corrupted...
I tried reflashing a TWRP backup made from someone else but even transfering the backup to the watch fails at some point with "protocol error"... The watch reboots then and no files were saved to the watch.
Thanks already!
See Post #4 on how I resolved this (kinda).
[del]
ranf said:
[del]
Click to expand...
Click to collapse
What did you mean by using ext2simg?
Okay, after some derping around, trying, failing and more I managed to restore it...
I had a TWRP backup from my still OEM locked bootloader (I booted TWRP via fastboot boot twrp3.img), via fastboot I formated the system, userdata, cache and so on partitions and something along those lines seemed to work.
Before that the /data partition seemed to be corrupt for whatever reason, not even TWRP was able to display the free space. After doing the above it suddenly was able to display it again but the /data/media folder was missing, I created it manually, pushed the TWRP folder onto it, Restored and it worked!
So yeah, not sure what exactly went wrong here or how to fix it... Sorry...
EpicLPer said:
What did you mean by using ext2simg?
Click to expand...
Click to collapse
In Ubuntu it is in this package:
http://packages.ubuntu.com/xenial/amd64/android-tools-fsutils/filelist
Works better than img2simg.