This is a custom Rom I made for the Samsung Galaxy Tab A 7.0 LTE (SM-T285), which suits my tastes.
If you have suggestions, send me a PM.
UPDATE 09/07/2016
================
A newer version that runs "root" (sepolicy constrained) scripts can be found here:
http://forum.xda-developers.com/android/development/rom-samsung-galaxy-tab-7-0-lte-2016-sm-t3455788
Use the above version instead if you want to experiment with features like apps 2 sdcard.
Modifications:
* Based on LMY47V.T285XXU0APCN
* Stock Boot and Recovery (Not much choice since the bootloader is locked)
* Removed Touchwiz launcher and redundant samsung apps (Hancom office, Kidzone), replaced with Trebuchet
* Enabled r/w to the external SD Card
Installation Instructions:
Odin or Heimdall Required.
--FLASH AT YOUR OWN RISK--
1. Make sure to backup of your data and have a copy of your stock Rom in case something goes wrong.
2. Make sure your device is OEM unlocked. (Enable Developer settings and Enable the OEM unlock settings)
3. Extract ZIP file below and flash the tar.md5 file using ODIN, for details on this kindly look for instructions in the xda site.
4. For Heimdall you can use 7zip to extract the system.img from the tar.md5 and just flash the system.img itself.
Link:
Download from Mega
jaritico said:
thanks, but what does after download zip? recovery mode or download mode? and how got it? this root t285?
Click to expand...
Click to collapse
Thanks, but what does after download zip? recovery mode or download mode? and how got it? this root t285?
Click to expand...
Click to collapse
You have to go to download mode and then use Odin to flash. Unfortunately this does not root the T285.
jedld said:
This is a custom Rom I made for the Samsung Galaxy Tab A 7.0 LTE (SM-T285), which suits my tastes.
If you have suggestions, send me a PM.
Modifications:
* Based on LMY47V.T285XXU0APCN
* Stock Boot and Recovery (Not much choice since the bootloader is locked)
* Removed Touchwiz launcher and redundant samsung apps (Hancom office, Kidzone), replaced with Trebuchet
* Enabled r/w to the external SD Card
Installation Instructions:
Odin or Heimdall Required.
--FLASH AT YOUR OWN RISK--
1. Make sure to backup of your data and have a copy of your stock Rom in case something goes wrong.
2. Make sure your device is OEM unlocked. (Enable Developer settings and Enable the OEM unlock settings)
3. Extract ZIP file below and flash the tar.md5 file using ODIN, for details on this kindly look for instructions in the xda site.
4. For Heimdall you can use 7zip to extract the system.img from the tar.md5 and just flash the system.img itself.
Link:
Download from Mega
Click to expand...
Click to collapse
Says I need the encryption key and if I do not have it to contact the developer ......
TopTongueBarry said:
Says I need the encryption key and if I do not have it to contact the developer ......
Click to expand...
Click to collapse
Sorry, updated links, try again and see if it works.
jedld said:
Sorry, updated links, try again and see if it works.
Click to expand...
Click to collapse
Yes, downloading now. Thanks.
Hi,
Anyone tried Pokemon Go update 0.37 with this ROM? The update fails to start for me. It prompts device/os version is incompatible.
I reverted back to version 0.35 and it works fine.
venomrat said:
Hi,
Anyone tried Pokemon Go update 0.37 with this ROM? The update fails to start for me. It prompts device/os version is incompatible.
I reverted back to version 0.35 and it works fine.
Click to expand...
Click to collapse
Yeah the newest version checks for xposed and a bunch of other things. Actually a lot of people were pissed that they did this. You'd probably need to revert back to stock if you want to play. Only systemless root and xposed with magisk works for Pokemon go now.
jedld said:
Yeah the newest version checks for xposed and a bunch of other things. Actually a lot of people were pissed that they did this. You'd probably need to revert back to stock if you want to play. Only systemless root and xposed with magisk works for Pokemon go now.
Click to expand...
Click to collapse
Also if you want more details on what is going on search google for "pokemon go safetynet". Basically most custom roms and not just this device should fail the test.
jedld said:
This is a custom Rom I made for the Samsung Galaxy Tab A 7.0 LTE (SM-T285), which suits my tastes.
If you have suggestions, send me a PM.
UPDATE 09/07/2016
================
A newer version that runs "root" (sepolicy constrained) scripts can be found here:
http://forum.xda-developers.com/android/development/rom-samsung-galaxy-tab-7-0-lte-2016-sm-t3455788
Use the above version instead if you want to experiment with features like apps 2 sdcard.
Modifications:
* Based on LMY47V.T285XXU0APCN
* Stock Boot and Recovery (Not much choice since the bootloader is locked)
* Removed Touchwiz launcher and redundant samsung apps (Hancom office, Kidzone), replaced with Trebuchet
* Enabled r/w to the external SD Card
Installation Instructions:
Odin or Heimdall Required.
--FLASH AT YOUR OWN RISK--
1. Make sure to backup of your data and have a copy of your stock Rom in case something goes wrong.
2. Make sure your device is OEM unlocked. (Enable Developer settings and Enable the OEM unlock settings)
3. Extract ZIP file below and flash the tar.md5 file using ODIN, for details on this kindly look for instructions in the xda site.
4. For Heimdall you can use 7zip to extract the system.img from the tar.md5 and just flash the system.img itself.
Link:
Download from Mega
Click to expand...
Click to collapse
Hello and thank you for your work with this device. Currently I am looking for a bypass for the factory reset protection on my sm t280. I have flashed the stock md5 file 3+ times attempting to do a complete data wipe and reset, and this doesnt remove the lock. Any ideas?
BadReligion420 said:
Hello and thank you for your work with this device. Currently I am looking for a bypass for the factory reset protection on my sm t280. I have flashed the stock md5 file 3+ times attempting to do a complete data wipe and reset, and this doesnt remove the lock. Any ideas?
Click to expand...
Click to collapse
To FRP unlock you have to go to developer settings and switch oem unlock to false. The stock rom should have it unless you are using a carrier locked version that I a! not aware of.
jedld said:
To FRP unlock you have to go to developer settings and switch oem unlock to false. The stock rom should have it unless you are using a carrier locked version that I a! not aware of.
Click to expand...
Click to collapse
please excuse my ignorance, but am i able to do this with out being able to login? the person i purchased it from doesnt have the original owners gmail and pw.
---------- Post added at 05:59 PM ---------- Previous post was at 05:57 PM ----------
BadReligion420 said:
please excuse my ignorance, but am i able to do this with out being able to login? the person i purchased it from doesnt have the original owners gmail and pw.
Click to expand...
Click to collapse
I just downloaded a stock recovery for a sm t285, and was going to attempt to flash to the 280. havent yet, do you feel that would be a safe thing to attempt? not looking to brick.
BadReligion420 said:
please excuse my ignorance, but am i able to do this with out being able to login? the person i purchased it from doesnt have the original owners gmail and pw.
---------- Post added at 05:59 PM ---------- Previous post was at 05:57 PM ----------
I just downloaded a stock recovery for a sm t285, and was going to attempt to flash to the 280. havent yet, do you feel that would be a safe thing to attempt? not looking to brick.
Click to expand...
Click to collapse
FRP is specifically designed to prevent flashing if you can't login to the device. You won't be able to flash unless the person has turned off oem unlock beforehand. I am not aware of any method to bypass this on this device.
Also the T280 and T285 have slightly different hardware so using a different recovery image is not recommended. Also since both devices have a locked bootloader, I highly doubt you can even change the recoveries from stock as I would imagine samsung using different keys for both. At the worst case it still always possible to reflash them back to stock if you do want to try
AARGH! If I had only waited and not sold my so difficult to get SM-T285M (to TTB)....sheesh never thought there would be this much progress
bang head live and keep learning
mac231us said:
AARGH! If I had only waited and not sold my so difficult to get SM-T285M (to TTB)....sheesh never thought there would be this much progress
bang head live and keep learning
Click to expand...
Click to collapse
And thank you so much for selling it. I don't speak enough Spanish to make the ordeal of getting one of the T285M's from so america worthwhile. I was planning on sticking with my T239M for awhile, then I saw your T285M on ebay.
I've dirty flashed jedld's T285 debloated rom, then dirty flashed his T285 tinker rom on top of that. Both onto my T285M. Working flawlessly. Wished he'd kept the mail app, but without touchwiz I guess that wasn't possible.
Something else they blocked in the kernel or with SElinux on the T285M is screen mirroring. Can only cast directly from apps.
Still I am happy overall. Now looking for a castrated version of daemonsu!
TTB
TopTongueBarry said:
And thank you so much for selling it. I don't speak enough Spanish to make the ordeal of getting one of the T285M's from so america worthwhile. I was planning on sticking with my T239M for awhile, then I saw your T285M on ebay.
I've dirty flashed jedld's T285 debloated rom, then dirty flashed his T285 tinker rom on top of that. Both onto my T285M. Working flawlessly. Wished he'd kept the mail app, but without touchwiz I guess that wasn't possible.
Something else they blocked in the kernel or with SElinux on the T285M is screen mirroring. Can only cast directly from apps.
Still I am happy overall. Now looking for a castrated version of daemonsu!
TTB
Click to expand...
Click to collapse
no need for a castrated version. Full ROOT is available soon now.
http://forum.xda-developers.com/showpost.php?p=68777842&postcount=27
Double Aargh...salt on my wounds ttb
Now my contact in S. America will not even reply to me
Contemplating on getting the Samsung J max 7.0 dual sim...yes no U.S lte but has an 8mp camera and a flash...similar to the T285 otherwise...can't say how many times I needed the flash for photos or even if for looking at labels peering into dim areas behind a monitor or tv..maybe end up in same pickle of no root...will see (number is SM-T285YD so it is based off the T285 it seems-maybe a Latin American version soon?)
Also trying to get the T705M from another source but taking forever...low hopes think it will come through
TopTongueBarry said:
And thank you so much for selling it. I don't speak enough Spanish to make the ordeal of getting one of the T285M's from so america worthwhile. I was planning on sticking with my T239M for awhile, then I saw your T285M on ebay.
I've dirty flashed jedld's T285 debloated rom, then dirty flashed his T285 tinker rom on top of that. Both onto my T285M. Working flawlessly. Wished he'd kept the mail app, but without touchwiz I guess that wasn't possible.
Something else they blocked in the kernel or with SElinux on the T285M is screen mirroring. Can only cast directly from apps.
Still I am happy overall. Now looking for a castrated version of daemonsu!
TTB
Click to expand...
Click to collapse
got another one - white color ...as a gift...God Bless - great device battery life is just incredible - nothing fancy but does its job...keeping this one (had it since early November) gave up on the 705m
Is this ROM compatible with Google Safetynet? I can't seem to log into Pokemon GO since I installed Tinker edition, so I'm thinking to switch to this one instead.
Haven't tried it but it should work.
Is the root part contained in boot.img or in system.img? In other words, when using Heimdall I should flash both system.img and boot.img, isn't it?
I'm getting bootloops with CM13, Omni and I don't know how I got Tinker working, I kind of remember flashing boot.img, then wiping, then flashing system.img, then wiping again.
EDIT: got this one working too by flashing boot.img (Heimdall complains it cannot receive confirmation msg) reboot into download again, then flashing system.img (this time heimdall does reboot the phone). however, pokemon go still wont connect due to google's safetynet compliance.
I'll try flashing recovery in case it is TWRP the one clashing with Safetynet.
PD: I didn't backup stock at the beggining of the process so I'm pretty much screwed with Pokemon until I can afford a new phone. But if someone has a stock ROM for T285MUBU0API2, please ping me.
EDIT2 Got pokemon working. I reinstalled TWRP (this ROM's recovery is the stock one, of course), then flashed unSU. It removed SuperSU binary and Google SafeNet got working again. I can't believe that, after so much hours I've put into finding the best custom ROM for this crappy phone, 95% of the time was spent in trying to get Pokemon GO running. I'm close to 40, FML.
Related
I didn't think this warranted a development thread at this point, Mods may disagree and move it. Since a few people, myself included, need some TouchWiz features and want something closer to a stock rom than Jasmine but debloated, deodexed with the Verizon wifi tether provisioning disabled, I threw this together. I'll try to answer any questions and fix any issues that pop up but I cant make any promises due to work and other projects. If I do move forward with anything I may try to port the stock Verizon Note 4/5, but that's getting ahead of myself.
Now the usual warning about your warranty being voided (as if any Note 3s are under warranty and you didn't void it rooting/flashing recovery) and me not being responsible for you bricking your device because I was stoned when I packaged this.
Download the rom here.
So far the only changes to the stock OF1 are:
Deodexed
Moderatly debloated
Wifi tether provisioning disabled
Start up sound disabled
Rooted*
Busybox added*
*SuperSu and Busybox packages are installed during rom installation.
A list of debloated files can be found here.
Coming soon
Some files were left because they are too integrated into TouchWiz. I don't want people confused by orphaned menu items or get FCs. Some stuff I left because people I know use them. If you want anything back you'll have to get it yourself for now, sorry. I'm open to suggestions on stuff to keep and stuff to remove, but I'll want a good description of their functions before I remove anything. I'm funny about not deleting stuff I don't know what it does.
For those looking for Xposed, I'm using the latest Snapdragon requestConcurrentGC version from here.
Flashing instructions are pretty simple. Boot to TWRP, make a backup, wipe system/data/dalvik/cache, flash the rom and reboot system.
All thanks go to the Yemen rooters and @beaups and @ryanbg for liberating our devices.
thanks i tried it out and its working great! however one of the apps i like is S-Note and you debloated it :/ along with galaxy store. which i cannot find a download source for either, and its needed to reinstall s-note. anyway its a crucial app for the S-pen launcher and s-pen features.
if you could share the apks or upload a full but deodexed superSu/busybox version of this Rom it'd be a real winner.
also im not sure if its just me but i noticed the task manager is a little strange and is missing the ram clear button. ill take a screen shot and upload later
doombuger said:
if you could share the apks or upload a full but deodexed superSu/busybox version of this Rom it'd be a real winner.
Click to expand...
Click to collapse
All of the stock apps are in the system.img files in the Stock Odin tar bundles (available from sammobile.com for instance)
The only trick to getting them out of there is that those (system.img) image files are "sparse" ext4 files. The Android development environment has a tool called "simg2img" which allows you to create an uncompressed image file, which can then be mounted as an ext4 filesytem (loopback mount), and you can browse through there and copy out anything you want.
All of this is more convenient to do in a Linux environment (get yourself VirtualBox and install Ubuntu), but there are workarounds using Windows too, and there are even tutorials here on XDA on how to do this both ways. (Use searches for "sparse image" or "simg2img")
An even easier way is to simply pull them out of TWRP backup files of your rooted-stock ROMs; those "system.ext4.win00x" are just tar files. Heck, you could probably even use 7-zip for that.
You do make backups, right?
Ask your devs to do things that are interesting for the dev and difficult for almost any anybody else to do; not the simple stuff like "go get me some freely available files".
as some people like the stock image, you should do a non-debloated version, like beans did for 4.4.2 NC2/4: http://forum.xda-developers.com/showthread.php?t=2787627 Its just a minor thing, and i can add those apps back in.
How would i enable the startup sound that you disabled?
I'm running the deodexed version of NC4 (with an NC2 bootloader) that i linked above, and finally want to upgrade. I'm assuming that safestrap (which is currently installed) isn't compatible, so do have a link for a version of TWRP that is compatible?
also, can i upgrade from NC4 (with an NC2 bootloader) directly? or is there a step in between that i should do first?
Morlok8k said:
as some people like the stock image, you should do a non-debloated version, like beans did for 4.4.2 NC2/4: http://forum.xda-developers.com/showthread.php?t=2787627 Its just a minor thing, and i can add those apps back in.
How would i enable the startup sound that you disabled?
I'm running the deodexed version of NC4 (with an NC2 bootloader) that i linked above, and finally want to upgrade. I'm assuming that safestrap (which is currently installed) isn't compatible, so do have a link for a version of TWRP that is compatible?
also, can i upgrade from NC4 (with an NC2 bootloader) directly? or is there a step in between that i should do first?
Click to expand...
Click to collapse
i updated to of1 then rooted and bootloader unlocked then used flashify to flash recovery (back up stock recovery if u like) then no more safe strap or worries. but to each their own.
Very cool, thank you!
---------- Post added at 11:34 PM ---------- Previous post was at 11:33 PM ----------
njdan30 said:
i updated to of1 then rooted and bootloader unlocked then used flashify to flash recovery (back up stock recovery if u like) then no more safe strap or worries. but to each their own.
Click to expand...
Click to collapse
How did you bootloader unlock after rooted? Were you able to install custom recovery? If so, do you mind sharing how you did that as well?
Thank you!!
Neo3D said:
Very cool, thank you!
---------- Post added at 11:34 PM ---------- Previous post was at 11:33 PM ----------
How did you bootloader unlock after rooted? Were you able to install custom recovery? If so, do you mind sharing how you did that as well?
Thank you!!
Click to expand...
Click to collapse
yes you need to root 1st in order to get bootloader unlocked then head to play store for flashify the take the 1st(newest recovery)and thats it.check the yemen root http://forum.xda-developers.com/ver...b6-of1-n900v-note-3-verizon-oneclick-t3333569 for of1 use that then the retail to dev unlock and enjoy,for unlock i did the adb method but think theres a 1 click unlock now also http://forum.xda-developers.com/ver...l/official-note-3-verizon-bootloader-t3359370
Problems with data
I appreciate all of your hard work. I do have a question though. Every single 5.0 and newer rom I have tried I have problems getting my data to work reliably. I get 4G after reboot but as soon as I send/receive a SMS message it reverts to 3g until the next reboot. This was a clean install and I've also tried reinstalling sim, done factory reset, cleared all data, everything under the sun I can think of. Nobody else seems to have this problem. Any ideas? Other than that this is exactly what I'm looking for.
May I ask somebody create a .tar version to use with odin.
I has no custom recovery .
Tried peazip software to convert .zip to .tar but odin always hangs when i use file
Long time first boot. thoght i made a brick Thanks mate
Quick question. I have kit Kat 4.4.2 with safe strap on mine. How would I be able to upgrade to this?
nitroevo said:
Quick question. I have kit Kat 4.4.2 with safe strap on mine. How would I be able to upgrade to this?
Click to expand...
Click to collapse
I am also looking for advice. My Note 3 is in a similar position with NC2 and Baja ROM in the stock slot of safestrap.
Hey guys I was able to take the time slooooowly download Stock firmware for our Prevail. Practically no support to this phone at all, but I've been working to change that as best I can. I am learning the ropes of ROM building and I have been able to make use of ASSSAYED Kitchen v.110 (Now upgraded to v1.20).
For those of you who don't know:
Odin tutorial
**DO AN ADVANCED WIPE IN TWRP BEFORE FLASHING. EVERYTHING EXCEPT THE EXTERNAL SD CARD**
Download Samsung USB Drivers (Go to this xda thread here).
Download Odin (Get it here) Extract to Desktop (Or wherever)
Download firmware to desktop (It's in .zip format and you can find it here). Extract .zip file to odin folder (again, or wherever). Extraction should yield G360PVPU2APJ2_G360PSPT2APJ2_G360PVPU2APJ2_HOME.tar
Right click Odin 3.10.6 and click on "run as administrator".
Click on AP and find the extracted ROM. Open it and it will take a minute to load in to Odin...Now make sure the 'Auto Reboot and F. reset time options are ticked and nothing else.
Make sure to be using a quality USB cord. Odin will recognize your phone being plugged in. It will say COM port number in the top left hand corner and added or removed will be in the log window. Once you are ready begin the flash press start.
Relax, It will take about 10 minutes to do it's thing. After the long agonizing initial boot process, you will be back to stock firmware PJ2 for SM-G360P
Hope it helps! So far there is no lollipop for our phone. Click here to check out all my uploads for this device. So far I have a TWRP port that actually works. (Must flash through Odin) an a Stock rooted deodexed busyboxed zipaligned rom of this firmware (Thanks to ASSAYYED Kitchen).
OLDER VERSIONS
OH1 Firmware
I flashed this back to my device in attempt to go stock but system status is still set to Custom just so everyone is aware. Not sure if it could be an error on my part.
just wanted to say thanks i have 2 of these phones 1 use for mp3 player/ play phone and the other my daughter has to use. ive tried a ton of twrps for this and everyone broke recovery. im dl ing the twrp and the rom you posted. ya there is no development on this phone at all. ive tried almost every rom i could to get it to lollipop with no luck. im going to try to get the theme store and the launcher swapped out with an updated version.. n5 s7 any is fine i just want to get it updated lol. ill play with it tonight and let you know how it goes. i appreciate the effort your putting in to this. i dont even have service to them i have a stubborn s7 that refuses to get rooted. i had no prob with the note7 but idk if i have some updated version of s7 but i cannot obtain full root. i need to have my audio mods at least. i have a good one with beats, dolby atomos and viper im going to try on the 360 as well. let me know if you would like the file. after i check if it works on this on that is.
Please stay tuned. Upgrading this thread to the most recent PJ2 firmware.
Thread updated to PJ2 firmware. I can confirm this will make your device status 'Official'.
Thank you!
I just wanted to say:
Thank you so much mate! An amazing job here, I had a broken rom on this device, and thanks to your PJ2 build; I now have a fully working device again!
Fixed the play store, play services, and all the ads and junk on this Textfree branded device (PE2 firmware confirmed). keep up the great work!
Thanks for posting this! I see your other files, would you mind going in more detail how to install the stock rooted deodexed version of this rom? How do you recommend unlocking the bootloader to install TWRP or can we just simply flash it with ODIN then install the stock rooted rom? Thanks!
EDIT: according to this forum looks like you just flash it. Do you recommend your 2.87 over the 3.02?
https://forum.xda-developers.com/ga...overy-teamwin-recovery-project-3-0-0-t3317381
EDIT 2: NVM found your other thread and looks like 2.87 is the way to go.
https://forum.xda-developers.com/ga...rom-stock-rooted-deodexed-zipaligned-t3464419
droiddude414 said:
Thanks for posting this! I see your other files, would you mind going in more detail how to install the stock rooted deodexed version of this rom? How do you recommend unlocking the bootloader to install TWRP or can we just simply flash it with ODIN then install the stock rooted rom? Thanks!
EDIT: according to this forum looks like you just flash it. Do you recommend your 2.87 over the 3.02?
https://forum.xda-developers.com/ga...overy-teamwin-recovery-project-3-0-0-t3317381
EDIT 2: NVM found your other thread and looks like 2.87 is the way to go.
https://forum.xda-developers.com/ga...rom-stock-rooted-deodexed-zipaligned-t3464419
Click to expand...
Click to collapse
Thanks! Just Odin it. Im running 2.8.7 and haven't tried any other versions lately. To install my custom rom, go here.
adrwill2000 said:
Thanks! Just Odin it. Im running 2.8.7 and haven't tried any other versions lately.
Click to expand...
Click to collapse
Awesome, thanks for keeping support alive for this phone!
I'd really like a custom rom for this phone i have to restart at least once a day or this ROM becomes unusably slow.. I mean atleast CM11
Hello. I'm Dave. I just got this phone (G360P Prevail LTE) and I'm pretty excited about it because it could sure use some stuff and I'm new to development and ROM porting. My goal is to bring great ROMs to the lower end phones that are sometimes forgotten in development. Right now I only have one good port under my belt, but it's a great one...PAC 5.1.1 for the ZTE Zmax Z970. Unfortunately, I used device and kernel trees that were already put together by another developer, so I'm not completely sure how to get started on putting trees together for this one. At least it's a Samsung, so mistakes will not be deadly, hopefully lol. There's a lot I don't know and this will be a hell of a learning experience. If anyone could fill me in on which devices that have some development going are most similar to this one, it would be a big help. I flashed the TWRP for the G360T1 before I found @adrwill2000's stuff since it has the same processor and specs and I'm sure you all know how that worked out...I guess I'll start by grabbing stuff for the device that our TWRP was ported from, unless you guys have any better suggestions. It would be best to start with trees from a very similar device. I almost hate to post this because it's very possible I will get nowhere, but I could sure use input from you guys that know this device well as to what my best starting point might be. Thank you.
I'm back to running H1 for now because it seems to be our latest that xposed is working on and imo this KitKat stuff sure needs some Gravitybox. Also, on mine, in J2, when I hit reboot it would reboot recovery. I was gonna fix it, but it's working in H1.
Scratch that...I found the Xposed updated for new 4.4s, so I'm on the deodexed, zipaligned j2 now. Thanks for all you've done with this, @adrwill2000...
It worked for me. My phone was bricked and I could not even get it to hard reset. Thank you!
This Rom Is ONLY for the G730A and the G730V variant of the s3 mini, i am not responsable if this bricks your phone. (this is untested on the G730V model but it should work)
How to Flash:
1. Root phone with KingoRoot and install SuperSu(must be superSU)
2. Install SafeStrap (click here for download)
3. Flash the Rom with gapps
Bugs:
WiFi doesn't work
Root
Power off/restart button doesn't work
You tell me
Features:
Deodexed
Zip aligned
Debloated
Faster than the regular rom
Download for G730A
Download for G730v
Credits:
KachowPow (for the boot animation)
Update: WiFi is working and the build will be uploaded soon!!!!!
turnert said:
Update: WiFi is working and the build will be uploaded soon!!!!!
Click to expand...
Click to collapse
Upload please deodexed rom for G730a with working wifi.
Thank you
Dr_Wolodya said:
Upload please deodexed rom for G730a with working wifi.
Thank you
Click to expand...
Click to collapse
I will upload it later today.
Dr_Wolodya said:
Upload please deodexed rom for G730a with working wifi.
Thank you
Click to expand...
Click to collapse
If you don't want to wait you should be able to unzip the current version and add this it the update script(META-INF/com/google/Android)
symlink("/system/lib/modules/prima/prima_wlan.ko", "/system/lib/modules/wlan.ko");
Then just compress the files back into a zip file and it should fix wifi.
Corrupt Zip File
Whenever I try to flash your ROM in Safestrap for my G-730A it always tells me I have a corrupt zip file and it is unable to flash it. I have tried to download it multiple times (the first time failed for the Mediafire link) and copy it back onto my SD card but to no avail. I have followed all the necessary steps to get this Samsung Galaxy S3 Mini somewhat custom ROM ready. I installed the busybox scripts, enabled safestrap, set the SELinux mode to permissive, installed Xposed and the libraries, now I just need to know how to flash a modded version of the Kitkat 4.4.2 stock ROM onto this device properly. Do you have another version that's more stable, or possibly even a link to an entirely different de-bloat ROM? Thanks!
ROMmon1941 said:
Whenever I try to flash your ROM in Safestrap for my G-730A it always tells me I have a corrupt zip file and it is unable to flash it. I have tried to download it multiple times (the first time failed for the Mediafire link) and copy it back onto my SD card but to no avail. I have followed all the necessary steps to get this Samsung Galaxy S3 Mini somewhat custom ROM ready. I installed the busybox scripts, enabled safestrap, set the SELinux mode to permissive, installed Xposed and the libraries, now I just need to know how to flash a modded version of the Kitkat 4.4.2 stock ROM onto this device properly. Do you have another version that's more stable, or possibly even a link to an entirely different de-bloat ROM? Thanks!
Click to expand...
Click to collapse
My suggestion would just be to manually debloat the rom by just uninstalling all the useless system apps. The stock rom I made is very buggy and because you can't root on this rom you have to flash back to stock with Odin if something goes wrong. I can try and reupload to Google drive if that helps, but I am unable to test it because I bricked all 3 of my s3 mini's. I also ported another rom called tencent os but that has more bugs than this one so it's not worth using.
Noted
turnert said:
My suggestion would just be to manually debloat the rom by just uninstalling all the useless system apps. The stock rom I made is very buggy and because you can't root on this rom you have to flash back to stock with Odin if something goes wrong. I can try and reupload to Google drive if that helps, but I am unable to test it because I bricked all 3 of my s3 mini's. I also ported another rom called tencent os but that has more bugs than this one so it's not worth using.
Click to expand...
Click to collapse
I will take you suggestion and just do the following on the stock ROM manually. I will heed your advice that the ROM you created just isn't ready for primetime, and I would honestly rather trade stability for convenience any day. You don't have to go to the trouble of re-uploading a new one to Google Drive if you don't want to. Speaking of Tencent OS, while I was doing research for this device on XDA that did come up in the search results. I thought nothing of it and I didn't even look at the author of it, but I'm pretty sure it was you Turnert. At this point I think I will just stick to the stock 4.4.2 image and stop looking for what isn't there.
UPDATE: I was able to get the number of system apps down to about 150. So far so good, initially there was some black screens and random apps opening after the preliminary uninstall. All seems to be fine after a soft reset though. I'm liking the performance and the added storage benefit without all that bloatware running in the background taking up room.
ROMmon1941 said:
I will take you suggestion and just do the following on the stock ROM manually. I will heed your advice that the ROM you created just isn't ready for primetime, and I would honestly rather trade stability for convenience any day. You don't have to go to the trouble of re-uploading a new one to Google Drive if you don't want to. Speaking of Tencent OS, while I was doing research for this device on XDA that did come up in the search results. I thought nothing of it and I didn't even look at the author of it, but I'm pretty sure it was you Turnert. At this point I think I will just stick to the stock 4.4.2 image and stop looking for what isn't there.
UPDATE: I was able to get the number of system apps down to about 150. So far so good, initially there was some black screens and random apps opening after the preliminary uninstall. All seems to be fine after a soft reset though. I'm liking the performance and the added storage benefit without all that bloatware running in the background taking up room.
Click to expand...
Click to collapse
Honestly I might buy an s3 mini and see if I can improve this rom a bit considering it's been quite a while since I've done any work on this device. I would love to work on this device again and see if I could maybe get aosp or something running on it even if it's not very likely that aosp will ever run on it.
Hi guys! is this 4.4.2 because basically 4.4.4 was never released for this phone? thx.
kbuss said:
Hi guys! is this 4.4.2 because basically 4.4.4 was never released for this phone? thx.
Click to expand...
Click to collapse
Ya its 4.4.2 it may show 4.4.4 but it's not.
This is for the Sprint SM-T587P "gtaxlqltespr" Galaxy Tab A 10.1 variant only.
As far as I can tell, the Nougat update came out for the Sprint Variant sometime around the 20th of September 2017. Update to the T587PVPU1BQI1 Nougat update if you have not already.
1. Read all instructions, there are no known issues. Be on 7.0.0 official. (QI1)
2 Enable Developer Options. Settings, About Device, Software info, tap on build number until it is enabled.
3. Enable OEM unlock and USB Debugging in the Developer Options menu.
There are a couple options here. You can do any combination of the following:
install TWRP
root via superuser (requires installing TWRP)
disable dm-verity (requires installing TWRP)
root by flashing magisk patched bootimage (does not require TWRP)
disable force-encryption (requires installing twrp)(required if you want TWRP to see /data/ files)(not required for flashing zips such as superuser through TWRP)
To install TWRP:
1. Boot into download mode
2. Launch ODIN, Uncheck "Auto Reboot" in the options tab. Flash included TWRP file in the AP section of ODIN.
To Disable Force-Encryption (if want to see /data/ in twrp)
1. Install TWRP recovery
2 Boot into TWRP recovery
3. Format Data
4. Reboot into TWRP from TWRP reboot menu, without rebooting into system.
5. Flash the included superuser.zip to disable force-encryption and dm-verity
To Root via superuser or disable dm-verity
1. Install TWRP recovery.
2. Boot into TWRP recovery
3. flash superuser.zip (this needs to be done with ADB if you have not disabled force-encryption and are unable to see /data/)
Superuser root provided as-is. Magisk is the recommended root. If you prefer the outdated, beta, un-updatable phh superuser binary which breaks safetynet that's all you. However it is the only way i have found to disable dm-verity.
Magisk v16 root:
Device is stock
If you have not installed twrp, disabled dm-verity, or disabled force encryption:
1. Boot into Download Mode
2. Use the AP section of ODIN to install "fe-dm-patched_boot.img.tar"
Disabled dm-verity, but NOT force-encryption
If you did not format DATA in TWRP and have installed superuser.zip using ADB:
1. Boot into Download Mode
2. Use the AP section of ODIN to install "fe-patched_boot.img.tar"
Disabled Both
If you disabled dm-verity AND disabled force-encryption:
1. Boot into Download Mode
2. Use the AP section of ODIN to install "Magiskv16_patched_boot.img.tar"
WIFI IS NOW WORKING AFTER ROOT/BOOT PATCH
Recovery: twrp-3.1.1-0-gtaxlqltespr.tar
phh's Superuser.zip
fe-dm-patched_boot.img.tar
fe-patched_boot.img.tar
Magiskv16_patched_boot.img.tar
Magisk Manager 5.6.1(105)
XposedInstaller_3.1.4_Magisk.apk
Stock 7.0.0 boot image
Stock 7.0.0 Recovery
phh's Superuser
Nougat Firmware
AP
BP
CP
CSC
Gonna try it now!!! Been waiting for along time.... thanks
Sent from my Sprint Samsung Galaxy Note5 using XDA Labs
THANK YOU!!!!!! this is working great so far. the only question i have is ......have you found a way to get the hotspot/wifi working yet?
any chance you have the stock firmware? sammobile doesnt have it, i may or may not have bricked my device>>>>>>> oops,
T587P need stock firmware and recovery
Hey Guys, I tryed this for the heck of it I thought i may be able to get wifi working but it said i wasnt rooted either , TWRP worked fine but now i did something and i am on tablet but no longer have recovery..but i can get into tablet and boot but have no wifi... does anyone have T587P stock firmware and recovery stock recovery? I just want to flash it back to stock firmware and recovery until someone can come up with a proper root and all where everything works as it should....any help for this , I would be grateful.. I need to get recovery back on here and my wifi working ...PLEASE... Thanks guys for everything
Ok what i did being i just didnt have recovery and wifi , i restored the tablet in samsung smart switch now everything works again as it should..i will hold out until we have a safe root for our T587P devices. Thank you
follow the link below to get back to 100% stock!!! i had to pay for this and i dont wanna see anyone else pay for it. so please let everyone know that they can find it here.
this is for sprint model SM-T587P . you must extract files , then flash with odin......
https://www.mediafire.com/file/88fljatrjrhs5nh/T587PVPU1AQB1_6.0.1_4File_USA (Sprint).7z
---------- Post added at 09:51 PM ---------- Previous post was at 09:51 PM ----------
follow the link below to get back to 100% stock!!! i had to pay for this and i dont wanna see anyone else pay for it. so please let everyone know that they can find it here.
this is for sprint model SM-T587P . you must extract files , then flash with odin......
https://www.mediafire.com/file/88fljatrjrhs5nh/T587PVPU1AQB1_6.0.1_4File_USA (Sprint).7z
Any updates on WiFi fix?
Flash the latest Supersu beta V2.82 sr4. That should give root and no issues with wifi.
Also note to the author. You should post the device this post refers to as there are several Tab A devices.
Rpartin04 said:
THANK YOU!!!!!! this is working great so far. the only question i have is ......have you found a way to get the hotspot/wifi working yet?
Click to expand...
Click to collapse
A stock kernel has to be built from source.
Rpartin04 said:
any chance you have the stock firmware? sammobile doesnt have it, i may or may not have bricked my device>>>>>>> oops,
Click to expand...
Click to collapse
It is linked to in the original post. EDIT. I posted the wrong link originally, i didnt realize it was behind a paywall. http://gsm-firmware.com/index.php?a=browse&b=category&id=8259
DavidBeckett.db said:
Hey Guys, I tryed this for the heck of it I thought i may be able to get wifi working but it said i wasnt rooted either , TWRP worked fine but now i did something and i am on tablet but no longer have recovery..but i can get into tablet and boot but have no wifi... does anyone have T587P stock firmware and recovery stock recovery? I just want to flash it back to stock firmware and recovery until someone can come up with a proper root and all where everything works as it should....any help for this , I would be grateful.. I need to get recovery back on here and my wifi working ...PLEASE... Thanks guys for everything
Click to expand...
Click to collapse
I didnt realize the firmware was behind a paywall, the correct link has been posted.
This is a proper root via the magisk patched boot. There is no reason to flash the recovery at all.
Rpartin04 said:
follow the link below to get back to 100% stock!!! i had to pay for this and i dont wanna see anyone else pay for it. so please let everyone know that they can find it here.
this is for sprint model SM-T587P . you must extract files , then flash with odin......
https://www.mediafire.com/file/88fljatrjrhs5nh/T587PVPU1AQB1_6.0.1_4File_USA (Sprint).7z
---------- Post added at 09:51 PM ---------- Previous post was at 09:51 PM ----------
follow the link below to get back to 100% stock!!! i had to pay for this and i dont wanna see anyone else pay for it. so please let everyone know that they can find it here.
this is for sprint model SM-T587P . you must extract files , then flash with odin......
https://www.mediafire.com/file/88fljatrjrhs5nh/T587PVPU1AQB1_6.0.1_4File_USA (Sprint).7z
Click to expand...
Click to collapse
Anyone who doesnt read the first post closely enough to locate locate the stock firmware being made to pay for it seems like a form of natural selection. Edit: or that would be the case were this the case, however, i posted the wrong link in the OP ( i had visited a lot to find the firmware, i misremembered which one was correct.)
ashyx said:
Flash the latest Supersu beta V2.82 sr4. That should give root and no issues with wifi.
Also note to the author. You should post the device this post refers to as there are several Tab A devices.
Click to expand...
Click to collapse
Is the device not clerarly labeled in the thread title as the sprint only sm-t587p gtaxlqltespr?
Should work or does? You're right, there are many tab a variants, and unlike the ones you develop for, this variant is a snapdragon 625. While you say su 2.82 should work, you would also think 2.72 would work. Bootloop. I included a working su to flash standalone that DOES work in my op for people who do not care about systemless magisk, which is the recommended root at any rate.
arlyn said:
It is linked to in the original post. EDIT. I posted the wrong link originally, i didnt realize it was behind a paywall. http://gsm-firmware.com/index.php?a=browse&b=category&id=8259
Click to expand...
Click to collapse
This as well is not a free deal. It would help out a ton if you just link these files to your account via Google drive, mediafire, ect....
EDIT!!!!
I didn't scroll all the way down... ignore me
arlyn said:
Is the device not clerarly labeled in the thread title as the sprint only sm-t587p gtaxlqltespr?
Should work or does? You're right, there are many tab a variants, and unlike the ones you develop for, this variant is a snapdragon 625. While you say su 2.82 should work, you would also think 2.72 would work. Bootloop. I included a working su to flash standalone that DOES work in my op for people who do not care about systemless magisk, which is the recommended root at any rate.
Click to expand...
Click to collapse
Did you edit it? If not must be going blind.
Any custom kernels made for this model?
Or anyone found source code for this model?
EDIT!!
I really wish my xda-labs would alert me when the op edits the thread. I also found that source code, I have been trying to compile the kernel as well. very new on this end of development. I give it a whirl
Rpartin04 said:
Any custom kernels made for this model?
Or anyone found source code for this model?
EDIT!!
I really wish my xda-labs would alert me when the op edits the thread. I also found that source code, I have been trying to compile the kernel as well. very new on this end of development. I give it a whirl
Click to expand...
Click to collapse
Haha, I didn't realize you had to subscribe to your own threads, I didn't know people were even replying in here for weeks. Thank you for attempting to compile, i know there are some tutorials on xda, i'm pretty sure an flashing an SELinux permissive kernel will fix the wifi issue with the magisk root. I do not know that I'll ever have the time or motivation to compile it myself, but I can help to test.
Thanks arlyn! Will definitely be trying this out.
Says root is not properly installled.... any ideas? I followed directions to a T... even flashed back to stock nougat and tried a 2nd time...
Introducing the first Oreo ROM for the S8 and S8+, its basic don't complain.
First of all, before you go any lower read this:
THIS IS NOT ROOT! This is a custom system image that I modded and allows me to add or remove files and still have it boot and keep Knox intact along with Saftey Net. Unless you mess with the build.prop device stuff, Samsung Pay, Secure Folder, and Google Pay should all work.
Second, If you break your phone or mess up and it boot loops, just flash a stock image and start over. Don't come here crying over it not working because these do work and I have had testers use them and run this.
Third, this is pixelish because all I did was add the pixel launcher and a couple pixel files along with S9+ messenger. This is more of an open project.
Forth, If you are a dev interesting and making your own custom system image, message me and I will tell you the ways of this magic.
NOW FOR THE GOOD PART!
This ROM currently contains the stock Pixel launcher, a couple new /etc/sysconfig pixel files, and the S9 messenger. Knox still works and so does Saftey Net. This has yet to be debloated.
To install it:
1. Go to download mode and flash the file install BL.tar with Modded Odin, all files will be linked in like post 2 or 3, I don't know.
2. Reboot back into download and flash the system.tar (names may vary) in the AP slot with the options reparation and NAND erase all selected, you will also need to use the pit file there. This step will say fail in Odin but that's good.
3. Reboot BACK to download mode and flash the CRB9 AP, BL, and CP. In between the system flashing and this step, hit reset at the bottom of Odin to reset the options.
4. Let the phone reboot. It will boot loop, that's good. Now go to recovery and let this boot loop. It will say something about a cache error, that's perfect.
5. From recovery go to download mode, it might be difficult and you may get to upload mode, just keep holding the keys until you get there. Now flash the CSC file.
6. After flashing CSC you should be in recovery, now clear data and cache. Hit reboot the system or whatever and you should be good!
7. Enjoy whatever is in the ROM because I assume some people are going to link back here at some point.
THANKS to @me2151 for finding this and telling me how to do it and such
Downloads:
S8 Firmware: https://www.androidfilehost.com/?fid=818070582850502859
S8 System: https://www.androidfilehost.com/?fid=890129502657593102 (Might bootloop, if so just flash stock ROM)
S8+ Firmware: https://www.androidfilehost.com/?fid=890129502657592926
S8+ System: https://www.androidfilehost.com/?fid=673956719939832330
New Modded Odin: https://drive.google.com/open?id=1cFvAWFX4E5aqoKqSTR_Nf4h3HgzHUgY7 (this flashes all files)
How to mod it yourself!
This is a little thing on how to mod it yourself.
You need to download the system for the device, just use the one I have above. Then you need to mount it in Linux using the command sudo mount -o loop system.img.ext4 folder name. This should mount as an r/w. I did it in Kali Linux and didn't have issues while Ubuntu did some funky stuff. Then you mod the systems normally like making a ROM. Whenever you mod something you need to set the proper permissions with chmod and context with sudo setfattr -n security.selinux -v ubject_r:system_file:s0 filename. You might need to install attr to get it. Then once you're done, unmount with sudo umount folder name and then add it to a .tar file without any compression and flash it in Odin like the instructions. Just use your system instead of mine. If you make it and post it, just credit me2151 and me (mweinbach).
Told yall i was sitting on it til oreo release
This has such great potential. Thank you guys for bringing hope back to Snapdragon models!
Thanks so much.
mweinbach said:
Reserved 2
Click to expand...
Click to collapse
me2151 said:
Told yall i was sitting on it til oreo release
Click to expand...
Click to collapse
Nice:good::good::good:
Shame I cant try it yet
is there any way you can add csc of exynos variant to snapdragon
sahilg009 said:
is there any way you can add csc of exynos variant to snapdragon
Click to expand...
Click to collapse
Probably not.
Thanks a lot! Can you post how to create a custom rom on here for us devs?
I know this rom is for Snapdragon but is there any chance that your methods would apply to exynos firmware too? A custom non-knox tripping rom would be great
Nice work anyway!
JackJoeR said:
I know this rom is for Snapdragon but is there any chance that your methods would apply to exynos firmware too? A custom non-knox tripping rom would be great
Nice work anyway!
Click to expand...
Click to collapse
@me2151 you know what makes this work, can you check?
S8 files up!
Thanks for sharing this! :good:
What's the main difference between this and the Stock Samsung ROM? Does it have bloatwares if I install on my AT&T variant? I'm sorry, I'm asking since it's not listed on the first post exactly aside from a couple of things you mentioned.
sNoxious said:
Thanks for sharing this! :good:
What's the main difference between this and the Stock Samsung ROM? Does it have bloatwares if I install on my AT&T variant? I'm sorry, I'm asking since it's not listed on the first post exactly aside from a couple of things you mentioned.
Click to expand...
Click to collapse
This has bloat. It also has S9 messenger and pixel launcher. Also some pixel stuff. It's more what others can add.
mweinbach said:
This has bloat. It also has S9 messenger and pixel launcher. Also some pixel stuff. It's more what others can add.
Click to expand...
Click to collapse
I see, a debloated version would be a nice option!
Either way, thank you for your work! :good:
sNoxious said:
I see, a debloated version would be a nice option!
Either way, thank you for your work! :good:
Click to expand...
Click to collapse
I am going to do a debloated one at some point. For now, you can just disable the apps with like sabs.
mweinbach said:
I am going to do a debloated one at some point. For now, you can just disable the apps with like sabs.
Click to expand...
Click to collapse
I know I asked in telegram but is there anyway you can include viper or is that not possible becaue of root permissions?
adj998 said:
I know I asked in telegram but is there anyway you can include viper or is that not possible becaue of root permissions?
Click to expand...
Click to collapse
I can set perms, I am going to leave that to a better ROM dev who understands it more. I would probably kill it.
Hey @mweinbach, thanks for taking the time to make this rom! I have a quick question. I have an S8 and am currently running PartCyborgRom (build AQI6). Can I just flash the firmware and system files without doing anything else beforehand? If not, what steps should I take before installing this?