I've noticed there is a Hard Brick Fix for the LeEco Le 1 Pro (x800) http://forum.xda-developers.com/leeco-le1-pro/how-to/leeco-le-1-pro-x800-hard-brick-fix-t3393161
Does anyone have the rescue files for the Le Max 2 x820?
I can't get into fastboot to flash and the only access to my phone is through QFIL via usb (qualcomm HS-USB QDLoader 9008). I'm unable to find the files for this phone model online for QFIL to unbrick it.
It would be really appreciated if someone could help. (My model is the standard x820 32gb model)
Hi,
I dont have a dump, but if you research howto create one, I could make a nand dump from my phone.
Regards
azzulike said:
I've noticed there is a Hard Brick Fix for the LeEco Le 1 Pro (x800) http://forum.xda-developers.com/leeco-le1-pro/how-to/leeco-le-1-pro-x800-hard-brick-fix-t3393161
Does anyone have the rescue files for the Le Max 2 x820?
I can't get into fastboot to flash and the only access to my phone is through QFIL via usb (qualcomm HS-USB QDLoader 9008). I'm unable to find the files for this phone model online for QFIL to unbrick it.
It would be really appreciated if someone could help. (My model is the standard x820 32gb model)
Click to expand...
Click to collapse
I don't know if it can help you. But I thought I was stuck in qfl (blue LED) until I was able to go to fastboot by pressing vol - & power from the qfl. In fastboot I was only able to send data by sending the command from PC and connect after the phone.
Regards
Sent from my Le X821 using XDA-Developers mobile app
Thanks, but unfortunately I can't get into fastboot to flash a normal firmware. I can only access it with the QFIL tools in its emergency / diagnostics mode.
hi guys..
any news for this device..? anyone has qfil fw..? Le Max 2 x820?
I havent found the qfil rom, but if you can get into fastboot mode, this one might be able to flash restore to factory defaults if things are corrupted, and cant install TWRP.
Try the rom at "blog.geekbuying.com/index.php/2016/06/06/letv-leeco-le-max-2-x820-android-6-0-qualcomm-snapdragon-820-smartphone-firmware-205095-160606/" it might help you.
It contains the necessary batch files to flash all the partitions, but I think my phone might be a lost cause.
I have same problem. i can't boot into fastboot mode when I press power and VOL - it's only show darkscreen with LED blue. How can i exit this mode.
hello, I will not turn my phone due to the same problem. I can only access the fastboot mode. How did you solve the problem?
I also have the same problem. Maybe some one may ask for chinese friends to help us? official le eco refuse to help us (US, India, Russia)
I got it But ...
Hi guys, I'm new here. I got the files on a Chinese forum after much searching, soon put a link to you guys.
he returned to work however, the system is using 20gbs and leaving only free storage 9Gbs.
New results
Hello gays,
i've got new results .... now i have 20Gbs free storage, later i will try other thing to increase that and make a tutorial step by step to help who have this problem!!!!
sorry for my bad english i'm brazilian ...
zandordimitri said:
Hello gays,
i've got new results .... now i have 20Gbs free storage, later i will try other thing to increase that and make a tutorial step by step to help who have this problem!!!!
sorry for my bad english i'm brazilian ...
Click to expand...
Click to collapse
I restored my Le Max2 with qfil files. After completion, wipe all in stock recovery. I think you should format the internal SD after that and your storage will show correct figures.
Sent from my Le Max2 using XDA Labs
How?
valy_cta said:
I restored my Le Max2 with qfil files. After completion, wipe all in stock recovery. I think you should format the internal SD after that and your storage will show correct figures.
Sent from my Le Max2 using XDA Labs
Click to expand...
Click to collapse
Hi!
How can i do that? what qfil files u use?
i'm flashing all .img using fastboot trying to get better results....
How can i format all storage?
zandordimitri said:
Hi!
How can i do that? what qfil files u use?
i'm flashing all .img using fastboot trying to get better results....
How can i format all storage?
Click to expand...
Click to collapse
Use the files and info from here http://www.letv.re/topic/1471-unbrick-le-max-2-qfil-rom/
I used FlashOne to flash the qfil files. After this I booted into the stock recovery and wiped all. After this I booted into the system and formatted internal storage.
Sent from my Le Max2 using XDA Labs
valy_cta said:
Use the files and info from here http://www.letv.re/topic/1471-unbrick-le-max-2-qfil-rom/
I used FlashOne to flash the qfil files. After this I booted into the stock recovery and wiped all. After this I booted into the system and formatted internal storage.
Sent from my Le Max2 using XDA Labs
Click to expand...
Click to collapse
Hello valy_act,
the link is no longer available .... may could u share with me?
QFIL files i have doesn't work on FlashOne...
thanks
zandordimitri said:
Hello valy_act,
the link is no longer available .... may could u share with me?
QFIL files i have doesn't work on FlashOne...
thanks
Click to expand...
Click to collapse
Here you can find the files for FlashOne https://drive.google.com/open?id=0B8In_WJch-UvQ3RtOGstbXdqUWs for QFIL files https://drive.google.com/open?id=0B8In_WJch-Uvb0xBbnBtbTlISDg
- To enter Qualcomm Recovery mode, turn off the phone. Keep pressed vol up and vol down and turn on the device by pushing the power button.
- Connect the phone by USB cable to the computer.
- You will see that the computer will install drivers for "Qualcomm HS-USB QDLoader 9008".
- Unzip FlashOne and enter "main.exe". You will see the flashtool and up you'll have "Flash Type". Here select "Qualcomm - flash dead phone".
- Select your phone - "Qualcomm HS-USB QDLoader 9008" from "Select device"
- Select File "LeMax2QFIL.zip"
- Check "Erase Userdata"
- Press "Flash" in the lower part of the window.
That's it. More info you will find in FlashOne, actually it's almost like I've described it here.
You will be reverted to a "dev" version of the phone, somewhere with April build date. Keep in mind that it's EUI 5.6 and the kernel is different than EUI 5.8. Update it to 017 or 019s with stock recovery and then install the custom recovery of your choice.
Most of the guys install a recovery for 5.6 on EUI 5.8 or vice versa and then they get the blue LED. That's why read the instructions below and make sure you know which one you're flashing.
I said I will make a guide on how to restore the Le Max2 but I had no time. I will do it soon just to make all the info centralized and to know what happened to the phone when you connect it to the computer and it shows only "Qualcomm HS-USB QDLoader 9008".
If you have any questions or you require more assistance, feel free to ask.
ahmet_d said:
hello, I will not turn my phone due to the same problem. I can only access the fastboot mode. How did you solve the problem?
Click to expand...
Click to collapse
flash rom via fastboot
baky126 said:
flash rom via fastboot
Click to expand...
Click to collapse
I' m in the same situation. Wich rom can i flash via fastboot?
victor18rp said:
I' m in the same situation. Wich rom can i flash via fastboot?
Click to expand...
Click to collapse
http://forum.xda-developers.com/le-max-2/help/how-to-stock-rom-recovery-t3419377
baky126 said:
http://forum.xda-developers.com/le-max-2/help/how-to-stock-rom-recovery-t3419377
Click to expand...
Click to collapse
This doesn't help me because it asks to put an archive into device, and I cant power on it :$
Related
Hi everyone,
first of all, I guess there should be a section dedicated to the Z5 to keep the forum clean!
Other than that, I'm really having trouble with my Z5. I can't find a way to move on from fastboot mode! Can't boot to edl, tried to flash recovery but they won't boot and so on...
Do someone has some idea? I can provide every information you need to troubleshoot that!
Thank you in advance,
Lorenzo Benevento.
Hi , inside stock firmware which .img files you have ?
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
edsmanco said:
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
Click to expand...
Click to collapse
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Teddy Lo said:
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Click to expand...
Click to collapse
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
help
how do u fix it? i have the same problem here, please help
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
Yes, how do u fix it? Share withy us.
xplozia said:
Yes, how do u fix it? Share withy us.
Click to expand...
Click to collapse
Join the telegram group: Lenovo Z5 Brasil, the guys there can help.
I used qfil to restore it.
I also used the video by rendroid. Send him a PM and he'll reply.
Hi there!
I've been trying out a few things and was wondering how on Earth you got it into fastboot mode in the first place? I can't find a way.
xplozia said:
Hello,
I bricked my Lenovo Z5. I need your help, please!
I installed from fastboot, Pixel Dust ROM and after that, the phone not starting. When I connect the phone to PC, I have message with Unlocking Bootloader (was unlocked initialy, on old rom) then Lenovo logo and after a black screen.
I downloaded ZUI_3.9.075_ST for Lenovo, I installed Qualcomm drivers, I installed Qfill but when connect the phone I don't have 9008 Port, to me is 900E. I read few forums about this error (https://zukfans.eu/community/threads...e-easily.3504/ and https://club.lenovo.com.cn/thread-3021991-1-1.html), I makeed a USB cable for DEEP Flash,I peeled the usb-c cable and touched Green and Black wires, but without success.
I installed a new Lenovo USB driver and with USB cable for DEEP Flash, I put the phone in the 9008 port, and Installed with successful, many ROMs 3.9.075, 3.9.200, 4.0.390 but every time after the first reboot appear message with opened bootloader then Lenovo logo and restarting to infinite.
When the phone is connected to PC I have on the phone a menu with "First Boot Mode" and the phone is accesible from PC:
"C:\Users\user>fastboot devices
bb806aa3 fastboot"
I will apreciate yours help. Thank you!
Click to expand...
Click to collapse
Did you follow this guide? https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/guide-how-to-flash-android-8-1-9-0-t3840839
Yes I see your post and I solved my phone
greetings,
im rookie here but once my MEDIATEK phone got stuck in fastboot mode and i fixed it with connecting to pc and type " fastboot reboot " in adb
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
share the fix
Please refer to the replies above
Lenovo z5s stuck in fastboot
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Thelostman said:
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Click to expand...
Click to collapse
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
xplozia said:
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
Click to expand...
Click to collapse
Don't worry i've already solved with some CHINESE PIROMANCY!!!!!!! Even with effective IMEI restoration (I couldn't restore the 2nd IMEI because I didn't know how to set up this one manually with the method I've used with my lenovo)
Hello,
I have a Lenovo Z5s. I wanted to install new android rom like Pixel Experience
I managed to unlock the bootloader with adb fastboot.
I succeeded in flashing TWRP recovery 3.3.1-0529 for my device.
I've downloaded Pixe Experience GSI rom available here https://forum.xda-developers.com/z5...evelopment/lenovo-z5s-pro-twrp-3-3-1-t3953346
I have copied and pasted the Pixel Experience rom (.img file) on my SD Card.
With TWRP, I have wiped necessary files for a clean install.
I have launched the installation of the rom, installation was complete, the phone has reboot, I show Pixel Experience boot sequence with Google logo. The process asked me a password (Encrypted?) . I decided to reboot the phone.
Now, the phone is blocked with a bootloop in recovery mode. I can't access anymore to TWRP recovery. (Erased?)
To explain clearly the situation: I have the menu showing these options: Restart bootloader > Recovery mode > Power Off > Boot to FFBM > Boot to QMM I> Start
FastBoot Mode
PRODUCT_NAME - sdm710
VARIANT - SDM EMMC
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - ********
SECURE BOOT - yes
DEVICES STATE - unlocked
No Bootloader, no Baseband.
All of the options return the phone back to the same menu.
The situation seems to be critical (phone bricked) and I can't do anything and I don't know what to do. Is there a chance to save my phone?
Your help will be precious to make my phone work.
Thanks in davance . Best regards.
Hey guys i am also in bootloop with unlocked bootloader ,can you please help us to save our phone !!!???
There is no ROM on the device, everything is deleted.
TWRP does not work anymore, but I'm still in fastboot mode.
The device is recognized by Windows as an unknown Android device.
When I install the Coolpad drivers, I can access them with the Flash tool YGDP.
Other flash tools do not work because the Qualcomm HS-USB QDLoader 9008 does not work when set up manually.
I have downloaded the Stock Rom (update zip) and get it with no Flahstool on the device.
Does anyone have the Stock Rom for the Leree Le 3 (C1-U02) in CPB format, I think that would work.
I am thankful for every help
Same here, please help.
Help is here
alkxx said:
Same here, please help.
Click to expand...
Click to collapse
Are you done with your problem??
Yes, I somehow managed to revive the phone by flashing a new boot image with coolpad download assistent.
But if you have a full image, maybe you can post it here to help other people.
Hello guys!
I've been looking for a solution to this problem, I have a Moto One XT1941-5 that was never rooted nor bootloader unlocked. I left it charging and after about one hour it was at Fastboot Mode, it says that it failed booting from normal mode. Even if I try to restart or start normally, it gets back to Fastboot.
What have I done until now?
- Tried to flash the whole latest STOCK ROM again (manually with fastboot tools)
- Tried with a ROM from another region (mine is OPENMX and tried with RETLA) and I get the same
- Tried with Repair Assistant from Motorola, nothing happens.
- Tried to unlock bootloader, it asks me to enable OEM unlock on Developer settings (I can't, phone doesn't power up)
* Something that gets me confused is about the slots, $fastboot getvar all reports that none of the slots are bootable, every time I flash the ROM it says that slot A is bootable and B not, or that A is not bootable and B yes, or none of the slots are bootable.
Here are some screenshots about the info I have.
You can follow these steps from https://forum.xda-developers.com/motorola-one/how-to/unroot-ota-wipe-data-tested-t3905745 and then fastboot erase userdata and try to boot again.
lucasdeeiroz said:
You can follow these steps from https://forum.xda-developers.com/motorola-one/how-to/unroot-ota-wipe-data-tested-t3905745 and then fastboot erase userdata and try to boot again.
Click to expand...
Click to collapse
Just unzipped the bat, and opened with a text editor... those are exactly the commands I manually used, nothing has worked until now.
adri_sefp said:
Just unzipped the bat, and opened with a text editor... those are exactly the commands I manually used, nothing has worked until now.
Click to expand...
Click to collapse
When did you buy this phone?
borksek said:
When did you buy this phone?
Click to expand...
Click to collapse
On June 2018, warranty is not valid any longer. Carrier just give us 1 year here in Mexico.
I never had a problem like this, I was looking forward to find the blankflash for this model but it doesn't exist yet, maybe all I can do is wait for it or hard brick it. :crying:
adri_sefp said:
On June 2018, warranty is not valid any longer. Carrier just give us 1 year here in Mexico.
I never had a problem like this, I was looking forward to find the blankflash for this model but it doesn't exist yet, maybe all I can do is wait for it or hard brick it. :crying:
Click to expand...
Click to collapse
did you manage to solve this problem?
claudiusuflea said:
did you manage to solve this problem?
Click to expand...
Click to collapse
No, I think this problem has to do with the EMMC memory.
Yesterday I was trying again with the Android 10 stock rom using fastboot, nothing changes.
adri_sefp said:
No, I think this problem has to do with the EMMC memory.
Yesterday I was trying again with the Android 10 stock rom using fastboot, nothing changes.
Click to expand...
Click to collapse
that means there's no work-arround
adri_sefp said:
No, I think this problem has to do with the EMMC memory.
Yesterday I was trying again with the Android 10 stock rom using fastboot, nothing changes.
Click to expand...
Click to collapse
also, anyone having an ideea how to hard brick it to qualcomm 908/906 if it's fastboot bricked to blank flash it?
claudiusuflea said:
also, anyone having an ideea how to hard brick it to qualcomm 908/906 if it's fastboot bricked to blank flash it?
Click to expand...
Click to collapse
Even if you do that, there's no blankflash for this model... as long as I know, I was looking forward to find it somewhere but there is none available.
claudiusuflea said:
that means there's no work-arround
Click to expand...
Click to collapse
That's correct, now my device shows nothing on screen, it is just black but when I plug the usb cable, fastboot detects it as fastboot mode, all commands are working but nothing else works.
I'm giving up now.
claudiusuflea said:
also, anyone having an ideea how to hard brick it to qualcomm 908/906 if it's fastboot bricked to blank flash it?
Click to expand...
Click to collapse
UPDATE:
- I finally found a blankflash (my phone still the same) but you can give it a try.
LINK (copy and paste om your browser) drive.google.com/file/d/1-Dgj4WlbitUUHgcZmuBVR_bSendXLdAx/edit
1. To make your phone go to Qualcomm 9008 all you have to do is download an Android 8.1 stock rom from any region, flash it all using fastboot. You may get an error trying to flash boot.img but keep flashing the files.
2. Once you finish flashing and type: "fastboot reboot", your phone will boot into Qualcomm mode, it should be listed in Device Manager.
3. DISABLE any antivirus and download this blankflash, just unzip it and execute the blankflash.bat file.
4. Your phone should boot up in fastboot mode and you can start flashing the latest stock rom.
adri_sefp said:
UPDATE:
- I finally found a blankflash (my phone still the same) but you can give it a try.
LINK (copy and paste om your browser) drive.google.com/file/d/1-Dgj4WlbitUUHgcZmuBVR_bSendXLdAx/edit
1. To make your phone go to Qualcomm 9008 all you have to do is download an Android 8.1 stock rom from any region, flash it all using fastboot. You may get an error trying to flash boot.img but keep flashing the files.
2. Once you finish flashing and type: "fastboot reboot", your phone will boot into Qualcomm mode, it should be listed in Device Manager.
3. DISABLE any antivirus and download this blankflash, just unzip it and execute the blankflash.bat file.
4. Your phone should boot up in fastboot mode and you can start flashing the latest stock rom.
Click to expand...
Click to collapse
works if I have the bootloader still locked?
adri_sefp said:
UPDATE:
- I finally found a blankflash (my phone still the same) but you can give it a try.
LINK (copy and paste om your browser) drive.google.com/file/d/1-Dgj4WlbitUUHgcZmuBVR_bSendXLdAx/edit
1. To make your phone go to Qualcomm 9008 all you have to do is download an Android 8.1 stock rom from any region, flash it all using fastboot. You may get an error trying to flash boot.img but keep flashing the files.
2. Once you finish flashing and type: "fastboot reboot", your phone will boot into Qualcomm mode, it should be listed in Device Manager.
3. DISABLE any antivirus and download this blankflash, just unzip it and execute the blankflash.bat file.
4. Your phone should boot up in fastboot mode and you can start flashing the latest stock rom.
Click to expand...
Click to collapse
followed all the steps, bricking worked, but after flashing the latest software had the same problem
it would be nice if motorola would give us qfil software so we could flash it from the scratch
also, anyone any other option in this case? also found a dump of deen android 10 but I don't know what to do with it
claudiusuflea said:
followed all the steps, bricking worked, but after flashing the latest software had the same problem
it would be nice if motorola would give us qfil software so we could flash it from the scratch
also, anyone any other option in this case? also found a dump of deen android 10 but I don't know what to do with it
Click to expand...
Click to collapse
Was your device detected as Qualcomm? Did you use the blankflash file? Did yor phone boot to fastboot?
adri_sefp said:
Was your device detected as Qualcomm? Did you use the blankflash file? Did yor phone boot to fastboot?
Click to expand...
Click to collapse
Indeed, after flashing an Android 8 firmware my phone went into Qualcomm 908 EDL mode. After blankflashing and flashing the latest firmware had the same issue with "No bootable A/B slot". The same state before hardbricking the phone (AP Fastboot flash mode secure).
adri_sefp said:
Hello guys!
I've been looking for a solution to this problem, I have a Moto One XT1941-5 that was never rooted nor bootloader unlocked. I left it charging and after about one hour it was at Fastboot Mode, it says that it failed booting from normal mode. Even if I try to restart or start normally, it gets back to Fastboot.
What have I done until now?
- Tried to flash the whole latest STOCK ROM again (manually with fastboot tools)
- Tried with a ROM from another region (mine is OPENMX and tried with RETLA) and I get the same
- Tried with Repair Assistant from Motorola, nothing happens.
- Tried to unlock bootloader, it asks me to enable OEM unlock on Developer settings (I can't, phone doesn't power up)
* Something that gets me confused is about the slots, $fastboot getvar all reports that none of the slots are bootable, every time I flash the ROM it says that slot A is bootable and B not, or that A is not bootable and B yes, or none of the slots are bootable.
Here are some screenshots about the info I have.
Click to expand...
Click to collapse
maybe works "lenovo rescue and smart assistant"
Marc.os said:
maybe works "lenovo rescue and smart assistant"
Click to expand...
Click to collapse
No, lmsa would recognise the phones after A10 update, but the problem persists. Someone who has repaired this or someone who has managed to take it to the service or managed to revive the phone from this state? With locked bootloader
Marc.os said:
maybe works "lenovo rescue and smart assistant"
Click to expand...
Click to collapse
That didn't help either, there's nothing else we can do than replacing the main board.
Hello.
I have a similar problem. I have tried all of the methods listed, unfortunately nothing works. I ended up replacing the motherboard. The old PCB is waiting, maybe someday it can be repaired.
My Mi A3 was hard bricked and unbricked it using Mi flash tool , again after a few months in got bricked , I unbricked it again but this time I guess I somehow locked the bootloader , Now my device is bricked again , it's not responding not even charging , I set it in edl mode and tried to flash rom using mi flash tool , but this time the mi flash tool is showing me error "write time out , device may be disconnected"
Have you googled the error message "write time out , device may be disconnected"? There are a few suggestions.
bjlabuk said:
Have you googled the error message "write time out , device may be disconnected"? There are a few suggestions.
Click to expand...
Click to collapse
Yes mate , i tried everything searching on Google , can you please help me mate
I haven't experienced your problem. Could the message relate to the EDL connection? I found this link https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
So (i) when you used Mi Flash Tool did you use 'clean all' or 'clean all and lock'? - that might explain the locked bootloader. (ii) Did you check in Device Manager as per the link I have given? (iii) have you tried the patched firehose file method, as per https://www.droidwin.com/unbrick-mi-a3-fastboot-commands/ ?
Can't suggest anything else other than a repair shop where someone with more experience might be able to sort it.
bjlabuk said:
I haven't experienced your problem. Could the message relate to the EDL connection? I found this link https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
So (i) when you used Mi Flash Tool did you use 'clean all' or 'clean all and lock'? - that might explain the locked bootloader. (ii) Did you check in Device Manager as per the link I have given? (iii) have you tried the patched firehose file method, as per https://www.droidwin.com/unbrick-mi-a3-fastboot-commands/ ?
Can't suggest anything else other than a repair shop where someone with more experience might be able to sort it.
Click to expand...
Click to collapse
Thanks mate for your assistance , i guess last time i flash the device i mistakenly use " clean all and lock"
The device is in edl mode as the port is recognised in the device manager and yes i tried the patched firehose , got the same error "write time out may be device was disconnected"
Okay, how about trying to get out of EDL mode? https://www.droidwin.com/how-to-exit-edl-mode-in-android/ Can you do that?
If you can get out of EDL mode then try flashing the STOCK ROM using the platform-tools, not Mi Flash Tool! https://www.thecustomdroid.com/xiao...2a11363abaea7ed177f9037d4693fae#comment-33230
You will get the latest fastboot images here https://xiaomifirmwareupdater.com/miui/laurel/
bjlabuk said:
Okay, how about trying to get out of EDL mode? https://www.droidwin.com/how-to-exit-edl-mode-in-android/ Can you do that?
If you can get out of EDL mode then try flashing the STOCK ROM using the platform-tools, not Mi Flash Tool! https://www.thecustomdroid.com/xiao...2a11363abaea7ed177f9037d4693fae#comment-33230
You will get the latest fastboot images here https://xiaomifirmwareupdater.com/miui/laurel/
Click to expand...
Click to collapse
My Device is hardbrick so I guess doing it using platform tools won't work
Pyro556 said:
My Device is hardbrick so I guess doing it using platform tools won't work
Click to expand...
Click to collapse
Okay, if it is stuck in EDL mode the only think I can think of is to try using QFIL but you will need to search for the stock firmware for your device in 'Flat Build format' - see attached link and instructions https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
I have successfully unbricked a Wileyfox Swift 2 recently using the QFIL method.
I did try the qflash , it shows
download fail firehose fail fhloader fail process fail
Are you using QFIL from within QPST? https://forum.hovatek.com/thread-30141.html
Also download the Engineering ROM from here. It has the firehose file. https://mifirm.net/downloadfile/66
You're leaving it in edl too long. Hold down the power button for a full 30 seconds. Seriously, count. Now, hold vol up and down for the same. Attach the cable. Release volume buttons. Now, you are freshly in edl. It should work. If you go QFIL, you will need to do this in between each patch.
Check out this link on Sahara: https://www.droidwin.com/fix-sahara-fail-qsaharaserver-fail-process-fail-error-qfil-tool/
Also, you mind posting your patched programmer file? Been having trouble with that.
Eliliyah said:
Also, you mind posting your patched programmer file? Been having trouble with that.
Click to expand...
Click to collapse
Who are you asking? Not sure which file you are referring to?
bjlabuk said:
Are you using QFIL from within QPST? https://forum.hovatek.com/thread-30141.html
Also download the Engineering ROM from here. It has the firehose file. https://mifirm.net/downloadfile/66
Click to expand...
Click to collapse
i will try using this rom let's see
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
have to get someone with authorized account to fix it using edl flash tool, from next time dont use miflash and just extreact the rom zip and flash it with the bat file.
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
hey
I brought mi phone for my aunt and she is facing similar issues too. If you find any solutions do let me know.
ScarletSkies1234 said:
have to get someone with authorized account to fix it using edl flash tool, from next time dont use miflash and just extreact the rom zip and flash it with the bat file.
Click to expand...
Click to collapse
Yes, today, I have been looking for solutions and I see that paying someone with authorized account is the only way to get my phone back. :C ....I didn't know you could flash without the Mi flash tool, thanks, I will try in the future....
msgranger12 said:
hey
I brought mi phone for my aunt and she is facing similar issues too. If you find any solutions do let me know.
Click to expand...
Click to collapse
Hi, I told you that I fixed my phone with the "Xiaomi Pro Tool" (it's paid but cheap). Good luck!
ajanco said:
Yes, today, I have been looking for solutions and I see that paying someone with authorized account is the only way to get my phone back. :C ....I didn't know you could flash without the Mi flash tool, thanks, I will try in the future....
Click to expand...
Click to collapse
My friend tried to flash fastboot image using official android platform tools from google, build march 2022, it didn't work. Always failed when flashing the super partition. Fortunately, he decided to flash it with mi flash build 2020 (forgot which one), and it succeeded. I didn't believe it at first. Weird indeed. I believe xiaomi put something else to their fastboot binary in the mi flash.
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
Xiaomi Flash tool support EDL flashing too...try this version....and also install the Qualcomm driver.