[Update] Samsung is roll out Android 6.0.1 Marshmallow for the Galaxy A5 (2015). So far, these are the variants that have been updated:
A500F (Russia, Turkey, SouthAfrica, Kazakhstan, Romania, Moldova, Caucasus Countries, Uzbekistan and Open Austria).
A500F1 (Korea), A500K (Korea KT Corporation), A500L (Korea LG Uplus), A500S (Korea SK telecom)
A500FQ (Turkey)
A500FU (All Europe).
A500H (Uzbekistan, Bangladesh, Turkey, SouthAfrica, Panama, Paraguay, Trinidad & Tobago, Bolivia, Ukraine, Caucasus Countries and Nepal)
A500W (Canada only)
A500Y (Australia, Chile, Panama and New Zealand)
A500G (India and Sri Lanka)
A500M (Brazil, Panama, Argentina, Bolivia, Colombia, Paraguay and Trinidad & Tobago)
This means that in the coming hours, days or weeks, will begin to upgrade all other variants.
How to update my Galaxy A5?
The update, as always staggered, will go releasing regions (countries or continents), also it depends on whether your mobile phone is free of operator or not (remember that mobile operator take much longer to release the update), even so, are fourth methods in the case of Samsung:
1. The usual way is via OTA (On The Air), for it must enter into Settings/About Phone and paragraph Updates see if the new version of Android is available. If so, you will notice, which will only download the update and wait for the device automatically updated.
2. A second option is to download and install on your computer the Samsung Kies program, connect the mobile and review section updates, if available, the program will download the firmware and install, for which you'll be indicating step procedure He passed.
3. The third option is the Smart Switch program is similar to Samsung Kies program which will also update your device (guide here).
4. The fourth option is to download the firmware from Updato.com or Sammobile.com, or use Samfirm program, and install it manually with the Odin program,
4.1 Downloads Firmwares: (Important note: the following firmwares can be installed on any Galaxy A5 regardless of the country, provided they are the same model (eg A500M)).
Option 1: From updato.com (no sign-ups, no download-speed restrictions)
A500F: Here
A500F1: Here
A500FU: Here
A500FQ: Here
A500G: Here
A500H: Here
A500K: Here
A500L: Here
A500M: Here
A500S: Here
A500W: Here
A500Y: Here
Option 2: With Samfirm Tool (no need nothing):
Here
Option 3: From other servers (MEGA, Google Drive, etc.):
A500G: Google Drive
A500H: MEGA
A500FU (Spain-Vodafone): MEGA
A500M: MEGA
Option 4: From Sammobile (need sign-up, need subscription pay for remove speed-limit):
A500F: Here
A500F1: Here
A500FU: Here
A500G: Here
A500H: Here
A500K: Here
A500L: Here
A500M: Here
A500S: Here
A500W: Here
A500Y: Here
4.2 Download Odin: Here
4.3 Download Drivers: Here
Steps for install:
- [Recommended make a factory reset before the procedure]
- Install drivers
- Unzip the firmware
- Unzip Odin, then right clic and select execute as an administrator option
- Power off the phone. Then enter to Download Mode (press the Power button, Home Button and Volume - togheter until the screen them out a notice that the phone will enter Download mode, then press once the button Volume + and connect the phone to the PC via the USB cable.
- Choose PDA option and select the Firmware.
- Select the Start option
- Wait to PASS notice on Odin window
- Wait to chargue the new system
- Disconnect the USB cable
- [Recommended make a factory reset again]
Enjoy
Vídeoreview of Android Marshmallow on A500FU:
https://www.youtube.com/watch?v=WLZ8dZbgs24
Question: How to Root my Galaxy A5 with Android Marshmallow?
Answer: Here
Bonus:
For those who want to give a different look to your Galaxy A5 can try the Good Lock application is developed by Samsung so it should work smoothly. Requires Android 6.0+, download from here.
Videoreview of Good Lock UI: Here
Gratitude and Credits to:
- TheAbraham696 for upload firmwares A500FU and A500M to Mega.
- Frumy for the tip of Updato.com
- Carlos Armando Nova for the tip of upgrade.
- Eddy Alonzo López for upload firmware A500H to MEGA.
- Ash_003 for upload firmware A500G to Drive.
- BSTech (AKA burimselmani) for vídeos.
I am so excited and cannot wait. ?
Nevertheless I am quite upset about this.
Comparing the Manuals (a5, j5, s6) I found out that the Galaxy A5 won't get a theme store! ? (Which is probably all I really wanted. I've been waiting for this for so long.)
And again Samsung disappointed me.
I hope that this is just a small mistake in the manual but I guess they just again want us to buy a newer phone. ? I hate this policy. Our phone is only a year old but they kind of treat it like it's already dead. (You can't find it on the Samsung website anymore.)
Well okay let's hope for the best. ? (still excited)
Yup, i wait for theme store with MM update, but a few weeks ago when manual updated and heard that will be NO theme store in MM for A500 i give it up and already switch to A5 2016...honestly i like TW but in midrange phones is boring...so update a litle the phone...a litle shame to Sammy but A500 is not so cheap and deserve more...
Sent from my msm8909 using XDA-Developers mobile app
frumy said:
Yup, i wait for theme store with MM update, but a few weeks ago when manual updated and heard that will be NO theme store in MM for A500 i give it up and already switch to A5 2016...honestly i like TW but in midrange phones is boring...so update a litle the phone...a litle shame to Sammy but A500 is not so cheap and deserve more...
Sent from my msm8909 using XDA-Developers mobile app
Click to expand...
Click to collapse
it has been said like 100 times, Samsung wont update the older generation with the new features. Note 3 and Note 4 lack a theme store too...
It is a different branch of TouchWiz, and we will not get it. As long as we get Marshamallow, the other stuff will be easy to port.
That's true, the changes are minimal, as discussed in the Facebook group they have just changed the icons and permission management. No Doze Mode (although Samsung supplies him with their Modes of saving energy), there is not Themes Store and others features, but as the fellow PlutoDelic said, having updated your Galaxy A5 with Android Marshmallow is easier to port several features of S6 and S7 . Do not forget that it is also important is the security patch updated to July -and august- this year. Greetings.
Any idea on whether the released firmware would work on the A500H variant?
you can try the FU version but i dont recomand it can brick you phone
Never try another version, you will 100% brick your phone, i have that experience one year ago....
Sent from my SM-A510F using XDA-Developers mobile app
I flashed the firmware for the A5FU through Odin (Italy, Vodafone) but to me the word "failed" appears as "the volume is too big" or something like that, how can I proceed?
Sorry for my bad english.
lodewiijk said:
I flashed the firmware for the A5FU through Odin (Italy, Vodafone) but to me the word "failed" appears as "the volume is too big" or something like that, how can I proceed?
Sorry for my bad english.
Click to expand...
Click to collapse
The same here. You have to flash the right. .*pit file. The Problem is the Vodafone Brand. The have more bloat installed. So the Partition is not as big as they should.
Google for SM-A500FU pit file with Vodafone brand
digitaliban said:
The same here. You have to flash the right. .*pit file. The Problem is the Vodafone Brand. The have more bloat installed. So the Partition is not as big as they should.
Google for SM-A500FU pit file with Vodafone brand
Click to expand...
Click to collapse
Oh thank you, and where do I find it?
lodewiijk said:
Oh thank you, and where do I find it?
Click to expand...
Click to collapse
For example here :
http://www.sammobile.com/forum/showthread.php?t=30292
digitaliban said:
The same here. You have to flash the right. .*pit file. The Problem is the Vodafone Brand. The have more bloat installed. So the Partition is not as big as they should.
Google for SM-A500FU pit file with Vodafone brand
Click to expand...
Click to collapse
remove the hidden file from inside the tar and zip it again.then reflash
I haven't any problems to update my wife's A500FU with unbranded Ciprus FW, i used Odin 3.0.9 and i download FW from updato.com
frumy said:
I haven't any problems to update my wife's A500FU with unbranded Ciprus FW, i used Odin 3.0.9 and i download FW from updato.com
Click to expand...
Click to collapse
Very thanks bro, links of udpato.com are added on the OP. Cheers. :good:
oss_mosis said:
Very thanks bro, links of udpato.com are added on the OP. Cheers. :good:
Click to expand...
Click to collapse
Any chance of some screen shots? Has quick tiles changed to same as s6 or still same as before
jimbomodder said:
Any chance of some screen shots? Has quick tiles changed to same as s6 or still same as before
Click to expand...
Click to collapse
No changes on quick tiles, system UI is the same with only new icons, and small visual changes in some apps
Sent from my SM-A510F using XDA-Developers mobile app
Thanks for crediting my video, i put your link also on my video description, cheers
ps. Soon Im planing to make a more detailed video about MM
-BSTECH
I tried to flash the firmware with unbranded Cyprus and it says "Volume size is too big 122000 <368648" and then "Odin: Invalid image ext4" how should I do?
---------- Post added at 11:30 AM ---------- Previous post was at 11:15 AM ----------
vasilis EDESSA said:
remove the hidden file from inside the tar and zip it again.then reflash
Click to expand...
Click to collapse
Which file should I remove?
lodewiijk said:
I tried to flash the firmware with unbranded Cyprus and it says "Volume size is too big 122000 <368648" and then "Odin: Invalid image ext4" how should I do?
---------- Post added at 11:30 AM ---------- Previous post was at 11:15 AM ----------
Which file should I remove?
Click to expand...
Click to collapse
There is a file called "hidden".delete from the folder and zip it to tar file again
Related
Hello everyone,
I have a south Korea:
Device spec:
S9 plus G965M with Exynos 9810 and says SK Telecom in the start but I think it's unlocked because I have my Portuguese sim card inside and it's working here in Portugal
Band name Ron : G965N KSU 1ARJ1
This
I've went thru a lot of threads but I got flooded with so many information that I'm afraid of the steps to do.
Main goal:
1. Use the phone in Europe / Portugal
2. Change the ROM because even with reset and English chosen, Android has a lot of menus in Korean
3. Even boot loader for Odin is Korean.
4. Install Android pie 9.0 and continue to receive updates. This phone is stopped in October patch. I think it won't update unless I put a Korean sim
Since the current official ROM 9.0 with oneUI and Pie is for 965F and not 965N (mine), and since N partition is smaller, where should I start or how?
10. Should I start with CSC change? Will that change partition also? To what CSC then?
11. Root? TWRP? Custom ROM?
12. I don't care about Samsung pay, but will I lose VoltLTE?
Thanks a lot for your time.
Hi folks,,,
At first excuse my language just plz try to keep up with me to get help
So I bought an used S9 plus Duos, inside its G965F...software info, build number its also G965F,, outside on the back G965F made in Vietnam,,, i discovered that's there is root and its on February security patch i tried to unroot it using Odin,,,the where i discovered its G965N!!!! Tried to continue by downloading official g965N firmware (pie 9) ... when the device restarted after using odin the phone working or showing just one sim even it was working just fine and even I used pie firmware its went back to oreo!!!
Plz ... Biiiig plz I need advices and solutions,,, I want to clean the root, I want to get updates ... and I want to get both of sim 1 and sim 2 work
Vapochilled said:
Hello everyone,
I have a south Korea:
Device spec:
S9 plus G965M with Exynos 9810 and says SK Telecom in the start but I think it's unlocked because I have my Portuguese sim card inside and it's working here in Portugal
Band name Ron : G965N KSU 1ARJ1
This
I've went thru a lot of threads but I got flooded with so many information that I'm afraid of the steps to do.
Main goal:
1. Use the phone in Europe / Portugal
2. Change the ROM because even with reset and English chosen, Android has a lot of menus in Korean
3. Even boot loader for Odin is Korean.
4. Install Android pie 9.0 and continue to receive updates. This phone is stopped in October patch. I think it won't update unless I put a Korean sim
Since the current official ROM 9.0 with oneUI and Pie is for 965F and not 965N (mine), and since N partition is smaller, where should I start or how?
10. Should I start with CSC change? Will that change partition also? To what CSC then?
11. Root? TWRP? Custom ROM?
12. I don't care about Samsung pay, but will I lose VoltLTE?
Thanks a lot for your time.
Click to expand...
Click to collapse
1: cool, super easy and it sounds like you got it taken care of anyways
2: it’s a Exynos processor, so you should be able to root it and throw whatever ROM you want on it
3: if it’s a Korean model it should accept a G965F firmware flash in Odin which isnt a korean bootloader, and even if its not compatible, Odin will just fail out on the flash unless you have the modded version of Odin that is designed to ignore version mismatch errors and flash anyways
4: manually update it with Odin and don’t fiddle with the carrier specific needs for updates
What happened to 5 through 9?? (kidding, I can read between the lines)
10: CSC stands for country specific product code, or something like that. It tells the phone what market it is supposed to be intended for
11: sure, if you want, but youll trip knox if you do. sure. if youd like to, youre welcome to do that
12: SPay can be wonky depending on your CSC, but voLTE is a firmware/carrier specific. I have a regular S9 that i purchased from Cricket (united states MVNO carrier) and it had voLTE when i got it, but i flashed the G960U1 firmware (the "U1" iteration is the snapdragon unbranded version) and voLTE and WiFi calling are now both gone from my menu
---------- Post added at 10:31 AM ---------- Previous post was at 09:46 AM ----------
oh, and youre not gonna change the partition size to anything bigger than it came with. When you Odin flash the firmware, it wont change the amount of internal storage available unless you inadvertently shrunk it with a firmware flash of a smaller storage base phone, which seems unlikely. This was more common in the standard 16gb internal storage days. If the internal storage amnt is incorrect after a firmware flash, factory reset it in stock recovery and that should correct the issue
Hesni said:
Hi folks,,,
At first excuse my language just plz try to keep up with me to get help
So I bought an used S9 plus Duos, inside its G965F...software info, build number its also G965F,, outside on the back G965F made in Vietnam,,, i discovered that's there is root and its on February security patch i tried to unroot it using Odin,,,the where i discovered its G965N!!!! Tried to continue by downloading official g965N firmware (pie 9) ... when the device restarted after using odin the phone working or showing just one sim even it was working just fine and even I used pie firmware its went back to oreo!!!
Plz ... Biiiig plz I need advices and solutions,,, I want to clean the root, I want to get updates ... and I want to get both of sim 1 and sim 2 work
Click to expand...
Click to collapse
I am suffering the same now... did u find the silution then? Pls help me bro
I.zubair said:
I am suffering the same now... did u find the silution then? Pls help me bro
Click to expand...
Click to collapse
Hello!
Im sorry to tell you that a I didnt find solution ?
For those who don't know, F900U is the model number of all of the US carrier versions of the Galaxy Fold. The F900U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. A "U to U" or "U1 to U1" flash does not require a factory reset, but changing from one firmware to the other will require one. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But AT&T doesn't allow their firmware to be publicly available (for any of their devices). I pay for a subscription to a site that gets the official releases (usually) before they hit SamFirm/Frija, and also gets me access to AT&T firmware, so that's where my files come from. However, I don't have unlimited bandwidth on the site, and it's also quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single Sx and Note x model - so I won't be uploading every single version. I'll definitely do at least one build per bootloader level though.
This is not a "beginner's guide to Odin flashing"-type post/thread, so I won't list basic, step-by-step instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware, I recommend you consult one of the "beginner's" posts/threads - there are tons of them here on XDA.
U firmware: https://www.androidfilehost.com/?w=files&flid=293117
U1 firmware: https://www.androidfilehost.com/?w=files&flid=293118
Happy flashing!
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I compress extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- My naming method for Android File Host folders is: build - bootloader - Android version.
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data.
- I pay for a subscription to a site that gets beta builds and also sometimes gets the official releases before they hit SamFirm, so that's where any of my files come from. I will only be posting versions that I get early access to, and USERDATAs that aren't available on SamFirm or Frija (AT&T). The newest/latest firmware files for all carriers other than AT&T can always be obtained via SamFirm and Frija.
- For USERDATAs (all the others are self explanatory):
AIO = Cricket
CCT = Xfinity Mobile (Comcast)
CHA - Spectrum Mobile (Charter)
TMK = Metro PCS
- the correct procedure for switching from one carrier's firmware to another is:
1. Flash full U1 firmware package including non HOME CSC
2. Upon boot, insert a SIM of the carrier whose firmware you want
3. Watch for the popup that says "reboot to apply new carrier settings" etc, and do it
4. After that restart completes, reboot back to Download mode and flash the full U firmware package, with the USERDATA file of the carrier whose firmware you want
Interesting development, as we approach the release date for the now-redesigned Fold: U1 firmware has appeared!
I have no idea if they were planning for a U1 model all along, but that firmware never showed up earlier this year. I still haven't seen any new U firmware, but assuming that I get access to at least the launch version before the actual release, I'll post it when I get it
Build SH9 has appeared for the U model, along with an AT&T USERDATA. Files have been uploaded to the OP link
Will SHA get OTA to SH9?
mastibeta said:
Will SHA get OTA to SH9?
Click to expand...
Click to collapse
I don't understand your question.
First of all, numbers come before letters. 9 is older than A. If SH9 and SHA were both released for the same model, then SH9 would come first, and then there would be an OTA to SHA.
But SH9 is U firmware and SHA is U1. You can't OTA to a different model's firmware.
iBowToAndroid said:
I don't understand your question.
First of all, numbers come before letters. 9 is older than A. If SH9 and SHA were both released for the same model, then SH9 would come first, and then there would be an OTA to SHA.
But SH9 is U firmware and SHA is U1. You can't OTA to a different model's firmware.
Click to expand...
Click to collapse
Gotcha, didnt realize the u1 was newer. Do you know what CSC frija would have the u1 firmware under?
mastibeta said:
Gotcha, didnt realize the u1 was newer. Do you know what CSC frija would have the u1 firmware under?
Click to expand...
Click to collapse
XAA is always used for U1 firmware. Manual input is required in order to get it, as of right now. They'll probably change that once the device actually releases
Morning. I cant get these files to download. It's been about 30 min and the download says 6 days.
NEVER MIND. After about an hour it went form six days to finished. Lol.
harsaphes said:
Morning. I cant get these files to download. It's been about 30 min and the download says 6 days.
NEVER MIND. After about an hour it went form six days to finished. Lol.
Click to expand...
Click to collapse
AFH's servers are crap, half of the time. If you ever get a slow download, just reload the link and try a different mirror
Really want to do this but have never flashed any type of Samsung software before. Was checking guides but none of them seemed exact. Don't want to Brick my fold and even though I have AT&T I don't want to be behind on updates and have bloatware.
alexrotondo said:
Really want to do this but have never flashed any type of Samsung software before. Was checking guides but none of them seemed exact. Don't want to Brick my fold and even though I have AT&T I don't want to be behind on updates and have bloatware.
Click to expand...
Click to collapse
It's impossible to brick it. And yes, there are tons of very precise and exact Odin flashing guides here on XDA. Odin flashing is always pretty much the same process, no matter the model. Put the phone in Download, make sure you have the right Odin version, extract the zip, load all the files, plug the phone in, and click Start
What is the site you pay a subscription for?
I have a small question... will I brick the Fold, if I flash this to the Korean Version of the Fold (SM-F907N)?
The only version I could buy in where I live is the Korean version, which is a 5G model, but I really want to use my credit cards from USA. I guess I have to have a Fold with USA firmware to use Samsung Pay with credit card from USA, but I don't know what would happen if I flash this firmware... I am okay with losing the 5G, I just want the Samsung Pay works with my credit cards...
STEVEcKONG said:
I have a small question... will I brick the Fold, if I flash this to the Korean Version of the Fold (SM-F907N)?
The only version I could buy in where I live is the Korean version, which is a 5G model, but I really want to use my credit cards from USA. I guess I have to have a Fold with USA firmware to use Samsung Pay with credit card from USA, but I don't know what would happen if I flash this firmware... I am okay with losing the 5G, I just want the Samsung Pay works with my credit cards...
Click to expand...
Click to collapse
You can't flash it. Odin won't allow you to, because those models are not cross compatible. If you want a Fold that does US Samsung Pay, buy one from the US and have it shipped to you
iBowToAndroid said:
You can't flash it. Odin won't allow you to, because those models are not cross compatible. If you want a Fold that does US Samsung Pay, buy one from the US and have it shipped to you
Click to expand...
Click to collapse
Thanks a lot!
Hmm....after I download the F900U1 file the folder says 'empty'.
On the download link the U1 folder says no files. Am I looking in the wrong place?
Trying this again.
OK GOT IT. THANKS
harsaphes said:
On the download link the U1 folder says no files. Am I looking in the wrong place?
Click to expand...
Click to collapse
You must be. I can see it perfectly clear, when I click the U1 link in the OP
Any update on successfully flashed u1 firmware on att fold? Wanting to pick up unlocked one but only the att version is available
I just did mine . If you need help let me know
svickory said:
I just did mine . If you need help let me know
Click to expand...
Click to collapse
sent you a message, have a question or two.
Just wanted to post this so if you have a G973U1 all hope is not lost.
The update size is 604.97 MB and it included night mode in camera.
MB
Meatbag_1 said:
Just wanted to post this so if you have a G973U1 all hope is not lost.
The update size is 604.97 MB and it included night mode in camera.
MB
Click to expand...
Click to collapse
Yeah that uodate started a few weeks ago. I got it a week or so ago.
Tel864 said:
Yeah that uodate started a few weeks ago. I got it a week or so ago.
Click to expand...
Click to collapse
I received August 1, 2019 patch this morning (Tue, 08/19) G970U1UEs2ASGF
mzsquared said:
I received August 1, 2019 patch this morning (Tue, 08/19) G970U1UEs2ASGF
Click to expand...
Click to collapse
I got that overnight also. Since it was fairly small I'm guessing security update only.
Meatbag_1 said:
Just wanted to post this so if you have a G973U1 all hope is not lost.
The update size is 604.97 MB and it included night mode in camera.
MB
Click to expand...
Click to collapse
G'day,forgive me but I'm new at this.
I have just bought an S10 G973UI snapdragon from the US(I am in Australia).
Please help--where do I go to get the update firmware to upgrade from Android 9 to Android 10 or later and please give info for how to do the upgrade.
-thanks in advance
kymsheba said:
G'day,forgive me but I'm new at this.
I have just bought an S10 G973UI snapdragon from the US(I am in Australia).
Please help--where do I go to get the update firmware to upgrade from Android 9 to Android 10 or later and please give info for how to do the upgrade.
-thanks in advance
Click to expand...
Click to collapse
You can use websites like updato, sammobil or samfrew to download firmware for your phone.
Or you can used a PC app called frija to download latest firmware.
spawnlives said:
You can use websites like updato, sammobil or samfrew to download firmware for your phone.
Or you can used a PC app called frija to download latest firmware.
Click to expand...
Click to collapse
G'day thanks for your reply--
ok-Ihave been researching your suggestions-- and the answer is not easy--it is actually complicated because of all the different firmware codes just in the US.,
I can hopefully track it down using my new phone CSC code(I'm learning fast for a newbie)
The reason why I need at least Android 10 is because I will be loading the 'Gcam7.4 and maybe higher.
If I can find out which US version of firmware to flash(and how to do it properly), I still need answers to the following--
---Because this is a US version S10 SM-G973U1 -fully unlocked and no Carrier--
(1) Do I insert my Australian SIM card into my brand new phone BEFORE it is turned on for the first time and BEFORE I flash the new US firmware?
(2) Or do I turn on my new phone for the first time, and flash the update US firmware BEFORE inserting my Australian SIM?
-regards-
kymsheba said:
G'day thanks for your reply--
ok-Ihave been researching your suggestions-- and the answer is not easy--it is actually complicated because of all the different firmware codes just in the US.,
I can hopefully track it down using my new phone CSC code(I'm learning fast for a newbie)
The reason why I need at least Android 10 is because I will be loading the 'Gcam7.4 and maybe higher.
If I can find out which US version of firmware to flash(and how to do it properly), I still need answers to the following--
---Because this is a US version S10 SM-G973U1 -fully unlocked and no Carrier--
(1) Do I insert my Australian SIM card into my brand new phone BEFORE it is turned on for the first time and BEFORE I flash the new US firmware?
(2) Or do I turn on my new phone for the first time, and flash the update US firmware BEFORE inserting my Australian SIM?
-regards-
Click to expand...
Click to collapse
1. I don't have a snapdragon version phone.
2. I am not sure whether the US models work in Australia. Best bet is to try putting in a sim card in and see if it works ie: phone, messages etc.
3. Have a read of this, it will give you a brief understanding of firmware names and CSC codes.
Can you post a screen shot of : settings - about phone - software information
All Samsung Galaxy Firmware PDA And CSC Codes List With Detailed Explanation - SamsungSFour.Com
All Samsung Galaxy Firmware PDA And CSC Codes List With Detailed Explanation.
www.samsungsfour.com
4. Download PC app Frija. It will give latest firmware. Download - unszip it - run frija.exe ( downloads speed will be faster than websites )
Model number SM-G973U1 CSC - XAA
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
If you want, you can leave the sim card in to flash firmware
spawnlives said:
1. I don't have a snapdragon version phone.
2. I am not sure whether the US models work in Australia. Best bet is to try putting in a sim card in and see if it works ie: phone, messages etc.
3. Have a read of this, it will give you a brief understanding of firmware names and CSC codes.
Can you post a screen shot of : settings - about phone - software information
All Samsung Galaxy Firmware PDA And CSC Codes List With Detailed Explanation - SamsungSFour.Com
All Samsung Galaxy Firmware PDA And CSC Codes List With Detailed Explanation.
www.samsungsfour.com
4. Download PC app Frija. It will give latest firmware. Download - unszip it - run frija.exe ( downloads speed will be faster than websites )
Model number SM-G973U1 CSC - XAA
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
If you want, you can leave the sim card in to flash firmware
Click to expand...
Click to collapse
OK--thanks again.
Thanks for the model number.
The US phone will work in AU -A lot are sold over here through ebay and other outlets- there should be no problems here.
The seller sent me a message to my questions-''it does not matter when the update is done--before or after the SIM card has been put in'', so,should be no problems here - and you also say it's ok to leave the SIM card in while flashing.
I can't give you a screenshot as I am still waiting for the phone to arrive.
I've been reading the Frija page-looks easy enough for me to do.
Frija will give me the correct and latest firmware(on PC) and then I use Odin to install the firmware into the phone,correct?
kymsheba said:
OK--thanks again.
Thanks for the model number.
The US phone will work in AU -A lot are sold over here through ebay and other outlets- there should be no problems here.
The seller sent me a message to my questions-''it does not matter when the update is done--before or after the SIM card has been put in'', so,should be no problems here - and you also say it's ok to leave the SIM card in while flashing.
I can't give you a screenshot as I am still waiting for the phone to arrive.
I've been reading the Frija page-looks easy enough for me to do.
Frija will give me the correct and latest firmware(on PC) and then I use Odin to install the firmware into the phone,correct?
Click to expand...
Click to collapse
Updating phone can be done with or without sim card.
Just make sure with frija to enter correct model number.
Download firmware, extract firmware ( I use 7zip ) put In Odin.
May still need that screen shot when you get the phone as may have to use patched Odin.
spawnlives said:
Updating phone can be done with or without sim card.
Just make sure with frija to enter correct model number.
Download firmware, extract firmware ( I use 7zip ) put In Odin.
May still need that screen shot when you get the phone as may have to use patched Odin.
Click to expand...
Click to collapse
thanks again for the speedy replies.
I found the following youtube that explains easily how to use Frija and Odin to update the firmware.-
I used the model number you gave me and downloaded the firmware update.
I will double check when I get the phone,incase the number is different.
I have read about the ''patched Odin'', the youtube uses the patched version.
You have bee n very helpful,and this youtube shows how it is done.
I'll get back to you when I get the phone.
-regards
kymsheba said:
thanks again for the speedy replies.
I found the following youtube that explains easily how to use Frija and Odin to update the firmware.-
I used the model number you gave me and downloaded the firmware update.
I will double check when I get the phone,incase the number is different.
I have read about the ''patched Odin'', the youtube uses the patched version.
You have bee n very helpful,and this youtube shows how it is done.
I'll get back to you when I get the phone.
-regards
Click to expand...
Click to collapse
Link to patch Odin and original odin
You can use the latest version.
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
Edit:
May also need drivers for PC
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
spawnlives said:
Link to patch Odin and original odin
You can use the latest version.
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
Edit:
May also need drivers for PC
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Click to expand...
Click to collapse
Sorry for the l-o-n-g delay in getting back to you.
I did receive my S10 -red color, as soon as I opened the shipping box,I knew I had been sent a FAKE.
I didn't have to open the retail package as I knew what to look for(thanks to youtubes about fake Samsungs).
The front and back of the retail box were identical to the fake one in the video.
But the seller also made a big mistake--they sent the wrong model(thanks to someone putting the wrong label on the shipping box at their warehouse) - they sent S10e instead of S10.
Anyway,it was easy getting my money back due to their ebay store return policy.
They know I know it's a fake and they are worried about the feedback I have yet to leave for them.
At this point, I am considering a refurbished S10 ''as new'' from a REPUTABLE online AU seller.
Or a new S20 FE Snapdragon, Australian version (plenty of retail stores have it over here).
What ever I get--I'll make sure it isn't a fake and at least,you've helped me to learn a few things,like going to Samobile to check the right numbers,and,if necessary, use Frija and Odin to update the firmware..
Have a look at these photos, tell me what you think.
I don't use an 10 series maybe never will
All I can suggest, since i'm using my device different to yours.
Check IMEI status ( check online ).
For on lines stores or furbished devices IMEI devices this can be changed. Not generally on US devices
Only a word of caution.
For those who aren't already aware, F700U is the model number of all of the US carrier versions of the Galaxy Z Flip. The F700U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via several tools like SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I pay for a subscription to a site that gets the official releases (usually) before they hit SamFirm/Frija, so that's where my files come from. However, I don't have unlimited bandwidth on the site, and it's also quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single Sx and Note x model - so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit SamFirm/Frija.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware, I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=305567
U1 firmware: https://www.androidfilehost.com/?w=files&flid=305568
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I have lots of threads just like this one for other Samsung flagships, if it interests you.
- My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- My naming method for folders on AFH is: build - bootloader - Android version
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Flashing USERDATA will also wipe data
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in SamFirm/Frija:
ATT = AT&T (not available via SamFirm/Frija)
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
SPR = Sprint
TMB = T-Mobile
USC = US Cellular
VZW = Verizon (available via SamFirm/Frija, but Manual Entry is required - Auto will not work)
XAA = U1 firmware
- the correct procedure for switching from one carrier's firmware to another is:
1. Flash full U1 firmware package including non HOME CSC
2. Upon boot, insert a SIM of the carrier whose firmware you want
3. Watch for the popup that says "reboot to apply new carrier settings" etc, and do it
4. After that restart completes, reboot back to Download mode and flash the full U firmware package, with the USERDATA file of the carrier whose firmware you want
it's already available on samfrew and samfw if needed.
https://www.samfw.com/firmware/SM-F700U1
https://samfrew.com/model/SM-F700U1/region/ATT/
BK said:
it's already available on samfrew and samfw if needed.
https://www.samfw.com/firmware/SM-F700U1
https://samfrew.com/model/SM-F700U1/region/ATT/
Click to expand...
Click to collapse
Or you can use SamFirm and Frija, which are free and don't involve a 3rd party website loaded with ads and Captchas and other crap
iBowToAndroid said:
Or you can use SamFirm and Frija, which are free and don't involve a 3rd party website loaded with ads and Captchas and other crap
Click to expand...
Click to collapse
i use frija and samfirm already , but they only provide latest firmware , not previous firmwares, also samfw is free and not slowed down like sammobile or samfrew.
BK said:
i use frija and samfirm already , but they only provide latest firmware , not previous firmwares, also samfw is free and not slowed down like sammobile or samfrew.
Click to expand...
Click to collapse
Yes, but like Mega, it downloads the file into RAM first, before converting it to storage space. So anyone with a PC that has less than 8 GB of RAM can't really use that site
Can I flash u1 on att flip and use on Verizon
bbvirtuoso said:
Can I flash u1 on att flip and use on Verizon
Click to expand...
Click to collapse
No idea - you'll have to try it and see. Make sure it's SIM unlocked first
So if I have the unlocked version, I can flash the ATT userdata and get VoLTE with my ATT SIM?
Tikerz said:
So if I have the unlocked version, I can flash the ATT userdata and get VoLTE with my ATT SIM?
Click to expand...
Click to collapse
No, not necessarily. You'll have to try it and see
Tikerz said:
So if I have the unlocked version, I can flash the ATT userdata and get VoLTE with my ATT SIM?
Click to expand...
Click to collapse
Did this ever work?
Bootloader 2 updates are rolling out - both Sprint and AT&T are both getting build TG1. It's already up on SamFirm and Frija for Sprint, and I'll add the AT&T USERDATA as soon as I get it.
To add another option, I'm also adding all of the files for the last bootloader 1 update - TF1 - and its AT&T USERDATA. Those files are now uploaded to the OP links
Do you by any chance have an ETA as to when you can get the AT&T TG1 USERDATA?
MattPaku said:
Do you by any chance have an ETA as to when you can get the AT&T TG1 USERDATA?
Click to expand...
Click to collapse
No
Hi guys, I got a F700U/DS Z Flip, but I figured out that the national model that is being sold back at my country is the F700F, I wanna use my country's Samsung Pay cards, so does anyone know if it's safe to flash the F700F Firmware on a F700U/DS ?
fercervantes said:
Hi guys, I got a F700U/DS Z Flip, but I figured out that the national model that is being sold back at my country is the F700F, I wanna use my country's Samsung Pay cards, so does anyone know if it's safe to flash the F700F Firmware on a F700U/DS ?
Click to expand...
Click to collapse
It's not possible to cross-flash those 2 models
bbvirtuoso said:
Can I flash u1 on att flip and use on Verizon
Click to expand...
Click to collapse
iBowToAndroid said:
No idea - you'll have to try it and see. Make sure it's SIM unlocked first
Click to expand...
Click to collapse
Tikerz said:
So if I have the unlocked version, I can flash the ATT userdata and get VoLTE with my ATT SIM?
Click to expand...
Click to collapse
Stuart R said:
Did this ever work?
Click to expand...
Click to collapse
Thanks to everyone in this thread for pointing me in the right direction.
I wanted to drop by and say I was risky/dumb enough to try converting the phone from the AT&T branded firmware to the Samsung unlocked/unbranded firmware and I was successful.
The reason I did this was because I had terrible service with Verizon on the at&t firmware. I tried everything. The phone refused to detect band 13, Verizon main band despite it being the strongest at my house (I know from other devices). The AT&T firmware solely connected to band 66.
Anyway, I used patched Odin to flash the unbranded (SM-F700U1, Region XXA). It booted up without the AT&T branding, rebooted once it sensed my Verizon sim, has no AT&T bloat, and connects to all of Verizon bands.
Service is great now. And the unbranded firmware is so much snappier somehow.
Anyway, thanks again yall. Hope this helps someone..
@SilentAce07 This is perfect! Thanks for updating us. I want to use an unlocked Z-Flip, originally with AT&T, on T-Mobile. I don't want to deal with all the AT&T Bloatware or the chance that it's somehow customized to prefer a certain band over another, etc. I'd rather go generic. So I wanted to flash the U1 firmware onto this U device. Where did you get the firmware from? One person linked to samfw.com/firmware/SM-F700U1 but that doesn't exist (404 not found). I found my way to samfrew.com/model/SM-F700U1/region/XAA/ but I see 2 different ones released July 31st, I don't know if I want the TB or the EU version (F700U1TBU2BTGE vs F700U1UEU2BTGE).
I've used a patched Odin before to convert a Verizon Galaxy S20 Ultra 5G over to Generic and then to T-Mobile, so I'm generally familiar with the procedure, but it was easier to find the U1 firmware for the S20 Ultra 5G than it's been for this Z-Flip/F700.
glitchsys said:
@SilentAce07 This is perfect! Thanks for updating us. I want to use an unlocked Z-Flip, originally with AT&T, on T-Mobile. I don't want to deal with all the AT&T Bloatware or the chance that it's somehow customized to prefer a certain band over another, etc. I'd rather go generic. So I wanted to flash the U1 firmware onto this U device. Where did you get the firmware from? One person linked to samfw.com/firmware/SM-F700U1 but that doesn't exist (404 not found). I found my way to samfrew.com/model/SM-F700U1/region/XAA/ but I see 2 different ones released July 31st, I don't know if I want the TB or the EU version (F700U1TBU2BTGE vs F700U1UEU2BTGE).
I've used a patched Odin before to convert a Verizon Galaxy S20 Ultra 5G over to Generic and then to T-Mobile, so I'm generally familiar with the procedure, but it was easier to find the U1 firmware for the S20 Ultra 5G than it's been for this Z-Flip/F700.
Click to expand...
Click to collapse
The OP tells you exactly where you can get the firmware from
iBowToAndroid said:
The OP tells you exactly where you can get the firmware from
Click to expand...
Click to collapse
Hi iBowToAndroid, I've got nothing but mad respect for you and your posts. One of your other posts seriously helped me get my Galaxy S20 Ultra 5G unbranded. This is a great service you do for us and it's much appreciated. With the Galaxy S20 Ultra 5G though you were kind enough to upload the generic U1 firmware to AndroidFileHost as well, so I was able to get the firmware for that one from AFH. But I understand that for this phone (Z-Flip / F700) you chose to just upload the AT&T specific version since AT&T doesn't allow their firmware on other websites, again, much appreciated. But this left me searching for where to get the U1/XAA generic unbranded firmware. Your first post mentioned Frija and SamFirm...
1. I tried to use Frija but I've searched for Model SM-F700 / SM-F700U /SM-F700U1 / F700 / F700U / F700U1 with the CSC of XAA and each and everytime I got the error "Error 102: Unable to find firmware for ..."
Maybe you could help point Frija users to exactly what to put in for Model and CSC? Just let us know what to search for / input into Frija and we could use that.
2. You also mentioned SamFirm also has it. But a quick google search for SamFirm brings you to https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 and the very first thing you see is "This tool is deprecated. Please use fw.updato.com" so it seems like SamFirm is no longer being supported, but I went to the website fw.updato.com as mentioned and the only phone they have is the SM-F700F (international version). They don't have the SM-F700U or U1 that I could see.
So I was at a loss where to get the U1 firmware.
---
Then the first has a link to: www.samfw.com/firmware/SM-F700U1 but that results in a 404 not found. So samfw seemed to be a bust.
The first comment also has a link the (samfrew) website: samfrew.com/model/SM-F700U1/region/ATT/ which is confusing because it has "U1" but also ATT; I thought U was for AT&T (and other US carriers) and U1 was generic. But either way, I found my way to samfrew.com/model/SM-F700U1/region/XAA/ which is consistent with your first post about using U1 and XAA in conjunction for generic. Great! But then I didn't know the difference between F700U1TBU2BTGE vs F700U1UEU2BTGE both have the same date. So that's why I posted here, trying to get some clarification on just which one to download.
HOWEVER, to help others, I found on sammobile that I could select the U1 firmware, and odd enough I could select "USA (T-Mobile) (TMB)" as the country, which again confuses me because U1 is supposed to be generic, not carrier specific; and it's more odd because there is no T-Mobile version of this phone. But I noticed sammobile then poinmted me towards "F700U1UEU2BTGE" (UE firmware) so that kind of helped make my decision for me. I chose to download F700U1UEU2BTGE from samfrew.com and I flashed it with a patched Odin and it took. The phone booted up, generic, and seems to work just fine. No AT&T or any other carrier, bloatware.
tldr; So for future people searching, if you want to change it from an AT&T branded/specific model to something Generic, go to the website samfrew.com/model/SM-F700U1/region/XAA/ and grab the latest UE image.
---
Again, no disrespect intended iBowToAndroid, I absolutely did my leg work before posting. I tried my very best to find it elsewhere and through various searches. I wasn't just lazy and immediately asking for help like some others tend to do.
glitchsys said:
Hi iBowToAndroid, I've got nothing but mad respect for you and your posts. One of your other posts seriously helped me get my Galaxy S20 Ultra 5G unbranded. This is a great service you do for us and it's much appreciated. With the Galaxy S20 Ultra 5G though you were kind enough to upload the generic U1 firmware to AndroidFileHost as well, so I was able to get the firmware for that one from AFH. But I understand that for this phone (Z-Flip / F700) you chose to just upload the AT&T specific version since AT&T doesn't allow their firmware on other websites, again, much appreciated. But this left me searching for where to get the U1/XAA generic unbranded firmware. Your first post mentioned Frija and SamFirm...
Click to expand...
Click to collapse
SamFirm and Frija both still work perfectly fine, and both pull F700U1 firmware perfectly fine. Literally just verified it on my own computer
Hi everyone,
My S21 is full stock and I would like to keep this way. My problem is that I do not have any Wifi and my mobile operator is blocking updates download. I have no solution to download OTA updates except hunting for a free wifi hotspot..
Is there any way to install these updates manually? Without making any factory reset?
Thanks!
Here's a site with firmware, search your model
There's other sites that might work better, just search Google for Samsung (model number) firmware.
Samsung Galaxy S21 5G Firmware Download SM-G991U Free Download
Samsung Galaxy S21 5G Firmware Download SM-G991U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
I use the may 2022 version cvdb for my phone because they got rid of options to change bands after that.
You can do whatever you want though.
How to update to the latest Software via Odin - also for flashing/unbricking any firmware
How to update to the latest Software via Odin - also for flashing/unbricking any firmware
Hello everyone! I made a tutorial regarding flashing the latest updates, flashing custom ROMs or unbricking your device: Video guide: Steps: 1. Download and extract both Frija and Odin. 2. Launch Frija. 3. Check the "Auto" button. Write your...
forum.xda-developers.com
robnitro said:
Here's a site with firmware, search your model
There's other sites that might work better, just search Google for Samsung (model number) firmware.
Samsung Galaxy S21 5G Firmware Download SM-G991U Free Download
Samsung Galaxy S21 5G Firmware Download SM-G991U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
I use the may 2022 version cvdb for my phone because they got rid of options to change bands after that.
You can do whatever you want though.
How to update to the latest Software via Odin - also for flashing/unbricking any firmware
How to update to the latest Software via Odin - also for flashing/unbricking any firmware
Hello everyone! I made a tutorial regarding flashing the latest updates, flashing custom ROMs or unbricking your device: Video guide: Steps: 1. Download and extract both Frija and Odin. 2. Launch Frija. 3. Check the "Auto" button. Write your...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you for the time that you take to answer me. I am late of 4 updates, is it ok to flash directly the last one or should I flash all of them one after an other? Thank you.
abdAlmuqtadir said:
Thank you for the time that you take to answer me. I am late of 4 updates, is it ok to flash directly the last one or should I flash all of them one after an other? Thank you.
Click to expand...
Click to collapse
You can flash direct.
To keep data flash home-csc not the csc_ one.
I would still backup before doing it, you never know what will happen.
If you're super worried try one version at a time, but you end up downloading a lot and waiting a lot.
Also with locked bootloader, to know in advance, the number in the last 4 or 5 letters is the bootloader version.
( G991USQU5EWAI for example)
In my case "u5" means i can only flash 5 or above.
If you see a new one with 6, as soon as you flash that, you can't flash 5 or 4 anymore.
I stick with May 2022 update cvdb because it lets me charge bands if I'm in an area with bad signal and I can disable 5g to save battery.