Hello guys , It happened in his hands a Deco77x with Andorid 4.4.2, not to throw it I put it back to life with a custom ROM, a Andorid 5.1.1 porting a Galaxy A3 currently installed. I tried the Lollifox, the CyanogenMod 12.1, I have tried several kernel including the "Franco kernel", adapted as one its appropriate there. I have traveled far and wide. But going to the point, the terminal mounting a MediaTek MT6572 CPU, 2 Cores, ARM Cortex-A7 at 1.00GHz, I can not in several GHz overclock to bring in more 'of 1.00 ... even if the operations are all going cheap end more 'of 1.00 just does not go. Putting the chip no longer 'of the power holders, perhaps limited by the producers themselves in a specific version for this phone, I've found on the website of MediaTek these data, "Dual-core chip (1.2GHz) ARM Cortex-A7 processor" so just do not understand because 'more' of 1.00 can not go there. I arrived to the extreme and I address you. Here I write some data that might help.
Info Deco77x
-CPU MediaTek MT6572 ARM Cortex-A7 at 1.00GHz
-GPU Mali-400 MP
-root KingRoot
-Flashify
-Recovery "Philz Deco recovery"
-Chamelephon 1.0
-no-Frills CPU Control
-Trickster MOD Kernel Settings
Related
Hi Guys,
Just got me a used Tablet and I'm Having real difficulty Identifying the manufacturer.
Maybe someone with more know how can help me out.
Here's the info from system info droid:-
Device: rockchip HC801
Android: 4.1.1
CPU max frequency: 1608 MHZ
CPU Cores: 2 -- (Armv7 rev0 (v71)
GPU: Arm Mali-400MP
System Ram: 876MB
display: 1024x720(9.73)
Here's the info from CPU Z
CPU Architecture ARM cortex-A9
Model HC801 (rk30sdk)
Any help would be most grateful, as I'm stumped and would love to be able to Root this thing.
Cheers Guys
A bit more info using Moborobo
It says rooted but can't gain root access
Model:HC801
Firmware version:4.1.1
Status:ROOTED
Resolution:1024*768
Manufacturer:Unknown
Serial:0123456789ABCDEF
IMEI:Unknown
IMSI:Unknown
Android Version:4.1.1
Baseband version:Unknown
Kernel version:rk30sdk-eng 4.1.1 JRO03H eng.root.20121010.205526 test-keys
Still flags up as HC801 ? Can't find anything on Google
Take a look at here...
http://jullianknight.blogspot.com/2012/08/touch-global-rk30sdk-97-dual-core.html
or
http://www.shelfdroid.com/touch-glo...en-tablet-pc-16gbbluetoothdual-camera-silver/
is this your tab??
well, it seems like a Chinese tab...
and the brand is UNKNOWN so rooting this tab or searching for stock firmwares is not a good idea...you won't find any trusted sources.
So careful when you look for these stuff
Hi friends.. this is my first post. So pardon me if I am posting in the wrong place.
I have a Swipe MTV Slash 4x tablet. In case you are wondering, its a chinese OEM tablet that has been imported & sold here in India by Swipe Telecom under their brand name.
Its based on a quadcore mediatek 8382 soc clocked at 1.3ghz & the GPU is a dual core Mali 400MP clocked at 533mhz. RAM is 1GB. Being of chinese make, the tablet came shipped with Jelly Bean 4.2.2 which is mostly stock with very little to no skinning.
I rooted the tablet very easily using Framaroot v1.9.0. I have installed Roehsoft Ram Expander & Xposed (Gravity Box module) & thus far everything is fine. I remember reading somewhere(guess wikipedia) that the mt8382 is designed for tablets & can run stable at speeds upto 1.6ghz. However since its meant for entry level & lower mid range devices, its usually underclocked to 1.2/1.3ghz out of the box.
I want to try my luck & "overclock" the cpu a bit. I am aware that the stock kernel doesn't support overclocking. So I basically have 2 options..
1. Flash a custom kernel that supports oc
2. Flash a custom ROM that ships with a kernel supporting oc, like cyanogen mod or anything else.
Here is my problem. I am unable to find a kernel or a ROM that is compatible with my device. I am aware of the risks involved in overclocking & am prepared to back up all my data & install a custom recovery before proceeding. I am also mentally prepared for the worst case scenario - a permanently bricked device.
Can somebody help me in finding a kernel for my device that supports overclocking or a custom ROM that has built in oc support?
I am attaching some screenshots that will help you in getting an idea of what device I have.
Thanks in advance
I own a NAXA brand android tablet, actually is "NAXA CORE" model NID-1006.
ARM Cortex-A7 quad core @ 1.3 Ghz.
I'm trying to root it and I would like some information from somewhere here before I attempt anything. Has anyone managed to successfully root this device? And if so, what did you use and what steps did you take?
Any information would be helpful.
Some more info on the tablet from CPU-Z:
SoC:
ARM Cortex A7 @ 1.30 Ghz (4 CPUs)
Revision: r0p3
GPU: Mali-450MP
Device:
Model: NID-1006 (W109G_1504033)
Manufacturer: alps
Hardware: mt8127
System:
Android Version: 5.0
API Level: 21
Bootloader: Unknown
Build ID: NID-1006_W109G_1504033
Kernel Architecture: armv71
Kernel Version: 3.10.54 (1432093087)
I'll give this a friendly bump. Was considering getting one of these cheaper tablets, but knowing there is a root out would be nice.
Small update. I've run both versions of Kingo Root on it, the desktop one over usb, and the APK version and while they "Appear" to work, that is.... they say "Successful!" and reboot the tablet.. it never works. When it comes back up I run root checker and it says not rooted.
So does anyone else have any remote ideas what I could try with this thing?
If anyone needs me to get and run some tool to scan it or something just ask, I'll cooperate.
I'll give one more try and ask politely for any help for this.. or if anyone could at least point me in the direction of where I could try and get this thing rooted? Something else to try?
If there's no replies this time I guess I'm forced to give up on the hope of ever rooting this thing and let this thread die naturally.
Hi everyone
I have this android tv box below, and i need remove android 4.4 and put some linux version inside box, like raspbian, kaliarm or other.
Is possible ? Some can help ?
Operating System: Android 4.4.2 KitKat
CPU: Quad Core Cortex-A9
Processor Frequency: 96-1488MHz
GPU: Mali 450
Thanks
Dhy3ives said:
Hi everyone
I have this android tv box below, and i need remove android 4.4 and put some linux version inside box, like raspbian, kaliarm or other.
Is possible ? Some can help ?
Operating System: Android 4.4.2 KitKat
CPU: Quad Core Cortex-A9
Processor Frequency: 96-1488MHz
GPU: Mali 450
Thanks
Click to expand...
Click to collapse
I'm sure you're no longer searching for the answer but here it is for those that come against it.
Long Answer: It depends, if the developer supports open source on their hardware and provides everything for a complete root of the device. Then if that is the case you would need to have all the exact model numbers and hardware versions for your chips. WiFi, Bluetooth, North bridge, South Bridge, etc etc. Then you would need to compile the kernels for all of those into your operating system. After that you would need to reconfigure your bios to to boot from the medium you put the completed image on. After that you would need to carefully install the OS. My guess is it wouldn't work the first time and you would have to do some tinkering to get to work properly. After all that you no longer have support on the device. All of that would be null and void.
Short Answer: Your better off just buying a micro PC for 150 on Amazon and using that. The potential for disaster with a non IT Expert is just plan Russian roulette. At that it only may be possible your hardware vendor could not support rooting the device. Then you would need to see if others have built a root package that unlocks the boot from as well.
Well, First, the Motorola XT300 was my first android phone, and I loved use it because it was small, and have a backtrack (like a mouse for the phone).
There are the specifications (You can see it on GSM Arena)
OS: Android 2.1 (Eclair)
Chipset: Qualcomm MSM7225 Snapdragon S1
CPU: 528 MHz ARM 11
GPU: Adreno 200 (Not activated) (Need drivers)
Well, first of all, It suppousedly had an Adreno 200, but the phone not come with the installed driver and use Software acceleration which makes the phone to be slow in everything. Someone can help with It and say if it have an Adreno 200? and If the phone have it, someone can activate it or tell me how? I want to use it back but the phone is too slow including in the launcher and apps like messages or calls.
If someone activate the GPU, I don't know if someone is interested to make a recovery CWM, or a custom rom (android 2.3 , 4 or 4.4.2) for this phone. It have like 8 years more or less... But first of all I want to make the GPU works xD Thanks to everyone