Is their somebody who can give me some guidance what steps to take to customize your phone with a custom rom and custom recovery. I've been reading the web bow but somehow it seems no unlocking and no custom recovery is required and where flashing goes by a external flash program (fs flash where you use a txt file and from their the program downloads itself the rom.... Now I am confused...
I am only used to HTC, where I need to unlck boatloader, s-off, flash custom recovery and then flash (through) TWRP a custom Tom. How does it work with a Elephone P9000?
Here is the tutorial of P9000 and P9000lite root.
Preparation:
1. Make sure that your computer installed a driver
(Downloaad link:https://mega.co.nz/#!55BQkKiR!OPBrnj7SXxsUbuchAjV8orT9SMAOMpbDesYTMO2DDHY)
2. Flash tool (SP flash tool recommended, download link:https://mega.nz/#!ixdnhDLK!oOaAsJrcvJI0vH3fTsUOYjtDxQ_HT61E-_iuo6fTuKk)
1. Download the file from below link. you're going to save to somewhere you can remember it, for this tutorial, I'm going to use my desktop.
Dnowload link: https://mega.nz/#!mh8UxBpY!yjrvKqtxP6VUQKfe-cunpKhCWZUE_vo0jP88wpLiFBA
2. Unzip the file that you have downloaded just now.
3. Copy zipe file named "superSU_1.zip、superSU_2.zip" to your SD card and then turn off the phone.
4. Open flash tool, Click "scatter-loading" and choose the file named "p9000-recovery" which you have just saved in your computer.
5.Click download and then connect your phone with computer.
6. Turn off your phone, press "power" + "VOL +" to enter recovery mode. ("VOL +" to choose, "power" to confirm)
8.Click 'install', find 'supersu_1.zip', 'supersu_2.zip'
9.First click 'supersu_1.zip', then swipe to confirm 'flash'
10. Click the 'home' button to return to the home page, click 'install', find 'supersu_2.zip', click 'supersu_2.zip', then swipe to confirm flash
11.Congratulations!!! You have finished the whole process, now enjoy.
Then do the same with the ROM that you like (Step 6-10)
Please hit Thanks if I helped you!
LordWurstbrot said:
Here is the tutorial of P9000 and P9000lite root.
Preparation:
1. Make sure that your computer installed a driver
(Downloaad link:https://mega.co.nz/#!55BQkKiR!OPBrnj7SXxsUbuchAjV8orT9SMAOMpbDesYTMO2DDHY)
2. Flash tool (SP flash tool recommended, download link:https://mega.nz/#!ixdnhDLK!oOaAsJrcvJI0vH3fTsUOYjtDxQ_HT61E-_iuo6fTuKk)
1. Download the file from below link. you're going to save to somewhere you can remember it, for this tutorial, I'm going to use my desktop.
Dnowload link: https://mega.nz/#!mh8UxBpY!yjrvKqtxP6VUQKfe-cunpKhCWZUE_vo0jP88wpLiFBA
2. Unzip the file that you have downloaded just now.
3. Copy zipe file named "superSU_1.zip、superSU_2.zip" to your SD card and then turn off the phone.
4. Open flash tool, Click "scatter-loading" and choose the file named "p9000-recovery" which you have just saved in your computer.
5.Click download and then connect your phone with computer.
6. Turn off your phone, press "power" + "VOL +" to enter recovery mode. ("VOL +" to choose, "power" to confirm)
8.Click 'install', find 'supersu_1.zip', 'supersu_2.zip'
9.First click 'supersu_1.zip', then swipe to confirm 'flash'
10. Click the 'home' button to return to the home page, click 'install', find 'supersu_2.zip', click 'supersu_2.zip', then swipe to confirm flash
11.Congratulations!!! You have finished the whole process, now enjoy.
Then do the same with the ROM that you like (Step 6-10)
Please hit Thanks if I helped you!
Click to expand...
Click to collapse
Much appreciated, great thx. So I was on the right track. Good to have confirmation...[emoji3]
I succeeded, took me some time to figure out SP Flash Tool (to be more precise how to select the recovery.img) but i succeeded.
very big thanks.
Sent from my P9000 using XDA-Developers mobile app
No problem[emoji106]
Please hit Thanks if I helped you!
how many time it takes since we click download button on flash tool?
tolias77 said:
how many time it takes since we click download button on flash tool?
Click to expand...
Click to collapse
Just a few seconds! Make sure you're phone is off and then connect the phone via USB!
Please hit Thanks if I helped you!
In that case, I do something wrong. I have elephone P9000 lite
On witch version are you?
tolias77 said:
In that case, I do something wrong. I have elephone P9000 lite
Click to expand...
Click to collapse
Please hit Thanks if I helped you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You are on Stock and rooted right?
Please hit Thanks if I helped you!
It's not rooted
Related
the original was done for the Galaxy Tab by Flokey and can be found here. i've tweaked it a tad and made the .zip much smaller.
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it's not an exact replica of what you'll see on your phone, but it's pretty close. check out the youtube vid in the above link to see it "live".
Download:
DukeOS-bootanimationLOW-cwm.zip (1.9M)
INSTALLATION (for those who need it):
copy the file to your phone (i use sshdroid to copy it to my /mnt/sdcard/)
run System Recovery and choose Recovery Mode (make sure power is plugged in)
wait... (could it boot up past the Motorola logo any slower?)
select Install zip from SDCARD
select choose zip from internal sdcard (or just sdcard, your mileage may vary)
scroll down until you find the DukeOS-bootanimationLOW-cwm.zip file
hit your power button to select it
scroll down to Yes - Install DukeOS-bootanimationLOW-cwm.zip and hit your power button to select it.
watch the quick install screen
scroll down to Go Back and hit the power button again.
Reboot system now should be highlighted, hit the power button to reboot.
ENJOY!
===================================================================
as always, YOU are responsible for your phone, no matter how much i suck @ this.
===================================================================
Changes:
Thx !! Very cool !!
very nice！
please send other links. your link is not working. thx in adnvance.
itsonlym3 said:
the original was done for the Galaxy Tab by Flokey and can be found here. i've tweaked it a tad and made the .zip much smaller.
Preview:
it's not an exact replica of what you'll see on your phone, but it's pretty close. check out the youtube vid in the above link to see it "live".
Download:
DukeOS-bootanimationLOW-cwm.zip (1.9M)
INSTALLATION (for those who need it):
copy the file to your phone (i use sshdroid to copy it to my /mnt/sdcard/)
run System Recovery and choose Recovery Mode (make sure power is plugged in)
wait... (could it boot up past the Motorola logo any slower?)
select Install zip from SDCARD
select choose zip from internal sdcard (or just sdcard, your mileage may vary)
scroll down until you find the DukeOS-bootanimationLOW-cwm.zip file
hit your power button to select it
scroll down to Yes - Install DukeOS-bootanimationLOW-cwm.zip and hit your power button to select it.
watch the quick install screen
scroll down to Go Back and hit the power button again.
Reboot system now should be highlighted, hit the power button to reboot.
ENJOY!
===================================================================
as always, YOU are responsible for your phone, no matter how much i suck @ this.
===================================================================
Changes:
Click to expand...
Click to collapse
please send other links. your link is not working. thx
vladzmir said:
please send other links. your link is not working. thx
Click to expand...
Click to collapse
i'll see if i still have it this evening when i get home.
thanks for the interest.
can it be used for all roms?
sanaldi said:
can it be used for all roms?
Click to expand...
Click to collapse
Froyo and GB were released and available for Atrix 4G users in 2011. Users were using this boot animation back then. Its 2013, and we have Froyo, GB, ICS, and JB. Switching boot animations is done on ALL versions and ANY ROM.
cool..... i reboot my phone a bit more lately
link is busted
Hello everyone! As Some Users have this problem,and many others of you can have it too,I'm writing this guide to get back to LG's ICS when you're coming from CM10. This also works for Unbricking your device.
Warning,Dragons Ahead! BEFORE YOU START DOING THIS,I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE,THIS HAS BEEN TESTED AND WORKING!
Requirements::
A Windows Based PC(This has been tested under Windows 7 SP1 64-Bit,I'm not sure it will work under Windows 8)
L7 With CM10 on it
Homero's V10K with CWM,ROOT and Unlocked Bootloader which you can find here: http://forum.xda-developers.com/showthread.php?t=2176430 credits to Homero for making the KDZ.
KDZ_FLASHER which you can find at the end of the post.
LG USB Drivers Installed
ADB which you can find at the end of the post.
So,Let's Start!
1. Once You've Downloaded Homero's V10K,Extract the ZIP and you will find a .KDZ file.
2. Now Download KDZ_FW_UPDATE.zip and extract it,then open the folder where you extracted it and Start KDZ_FW_UPDATE_EN with Administrator Rights (Right Click on file and select Run As Administrator...)
3. Once the program started,in Type select 3GQCT and in Phone Mode select EMERGENCY, then in KDZ File select the precedently downloaded Homero's V10K kdz file and press open.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Make Sure your Phone is connected to the computer in EMERGENCY MODE( Remove the battery from the phone,then while pressing Vol+ Connect the usb to the computer,a yellow screen must come up showing EMERGENCY)
5. Once you've done this,press Launch Software Update and let it work,the procedure takes about 5-10 Minutes,so don't worry.
6. At the end of the procedure the phone will reboot and an LG Animated Logo will come up,and after some minutes KDZ_FW_UPDATE Will say you that there has been an error,Don't panic
7. With still the phone connected to the PC,Download ADB zip at the end of the post and extract it in your C:/ Drive,then open up CMD and write:
Code:
cd ADB
adb devices(just to make sure that the computer recognizes your phone)
adb reboot recovery
8. Now your phone will reboot in CWM Recovery, just do Wipe Data/Cache,Wipe Cache,Wipe Dalvik(Which is situated in Advanced Menu). When you have done this,select Reboot System and wait for your phone to finish the boot,and ENJOY!Good as new! :victory:
That's all,I Hope I could help you!
Thanks To:
-Homero2 for making the V10K KDZ Flashable with ROOT,CWM and Unlocked Bootloader
This is actually the same thing as unbricking your phone you know...
Sent from my LG-E610 using xda premium
dev-DaT said:
Thuis is actually the same thing as unbricking your phone you know...
Sent from my LG-E610 using xda premium
Click to expand...
Click to collapse
Yep,I've done a mistake when I wrote the guide :cyclops: I'll correct it
Wolf80 said:
Yep,I've done a mistake when I wrote the guide :cyclops: I'll correct it
Click to expand...
Click to collapse
hi wolf, follow everything on your tutorial but my phone stock on boot animation. Any recommendation?
Edit: Phone back to live again, but using the button combination. I was not able to boot using the adb command.
Thanks to you and homero for the guide.
vaikz said:
hi wolf, follow everything on your tutorial but my phone stock on boot animation. Any recommendation?
Edit: Phone back to live again, but using the button combination. I was not able to boot using the adb command.
Thanks to you and homero for the guide.
Click to expand...
Click to collapse
When the phone reboots,you have to wait 2-3 mins till it connects,then write adb devices in cmd and it should figure in devices list Anyway I'm glad I could help ya
Thanks for the tutorial. Saved my ass.
com975 said:
Thanks for the tutorial. Saved my ass.
Click to expand...
Click to collapse
You're welcome man
does this method also work for e610?
xstatik said:
does this method also work for e610?
Click to expand...
Click to collapse
I don't know man,I tested it only on P700,there should be a guide somewhere for E610
does this tut goes with p880
Hello Guys
I've download CWM img file for my S3 from this clockworkmod website.
but noticed that I only have to flash this file to my S3 (can't use by recovery mode).:crying:
please can you guys show me how to convert this img to zip file so I can use it like what i have in my S2 (like this recovery-clockwork-4.0.1.5-galaxys2_2.zip)
Appreciate your reply.
wisammeesh said:
Hello Guys
I've download CWM img file for my S3 from this clockworkmod website.
but noticed that I only have to flash this file to my S3 (can't use by recovery mode).:crying:
please can you guys show me how to convert this img to zip file so I can use it like what i have in my S2 (like this recovery-clockwork-4.0.1.5-galaxys2_2.zip)
Appreciate your reply.
Click to expand...
Click to collapse
if you are using gt-19300 (international variant) try this or go here where you get official cwm for s3 international
MoonBlade said:
if you are using gt-19300 (international variant) try this or go here where you get official cwm for s3 international
Click to expand...
Click to collapse
Many thanks for reply
I tried all of these CWM in the thread you sent, but stocked in the (signature verification failed) error, please help.
wisammeesh said:
Many thanks for reply
I tried all of these CWM in the thread you sent, but stocked in the (signature verification failed) error, please help.
Click to expand...
Click to collapse
in recovery goto install zip menu and then toggle the signature verification to disabled. then flash.
MoonBlade said:
in recovery goto install zip menu and then toggle the signature verification to disabled. then flash.
Click to expand...
Click to collapse
But I'm using the stock recovery mode & and there is no toggle option??
when I load any zip file (root or the CWM) from the stock recovery the installation aborted due to signature verification failed.
wisammeesh said:
But I'm using the stock recovery mode & and there is no toggle option??
when I load any zip file (root or the CWM) from the stock recovery the installation aborted due to signature verification failed.
Click to expand...
Click to collapse
ok how about using the cwm.tar and flashing via odin ?
MoonBlade said:
ok how about using the cwm.tar and flashing via odin ?
Click to expand...
Click to collapse
Ok can you please show how to do it, coz I also try this method step by step but it wont success.
every time I boot in recovery mode the old stock rc loaded instead of CWM, please help.
I used Odin 3.04 & touch CWM last version tar file.
wisammeesh said:
Ok can you please show how to do it, coz I also try this method step by step but it wont success.
every time I boot in recovery mode the old stock rc loaded instead of CWM, please help.
I used Odin 3.04 & touch CWM last version tar file.
Click to expand...
Click to collapse
For flashing via Odin DO NOT BOOT INTO RECOVERY MODE. Boot into DOWNLOAD MODE. here is a description below.
The Samsung drivers must be properly installed and phone recognized prior to flashing with odin.
1. Open the "Odin307" folder and right click on "Odin3 v3.07.exe" and choose run as
administrator. Odin will open.
2. place your phone into download mode. Turn off phone - press and hold volume down, home
button and power button at the same time. When you see the warning push the volume up
button to continue.
3. Plug your usb cord to your phone and computer and wait until you see any number and com
in the com
4. Check the PDA block and browse to the tar file you would like to flash.
5. that settings are correct for what you are doing
When all this is setup Odin should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. If everything looks like the picture, click on the start button in Odin.
Please do not mess iwth the other options in Odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would keep it short. Don't ask questions. This device dump is straight away coming from the device. So if you want to get started with something, here is the boot, system and recovery images. If you need anything else, let me know below in the comments. Please do not ask for review videos, benchmark tests, camera quality, blah, blah. You have the YU forum to ask such questions. Thank you and enjoy.
Download: here
reserved
good to see a dev like u here,its enough for expecting support for Yureka:good:
That was so quick mate thanks for sharing it
will look forward for more development
Can someone please upload the build.prop only?
CosmoDroid said:
Can someone please upload the build.prop only?
Click to expand...
Click to collapse
here
https://github.com/YUPlayGod/android_device_yu_tomato/blob/cm-11.0/system.prop
good work
Can anyone pls tell me how to flash this file??? And my phone is rooted and in cwm recovery.... But i want stock recovery to flash the update?? So plsss
Need to flash
Ashok sha said:
Can anyone pls tell me how to flash this file??? And my phone is rooted and in cwm recovery.... But i want stock recovery to flash the update?? So plsss
Click to expand...
Click to collapse
the recovery stock is inside the zip http://forum.xda-developers.com/yureka/development/tool-one-tool-t3006128
androidgalaxyman said:
the recovery stock is inside the zip http://forum.xda-developers.com/yureka/development/tool-one-tool-t3006128
Click to expand...
Click to collapse
Bro i downloaded the zip...now pls tell me how to flash this??
Steps
Ashok sha said:
Bro i downloaded the zip...now pls tell me how to flash this??
Click to expand...
Click to collapse
1. Enable android debugging mode in the mobile device.
2. using the usb cabel to connect and download & install PDA Net drivers.
3. Extract the package and go inside folder called "TREASU* like that.
4. click open the command line windows.
5. Type adb devise , it will show the list of devices connected. This is actually cross checking your devices properly connected with debugger.
6. Moreover go to the mobile setting, -> security -> tick unknown sources.
7. in the same command line go back upward one directory, you can find all*****.bat file, run it.
8. it will give the steps.
9. First do unlock the boot loader.
10. restart the mobile , then again install the customer recovery.
11. Then again using this tool to root.:laugh:
Tool is straightforward to use.
androidgalaxyman said:
1. Enable android debugging mode in the mobile device.
2. using the usb cabel to connect and download & install PDA Net drivers.
3. Extract the package and go inside folder called "TREASU* like that.
4. click open the command line windows.
5. Type adb devise , it will show the list of devices connected. This is actually cross checking your devices properly connected with debugger.
6. Moreover go to the mobile setting, -> security -> tick unknown sources.
7. in the same command line go back upward one directory, you can find all*****.bat file, run it.
8. it will give the steps.
9. First do unlock the boot loader.
10. restart the mobile , then again install the customer recovery.
11. Then again using this tool to root.:laugh:
Tool is straightforward to use.
Click to expand...
Click to collapse
Bro shall i use flashify app to install this recovery.img
Why u want to do that
Ashok sha said:
Bro shall i use flashify app to install this recovery.img
Click to expand...
Click to collapse
Hi Mate, whats the show stopper to this procedure to do with that tool. its good to use that.
I wanted to go back to the Stock CM11S but couldn't download the flashable zip from the Cyngn support page. Can anyone instruct how to use this dump to revert back to CM11S?
Download from Yu Forum and also follow easy steps mentioned there. Here is link
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
Bricked Qualcomm 9008 mode
vishal_android freak said:
I would keep it short. Don't ask questions. This device dump is straight away coming from the device. So if you want to get started with something, here is the boot, system and recovery images. If you need anything else, let me know below in the comments. Please do not ask for review videos, benchmark tests, camera quality, blah, blah. You have the YU forum to ask such questions. Thank you and enjoy.
Download: here
Click to expand...
Click to collapse
Hi there, could you please provide me the complete eMMC dump of our Yu, off course except all partitions that could be found inside CM11 stock fastboot update zip (except these partitions: NON-HLOS/modem, boot, recovery, system, userdata, aboot, hyp, rpm, sbl1, tz).
I really need those files to recover my Yu. I'm leaving in Indonesia, so I can't get it replaced.
Some files for Leagoo M8 owners:
SuperSU v2.79
http://ul.to/nzjkfpds
Recovery (TWRP & Scatter File)
http://ul.to/sf9ig4yl
MTK Drivers
http://ul.to/crs6xzlz
SP Flash Tool v5.1540.00
http://ul.to/4wv9y3wj
Screen Overlay Fix (to flash)
http://ul.to/vx2lszbz
Xposed (to flash)
http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v87-sdk23-arm.zip
Xposed (App)
https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
Use SP Flash Tool to flash the Recovery (TWRP) and use then TWRP on your phone to flash SuperSu, Xposed and Screen Overlay Fix
Unable to download files
Can you please upload those files here or Dropbox as I am unable to download from that site. Thank you.
donshady28 said:
Can you please upload those files here or Dropbox as I am unable to download from that site. Thank you.
Click to expand...
Click to collapse
Sorry, too large for XDA. Use Uploaded free user Download. Should work for everyone
Scatter file Missing
After downloading the Recovery Twrp I can't find scatter file. Kindly upload the scatter file. Thank you.
donshady28 said:
After downloading the Recovery Twrp I can't find scatter file. Kindly upload the scatter file. Thank you.
Click to expand...
Click to collapse
Scatter file is inside the TWRP.rar file.
MT6580_Android_scatter.txt
Can anyone confirm that TWRP is fully working? sd card, backups, etc all working?
stephendt0 said:
Can anyone confirm that TWRP is fully working? sd card, backups, etc all working?
Click to expand...
Click to collapse
Yes, it works.
I used it to flash SuperSu and Xposed. :good:
Thanks for confirming it works!!!
SomeOneX said:
Yes, it works.
I used it to flash SuperSu and Xposed. :good:
Click to expand...
Click to collapse
Excellent. Are you able to restore backups? This is something important for me
I'm unable to download the scatter file.
SomeOneX said:
Scatter file is inside the TWRP.rar file.
MT6580_Android_scatter.txt
Click to expand...
Click to collapse
I'm unable to download the scatter file. Can anyone send the scatter file to my mail.
[email protected] Thank you.
donshady28 said:
I'm unable to download the scatter file. Can anyone send the scatter file to my mail.
[email protected] Thank you.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
stephendt0 said:
Excellent. Are you able to restore backups? This is something important for me
Click to expand...
Click to collapse
I used only TitaniumBackup.
SomeOneX said:
I used only TitaniumBackup.
Click to expand...
Click to collapse
OK, I'd like to try Xposed and a few other mods but I'd hate to not be able to restore to stock ROM if backup and restore doesn't work properly (which I've seen a couple of times on MTK devices)
Update! TWRP works well, even backup and restore seems OK. Now to make a debloated ROM :good:
PS: Can someone explain the Overlay fix? I'm not sure exactly what this is supposed to resolve. I am using the 20161213 ROM.
After flashing the TWRP, tried to reboot to recovery but not working. How do I boot into recovery.????
I tried it in 20161213rom and 20170116 ROM!
donshady28 said:
After flashing the TWRP, tried to reboot to recovery but not working. How do I boot into recovery.????
I tried it in 20161213rom and 20170116 ROM!
Click to expand...
Click to collapse
What do you get when you turn your phone off and hold VOL UP + Power? Once I select "recovery" then it shows the Leagoo logo for a moment then boots right in.
When I turn the phone off, I hold the vol + and power and I get recovery, fastboot and reboot. I select the recovery using the vol down. But its keeps showing Leagoo logo
Okay. For whatever reason, it hasn't flashed the recovery properly - it sounds like it's missing. If you have the stock recovery, it shows the Leagoo logo for a moment, then shows the Freeme logo only (no text, just a logo). With TWRP it takes around 2-3 seconds for it to come up. It sounds to me that something went wrong when you tried to flash TWRP. What version of SPFlashTools are you using? Are you sure the right drivers are installed? Perhaps try another computer and USB cable and try with SPFlashTool again.
---------- Post added at 01:35 PM ---------- Previous post was at 12:55 PM ----------
Good news! I uploaded a debloated ROM. Link here: https://forum.xda-developers.com/android/development/6-0-lazy-s-debloated-rom-leagoo-m8-t3574816
It worked for my Leagoo M8 on second reflash with Pack-Flashtool-v5.1640.00.000.
After first attempt with original flashtool I had Freeme's hieroglyph and "no command" text.
Thank you!
Anyone knows if this can work for "Pro" version?