Samsung a500g official marshmallow update 6.0.1 - Galaxy A3, A5, A7, A8, A9 General

https://drive.google.com/open?id=0B4oPxupgegT_R1V1T18wa1liZTA
Video link - https://www.youtube.com/watch?v=7LgQS4z5OzI

About new os 6.0.1 for A500G
Ive upgraded my a5 to android 6.0.1 with the band version A500GXXU1CPH4 and found noting new other than the icons and security patch with Marshmallow os; still the skin of the dialler, systemui, etc remains the same as in the lollipop.

Google play services error after updating
Can anyone help me...after flashing the firmware everything is working fine except google play store and google play services.
It shows a notification that "Google play services wont work unless you update google play services". And after I tap that notification google play store is opened but it does not load anything its just stuck like that...blank...I can swipe from left to see my account logged in but cannot access the play store to update or download...its just white blank
Please help.
Thanks

Just update from the play store
Go to play store and update the Google play service buddy; It will take a while at tyms . Cheers

A500g google play services error
Google play store isn't working...when i open it...it is just blank...I cant download anything its blank. @meemb

Try after a reboot
Yesterday the same happened to me. I just restarted my mobile and tried; the play store showed up and I happend to update the google play service. Also check ur Internet connectivity buddy

I rebooted but it didn't work. Did a factory reset too...even though it doesn't work. After factory reset it is stuck in checking info when i open google play.
Came back to lollipop. I downloaded the 6.0 firmware from updato.com

Oops!
I am unsure buddy but in my case I just upgraded my phone via OTA. If the os Is not installed then download the same from sammobile and install it via odin by putting ur phone in download mode. this will do.

There is no 6.0.1 firmware for a500g in sammobile
---------- Post added at 01:30 PM ---------- Previous post was at 01:29 PM ----------
I didn't get the OTA update also..

You check the settibgs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is I got my phone upgraded to; If ur phone is a500g you should get this update once you hit software update in settings menu.
---------- Post added at 01:39 PM ---------- Previous post was at 01:37 PM ----------
Sent from my SM-A500G using XDA-Developers mobile app

It's showing this whenever I hit software update

My current firmware

May be the update just dint hit ur locality. But I thing you will receive it soon but not sure why you didn't get it.
Sent from my SM-A500G using XDA-Developers mobile app

Thanks for your help..will wait...hope i get it soon

Yea buddy... Cheers
Sent from my SM-A500G using XDA-Developers mobile app

Can you tell me the new features you noticed after the update...It can be helpful to other people too..
Thanks

do you want a google drive link?
simaan37 said:
There is no 6.0.1 firmware for a500g in sammobile
---------- Post added at 01:30 PM ---------- Previous post was at 01:29 PM ----------
I didn't get the OTA update also..
Click to expand...
Click to collapse
do you want a google drive link?

No new features
simaan37 said:
Can you tell me the new features you noticed after the update...It can be helpful to other people too..
Thanks
Click to expand...
Click to collapse
Theres no new update. it seems same like the old lollipop

ash_003 said:
Theres no new update. it seems same like the old lollipop
Click to expand...
Click to collapse
sammy wont give any new features
we must port roms to make device more useful:laugh:

:good: @ash_003
---------- Post added at 03:03 PM ---------- Previous post was at 03:02 PM ----------
ash_003 said:
do you want a google drive link?
Click to expand...
Click to collapse
Yeah...please give me the link...my variant is A500G

Related

[Rom] VDT-V1 Super Lite LG G3 Cat 6 F460L/S/K

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
******************************************************************************************************************************************************​
* Benefits
- Created from the F460S V10F background.
- Fix all errors welder.
- Remove the keyboard korean heard calling and texting.
- Add the app as walkman sony, watch movies, view photos, sketches of Z2.
- Add the beautiful and lively theme.
- Fix error message, heard the call of the three operators L, S, K.
- Update the latest app for the period 27.08.2014.
- Add tweak build.prop Tweaks and help smooth machine.
- Mod multitasking split the full screen app.
- And a few features that invite you to explore further.
* How to Up :
- Request you to be root.
- You download the rom file to unzip the subdirectories inside the rom.
- Inside 1 BusyBoxPro.apk software requires you to install it and then open it up waiting for it to load to 100% then you click "Install" until it shows up 1 white board and then turn it off and next steps following.
- Copy materials folder "system" in memory of the machine.
- Then you run the file "VDT-V1 Super Lite LG G3 Cat 6" when the screen starts to run it asks for permission to connect to your computer, then you agree. Then the Super SU it asks you hit allowed.
- Wait for running range 10-15 minutes depending on the configuration of your computer.
- Run finished it says "Press Enter to Vao Recovery" then you follow
- In the recovery then you "Select wipe data / factory reset" and "wipe cache Chon paritition" to clean the machine offline.
- Reboot and resumed full turn shall inform the developer as options -> USB debugging mode and then we resumed unzipped folder and run right past the patch file corresponding to each your machine.
- Run finished reboot and use only. Wishing you happy with VDT-ROM.
MODERATOR EDIT: The links have been removed due to XDA Rules violations
You are amazing, when will vdt v9 for g3 801 dude?
Sent from my LG-F400S using XDA Premium 4 mobile app
It's rom from F460 for F400 ?? or Only for F460 ?
Can you post a mirror? Too many people downloaded from the google drive, cant download anymore.
Thanks
To the op, I can provide 2 very fast and reliable mirrors if you like. Just provide me a file and I'll get it taken care of for ya
When for d855?
I download the ROM and successfully installed on my F460S. When running the "VDT-V1 Super Lite LG G3 Cat 6" bat file, it took about 7 minutes before I can go to the phone recovery mode. When I select "Select wipe data / factory reset" on the phone, it took a long time before the process completed (maybe 5 or 6 minutes). I was a little worry when this process took so long, but it finally completed. I follow the rest of the instruction without any problem. I setup the phone again (from Titanium Pro backup) and have not encounter any problem yet. Thanks VanDieuTot for the first F460S ROM and looking forward to your continue supporting this phone.
---------- Post added at 11:50 AM ---------- Previous post was at 11:45 AM ----------
One more thing. I installed XPOSED, Tweaksbox 1.2 and Cobalt G3 theme and did not have any problem yet.
---------- Post added at 12:02 PM ---------- Previous post was at 11:50 AM ----------
VanDieuTot,
Question, Do you have the image file to flash the F460S back to stock in case we get into bootloop or want to go back to stock? I can not find any information about this when google. Thanks.
Sent from my LG-F460S
---------- Post added at 12:11 PM ---------- Previous post was at 12:02 PM ----------
Sent from my LG-F460S
Nice, some love for the cat.6
Thank you dev!
What is a viable option for rooting F460K?
Does this ROM persist through reboots and if the F460 can load a custom ROM then I'm guessing it's not that hard to load it on the other G3 versions (despite locked bootloaders)?
Also, is there anything significantly different about the F460, aside from the CAT 6 4G, compared to the other G3s?
Eagledig said:
It's rom from F460 for F400 ?? or Only for F460 ?
Click to expand...
Click to collapse
any answer to this question?
What you desire in VDT-V2.
vandieutot said:
What you desire in VDT-V2.
Click to expand...
Click to collapse
This thread is closed for XDA Rules violations concerning warez.
@vandieutot Please read your PM's

[EFS][Modem][Radio] NH1 and NK1 baseband EFS partition issues

Hello Awesomes!!
we notice very common issue on CustomROMS for our device
Grand 2 (G7102, MS013g)
BLANK SCREEN on Wakeup.
scenario is when we install the new rom everything seem to work untill screen goes off then BAM!!
BLACK SCREEN even light into on "but touch buttons are lighting up"
if u keep clicking power button randomly it'll work for random time then it wont work again.
Notice
I notice this happens with me and other phones that has
Baseband Version:
G7102XXUBNK1
but never happens on users using phone that has:
Baseband Version:
XXXXXXXXNH1
<<<< XXX because i'm not sure what is the version exactly >>>>
Why this thread is Open?!
I want to help Devs to keep track on which devices has that issue (blackout on wakeup)
and to try to group up how many versions of baseband been released by Samsung. for now i know these 2 only so please check your baseband version and give us a comment if its not NH1 nor NK1 then please submit to the Poll eitherways.
CHALLENGE
now for a step from me "i'm an NK1 user" i need an "NH1" user to upload his EFS partition to googledrive or somewhare using an app called EFS Backup (get it from play store) i'll try to flash it on my phone to see if i'll have any issues and if that would solve the blackout issue.
If you needed help with that just ask me i'll guide you in a reply.
LET THE WAR AGAINST BLACKOUT BEGIN!!​
reserved
My phone is nk1 and have blackscreen bug.
Efs partition dropbox.com/s/iwcy7vl52it5v1n/efs_backup_2015-04-22_21-39-08.tar.gz?dl=0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
abcd1232 said:
My phone is nk1 and have blackscreen bug.
Efs partition dropbox.com/s/iwcy7vl52it5v1n/efs_backup_2015-04-22_21-39-08.tar.gz?dl=0
View attachment 3276260
Click to expand...
Click to collapse
thank you very much! however your phone is NH1 not NK1
abcd1232 said:
My phone is nk1 and have blackscreen bug.
Efs partition dropbox.com/s/iwcy7vl52it5v1n/efs_backup_2015-04-22_21-39-08.tar.gz?dl=0
View attachment 3276260
Click to expand...
Click to collapse
hey link not working
i have this issue when i installed blisspop official and cm 13
let me have the right to fight against black issue
---------- Post added at 12:45 PM ---------- Previous post was at 12:14 PM ----------
xwaleedooox said:
hello awesomes!!
we notice very common issue on customroms for our device
grand 2 (g7102, ms013g)
blank screen on wakeup.
scenario is when we install the new rom everything seem to work untill screen goes off then bam!!
Black screen even light into on "but touch buttons are lighting up"
if u keep clicking power button randomly it'll work for random time then it wont work again.
notice
i notice this happens with me and other phones that has
baseband version:
G7102xxubnk1
but never happens on users using phone that has:
Baseband version:
Xxxxxxxxnh1
<<<< xxx because i'm not sure what is the version exactly >>>>
why this thread is open?!
i want to help devs to keep track on which devices has that issue (blackout on wakeup)
and to try to group up how many versions of baseband been released by samsung. For now i know these 2 only so please check your baseband version and give us a comment if its not nh1 nor nk1 then please submit to the poll eitherways.
challenge
now for a step from me "i'm an nk1 user" i need an "nh1" user to upload his efs partition to googledrive or somewhare using an app called efs backup (get it from play store) i'll try to flash it on my phone to see if i'll have any issues and if that would solve the blackout issue.
If you needed help with that just ask me i'll guide you in a reply.
let the war against blackout begin!!​
Click to expand...
Click to collapse
cant we just flash a stock rom with this baseband version
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
PULKIT SINGH said:
hey link not working
i have this issue when i installed blisspop official and cm 13
let me have the right to fight against black issue
---------- Post added at 12:45 PM ---------- Previous post was at 12:14 PM ----------
cant we just flash a stock rom with this baseband version
Click to expand...
Click to collapse
https://samsung-firmware.org/downlo... DUOS/9j90/XSE/G7102XWUBNI2/G7102OLBBNI2/#_=_
thank you very much! however your phone is NH1 not NK1

Receiving ads in notification bar in Micromax Canvas Spark

I bought Micromax Canvas Spark q380 2 days back and have either uninstalled or disabled most of useless apps that were pre-installed in it. I have updated most of Google related apps and have not installed any other 3rd party apps. Only Clean Master was manually updated (ie not through Play Store but getting installed/updated itself)
Now whenever I connect to internet then I am receiving ads in notification bar to install apps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas which adware/malware this Micromax people have installed?!
Or how to stop these ads or uninstall the specific app causing this?
install kingroot 4.8 and uninstall "software update" ROCK GOTA process.
install kingroot 4.8 and download ES FILE MANAGER from play store, then open ES FILE MANAGER and open his SETTING then disable RECYCLE BIN and enable ROOT EXPLORER, then permission ALLOW, then goto above side bar and go to DEVICE MEMORY (not internal memory, not external sd card), then open VENDOR folder then open OPERATOR. select all 7-8 application and delete it, then restart and enjoy and plz reply me if u r not satisfied, bcz i hv those mobile and i was faced this problem.
psychem said:
install kingroot 4.8 and uninstall "software update" ROCK GOTA process.
Click to expand...
Click to collapse
I am unable to uninstall or even disable "software update". I was only able to force stop it, but it again restarts..
F**K you Micromax for installing such malware/adware. I am surprised that inspite of selling millions of this model, one has complained about it. When I am posting this feedback on snapdeal, than those buggers are deleting my reviews...
What is kingroot 4.8? Do I neet to root my phone for that?
Biker Biker said:
I am unable to uninstall or even disable "software update". I was only able to force stop it, but it again restarts..
F**K you Micromax for installing such malware/adware. I am surprised that inspite of selling millions of this model, one has complained about it. When I am posting this feedback on snapdeal, than those buggers are deleting my reviews...
What is kingroot 4.8? Do I neet to root my phone for that?
Click to expand...
Click to collapse
yea this is a adware phone. thats why its cheap.
ya kingroot is for rooting the phone get it from https://www.kingoapp.com/
this link is official kingroot
www.kingroot.net
not www.kingoapp.com
---------- Post added at 05:36 PM ---------- Previous post was at 05:36 PM ----------
bcz kingoapp hv not AUTO START DISABLE/ENABLA function
---------- Post added at 05:38 PM ---------- Previous post was at 05:36 PM ----------
bikerbiker, plz ye krke dekho jo hmne aapko btaaya h, aapki sari shikayte door ho jayegi, kingroot se aapka set root ho jayega, tb hi aap in preinstall ad wali apps uninstaal kr skoge, otherwise aap uninstaal to kr doge but aapki inbuilt memory (rom) me hmesha bni rhegi
---------- Post added at 05:40 PM ---------- Previous post was at 05:38 PM ----------
hmne upr jo process btayi h wo ek baar krke to dekhiye, aapka koi nuksaan nhi hoga, agr faayda mile to thnk khna na bhooliyega

[Fix] Gear Fix on N9

Gear Fix for Note 9
As we know recently custom ROM breaking Gear connection and I have fixed it very early with first release of my ROM
Recently my colleague @geiti94 seek help for this and I have share my apks to help him
As fair share policy of XDA rules, now it can be used by others as well with proper credits So sharing here my apks which you can use on any N9 ROM. (May be on non TW as well, but not tested)
Requirement
- If you have already Paired then first unpair it from BT settings
- Must uninstall Gear App if you have already Installed (Settings - Apps - Look for Gear wearable, Gear Plugin and Samsung Accessory services and uninstall all). If Gear Wearable Installed as System App then find it and Delete from system first)
- Sign hack mod must included in ROM
Installation :
Download all three apks from below link and Install as regular apk. (it should meets all requirement as said above)
https://www.mediafire.com/folder/x874z62e92zx9/Gear
PS : At presently all apks are latest. If any updates available you can update and if that breaks connection, let me know, I may update packages if requires (Provided samsung haven't patched it again )
Thanks Dr
thanks to Dr. but it doesnt work on my N9. "paired" on the PHONE but actually stuck on the pairing screen on GEAR
B.Chatt said:
thanks to Dr. but it doesnt work on my N9. "paired" on the PHONE but actually stuck on the pairing screen on GEAR
Click to expand...
Click to collapse
Uninstall all the app you have installed related to gear
Open bluetooth settings - select setting symbol beside gear - Unpair
Install my patched apks - connect device and it should work
If still issue you can reset gear and clean install ROM, more that this nothing I can fix if something missing on your ROM.
samsung accessory apk doesn't install for me. the other two do though
freeza said:
samsung accessory apk doesn't install for me. the other two do though
Click to expand...
Click to collapse
1.If you already have one installed then first uninstall it
2.Your ROM must have sign hacked mod included.
freeza said:
samsung accessory apk doesn't install for me. the other two do though
Click to expand...
Click to collapse
same issue
You are a gentleman and a scholar
I have DrKetan Rom for N9 and I can't even run the Gear app, it says my device is modified.
@drketan
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inviato dal mio SM-N960F utilizzando Tapatalk
Hi Doc
If i put these Apps into the preload folder they should be installed correct while flashing right ?
störte said:
Hi Doc
If i put these Apps into the preload folder they should be installed correct while flashing right ?
Click to expand...
Click to collapse
It should get install but only if clean installed.
energyword said:
@drketan
Inviato dal mio SM-N960F utilizzando Tapatalk
Click to expand...
Click to collapse
You can update from store
this worked perfectly
Thanks Doc.
how can we check if "Sign hack mod" is available ???
kellox said:
how can we check if "Sign hack mod" is available ???
Click to expand...
Click to collapse
After installing apps (said in op) when you open gear wearable, it will throw error if sign hack not applied in rom
If some one have the skills... An flashable. ZIP version. would be nice.
i can not install any of these apps ?
this works but has its downside but it doesn't matter.
pcxnet said:
I have DrKetan Rom for N9 and I can't even run the Gear app, it says my device is modified.
Click to expand...
Click to collapse
Same here ; (
---------- Post added at 11:08 PM ---------- Previous post was at 10:55 PM ----------
Even the gear s pluging I cant install. Btw I have gear 2.
Thanks dr!
davicito13 said:
Same here ; (
---------- Post added at 11:08 PM ---------- Previous post was at 10:55 PM ----------
Even the gear s pluging I cant install. Btw I have gear 2.
Thanks dr!
Click to expand...
Click to collapse
You don't need this on my rom. Simply clean install rom and try connecting with gear. It will Auto install required package from store.

Update Oreo B04, A2017GV1.3.0B04

According to some sources, the update came out.
There are april security patches, daydream and improvments.
I have B03 and I don't have any update via fota.
Any news, SD update source?
https://www.z-union.eu/thread/853-axon-7-firmware-1-3b04-daydream/?postID=4450#post4450
https://www.android-hilfe.de/forum/...3281/a2017-g-oreo-8-0-ota.893361-page-24.html
great
we are hope for a new SLIM ROM from @raystef66 and we need the fingerprint for @Didgeridoohan Magisk Module :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WTF, april the 1st....
---------- Post added at 10:46 PM ---------- Previous post was at 10:36 PM ----------
So if someone happens to get an OTA, how do you capture it on a non rooted, stock phone?
RobboW said:
WTF, april the 1st....
---------- Post added at 10:46 PM ---------- Previous post was at 10:36 PM ----------
So if someone happens to get an OTA, how do you capture it on a non rooted, stock phone?
Click to expand...
Click to collapse
you can logcat the download link
I do not have nothing.. still waiting.. on B03
Does it support gcam natively???
rzarectha said:
you can logcat the download link
Click to expand...
Click to collapse
I see that you are from Romania. I am going to speak in english, because this is a english speaking board.
If you are on Digi.Mobil network can you tell me if you can enable VoLte on this network with this update, when you install it on your device?
Right now i am on Android 7.1.1 B10 and its ok for me. I tried android 8 and i didnt like it, but i would switch only if VoLte will work with Digi.Mobil
Tnx in advance:good:
dumyro said:
I see that you are from Romania. I am going to speak in english, because this is a english speaking board.
If you are on Digi.Mobil network can you tell me if you can enable VoLte on this network with this update, when you install it on your device?
Right now i am on Android 7.1.1 B10 and its ok for me. I tried android 8 and i didnt like it, but i would switch only if VoLte will work with Digi.Mobil
Tnx in advance:good:
Click to expand...
Click to collapse
Sure thing!
I am on digi so I can confirm this for you but I'm waiting for the update.
So far nobody has a download link to it
I'm still wondering if it's a hoax. That picture showed 1st of April as the date.
RobboW said:
I'm still wondering if it's a hoax. That picture showed 1st of April as the date.
Click to expand...
Click to collapse
That's the date for the April security patch. B03 is 1st of November.
It is a bit weird though that nobody got the file in 3 days, I'll give you that.
rzarectha said:
That's the date for the April security patch. B03 is 1st of November.
It is a bit weird though that nobody got the file in 3 days, I'll give you that.
Click to expand...
Click to collapse
Some of us went back to B02 to obtain and logcat it but till now no sign of life of the B04. Previous ones, I grabbed within a few minutes....so a bit weird this one doesn't show up...
Keep you updated when it does.
Why do you have to go back to B02?
RobboW said:
Why do you have to go back to B02?
Click to expand...
Click to collapse
The update is being rolled out for the German rom first, that's the 02.
03 is Russian
https://www.facebook.com/groups/1760229210896622/
svsavic said:
https://www.facebook.com/groups/1760229210896622/
Click to expand...
Click to collapse
Nice to show it to us but just adb logcat it and share the file
so : adb logcat > B04.txt
run and press the download - in your adb folder you can grab the B04.txt where you can find the link
raystef66 said:
Nice to show it to us but just adb logcat it and share the file
so : adb logcat > B04.txt
run and press the download - in your adb folder you can grab the B04.txt where you can find the link
Click to expand...
Click to collapse
@svsavic can also extract the zip by downloading it only but not installing it.
I don't remember the location tho where it gets downloaded to. I think it's either in root directory or inside /cache/fota
FYI, I have checked every single entry for Axon 7(OPEN MARKET) from https://www.ztedevices.com/en/support for all contries and the update is not present on that website.
I'm letting you know to save you from wasting a lot of time (I did it at work )
PS:
I have also tried editing this link to kind of guess the new update location:
https://dleu.ztems.com/zxmdmp/downl...ZTE A2017G/191686/P996A04V1.3.0B13_MR2_SD.zip
no success but maybe someone can explore "brute forcing" the link
hey everything together here you have the official b04 as download:
https://drive.google.com/file/d/10fsM2GKlbG-ZSd7d2HXQCPqO3McBNief/view?usp=drivesdk
Hello, how do you install this kind file ? With ADB ? Thanks
Envoyé de mon ZTE A2017G en utilisant Tapatalk

Categories

Resources