Related
For the beginnings of this thread read posts 838-844 here.
alain57 said:
I did the modification on cucuo92 rom
i went back to CM12.1 and noticed that TWRP restaure an NV partition... So i first told TWRP to NOT restaure this partition => phone did not boot
So i had no choice and restaured this partition after all
well I went to a town where there is ONLY LTE 800Mhz, and like I expected did not work :/
So I guess that the NV partition backup in TWRP contains the NV changes :/
Nevertheless, i'll retry this with Cucuo92 rom to be sure that this mod is working on my phone
if it is, i will create a NV backup and try to compare it with the backup I already have (cucuo rom without changes)
and then I'll try to do the exact same difference on the CM12.1 NV backup... maybe this could work
you need to use another tool to do the LTE mod, the window you are showing is the one for UMTS (3G) modification
this window need to stay open, but the LTE mod are done in one other tool
Click to expand...
Click to collapse
So I was reading a little deeper in the thread and a few interesting things came out to me.
CM is known (as of last September) to have added a commit to their code to prevent these changes (my guess is because of their rapid growth and wanting to play with the big manufacturers), so CM12 or CM12.1 may not successfully do this.
It seems that this only works with custom ROM's/kernels that have been compiled from source (meaning Cuoco's ROM is built off of Nubia and they likely are preventing it in the kernel)
It seems the phone has the correct modem to make this happen, but we may also need a custom radio compiled to enable these bands to work - although it seems some people in the other thread have had issues with this. Some say it works and others not so much.
There's more but I don't have time at the moment. I'll try and add more later.
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Exact I stay under Cuoco 2.51 because I love this rom, but maybe the guide work with CM...
Here, again the link of the guide : http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
This is true, they may not. It was only a presumption on my part. They have been so reluctant (okay, flat out refusing to do so) to release the source code and device tree, it wouldn't surprise me that they have this, I just don't know. Nubia/ZTE really seems like they don't care about anyone outside of China.
LePocketPc said:
Exact I stay under Cuoco 2.51 because I love this rom, but maybe the guide work with CM...
Here, again the link of the guide : http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Click to expand...
Click to collapse
From what I understand from reading many of the replies in the guide, people have had a hard time making it work with CM. They have to use a different ROM.
well fo me, i enabled band 3, 7 and 20 only with the code number : 524356
I then went to a town where to only LTE is on band 20 (800Mhz) (i checked this on a french 4G => http://www.reseau4g.info/couverture-4g-orange)
and ....
NOT WORKING only 3G (too good to be true)
good part about this : i now has no reason to stay on that ****ty nubia based rom, can switch back to CM12.1
Are you sure you have activates 4G in settings > Msim Settings > Mobile Network > Phone Card One or Two ( Where is your Orange sim card ) > 4G mode, enable LTE 4G networks
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
alain57 said:
well fo me, i enabled band 3, 7 and 20 only with the code number : 524356
I then went to a town where to only LTE is on band 20 (800Mhz) (i checked this on a french 4G => http://www.reseau4g.info/couverture-4g-orange)
and ....
NOT WORKING only 3G (too good to be true)
good part about this : i now has no reason to stay on that ****ty nubia based rom, can switch back to CM12.1
Click to expand...
Click to collapse
LePocketPc said:
Are you sure you have activates 4G in settings > Msim Settings > Mobile Network > Phone Card One or Two ( Where is your Orange sim card ) > 4G mode, enable LTE 4G networks
Click to expand...
Click to collapse
yes as I have currently 4G in roaming on a 2600Mhz antenna
these are the settings i setup (i also wrote the second line just in case, but this didn't help :/)
and like I said, i'm currently in 4G but on a 2600Mhz antenna somewhere else
---------- Post added at 11:19 AM ---------- Previous post was at 10:47 AM ----------
at least i can confirm that disabling a band really disable it
i just setup my phone to ONLY accept band 20, rebooted it and no more 4G at the place I am (with 4G 2600Mhz)
I guess that some manufacturer disable some bands by software (and in this case, this mod works)
and some other may actually have some hardware limitations (maybe the LTE radio can't find signals bellow 1000mhz ?
nevertheless, i will do a last test by activation all 800Mhz bands (and for course the 3 an 7 bands)
so it will be bands :
3 6 7 18 19 20 27
for code i received 68026468
I'll test this this afternoon... and update the post after getting some results
edit : i went eating in the other nearby town (800Mhz) and no 4G
so this modification is useless :/
Okay, so it seems that we've had someone on Cuoco and on Nubia test this out without success. Next we need someone with one of the versions of CM to see if it works. I'm on CM12.1 and would try, but I don't have a PC; only Mac and Linux and I'm not sure how to make this work with either one.
Well for cm12 we first need to find how to enable the dialog USB.
Cm12 only get adb and mtp or USB mass storage
And noe of the service code worked...
alain57 said:
Well for cm12 we first need to find how to enable the dialog USB.
Click to expand...
Click to collapse
You have it explained here - http://forum.xda-developers.com/showpost.php?p=57561965&postcount=1
You may actually control all the possible USB configs in a similar way.
And it works on a fully booted phone, and not when swiched-off.
intresting thread, i want to buy a z9 mini... there is also no FDD-LTE 20 (800mhz) for being usable in Germany...
anybody tried this? http://forum.xda-developers.com/showpost.php?p=55560160&postcount=148
other question, could it be that the reciever isnt possible to get 800mhz? Then the Software edit would be not useful
Had not seen that specific thread; although, the person who wrote it was a major contributor to the one that had been pointed out earlier. A couple of the people here tried adding band 20 (in France I think) and it didn't work. From what I understand, the qualcomm modem should work without a problem, it's the radio that may be the issue. From what I've read elsewhere, if the phone is being used for bands 38-41 in China, the antenna should be suitable for the other bands people are looking into activating on the phone.
Pr3muToS said:
intresting thread, i want to buy a z9 mini... there is also no FDD-LTE 20 (800mhz) for being usable in Germany...
anybody tried this? http://forum.xda-developers.com/showpost.php?p=55560160&postcount=148
other question, could it be that the reciever isnt possible to get 800mhz? Then the Software edit would be not useful
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=57012928&postcount=547
doesnt it have also 38-41??
Pr3muToS said:
http://forum.xda-developers.com/showpost.php?p=57012928&postcount=547
doesnt it have also 38-41??
Click to expand...
Click to collapse
Yes, it does, but those bands aren't available in all countries. Those are TDD bands primarily used in Asian countries (thought there are others too).
yes , but you said:
if the phone is being used for bands 38-41 in China, the antenna should be suitable for the other bands people are looking into activating on the phone.
Click to expand...
Click to collapse
but the OPO hast 38-41 and the FDD20 didnt work, see my last link
thats y iam asking.... depends on antenna, or software? Because Qualcomm Tool should be able to active FDD 20 on Qualcomm based phones.. but if the antenna doesnt support, this all is useless, thats the question now?? mhm
https://www.qualcomm.com/products/snapdragon/modems
this is also very intressting... the LTE modem is buidl in @ processor , so it shoudl be able to add all LTE bands...
but now there is also the question if the antenna is a impotant thing or not?
for exmaple on the Nubia z9 mini, there is snapdragon 615, which is alos build in htc desire 820, Oppo R5 , Coolpad F2 LTE, Samsung Galaxy A7, ZTE Blade S6
only F2 and blade s6 dont support the 800mhz LTE band, the other 3 do...
br
edit: i see the s6 also has b20 support now
http://www.comebuy.com/brandpage/specification.html
The B20 band is possible or not on Z7 mini ?
I'm sorry but i don't have the capacities to test it.
But actually the procedure for SOC qualcomm don't work for our device ?
Pr3muToS said:
https://www.qualcomm.com/products/snapdragon/modems
this is also very intressting... the LTE modem is buidl in @ processor , so it shoudl be able to add all LTE bands...
but now there is also the question if the antenna is a impotant thing or not?
for exmaple on the Nubia z9 mini, there is snapdragon 615, which is alos build in htc desire 820, Oppo R5 , Coolpad F2 LTE, Samsung Galaxy A7, ZTE Blade S6
only F2 and blade s6 dont support the 800mhz LTE band, the other 3 do...
br
edit: i see the s6 also has b20 support now
http://www.comebuy.com/brandpage/specification.html
Click to expand...
Click to collapse
hello
Hi everyone, I am trying to enable some lte bands.
I can not make service programming to read my phone. is it totally necessary? becasue qspt and qxdm are reading my phone.
I wrote with qxdm 65609 for bands 1, 4 17 (by the way, is this code alright?) but I can not get 4g to work. Any idea?
I am using quoco's rom
Thanks
LTE band 20 800MHz FDD
Hi did anyone successfull add band 20? Is it working? Can someone help me please? btw have cuocos rom
Hey,
Im about to buy a RN3..i want the 32gb !INTERNATIONAL EDITION! with enabled LTE Band 20.
From what i read it is called Katie right?
My question is:
Am I able to install all the Kenzo roms to it because the partition size differs?
Its a biggie for me so I want to know b4 I buy.
Thank you guys
cheers
No, I think it will brick. However, there exists ports from Kate to Kenzo so after a bit of work, we should see CM13 for Kate, we are not sure yet if B20 can work with Kenzo
B20 will never work in Kenzo... And modem from Kate cannot be ported...
Thanks guys. already thought that....I dont necesarrily need B20 so I'll Irder the Kenzo one with 32 gb. Im looking forward to get it! I think price/performance wise its the best phone you can get
And yea its such a beauty! :3
Hi u can use this method http://forum.xda-developers.com/mi-5/how-to/progress-trying-to-unlock-bands-t3337476
Sent from my Redmi Note 3 using Tapatalk
Double post
darksky-id said:
Hi u can use this method http://forum.xda-developers.com/mi-5/how-to/progress-trying-to-unlock-bands-t3337476
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
I thought our Antennas are just not capable of being able to work on B20
U tried it or someone can confirm this? I would love to do that
yea..I just read:
Quote:
Inside the Mi5 you will also find the skyworks 77646 power amplifier module and listed under it's 4G features is: LTE supports output power bandwidth bands 1, 25, 3, 4, 39, 26, 8, 20, 12, 17 (and sub-bands 9, 10, 18, 19)
we got another power amp sadly
Can we get root on tge kate model?
Recently I ordered the RN3 but they sent the MTK one instead, thankfully the seller was happy to send me a replacement, now I got my replacement I am confused to what version of the SD650 ones it is, the MIUI build is "android 6.0.1 Global stable 7.3.7.0(MHRMIDE)" (I have the option to update to 7.5.2.0 MHRMIDE) which according to the official list is the special edition one, can I unlock the bootloader with the normal method and what's the difference I should keep in mind if I want to change the Rom?...
Abd121 said:
Recently I ordered the RN3 but they sent the MTK one instead, thankfully the seller was happy to send me a replacement, now I got my replacement I am confused to what version of the SD650 ones it is, the MIUI build is "android 6.0.1 Global stable 7.3.7.0(MHRMIDE)" (I have the option to update to 7.5.2.0 MHRMIDE) which according to the official list is the special edition one, can I unlock the bootloader with the normal method and what's the difference I should keep in mind if I want to change the Rom?...
Click to expand...
Click to collapse
Seriously dude, just have a look at the Guides section
c_/\/\_k said:
Seriously dude, just have a look at the Guides section
Click to expand...
Click to collapse
my post is merely to confirm whether my phone is indeed the "special edition (Kate)" or not, I can figure out what to do after that!...
Going by the information provided it certainly looks like the "Kate" model!
Check the dimensions of the device.
Special edition : Dimensions: 152.5 × 76 × 8.65 mm
All others : Dimensions: 149.98 × 75.96 × 8.75 mm
Limited custom rom support for it. No xiaomi.eu for example!
corkiejp said:
Going by the information provided it certainly looks like the "Kate" model!
Check the dimensions of the device.
Special edition : Dimensions: 152.5 × 76 × 8.65 mm
All others : Dimensions: 149.98 × 75.96 × 8.75 mm
Limited custom rom support for it. No xiaomi.eu for example!
Click to expand...
Click to collapse
it does say it supports FDD-LTE , it's definitely Kate then...should've look it up beforehand!
Abd121 said:
it does say it supports FDD-LTE , it's definitely Kate then...should've look it up beforehand!
Click to expand...
Click to collapse
All the models have FDD-LTE, but "Kate" has B20 & B28 as well!
https://www.reddit.com/r/Xiaomi/wiki/specs/note3
Abd121 said:
my post is merely to confirm whether my phone is indeed the "special edition (Kate)" or not, I can figure out what to do after that!...
Click to expand...
Click to collapse
its definately not kenzo dude.. that rom doesnt comes with kenzo. and yes it does not have development like kenzo ones, i think you should go for another replacement.. from where did you did you ordered it..? did specifically oredered the special edition..?
Another way to find out your model is this fastboot command!
Code:
fastboot getvar product
Since I'm kind of disliking EMUI but love FlymeOS, I'm planning to flash the latter on my phone. I'm downloading the latest version from the official site, flymeos(dot)com.
However, it is listed under Honor 5X, and described as compatible with KIW-L24 / L22 / L21, KII-L23 / L22 / L2 (no mention of KII-L05).
I did some research and KII-L22 / 23 seem practically identical to the L05, in fact certain sites do not even bother to make a distinction between them when describing the specs.
So, can I safely flash this version of Flyme on my device?
Thanks in advance.
mrfreeman15 said:
Since I'm kind of disliking EMUI but love FlymeOS, I'm planning to flash the latter on my phone. I'm downloading the latest version from the official site, flymeos(dot)com.
However, it is listed under Honor 5X, and described as compatible with KIW-L24 / L22 / L21, KII-L23 / L22 / L2 (no mention of KII-L05).
I did some research and KII-L22 / 23 seem practically identical to the L05, in fact certain sites do not even bother to make a distinction between them when describing the specs.
So, can I safely flash this version of Flyme on my device?
Thanks in advance.
Click to expand...
Click to collapse
If you are on Volte firmware your have to downgrade to non volte firmware before going to custom rom..
I think it for all honor 5x..
Give it a try but do not forget to make full backup before flashing rom.
Hey, thank you for your answer!
hassanjavaid8181 said:
If you are on Volte firmware your have to downgrade to non volte firmware before going to custom rom..
I think it for all honor 5x..
Give it a try but do not forget to make full backup before flashing rom.
Click to expand...
Click to collapse
So I gave it a try and got error 7. Maybe it really isn't compatible after all?
Btw here is something else I noticed on their forum page: "The rom is based on android6.0 and it is necessary to flash the based rom", and they provide a link to this based rom, it's for an Indian version of the Honor 5X KIW-L22. I'm quite wary of flashing it though (again, due to the difference in device version). Do you think that it would be absolutely necessary?
In the meantime, I successfully flashed LineageOS. Actually really liking it so far, might as well just keep that if I can get everything to work the way I want.
mrfreeman15 said:
Hey, thank you for your answer!
So I gave it a try and got error 7. Maybe it really isn't compatible after all?
Btw here is something else I noticed on their forum page: "The rom is based on android6.0 and it is necessary to flash the based rom", and they provide a link to this based rom, it's for an Indian version of the Honor 5X KIW-L22. I'm quite wary of flashing it though (again, due to the difference in device version). Do you think that it would be absolutely necessary?
In the meantime, I successfully flashed LineageOS. Actually really liking it so far, might as well just keep that if I can get everything to work the way I want.
Click to expand...
Click to collapse
I don't understand. If you have lineage os running, you shouldn't have problems installing flyme.
gopinaidu77 said:
I don't understand. If you have lineage os running, you shouldn't have problems installing flyme.
Click to expand...
Click to collapse
It's the very first time I encounter error 7 so I don't know, but it is what it is.
Either way, I set up Lineage to my liking and everything seems to work, so at this point the only purpose of flashing Flyme would be aesthetics, though I doubt it's worth the risk and the time. So I'll mark the thread as solved.
mrfreeman15 said:
It's the very first time I encounter error 7 so I don't know, but it is what it is.
Either way, I set up Lineage to my liking and everything seems to work, so at this point the only purpose of flashing Flyme would be aesthetics, though I doubt it's worth the risk and the time. So I'll mark the thread as solved.
Click to expand...
Click to collapse
To solve error 7 for flyme..
After wiping restart twrp and then flash rom.zip again it will flash
Can I use this rom even im in Philippines? Because my phone dont have cellular signal so I decided to find it's stock rom. TIA
joaquinorrica said:
Can I use this rom even im in Philippines? Because my phone dont have cellular signal so I decided to find it's stock rom. TIA
Click to expand...
Click to collapse
Hi there,
First of all, when you say "this rom", which one are you referring to, Flyme, Lineage? They are NOT stock roms for Huawei/Honor devices. The stock for Huawei is EMUI.
I don't know what model number the Philippinean version of the Honor 5X has, but im pretty sure Lineage for kiwi (Honor 5X codename) is universal across device versions. As for Flyme, it installed fine (eventually) on my Canadian version of the phone without being inteded for it, but it was incredibly buggy and unstable, absolutely unusable for daily tasks.
If you feel you must flash a custom rom, go with Resurrection Remix. Don't touch Lineage with a 10 foot pole (I know I wrote above that I was loving it, but shortly after that I discovered a serious bug in it, basically the thing did something to my SD card making it act as if it was ejected after each reboot, I had to reformat it to get it to work properly again). RR has an interface nearly identical to Lineage, but vastly more options and the SD bug isn't there.
However, from personal experience with two different devices, my advice is to avoid custom roms altogether and always stick with the stock. Even the best custom roms like RR are still less optimized for any given device and therefore will function worse than even the crappiest stock rom, such as Honor 5X's EMUI. Since I wrote my original post I tested over 10 different roms, settling eventually for RR but then was not able to stand using even that for longer than a month. The problems were mostly minor annoyances, but when they all added up it drove me crazy.
You say that your phone doesn't have cellular signal, what happened that made it lose it? Depending on what the problem is, it may not even be correctable by flashing a different rom.
joaquinorrica said:
Can I use this rom even im in Philippines? Because my phone dont have cellular signal so I decided to find it's stock rom. TIA
Click to expand...
Click to collapse
mrfreeman15 said:
You say that your phone doesn't have cellular signal, what happened that made it lose it? Depending on what the problem is, it may not even be correctable by flashing a different rom.
Click to expand...
Click to collapse
The majority of roms don't cover all the mobile frequencies. I use the KII-L22 in Australia and have the same problem.
I'm still to find a rom that has the mobile frequency B8 included.
meekspace said:
The majority of roms don't cover all the mobile frequencies. I use the KII-L22 in Australia and have the same problem.
I'm still to find a rom that has the mobile frequency B8 included.
Click to expand...
Click to collapse
Really? For me if there was one problem that I never got with any of the roms, it was roms not supporting my frequencies. Lineage, RR, and whatever other ones I've tried. The only exception was this one: https://forum.xda-developers.com/ho...m-honor-5x-flyme-os-lollipop-flyme-5-t3429879
No cellular signal at all was working on it for me though not even on 3G or 2G, so I assume there's a bug of some kind in it.
Currently I'm on this rom: https://forum.xda-developers.com/honor-5x/development/stable-flyme-6-7-5-19r-honor-5x-t3615084
It's quite good for being a custom rom, but it takes A LOT of fiddling to get everything to work properly. It says the rom is for KIW-AL10, but it works just fine on my KII-L05, even though those variants do not normally share the same bands.
mrfreeman15 said:
Really? For me if there was one problem that I never got with any of the roms, it was roms not supporting my frequencies. Lineage, RR, and whatever other ones I've tried. The only exception was this one: https://forum.xda-developers.com/ho...m-honor-5x-flyme-os-lollipop-flyme-5-t3429879
No cellular signal at all was working on it for me though not even on 3G or 2G, so I assume there's a bug of some kind in it.
Currently I'm on this rom: https://forum.xda-developers.com/honor-5x/development/stable-flyme-6-7-5-19r-honor-5x-t3615084
It's quite good for being a custom rom, but it takes A LOT of fiddling to get everything to work properly. It says the rom is for KIW-AL10, but it works just fine on my KII-L05, even though those variants do not normally share the same bands.
Click to expand...
Click to collapse
I do have some mobile reception. Mobile carrier has locked 4G. My carrier uses B8. The roms don't seem to have frequency B8.
I can see why you don't have problems, your model doesn't use B8
meekspace said:
I do have some mobile reception. Mobile carrier has locked 4G. My carrier uses B8. The roms don't seem to have frequency B8.
I can see why you don't have problems, your model doesn't use B8
Click to expand...
Click to collapse
The LTE bands in the KII-L05 are B 2, 4, 5, 7. In the KIW-AL10 they are B 1, 3, 38, 39, 40, 41. As you can see, none of them overlap. Yet all the bands in my KII-L05 work perfectly fine on a rom intended for the KIW-AL10, so your reception issues are not caused by the roms.
All I know is factory rom - full signal strength. Every custom rom I tried - 2 bars
All models KIWI:
KIW-L21/HUAWEI KII-L21 in Europe and Southeast Asia:
FDD: B3/B7/B8/B20/B1
KIW-L22/HUAWEI KII-L22 in Australia and New Zealand, South Pacific, Taiwan, and Thailand:
FDD: B1/B3/B5/B7/B8/B28/B19
TDD: B40
HUAWEI KII-L23 in Latin America:
FDD: B2/B5/B4/B7/B28
KIW-L24 (dual SIM card version customized for the United States):
B2/B4/B5/B12/B17
KII-L33 (single SIM card version customized for Chile):
B2/B5/B4/B7/B28
KII-L05 (single SIM card version customized for Canada):
B2/B5/B4/B7 /B12/B17
---------- Post added at 11:22 AM ---------- Previous post was at 11:17 AM ----------
mrfreeman15 said:
The LTE bands in the KII-L05 are B 2, 4, 5, 7. In the KIW-AL10 they are B 1, 3, 38, 39, 40, 41. As you can see, none of them overlap. Yet all the bands in my KII-L05 work perfectly fine on a rom intended for the KIW-AL10, so your reception issues are not caused by the roms.
Click to expand...
Click to collapse
Optus australia 3G
900MHz (B8)
2100MHz (B1)
meekspace said:
All I know is factory rom - full signal strength. Every custom rom I tried - 2 bars
Click to expand...
Click to collapse
So then why don't you just stick with the stock rom? Honestly, finding a good custom rom where everything would just work is next to impossible. In my experience, at least. Or you can give the rom I'm currently using a try (I linked it in a post above), it may do the trick, you never know (but don't blame me if it breaks your phone ).
mrfreeman15 said:
So then why don't you just stick with the stock rom? Honestly, finding a good custom rom where everything would just work is next to impossible. In my experience, at least. Or you can give the rom I'm currently using a try (I linked it in a post above), it may do the trick, you never know (but don't blame me if it breaks your phone ).
Click to expand...
Click to collapse
Why does anyone use a custom rom? Because stock is usually rubbish.
Thank you for the link to the rom. I will have a look and if I try it, i will let you know how it goes.
Hello everyone I'm new here. I would like to know if someone's working on a custom rom for this phone. I'm new to MIUI and honestly it sucks and it would be good to know if I'm stuck with it for 2 or so years.
WeR2B4U said:
Hello everyone I'm new here. I would like to know if someone's working on a custom rom for this phone. I'm new to MIUI and honestly it sucks and it would be good to know if I'm stuck with it for 2 or so years.
Click to expand...
Click to collapse
Probably no one. I'm skeptical about a custom rom for Renoir since his production was stopped and will be launched with another chipset.
triovi said:
his production was stopped
Click to expand...
Click to collapse
Stopped? Where does this info come from?
triovi said:
and will be launched with another chipset.
Click to expand...
Click to collapse
What chipset? Mediatek dimensity ?
Since QUALCOMM 780 chipset production stopped . Are rumor's the 2 new MI 11 lite 5G NE will appear with 778G chipset with Mona and Lisa name's.
triovi said:
Since QUALCOMM 780 chipset production stopped . Are rumor's the 2 new MI 11 lite 5G NE will appear with 778G chipset with Mona and Lisa name's.
Click to expand...
Click to collapse
Why they stopped production?
Anyways hopes are not all down as you can flash a GSI (generic system image, searchable on google)
And also, galaxy tab original P7500 also have it's production stopped, and now, it gets android 8.0 unofficially
Well i will call it a mi 11 lite lite 5g as it is slightly tuned down.
But from xiaomi's trend most likely it will be called 'mi 11 lite 5G reloaded'
triovi said:
Probably no one. I'm skeptical about a custom rom for Renoir since his production was stopped and will be launched with another chipset.
Click to expand...
Click to collapse
That's unfortunate :/. Maybe it's possible to use GSI ROM for this phone? And if so are there any drawbacks, I heard GSI's are not the most stable
LR7875 said:
Why they stopped production?
Anyways hopes are not all down as you can flash a GSI (generic system image, searchable on google)
And also, galaxy tab original P7500 also have it's production stopped, and now, it gets android 8.0 unofficially
Click to expand...
Click to collapse
Unofficially to make room for Snapdragon 888 on production lines. Because is used in many phones and is very requested , 780 was used only in Mi 11 lite.
I'm saying that since number of sell Renoir is low, the possibly of a custom developer to have it is low . I hope I'm wrong since i have this phone.
No man, you're right, we'll be stuck in the vacuum.
triovi said:
Unofficially to make room for Snapdragon 888 on production lines. Because is used in many phones and is very requested , 780 was used only in Mi 11 lite.
I'm saying that since number of sell Renoir is low, the possibly of a custom developer to have it is low . I hope I'm wrong since i have this phone.
Click to expand...
Click to collapse
Is there released kernel sources?
If yes then if someone decided hey I want to donate my phone to a dev then we may get custom ROMs. We may also get blind- builded
custom ROMs.
If no sources, we won't get custom ROMs, same as the 20 dollar mediatek cheap phones.
Damnit, I bought this Xiaomi phone in the hope there will be a custom rom. My Redmi 5 got excellent rom support. But reading that sales are low and to make room for other Snapdragon soc's makes me not optimistic.
My Galaxy A50 that I used for 2 years also got no rom support, but that was mainly because the security in Knoxx. I got used to that.
The Lite 11 4G version of this phone have a few custom roms! Why the 5G not?!!
GSI is enough nowadays. I added patch to phh-treble and works good
LR7875 said:
Is there released kernel sources?
If yes then if someone decided hey I want to donate my phone to a dev then we may get custom ROMs. We may also get blind- builded
custom ROMs.
If no sources, we won't get custom ROMs, same as the 20 dollar mediatek cheap phones.
Click to expand...
Click to collapse
The Telegram published an unofficial ROM Arrow (not GSI) https://t.me/XiaomiMi11LiteUpdates/143 . https://t.me/arrowrenoir
Dobrozol said:
The Telegram published an unofficial ROM Arrow (not GSI) https://t.me/XiaomiMi11LiteUpdates/143 . https://t.me/arrowrenoir
Click to expand...
Click to collapse
That's for the 4g version of the phone. It's totally incompatible with the 5g version.
kestrelv2 said:
That's for the 4g version of the phone. It's totally incompatible with the 5g version.
Click to expand...
Click to collapse
No, links in the telegram channel lead exactly to the firmware for renoir
jazzh said:
Stopped? Where does this info come from?
Click to expand...
Click to collapse
Over a month before you asked this many news sites had posted about the chip shortage, why 780G phones are so rare and why manufacturers like Xiaomi are going to circumvent the problem by switching to 778G.
Xiaomi will release the new Mi 11 Lite NE 5G tomorrow, using the 778G produced by TSMC using N6 unlike the 780G which is produced by Samsung using 5LPE.