Can anyone point me in the right direction, to disable the high volume warning, where it automatically lowers the volume when watching YouTube or listening to music through aux or earbuds? Thank you
caddermeran said:
Can anyone point me in the right direction, to disable the high volume warning, where it automatically lowers the volume when watching YouTube or listening to music through aux or earbuds? Thank you
Click to expand...
Click to collapse
If you are rooted, flash Xposed Framework, then install G4 TweaksBox (works on V10 fro most of the settings). THis has audio and many other tweaks. GravityBOX MM also can do similar things. (I use both to tweak multiple things, but have to be careful as not to set mods that can cause conflicts)
If no root, I don't think there is anything you can do.
Related
I spend most my time in a library with in-ear headphones and the lowest volume is just too loud for me. Is there any way to change the volume rocker's (or slider's) increments?
I'm using Vegan 5.1.1
Sorry Hachi, I dont have an answer for you.
But I am bumping this post up because I have the same problem.
Also took 5 minutes of searching to find this post.
Has anyone found a solution to this yet?
Thanks
Tnt Lite. I had vegan before and lowest setting is still loud. Tnt Lite works. Just do a backup first and try TNT
I would also like to know if there is a solution for this. I am currently running VEGAN 5.1 and when I listen to music only the first half of the media volume does anything. From half to full I dont really notice a difference. I would like to be able to properly spread it out so when I turn it up the max volume on the screen is also the max volume of the device.
I am using TNT Lite 4.4 and noticed the volume is very low until the last setting, not a linear curve.
try using Quick Settings from the market. it allows you to tweak the volume a whole lot more than the stock settings menu.
fidju said:
try using Quick Settings from the market. it allows you to tweak the volume a whole lot more than the stock settings menu.
Click to expand...
Click to collapse
This does help with system level volume items, but as far as media being played even at 1/10 the volume is too loud.
Fortunately using my blue-tooth headphones I have found I can use the in-line volume control to make it a reasonable level. I just don't know what I will do on an airplane.
Can you keep your BT awake while the screen is off?
merril said:
This does help with system level volume items, but as far as media being played even at 1/10 the volume is too loud.
Fortunately using my blue-tooth headphones I have found I can use the in-line volume control to make it a reasonable level. I just don't know what I will do on an airplane.
Click to expand...
Click to collapse
xddy1979 said:
Can you keep your BT awake while the screen is off?
Click to expand...
Click to collapse
Running vegan 5.1
I just tested with locking the screen and had no problems playing music with the stock player, tested for around 12 minutes. After that i set my sleep to 2 minutes, started a song and walked away with the screen still on. The screen went to sleep but the music kept playing, tested for two songs.
Good question and sorry I don't have an answer, but I'm glad you asked. I've seen huge volume differences in different apps. For example, Angy Birds is too loud for quiet settings even at the lowest volume level while some web sites are too low even at the highest settings.
Try the free poweramp app in the market. Go into the eq settings and adjust output. This solved a volume issue for me
Hi.
Are there music player apps for android that have an option in the settings that allows the application to set the volume level independent
of other music player apps?
The idea is that I want to play music in one audio player at a relatively low volume, while playing an audiobook in a different audio player
at a higher volume level.
So far most of the apps I've tried only seem able to access the main volume level that applies to all apps (like BSPlayer and jetAudio).
greetings and thanks in advance for any suggestions, Niek
Did you try PowerAmp ?
I'm not 100% sure the volume control is independant tho.
ectodroid said:
Did you try PowerAmp ?
I'm not 100% sure the volume control is independant tho.
Click to expand...
Click to collapse
I didn't try poweramp yet, but I'm interested if someone can confirm whether poweramp indeed has an option for this in the
settings that allows the volume of poweramp to be set independent of the main volume.
Maybe I can find out by installing the trial version...
dohduhdah said:
Hi.
Are there music player apps for android that have an option in the settings that allows the application to set the volume level independent
of other music player apps?
The idea is that I want to play music in one audio player at a relatively low volume, while playing an audiobook in a different audio player
at a higher volume level.
So far most of the apps I've tried only seem able to access the main volume level that applies to all apps (like BSPlayer and jetAudio).
greetings and thanks in advance for any suggestions, Niek
Click to expand...
Click to collapse
Given that there are so many volume manager apps, you'd expect there to be at least one that offers the capability to manage
the volume of specific apps, rather than managing the generic 'media volume' that applies to all apps.
http://www.appszoom.com/android_applications/volume+manager
I can testify that you can do this with PowerAmp. In the EQ settings it has a preamp slide, which will allow you to make it louder or quieter independent of system volume.
pazzo02 said:
I can testify that you can do this with PowerAmp. In the EQ settings it has a preamp slide, which will allow you to make it louder or quieter independent of system volume.
Click to expand...
Click to collapse
That is indeed a kind of partial solution. jetAudio also has preamp slider and that significantly reduces the volume relative to the volume level
of other audio apps, but it doesn't seem the perfect solution, compared to actually having a regular volume slider that only applies to a specific app, because I think that would allow the volume to be set even lower than the preamp slider allows.
Still, good to know poweramp also has such a preamp slider. I guess it can also be used in combination with reducing all the EQ settings to get the volume down even lower.
REQUIRES PERSEUS KERNEL 34.2 OR ABOVE
Disclaimer: I am not responsible for any damage this app may cause.
This app is now open sourced and is available at:
https://github.com/EternalMelody/HeadphoneAmpControl
This app allows the user to handily change Headphone Amplifier Levels. Root access is required for file permission changes to the following files:
-"/sys/class/misc/wolfson_control/headphone_left"
-"/sys/class/misc/wolfson_control/headphone_right"
Two launchers can be found in the app drawer. One launches the Control app, another launches an overlay dialog for quick amplification level changes.
App Guide:
-Balance L/R toggle: Toggles amplification level balance between the left and right channels. When checked, disables the right channel seekbar and copies the left channel amplification level value to the right channel.
-Main seekbars: Current amplification level values. The top one is left channel's, bottom one is right channel's. The minimum and maximum values are defined by "Min level" and "Max level".
Control App Guide:
-Min level seekbar: Minimum amplification level that is settable by the main seekbars. Cannot be higher than safety level or max level.
-Max level seekbar: Maximum amplification level that is settable by the main seekbars. Cannot be lower than safety level or min level.
-Toggle service (notification bar shortcut): Enables notification shortcut. Must be checked to enable safety level. Notification only appears when headset is currently plugged in.
-Toggle volume button hack: Automatically sets checked volume type to almost max. The volume buttons can then be used to directly adjust amp levels, depending on context. The seekbar determines amp level jump.
-Hack music volume: Enables volume button hack for music, media, video, and games volume
-Hack voice call volume: Enables volume button hack for voice call volume
-Hack ring volume: Enables volume button hack for call ringtone volume
-Safety level: When headset is plugged in the first time, the current amplification level is compared with the safety level. If current level is higher than the safety level, then the current level is lowered to the safety level.
Development made possible by help of:
-AndreiLux
Ok but...
First time that I'm first
Any explanation about what this mod does? Must be based on stock ROMS or AOSP/AOKP works too?
Re: [APP] HeadphoneAmpControl
Thanks for this, one of the handier features I've missed from the Voodoo days.
Memphis_ said:
First time that I'm first
Any explanation about what this mod does? Must be based on stock ROMS or AOSP/AOKP works too?
Click to expand...
Click to collapse
Check the Perseus kernel thread in original dev.
Perseus only works with Samsung-based ROMs, Andreilux just implemented a new audio engine & this app allows for on the fly headphone amp volume changes, either unified or broken down to left/right channels. Stweaks has the same functionality under the audio tab, but also does every other kernel tweak, & it's slow & janky.
Sent from my GT-N7100 using xda premium
Updated first post and app
Memphis_ said:
First time that I'm first
Any explanation about what this mod does? Must be based on stock ROMS or AOSP/AOKP works too?
Click to expand...
Click to collapse
What onslaught86 said. By the way, I see from your sig that you are using NEAK kernel. Would you mind trying whether or not my app works with that kernel? I'd appreciate it. Thanks.
EternalMelody said:
What onslaught86 said. By the way, I see from your sig that you are using NEAK kernel. Would you mind trying whether or not my app works with that kernel? I'd appreciate it. Thanks.
Click to expand...
Click to collapse
Nevermind, I tested it myself and it doesn't work on NEAK. They have different implementations of Boeffla Sound.
Volume button hack added
I've tried using this, but the problem is that I can't find a way to keep both volume notifications from popping up.
On top of that, each time the volume is changed, the system interprets it as if it were a headphone disconnect, and whatever you are playing stops playing. So either you have to disable that setting in all your apps and take the risk of blaring something if your headphones get unplugged, or just never adjust the volume.
Anyone know how to get around these problems? The first one is just an annoyance, but the second one makes it unusable for someone like me (who constantly adjusts the volume).
I use many headphones, so being able to control hiss would be nice. Perhaps it would be better to use profiles that are user selectable, and then use the digital control to make minor modifications?
anishannayya said:
I've tried using this, but the problem is that I can't find a way to keep both volume notifications from popping up.
On top of that, each time the volume is changed, the system interprets it as if it were a headphone disconnect, and whatever you are playing stops playing. So either you have to disable that setting in all your apps and take the risk of blaring something if your headphones get unplugged, or just never adjust the volume.
Anyone know how to get around these problems? The first one is just an annoyance, but the second one makes it unusable for someone like me (who constantly adjusts the volume).
I use many headphones, so being able to control hiss would be nice. Perhaps it would be better to use profiles that are user selectable, and then use the digital control to make minor modifications?
Click to expand...
Click to collapse
Unfortunately there's no easy way that I know of to get around the first problem with the volume button hack. If this functionality were to be embedded in a ROM then its possible but as an app it can only rely on volume change intents.
I can't reproduce the second problem though.
By the way, in the meantime, you can still use the app without the volume button hack.
Interesting. When ASOP is stable on our phone, I'm going to come back to this. If needed, I can make my own mods to make things work the way I want. Will share if that's the case. Hate manufacturer "features". Like stupid WIndows 8 and all the preinstalled Metro apps.
nice work
Awesome job thanks for all the hard work works great...I wish there something like for Bluetooth headsets for phones call I hate the low volume level on the note 2
Rockin it from my Macknote2
EternalMelody said:
Unfortunately there's no easy way that I know of to get around the first problem with the volume button hack. If this functionality were to be embedded in a ROM then its possible but as an app it can only rely on volume change intents.
I can't reproduce the second problem though.
By the way, in the meantime, you can still use the app without the volume button hack.
Click to expand...
Click to collapse
Hey EternalMelody,
First, thanks very much for this nice app. great job!
Regarding the quoted discussion, any chance that the first problem can be solved via an xposed framework module?
The second one can be reproduced if you use youtube and try to adjust the volume. I think it's because adjusting the volume is causing the headphone amp to jump to the foreground and sends youtube to the background so it automatically pauses.
Thanks, and keep up the good work! :good:
First of all, I wanna say thank you for this nice app
But there's one thing which I don't like.. The sliders for the Balance are too big and the circle is not at the end of the line :/ I managed to get rid of the to big circles with resizing them from 64x64 to 32x32. Now everything's fine(except that they're not at the end of the line, but that is hard to notice anyway. )
Would be great if you could fix that one
Great app, have been using it with Perseus for a long time now and it makes my Note2 the primary music player for me now.
Wonder if you'd consider making the app work with the NEAK kernel for Note 2 as well? I'd do it myself but i haven't a clue how to do it. I want to move away from TW roms and NEAK is the only kernel with Boeffla sound on AOSP as far as I know.
This app is now open sourced and is available at:
https://github.com/EternalMelody/HeadphoneAmpControl
Fix low earpiece volume during calls the easy way. Been looking for a fix and there was nothing, then I started flashing all sorts of sound mods and although they did improve the speakers for sound and music and speakerphone, the sound ftom the earpiece was still too low sometimes even in quiet room (during calls with people with bad microphones).
Finally a there was an easy fix, download an app from the play store called "Volume Controll". It will present you with more elaborate volume controls than the default built in sonys controls. Here just bump your in call volume to 80% and voila, you'll get louder in call earpiece volume without flashing media profiles xml or similar hack. You can also controll the loudnes while in call with volume keys.
Posted just because I found nothing about this and this is an essential smartphone function, almost exchanged my phone for an LG G3 cause of this single issue.
Would you mind posting the Play Store link?
Jackos said:
Would you mind posting the Play Store link?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=netroken.android.persistfree
Here it is, I believe other similar apps can do this. When prompted to upgrade after trial is over just tap outside the dialog box and continur using as normal. I turned off all notifications to hide profile switcher.
I find I can't lower the notification volume and ringtone volume low enough.
Does anyone know how to change the volume steps? I have sound assistant but it only works for media volume...
I'm rooted if it helps and I've tried the AOSP based rom solution of changing the build prop but with no success.
Thanks for any help!
Have you tried "sound assistant" app. It is from Samsung and has function you are looking for.
Chaudhry69 said:
Have you tried "sound assistant" app. It is from Samsung and has function you are looking for.
Click to expand...
Click to collapse
If you check the original post you'll have your answer lol
EmRav said:
If you check the original post you'll have your answer lol
Click to expand...
Click to collapse
Ah my bad, don't know how I missed it. It is possible in two ways:
01- Get a custom kernel with volume modification support. I use a Galaxy S7edge with Surround sound, this makes the sound loud and more immersed but it has a drawback. The low threshold of volume is too high same as yours. I usually have a problem with the in-call earpiece audio which is too loud for me. I use MoroKernel and luckily a recent update brought the feature of MoroSound providing fine control over gains of 2-microphones, earpiece, and main speaker. You can also look for a kernel with such features for your device.
02- Manually modifying the sound configuration files. That is a bit difficult but good research with a bit of experimenting will eventually get you there.
Chaudhry69 said:
Ah my bad, don't know how I missed it. It is possible in two ways:
01- Get a custom kernel with volume modification support. I use a Galaxy S7edge with Surround sound, this makes the sound loud and more immersed but it has a drawback. The low threshold of volume is too high same as yours. I usually have a problem with the in-call earpiece audio which is too loud for me. I use MoroKernel and luckily a recent update brought the feature of MoroSound providing fine control over gains of 2-microphones, earpiece, and main speaker. You can also look for a kernel with such features for your device.
02- Manually modifying the sound configuration files. That is a bit difficult but good research with a bit of experimenting will eventually get you there.
Click to expand...
Click to collapse
Any chance you know how to mod the sound config files on an S21? Unfortunately there are no custom kernels yet for the Exynos version
EmRav said:
Any chance you know how to mod the sound config files on an S21? Unfortunately there are no custom kernels yet for the Exynos version
Click to expand...
Click to collapse
Yes, go to /etc/mixer-gains.xml and edit it. Drawback is your device entire volume range will be affected like for media and stuff. One more way and probably the more practical one just hit me.
Find your ringtone and notification tone from /system/media/audio/ or download them from google and use a software like Audacity or Adobe Audition to reduce their volume.
You reduce your phone's volume to the lowest and match pc's volume with it. Then reduce the audio gain in the software until you feel comfortable with it. Export it and use it.
For anyone interested. My solution ended up being the following, with my end goal being too optimize my audio with Dolby and have the volume still be lower (but optimized) on the phone speaker.
I tried a ton of different apps, a few magisk volume steps modules, ViperFX with Dolby and finally I found a good solution.
Turn off the default Dolby stuff on the phone.
Install Dolby Atmos ZTE A2019 PRO for magisk (google it and find it on GitHub).
Reboot.
Install JamesDSP from ZackPTG5's website.
Reboot.
Install Audio Modification library to use Dolby and JamesDSP at the same time.
Reboot.
Create a custom equalizer in Dolby and try max things out as much as possible with it still sounding great.
Open JamesDSP, go to Speaker, set limiter threshold to -5, go to post gain and set it to -10. Turn on the master switch. Leave everything else unless you want to change any Bluetooth or headphone settings. Hide the persistent JamesDSP notification.
Reboot.
Install Audio Compatibility module with all the recommended settings.
Reboot.
Result, Dolby Atmos handles all the audio, increases the volume, applies optimizations system wide. However because volume steps are tricky to change on this phone we are stuck with the phone speaker volume being too loud even on the lowest setting. JamesDSP lowers the volume to the built-in speakers but we still get the Atmos experience we want. Everything else I assume you want to be louder anyway, like Bluetooth and headphones.
Audio Modification Library makes James and Dolby work together.
Audio Compatibility Patch fixes some issues with certain apps not using the sound mods.
Success! You get Dolby Atmos everywhere, but it doesn't max out the phone speaker volume, but it will still max out everything else. Oh and you can also change whatever other settings you want in JamesDSP.