Did not see a thread on covers/cases etc.
I just bought a tempered glass cover:-
http://www.ebay.com/itm/401120474270?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Its crap tbh, ok with the phones curves you never gonna get a perfect fit tampered glass like I had for my previous Z3 compact but it does not even come close to the edge of the screen. Might not even apply it and perhaps send this back or at least complain to the seller, although was very cheap so prob will not bother. Nothing on the packaging mentions the phone which kinda makes me think is just some generic thing, even though on the page it says its specifically made for this phone, it clearly is not.
Just wondered if anyone had any more luck than me? I like my phone naked really but would tolerate a tempered glass cover that fits.
Nah, the tempered on I got was crap too, fitted to edge of screen and still had margins that didn't stick. Gone back to flexible protectors for now
Sent from my F5121 using Tapatalk
I got three glass screen protector direct from china during my visit, has the cutout for the front cam+sensor and the speaker on the top and bottom, the coverage does not cover the full screen as the curve edge prevents it, but the glass screen protector does reach and fully cover the active screen, cost me about USD .30 each.
I just ordered this, looks good, but need to see the actual item.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can we buy these online? @kms108
If you can post a link that will be great.
ali_bobo said:
Can we buy these online? @kms108
If you can post a link that will be great.
Click to expand...
Click to collapse
I never post direct links, the forum don't allow me to do this, just search in www.yahoo.co.jp or www.Amazon co.jp for Sony Xperia X performance.
kms108 said:
I never post direct links, the forum don't allow me to do this, just search in www.yahoo.co.jp or www.Amazon co.jp for Sony Xperia X performance.
Click to expand...
Click to collapse
I have already searched for cases but all I am getting is other silicon type ones.
Whats the exact wording of the one you have bought? @kms108
ali_bobo said:
I have already searched for cases but all I am getting is other silicon type ones.
Whats the exact wording of the one you have bought? @kms108
Click to expand...
Click to collapse
it's a screen protector, may be the ops should rename the title of the thread.:fingers-crossed:
ali_bobo said:
I have already searched for cases but all I am getting is other silicon type ones.
Whats the exact wording of the one you have bought? @kms108
Click to expand...
Click to collapse
me neither, anyway hopefully someone with postive experience of a tempered glass will come along at some point.
asab1 said:
me neither, anyway hopefully someone with postive experience of a tempered glass will come along at some point.
Click to expand...
Click to collapse
I received mine today and can confirm that the Tempered Glass does not have full coverage, aswell as the rear one too (rear facing is not tempered).
I shall post pics of the actual device tonight. I must say for what I paid I'm not impressed lol but I suppose it's doing the job, for now.
Sent from my Sony F5121 using XDA Labs
Here we are guys, sorry it's been a few days finally got round to taking some pics.
As you can see in the pic is the perfect square like bubble all the way around the screen...
But to make it a bit more positive I received my new earphones which match the colour of try device and I'm very impressed with them :good:
Sent from my Sony F5121 using XDA Labs
LevsOG said:
Here we are guys, sorry it's been a few days finally got round to taking some pics.
As you can see in the pic is the perfect square like bubble all the way around the screen...
But to make it a bit more positive I received my new earphones which match the colour of try device and I'm very impressed with them :good:
Sent from my Sony F5121 using XDA Labs
Click to expand...
Click to collapse
thanks, I have a few screen protectors that I need to try out, still haven't got my phone yet, they had delivery today, but not the rose gold that I pre ordered, oh well, not in a rush, I can still wait.
i have buy this three things. all nice.
https://www.amazon.de/gp/product/B01EUDN2PW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.de/gp/product/B01C5565QK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.de/fitBAG-Handyt...286766&sr=1-1-spell&keywords=fitbag+xpaeria+x
LevsOG said:
Here we are guys, sorry it's been a few days finally got round to taking some pics.
As you can see in the pic is the perfect square like bubble all the way around the screen...
But to make it a bit more positive I received my new earphones which match the colour of try device and I'm very impressed with them :good:
Sent from my Sony F5121 using XDA Labs
Click to expand...
Click to collapse
I got the same results with the cheap screen protector.
I have my new protector on, you can see photo's posted here in posted 8.
http://forum.xda-developers.com/xpe...screen-protector-thread-t3405081/post67561250
Anyone tried this?
https://www.alibaba.com/product-det...60483741197.html?spm=a2700.7724838.0.0.5ZXKIX
Seem good but min order is 10
icbless said:
Anyone tried this?
https://www.alibaba.com/product-det...60483741197.html?spm=a2700.7724838.0.0.5ZXKIX
Seem good but min order is 10
Click to expand...
Click to collapse
Try aliexpress , the active part does not stick to the screen.
ordered this in Black color- http://www.ebay.in/itm/182196910117...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Yet to receive
EDIT - Case is perfect fit and has nice grip.
recommend melkco leather case for xperia x cases, the leather and handmade quality really very good
I'm using a Nillkin flip cover for my XX. The leather feels good, and the case fits perfectly. It makes the phone look like a small notebook.
http://www.itasker.dk/images/Nillki...ver-for-Sony-Xperia-X-Brown-02062016-01-p.jpg
Still haven't found a screen protector that fits the 2.5d screen.
Hi guys, I just recently dropped my device with my plastic case on and my screen protector of course, the edge of the case has snapped and my screen protector is slightly shattered therefore I've had to order another case and screen protectors, this was on a warehouse floor from about 1 metre drop luckily my phone isn't damaged!
I've gone down a different route now, before I had the Terrapin smokey black plastic case (which fits well but feels cheap) and KlearLook tempered glass protectors, now here's what I've just ordered via Amazon!
1. YouSave Tempered Glass Screen Protector
2. ShockSock Sony Xperia X Neoprene Shock Resistant Pouch
3. Tudia Ultra Slim Full Matte Arch TPU bumper
Now I have chosen a pouch purely because I do not like storing my phone in my pocket at work as it can collect a lot of dust and dirt, after finding this pouch I was very interested as it comes with a clip for your belt or whatnot, it also says in the description that it supports the phone with a case on too which I found awesome, I went with a cheaper option on the screen protectors than I did before but the reviews for these seemed okay and the price is great. As for the Tudia case, I haven't used any of their products before but seen a fellow X user on YouTube using one of their armour cases (which I didn't want to go with, hense I chose ultra slim).
When my accessories arrive I shall post some pictures and a review ????????
Received my new goods and I can say I think the screen protectors were great for the price, fitted very easy no hassle either. As for the ShockSock it's awesome, with the TPU case it is a tight fit but if it's not on it's a smooth fit. Full coverage from the TPU case, great fit only downside I'd say is access to the power button/fingerprint sensor is a tad limited to what it'd be if the case wasn't on.
Waiting for the price of the official case to get knocked down in price lol
Related
Hey all,
I am in touch with the people at xoskins.com for a screen skin for the g tablet. I have sent dimensions and photos and they are in progress on the design. This would not be a dry application protector that has air bubbles and peels up around the edges. Their protectors go on extremely well. I have put them on several devices with a lot of success. One has been on my phone for a year and it still is all the way down around the edges.
When I get mine, I can post some shots of it. Hopefully we can generate some interest so they can make more.
How much did you pay ?
Nothing yet, but I am guessing it will be $20. I also just saw the skinomi one for $15 shipped in the US. They look to be pretty much identical. The packaging and spray are almost the same as the xoskins I have gotten before (just different graphics).
This screen protector skin is now available on xoskins.com for $18 using the code tabletprotector20. as soon as mine comes in i can post some pictures. like i said before, these have worked great for me in the past on othe devices. btw, I'm not getting kickbacks or anyhing, just spreadin the word.
How do the XOskins compare to the Skinomi ones?
Cocide said:
How do the XOskins compare to the Skinomi ones?
Click to expand...
Click to collapse
I think they are the same. I forgot to order the xo skin after I got the email the design was done. Anyway, ordered it now. Will update when it arrives and I can compare to my skinomi.
Just wanted to update that I got my xoskin. It is very much like the skinomi tech skin. I can hardly tell the difference. To me, I like the xoskin a bit better, I like the screen feel of it a bit better. Also, you can still get it for $20 shipped with the code from above.
ramerco said:
Just wanted to update that I got my xoskin. It is very much like the skinomi tech skin. I can hardly tell the difference. To me, I like the xoskin a bit better, I like the screen feel of it a bit better. Also, you can still get it for $20 shipped with the code from above.
Click to expand...
Click to collapse
Thanks, thats great to know.
ramerco said:
Also, you can still get it for $20 shipped with the code from above.
Click to expand...
Click to collapse
Which is 30% more than the skinomi , not sure if the difference in the texture would warrant the difference in price.
That said, its good to know there are other comparable alternatives there (once skinomi jacks up the price again or terminate their coupon).
aasoror said:
not sure if the difference in the texture would warrant the difference in price...once skinomi jacks up the price again or terminate their coupon.
Click to expand...
Click to collapse
Exactly my thought...
Screen Protector-Don't buy the military grade
I purchased some of these "military" grade screen protectors for the Evo 4g, but they really sucked to put on. So I searched on Amazon and ordered a matte one made by Aurum.
It's made from Japanese PET, which "supposedly" is the best, Got it a few days ago and it fit perfectly, more importantly there is no loss in sensation or sliding ability as it says. So I am happy, now I need a TPU case for it.
Traderny said:
I purchased some of these "military" grade screen protectors for the Evo 4g, but they really sucked to put on. So I searched on Amazon and ordered a matte one made by Aurum.
It's made from Japanese PET, which "supposedly" is the best, Got it a few days ago and it fit perfectly, more importantly there is no loss in sensation or sliding ability as it says. So I am happy, now I need a TPU case for it.
Click to expand...
Click to collapse
I see this is the same picture posted on amazon. How does it fit ? I can't see any cutting for the camera/sensors, do it cover the touch area or the whole bezel ?
Thanks,
No cutout for the camera/sensor, I put on the matte and it makes no difference that I can see. The Aurum screen protector on Amazon covers the ENTIRE bezel, so all the glass is covered (has the rounded edges for a tight tight fit). I attached a photo, don't judge me by my poor installation . All I care about is the smooth scrolling, and this achieves it, in my opinion.
I just saw they have a free shipping deal when you buy two.
Interested in drag component...
of the aforementioned protectors. The XOskin, Aurum, and Skinomi. Almost set to get a skinomi, but one complaint by some people is finger drag. How about the protectors the 2 of you have got? I'd almost forgo a protector if it's not going to give me a smooth surface. Thanks..
at least the XOskin HAVE the holes for the camera ans led flash and Aurum and Skinomi doesn't.
evoss05 said:
at least the XOskin HAVE the holes for the camera ans led flash and Aurum and Skinomi doesn't.
Click to expand...
Click to collapse
I was unaware that there was a flash for the G-Tablet, could you let me know where that might be .
As for the question above I can attest to the Aurum screen protector having very little finger drag(thats why I like it) and as to not having camera holes, well the 1.3 megapixel camera is not exactly great(I never use it). I use mine to browse the web, so finger drag is my main concern.
Aurum has a crystal clear one I think.....this will solve any camera issues. The link is below
http://www.amazon.com/VIEWSONIC-PRO...2?ie=UTF8&s=electronics&qid=1302440172&sr=8-2
evoss05 said:
at least the XOskin HAVE the holes for the camera ans led flash and Aurum and Skinomi doesn't.
Click to expand...
Click to collapse
Which skinomi are you talking about ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you post a pic of the xo skins fit? Is it good? I have used their skins before and they are by far the best. Just wanna make sure it will fit right.
I got the xo skins gtab screen protector There are cutouts for the camera and light sensor.. The install took me two minutes. Steamed up my bathroom after reading some install reviews to drop the dust out of the air. Ill post a full review on here in a bit.
New Protector with Stylus
I have purchased another screen protector for my G-Tab, this time the camera cutout was present, as before it was simple to apply, peel and stick type of application. I chose to go with the clear one this time, because I began to use a stylus with my tablets which I LOVE. The protector is simply a safety measure to prevent any accidental scratches.
So I ordered the ones from XtremeGuard Spartan Tempered Glass
http://www.xtremeguard.com/LG-G3-Screen-Protectors-p/lg-g3-screen-protector.htm#.U8CjKOXD-3g
And used the discount code and got them for 6.00 a piece. Havent got them yet but people are reporting that they are aligned horribly and requesting refunds.
So now I need another brand. I've always used spigen for my regular screen protectors. Never tired a glass one.. But there's plenty of brands out there..
Anyone make any recommendations based on the g3 or previous phones models that they used an glass protector on?
Ones I've looked at are:
http://www.amazon.com/Protector-Th...&sr=1-1&keywords=lg+g3+glass+screen+protector
http://www.amazon.com/Tempered-Scr...&sr=1-2&keywords=lg+g3+glass+screen+protector
http://www.amazon.com/Anti-Scratch...&sr=1-3&keywords=lg+g3+glass+screen+protector
http://www.amazon.com/Nillkin-Hard...sr=1-8&keywords=lg+g3+glass+screen+protector
Sent from my GT-N7105 using XDA Premium 4 mobile app
Sent from my GT-N7105 using XDA Premium 4 mobile app
I am using the one in your first link.
The Spigen GLAS.tR NANO SLIM , a bit pricy but I've used them on my last couple phones and love them.
I think Spigen glass products is so pricy, but, it's worth it I think!
I just ordered the Spigen. I went with it because it was so thin with rounded corners, it completely covers the top, and because I could get it with prime (I want to slap it on before I touch the new screen to ensure no smudges). Most don't seem to cover the top and that leaves an area for a crack to start, and probably doesn't look as nice.
I had planned on ordering the second link one which seemed better while cheaper, but it's not available now.
I stopped using screen protectors on my last 2 phones (Nexus 4 and Nexus 5). However, my Nexus 5's screen developed a couple of pretty nasty scratches over the past month or two. In an effort to not subject my G3 to the same fate, I did some research and went with the recommended Spigen GLAS.tR NANO SLIM Tempered Glass protector. It was definitely pricey but had excellent reviews and I was hoping to keep the feel of the stock screen, which these glass protectors supposedly mimic.
My phone finally arrived today so I immediately installed the Spigen protector before I even turned the phone on. It was significantly easier than what I remember from standard screen protectors and came out absolutely flawlessly. I was never able to accomplish this with regular screen protectors so I was very happy that the ease of install lived up to the hype. Overall the screen protector feels like the bare screen and you'd never know it was there, especially once the TPU case was installed.
While it is pricey, I imagine it will last quite a while, so it's worth it to me. I'd definitely recommend it.
**Ignore the thing that looks like a bubble near the bottom left of the screen, it was a piece of dust that wiped right off.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I goth this
http://www.amazon.com/gp/product/B00JV93WC4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Fits very nice and is thin, but it seems to pick up stubborn smudges rather easily. This is the first glass screen protector I bought so I don't know what to expect.
I just ordered this.
http://www.iloome.com/LG-G3-Screen-Protector-Flexible/dp/B00LFTMAHG
Sent from my Nexus 7 using XDA Free mobile app
I went with some glass from eBay, it was a doodle to fit and cost £8. Infinitely better than the screen protector that came from spigen (not glass), that seemed to smudge and was took hard to fit (bubbles)
Go with #3. Its the best for the money hands down. Trust me, you will not be disappointed and probably buy an extra after you get it.
Beware.. if you buy any of them with a big cut out rather than a separate cut out for the camera and speaker you will get a lot of dust collecting there. At least my nillkin one does anyway, apart from that its great.
Got the Spigen, seems be be the thinnest at .23mm
Thinking about upgrading to a glass screen protector. Has anyone had problems with trapping a rogue dust/fibre whilst applying? With traditional PET screen protectors its ok to lift up and get a bit of sticky tape to remove the dust/fibre that was trapped.
Thanks!
Wow that glass is fancy. I've never had issues with my usual clear stick on $5 3-packs from any brand out there on Amazon. I just change them out after 6mo to a year for a fresh look.
Actually, I'm big fan of Spigen......So I bought the case and glass screen protector for my G3.
I didn't apply the screen protector on my phone yet because I didn't get my phone.
But. I'll upload new updated comment after applying that.
I can't wait for my G3.
I got the SGP Nano glass and it works great. Just don't be a dumbass like me and try to wipe the sticky side when you mess up.
Does the spigen cover the front camera? If so does it obscure it at all?
kevina90 said:
Does the spigen cover the front camera? If so does it obscure it at all?
Click to expand...
Click to collapse
Yes. The only cut out is the speaker. Everything else is covered. It is crystal clear and I have seen no difference in before and after pics using it. Hell, if I didn't put it on I'd be hard pressed to tell it's there. 100% satisfied.
Lorimere said:
Yes. The only cut out is the speaker. Everything else is covered. It is crystal clear and I have seen no difference in before and after pics using it. Hell, if I didn't put it on I'd be hard pressed to tell it's there. 100% satisfied.
Click to expand...
Click to collapse
Totally agree! I have literally just put mine on. I mis-aligned the first time and had trouble trying to pry it off again, but luckily I got it off and re-applied no problem!
MICkingslayer said:
I think Spigen glass products is so pricy, but, it's worth it I think!
Click to expand...
Click to collapse
SGP glass is same as Glass4m protector, but the pricing Glass4m protector is more cheap than SGP.
Just $16.99
http://glass4m.com/product/glass-m-premium-tempered-glass-screen-protector-for-lg-g3
Sent from my iPhone using Tapatalk
I went with the skinomi: http://www.amazon.com/gp/product/B00L2PDY6O/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
It's $15 with Prime and has a lifetime warranty: The purchase of any Skinomi product including TechSkin and DesignSkin includes a lifetime replacement guarantee. Yes, you read it right! We are confident that Skinomi products are the toughest and the only film protector you'll ever need. If ever a properly installed TechSkin is scratched, torn, or damaged, we'll replace it free of charge.
The last glass one I purchased for my X ended up breaking from my keys and I had to replace it so I figure the warranty might come in handy. Not many reviews but they were both positive. Arrives Saturday and I I'll try to come back here and update with my thoughts.
I have just bought this tempered glass and I think this is so much better than the official one and it is a bit cheaper and has full adhesive around the screen.
https://www.youtube.com/watch?v=hRcGcrBK7rU
Amazon Link: Click Here to buy
Seems very good.
Send us somes pictures once u got it.
all tempered glasses with the black bezels are full adhesive around the screen...nothing special.
satand said:
all tempered glasses with the black bezels are full adhesive around the screen...nothing special.
Click to expand...
Click to collapse
I'll quote from the Amazon page..... "has complete adhesive throughout the protector rather than the edges".
It is different to others.
This item does not ship to the Netherlands.
i'll be damned
biohaz55 said:
I'll quote from the Amazon page..... "has complete adhesive throughout the protector rather than the edges".
It is different to others.
Click to expand...
Click to collapse
from my point of view it would make no sense to produce the glass with ugly black bezels if they would have completely invisible adhesive for application on the screen.
I've brought this one.
It's got huge bezels (the same as the official). If you can live with that great.
It lasted 5 minutes on mine before losing part of my screen annoyed me too much.
fards said:
I've brought this one.
It's got huge bezels (the same as the official). If you can live with that great.
It lasted 5 minutes on mine before losing part of my screen annoyed me too much.
Click to expand...
Click to collapse
Out of interest are you using a screen protector at all? If so which one? I've tried the Orzly (rainbow effect and dust) and also the Nilkin (full adhesion but big gaps) trying to find a happy medium really. I'm currently without a protector but using the Otterbox casing.
DaveP2611 said:
... I've tried the Orzly (rainbow effect and dust) ....
Click to expand...
Click to collapse
I'm not sure how you applied yours but I'm now into 3+ weeks with a Orzly and have had neither of the issues you mention, never did. I couldn't be more please with the Orzly protector especially at that price and still having a second one when the first eventually degrades. I used the application recommendation posted in that protectors thread. I personally could not tolerate a protector that reduced the visible screen for what ever reason.
Update: A spec of dust has gotten under the cover. Too bad as I still like the protector for its feel and protection but the spec of dust is dam annoying.
And now how to order it to Poland?
Zeuskk said:
And now how to order it to Poland?
Click to expand...
Click to collapse
Try to find a company in Poland that provides "virtual" address in UK and after that delivers the goods in your country. I receive goods from UK in Bulgaria for only 1 EUR (when under 1 kg.) - it is very convinient.
DaveP2611 said:
Out of interest are you using a screen protector at all? If so which one? I've tried the Orzly (rainbow effect and dust) and also the Nilkin (full adhesion but big gaps) trying to find a happy medium really. I'm currently without a protector but using the Otterbox casing.
Click to expand...
Click to collapse
I'm back on orzly.
Best of a bad bunch
This doesn't look very case compatible. Is anyone able to comment on this?
Very good tempered glass!
Sorry my english isnt perfect. Mine is come yesterday. I used a lot of others, but they where all disappointing in some way. (black turned into dark grey because of bad transparency and "sharp" edges) This one isnt case friendly I guess, because it protects the complete front.
+ true black colors
+ 2.5D (is quite cool for edge-smoothness)
+ easy to clean
- it isnt the thinnest glass
- makes bigger edges left/right
When you buy it make sure you buy the right one. It must be "Automatic Adsorption" version. They also sell another product where you get 2pcs of screen protectors (without automatic adsorption!).
https://www.amazon.co.uk/gp/product/B074SH4HZR
for poland users and eu -> https://www.amazon.de/gp/product/B074SH4HZR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've not had one, but did a search on Amazon.com (US) and found it here if anyone is interested. https://www.amazon.com/gp/product/B074PPMGQC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Rask2015 said:
This one isnt case friendly I guess, because it protects the complete front.
Click to expand...
Click to collapse
Any chance to try it with a bumber ? Sounds like a better option than the orzly tgsp but I'll need my bumper to work with it :angel:
Niekje84 said:
Any chance to try it with a bumber ? Sounds like a better option than the orzly tgsp but I'll need my bumper to work with it :angel:
Click to expand...
Click to collapse
I've got an original sandstone backcase and I think it will fit. Mine don't fit totally because it gets stretched by the skin I have on my oneplus. :/ But otherwise I think it will fit probably
Tip : amazon will give you the money back if you have problems with it and you mustn't send it back.
I just installed this tgsp and it's amazing. Very happy with it.
It's full glue. The main drawback is the bezel. But I'm used to it.
PS: it fits perfectly with the sandstone case from OnePlus
PShin said:
I just installed this tgsp and it's amazing. Very happy with it.
It's full glue. The main drawback is the bezel. But I'm used to it.
PS: it fits perfectly with the sandstone case from OnePlus
Click to expand...
Click to collapse
When you say the main drawback is the bezel, do you mean the bezel cuts off a small portion of the screen at the edges? Like if you were to boot into the bootloader, you can immediately see if the text is being cut off at the sides.
hy565 said:
When you say the main drawback is the bezel, do you mean the bezel cuts off a small portion of the screen at the edges? Like if you were to boot into the bootloader, you can immediately see if the text is being cut off at the sides.
Click to expand...
Click to collapse
Yes it's exactly what I wanted to say. But you get used to it.
Hi Dear all Xperia™ 1 Users, I am Mazellat and I am Sony user. Mazellat is very very old on XDA but XDA was banned me, I don't know reason. Anyway I bought Devilcasefor my Xperia™ 1 III. You can share also. Thank you...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is a video about Devilcase.
I bought a couple of cases from DevilCase as well, really nice stuff.
Devilcase can't send them to my country
OhayouBaka said:
I bought a couple of cases from DevilCase as well, really nice stuff.
Click to expand...
Click to collapse
How do the buttons on the side feel???
MrZippo1234 said:
How do the buttons on the side feel???
Click to expand...
Click to collapse
The volume and camera shutter buttons feel pretty nice and tactile, although the Google Assistant button being part of the frame less so.
OhayouBaka said:
The volume and camera shutter buttons feel pretty nice and tactile, although the Google Assistant button being part of the frame less so.
Click to expand...
Click to collapse
That's great to hear as the Spigen case I got makes the camera shutter button feel soft and spongy.
I ordered a devil case with extra buttons last month and still waiting for them to ship it.
MrZippo said:
That's great to hear as the Spigen case I got makes the camera shutter button feel soft and spongy.
I ordered a devil case with extra buttons last month and still waiting for them to ship it.
Click to expand...
Click to collapse
Yeah shipping can take quite a while, took about 2 weeks for me from Taiwan to the UK.
OhayouBaka said:
Yeah shipping can take quite a while, took about 2 weeks for me from Taiwan to the UK.
Click to expand...
Click to collapse
I am in the UK too, I placed my order about 2 weeks ago but just waiting for them to ship it
Is anyone using a case with a screen protector in one? Like the SCTH70 for XZ3.
I'm deadly afraid of scratching my screen with my keys or dropping it or whatever, so need something to protect the screen as well.
I've bought spigen clear hybrid case and spigen glass.
Disliked both
The case protect well but it's simply too bulky imho and ruin phone look.
The glass is good, it doesn't eat screen space like lot of cheap glass but i simply don't like glass with black border (i like full clear glass), but after a few days of use it the tempered glass simply lost a little piece on the black part.
I simply removed the glass protector and bought the slimmest cheap cover on amazon (ELYCO COVER) and i like it very much. Super slim with a little more protection for camera.
Probably this cover with became yellow very fast, but i can deal with that.
I purchase the gor protector, has a perfect fit.
Stockis said:
Is anyone using a case with a screen protector in one? Like the SCTH70 for XZ3.
I'm deadly afraid of scratching my screen with my keys or dropping it or whatever, so need something to protect the screen as well.
Click to expand...
Click to collapse
I just got these cheap glass screen protectors from Amazon, it has some sketchy reviews, but it was cheap. it actually worked out really well and I don't have any areas that aren't adhered. It just took some time to align it up. Take your time. Well worth the $7.
Amazon.com: [3-Pack]-Mr.Shield Designed For Sony Xperia 1 III [Tempered Glass] [Japan Glass with 9H Hardness] Screen Protector with Lifetime Replacement : Cell Phones & Accessories
Buy [3-Pack]-Mr.Shield Designed For Sony Xperia 1 III [Tempered Glass] [Japan Glass with 9H Hardness] Screen Protector with Lifetime Replacement: Screen Protectors - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Hello
i own the Spigen Rugged Armor and okay it's a good case with protection but just a little bit bulky.
I want a slim case (not the aramid one)
Does anyone use his device with a slim case with a good fitting?
micr0g said:
Hello
i own the Spigen Rugged Armor and okay it's a good case with protection but just a little bit bulky.
I want a slim case (not the aramid one)
Does anyone use his device with a slim case with a good fitting?
Click to expand...
Click to collapse
I bought Elyco cover off amazon. It's not a good brand but is ultraslim and with a little camera protection and fit the phone perfectly. If you smoke btw expect the cover to became yellow very fast XD
The Spigen cover made for older xperia and iphone are way better then the one for Xperia 1 III (i also bought the same you are using but it's too bulky for me)
I got both Spigen, Devilcase and GOR.
GOR case for slim feeling on hands.
Spigen is the greatest clear case but it will get old colour after a few mounth.
Devilcase has better protection with the same phone colour on border. The shutter button of this case very bad but luckily I found the way to get the naked feeling.
isnt the button supose to be double press to take photos.
Im guessing he has never used a real camera before. that behavior is normal. And also your before and after video does not show any difference between before and after. It looks the same, though the after video looks worse as it made the button less sensitive to pressing and can't tell the difference between focusing and taking a picture.
I'm in the USA and waiting for the phone to ship to me. I need tempered or glass protection for the screen. I keep looking on amazon but all I see are reviews with switched products. any one recommends one that's not shady?
Mowei
rabbitweed said:
Mowei
Click to expand...
Click to collapse
can confirm, works great
Im using the whitestone dome glass and works perfect me, I know some people do have issue with the FPS not being reliable, but I have no issues with the FPS and works perfectly fine for me.
It looks very similar to the one I have and also works great. IMBZBK.
https://amzn.to/42CJavE
2015Ducatimulti said:
Im using the whitestone dome glass and works perfect me, I know some people do have issue with the FPS not being reliable, but I have no issues with the FPS and works perfectly fine for me.
Click to expand...
Click to collapse
FPS? Frames per second? How a glass on top of device screen affects FPS!!??
Yo! so I have been using my s23u naked for the last 2 months and now I think i should get a glass protector to protect the screen since this will be expensive if I drop it... I am looking for something good and worth the price, some mentioned whitestone but that is 50 USD in sweden.. any other good options you are satisfied with that costs less? I do not want to use any case since that makes this sleek device fat and ugly (no body shaming pls!) but i guess the glass protectors are cool that can save the display from one or two drops..
saadC said:
FPS? Frames per second? How a glass on top of device screen affects FPS!!??
Click to expand...
Click to collapse
Not sure if you're trolling or are genuinely confused.
But just in case it's a genuine query, he means FingePrintScanner.
enigmaamit said:
Not sure if you're trolling or are genuinely confused.
But just in case it's a genuine query, he means FingePrintScanner.
Click to expand...
Click to collapse
Honestly every time I see FPS I think the same dam thing but then catch it. It happens
Yes,FPS( Finger Print Sensor)
Stay away from amfilm
Whatever liquid adhesive they're using is terrible
saadC said:
Yo! so I have been using my s23u naked for the last 2 months and now I think i should get a glass protector to protect the screen since this will be expensive if I drop it... I am looking for something good and worth the price, some mentioned whitestone but that is 50 USD in sweden.. any other good options you are satisfied with that costs less? I do not want to use any case since that makes this sleek device fat and ugly (no body shaming pls!) but i guess the glass protectors are cool that can save the display from one or two drops..
Click to expand...
Click to collapse
Ive tried a few and they are all **** or average in comparison with other brand that gives you a WELL placed protector from factory.
Ive email samsung about this BS ''save the planet so no protector nor charger '' ****, and we have to order , get ship by plane/truck , stuff, and found this is ****, and re-re-re-order.
Anyway, I got the Mowei UV glued protector, and the stikyness power is good as masking tape. If you get the phone in your pockets and the corner of the glass touch the pants, and will unstick.
Oh you think with a case it will be fine? no, cases are often soft, so they will contact the glass and unstick it.
It will create huge bubble. However, You can stick back the glass with minimal bubble left.
Protector are not only for protector the glass , but also the oleophobic coating. I use to have my phone naked, but after few years, the glass is full time greasy because it come a finger print magnet since the coating is gone.
10 days after receiving it, waiting on my Amazon protector shipment, was sitting and dropped my phone from my lap to hardwood floor .
Back top left corner had many small cracks running into the lenses
rockky said:
10 days after receiving it, waiting on my Amazon protector shipment, was sitting and dropped my phone from my lap to hardwood floor .
Back top left corner had many small cracks running into the lenses
Click to expand...
Click to collapse
Sad story bro. I always order a Spigen case as soon as I order the phone. Cheap insurance to tide me over until the case of choice becomes available.
I used this one here and so far it's been a good experience. You get the whitestone dome quality w/o the messiness. And I'm rocking it with the Ringke Onyx Case with no lift.
Mous....
KamfromCali said:
I used this one here and so far it's been a good experience. You get the whitestone dome quality w/o the messiness. And I'm rocking it with the Ringke Onyx Case with no lift.
Click to expand...
Click to collapse
Which one?
Two things I'd wish they'd do:
Stop with the curved screens. Tits on a bull!
Second, ditch the behind the screen FP reader. Put it in the power switch. Anyone that's owned a flip/fold knows how well they work.
Then we could have FLAT tempered glass screen protectors that stay put and look great for a long time.
Mous is nice, wish the carbon fiber one was in stock!
I use this when I want that naked experience and still have protection similar to a skin:
https://www.amazon.com/dp/B0BX79WKB9?psc=1&ref=ppx_yo2ov_dt_b_product_details
I have the same one on my iPhone 14 Pro Max and the phone fell off a chair onto a slate floor backside down and I thought for sure it was going to be a bad day. Nope, phone unscathed. Thought the case was OK too but later when I took it off it had a crack running all around the area covering the camera bump.
I got the UAG Pathfinder for the S23 Ultra, yeah it's on the bulky side but I probably could drop it down the stairs and it would be fine. ;-) That's what I use when working outside.
misteurz said:
Which one?
Click to expand...
Click to collapse
The Milomdoi 9H
nixvaldez said:
I'm in the USA and waiting for the phone to ship to me. I need tempered or glass protection for the screen. I keep looking on amazon but all I see are reviews with switched products. any one recommends one that's not shady?
Click to expand...
Click to collapse
Its better to use a Screen Protector Film because the device has a curved screen. I really dont know if there are any good Tempered Glass for curved screen so I went with a Full-Body Screen Protector from Gadgetshieldz since they not only have Matte options but their Full-Body covers the back panel, sides, top, bottom and also the camera module. I didnt want any scratches at all so I covered my phone completely with this. Went with the Clear for the Screen and the rest were all Matte cause I love the finish.
Although, recently I wrapped my S23 Ultra with skins cause I was getting bored of the look but I still have the Clear Screen Protector on.
Im in love with the grip they provide, feels soo good on touch!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}