CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
What's working:
Wifi (connection, WiFi Direct (testing), tethering, etc...)
Bluetooth
RIL (Calls, SMS, mobile data for both SIMs)
Storage (both internal and external)
ART (but don't use this as daily because some apps could FC due to compatibility)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS (both ART and normal gapps)
Tethering (USB, Wifi, Bluetooth)
Hardware rendering
Camera
Torch (flashlight)
GPS
Video codecs
Sound recording
BUGS/Not working
While making calls, only speaker is being used
AAC encoder doesn't work in Camera, change to AMR-NB first before recording, else you can't
Same as CM13 (except audio bug and FM) (see the thread for fixes if available)
BUGS REPORTS ARE GREATLY APPRECIATED.
*Before reporting bugs please include logcat to help us solve the problems easier
This ROM is suitable for daily use
First time installing CyanogenMod 11.0 to your Galaxy Core Prime, or coming from another ROM:
Install ClockworkMod Recovery (OR TWRP)
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using ClockworkMod Recovery (OR TWRP)
Optionally install the Google Apps (GAPPS)
*NOTE: If you're running TWRP recovery, go to Settings >> "Use rm -rf instead of formatting" before wiping anything, else you have to wait 20 mins due to some weird bugs of our eMMC (maybe)
ROM
Click to expand...
Click to collapse
LITE GAPPS (7,87MB): Link
GAPPS FOR ART RUNTIME: Link
ROM: Link
Credits:
@Dreamstar for his TWRP and CWM recovery
Sammy for the phone and kernel
Forgive me if i forgot someone
XDA:DevDB Information
CyanogenMod 11, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar
Source Code: https://github.com/koquantam/android_device_samsung_core33g/tree/cm-11.0
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2016-07-13
Created 2016-06-25
Last Updated 2016-07-12
F.A.Q
1. Why i'm getting bootloops after only wipe data w/o /data/media internal storage?
A: Because sometimes, our /data partition is corrupted, so full wipe is possible.
2. Do i get OTAs everyday?
A: No! Because we're not get this to official, so no OTAs
3. Is init.d supported?
A: Yes, all CyanogenMod ROMs support this, so be free at scriptings
4. Can you include Samsung Apps/ ABCXYZ features here?
A: No! But, you can customize this ROM for your own. If you wanna release it public, give proper credits.
5. I can't connect to WiFi?
A: Use any root browser software, go to /data/misc/wifi, change "ctrl_interface" from wpa_supplicant.conf from "wlan0" to "/data/misc/wifi/sockets"
6. WiFi Direct in Settings is not working?
A: This feature is in beta-testing. You can use any 3rd-party software to use this feature.
7. What kernel is using in this ROM? Can i install any kernel on this ROM?
A: Mostly is stock kernel with sth modified to work with CM. You could use any kernel in this CM as you want, but don't send bug reports or confuses about bricked your device due to installing custom kernel. Read carefully first if you're going to install custom kernel. If your device is soft bricked, restore it with Odin or reinstall the ROM with factory reset.
8. Why i can't move apps to SD card?
A: Google and CM themselves removed the code of App2SD from framework mainline, so this feature is unavailable
9. Why i can't call to anyone, even you said that RIL is fixed?
A: You've to active SIMs first, by go to Settings >> SIM cards >> Configure SIM cards >> Touch active (ON/OFF switch) to active SIMs and use them as usual
10. Where's transparent status bar?
A: You have to enable developer options first, by go to Settings >> About phone >> 7-taps on build number >> Back to settings >> Performance >> Choose "Force high-end graphics" >> Reboot
11. Missing 480p quality on YouTube, tho stock still have it?
A: Look at build.prop, change Android version to 4.4.2 and reboot, feel the magic
Reserved
Installed on the SM-G360H and accomplish your goal!
First ever working CM ROM for Core Prime. Hail @doesntexits!!
pilot2507 said:
Installed on the SM-G360H and accomplish your goal!
Click to expand...
Click to collapse
AtomR said:
First ever working CM ROM for Core Prime. Hail @doesntexits!!
Click to expand...
Click to collapse
Thanks guys. Keep finding bugs for me, I'll try to fix it
This ROM has some performance issue. I'll do some fixes in kernel to fix that
Sent from my SM-G360H using XDA Labs
Eternal loading on my ..
Screenies updated. Check "Screenshots" tab
He flashed supersu, did advanced cache cleaning and for butanimatsiyu))
pilot2507 said:
He flashed supersu, did advanced cache cleaning and for butanimatsiyu))
Click to expand...
Click to collapse
Sorry, what?
Just do not know English.
generally set Vegito Kernel 2.5 kernel and reached the error Setup Wizard .
pilot2507 said:
Just do not know English.
generally set Vegito Kernel 2.5 kernel and reached the error Setup Wizard .
Click to expand...
Click to collapse
I still don't think, I understand you much. What I understand is that you had installed dreamstar's vegito kernel, now you're getting error while flashing this CM rom. Am I right?
As far as I know, you're not supposed to use custom kernel when flashing CM roms. So, I would suggest you to first install stock kernel, then flash the ROM.
Does this work on G360HU?
JustFrame said:
Does this work on G360HU?
Click to expand...
Click to collapse
You've to try it and tell us.
AFAIK, both have 100% same hardware.
JustFrame said:
Does this work on G360HU?
Click to expand...
Click to collapse
not
AtomR said:
You've to try it and tell us.
AFAIK, both have 100% same hardware.
Click to expand...
Click to collapse
Nice. The difference is the model name only. But I still got to test it.
AtomR said:
I still don't think, I understand you much. What I understand is that you had installed dreamstar's vegito kernel, now you're getting error while flashing this CM rom. Am I right?
As far as I know, you're not supposed to use custom kernel when flashing CM roms. So, I would suggest you to first install stock kernel, then flash the ROM.
Click to expand...
Click to collapse
I already put on everyone, and with the core and without core - operating system will not start!
pilot2507 said:
I already put on everyone, and with the core and without core - operating system will not start!
Click to expand...
Click to collapse
What do you mean exactly by, "with the core and without core"?
AtomR said:
I still don't think, I understand you much. What I understand is that you had installed dreamstar's vegito kernel, now you're getting error while flashing this CM rom. Am I right?
As far as I know, you're not supposed to use custom kernel when flashing CM roms. So, I would suggest you to first install stock kernel, then flash the ROM.
Click to expand...
Click to collapse
AtomR said:
What do you mean exactly by, "with the core and without core"?
Click to expand...
Click to collapse
native kernel loading eternal. with custom configuration wizard error
AtomR said:
What do you mean exactly by, "with the core and without core"?
Click to expand...
Click to collapse
He uses translate bro. It's hard to understand what he want to say
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working?
Screen
Wifi
Bluetooth
Camera (VGA mode)
Click to expand...
Click to collapse
Whats not working?
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod for the Galaxy Player 5, ROM for the Samsung Galaxy Player 4.0, 5.0
Contributors
iurnait, android1234567, JackpotClavin, Mevordel, zaclimon, Meticulus
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Need to be running 4.2 or above to install.
Version Information
Status: Stable
Stable Release Date: 2014-07-12
Created 2014-07-06
Last Updated 2014-10-12
Reserved
Notes:
Builds on/after Dec. 24 will have LVMv2 implemented (thanks to @Meticulus), where mmcblk0p13 (/system), mmcblk0p14 (/system/vendor), and mmcblk0p16 (/data) are placed in a logical volume group. This enables /system to be enlarged from 290MB to 600MB (or more as necessary later on). The packages that were removed from the first build (Apollo, File Manager, etc.) have all been re-added. Also, the removal of the vendor hack means that from now onwards, there is no need to reflash gapps after updating the rom.
-Installation Notes
--On the first flash, if the system logical volume is not present or
is less than 600M there is an assert error. This is so that if anyone
needs to backup information contained in /data, they can. In order to
proceed with the installation, the zip must be flashed a 2nd time.
--During the 2nd flash partitions in the logical group are wiped and
the logical volumes are created and formated then the /etc/fstab and
/etc/recovery.fstab are switched so that, when we hand everything off
to the normal rom installer, the new logical volumes are mounted.
-Reverting to a PRE-LVM ROM
--In the YP-G70 the "recovery", be it CWM or TWRP and in the kernel's
recovery-ramdisk. So in order to get a different recovery you just
flash a different kernel. So to get back to a PRE-LVM ROM, you just:
1. Reboot to recovery like normal.
2. Flash your PRE-LVM ROM like normal.
-- Note: All we really care about at this point is that the kernel
(boot.img) gets flashed. Ignore any other errors!
3. After the flash, Power off.
4. Hold volume up and power on, till you get to recovery.
5. Full wipe, including /system
Click to expand...
Click to collapse
Installation Instructions:
1. Reboot to recovery and make backup.
2. Do a full wipe.
3. Flash rom. You will see an error pop up. This is perfectly normal. Flash the rom again
4. Flash Gapps.
5. Flash US kernel if necessary
6. Have fun!
Update Instructions:
1. Reboot to recovery and make a backup
2. Wipe cache/dalvik cache
3. Flash rom
4. Flash US kernel if necessary.
5. Enjoy!
The links below are old downloads; please see the Downloads tab at the top for current release:
ROM: cm-11-20140517-UNOFFICIAL-venturi.zip - 175.13 MB
Gapps: Any will work, but I recommend PA's Mini Modular Package from http://forum.xda-developers.com/showthread.php?t=2397942.
Note: Builds now include a unified kernel, so there is no need to flash an additional kernel for any device
Click to expand...
Click to collapse
Previous builds
ROM: cm-11-20140414-UNOFFICIAL-venturi.zip - 170.86 MB
US Kernel: USA-Kernel-venturi-Apr-16.zip - 6.27 MB
Click to expand...
Click to collapse
ROM: cm-11-20140113-UNOFFICIAL-venturi.zip - 182.07 MB
US Kernel: cm11-USKernel-Jan12.zip - 5.80 MB
Click to expand...
Click to collapse
ROM: cm-11-20131224-UNOFFICIAL-venturi.zip - 176.60 MB
US Kernel: cm11-USKernel-Dec24.zip - 5.76 MB
Gapps: http://www.androidfilehost.com/?fid=23269279319196268
Notes: This includes the fixes made by Meticulus to the camera, so now the back facing camera takes pictures if you set it to VGA. Note that if you are updating from the previous build, there is no need to reflash gapps. However, US users still need to flash the US kernel after flashing this rom.
If you are coming from a build before Dec. 24, keep in mind that data will have to be wiped in order for lvm to be setup. The installer will give you a warning the first time you try flashing and then error out so that you can backup your data if you forgot, and then you can flash the zip again.
Notes:
LVMv2 Implemented, see above notes
Click to expand...
Click to collapse
Rom: cm-11-20131215-UNOFFICIAL-venturi.zip - 158.50 MB
US Kernel: cm11-USKernel-Dec15.zip - 5.29 MB
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/show....php?t=2012857
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Click to expand...
Click to collapse
reserved
iurnait, i buy a GNII and sale my P5.0 but i looking for jobs you a perfect dev and i think you work for NII can you make it?
Samsung GALAXY Note II (GT-N7100) cihazımdan Tapatalk 4 ile gönderildi.
Can't wait to try it out. Been awaiting this release since the Nexus 5 came out. Im so glad it finally came. THANKS ALOT for supporting such an old device.
Initial release:
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
4. Install US kernel if necessary
5. Install Gapps.
6. Reboot.
7. Profit
8. ???
Links
Rom: http://d-h.st/16c
US Kernel: http://d-h.st/ItN
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/showthread.php?t=2012857
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
dorfd1 said:
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
Click to expand...
Click to collapse
Well a solution we were looking into was increasing the size of the system partition during updating like the aries people have done
Lorddemonrage said:
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
Click to expand...
Click to collapse
What app are you using to edit build prop?
FweaKiid305 said:
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
iurnait said:
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
Click to expand...
Click to collapse
I Just Tried To Use It, It Said My Device Is Incompatible. It Seems I'm Stuck On This ROM.
Sent from my YP-G70 using xda app-developers app
This is awesome! Keep up the good work!
I'll probably put screenshots here too.
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Oh my... Flashing this immediately! Thank you!
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 10:51 PM ---------- Previous post was at 10:08 PM ----------
Testing now with art... You should also note in the op that this is a 4.4.2 build for selecting the correct banks gapps...
Sent from my Nexus 7 using Tapatalk 4
aznflawless said:
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
zaclimon said:
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
Click to expand...
Click to collapse
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
iurnait said:
What app are you using to edit build prop?
Click to expand...
Click to collapse
Rom Toolbox and the built in text editor, both no go. also unable to apply fonts from rom toolbox and can't delete bootanimation to replace with other bootanimation.
update 12/17: installed SuperSU and romtoolbox now works correctly, seems built in super user not working fully like in initial release of 4.3
Hot diggetty!
however, as I understand the paradigm, steps 7 and 8 are in the wrong order in the instruction list:
iurnait said:
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
...
Click to expand...
Click to collapse
annoyingduck said:
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes. I just did it. Transparent status bar works now!
Works nice for me, thank you for this
For Those who are getting errors (eg. status 7), just flash a 4.3 rom based before jumping from 4.2 to 4.4.
@iurnait
Have you ever heard about Viper4Android? Well, I really like that app, and is a must have for me, but the last rom where it works is CM 10.1 (4.2.2) and looks like that the problem can be fixed by the rom maintener, just have a look here
If is it possible to get Viper4Android works on KitKat in this device should be really nice for me
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
CM12 official nightly builds:
http://download.cyanogenmod.org/?device=d802
Gapps :
No official news
Working -
Everything
Bugs -
Errors in some applications
You tell me
First time installing CyanogenMod 12 to your LG G2 (D802), or coming from another ROM:
- Read the official wiki
- Copy GApps and CM12 ZIPs to your SDCard
- Boot into Recovery
- DO A DATA WIPE / FACTORY RESET
- Flash CM12 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
Upgrading from earlier version of CyanogenMod 12:
- Copy CM12 ZIP to your SDCard
- Boot into Recovery
- Flash CM12 zip from SDCard
- Reboot
IF REPORTING A BUG PLEASE REFER WHICH NIGHTLY VERSION YOU ARE RUNNING PLEASE
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
All Credits to CM Team. Please donate to them or press thanks. Please note I am not the G2's CM device maintainer.
Screenshot
Thank you!
Wich modem should we use? JB or KK?
Cheers
Zecanilis said:
Thank you!
Wich modem should we use? JB or KK?
Cheers
Click to expand...
Click to collapse
No need of installing any modem ..
Everything works fine with the stock modem
Sent from my LG-D802 using XDA Free mobile app
Hello i have a problem.
I am on 4.4.2 and i install TWRP 2.8.3.1 http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and when i try to install CM 12 come up error "assert failed: run_program ('/system/bin/loki.sh"
What can i do any solution?
Can I use it on VS980 by flashing Render Kernel after flashing rom.? Thanks.
digkong said:
CM11 official nightly builds:
http://download.cyanogenmod.org/?device=d802
Click to expand...
Click to collapse
A little typo
waleedshiekh said:
Can I use it on VS980 by flashing Render Kernel after flashing rom.? Thanks.
Click to expand...
Click to collapse
No, still no CM12 for VS980
JulianAssange said:
Hello i have a problem.
I am on 4.4.2 and i install TWRP 2.8.3.1 http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and when i try to install CM 12 come up error "assert failed: run_program ('/system/bin/loki.sh"
What can i do any solution?
Click to expand...
Click to collapse
I think the least version don't are lokified only bumped, try with older versions.
I fix the problem i go back to 4.2.2 and then flash rom and gapps and i have no problem.
Rom is super fast and i have no problem at all.
Actually it's 5.0.1
http://www.cyanogenmod.org/blog/the-l-is-for-lollipop
Weeeee!! Thank you
Mokson said:
Actually it's 5.0.1
http://www.cyanogenmod.org/blog/the-l-is-for-lollipop
Click to expand...
Click to collapse
I just flashed it. It's 5.0.2.
on a side note.. Render kernel works great on it!
Can i update from cm11 to cm12 without full wipe?
SunamY said:
Can i update from cm11 to cm12 without full wipe?
Click to expand...
Click to collapse
Maby but if u get bootloops ore random error don't blame the dev.
I tried dirty flashing from crDroid 5.0.2 and no sensors worked gps/compas/light/proximity so I whould do a full wipe.
You can go to cm12 nightly, without wipe. You have to do something first, before that.
Copy, paste:
1.This is an Android 5.0.1 Lollipop-based release - update your third party addons to ensure compatibility
2.The CM backupscript.sh in recovery will ignore and remove incompatible applications from your system partition (these are usually non-CM apps that users have opted to install). You must install a compatible app (or app pack) to regain that functionality
3.You can flash CM12 nightlies directly from CM11 M12 or CM 11 nightlies (no need to wipe), provided you read and followed items 1 and 2
4.Once on CM12 nightlies, you cannot downgrade back to CM11 without wiping – if you are thinking of just exploring the release, then take a backup of your existing installation if you want to go back to it.
5.You’ll need an L compatible recovery
What features does this run in particular have?
Since screen recording was native in kit kat will we see the same for lollipop?
Thanks for your work. You're awesome!
Where can I find the Gapps of CM12??
http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Only thin I miss is screanrecorder and to edit navbar. Miss my menu button and what my back button to the right. And maby network speed monitor in status bar..
But this is :MOD EDIT: awsome. My phone has never been this fast. Both in 3d and 2d apps
Wifi drop when enabling Bluetooth, otherwise everything seem ok
Skickat från min GT-I9300 via Tapatalk
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device..
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github Repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Device-specific source code for the Samsung Galaxy Mega 5.8 are available from
https://github.com/ghsr/android_device_samsung_i9152 and
https://github.com/ghsr/android_kernel_samsung_i9152
Patches:
Thanks to @pawitp and his following patches: https://gist.github.com/pawitp/cba169c87dba57eea8ef
Do not submit bug on CyanogenMod issue tracker
Downloads
ROM : Google Drive or WebDav
GApps : PA GApps or WebDav - GApps 5.1
WebDav the login/password 9152
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
GPS
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera (photo)
Video playback
Audio (playback & recording)
Everything else not listed under "known issues"
Known Issues
"Receive incoming call while data is enabled" is always enabled
Installation Instructions
Make a backup!
Install a custom recovery with SELinux support
Download the latest build
Wipe data if coming from stock or another ROM (You may get a "staus 7" error if you fail to wipe.)
Flash ROM using your custom recovery
Flash Gapps
Reboot
Enjoy!
Update Instructions
Make a backup!
Download the latest build
Flash ROM using your custom recovery
Flash Gapps
Wipe cache
Wipe dalvik cache
Reboot
Enjoy!
Changelog
20150410: Updated to Android 5.1
20150510: Updated to Android 5.1.1, Enabled performance profiles, Implement display color calibration, Fixed screen pinning, Encryption on f2fs, Lags when using LiveDisplay, Unable to change SIM name, Having multiple STK icons, Fixed simultaneous regulation of the volume of the ringtone and notifications, Upstream merge.
20150530: Upstream merge, Android updated to 5.1.1_r3
20150614: Upstream merge, Integrated SuperSU
20150718: Upstream merge
20150823: Upstream merge
20150905: Upstream merge
20151024: Upstream merge, Android updated to 5.1.1_r24, Preinstalled KernelAdiutor
20151202: Upstream merge, Fix bootanimaton KernelAdiutor last version
FAQ
F2FS
This Rom supports f2fs since the latest build. Don't ask me, what it is. Just google it.
Instructions for f2fs:
Download the modified twrp recovery for f2fs based from here and flash it
Save your data, your whole internal storage will be formatted soon.
Put the latest rom build and gapps on your EXTERNAL sdcard
Format data and cache to f2fs using twrp recovery
Flash the rom and gapps
DO NOT FLASH A KERNEL, WHICH DOES NOT SUPPORT F2FS
If you want to revert back to the usual ext4 partitions, format data and cache with twrp recovery to ext4.
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your--
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Dual SIM:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Credits
CyanogenMod team
@pawitp
@xenon92
@LuK1337
@andixlm
@KINGbabasula
@CoolDevelopment
@GHsR
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy Mega 5.8
Contributors
GHsR, Superdiv
Source Code: https://github.com/CyanogenMod
ROM OS Version: 5.1 Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Created 12-04-2015
Last Updated 02-12-2015
So what's the difference between this version and GHsR's version? Or are they just different build on the same codebase?
Can I just flash this without wiping old data from GHsR's build?
Sent from my GT-I9152, running CM 12 ported by GHsR, using XDA Free mobile app
Is that belong to GHsR's builds ?!
m13253 said:
So what's the difference between this version and GHsR's version? Or are they just different build on the same codebase?
Click to expand...
Click to collapse
There is no difference, just now assembled and I spread.
m13253 said:
Can I just flash this without wiping old data from GHsR's build?
Click to expand...
Click to collapse
No wipes needed because of the transition to Android 5.1
aswe77 said:
Is that belong to GHsR's builds ?!
Click to expand...
Click to collapse
It's not my builds. Now cm-12.1 will compile @Kiborg_Man, it will use device tree and kernel from my github.
m13253 said:
Can I just flash this without wiping old data from GHsR's build?
Click to expand...
Click to collapse
need full wipes
Move the thread to android development ..
And happy to see a new devloper .. Nice work sir ??
Sent from my GT-I9152 using XDA Free mobile app
Hi All
Have you idea, if soon cyanogenmod 12 or 12.1 for my Galaxy Mega i9205 ?
Thanks for your response.
Cordially
jojox1 said:
cyanogenmod 12 or 12.1 for my Galaxy Mega i9205 ?
Click to expand...
Click to collapse
For Your device, there is the CyanogenMod 12 but posted on another forum, now throw in a personal reference.
Kiborg_Man said:
For Your device, there is the CyanogenMod 12 but posted on another forum, now throw in a personal reference.
Click to expand...
Click to collapse
Could yoy share info about Cm12 for GT-I9205?
jojox1 said:
http://4pda.ru/forum/index.php?showtopic=537532&st=400#entry31878760
This is the link i have receive.
Click to expand...
Click to collapse
Lots of thanks,
its working fine
How to root this Lollop 5.1 cyanogen 12.1
jayesp0411 said:
Lots of thanks,
its working fine
How to root this Lollop 5.1 cyanogen 12.1
Click to expand...
Click to collapse
CyanogenMod comes with a built-in root. Head to "Developer Options" to find the switch.
Sent from my GT-I9152, running CM 12.1 ported by GHsR & Kiborg_Man, using XDA Free mobile app
HI!
This ROM is compatible with APP2SD ?
_Iron said:
HI!
This ROM is compatible with APP2SD ?
Click to expand...
Click to collapse
Yes
Considerations
Congratulations is working fine!
For now only noticed that notification tones and ring can not be adjusted separately, even with the selected option.
But I realized that many of the bugs in CM12 have been fixed.
Thanks for the work!
App to external sd
Hi.
There is already a way to install applications data in the external SD card?
_Iron said:
Hi.
There is already a way to install applications data in the external SD card?
Click to expand...
Click to collapse
No, for data transfer applications, use a third-party program.
Kiborg_Man said:
No, for data transfer applications, use a third-party program.
Click to expand...
Click to collapse
Can you give me a hint of a good app for that?
_Iron said:
Can you give me a hint of a good app for that?
Click to expand...
Click to collapse
Sorry, no.
_Iron said:
Can you give me a hint of a good app for that?
Click to expand...
Click to collapse
You can try Link2SD. Although I have not tried it yet.
P.S. You'd better make a backup just in case Link2SD does not work on this ROM.
m13253 said:
You can try Link2SD. Although I have not tried it yet.
P.S. You'd better make a backup just in case Link2SD does not work on this ROM.
Click to expand...
Click to collapse
I was just researching more about this application. But users who used seem to be satisfied. I'll check during the weekend and post here my result.
NOTE: THERE'S A NEW THREAD HAS BEEN MADE. ANY UPDATES FROM THIS THREAD WILL BE MOVED TO THE NEW THREAD. THIS THREAD IS NOW CLOSED!!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 (MM), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
RIL (Calls, SMS, Mobile data) [Dual-SIM]
Wifi (connection, tethering, etc)
Bluetooth
Camera, video codecs
Storage (both internal and external)
Storages (internal, external, adoptable storage) (*)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Torch (flashlight)
WiFi-Direct
SELinux enforcing
New lz4 compressor/de-compressor for zram (new)
BUGS/Not working :
There're lots of bugs, but main are
No sound (beware making alarm while running this ROM), also Sound Recording doesn't work
Sound quality not too good when playing loud music or sound
FM radio app FC (due to missing libraries)
Screen recorder freeze the system (due to codecs, maybe)
Screen flickering on apps only (known as "strict mode"). Quick solution is pressing recents button, then return to the app. Currently, we can't disable it through Developer options
Distorting sound when using Bluetooth headset in call
WiFi-Direct does not work
WiFi auto-disconnect
AudioFX is not working
Battery drain caused by RIL
Cannot switch mobile data to other SIM without reboot
First time installing CyanogenMod 13 to your Galaxy V, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, be kind and give proper credits
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-source doesn't mean "out of respect"
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
BETA-1: Link
BETA-1Update1: XDA MF
BETA-2: XDA MF
BETA-3:
ROM XDA MF
BOOT.IMG XDA MF
BETA-4: Mirror MF
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Ace 4
Contributors
doesntexits, ngoquang2708
Source Code: https://github.com/ngoquang2708/android_device_samsung_vivalto3gvn/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.2
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 3
Beta Release Date: 2016-08-01
Created 2016-06-14
Last Updated 2016-08-28
CHANGELOG
ALPHA-1
Initial release
BETA-1
Fixed RIL, switched to beta builds
Switched to AOSP charging module
Fixed screen flickering
Fixed audio (thanks to @ngoquang2708)
BETA-2
Fixed screen flickering.
Fixed audio, now you can maximize your volume!
BETA-3
Fixed AudioFX
Fixed WiFi auto-disconnect
Working WiFi-Direct
No more "lock" at Setup Wizard
SELinux is now in Enforcing mode
BETA-4: Post #199
F.A.Q
Q: ROM startup too slow?
A: This device is just a single-core phone, so the first startup is super-duper slow, and some lags are expected during usage
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G313ML, SM-G313H
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can i use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Status 7 when installing the ROM?
A: Use TWRP recovery to install the ROM, as CWM is not supported yet
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
@adriansticoid
Your guessing is right. Here's our surprise
doesntexits said:
@adriansticoid
Your guessing is right. Here's our surprise
Click to expand...
Click to collapse
Thank you so much for this! Much appreciated. But I see that it is not suitable yet for daily use. Gonna wait until the camera and RIL bigs are fixed then I'll immediately switch to this.
Sent from my SM-T110 using XDA Labs
adriansticoid said:
Thank you so much for this! Much appreciated. But I see that it is not suitable yet for daily use. Gonna wait until the camera and RIL bigs are fixed then I'll immediately switch to this.
Sent from my SM-T110 using XDA Labs
Click to expand...
Click to collapse
Actually, the camera is usable, but sometimes during capture only, it lags (just for minimal duration, count by miliseconds). Video recording works just fine, but no sound
When RIL is fixed, we'll switch the ROM to beta builds, as it's a major issue for now
doesntexits said:
Actually, the camera is usable, but sometimes during capture only, it lags (just for minimal duration, count by miliseconds). Video recording works just fine, but no sound
When RIL is fixed, we'll switch the ROM to beta builds, as it's a major issue for now
Click to expand...
Click to collapse
Oh yeah one more thing. That sound bug. That one along with the RIL bug are the majors for now. Really man if you are just near I'll invite you to my house to have some snacks here. I hope hose are fixed soon.
Sent from my SM-T110 using XDA Labs
adriansticoid said:
Oh yeah one more thing. That sound bug. That one along with the RIL bug are the majors for now. Really man if you are just near I'll invite you to my house to have some snacks here. I hope hose are fixed soon.
Sent from my SM-T110 using XDA Labs
Click to expand...
Click to collapse
OK thanks, but I want my money back, as I've lost all of them to buy a new phone due to a funny reason: Don't know where I've kept them
Also because of that, I've a reason to have more time developing for Galaxy V, else I would doing for both phones
doesntexits said:
OK thanks, but I want my money back, as I've lost all of them to buy a new phone due to a funny reason: Don't know where I've kept them
Also because of that, I've a reason to have more time developing for Galaxy V, else I would doing for both phones
Click to expand...
Click to collapse
If only I can spare some, but I am only a student. Haha.
Sent from my SM-T110 using XDA Labs
Guys, I found our old running apps menu
It was in Developer options >> Running services
cmn guys, make this for sm-g313hu
gsrq said:
cmn guys, make this for sm-g313hu
Click to expand...
Click to collapse
Sorry, we don't have it
Btw, you've CM12.1 already right? Just use it
Fun fact: 6 months ago, I was acting like you too
This is great but, cm12 is still better for now Im excited for the final release. Im still waiting for your cm11 3rd final release.
Mc Code said:
This is great but, cm12 is still better for now Im excited for the final release. Im still waiting for your cm11 3rd final release.
Click to expand...
Click to collapse
Don't wait for that release. It's EOL (end-of-life) now
doesntexits said:
Don't wait for that release. It's EOL (end-of-life) now
Click to expand...
Click to collapse
What does that actually mean?
Sent from my SM-T110 using XDA Labs
adriansticoid said:
What does that actually mean?
Sent from my SM-T110 using XDA Labs
Click to expand...
Click to collapse
It means CM11 won't be having future builds anymore
doesntexits said:
It means CM11 won't be having future builds anymore
Click to expand...
Click to collapse
I see. CM11 is pretty stable now. CM13 should be more focused on.
Sent from my SM-T110 using XDA Labs
Great news guys! We have been working hard, and.... RIL now fixed!
We can make calls, send SMS, using mobile data for sure. Although that, we still having a great trouble: SystemUI and Phone FC
When that problem is fixed, we'll release BETA-1 for sure
Fun fact: Audio is dead, but we can still hear what people are saying in calls
I am confuse, that how can you upgrade your kernel.
Your device Kernel version was 3.10.17 and now its upgraded to 3.10.34
How is that possible.
I planned to port this ROM to higgs2g if the CM13 build process always fails.. Can I have permission to port this ROM? Thanks in advance
Sent from my higgs2g using XDA Labs
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
DOWNLOADS:
Click to expand...
Click to collapse
ROM: Link
Quick patches: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar
Source Code: https://github.com/koquantam/android_device_samsung_core33g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
Created 2016-06-25
Last Updated 2016-07-14
Yehey! Hahaha.
Great job @doesntexits, great to see all major things are working! (Are they really working RIL, WiFi? If yes, wow) Suitable for daily use. Thanks!
Edit: I'm running out of 'Thanks' today. So, I'll give this thread a 'thanks' tomorrow. Haha.
Updale the title bro. Put the Model Number.
AtomR said:
Great job @doesntexits, great to see all major things are working! (Are they really working RIL, WiFi? If yes, wow) Suitable for daily use. Thanks!
Edit: I'm running out of 'Thanks' today. So, I'll give this thread a 'thanks' tomorrow. Haha.
Click to expand...
Click to collapse
See screenies for more
Only One Bug That would be great
doesntexits said:
See screenies for more
Click to expand...
Click to collapse
Just saw them! This is gonna be daily driver on my phone. BTW, is there any possibility for that font-related bug to be fixed? I see it's there in GV CM12.1 since ages.
AtomR said:
Just saw them! This is gonna be daily driver on my phone. BTW, is there any possibility for that font-related bug to be fixed? I see it's there in GV CM12.1 since ages.
Click to expand...
Click to collapse
This is CM's fault itself, but this thingy is fixed in CM13, so be wait for CM13 going stable
Dreamstar said:
Only One Bug That would be great
Click to expand...
Click to collapse
Yeah, that sh!tty bug
doesntexits said:
This is CM's fault itself, but this thingy is fixed in CM13, so be wait for CM13 going stable
Click to expand...
Click to collapse
Ahh. Ok. Well, I can surely live without changing fonts.
Title has been changed. And you also put G360HU @doesntexits.
JustFrame said:
Title has been changed. And you also put G360HU @doesntexits.
Click to expand...
Click to collapse
Also removed quotes in my signature too due to characters exceeds limits
if i in stock rom with rooted
and my kernal not updated to latest
can i flash this ??
and which recovery ?
thnks in advance
---------- Post added at 05:38 PM ---------- Previous post was at 05:31 PM ----------
please reply...am waiting for your reply
i hve CWM recovery
Thanks a lot. @doesntexits @Dreamstar
@AtomR
You promised me not ditching this phone right? So just keep up with it. There will be more fun with this phone
And I've made surprises to people by releasing 2 ROMs in a day, with upgraded version of Android
Sent from my SM-G360H using XDA Labs
For Gaps what should I choose? ARM, ARM64 etc??
wowwwwww suprb work dude......so nice so smooth thnks bro
I found another bug: Video recording doesn't work
Probably codecs thingy here
Sent from my SM-G360H using XDA Labs
Boy, i love you! Thank you!
choose ARM instead of ARM64