I flashed the Kernel for cyogen mod. but i forgot to save the original one from the sony tab z.
Now i lealized that some features i have to use are not available in the CM. could anyone send me the Kernel plz :fingers-crossed:
BastlHeller said:
I flashed the Kernel for cyogen mod. but i forgot to save the original one from the sony tab z.
Now i lealized that some features i have to use are not available in the CM. could anyone send me the Kernel plz :fingers-crossed:
Click to expand...
Click to collapse
1). You can't run CM on stock firmware kernel.
2). You didn't specify what version of stock firmware kernel do you need.
Rootk1t said:
1). You can't run CM on stock firmware kernel.
2). You didn't specify what version of stock firmware kernel do you need.
Click to expand...
Click to collapse
I want to go back to the stock Lollipop an so i need a kernel for the 5.1.1 version.
Thx
BastlHeller said:
I want to go back to the stock Lollipop an so i need a kernel for the 5.1.1 version.
Thx
Click to expand...
Click to collapse
The easiest way is to flash stock 5.1.1 with flashtool or restore tablet with pc-companion which will do basically the same.
P.S: Though, if you still need kernel, here it is.
Rootk1t said:
1). You can't run CM on stock firmware kernel.
2). You didn't specify what version of stock firmware kernel do you need.
Click to expand...
Click to collapse
Rootk1t said:
The easiest way is to flash stock 5.1.1 with flashtool or restore tablet with pc-companion which will do basically the same.
P.S: Though, if you still need kernel, here it is.
Click to expand...
Click to collapse
Ok thanks.
I have tried it with the pc companion but it say with other roms it could not reset the tablet ?!?
BastlHeller said:
Ok thanks.
I have tried it with the pc companion but it say with other roms it could not reset the tablet ?!?
Click to expand...
Click to collapse
If so, just use Flashtool (i recommend 0.9.18.6) to flash stock 5.1.1 firmware.
Rootk1t said:
If so, just use Flashtool (i recommend 0.9.18.6) to flash stock 5.1.1 firmware.
Click to expand...
Click to collapse
Works fine thanks a lot
BastlHeller said:
Works fine thanks a lot
Click to expand...
Click to collapse
Hello
i need also the kernel can anyone reupload it for me please?
I got the SPG311. Hope someone got it!!
Best regardes Michael
Related
Hi after i flashed the ddr kernel from here http://forum.xda-developers.com/showthread.php?t=1956283 to my xperia mini i am unable to go into my phone anymore. the DDR logo shows up and then the screen goes black while the touch keys are lit up. I have also tried flashing a custom rom after the kernel problem by going into the cwm recovery but it stys the same no matter what. Please help me guys. really need your help. maybe the problem is not big for you but i am new to this android thing. any help would be highly appreciated.
Sorry but u are on the wrong section, questions should be posted at General, but i think that DDS Kernel are only for mini pro right? try to flash the FXP cm10 kernel, this will help you
jamy_hallian said:
Hi after i flashed the ddr kernel from here http://forum.xda-developers.com/showthread.php?t=1956283 to my xperia mini i am unable to go into my phone anymore. the DDR logo shows up and then the screen goes black while the touch keys are lit up. I have also tried flashing a custom rom after the kernel problem by going into the cwm recovery but it stys the same no matter what. Please help me guys. really need your help. maybe the problem is not big for you but i am new to this android thing. any help would be highly appreciated.
Click to expand...
Click to collapse
First, wrong section.
Secondly, flash stock firmware and then flash another kernel
Thank you guys. Solved the problem by flashing rage kernel. Sorry for posting in wrong section. It was not intentional.
jamy_hallian said:
Thank you guys. Solved the problem by flashing rage kernel. Sorry for posting in wrong section. It was not intentional.
Click to expand...
Click to collapse
The mistake you did was you flashed jellybean kernel for ics Rom
Sent from my SK17i
tanny90 said:
The mistake you did was you flashed jellybean kernel for ics Rom
Sent from my SK17i
Click to expand...
Click to collapse
i am now back to stock ROM 4.1.B.0.587. because i didnt really like any of the custom roms. i guess i am a stock rom guy
can i flash the rage kernel using flashtool. will it bring any improvements to the phone?
jamy_hallian said:
i am now back to stock ROM 4.1.B.0.587. because i didnt really like any of the custom roms. i guess i am a stock rom guy
can i flash the rage kernel using flashtool. will it bring any improvements to the phone?
Click to expand...
Click to collapse
Your rom will be pre-rooted and you will have a permanent recovery. Also you can overclock your phone.
andogeek10 said:
Your rom will be pre-rooted and you will have a permanent recovery. Also you can overclock your phone.
Click to expand...
Click to collapse
so you are saying i CAN flash the rage kernel (or any ics kernel?) to my phone now?
jamy_hallian said:
so you are saying i CAN flash the rage kernel (or any ics kernel?) to my phone now?
Click to expand...
Click to collapse
If you have an unlocked bootloader you can flash any kernel you want.
Sent from a mango
andogeek10 said:
If you have an unlocked bootloader you can flash any kernel you want.
Sent from a mango
Click to expand...
Click to collapse
how do i check whether my bootloader is locked or unlocked? i mean where is its status located?
jamy_hallian said:
how do i check whether my bootloader is locked or unlocked? i mean where is its status located?
Click to expand...
Click to collapse
If you were able to flash the rage kernel and DDS kernel then that means that you have an unlocked kernel. Also if you are able to boot into fastboot then you have an unlocked bootloader.
Sent from a mango
jamy_hallian said:
how do i check whether my bootloader is locked or unlocked? i mean where is its status located?
Click to expand...
Click to collapse
If you said that you solved your problem flashing Rage Kernel, then your bootloader is unlocked. Cause locked bootloaders cannot flash kernels
thank you andogeek10 & pastillero
jamy_hallian said:
thank you andogeek10 & pastillero
Click to expand...
Click to collapse
You are welcome
Sent from a mango
jamy_hallian said:
how do i check whether my bootloader is locked or unlocked? i mean where is its status located?
Click to expand...
Click to collapse
On stock rom type *#*#7378423#*#* -> Service Info -> Configuration -> Rooting Status: Bootloader unlocked: yes
Or you connect it in fastboot mode to flashtool, it should say Bootloader Status: Rooted (or simliar) :good:
jamy_hallian said:
i am now back to stock ROM 4.1.B.0.587. because i didnt really like any of the custom roms. i guess i am a stock rom guy
can i flash the rage kernel using flashtool. will it bring any improvements to the phone?
Click to expand...
Click to collapse
Where did you get the stock rom .587? I am using Cyanogenmod 10 but still need it incase of a backup plan... And if you have it please post me the stock kernel which came with .587 too... thanks.
icarious said:
Where did you get the stock rom .587? I am using Cyanogenmod 10 but still need it incase of a backup plan... And if you have it please post me the stock kernel which came with .587 too... thanks.
Click to expand...
Click to collapse
http://naw32fsystem.blogspot.com/2012/09/all-xperia-2011-official-stock-firmware.html
you can find it here
saqib nazm said:
http://naw32fsystem.blogspot.com/2012/09/all-xperia-2011-official-stock-firmware.html
you can find it here
Click to expand...
Click to collapse
thanks for that mate.. it includes the stock kernel in the image too?
icarious said:
Where did you get the stock rom .587? I am using Cyanogenmod 10 but still need it incase of a backup plan... And if you have it please post me the stock kernel which came with .587 too... thanks.
Click to expand...
Click to collapse
I got it from here http://www.4shared.com/rar/29kaVZ1E/Xperia_Mini_ST15i_41B0587.html
And just for the record, when I go into the update centre app on my phone it still asks me to update to 4.1.B.0.587 with 0.1 mb of update download. I dont know why this is so. but in the about phone section the software version is 4.1.B.0.587. but it still asks to update to 4.1.B.0.587.
jamy_hallian said:
I got it from here http://www.4shared.com/rar/29kaVZ1E/Xperia_Mini_ST15i_41B0587.html
And just for the record, when I go into the update centre app on my phone it still asks me to update to 4.1.B.0.587 with 0.1 mb of update download. I dont know why this is so. but in the about phone section the software version is 4.1.B.0.587. but it still asks to update to 4.1.B.0.587.
Click to expand...
Click to collapse
its pretty obvious.. when you flash the stock rom manually, some of the stuffs are not in order as the factory one even if the version is same.. so to put it in order perfectly you have to install the update...
---------- Post added at 09:14 PM ---------- Previous post was at 09:13 PM ----------
by the way.. what tool did you use to flash the stock rom ?? flashtool ??
Hi Guys!
I want to ask some question.
Today my friend rooted his phone.And we unlocked the bootloader.And we installed cwm.But now he cant open his phone.Freeze on SONY screen.We tried to fix on update service and sony pc companion.But not fixed.What can we do?
vaqol said:
Hi Guys!
I want to ask some question.
Today my friend rooted his phone.And we unlocked the bootloader.And we installed cwm.But now he cant open his phone.Freeze on SONY screen.We tried to fix on update service and sony pc companion.But not fixed.What can we do?
Click to expand...
Click to collapse
If he has unlocked bootloader he can't fix his device via pc companion.
Which device uses? Are you sure he installed a cwm for the device he uses?
Please post here the link of the cwm he used and the device he uses.
DaRk-L0rD said:
If he has unlocked bootloader he can't fix his device via pc companion.
Which device uses? Are you sure he installed a cwm for the device he uses?
Please post here the link of the cwm he used and the device he uses.
Click to expand...
Click to collapse
I cant share the link because i am new on the xda.Write to google ''xperia u cwm install'' will be come theunlockr's sites.We are installed on this site..
we set up the CWM-Based Recovery
vaqol said:
I cant share the link because i am new on the xda.Write to google ''xperia u cwm install'' will be come theunlockr's sites.We are installed on this site..
we set up the CWM-Based Recovery
Click to expand...
Click to collapse
Are you sure you installed a cwm based on the firmware you use? Which firmware are you using? Which rom? ics? gb? jb?
DaRk-L0rD said:
Are you sure you installed a cwm based on the firmware you use? Which firmware are you using? Which rom? ics? gb? jb?
Click to expand...
Click to collapse
He was use stock rom ics.And he rooted phone.And unlocked bootloader.Try to install cwm.We are installed but now phone not open
vaqol said:
He was use stock rom ics.And he rooted phone.And unlocked bootloader.Try to install cwm.We are installed but now phone not open
Click to expand...
Click to collapse
Try flashing stock Rom again.
Download an ics ftf file from development section here and flash it via flashtool. I recommend you the .54. Root it and when you're done let me know.
DaRk-L0rD said:
Try flashing stock Rom again.
Download an ics ftf file from development section here and flash it via flashtool. I recommend you the .54. Root it and when you're done let me know.
Click to expand...
Click to collapse
We'll try.Thanks darklord
vaqol said:
We'll try.Thanks darklord
Click to expand...
Click to collapse
Since you are on unblocked bootloader flash this kernel if you want, it's a great one. Prerooted, with integrated cwm recovery and there is an overclocked version too. here is the link : http://forum.xda-developers.com/showthread.php?t=2299748
Read carefully the instruction on how to install this kernel. Note that you have to install one of this version of firmware: 6.1.1.B.1.54. You can find this version here : http://forum.xda-developers.com/showthread.php?t=2028139
Enjoy!
hello i'm newbie
dtrungjf said:
hello i'm newbie
Click to expand...
Click to collapse
Are you facing a similar issue?
just download a .FTF ROM file and fash it using Flashtool, and everything will be fine . sometime i get this case.
Recently I updated CM7 to my Sony Xperia X10 mini pro.But now i want to update it JBminiProject.I flashed it through Flash tool and installed zip. to it(JBmini.zip).All things are wiped i knew it but my phone is freezing at SE logo,and recovery mode isn't working too.Anyone have solution?.new here..
prisoner08 said:
Recently I updated CM7 to my Sony Xperia X10 mini pro.But now i want to update it JBminiProject.I flashed it through Flash tool and installed zip. to it(JBmini.zip).All things are wiped i knew it but my phone is freezing at SE logo,and recovery mode isn't working too.Anyone have solution?.new here..
Click to expand...
Click to collapse
What? SE-Logo? Doesn't that say enough?
SmG67 said:
What? SE-Logo? Doesn't that say enough?
Click to expand...
Click to collapse
Sony Ericsson logo
Any way to revert to CM7 or go to Recovery mode?..
prisoner08 said:
Any way to revert to CM7 or go to Recovery mode?..
Click to expand...
Click to collapse
You shouldn't have an SE-kernel logo on JB, it should be an nAa-logo Which CM7 ROM were you using before?
first it was original froyo 2.1 then i updated gingerbread(2.3 CM7).
prisoner08 said:
first it was original froyo 2.1 then i updated gingerbread(2.3 CM7).
Click to expand...
Click to collapse
Flash the nAa-JB kernel
SmG67 said:
Flash the nAa-JB kernel[/QUOTE
Can you provide linke for nAa kernal?.There are bunch of kernals here for X10 mini pro so i puzzled.
Click to expand...
Click to collapse
thats my logs in Flashtool
prisoner08 said:
thats my logs in Flashtool
Click to expand...
Click to collapse
I'm a bit puzzled by your flashtool output, even when installing the JB rom on the stock kernel you should still have root access, so I don't know what happened there.
I would suggest this kernel, but you may have to go through flashing back to original 2.1 firmware and go through the rooting process again.
So how to back original firmware will you please elaborate it?.I don't know about reverting.
Bro I reverted my phone to its original firmware by flashing.But dislike its original firmware.please provide me the correct firmware zip of MiniJB or ICS.I also reached at nAa recovery.
prisoner08 said:
Bro I reverted my phone to its original firmware by flashing.But dislike its original firmware.please provide me the correct firmware zip of MiniJB or ICS.I also reached at nAa recovery.
Click to expand...
Click to collapse
If you can flash that kernel i linked to you can use the jbmini firmware you already had with that.
Hi guys,
I really need help here. I have a SGP312, bootloader unlocked, and I'd like to get back to stock rom 10.7.A.0.228 because I need MHL-Output and this doesn't work with any custom rom I tried. Here's the problem: I can get into fastboot and into flash mode but nothing I try is working. If I use flashtool the and flash latest XperiFirm ROM for SGP312 everything is running fine until I try to boot. The Sony logo appears and then nothing happens. Once I waited for over 30 minutes. Screen stays on but it's not booting.
So back to flashing recovery...in recovery I can flash ALL custom roms I want. LineageOS, crDroid, CyanogenMod, no problem. If I try to flash this: "https://forum.xda-developers.com/xperia-tablet-z/general/stock-10-7-0-228-vmo-t3303365" I have same problem as described before. Sony logo pops up, screen stays on, no boot.
Also I tried different recoveries TWRP, CWM, Phil's and so on and nothing seems to work. With wipes without wipes does not matter...
And I tried Sony flash tool Emma (with rom for SGP11) and I tried with TWRP to flash a backup of 10.7.A.0.228 I made...both with same results
Can anyone help? I just want to go back to Android 5.1.1 (root preferred but if no root it's also okay) or I need a custom rom with working MHL. Does anyone have the one clue that can get me back to stock rom?
Thanks guys!
johneggman said:
Does anyone have the one clue that can get me back to stock rom?
Thanks guys!
Click to expand...
Click to collapse
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool 0.9.18.6.
It will work.
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool.
It will work.
Click to expand...
Click to collapse
Thank you very much! I'll give that a try. Right now I'm having problems with flashtool 0.9.23.2. It gives me the "Processing of loader.sin finished with errors" and "Error in processHeader : 1" when I try to flash. Drivers are installed correctly, tablet z is recognized as "Sony sa0107". I'm running Windows 10 64bit and flashtool as admin.
Any ideas?
johneggman said:
Thank you very much! I'll give that a try. Right now I'm having problems with flashtool 0.9.23.2. It gives me the "Processing of loader.sin finished with errors" and "Error in processHeader : 1" when I try to flash. Drivers are installed correctly, tablet z is recognized as "Sony sa0107". I'm running Windows 10 64bit and flashtool as admin.
Any ideas?
Click to expand...
Click to collapse
you need version 0.9.18.6.
Rootk1t said:
you need version 0.9.18.6.
Click to expand...
Click to collapse
Thank you! I'll give that a try as soon as I have time. If that also does not work I'll try flashing with my Macbook. Maybe my Windows computer really has some driver issues.
Rootk1t said:
you need version 0.9.18.6.
Click to expand...
Click to collapse
Hi Rootk1t,
thanks for the tip! It worked. I went from 4.4.4 to 5.1.1 prerooted although I had to do this with a Macbook. Even version 0.9.18.6 didn't want to flash my SGP312. I think the drivers on my windows machine are really messed up. But now everything is fine!
Thanks again!
Do you have any hints for me where I can find older stock versions?
schaeaef said:
Do you have any hints for me where I can find older stock versions?
Click to expand...
Click to collapse
Try finding your FTF on http://xperiafirmware.com/
johneggman said:
Hi Rootk1t,
thanks for the tip! It worked. I went from 4.4.4 to 5.1.1 prerooted although I had to do this with a Macbook. Even version 0.9.18.6 didn't want to flash my SGP312. I think the drivers on my windows machine are really messed up. But now everything is fine!
Thanks again!
Click to expand...
Click to collapse
So where did you find the stock 4.4.4 for SGP312? Every single thing I find, links are dead. Thanks
jhcomputerguy said:
So where did you find the stock 4.4.4 for SGP312? Every single thing I find, links are dead. Thanks
Click to expand...
Click to collapse
I'm gonna check as soon as get home. All I remember is, that I was searching a long time because, as you said, all links were dead. Maybe I still have the ROM somewhere in my files. I'll get back to you.
jhcomputerguy said:
So where did you find the stock 4.4.4 for SGP312?
Click to expand...
Click to collapse
I have some tablet firmwares saved.
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool 0.9.18.6.
It will work.
Click to expand...
Click to collapse
This was exactly what I needed, thanks! Couldn't flash anything on my SGP311 with the latest Flashtool, but followed your advice and had no issue.
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool 0.9.18.6.
It will work.
Click to expand...
Click to collapse
thanks this fixed my SGP311
I flashed 4.4.4 rom
managed to find on 4pda russian website. not sure if pasting link is allow here but just google 4pda and your model number or topic 470240
the page has a complete archive
This saved my SGP311! Thanks for sharing the breadcrumbs to an active download link for 4.4.4 in 2018, found it, downloaded it, flashed it, booted again!
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do.
Click to expand...
Click to collapse
Just for the search engine: 5.0.2 didn't work for me either - same symptoms as with 5.1.1. Going back to 4.4.4 worked.
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool 0.9.18.6.
It will work.
Click to expand...
Click to collapse
Thank you SO much! I have been flashing umpteen versions with no luck and now with a very ancient "store front" version I'm back up and running! Thanks!
I'm sorry but I can't find any suitable firmware for SGP312.
I'm currently on Android 5.1.1 (Build 10.7.A.0.228, Germany/EU if that matters), and I'd really like to try to upgrade it to LineageOS 15.1 for all kinds of reasons; but in case that I botch anything (or the apps I really need don't work, like the screen time manager, as it's the kids' device), I really want to have a working firmware at hand to at least recover it back.
Kinda-noob question: do I really need a flashable firmware or would a full nandroid backup work for a rollback once I have TWRP installed?
XPUser99 said:
I'm sorry but I can't find any suitable firmware for SGP312.
I'm currently on Android 5.1.1 (Build 10.7.A.0.228, Germany/EU if that matters), and I'd really like to try to upgrade it to LineageOS 15.1 for all kinds of reasons; but in case that I botch anything (or the apps I really need don't work, like the screen time manager, as it's the kids' device), I really want to have a working firmware at hand to at least recover it back.
Kinda-noob question: do I really need a flashable firmware or would a full nandroid backup work for a rollback once I have TWRP installed?
Click to expand...
Click to collapse
For a kids device, i would recommend to stay on sony stock 5.1.1, because games run faster there, also it is already tried and tested with easy root installation and debloating.
To revert back from custom ROM (LOS or RR) to stock you'll need to flash firstly any firmware (like 4.4.4) except the latest 5.1.1, then boot it, and afterwards update to 5.1.1 if you want so. If you revert straight to the latest 5.1.1 stock, you'll get permanent bootloop or black screen issue.
So you need to have at least two stock firmware packages.
As for nandroid backup, you can't revert from custom rom to stock via restoring nandroid backup.
Fresh install is recommended.
Hello House, Just Recently I Flashed Franco Kernel And I'm Experiencing Battery Drain More.
I Want To Know How I Can Get Back To Stock Kernel.
Thank You
Just flash stock kernel
martinsskutans said:
Just flash stock kernel
Click to expand...
Click to collapse
Sorry, But I Couldn't Find The Stock Kernel On XDA.
Please Link If You Know Where I Could Find It
You didn't backup stock kernel?
martinsskutans said:
You didn't backup stock kernel?
Click to expand...
Click to collapse
So how can we backup stock kernel? I want to know too.
Flashify can do that.
TWRP has option to backup boot partition, but haven't used that, so can't tell if this backup contains kernel, maybe somebody can tell this.
martinsskutans said:
Flashify can do that.
TWRP has option to backup boot partition, but haven't used that, so can't tell if this backup contains kernel, maybe somebody can tell this.
Click to expand...
Click to collapse
I didn't back up the stock kernel. So, if I flash a stock rom through TWRP will that get me back on Stock Kernel?
Yes, if You are on that same ROM right now.
martinsskutans said:
Yes, if You are on that same ROM right now.
Click to expand...
Click to collapse
Thanks, Man.