CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 (MM), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Audio
RIL (Calls, SMS, Mobile data) [Dual-SIM]
Wifi (connection, tethering, etc)
Bluetooth (need patches in download links)
Camera, video codecs
Storage (both internal and external)
Storages (internal, external, adoptable storage) (*)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Torch (flashlight)
BUGS/Not working :
Using single SIM get no signals. To fix this, remove "persist.radio.multisim.config=dsds" from build.prop. If you need dual SIM, add it again
FM radio app doesn't work (can be opened only)
Slow 3G speed
First time installing CyanogenMod 13 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
Multitasking test video
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
BETA-1: Link
BETA-2: Link
BETA-3: Link
BETA-4: Link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar, HASH, ngoquang2708
Source Code: https://github.com/koquantam/android_device_samsung_core33g/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 4
Beta Release Date: 2016-08-28
Created 2016-06-28
Last Updated 2017-11-17
CHANGELOG
ALPHA-1
Initial release
BETA-1
Fixed bluetooth and audio (included in patches)
Fixed screen flickering (thanks to @ngoquang2708)
Switched to jemalloc() memory allocator, optimized for multi-core processor
BETA-2
Added multi-user UI (find in Settings)
Fully fixed HW codecs, recorded videos no longer lags, also front cam recording has correct color
Added RIL props in build.prop
BETA-3
Fully fixed audio (thanks to @ngoquang2708)
Temporary disabled TRIM function in fstab (to prevent future problems)
Fixed STK hangs
BETA-4: Post #647
F.A.Q
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: Dead touchscreen?
A: Wrong installation method leads to this problem. Before restoring to stock through Odin, go to recovery mode (TWRP highly recommended), wipe everything in the Wipe section >> Advanced wipe (tick all system, data, cache, but not other storages, no need wiping dalvik/ART cache, as it already done by wiping data), then go to Download mode, restore stock, install custom recovery again and then, install the ROM you want
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G360HU
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: My phone is slow as snail after installing ROM. I've tried restoring stock and do formattings but no help?
A: I have answered this question. See this post: Link
Good job, bro. Thanks.
I'll surely test this one, when I'll be free.
I'll wait until the bugs fixed.Then I installed it.?
Deym fast.
wow thanx man
waiting for stable version
Audio patches added to OP
doesntexits said:
Audio patches added to OP
Click to expand...
Click to collapse
Bro, you're so fast at fixing bugs. :good:
@doesntexits
Bad working video record in standard gallery.
JustFrame said:
Bro, you're so fast at fixing bugs. :good:
Click to expand...
Click to collapse
Well, look at the OP, not me fixing audio bug
demchenko said:
@doesntexits
Bad working video record in standard gallery.
Click to expand...
Click to collapse
Stock has that too
doesntexits said:
Well, look at the OP, not me fixing audio bug
Click to expand...
Click to collapse
But bro, Please fix ASAP the screen flickering because it annoyed me.
Bro i cant install the patches. It says "Could not find 'META-INF/com/google/android blah-blah-blah
how we can change from cm12.1 to cm13 without losing any data?
or flash kitkat touchwiz first then go to cm13?
JustFrame said:
But bro, Please fix ASAP the screen flickering because it annoyed me.
Bro i cant install the patches. It says "Could not find 'META-INF/com/google/android blah-blah-blah
Click to expand...
Click to collapse
Link edited
wtf! Can not imagine. So fast. Looks like @doesntexits is entering too fast in CM13, never exits. LOL!
Wishi123 said:
Playstore not working haha.
Click to expand...
Click to collapse
Same here sometimes
Sent from my SM-G360H using XDA Labs
wow amazing you are sooo fast....i install this when it is stable and bugs free.......you are amazing bro #doesntexits
Hi, works on G360M? Thanks
Camera not work.
Sent from my SM-G360H with cm13 using*XDA-Developers mobile app
poriya.219 said:
Camera not work.View attachment 3797504
Sent from my SM-G360H with cm13 using*XDA-Developers mobile app
Click to expand...
Click to collapse
Unlock your screen first, then reopen camera app
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device..
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github Repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Device-specific source code:
Device tree: https://github.com/ghsr/android_device_samsung_i9152
Kernel source: https://github.com/ghsr/android_kernel_samsung_i9152
Compatibilitiy Patches: https://github.com/ghsr/build_tools/tree/cm-13.0/patches
WebView: https://github.com/pawitp/android_external_chromium-webview
Downloads
ROM: Google Drive and WebDav - login/password 9152
Gapps: http://opengapps.org
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera
Video (playback & recording)
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Known Issues
Runtime storage permission does not work properly (setns patches are not applied, see PermissionsHostTest CTS test)
Additionally, Dual SIM has the following limitations (once they work):
Both SIMs are always enabled (no way to disable one SIM)
"Receive incoming call while data is enabled" is always enabled
Installation Instructions
Make a backup!
Install a custom recovery with SELinux support
Download the latest build
Wipe data/factory reset if coming from stock or another ROM (You may get a "staus 7" error if you fail to wipe.)
Flash the ROM and then GApps
Reboot your phone
Enjoy!
To upgrade to a newer build, simply flash the zip. There's no need for data wipe or flashing Google Apps again. (However, if you are experiencing strange issues, you may want to try a wipe.)
Changelog
Code:
20161118: Upstream merge, Updated Kernel Adiutor to version 0.9.4.4.2, Updated SuperSU 2.79
20161214: Upstream merge, Updated Kernel Adiutor to version 0.9.4.2
20161118: Upstream merge, Updated Kernel Adiutor to version 0.9.4
20161014: Upstream merge
20160903: Upstream merge, Updated SuperSU 2.78, Updated Kernel Adiutor to version 0.9.30.2
20160807: Upstream merge, Added OTA update, Updated Kernel Adiutor to version 0.9.27.1
20160711: Upstream merge, Updated SuperSU to version 2.76, Integrated Yahoo Weather Provider
20160604: Upstream merge
20160508: Fixed youtube issue (stopping video playback after 5-7 seconds), Enabled gesture typing and fixed LatinIME fc, Fixed unstable usb connection, Fixed runtime storage permission (applied setns patches in the kernel), Enabled auto power modes, Added some encryption fixes, Upstream merge, Update to Android 6.0.1_r43
20160424: Upstream merge, Update to Android 6.0.1_r30
20160321: Upstream merge, Update SuperSU 2.65
20160314: Upstream merge, Update to Android 6.0.1_r22
20160227: Upstream merge, Fixed writing of files Recorder to the SD card, Integrated SuperSU, Updated KernelAuditor
20160211: Upstream merge
20160202: Upstream merge
20160120: Initial release
FAQ
F2FS
This Rom supports f2fs since the latest build. Don't ask me, what it is. Just google it.
Instructions for f2fs:
Download the modified twrp recovery for f2fs based from here and flash it
Save your data, your whole internal storage will be formatted soon.
Put the latest rom build and gapps on your EXTERNAL sdcard
Format data and cache to f2fs using twrp recovery
Flash the rom and gapps
DO NOT FLASH A KERNEL, WHICH DOES NOT SUPPORT F2FS
If you want to revert back to the usual ext4 partitions, format data and cache with twrp recovery to ext4.
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your--
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Dual SIM:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Credits
CyanogenMod team
@pawitp
@xenon92
@LuK1337
@andixlm
@KINGbabasula
@CoolDevelopment
@GHsR
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Mega 5.8
Contributors
GHsR, Superdiv
Source Code: https://github.com/cyanogenmod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Version Information
Status: Stabile
Created 20-01-2016
Last Updated 30-12-2016
First one
Will try and report
hello Kiborg_Man you ever experienced any problems after you use?
@Kiborg_Man Been over 2o mins. Still on bootanimation.
edit: looks like Supersu v2.5.2 OR Xposed was causing the issue.
Super smooth no issues clean build thanks for the build.
Thanks for the ROM....
_Iron said:
hello Kiborg_Man you ever experienced any problems after you use?
Click to expand...
Click to collapse
No
daneal2u said:
@Kiborg_Man Been over 2o mins. Still on bootanimation.
edit: looks like Supersu v2.5.2 OR Xposed was causing the issue.
Click to expand...
Click to collapse
Use SuperSU 2.66
He gave bad for me!
Once you take more than two hours of installation, did not recognize my SIM cards and has also stopped for all google applications. The most common was Google Play Services stoped ... Very sad !!!
_Iron said:
He gave bad for me!
Once you take more than two hours of installation, did not recognize my SIM cards and has also stopped for all google applications. The most common was Google Play Services stoped ... Very sad !!!
Click to expand...
Click to collapse
Clean install it dont wipe system . wipe data dalvik and cache. Dont flash supersu . flash open gapps nano
hardik190 said:
Clean install it dont wipe system . wipe data dalvik and cache. Dont flash supersu . flash open gapps nano
Click to expand...
Click to collapse
ok today I will do it this way... Thank you!
Hello guys...
I tried in several ways:
- As the Kboing;
- As the hardik190;
- I also tried a simple upgrade without the Data Wipe only with Wipe System / Cache;
- I tried like doing a clean installation;
- I tried installing the CM12.1 package with Gapps and later with the CM13 Zip only.
The results were always negative:
- Problems related to Google services;
- Problems with the recognition of SIM cards;
- And the last time with the Infinity Loop.
Really appreciate the help and commitment of friends in trying to help, but unfortunately I will keep me in CM12.1 until later builds.
Congratulations to Kiborg throughout dedication to upgrade a device so little known and with few partners to share experiences.
That's it folks!
@_Iron GApps need to be installed prior to the first ROM, put SuperSU if you need a version 2.66
P.S. MD5: a398f03d9fb75804fbf078cf5d297b6d *cm-13.0-20160120-UNOFFICIAL-i9152.zip
_Iron said:
Hello guys...
I tried in several ways:
- As the Kboing;
- As the hardik190;
- I also tried a simple upgrade without the Data Wipe only with Wipe System / Cache;
- I tried like doing a clean installation;
- I tried installing the CM12.1 package with Gapps and later with the CM13 Zip only.
The results were always negative:
- Problems related to Google services;
- Problems with the recognition of SIM cards;
- And the last time with the Infinity Loop.
Really appreciate the help and commitment of friends in trying to help, but unfortunately I will keep me in CM12.1 until later builds.
Congratulations to Kiborg throughout dedication to upgrade a device so little known and with few partners to share experiences.
That's it folks!
Click to expand...
Click to collapse
Flash cm 12 with gaops 5.1 let boot it then wipe data dalvik cache and cache . then install cm 13 then open gapps 6.0 nano or pico dont flash supersu ywt let it boot
@Kiborg_Man thanks
bug:my phone is not able to go to deep sleep. Wifi remains on even when is witch it off. And yes all options in location>3dot menu r off (Bluetooth and wifi scanning) don't know what to do. Wake locks are caused by cyanogenmod system.
Hope u look into the problem.
I'll provide screenshots l8r
hardik190 said:
Flash cm 12 with gaops 5.1 let boot it then wipe data dalvik cache and cache . then install cm 13 then open gapps 6.0 nano or pico dont flash supersu ywt let it boot
Click to expand...
Click to collapse
Let's see if understand:
- Should I install the CM12.1, Gapps 5.1, but should not activate the SUPERSU.
- Afterward WIPE DATA, WIPE CACHE Davik, WIPE CACHE.
- Install CM13 and Gapps 6.0-leave boot
My doubt is regarding the SUPERSU, I only installed it when the ROM shows me a message box saying that will update the SuperSU #.
You must install it by recovery mode?
Thanks for the attention of everyone there
_Iron said:
Let's see if understand:
- Should I install the CM12.1, Gapps 5.1, but should not activate the SUPERSU.
- WIPE DATA, WIPE CACHE Davik, WIPE CACHE.
- Install CM13 and Gapps 6.0-leave boot
Click to expand...
Click to collapse
Specially to install CM12.1 is not necessary, the following points need.
Install SuperSU version only 2.66 or 2.67 through recovery.
One more question...
In this version NETFLIX is OK?
in CM12 :bad:
Hello guys..
I have installed this ROM with 6.0 stock GAPPS for 3 days.
Issues that I know so far:
- Google camera always stop working for using other than camera( video, panorama, photo sphere )
-random freezes, that I need to pull out the battery
-sometimes phone restart itself after clearing apps from the overview(recent apps switcher)
Other than that issues, this ROM run smooth.
Thank you for the work :good:
Hmm... When I flash SuperSU 2.66 it boot loops.
pascalis said:
Hello guys..
I have installed this ROM with 6.0 stock GAPPS for 3 days.
Issues that I know so far:
- Google camera always stop working for using other than camera( video, panorama, photo sphere )
-random freezes, that I need to pull out the battery
-sometimes phone restart itself after clearing apps from the overview(recent apps switcher)
Other than that issues, this ROM run smooth.
Thank you for the work :good:
Click to expand...
Click to collapse
Youtube video connection problem at 0:05 every video
---------- Post added at 09:59 AM ---------- Previous post was at 09:57 AM ----------
Crowbar_Asdfghjkl said:
Hmm... When I flash SuperSU 2.66 it boot loops.
Click to expand...
Click to collapse
Without supersu the room has root aceess no problems for root permission . enable root access from devloper option and give apps and adb thats it
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 (MM), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Audio
RIL (Calls, SMS, Mobile data) [Dual-SIM]
Wifi (connection, tethering, etc)
Bluetooth (need patches in download links)
Camera
Video codecs
Storage (both internal and external)
Storages (internal, external, adoptable storage) (*)
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
Torch (flashlight)
GPS
BUGS/Not working :
Abnormal graphics glitches (which causes flashing pixels sometimes)
Recorded videos through camera produces wrong color
Offline charging doesn't work
Wifi sometimes disconnect. Workaround: Enable "Use legacy DHCP client" in developer options
Tell me more....
First time installing CyanogenMod 13 to your Galaxy Core Prime VE, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
Boot.img (flash after flashing ALPHA-1): Link
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar
Source Code: https://github.com/koquantam/android_device_samsung_coreprimeve3g
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 5.1.1
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-10-29
Last Updated 2016-11-04
CHANGELOG
ALPHA-1: Initial release
F.A.Q
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: Nope
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Reserved for future usage
@doesntexits
u came with new post. if u have little bit time, plz focus cm13 (g360h) rom. thanks.
bootloop!!! In your post on 4pda you mentioned to flash boot.img after flashing rom, can i get it's link?
I have added boot.img link in OP. Please download it and flash it after flashing ALPHA-1, else ROM doesn't boot
screen cast Your android version is not supported yet
Any updates about the rom?
anyone got a fix for RIL crashes?
anyone got a fix for RIL crashes?
Any updates about the rom?
Please fix this two bugs.Abnormal graphics glitches (which causes flashing pixels sometimes).
Recorded videos through camera produces wrong color.
shah muhammad said:
Please fix this two bugs.Abnormal graphics glitches (which causes flashing pixels sometimes).
Recorded videos through camera produces wrong color.
Click to expand...
Click to collapse
The big problem is RIL crashes
you can use another camera app to record without wrong color
:fingers-crossed:
I used google camera app but this bug is not fixed.
Is there any updates of this rom with fixed bugs?
shah muhammad said:
Is there any updates of this rom with fixed bugs?
Click to expand...
Click to collapse
Nope.
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
shah muhammad said:
I used google camera app but this bug is not fixed.
Click to expand...
Click to collapse
Use another camera app that doesnt use the phone's codecs.
use footej camera or viva video pro to record without wrong color
Can i use open camera if not please say who app fix this bug? Can i fix abnormal graphics?
shah muhammad said:
Can i use open camera if not please say who app fix this bug? Can i fix abnormal graphics?
Click to expand...
Click to collapse
This is a beautiful Rom But it contains a lot of big problems
you can flash LineageOS is better
Lineage is a free, community built, aftermarket firmware distribution of Android 7.1.1 (N), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Everything except in BUGS/Not working list
BUGS/Not working :
Offline charging doesn't work
STK hangs after choosing a subscription in the menu
Front camera displays 0,3MP instead of 2MP
First time installing LineageOS 14.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
NOTE: First boot might take long time, due to deodexed build, so don't consider bootloop!!
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DOWNLOADS:
Click to expand...
Click to collapse
BETA-4: Drive link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy Core Prime
Contributors
remilia15
Source Code: https://github.com/remilia15/android_device_samsung_core33g/tree/cm-14.1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.4
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 3
Beta Release Date: 2017-04-08
Created 2017-04-08
Last Updated 2018-06-15
CHANGELOG
BETA-1:
Initial LineageOS 14.1 release
BETA-2: Post #25
BETA-3: Post #230
BETA-4: Post #365
Frequently Asked Questions
Taken originally from @doesntexits
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: Dead touchscreen?
A: Wrong installation method leads to this problem. Before restoring to stock through Odin, go to recovery mode (TWRP highly recommended), wipe everything in the Wipe section >> Advanced wipe (tick all system, data, cache, but not other storages, no need wiping dalvik/ART cache, as it already done by wiping data), then go to Download mode, restore stock, install custom recovery again and then, install the ROM you want
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G360HU
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you can
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow, and now it's Nougat
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in this ROM? I don't see it in Storage settings
A: This feature has been moved to Developer settings since Marshmallow, and will reset to default (Charging) after everytime you unplug your USB (due to security reasons). Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging" or "USB is connected"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: My phone is slow as snail after installing ROM. I've tried restoring stock and do formattings but no help?
A: I have answered this question. See this post: Link
Thanks @remilia15
Thread bookmarked
Thanks
Awesome @remilia15 thanks
WOW we have got a LOS 14.1
you are awesome
Finally N for our device. Yay. Thanks OP
Fix for home button not working
So I managed to fix the home button not working bug.
Extract the contents of the attached zip file into your /system/usr/keylayout and change the permissions of each file to 644 if they are not 644 already. Then a reboot should fix the problem.
Now searching for quick fix of camera.
For older releases, use patch below by [email protected] for those bug fixes.
Or flash newer release like Beta-2.
Any custom kernel works?
FIX for bugs
listed things are fixed
camera [photo&video]
Flac audio codec
home button
volume [increased]
flash the zip and do a factory reset
DOWNLOAD
[email protected] said:
listed things are fixed
camera [photo&video]
Flac audio codec
home button
volume [increased]
flash the zip and do a factory reset
DOWNLOAD
Click to expand...
Click to collapse
Why still do factory reset? I just flashed and reboot works fine.
mmmmmmm Thanks for it
What about battery drain ????
Nice! Downloading, will test tonight.
Sent from Vietnam
Thank you
Q: How to use adoptable storage feature? I see it's new in Marshmallow
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings @remilia15
Lol !
we are here in Nougat Not Marshmallow
Thanks to all Contributor to build this Lineage Os For G360H, At least we got it :good:@[email protected] fixed the many bugs of Beta-1 so Please update Beta Version and Bug list @remilia15
Whats about Battery drain issue? Who already Install this Rom please review it,
Thanks you
adamh.ayyad said:
Q: How to use adoptable storage feature? I see it's new in Marshmallow
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings @remilia15
Lol !
we are here in Nougat Not Marshmallow
Click to expand...
Click to collapse
Mtp is currently having problems.
Sent from my SM-G360H using Tapatalk
---------- Post added at 07:00 AM ---------- Previous post was at 07:00 AM ----------
noman6999 said:
Thanks to all Contributor to build this Lineage Os For G360H, At least we got it [emoji14] :good:@[email protected] fixed the many bugs of Beta-1 so Please update Beta Version and Bug list @remilia15
Whats about Battery drain issue? Who already Install this Rom please review it,
Thanks you
Click to expand...
Click to collapse
Battery drain is common so just ignore it lol.
Sent from my SM-G360H using Tapatalk
SupulEdirisinghe said:
Mtp is currently having problems.
Sent from my SM-G360H using Tapatalk
Its working with me
Click to expand...
Click to collapse
@remilia15
Nice job my little sister
Anyway, I hope @AtomR saw this thread
It has been a very long time since my last post on XDA. I've been so busy with my job, and haven't got time to visit here
How are you guys all going?
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Most things are working at the moment except ones in BUGS/Not working list
BUGS/Not working :
RIL isn't working (no calls, messages, etc...)
Camera can't capture, or recording (and still buggy on next start)
Can't capture screen (I was doing hacks to make screen capture working XD)
Browsers may not working properly. In this case, install Google Chrome from Play Store instead (it may still not work too )
No FM radio (unsupported on this platform)
Offline charging works but NO animations
And many more, so don't expect too much on the first alpha build!
First time installing AOSPE to your Galaxy Grand Prime VE, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
NOTE: First boot might take long time, due to deodexed build, so don't consider bootloop!!
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Drive link
XDA:DevDB Information
AEX O, ROM for the Samsung Galaxy Grand Prime
Contributors
remilia15, naimrlet
Source Code: https://github.com/remilia15?tab=repositories
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Testing
Created 2017-11-04
Last Updated 2017-11-04
F.A.Q
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G531BT
Q: Is init.d supported on this ROM?
A: Almost every custom ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: Can't install GAPPS?
A: Install TWRP 3.0.2.0
CHANGELOG
ALPHA-1: Initial release
Yet another reserved for special case....
Big kudos to you Remi-chan <3
Finally we get to taste Oreo before GP got it xD
Can i root ??
Hi Remilia
If you can add this feature on new version
1. Dual screen(with this feature can run tow app .one app on top screen e.g. Gallery on up screen and Telegram on down screen -screen split)
2.Bluetooth Visibly setting
3.after fix rill 3G only on network mode setting
I Know you try to fix all bug but I suggesting on side base work you try to add this feature
Thank you for big work and nice work
WiFi not working ._. in G531H
isaacdvid said:
WiFi not working ._. in G531H
Click to expand...
Click to collapse
Still working here ==
Thanks for your work Rem
isaacdvid said:
WiFi not working ._. in G531H
Click to expand...
Click to collapse
It's working here
Tested by me and a group of testers
Next time if you want to report bugs, please and PLEASE include logcat and also if you can, tell how to replicate the issue. Just telling what is not working will be ignored next time.
Its like some people says "Logcat or GTFO" (But don't take it personally)
when i flashed gapps pico package , i opened google play ,but it shows me that cheking info for more than one hour and i can't sign in !!
wifi was fast and i downloaded wallpapers from wallpapers app
Miracles being made for this device.
Good Work!
How to take logcat?
Very good sensei :fingers-crossed::good:
i will always wait for the latest stable version
im waiting for a stable release....go remi chan
@naimrlet or remilia can anyone answer thatbwjat is the system partition size for this ROM as I don't have enough storage to patch this ROM dual boot. I want to know as If its possible I will try to clean my system partition or else would search for other method. I asked the same question on the dual booted thread Sorry for that but I'm really impatient to try this ROM.
Could you help zim555 with los15?
Awesome ROM, very smooth, but as reported that none of the browsers work, Google app, playstore, Google play services, installed manually using apk, force closes. WiFi working fine, Bluetooth working fine. Using Aptoide as an alternative to play store
My friend has G531H, he asked me to find an android O ROM for him, so i found this one. Can you please tell me what bugs may him find in this ROM? Such as SIM cards, mobile data and other connections, camera, google apps...Please answer me :laugh:
---------- Post added at 08:41 PM ---------- Previous post was at 08:34 PM ----------
Oh! Now i read the first post and saw what is not working ? Anw thanks
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
RIL [partially]
WiFi
Bluetooth
Camera
HW video codecs
Almost any other hardware stuffs are working properly
BUGS/Not working :
For screenshots and camera, check note (*)
Obviously, FM radio isn't supported, as there's no sources for it
Offline charging doesn't work
RIL [crashes while choosing network provider on 3G signal]
[Using STK makes RIL crash also]
WiFi Direct/hotspot doesn't work
[NOTE]:
If you couldn't take screenshots, go to /system/vendor/lib/hw, make a backup of [email protected] somewhere else, then delete it from this folder
The camera preview will freeze and you can't capture or record after this. To restore original camera function (but will derp screenshot again), restore the backed up [email protected] again to /system/vendor/lib/hw
First time installing LineageOS 15.1 to your Galaxy Grand Prime, or coming from another ROM:
Install latest TWRP Recovery MUST USE VERSION 3.2.2-0 OR ASSERT ERROR OCCURS
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
NOTE: First boot might take long time, due to deodexed build, so don't consider bootloop!!
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
[NOTE]:
If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
This is Android Go build, which is "optimized" for devices with lower than 1GB RAM, so don't expect full features like older Android versions [should we need ordinary build also?]
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Drive link
Want some screenshots? Get them in Screenshot tab above
Thanks to @Alando123 for providing screenies :")
XDA:DevDB Information
LineageOS 15.1, ROM for the Samsung Galaxy Grand Prime
Contributors
remilia15
Source Code: https://github.com/remilia15?tab=repositories
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 5.1.1
Based On: LineageOS
Version Information
Status: Alpha
Created 2018-07-09
Last Updated 2018-07-21
CHANGELOG
ALPHA-1: Initial release of LineageOS 15.1
F.A.Q
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: Just SM-G531BT and SM-G531H
Q: Is init.d supported on this ROM?
A: Every LineageOS/CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, and mention this thread
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: Can't install GAPPS or ROM?
A: Install latest TWRP
Older TWRP than required
remilia15 said:
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: Just SM-G531BT and SM-G531H
Q: Is init.d supported on this ROM?
A: Every LineageOS/CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, and mention this thread
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: Can't install GAPPS or ROM?
A: Install latest TWRP
Click to expand...
Click to collapse
For those of you who are on TWRP v3.1.1.0 please use this link as it resolves the error 7 issue when flashing with that version of TWRP
WEW noice, tho why everything that's fun always happened while I am sleeping? ;---;
Good work @remilia15
Powerfull....
wow ... Thanks for you because you have successfully turn on gpve with OREO OS with healthy RIL, although there are still other bugs, I think no problem. I will instantly install this rom to my gpve, Thanks again to your team of developers. I will wait for the next version! . :good:
Wow Oreo is here for grand prime ??, So it's better than lineage 14.1 (I use it now ) ? any advice! and specially random reboot after long mobile data usage i wish that bug fix forever ?!
Sent from my Samsung SM-G531H using XDA Labs
So, custom kernel and custom build prop dont works?
vinik9123 said:
So, custom kernel and custom build prop dont works?
Click to expand...
Click to collapse
No custom kernels work for now
Sent from my Xperia Z1 using XDA Labs
I love your work!
Sent from my SM-G531H using XDA Labs
Congratulations on the excellent work. OpenGapps Pico 8.1 features FC in Google's play services.
...ништяк...
How I can take screenshots?
Every time that I want take a screenshot, show a notification that I can't, from system Android
Sent from my SM-G531H using XDA Labs
MUELAJE said:
How I can take screenshots?
Every time that I want take a screenshot, show a notification that I can't, from system Android
Click to expand...
Click to collapse
If you couldn't take screenshots, go to /system/vendor/lib/hw, make a backup of [email protected] somewhere else, then delete it from this folder
[*]The camera preview will freeze and you can't capture or record after this. To restore original camera function (but will derp screenshot again), restore the backed up [email protected] again to /system/vendor/lib/hw
MUELAJE said:
How I can take screenshots?
Every time that I want take a screenshot, show a notification that I can't, from system Android
Sent from my SM-G531H using XDA Labs
Click to expand...
Click to collapse
Read OP!!!
Great work remilla.........have been waiting for this:good:
Alando123 said:
Read OP!!!
Click to expand...
Click to collapse
I read the op, i just wanted a practic explication?
Sent from my SM-G531H using XDA Labs
I need help
I can not take screenshots
But..
How do I enter the system folder?
Andresvela7878 said:
I can not take screenshots
But..
How do I enter the system folder?
Click to expand...
Click to collapse
You need root and root explorer app
Sent from my SM-G531H using XDA Labs
great job. i have been waiting for this for a long time will there be a stable version in the future?