Hi there, I have a bell atrix and I've been trying to root it for a while now. I've been searching through forums trying to find a safe and reliable method that works for non-ATT atrixes but haven't found anything. Can anyone help?
Here is some more info on my phone:
Android Version: 2.3.6
Build #: 4.5.2A-51_OLL-17.8
I'm not sure what else is needed, but I hope this will do.
Thank you!
go to atrixforums dot com and click on the first thread under atrix hacks. has everything you need to know. sorry cant post a link yet as i am a new member to this forum
Was this any help? again, sorry for not being able to post links yet.
Hey thanks for the info, I've had a busy week so I only just saw your post and I'm going to go try it out now. I'll let you know how it went!
I just had a look at it, but I haven't tried it yet. There are a couple things that worry me about it.
1. It says it was made for ATT, and if Bell releases a future update (we can always hope!) then I might have problems downloading it.
2. How hard is it to actually to unroot the phone if I ever need to?
Have you had any experience with this and can offer any insight?
Thanks for the help again!
Hi Mates,
we have a phone called "HTC rider model X515e".
we could not found any custom roms for it. In google we find most of chinese sites but it was difficult to understand.
Any experts here who can guide us to find a custom rom and guide that will suit us.
we have some how managed to root our device.
Any help mates?
moving to general section
If you guys have rooted it then you should also be able to port a Rom as well. There are guides to porting generic Roms, as well as specific guides for CM7/9/10 and certain versions of MIUI.
http://forum.xda-developers.com/showthread.php?t=1598713
You can try this one, but there are others as well if you need them. Odds are you guys will have to put in the work yourselves because if it's not a popular phone devs aren't going to take the time to do a one-off port. That said, if you do it yourself you'll learn a lot and be able to bring over any Rom you like.
Hi everyone,
I'm a complete noob when it comes to this stuff. Recently, my phone has been running really slow, and I remembered people saying that rooting and flashing custom roms will help increase the efficiency of the phone. I've been looking through tons of threads and countless google searches trying to find a tested and working method for BL unlock and root for a stock MB860 on Android 2.3.6 -- 4.5.145. Yet I haven't found anything. Can I get some suggestions/help? Thanks.
PS - I plan on getting the SGS4, but till I see some actual benchmarks/comparisons between the two chipsets that they phone is shipping with, I'll have to rely on my Atrix 4G. And right now, as I said earlier in the post, it's acting extremely sluggish in every sense of the word.
-Pat
check this out yet?
http://forum.xda-developers.com/showthread.php?t=1302423
robyn402 said:
check this out yet?
http://forum.xda-developers.com/showthread.php?t=1302423
Click to expand...
Click to collapse
Wow thanks. Everyone posting on there says it's real easy to use. Unfortunately no one has system version 4.5.145 like I do. I'm not sure how important that actually is but I have read that version does matter. But it is nice to see people have used it successfully used it with 2.3.6. I posted on that thread and am waiting for a response. Thanks again.
Dear Android Fans,
I have searched a lot and not found a working solution yet. I have seen postings in that area though ... therefore I'm posting here, hoping that I did not miss anything:
I have a S3 I9300 with CM11 (Build cm_i9300-userdebug 4.4.2 KOT49H InstallerXNPQ08Q, Build date 19-Feb-2014 17:25:29).
I aim to visit websites having flash (e.g. Adobe's Test page[/URL or a [URL="http://portevergladeswebcam.com/"]site I often visit).
I have followed the step by step guideline without success. Repeated it multiple times to ensure that I did not miss anything.
Is there any fix or pack to install or any type of workaround, that I can still view sites with flash ?
Thank you in advance.
Best regards
Zac_df1
I know there are a thousand threads on Rooting/Unlocking and Custom ROM's for the Atrix, because I've spent the last 3 days reading every one I could find. However, most of them appear to be very dated and often conflicting. As I'm coming to the game a little late I was hoping for some assistance on how to proceed.
Here's what I have;
AT&T Motorola Atrix 4G (I bought this new under contract, kept it for 2 years, upgraded to another phone and this one has been a paperweight for the past 18 months) AT&T will give me an unlock code if I ask, but I'm a little confused by the conflicting reports on whether to do it this way or not.
It's an MB860
FW Version 4.5.141
OS Version 2.3.6
Baseband N_01.77.37P
Webtop WT-1.2.0-110_OLY-6
Kernel Version 2.6.32.9
Build 4.5.141
I'd like to Unlock it so I can run a Foreign SIM card, I'd like to Root it so I can add non-approved apps, and I'd like to play with some ROM's, Redpill has some very good user reviews so I'm thinking of giving it a try but I'm not stuck on it.
Obviously don't want to brick the phone, so any advice would be appreciated, the more detailed the better
I have Windows 8.1, Mac OS X, and Windows XP-SP3 computers to work with.
Thanks in advance for any assistance.
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
As for rooting, regardless of the variant or firmware version of your device, the preinstall method is the one to use. By far the most universal, plus personally and generally I dislike any "automatic", "one-click" or similar methods - for me at least they are usually more trouble than they're worth.
As for playing with ROMs, you first need to unlock your BL, then install a custom recovery, and then you have a shot at ROMs. So quite a wide topic with plenty enough threads created on the subject, so no point in repeating what's already said countless times. By the time you're done with other things mentioned (SIM unlock, rooting) you should be able to find your way around.
Sequence
ravilov said:
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
Click to expand...
Click to collapse
Thanks for the quick reply. I've requested an unlock code from AT&T, should be good to go in 48 hours.
In the mean time, is it important that I have it unlocked before I root, or will it matter?
Update
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
arkansascontrols said:
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1302423
I just did it with my old A4G. No issues exist in procedure.
Motorola Atrix KCC-MB860- rom
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
manoj panay said:
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
Click to expand...
Click to collapse
Meanwhile you have ROMs all over the place here in the Atrix 4G section of xda that you are not going to go download, rather you are going to request a ROM for the phone instead. Head over to the development section and download a ROM instead of requesting the necessary resources that are already available to you.
Sent from my ATRIX HD using XDA Free mobile app
help me recover my phone
i downloaded and tried to flash with lots of rom.... non of them was working with this model .... please help me. . . . i was rooted and unlocked the boot loader and erased the original rom to flash the downloaded rom . . . know non of the rom in this site is working and in my phone only hardware is remaining, i mean it is not bricked , i can boot it and i can go to fastboot mode, android recovery mode, rsd mode,, atc.... actually i want suitable ram for that model so please......
my phone model: kcc-cmm-mot-w-mb860-0211 ( and all the remaining thing are written in Chinese ) it is a unlocked phone and am using in india . . .