INTRODUCTION
Hello guys, I would like to share with you unofficial builds of Darkobas ROM. I hope you like them.
INSTRUCTIONS
->Copy the ROM zip into your internal storage.
->Clean flash i.e., wipe Cache,Dalvik Cache,System,Data just to be sure.
->Flash ROM zip and then flash your preferred GAPPS.
->(Optional)Flash Supersu and reboot
ROM Features
Besides the features in the official builds, Here's a brief overview of the features incorporated into my builds.
->F2FS support(/cache and /data)
->Added a load of QuickSetting TIles.
->Live Volume Steps
->Allow unlocked USB data access(Settings->Storage and USB->Advanced)
->Expanded Desktop
->Snap Camera
->Battery bar
->Memory Bar
->QS animations ....and a bunch load of misc stuff which you can check out in changelog or my github page.
Kernel Features
->Multirom Support
->Cpuquiet hotplug by @DerRomtester
->Smartmax_eps governor
->Franco sound(can control ear piece vol etc)
->Fast charging and some misc stuff.
Note
Please be patient when you're are booting into this ROM as a secondary in multirom. It stays near the 1+1 splash screen for about 20sec and then it boots into the secondary.
DOWNLOADS
ROM: https://www.androidfilehost.com/?w=files&flid=107412
Gapps: http://opengapps.org (Choose arm, Android 6.0 and then your preferred variant.
SuperSU: http://forum.xda-developers.com/showthread.php?t=1538053 (2.52,2.64 or 2.67)
CREDITS
Firstly @darkobas for his ROM and kernel
Dirty Unicorns,
AICP and everyone kind enough to open-source their projects.
Contributors
INT3NSE07
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Source
https://github.com/INT3NSE07
Installing Substratum
-> As this is the first OMS build, clean flash is must.
1. Become a beta tester for Substratum and install it.
2. Install any of theme listed in the following doc https://docs.google.com/document/d/1kEbMgKdleKntSoeOKH91raM2P41ODodYpDgO7_l_ddg/edit
3. Choose any theme and then click on Compile/update.
4. After compilation process is over, select the overlays you want to install and click on Enable.
5. Soft reboot isn't required anymore and systemui will be restarted automatically.
6. Done.
For any further complications check this post out https://plus.google.com/u/0/+CharG/posts/NATVxZEHfge or watch this video https://www.youtube.com/watch?v=V7bPxYcqXbk&feature=youtu.be
Some useful links
Substratum Community: https://plus.google.com/communities/102261717366580091389
Browser: https://www.androidfilehost.com/?w=files&flid=44933 (credits @danieldmm)
Install browser then go to App Info->Permissions->Grant all permissions this should fix the google account sync.
MultiROM: http://forum.xda-developers.com/oneplus-one/development/mod-multirom-v26-t2835738
Changelog [6-08-16]
Very brief overview of changes.
* art/
f88820c Art: disable host clang by default
* build/
60d8fc0 Remove email
fcabe68 core: add a variant for kryo armv7-neon
fa111b4 core: combo: armv8-a: specific kryo tuning
43ff628 core: Allow board to specify additional flags
9ff31a0 core: arm: use -mfloat-abi=softfp instead of -msoft-float
00f89b3 core: arm64: special tuning for cortex-a53.a57
d21d962 Mark the cortex-{a7,a53,a53.57} chips as supporting LPAE
* bionic/
75d4c88 Merge remote-tracking branch 'pa/marshmallow' into cm-13.0
* external/jemalloc/
cfcfed8 Merge remote-tracking branch 'google/master' into android-6.0
* packages/apps/Settings/
640cefe Battery saver and low battery notification toggles [2/2]
09ddb73 Disable stroke
bb1245b Enable\Disable bluetooth battery status[2/2]
* frameworks/base/
85ca767 Battery saver and low battery notification toggles [1/2]
11b3341 Status bar: Update notification count icons
b983ec6 Show infinity for large notification counts
8252c4b SystemUI: small optimization for notification icon numbers
934397c Disable stroke
d18e269 Enable/Disable bluetooth battery status[1/2]
9771394 SystemUI: Display bluetooth battery status when available
* kernel/oneplus/msm8974/
423c3e6 Enable kexec
d2ff9ff kexec: update kexec hardboot patch for Android 5.0
1d42dad Implement kexec-hardboot
9c91e12 sound: add sound control to increase headphones, speaker and mic gain.
8786c32 Hardcode selinux to permissive at kernel level
a394f4d [Squash]Revert all camera changes Revert "msm: camera: Ensure CCI wakelock is always removed"
Nice
Sent from my A0001 using Tapatalk
darkobas said:
Nice
Click to expand...
Click to collapse
All thanks to you.
Cool. From which build onwards have branched from darkobas? Or both of you will sync?
Thanx darkabos
Best MM for OPO and OP3
way to go buddy
Sent from my ONEPLUS A3003 using Tapatalk
Awesome ... Thank you sir for sharing your work
thank you for your work , will try this.
Can we upgrade from installed darkobas or is clean flash needed?
Inviato dal mio A0001 utilizzando Tapatalk
Did you also ditch zram? And what about f2fs?
Wow looks really cool!
Going to test
joefso said:
Did you also ditch zram? And what about f2fs?
Click to expand...
Click to collapse
Yup I ditched zram(https://github.com/CyanogenMod/andr...mmit/87170a2ad70c347a5766fb764664f472ed347b6e) and about f2fs I added everything necessary but it still won't boot. Will try to fix it when I get the time.
INT3NSE07 said:
Yup I ditched zram(https://github.com/CyanogenMod/andr...mmit/87170a2ad70c347a5766fb764664f472ed347b6e) and about f2fs I added everything necessary but it still won't boot. Will try to fix it when I get the time.
Click to expand...
Click to collapse
I'm using f2fs on my cache partition with no problems. I haven't tried it on internal storage yet. Thanks very much for bringing this back, and with Sultans HAL.
Do you think you could also add some of jgcaap's optimisations? And will you support OTA updates?
INT3NSE07 said:
Yup I ditched zram(https://github.com/CyanogenMod/andr...mmit/87170a2ad70c347a5766fb764664f472ed347b6e) and about f2fs I added everything necessary but it still won't boot. Will try to fix it when I get the time.
Click to expand...
Click to collapse
Great I am running it now, about the f2fs I can confirm I had /data and /cache on f2fs. and it did not boot. I do like the smartmax_eps and the franco sound adds, however, I have noticed that the playback of voice recordings on whatsapp have this noise / ticking sound to it, can you reproduce this? side note I played it while restoring all my apps from the playstore - so it might be also due to the eps gov
Really like the wallpaper!
TugaBrowser work with this Rom ? Because this browser don t synchronise with my google account on Darkobas 2/06
You Keep LightingSultanRemix Kernel ?
forid200 said:
I'm using f2fs on my cache partition with no problems. I haven't tried it on internal storage yet. Thanks very much for bringing this back, and with Sultans HAL.
Do you think you could also add some of jgcaap's optimisations? And will you support OTA updates?
Click to expand...
Click to collapse
If you can point out to me his optimizations I may add them but no promises cause they tend to break other things. About OTA updates i'm looking into them and will you know when ready.
joefso said:
Great I am running it now, about the f2fs I can confirm I had /data and /cache on f2fs. and it did not boot. I do like the smartmax_eps and the franco sound adds, however, I have noticed that the playback of voice recordings on whatsapp have this noise / ticking sound to it, can you reproduce this? side note I played it while restoring all my apps from the playstore - so it might be also due to the eps gov
Really like the wallpaper!
Click to expand...
Click to collapse
Sorry but couldn't reproduce it. If anyone reports the same problem i guess i'll switch back to smartmax or a governor of your liking.
meph02 said:
TugaBrowser work with this Rom ? Because this browser don t synchronise with my google account on Darkobas 2/06
You Keep LightingSultanRemix Kernel ?
Click to expand...
Click to collapse
Install Tugabrowser then go to appinfo->Permissions->Grant all permissions.
Can anyone confirm if dirty flashing over darkobas may26 build is working ? oR should we go ahead with clean flash I know that's recommended
altruistic666 said:
Can anyone confirm if dirty flashing over darkobas may26 build is working ? oR should we go ahead with clean flash I know that's recommended
Click to expand...
Click to collapse
A clean flash is strongly recommended cause the settings have been messed with a lot. If you dirty flash i guess you may have some fc's
I juste clean Flash Darkobas this afternoon Only one clean flash by day looooool
Related
TL;DR
Sultanxda's Cyanogenmod CAF ROM + DerRomTester's Tyr-CAF Kernel / ak's CAF Kernel / RenderBroken's CAF Kernel modified to work on 2p F2FS (F2FS /data and /cache, keep /system on ext4 please!), this will not work on any other partition schemes! Scroll to the bottom of this post for download and instructions.
STATE OF PROJECT - Sorry guys, I have been inactive for a while due to work and money problems, finally got a bit of free time before work. I've updated the project to be inline with sultanxda's latest builds AND I have also added render kernel and ak kernel variants. Enjoy!
Introduction
Hello everyone, I've been around for a while, but have not had anything worthwhile posting as I spend most of my time tinkering with my own and other's phones and tablets as hobby. Some of the more interesting things I've encountered as of recent are CAF, which led me through many roms and kernel, and then eventually @Sultanxda's CAF Cyanogenmod Rom which is probably the best I have used in a long long time! However I am a big fan of the F2FS file system as well so I went ahead and put this together on my day's free time for myself, but I felt like sharing with those of you who might be interested.
Since @Sultanxda's amazing rom [ROM+KERNEL][5.1.1] Unofficial CyanogenMod 12.1 with CAF 3.4.0 kernel does not officially support F2FS I went ahead modified the fstab, updater-script and replaced the kernel with @DerRomtester's [KERNEL] [CAF] [UBERTC] Tyr-CAF Kernel as it has F2FS support and is originally based off of Sultanxda's CAF kernel.
UPDATE - I've added more flavors! This rom comes in ak and render kernel variants now!
So What is CAF?
CAF stands for Code Aurora Forums.
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
Click to expand...
Click to collapse
As explained in the AOSParadox Project page (A really cool project, vanilla CAF AOSP rom, definitely worth checking out).
So What is F2FS?
Wiki: F2FS (Flash-Friendly File System) is a flash file system initially developed by Samsung Electronics for the Linux kernel.
The F2FS file system boasts superior performance in comparison to the EXT4 file system (which is used as the default filesystem used for /data, /system and /cache) in /data and /cache (/system performs best with EXT4 file system). Click here for some benchmarks/analysis'!
What's so Great About @Sultanxda's rom?
I love this rom because of the strong emphasis put into stability and keeping it clean. Take a look at it's features (taken from here):
ROM features:
Based off latest generic CyanogenMod 12.1 nightly source
OTA updates via built-in CMUpdater
Vanilla CAF LA.BF.1.1.1_rb1.26 display HAL (improved display performance)
Vanilla CAF LA.BF.1.1.1_rb1.26 media HAL (improved video performance)
Vanilla CAF LA.BF.1.1.1_rb1.26 audio HAL (improved audio performance)
OxygenOS camera libraries (no camera bugs and improved camera performance)
Snapdragon Camera app by Qualcomm (comes with many unique features, such as high-speed recording with audio)
Custom camera HAL I modified myself from CAF featuring:
-Slow-motion video recording at 60 FPS, 90 FPS, and 120 FPS for 720p, and 60 FPS for 1080p
-High-speed video recording with audio at 60 FPS, 90 FPS, and 120 FPS for 720p, and 60 FPS for 1080p (you need to use the Snapdragon Camera app in order to use high-speed recording)
-1080p video recording with the front-facing camera
-2.5k 1440p video recording with the front-facing camera and back camera (only with the Snapdragon Camera app that comes with the ROM)
-4k video recording at UHD and DCI resolutions
-Manual focus
-Slow shutter (ranging from 1/5000th of a second to 2 seconds)
-More picture sizes than plain OxygenOS, such as 9.7MP 16:9
-JPEG quality is always set to 100% (pictures are very high quality)
Disabled Qualcomm performance daemon (CPU boosting is now handled completely by the driver I wrote)
2 CPU cores are not forced online all the time (saves power this way)
WiFi configuration from LG G3 (better WiFi performance and stability)
Many other misc. optimizations
Kernel features:
Based off latest CAF LA.BF.1.1.1_rb1.26 kernel source from Qualcomm
Almost 100% pure CAF (very clean, there shouldn't be any crazy stability or performance issues)
Removed lots of excessive debugging
Latest CAF LA.BF.1.1.1_rb1.26 prima (WiFi) drivers
Rewrote half of the Synaptics touchscreen driver (over 2500 lines of code modified; your touchscreen might work better)
Newest available Synaptics touchscreen firmware (no battery drain)
Dynamic CPU input boost driver I wrote myself (makes the phone feel smooooth)
CPU underclocked to 1958MHz by default (you can disable this; see why I did this in the FAQ in the 3rd post)
Improved notification LED color (white doesn't have a blue tint)
Vibrator is automatically disabled when recording videos (so the buzzing noise doesn't get in the videos)
Custom thermal driver I wrote myself (keeps the phone cool)
LCD KCAL by Savoca
Westwood TCP congestion algorithm (enabled by default)
NTFS support
No BS patches, features, or compiler "optimizations"
Many other misc. optimizations
Click to expand...
Click to collapse
Why use Tyr-CAF Kernel?
@Sultanxda's rom does not support F2FS out of the box. The first thing required to get f2fs support, is a kernel that supports it, that's where @DerRomtester's Tyr-CAF kernel comes into play. It's based off of @Sultanxda's original CAF kernel but offers more customization and F2FS support.
Differences to @Sultanxda's kernel:
- replaced Mpdecision with cpuquiet
- Stock CPU frequency table (no underclock by default)
- charge control ( i hope it is working)
- more I/O schedulers (bfq default)
- disabled Add Random, CRC, I/O Stats and Rotational for better performance
- francos sound control
- added option to enable/disable fsync
- default TCP algorithm: westood (enabled all available)
- added an option to enable/disable gentle fair sleepers (disabled by default for better battery + performance)
- tuned performance profiles
- PVS/SPEED level interface (you can see that inside synapse)
- GPU stats for each frequency
- change kernel compression to XZ
- tuned the LED color
- lowerd GPU voltage constraints
Click to expand...
Click to collapse
Want @ak's kernel instead?
ak is pretty well known for his great kernel work on the OnePlus One, his caf kernel now supports F2FS too! Check out his thread here!
@RenderBroken's linux 3.4.108 kernel! Bleeding edge and multirom support!
Like using bleeding edge kernels or need a kernel with KEXEC (multirom) support? Check out @RenderBroken's CAF kernel! Here is a quick overview of some of it's features:
* Linux 3.4.108
* Synapse Support - Complete Kernel Control!
* Built with Uber 5.2 GCC Toolchain
* MSM_Hotplug, Intelliplug, and MSM_MPDecision (Bricked) all flavored by @neobuddy89
* MSM_Limiter by @neobuddy89 - More like a Swiss army knife! adds Per-Core Functionality!
* New State Notifier Driver by @neobuddy89 !
* Franco's Simplified Thermal Control!
* Govs - Intelliactive, IntelliMM, Impulse, Yankactive, Blu_Active, SmartMAX, ZZMoove, Conservative, Lionheart
* IO Scheds - FIOPS, ROW, BFQ-v7, SIO, DEADLINE, NOOP, CFQ and ZEN Schedulers
* Franco Sound Control
* Frandom
* Complete Color Calibration Thanks to @savoca
* USB Fast Charge (ON/OFF Toggle)
* New LZ4 Compressor/Decompressor: Just plain fast!
* Added Sysfs for GENTLE_FAIR_SLEEPERS
* Quick Wakeup (More Info)
* FSync
* KEXEC Support (MultiRom)
* Adreno_Idler
* Power Aware Scheduling
* Voltage Control
Click to expand...
Click to collapse
Step by Step Guide and Downloads:
Step 1 (and Recovery download link)
Make sure to partition /data and /cache to F2FS first!
You need a recovery that supports formatting to F2FS to do this.
That means a modified version of TWRP or CWM.
You can find recoveries that support F2FS here. @katinatez recommends that you use his unofficial_twrp_2.8.6.1-bacon-dark.zip as it was the last version to support backing and flashing new modems, & firmware.
DO NOT USE TWRP 2.8.7.0 - TWRP v2.8.7.0 cannot properly update the modem
If using twrp (the one from above) you boot into recovery, go to wipe, advanced wipe, select Data, FS OPTIONS, CHANGE FS, F2FS, then swipe to wipe.
Do the same for cache; wipe, advanced wipe, select Cache, FS OPTIONS, CHANGE FS, F2FS, then swipe to wipe.
Step 2
Boot into recovery and wipe system, data and cache.
Download the rom (found at the bottom of this post).
Download lollipop gapps of your choice.
OPTIONAL:
Download UKM from the kernel developers respective master thread (check sources or tl;dr). You can install synapse or another kernel tweaker from the play store afterwords and tweak the kernel settings to your liking with this.
Step 3
Now to install the rom there are two methods. PS - This can take up to a couple minutes, do not be alarmed if you are on "patching unconditionally" for a bit.
Method A (mtp, easy way)
Enable mtp mode and put your rom and gapps on your phone.
Go to install, find the zips u saved to your phone and install them, rom first.
OR
Method B (adb, harder way)
If you have adb on your pc you can use this method.
Boot into recovery and go to Advanced > ADB sideload.
From you computer open up command prompt and enter the command
Code:
adb devices
to check if computer recognizes your phone.
If not install the adb interface driver manually for your phone.
Use this command to install zips from your pc (rom first):
Code:
adb sideload name_of_file.zip
Repeat with gapps (and ukm if you want it).
OR
Method C (OTG, unusual way)
You can use a usb-otg cable and a usb stick with the zips on it to install via twrp.
DOWNLOAD
Make sure you have read the instructions first!
- Tyr CAF Builds: Android File Host || Dev-Host
- ak CAF Builds: Android File Host || Dev-Host
- Render CAF Builds: Android File Host || Dev-Host
- All builds: Android File Host || Dev-Host || MEGA
Updating your rom
Download the latest build of this rom OPTIONAL download gapps again too (sometimes play service gets messed up for some reason, so I think it's a good opportunity to update your gapps too)
Save the zips to your phone (or you can use sideload)
Dirty flash the rom and then gapps. Wipe cache/art(dalvik) cache.
Boot system, and you good.
Version Information
Status:
ROM - Stable
Kernel - Varies
Kernel Source(s): DerRomTester's Tyr-CAF Kernel
ak's CAF Kernel
RenderBroken's CAF Kernel
Rom Source: Sultanxda's Cyanogenmod CAF ROM
Created 2015-09-12
Last Updated 2015-09-29
Credits: @Sultanxda (rom) @ak (kernel) @RenderBroken (kernel) @DerRomtester (kernel) @katinatez (recovery) @gulp79 (f2fs guide) @zaphodbeeb (f2fs guide) @osm0sis (android image kitchen) And Everyone Else who has Contributed to the Android Community and Development! Let me know if I missed anyone worth mentioning here!
I've tested and verified this to be working on my own phone! If you have any issues I would check the relative rom or kernel threads.
Screenshots! Now I've never judged anything by benchmarks because real world use is more important, but I thought it would be fun to post. I was getting 44k on antutu when I was on exodus rom with ak kernel. This my antutu score on default kernel settings with Tyr kernel v15 (my first build/release), I bet it can be tweaked for more!
Thanks for this wonderful work, gonna test it tonight for sure
Enviado do meu A0001 através de Tapatalk
---------- Post added at 11:05 PM ---------- Previous post was at 11:03 PM ----------
I cannot download it...
Enviado do meu A0001 através de Tapatalk
MegaDJPlay said:
Thanks for this wonderful work, gonna test it tonight for sure
Enviado do meu A0001 através de Tapatalk
---------- Post added at 11:05 PM ---------- Previous post was at 11:03 PM ----------
I cannot download it...
Enviado do meu A0001 através de Tapatalk
Click to expand...
Click to collapse
Download link is at the bottom of post, is it not working?
Try this:
http://d-h.st/NhOz
lemon07r said:
Download link is at the bottom of post, is it not working?
Try this:
http://d-h.st/NhOz
Click to expand...
Click to collapse
I click on the big "Download blue button" and it just opens the a new web page with the same download link... Anyway I'm doing it on Android, let me check on PC.
Enviado do meu A0001 através de Tapatalk
MegaDJPlay said:
I click on the big "Download blue button" and it just opens the a new web page with the same download link... Anyway I'm doing it on Android, let me check on PC.
Enviado do meu A0001 através de Tapatalk
Click to expand...
Click to collapse
Ah I see, I will upload it to a mirror in the meanwhile then so others don't have the same issue.
On pc it worked great... lol
Enviado do meu A0001 através de Tapatalk
Testing right away mate! Can i change to ak kernel?
madsponge26 said:
Testing right away mate! Can i change to ak kernel?
Click to expand...
Click to collapse
Originally I tried this with the ak caf kernel but got stuck in bootloops. However it is based off @Sultanxda's caf kernel as well so I assume it is supposed to work here, however I am not sure how well it currently support f2fs if it supports it at all. I went ahead with tyr-caf kernel as it already has good implementation in f2fs. You can always give it a try and flash back to the tyr-caf kernel if it doesn't go well.
Ak caf kernel:
http://forum.xda-developers.com/oneplus-one/orig-development/kernel-ak-t3189886
Tyr-caf kernel:
http://forum.xda-developers.com/oneplus-one/development/kernel-tyr-caf-3-4-07-07-2015-t3151971
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
As a third method will using a USB flash drive and otg cable work?
renaltosonylevi said:
As a third method will using a USB flash drive and otg cable work?
Click to expand...
Click to collapse
I don't have a otg cable to try this with, so I can't say. However I believe twrp does support otg (I might completely wrong) so if this is the case, yes you can use a flash drive and otg cable. I would go through the recovery setting to see if OTG is ok before going ahead and trying it.
EDIT - Yes you should be able to OTG, I see a mount option for USB-OTG in the twrp recovery. However I can't verify if it works.
EDIT 2 - I believe that's not the way you would do it though. If you go to install, and go back directories (all the way to root), there is a folder called otg, I believe if you have a usb-otg hooked up, it would be mounted here. So you would install from here. I will look into this a little more and update the master post once I find a verified method to installing through otg.
renaltosonylevi said:
As a third method will using a USB flash drive and otg cable work?
Click to expand...
Click to collapse
Yes It's working for me with usb flash or OTG method ... ( except with broken/corrupted usb flash drive )
Btw.., I'm using unofficial TWRP for multirom ..... :good:
This ROM feels great, smooth, battery life is excellent. Kudos to the developer.. Anyway I notice that multirom has some issues with the kernel. Although secondary ROMs installed OK, It boot straight to primary without showing boot preference..
Anybody experiencing this? Will try other kernels to make sure..
New version is out, can we expect an update today?
Enviado do meu A0001 através de Tapatalk
lemon07r said:
I don't have a otg cable to try this with, so I can't say. However I believe twrp does support otg (I might completely wrong) so if this is the case, yes you can use a flash drive and otg cable. I would go through the recovery setting to see if OTG is ok before going ahead and trying it.
EDIT - Yes you should be able to OTG, I see a mount option for USB-OTG in the twrp recovery. However I can't verify if it works.
EDIT 2 - I believe that's not the way you would do it though. If you go to install, and go back directories (all the way to root), there is a folder called otg, I believe if you have a usb-otg hooked up, it would be mounted here. So you would install from here. I will look into this a little more and update the master post once I find a verified method to installing through otg.
Click to expand...
Click to collapse
OTG does work on all my recoveries, with the exception of CWM. Also I recommend TWRP 2.8.6.1 dark because it still supports backing and flashing new modems, & firmware. Due to encryption introduced v2.8.7.0 no longer can do this.
MegaDJPlay said:
New version is out, can we expect an update today?
Enviado do meu A0001 através de Tapatalk
Click to expand...
Click to collapse
I'll get to work on it then, I will be updating around twice a week btw. Hopefully I will have it done and uploaded in a few hours.
katinatez said:
OTG does work on all my recoveries, with the exception of CWM. Also I recommend TWRP 2.8.6.1 dark because it still supports backing and flashing new modems, & firmware. Due to encryption introduced v2.8.7.0 no longer can do this.
Click to expand...
Click to collapse
Thanks for this, going to update my post with the relevant information.
Nice! Tried to enable f2fs on multiple caf roms but failed al the time, nice that you made a 'ready-to-go' f2fs version of Sultans rom!
One question, why not f2fs on system?
Miksel12 said:
Nice! Tried to enable f2fs on multiple caf roms but failed al the time, nice that you made a 'ready-to-go' f2fs version of Sultans rom!
One question, why not f2fs on system?
Click to expand...
Click to collapse
System works better with EXT4. See benchmarks.
Enviado do meu A0001 através de Tapatalk
lemon07r said:
I'll get to work on it then, I will be updating around twice a week btw. Hopefully I will have it done and uploaded in a few hours.
Click to expand...
Click to collapse
How's progress buddy?
Enviado do meu A0001 através de Tapatalk
MegaDJPlay said:
How's progress buddy?
Enviado do meu A0001 através de Tapatalk
Click to expand...
Click to collapse
Something came up and I had to head out, I'm still out right now so this will probably have to wait till tomorrow, sorry about that.
The CyanPop 6.0.1 Project
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Features:
CyanPopOTA
Android 6.0.1_r13
CyanPop bootanimations
All CM features
Compiled with RazorKernel as default kernel
Compiled with UBERTC 4.9.3
Ram bar to recent options
Statusbar clock font size
Second Clock support
Statusbar clock font style
status bar color option
Network traffic indicator
Show CyanPop in flashing
PackageInstaller: Show current & new version
Launcher3
Snapdragon Camera
CyanPopWallpapers
AdAway app prebuilt
About CyanPop and CyanPop maintainers in settings
Advanced Reboot SystemUI
CyanPop Logo in settings
CyanPop is starting
KernelAdiutor prebuilt
MarshMallow logo instead of 'No recent apps'
Update Alarm Files from N5 Factory Image
Update Effects from N5 Nexus Image
Update Dock/Undock Sounds from M Factory Image
Update Notification Sounds from N5 Factory Image
Update Material Ringtones to M from N5 Factory Image
Update VideoRecord & Wireless Charging Sounds to M
Use M Sound for LowBattery
Ensure M Camera Sounds
CyanPop is starting in first boot
LCD density setting
Enable MultiWindow for everyone!
More Battery Saver Mode Options
Enable non-market apps install by default, disable verifier
Allow faster app switching
Update frameworks-res.apk icon to a more appropriate icon
SwipeHelper: Let's cut Max Excape Animation in Half too
Speed Up Long Press Timeout
RazorKernel
Change SQL to improve performance.
Improve scrolling cache
Battery saver enhancements
Dev options enabled by default
wifi tab enabled by default
RazorKernel Features:
Added Darkness governor
Based on linux 3.10.94
LZ4 Compressor module
xz: Optimize Sfck Compression
block: Disable add_random
block: deadline: Optimize for non-rotational
drivers: usb: Use Android device as USB keyboard/mouse
Optimized SLUB memory allocator
Zram
ARM RWSEM algorithm
Enabled pipe flag.
Advanced TCP Congestions
support of exFAT
Overclock to 1.4 Ghz.
Many optimizations
Latest KCAL thanks @savoca
Enabled Conservative
Thermal limit control thanks to @franciscofranco
gpu Oc thanks @neobuddy89
Added BFQ
Lowered VFS cache pressure
Control vibration intensity thanks @Varun Chitre
Added more TCP congestion Algorithms.
And other
.
Governors:
.
Interactive
Conservative
Ondemand
Userspace
PowerSave
Performance
Darkness
.
Schedulers
.
noop
deadline
row
cfq
fiops
Bfq
What's working :
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Video Playback
Audio ( Record and Playback )
Sensors
Flash
Led
Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
8. Flash the gapps.
10. WIPE DALVIK/CACHE
11. Reboot Device.
Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
4. Install the gapps
5. WIPE DALVIK/CACHE
6. Reboot Device.
Download
BasketBuild- basketlink
Changelog
opengapps.org
Credits
Of rom:
RolanDroid: Rom Developer
CyanogenMod
Team CrDroid
Temasek
[*]@PartimusPrime: For his bootanimations
Of Device:
ketut.kumajaya
and others who worked hard to bring the base rom..
Otherhelps:
Sam Fischer (tushar Jain)
Aniruddh Chandratre
And my Beloved Testers
send a pm if i forgot you
Sources
CyanPop Sources
CyanPop Device Sources
Follow CyanPop!
which camera app to use in place of stock...??
Screenshots
saurabh1234 said:
which camera app to use in place of stock...??
Click to expand...
Click to collapse
Uses Snapdragon Camera
Any screenshot available? Many many thanks for your awesome work!
any more bug after camera bro.. .??
Kiran Anto said:
What's not working :
Camera Taking pictures using stock camera .. it freezes
GPS (device only) requires a signal lock from stock to function correctly or this.
Click to expand...
Click to collapse
thanks for this refreshment-rom!
1) guess that gps fix you suggested are adb commands executed in fasboot mode << are there any negative side-effects?
[didn't understand the first method, so i don't even dare to ask about it]
{finally, i got used living without gps using RR}
2) do you think this snapdragon might work? >> any other suggestion - if not?
i know you're investing all your time in "regular" CM 13, but would really appreciate if you don't neglect this one too
Can you tell me what to select in open gapps page, in order to download the correct file?
ARM or ARM64?
Android version 6.0?
Kiran Anto said:
Uses Snapdragon Camera
Click to expand...
Click to collapse
Can you give a link to Snapdragon camera? Does it work completely?
fforward72 said:
Can you tell me what to select in open gapps page, in order to download the correct file?
ARM or ARM64?
Android version 6.0?
Click to expand...
Click to collapse
You have to select ARM(it's for 32 bit systems).
ARM64 is for 64-bit system's.
arc7ful said:
Can you give a link to Snapdragon camera? Does it work completely?
Click to expand...
Click to collapse
its there in the rom...
Kiran Anto said:
its there in the rom...
Click to expand...
Click to collapse
Oh! ok. Does it work properly?
Heating up a lot please fix it.Otherwise its quite smooth.
Oh just saw your kernel thread and Facebook page. Got my answer!
...
@Kiran Anto
I am running this rom for about 24 hours and here is a few bugs i have noticed :
1) The camera bug is the major one.
(The snapdragon camera just takes photos and crashes on shooting videos)
2) Offline charging
(When the phone is switched off and plugged in to the charger the blue icon appears and the whole screen turns blue and starts flickering. You have to power it on to charge properly)
3) GPS
(I locked the gps from stock and then flashed the rom but still it fluctuates about my current location)
4) Random freezes
(The phone sometimes freezes for like 5 minutes and then comes back to normal)
PS : This should help you make this ROM more stable
God of War™ said:
@Kiran Anto
I am running this rom for about 24 hours and here is a few bugs i have noticed :
1) The camera bug is the major one.
(The snapdragon camera just takes photos and crashes on shooting videos)
2) Offline charging
(When the phone is switched off and plugged in to the charger the blue icon appears and the whole screen turns blue and starts flickering. You have to power it on to charge properly)
3) GPS
(I locked the gps from stock and then flashed the rom but still it fluctuates about my current location)
4) Random freezes
(The phone sometimes freezes for like 5 minutes and then comes back to normal)
PS : This should help you make this ROM more stable
Click to expand...
Click to collapse
ill fix it soon.. after newyear. probably. next update would be to fix camera.... imtrying..
and alll other bugs already fixed in my test builds..
Please give me proper link to minimal gapps required aftrr flashing this rom
I'm getting an error of insufficient storage along with the pico installer it is not getting installed.
Please help
Is this ROM still in active development?
@Kiran Anto is this project closed ??
Cyanpop latest version is 5.5
Any plans to update this ??
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Screenshots and Videos
Screenshots
Click to expand...
Click to collapse
What works?
WorkingBoot
Display/Brightness
Touchscreen
Audio
Wifi
S-Pen
Buttons/Lights
SDCard
USB Storage
GPS
Bluetooth
IR Blaster
Camera
DRM (L3)
SELinux Enforcing
Not workingMHL
Miracast
Not in the list? Report below
Click to expand...
Click to collapse
Other issues
(empty)
Click to expand...
Click to collapse
How to install
This ROM REQUIRES Lollipop bootloader. See this post to learn how to update your bootloader.
1. Download ROM and Gapps and transfer to device
2. Boot into recovery (TWRP recommended)
3. Factory reset
4. Install ROM
5. Install Gapps
6. Reboot to system
You can skip factory resetting ("dirty flash") if you're upgrading from Official LineageOS to a newer Official build.
Click to expand...
Click to collapse
Downloads
Official LineageOS ROM: https://download.lineageos.org/n1awifi
Gapps: http://opengapps.org/ [Recommended: ARM 7.1 Pico or Nano]
Root: https://download.lineageos.org/extras
Exynos5420 team ROMs (UNOFFICIAL builds):
ROM: http://download.exynos5420.com/LineageOS-14.1/n1awifi/
Old downloads:
https://forum.xda-developers.com/devdb/project/?id=16957#downloads
Click to expand...
Click to collapse
Note: n1awifi is the same device as lt03wifi - the SM-P600
Thanks to
Without these people this ROM wouldn't exist:
Exynos5420 dev team ( @deadman96385 @thompatry @ZakooZ @Orion116 @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588 )
@ShevT - For his work on the P601 (huge contributor to our current device tree)
@Raymanfx - First to bring CM to this device
Click to expand...
Click to collapse
Changelog
Current changelogs: https://download.lineageos.org/n1awifi/changes/
Old changelogs:
Code:
20170302
Fix bug where SetupWizard didn't have buttons
Lockscreen rotation setting added to Display->Rotation settings
20170222
Go official!
Fix video rescaling issue
SEPolicy fixups
Add noise suppression blobs
Enforce SELinux
20170130
Automatic screen brightness no longer enabled by default - zakooz
Enable our cache partition - zakooz
fstab: Mark cache, userdata as formattable - deadman96385
sepolicy: Update policies for media - cryptomilk + deadman96385
Doze fixups and tweaks - BadDaemon + deadman96385 + tincho5588 + zwliew
power: Use our kernel nodes - zakooz
Use NV21 color format instead of nv12tiled - tincho5588
ramdisk: fix s5p-smem ownership - tincho5588
Config: fix audio_effects.conf - tincho5588 + deadman96385
AudioFX: build the package again - tincho5588
20170113
Security patch: 05 January 2017
Enable "Samsung Doze"
GPU: Allow user under/overclock
GPU: Allow user thermal throttling points
GPU: Allow user voltages
20170107
Updated to LineageOS
Fixed microphone (Credit to @thompatry)
Fixed DRM
20161226
Update to final CyanogenMod sources (RIP CM)
Update to Android 7.1.1
December 2016 Security patch
Enable lockscreen rotation
Fix issue where the system was using the wrong audio_effects.conf
Enable advanced low power audio
Include Deathly Aduitor in installation
Increase maximum allowed charging current
No longer using haxes to avoid qualcomm telephony code
Update to 3.4.113 (from 3.4.112)
Update IR driver to samsung LL
Deathly Aduitor no longer complains about outdated kernel
Update Sound effect libs from T705XXU1ANF8 (Samsung MM)
Update mobicore from T705XXU1ANF8 (Samsung MM)
20161201
Major restructure and reorganization (now using exynos5420-common)
Updated audio configuration to official lollipop
Fixed offline charging
Updated audio blobs to official lollipop (kitkat bootloader has no problem with this)
Enabled US 5GHz wifi bands
Updated everything except for GPU driver to samsung's official Marshmallow sources (From klimtlte)
Allow apps to see and control:
USB charging currents
S-Pen Power Saving Mode (turn off S-Pen detection if it is inserted)
All the CPU thermal throttling points
S-Pen booster (increase CPU frequency when the S-Pen touches the screen)
Touchscreen booster (increase CPU frequency when a finger touches the screen)
Capacitive button booster (increase CPU frequency when a finger touches the buttons)
20161113
Fixed bug where buttons would light up even if lights were disabled in settings
Fixed bug where software buttons were enabled by default and restored option to disable them in Settings->Buttons
Camera fully working without crashes
Android security patch: 5 November 2016
20161107
Updated to CM14.1 (Android 7.1)
Fixed camera (but it's quite unstable)
20161030
Fixed battery stand-by problem introduced in previous build
Fixed HD video playback
Audio should crackle less
Now including Cyanogenmod Setup Wizard
Fixed possible system hang and reboot on first-boot
Enabled freeform windows
Improved system UI smoothness
Improved button lights HAL
Enabled strong stack protection
20161008
IR Blaster fixed? I can't test this because my IR emitter is faulty
Disabled doze - our device doesn't properly support this and it will actually decrease battery life
Updated default CPU governor and I/O scheduler configuration - battery life should be vastly improved if you weren't use custom CPU governor settings
Updated and enabled sdcardfs - Testing, storage should work better though
Many clean-ups in the device configuration
Removed system dependency on qualcomm ext-telephony (currently a mess on wifi-only-non-qualcomm devices)
Builds are about 50mb smaller (first boot is longer though) (give me feedback on what you prefer!)
Security patch - October 5, 2016
20160925
Fixed Bluetooth
Fixed Flashlight (and camera preview)
Fixed Settings app crash
Small fixes to RIL (lack of) and WiFi
20160916
Fixed GPS
20160915
Fixed audio
Fixed video rendering
Security patch - September 6, 2016
20160908
Initial release
Click to expand...
Click to collapse
Source code
Device: https://github.com/LineageOS/android_device_samsung_n1awifi
Kernel: https://github.com/LineageOS/android_kernel_samsung_exynos5420
Exynos5420 team: https://github.com/exynos5420
Click to expand...
Click to collapse
XDA:DevDB Information
SM-P600 LineageOS14.1 Official, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
ZakooZ, https://github.com/exynos5420
Source Code: https://github.com/LineageOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LL bootloader
Based On: LineageOS
Version Information
Status: Stable
Created 2016-09-08
Last Updated 2017-06-22
FAQ
Before using the ROM:
Q. Can I have an ETA for the next build?
A. This ROM is scheduled to build every Thursday at 8 AM GMT. The download becomes available 1 to 5 hours later. If the build fails then you have to wait until the week after.
Q. Does this ROM support custom kernels?
A. No. You can still use them but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them.
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports while using it as Xposed can cause a lot of bugs.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet available for nougat, however when it is ready you will need to use the version arm sdk 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post..
Q. What TWRP versions are supported?
A. ShevT's. Check out this thread for the TWRP download.
Q. Can the builds be dirty flashed over each other?
A. Yes if you're on Official builds.
Q. How do I dirty flash builds on top of old (working) ones?
A. Flash the ROM zip only (no gapps, don't wipe data).
Q. Will this work on Kitkat bootloader?
A. Read the install instructions.
Using the ROM:
Q. How do I enable software buttons?
A. Settings->Buttons.
Q. How do I change my Menu button to a Recents/AppSwitcher button?
A. Settings->Buttons.
Q. Do I need to provide a log if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a log.
Q. How do I get a logcat, and what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control
GPU Voltage Control
GPU Governor Control
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Thanks for working on CM 14. You will make it compatible with LP Bootloader or you are still on KK Bootloader? Because with the LP and M AOSP roms we had to stay on KK Bootloader to avoid sound, spen and reboot issues.
Stogie87 said:
Thanks for working on CM 14. You will make it compatible with LP Bootloader or you are still on KK Bootloader? Because with the LP and M AOSP roms we had to stay on KK Bootloader to avoid sound, spen and reboot issues.
Click to expand...
Click to collapse
It currently works on top of the CM13 device specific code so it's probably best to use KK bootloader. Making it compatible with LP bootloader is difficult and not a top priority at the moment
The Rom is working in lp Bootloader, unfortunately not so well. Where can I get the kitkat Bootloader?
The Google App is not working for me
wulkanat said:
The Google App is not working for me
Click to expand...
Click to collapse
I don't have issues with google apps. Try flashing KK bootloader like this: http://forum.xda-developers.com/gal...cial-build-t2980604/post65631142#post65631142
Regardless, a more stable build is coming in the next few days, with better compatibility for exynos
ZakooZ said:
I don't have issues with google apps. Try flashing KK bootloader like this: http://forum.xda-developers.com/gal...cial-build-t2980604/post65631142#post65631142
Regardless, a more stable build is coming in the next few days, with better compatibility for exynos
Click to expand...
Click to collapse
Wow, the Rom is now very smooth, only with the standard gapps there are many fc and you cant sign in a google account.
Great work so far, excited for the stable build! No crash on gapps for me , everything felt pretty quick for an early build.
How about for note n8010
Plz
shukenmg said:
How about for note n8010
Plz
Click to expand...
Click to collapse
The new Note 10.1 is completly different from the Old one, so you are in the wrong thread. Don't expect too much, the n8000 is a very Old device.
New build
cm-14.0-20160915-UNOFFICIAL-n1awifi.zip
Fixed:
Audio
Video rendering (in Youtube and such)
Settings app now has cyanogenmod stuff (don't expect the settings to work) (root works)
New build
cm-14.0-20160916-UNOFFICIAL-n1awifi.zip
Fixed:
GPS (with help from @deadman96385)
Links are dead?
Edit, nevermind. Being dumb.
Few things I've run across.
1) Cannot add a second Google account.
2) Status bar battery settings don't take. Tried adding percentage next to portrait icon but won't display.
And FYI, root is baked in. Trying to use SuperSU ended in a boot loop.
angus242 said:
Few things I've run across.
1) Cannot add a second Google account.
2) Status bar battery settings don't take. Tried adding percentage next to portrait icon but won't display.
And FYI, root is baked in. Trying to use SuperSU ended in a boot loop.
Click to expand...
Click to collapse
1) 2) will be fixed by Cyanogenmod in the coming weeks, all I can do about that is wait until they update their code to support Nougat
Yes root is already baked into the developer options
ZakooZ said:
1) 2) will be fixed by Cyanogenmod in the coming weeks, all I can do about that is wait until they update their code to support Nougat
Yes root is already baked into the developer options
Click to expand...
Click to collapse
No problems. I appreciate all the work. I'm just reporting what I've found. Ya never know what might fall through the cracks. :good:
Awesome, dev, thank you!!!! Only for P600? Don't works on P601, right?
kryzeK said:
Awesome, dev, thank you!!!! Only for P600? Don't works on P601, right?
Click to expand...
Click to collapse
Should work on P601, but try at your own risk (RIL won't work for sure)
Build 12/01/2019 #OPO #N
TugaPower ROM G+
Telegram Group: https://t.me/TugaPowerOPO
#TugaPower N 65.0 LineageOS #laos #OnePlus #Android 7.1.2r36 #OMS7 #SubstratumRootLess
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
Please be sure you are using one TWRP that can handle firmware flash. ( http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366 )
Also be sure you are using proper firmware. The one recomended its the one from cm 13 nighly, you can find here: https://meocloud.pt/link/c1d9a297-e3f7-480b-9567-1bc601c073dd/TugaPowerFirmwareCM13_v4.zip/
Relative to gapps, testing open gapps 7.1 nano package, working without issues
http://opengapps.org/?api=7.1&variant=nano
Replaced built in OTA by OTA Updates app ( https://github.com/MatthewBooth/OTAUpdates )
Replaced audiofx with Viper4Arise 2.4 ( https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 )
Disable manually AudioFX to hide the icon from drawer
Kcal Support ( use Color Control app to adjust colors )
Gello removed and replaced by latest TugaBrowser ( built in OTA for the Browser ) ( blocks ads and protect privacy)
TugaBrowser -> http://forum.xda-developers.com/android/apps-games/app-tugabrowser-t3472457
Call Record
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/android/apps-games/app-microg-gmscore-floss-play-services-t3217616 )
No more need to make microG system app
Multi-ROM Support
Increase max chg current to 2000/500mA
Kernel permissive
PoGO: Gonna catch then all
Partial screenshot ( activate screenshot on power menu button and long press there to activate partial screenshot )
Full support to Substratum OMS7 RootLess
Powered by Magisk root v16.x
Replaced Trebuchet with latest Lawnchair beta ( https://github.com/Deletescape-Media/Lawnchair )
3 finger screenshot support
What does not works:
Let me know to add here
Be sure you dont have an older Magisk module called Android Pay Fix on Magisk or NFC will start to FCing
Change log N65.0 :
Project name: android
December Security Patch
Updated Lawchair to Alpha 783
Updated Magisk Cannary Release to latest version
( use https://bit.ly/2N8UVlq in custom magisk channel )
Project name: android_external_v8
Remove unrecognized compiler flag
Revert "Backport: Fix Object.entries/values with changing elements"
Project name: android_frameworks_av
CTS error while media dump()
Project name: android_frameworks_base
Recover shady content:// paths.
Pass userId through to singleton ContentProviders
This android version is the last update, no more updates to Nougat
It was a long run...
Thanks all for the support.
Download: https://tugapower.net/TP/OP1/NOUGAT/TugaPowerN65.zip
MD5: 272a0ea5dd43041d0b45a11f1470c8bb
Please dont mirror for now the roms zips, thanks
Sources :
Rom:- https://github.com/LineageOS
Kernel:- https://github.com/LineageOS/android_kernel_oneplus_msm8974
Yeah, downloading. Android 2.3 GingerBread, i was waiting so many time for this, thanks!
UPDATE:
Installed and booted. First impression: this is not 2.3 GingerBread, i've been tricked by daniel.
Alright, in case some people want to know some first impressions:
Everything is working fine, even the backlight hardkeys.
It has some features like CM13: livedisplay, privacy guard, in-root working, custom action buttons and some other stuffs.
You can directly flash the rom with the gapps and it will not show any error (tested with opengapps nano 09/17/2016). Also flashed viper4andoid with no problem.
Adaway working with no need to install busybox.
A bug i found is that i cannot change the custom battery icon from the CM options.
To be the first build it's really great. The only things i miss are CM Theme manager and KCAL control but i'll be patient to see them in futures updates.
Thanks for the work daniel.
UPDATE 2:
With the purpose to clarify some possbile doubts i'm going to say what you need to do to get KCAL color control, Multirom support and themes. This might be useless in future updates.
Although it's not recommended so it can affect the stability and perfomance of the rom, if you are desesperate (like me) to get this features you can follow this steps. Do not report bugs to daniel related to kernel, storage, interface or FCs that could be related to the following steps if you follow them, you're using mods unrelated to the rom.
-For KCAL color control you need to flash a custom kernel compatible. I've tested Radioactive kernel and works with no problem. I repeat: This is not recommended because might cause incompatibilities, but just in case you want to get KCAL and other features related to kernel you can do it at your own risk to bugs.
-For flash it as secondary rom with multirom follow the steps from @venky716 and give him thanks: http://forum.xda-developers.com/showpost.php?p=68727289&postcount=37
Edit: KCAL control and MultiROM support already implemented.
-For themes i installed substratum. What you can do and what you can't do: You can use the theme manager with user apps like whatsapp, kernel adiutor, twitter, etc but if any change is implemented in system components you could get a boot-loop. I didn't tested system apps but i would not recommend it.
Good job Daniel. Downloading now.
Best ROM ever.
Very cool.
Sent from my A0001 using XDA-Developers mobile app
Thank you very much for this build and your hard work. I'll give it a try.
Sent from my A0001 using XDA-Developers mobile app
CM kernel?
Sent from my A0001 using Tapatalk
Thanks for work! Did NFC working?
Sent from my A0001 using XDA-Developers mobile app
This is amazing. Sorry to say but I didn't liked your 6.0 builds. Don't know why. But definetly I'm going to try this out.
Any suggestion? Should I be F2FS or EXT4?
How I can login into your browser?
Another Android 7 ROM for OPO by a great dev! Thank you for your work! Will try it soon!
thnx for effort
downloading now...
thanks for building this rom...
Hi,
first of all thank you for your work @danieldmm.
Flashed it right now and currently using the system.
Great work so far. Got system as ext4 and data and cache as f2fs formatted and it works.
However, "Anomalies" i have witnessed so far:
1. Settings -> Status Bar -> Hitting "Status Bar Icons" crashes and opens Settings again.
2. Changing the Battery status style does not change the icon
3. Camera crashing instantly after u open it.
Thats all for now since i did not use the system long but will report further bugs if any occur.
I should wait for tomorrow to do this. But will I ...
Gesture typing on aosp keyboard doesn't work ATM... Using google one instead
f2fs compatibility?
edit - i would think at this early stage a pointer to the gapps that works is probably a good thing. my thought is that as a developer point to the preference of what you have built.
and then you run away from what should I get?
milomak said:
f2fs compatibility?
Click to expand...
Click to collapse
data and cache, will test on system on my next release...
but tuga i think point a link to the gapps you used. in your op. or are they included in your download?
i've used and contributed to you.
but i think this needs to be clear
edit - only because as we move from place to place, some have have. some don't.
Weird. I can't receive snapchat sms for auth :/
milomak said:
but tuga i think point a link to the gapps you used. in your op. or are they included in your download?
i've used and contributed to you.
but i think this needs to be clear
edit - only because as we move from place to place, some have have. some don't.
Click to expand...
Click to collapse
It's written. Gapps advised it's Open Gapps Nano Package. Obviously the package for Android 7.0. Tomorrow will add the info on the thread to be more explicit. Cheers
Also notice at least for Google messenger when you pull down from status bar to reply to a text the notification doesn't go away
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Known Issues
sound 2 skeakers only for now
power drain (tablet is not in deepsleep, it's almost all time in the awake on min 300 freq)
Links:
3: 20180615: June security patch level, selinux enforcing now, sound from sources (call working, one problem with sound from sources - only 2 bottom speakers now), add samsung softkeymaster for encryption: https://drive.google.com/file/d/1oxSzYpovvU8itgO_AdjJ9-s8nr8ZA5oV/view?usp=sharing
2. 20180530: fingerprint, new samsung doze: https://drive.google.com/file/d/1qTu6xXcDVMf04L-2Wo8oGghleKW5JT1V/view?usp=sharing
1. 20180529: https://drive.google.com/file/d/1IPYpyVodYMxvAdSc_MjraVlAaqW_lZUR/view?usp=sharing
TWRP:
Use twrp from https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
or my repack: https://drive.google.com/file/d/1KyX6xZ8WrcNyHo73-lHhU2dZjX0KFJc1/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM64
Android: 8.1
Variant: any, usually I'm using micro or nano
Sources
Sources: https://github.com/resurrectionremix
Kernel: https://github.com/bonuzzz/android_kernel_samsung_gts3l
Initial device tree: https://github.com/Valera1978/androi...msung_gts3llte
and https://github.com/bonuzzz/android_d...msm8996-common
Thanks
Thank to my good friend @bonuzzz
Thanks to ResurrectionRemix team
Great to see some more rom development! Can you make it work on the T820?
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
Great to see some room rom development! Can you make it work on the T820?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
During next month. Los and RR.
bonuzzz said:
During next month. Los and RR.
Click to expand...
Click to collapse
That'll be cool.
Sent from my [device_name] using XDA-Developers Legacy app
This is so awesome! Out of curiosity, will this ROM/kernel prevent the tablet from charging when it's too cold/hot like the Samsung ROM does?
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Thanks
Thank to my good friend @bonuzzz
Thanks to ResurrectionRemix team
Click to expand...
Click to collapse
I've used the rom for the last 24 hours and it's astonishing.
Congratulations to both bonuzzz and you. Great work!!!
I was really dissapointed with stock Oreo. It was slower than stock Nougat and less responsive.
This rom on the other hand is super fast and responsive.
Battery consumption is at least on par with Stock nougat.
So far it's rock solid. The only stuff that didn't worked for me is fast charge.
Will report more on the next days. And a couple of beers to you guys.
I've used the rom for 3 days. So far so good. Have not found obvious bug yet.
S-Pen works?
Enviado do meu LG-H990 através do Tapatalk
Is this ROM pre-rooted or will I have to manually flash Magisk after flashing the Rom and Gapps?
does fast charging work in this rom?
Is a T820 port expected?
Hyped up with this rom, it was a daily driver in my previous phones
Will this ROM work on the SM-T825C?
Will this ROM work on the SM-T825C? This "C" version is the Chinese/Hong Kong version, and it has LTE (GSM) capability.
If not, do any of you know of any 3rd-party ROM's that can be flashed onto the SM-T825C?
Thank you in advance.
.
Can you get 20180719 updates?
coolguy001 said:
Can you get 20180719 updates?
Click to expand...
Click to collapse
I think updates will come when OP finish his work with Lineage
seems Lineage 0719 is posted. Does it resolve fast battery drain problem. My tablet battery drain 40%-60% overnight.
Hello friends,
now my build server generate every second day a new nightly unofficial RR 6.1 for the T825 (gts3llte) device.
Features:
- rom: with RR ota updater
- kernel: add wireguard support
- kernel: maple, zen, sio and fiops i/o schedulers
- kernel msm8996: overclocking frequencies (1,728,2,2656 GHz)
- kernel: add mdss: kcal: Add KCAL support for post processing control [v2]
- kernel: wakelock blocker
- kernel: Set westwood as default TCP congestion handler
Thanks to @Valera1978 for the device, kernel and vendor sources.
Download: http://luis-builds.de/downloads/lineageos/rr/Samsung_Galaxy_Tab_S3_(gts3llte)/
Thanks
Frank
8224Freak said:
Hello friends,
now my build server generate every second day a new nightly unofficial RR 6.1 for the T825 (gts3llte) device.
Features:
- rom: with RR ota updater
- kernel: add wireguard support
- kernel: maple, zen, sio and fiops i/o schedulers
- kernel msm8996: overclocking frequencies (1,728,2,2656 GHz)
- kernel: add mdss: kcal: Add KCAL support for post processing control [v2]
- kernel: wakelock blocker
- kernel: Set westwood as default TCP congestion handler
Thanks to @Valera1978 for the device, kernel and vendor sources.
Download: http://luis-builds.de/downloads/lineageos/rr/Samsung_Galaxy_Tab_S3_(gts3llte)/
Thanks
Frank
Click to expand...
Click to collapse
Wow! Super cool! Can You also build an Aosp or omni? I would paid for it
Does this Rom support fast charging?
8224Freak said:
Hello friends,
now my build server generate every second day a new nightly unofficial RR 6.1 for the T825 (gts3llte) device.
Features:
- rom: with RR ota updater
- kernel: add wireguard support
- kernel: maple, zen, sio and fiops i/o schedulers
- kernel msm8996: overclocking frequencies (1,728,2,2656 GHz)
- kernel: add mdss: kcal: Add KCAL support for post processing control [v2]
- kernel: wakelock blocker
- kernel: Set westwood as default TCP congestion handler
Thanks to @Valera1978 for the device, kernel and vendor sources.
Download: http://luis-builds.de/downloads/lineageos/rr/Samsung_Galaxy_Tab_S3_(gts3llte)/
Thanks
Frank
Click to expand...
Click to collapse
Awesome! trying this out now and can't wait to see where you take it. :highfive::good:
oh wait this is only for the LTE version
Xshooter726 said:
Awesome! trying this out now and can't wait to see where you take it. :highfive::good:
oh wait this is only for the LTE version
Click to expand...
Click to collapse
I have only my T825 for developing.
Is there then a greater interest in a version for the T820?
Cu Frank