Hi All,
I am having a real headache with my Samsung galaxy s6 been bricked, I will explain what happened and what I have done so far
I rooted my phone and installed a custom rom, upon the phone booting up it just boot looped so I tried to flash it back to stock and then the problem started.
I can get in to download mode and when I try and flash a stock rom file it fails at NAND wipe, the phone displays something about SW Rev Binary 4 phone 1, I have managed to flash the modem.bin file and can get in to recovery but that displays another message something like dm verify verification failed.
So now I am at a loss, I have even tried to flash a new pit file but just fails at NAND stage in odin.
Any help would be great.
P.S the phone it locked to o2 so I have tried o2 and the BTU stock roms.
darthlinux said:
Hi All,
I am having a real headache with my Samsung galaxy s6 been bricked, I will explain what happened and what I have done so far
I rooted my phone and installed a custom rom, upon the phone booting up it just boot looped so I tried to flash it back to stock and then the problem started.
I can get in to download mode and when I try and flash a stock rom file it fails at NAND wipe, the phone displays something about SW Rev Binary 4 phone 1, I have managed to flash the modem.bin file and can get in to recovery but that displays another message something like dm verify verification failed.
So now I am at a loss, I have even tried to flash a new pit file but just fails at NAND stage in odin.
Any help would be great.
P.S the phone it locked to o2 so I have tried o2 and the BTU stock roms.
Click to expand...
Click to collapse
Sw rev just shows up because the phone is rooted.
As for dm verity that is your imei messed up.
When flashing a custom rom you must always back up efs files which is your imei.
Its a ball ache reviving messed up imei without efs backup.
What i would suggest is boot to recovery and wipe cache partition, wipe data/ reset. Then try to flash stock again. I would flash 02 stock firmware 1st.
If no luck flash latest BTU firmware with zerolte_eur_open pit.
Post a screenshot of odin if you can
Sent from my SM-G925F using Tapatalk
which PIT file would you say would be best out of these
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
darthlinux said:
which PIT file would you say would be best out of these
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
Click to expand...
Click to collapse
It depends which firmware you are flashing? Do not flash a random pit!!
Tell me the firmware and i can tell you the pit
the BTU one for united kingdom
I found the correct zip and tried the BTU firmware and got this
darthlinux said:
the BTU one for united kingdom
Click to expand...
Click to collapse
Zerolte_eur_open
callumbr1 said:
Zerolte_eur_open
Click to expand...
Click to collapse
I have tried this and got this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
darthlinux said:
the BTU one for united kingdom
Click to expand...
Click to collapse
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
darthlinux said:
I have tried this and got this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What firmware are you flashing? G925fxxxxxx?
Try this
http://www.sammobile.com/firmwares/download/90724/G925FXXU4DPGW_G925FBTU4DPH1_BTU/
With this PIT
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Ok thank you I managed to flash this but it stuck in a bootloop again and I have wipe the cache and did a factory reset
Ok scrap that turns out the phone had no charge, so I have charged it up for alittle while and its booted up fine and is working again, thank you so much my S6 is back to normal
darthlinux said:
Hi All,
I am having a real headache with my Samsung galaxy s6 been bricked, I will explain what happened and what I have done so far
I rooted my phone and installed a custom rom, upon the phone booting up it just boot looped so I tried to flash it back to stock and then the problem started.
I can get in to download mode and when I try and flash a stock rom file it fails at NAND wipe, the phone displays something about SW Rev Binary 4 phone 1, I have managed to flash the modem.bin file and can get in to recovery but that displays another message something like dm verify verification failed.
So now I am at a loss, I have even tried to flash a new pit file but just fails at NAND stage in odin.
Any help would be great.
P.S the phone it locked to o2 so I have tried o2 and the BTU stock roms.
Click to expand...
Click to collapse
Did you already managed to fix your S6 edge Sir? Because it's happening to my S6 edge right now. I don't have any Idea what to do
darthlinux said:
Ok scrap that turns out the phone had no charge, so I have charged it up for alittle while and its booted up fine and is working again, thank you so much my S6 is back to normal
Click to expand...
Click to collapse
No problem leave a thanks on my post mate
---------- Post added at 06:34 AM ---------- Previous post was at 06:34 AM ----------
vadess020514 said:
Did you already managed to fix your S6 edge Sir? Because it's happening to my S6 edge right now. I don't have any Idea what to do
Click to expand...
Click to collapse
Read up a few posts.
Whats the issue?
callumbr1 said:
No problem leave a thanks on my post mate
---------- Post added at 06:34 AM ---------- Previous post was at 06:34 AM ----------
Read up a few posts.
Whats the issue?
Click to expand...
Click to collapse
I think I bricked my phone. I tried various steps on how to fixed it but didn't work out! What's bodering me about is I coudn't boot it in recovery mode no matter how hard I tried. I also did flash a twrp but didn't work also. Plsss help me
vadess020514 said:
I think I bricked my phone. I tried various steps on how to fixed it but didn't work out! What's bodering me about is I coudn't boot it in recovery mode no matter how hard I tried. I also did flash a twrp but didn't work also. Plsss help me
Click to expand...
Click to collapse
Can you get into download mode?
callumbr1 said:
Can you get into download mode?
Click to expand...
Click to collapse
Yes sir. I used udin to flash a twrp. But still I can't boot to recovery mode.
vadess020514 said:
Yes sir. I used udin to flash a twrp. But still I can't boot to recovery mode.
Click to expand...
Click to collapse
What firmware was you on before?
What android version?
What region?
What was you doing before it all went wrong?
callumbr1 said:
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
What firmware are you flashing? G925fxxxxxx?
Try this
http://www.sammobile.com/firmwares/download/90724/G925FXXU4DPGW_G925FBTU4DPH1_BTU/
With this PIT
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Click to expand...
Click to collapse
Thank you so much! This worked perfectly! After hours of me searching and worrying I'd have to sell my phone I followed this and it's working! Thank you so much!
BeastmodeHDD said:
Thank you so much! This worked perfectly! After hours of me searching and worrying I'd have to sell my phone I followed this and it's working! Thank you so much!
Click to expand...
Click to collapse
Glad it helped mate
Help
callumbr1 said:
It depends which firmware you are flashing? Do not flash a random pit!!
Tell me the firmware and i can tell you the pit
Click to expand...
Click to collapse
Please help me which pit should i use I have s6 edge and i was flashing stock rom and it failed at hidden.img. I am using this firmware.
Country/Carrier Version PDA CSC
Pakistan (PAK) 7.0 G925FXXS5ERB6 G925FOJV5EQL1
Related
<ID:0/040> Removed!!
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100GZCKH4_CL484595_REVr07_user_low_ship.t ar.md5 is valid.
<OSM> CODE_I9100GZCKH4_CL484595_REVr07_user_low_ship.tar .md5 is valid.
<OSM> MODEM_I9100GZCKH4_REV_00_CL1050825.tar.md5 is valid.
<OSM> GT-I9100G-CSC-MULTI-OZHKH4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Set PIT file..
<ID:0/040> DO NOT TURN OFF TARGET!!
<ID:0/040> Get PIT for mapping..
<ID:0/040> Firmware update start..
<ID:0/040> MLO
<ID:0/040> NAND Write Start!!
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any solution ?
hey quickgsm
are you using a Chinese version of i9100g.because flashing chinese firmware with odin will only work for chinese i9100g not i9100g of any other country.post details about your i9100g.
darkshadow1997 said:
hey quickgsm
are you using a Chinese version of i9100g.because flashing chinese firmware with odin will only work for chinese i9100g not i9100g of any other country.post details about your i9100g.
Click to expand...
Click to collapse
i try to flash by many firmware if i use I9100GXXLPN_I9100GXEFLPN_XEF_2 or I9100GXXLPN_XEFLPN_France_Android_4.0.3 flash working 100% but phone stuck on samsung logo and if i use this firmware I9100GZCKH4 i jet error :
<ID:0/040> Firmware update start..
<ID:0/040> MLO
<ID:0/040> NAND Write Start!!
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS : my I9100G from france
why did you tick repartition for? un-tick taht option
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
omg why did you tick all????
only tick PDA file and put in the firmware
ad_ek said:
why did you tick repartition for? un-tick taht option
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
omg why did you tick all????
only tick PDA file and put in the firmware
Click to expand...
Click to collapse
same issue if i don't tick repartition
quickgsm said:
same issue if i don't tick repartition
Click to expand...
Click to collapse
only tick the pda
nothing else
n try to flash a gb firmware firstly and thn try to flash ics
Devices-
Samsung galaxy s2 i9100g (Cm9-Nightly build)
sony walkman 8 ( Cm9 Stable )
Blackberry 9300 cracked for bbm
Press thnks if i tried to help
im not sure which guide you are following. but the normal procedure to flash firmware with odin is only using ODIN is to only tick the PDA option. and insert the firmware file which you have downloaded.. im trying to
help you ...but if you are getting mad...its ok. you can find your way.
ad_ek said:
im not sure which guide you are following. but the normal procedure to flash firmware with odin is only using ODIN is to only tick the PDA option. and insert the firmware file which you have downloaded.. im trying to
help you ...but if you are getting mad...its ok. you can find your way.
Click to expand...
Click to collapse
yup your right ad_ek ..just use the pda option and dont touch other thing...can your phone boot to eg: recovery or download mode?use pit only when your phone is in soft brick state..if fail again try reboot your pc/change usb port and try again
Wonder why OP tick so many for what. Just tick PDA.. that it. Don't touch other things.
PIT only required if your phone is softbrick.
Chinese ROM
Looks like you have a Chinese phone with the locked bootloader, go back to stock for now.
-delete-
In my case it is only one file .tar.md5 can fix soft brick ?!!
i think it's better to flash a 3 part, since sometimes in a soft brick, a single files doesn't work , but a 3 file can fix soft brick
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
quickgsm said:
In my case it is only one file .tar.md5 can fix soft brick ?!!
i think it's better to flash a 3 part, since sometimes in a soft brick, a single files doesn't work , but a 3 file can fix soft brick
Click to expand...
Click to collapse
Sorry, but just flash the tar.md5 file as pda in odin. I really suggest not to think but to follow the instructions given.
quickgsm said:
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
Click to expand...
Click to collapse
Try to find the stock kernel for the chinese ICS...last time i had this situation i was able to flash the kernel even i could not get in download mode.
Don't panic. I am sure that the ppl around will help you so that you don't come out with an expensive paperweight
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPN_I9100GXXLPN_I9100GXEFLPN_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> MLO
<ID:0/010> NAND Write Start!!
<ID:0/010> Sbl.bin
<ID:0/010> param.lfs
<ID:0/010> factoryfs.img
<ID:0/010> zImage
<ID:0/010> modem.bin
<ID:0/010> cache.img
<ID:0/010> hidden.img
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Removed!!
phone still show Samsung galaxy S2 GT-I9100G can help me to fix it ?
Which is your problem right now?
Yesterday I was flashing with Odin v1.85 and it was a total mess. I had NAND Write error like you had. I downloaded Odin v1.7 and I got my S2 back alive.
But with your last log, it flashed, so I don't understand what's your problem. Doesn't boot?
antonio1475 said:
Which is your problem right now?
Yesterday I was flashing with Odin v1.85 and it was a total mess. I had NAND Write error like you had. I downloaded Odin v1.7 and I got my S2 back alive.
But with your last log, it flashed, so I don't understand what's your problem. Doesn't boot?
Click to expand...
Click to collapse
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
quickgsm said:
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
Click to expand...
Click to collapse
It just keeps in the first boot screen with/without a yellow triangle and the name Samsung and the model in white letters?
Please be a little more clear and descriptive so we can be sure what you are talking about
my problem :
the phone got stuck at boot up screen after the update showing the message Samsung Galaxy S2 GT-I9100G. Please provide the solution for this.
quickgsm said:
my problem :
the phone got stuck at boot up screen after the update showing the message Samsung Galaxy S2 GT-I9100G. Please provide the solution for this.
Click to expand...
Click to collapse
OK. So download a stock firmware for your model, which I guess you already have by the first post, and download Odin v1.7 (http://www.mediafire.com/?jyyux6yxem8uojn).
Use Odin v1.7 to flash just PDA (the CODE file). If doesn't boot (if it says error flashing let me know), try changing USB port (remember to reboot the device in download mode each time you want to flash with Odin).
If not, add the other files but without PIT. Finally if it doesn't boot, try with PIT too.
Let me know your progress. Best luck
Hi Guys.
I uninstalled some apps on my rooted I9300 and went to bed. When i woke up, the boot logo was stuck.
The only thing i can access is Download-mode (Volume-down + Home + Power).
I think the only way to get my phone up and running again, is through Odin (please correct me if I'm wrong)
What i have tried to resolve the issue:
- Tried downloading stock firmware from Sammobile.com and adding it in Odin v1.85, v3.04 and v3.07: Result: There is no PIT partition. v3.07 stopped at "SetupConnection.."
- Tried downloading rescue firmware here: http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6. The package included Bootloader, PDA, PHONE and CSC files. Tried running them through Odin, first with "Re-Partition" unticked - Failed. Then i tried with "Re-partition" ticked, and got this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
- I tried downloading KIES, to check if my phone connected, but it doesn't.
I just need to access CWM recovery so i can install a ROM, but when I hold Volume Up + Power, it shows the boot logo after a while and it stays there..
Im fairly new to Android, but I hope you guys have some tips for me.
This thread looks like a similar problem
http://forum.xda-developers.com/showthread.php?t=1785481
maatsby said:
This thread looks like a similar problem
http://forum.xda-developers.com/showthread.php?t=1785481
Click to expand...
Click to collapse
I can't find a solution in this thead. The firmware i downloaded from Sammobile.com did not include a .pit file, just one large tar.md5 file.
When using this in Odin i get the "There is no PIT partition" error.
nubz2k said:
I can't find a solution in this thead. The firmware i downloaded from Sammobile.com did not include a .pit file, just one large tar.md5 file.
When using this in Odin i get the "There is no PIT partition" error.
Click to expand...
Click to collapse
What's inside the tar file? Can you extract it and put each of the separate bits in to their own boxes in odin?
---------- Post added at 10:44 PM ---------- Previous post was at 10:41 PM ----------
You said you're keen to just get in to recovery, can u flash a recovery in odin and then use adb commands to get there? adb reboot recovery
http://forum.xda-developers.com/showthread.php?t=1796062
maatsby said:
What's inside the tar file? Can you extract it and put each of the separate bits in to their own boxes in odin?
You said you're keen to just get in to recovery, can u flash a recovery in odin and then use adb commands to get there? adb reboot recovery
Click to expand...
Click to collapse
Tried flashing Recovery-clockwoork...-i9300.tar now, but it keeps saying that there is no PIT partition
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
As far as I know, there is no point to adb without a recovery to boot?
What's inside the tar file? Can you extract it and put each of the separate bits in to their own boxes in odin?
Click to expand...
Click to collapse
Just a bunch of folders. Nothing looks like something i can put in Odin's boxes.
JJEGAN:
Can't extract the PIT file with Heimdall
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
Click to expand...
Click to collapse
nubz2k said:
Just a bunch of folders. Nothing looks like something i can put in Odin's boxes.
JJEGAN:
Can't extract the PIT file with Heimdall
Click to expand...
Click to collapse
Probably supposed to flash the three parts dont know i steer clear of Pits .
jje
JJEgan said:
Probably supposed to flash the three parts dont know i steer clear of Pits .
jje
Click to expand...
Click to collapse
The rescue firmware i downloaded included 3 parts + PIT file, but when i try to flash just the 3 parts, without the PIT, it fails.
Giving up! I've read through countless forums, and no one has a solution as long as the "Re-Partition operation failed." error shows in Odin.
RMA'ing the phone tomorrow.:crying:
Try firmware initialzation within KIES. You will be prompted for the model and serial number and voilá!!!! New
Flashing going under it's way!!!
Sent from my GT-I9300 using xda premium
worf_1977 said:
Try firmware initialzation within KIES. You will be prompted for the model and serial number and voilá!!!! New
Flashing going under it's way!!!
Click to expand...
Click to collapse
My device isn't recognized by KIES while in downloading mode. Is it supposed to? I've tried downloading the drivers, different cables and pc's.
Got any tips on how to get KIES to detect my phone?
Try re installing USB Drivers for samsung phones...
Sent from my GT-I9300 using xda premium
worf_1977 said:
Try re installing USB Drivers for samsung phones...
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Tried it. The drivers are installed. Odin and Heimdall detects it, but KIES doesn't.
Then try to follow firmware initialization steps, and then, and only then, connect the phone... It will look for your terminal in download mode and update it.
Sent from my GT-I9300 using xda premium
worf_1977 said:
Then try to follow firmware initialization steps, and then, and only then, connect the phone... It will look for your terminal in download mode and update it.
Click to expand...
Click to collapse
Tried it. KIES downloads the firmware and fails at apx 69% telling me that "firmware initialization failed".
send it in
Already packed and ready for shipment.
Update:
The service department stated that they had to replace the mainboard on my phone.
I don't know if they noticed that the device was rooted and had a custom ROM, but it was covered by warranty and they are sending it back with no charge
How lucky you are then!!! Congrats and enjoy the new phone, whenever arrives
Sent from my GT-I9300 using xda premium
I had this problem with ODIN 3.10.6
Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU2COF8_G925IODD2COF8_G925IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I want to update my firmware to Lollipop 5.1.1, I have Lollipop 5.0.2 and my carrier is WIND MOBILE (Canada).
I´ve used the Indian stock rom from sammmobile and I´ve tried with other pc, other port usb, other cable and always is the same problem. What can I do? Please help me. Thanks.
Is the phone still locked?? Is the same csc that you're trying to flash??
marcochapita said:
Is the phone still locked?? Is the same csc that you're trying to flash??
Click to expand...
Click to collapse
No, I´m using Stock rom from India and my stock rom is from Canada, so, is not the same CSC. And are you talking about that my phone is locked to others companies? If is that, the reply is YES, still locked.
jonmagia said:
No, I´m using Stock rom from India and my stock rom is from Canada, so, is not the same CSC. And are you talking about that my phone is locked to others companies? If is that, the reply is YES, still locked.
Click to expand...
Click to collapse
if you are using a ROM form a different country, it could be built for a different Variant.
Try a Canadian Stock 5.1.1 ROM.
Word of warning, you cannot Downgrade from 5.1.1 to 5.0.2
Mischala said:
if you are using a ROM form a different country, it could be built for a different Variant.
Try a Canadian Stock 5.1.1 ROM.
Word of warning, you cannot Downgrade from 5.1.1 to 5.0.2
Click to expand...
Click to collapse
Yeah, the problem is: We haven´t Lollipop 5.1.1 in Canada yet.
Odin stuck in NAND Write
I m also having same problem Odin stuck in NAND Write.
I have used odin 3.10.6 and 3.10.7 that too on 2 PCs and also tried rebooting PC but nothing worked.
I tried flashing Original FW as well as Upgrade ie 5.1.1. but result is still Fail in NAND write. Smart switch says G9250 doesn't support initialisation
Plz help
My phone is SM-G9250, CSC-TGY.
This might sound crazy but I had the same problem and I had a defective new Samsung USB cable!
I spent hours trying to flash stock firmware!
Only when I used another cable Odin 3.10.6 passed first time!
Solution!
Try to wipe everything on your phone via CUSTOM RECOVERY, DONT WIPE YOUR SDCARD!!! (do not touch the odin settings unless you exactly know what they do!)
Try TWRP:
TWRP: twrp.me/Devices/
This will most likely work because then it will clean flash/install your rom.
jonmagia said:
No, I´m using Stock rom from India and my stock rom is from Canada, so, is not the same CSC. And are you talking about that my phone is locked to others companies? If is that, the reply is YES, still locked.
Click to expand...
Click to collapse
If you have the phone locked, i think that you can't flash anything unless you unlock the bl. Try to flash the stock rom with a oldest version of ODIN (ex 3.07/3.00 or oldest...)
Hello,
I borrowed my roommates Verizon S4 (SCH-I545) and I soft-bricked it. I had a different carrier and needed to root/unlock it, and after a day I was unable to send texts or use data, so I tried to install a recovery to flash a ROM.
However, once I tried to install a recovery, it would not longer boot and would say "Software Update Failed" and it tells me to use the Verizon Software Repair Assistant.
So, I tried using Odin to flash the stock, but I ran into trouble because this phone is on 5.0.1. On Odin, I would have the COM marker light up yellow, so I know the phone was at least recognized.
I also tried to find a Verizon Repair exe file (using windows), and I think I found one for Samsung, but it does not recognize the device being connected (even though Odin does)
Is there anything I can do to save this phone and return it to my roommate?
Fail Log:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shivpaulchadha said:
Hello,
I borrowed my roommates Verizon S4 (SCH-I545) and I soft-bricked it. I had a different carrier and needed to root/unlock it, and after a day I was unable to send texts or use data, so I tried to install a recovery to flash a ROM.
However, once I tried to install a recovery, it would not longer boot and would say "Software Update Failed" and it tells me to use the Verizon Software Repair Assistant.
So, I tried using Odin to flash the stock, but I ran into trouble because this phone is on 5.0.1. On Odin, I would have the COM marker light up yellow, so I know the phone was at least recognized.
I also tried to find a Verizon Repair exe file (using windows), and I think I found one for Samsung, but it does not recognize the device being connected (even though Odin does)
Is there anything I can do to save this phone and return it to my roommate?
Click to expand...
Click to collapse
Do you know what baseband version is on the phone? When Odin initially failed for me it was because the phone was running 5.0.1 and I tried installing the earliest software. Then I downloaded the newest firmware (OF1) and flashed it successfully.
Snowby123 said:
Do you know what baseband version is on the phone? When Odin initially failed for me it was because the phone was running 5.0.1 and I tried installing the earliest software. Then I downloaded the newest firmware (OF1) and flashed it successfully.
Click to expand...
Click to collapse
can u give me the link Firmware OF1 pls :'(
AnggaKun said:
can u give me the link Firmware OF1 pls :'(
Click to expand...
Click to collapse
Turns out I could not find the firmware on here to download so I went too the site SamMobile and performed the painfully slow download from there
Snowby123 said:
Turns out I could not find the firmware on here to download so I went too the site SamMobile and performed the painfully slow download from there
Click to expand...
Click to collapse
when im download at sammobile, the file when im wanna ekstract it always corrupt file
help me im got bootloop on of1, can if im try instal oc1 firmware?:good:
AnggaKun said:
when im download at sammobile, the file when im wanna ekstract it always corrupt file
help me im got bootloop on of1, can if im try instal oc1 firmware?:good:
Click to expand...
Click to collapse
Installing an older firmware likely will fail. Moreover, your download was likely incomplete. That is the most common cause of the file being labeled corrupt. There are other sites you could find the firmware , but the other sites have a weaker reputation
Snowby123 said:
Installing an older firmware likely will fail. Moreover, your download was likely incomplete. That is the most common cause of the file being labeled corrupt. There are other sites you could find the firmware , but the other sites have a weaker reputation
Click to expand...
Click to collapse
im trying to flash.. but stuck
log odin
[/COLOR]<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
stuck in there
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
supergoose360 said:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
cm.bin
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
Click to expand...
Click to collapse
Smart switch is way better than odin.
Sent from my SM-G925F
supergoose360 said:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
Click to expand...
Click to collapse
Flash one of these g925f BTU firmwares.
Will work mate.
Or did you use cf autoroot? If so just flash the root again
http://www.sammobile.com/firmwares/database/SM-G925F/BTU/
[U,[/U]
callumbr1 said:
Flash one of these g925f BTU firmwares.
Will work mate.
Or did you use cf autoroot? If so just flash the root ]
Click to expand...
Click to collapse
Thanks will try this! Any idea as to why it fails on cm.bin?
supergoose360 said:
[U,[/U]
Thanks will try this! Any idea as to why it fails on cm.bin?
Click to expand...
Click to collapse
Is the firmware you tried to flash same as before? 6.0.1?
It can happen when trying to downgrade or bootloader locked. What rooted firmware was you on before? And what did you try to flash?
cm = Cryptography Manager. Preventing flashing previous builds is implemented in sboot.bin
The firmware you tried to flash was lower build than the firmware you was on?
callumbr1 said:
Is the firmware you tried to flash same as before? 6.0.1?
It can happen when trying to downgrade or bootloader locked. What rooted firmware was you on before? And what did you try to flash?
cm = Cryptography Manager. Preventing flashing previous builds is implemented in sboot.bin
The firmware you tried to flash was lower build than the firmware you was on?
Click to expand...
Click to collapse
I was on 6.0.1, i tried to flash with stock 6.0.1 on ee to get out of bootloop.
supergoose360 said:
I was on 6.0.1, i tried to flash with stock 6.0.1 on ee to get out of bootloop.
Click to expand...
Click to collapse
Was you on ee firmware before?
callumbr1 said:
Was you on ee firmware before?
Click to expand...
Click to collapse
The phone came with an ee sim card so i can only assume so.
supergoose360 said:
The phone came with an ee sim card so i can only assume so.
Click to expand...
Click to collapse
Did you get it direct from ee?
callumbr1 said:
Did you get it direct from ee?
Click to expand...
Click to collapse
It was a gift so i cannot say for sure.
Just flashed 6.0.1 BTU and got the same error on odin.
And now my phone shows "use emergency recovery function in smart switch" smart swith (latest version) does not connect to device. Also Thanks for your help so far!
supergoose360 said:
It was a gift so i cannot say for sure.
Just flashed 6.0.1 BTU and got the same error on odin.
And now my phone shows "use emergency recovery function in smart switch" smart swith (latest version) does not connect to device. Also Thanks for your help so far!
Click to expand...
Click to collapse
Did you try to flash this one...
http://www.sammobile.com/firmwares/download/82651/G925FXXS4DPG2_G925FBTU3DPD2_BTU/
Also what error did you get this time? Dont worry the phone isnt bricked. Just need to work out and flash the correct firmware. If that didnt work try the XEU firmware
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
callumbr1 said:
Did you try
Also what error did you get this time? Dont worry the phone isnt bricked. Just need to work out and flash the correct firmware. If that didnt work try the XEU firmware
Click to expand...
Click to collapse
Cm.bin
FAIL!
i flashed using:
PDA G925FXXU3DPDP
CSC G925FBTU3DPD2
Also i forgot to mention before i did the last flash my device was recognised by my laptop and popped up as SM-G925S which is korean but my phone box says SM-G925F
supergoose360 said:
Also i forgot to mention before i did the last flash my device was recognised by my laptop and popped up as SM-G925S which is korean but my phone box says SM-G925F
Click to expand...
Click to collapse
Then that will be why the cm.bin fail. It is a g925s. What does it say on the back of the phone? It should be printed on it?
callumbr1 said:
Then that will be why the cm.bin fail. It is a g925s. What does it say on the back of the phone? It should be printed on it?
Click to expand...
Click to collapse
It says g925f but thats because i recently replaced the back due to damage. Is it possible ive chaned the info of the phone so its showing sm-g925s?
supergoose360 said:
It says g925f but thats because i recently replaced the back due to damage. Is it possible ive chaned the info of the phone so its showing sm-g925s?
Click to expand...
Click to collapse
No you cant change the info to make it say a different model. Can you get into recovery? Turn off phone. Then hold home +up + power button?
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number
callumbr1 said:
No you cant change the info to make it say a different model. Can you get into recovery? Turn off phone. Then hold home +up + power button?
Click to expand...
Click to collapse
Sorry i cannot do that. Will this be a problem?
supergoose360 said:
Sorry i cannot do that. Will this be a problem?
Click to expand...
Click to collapse
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number?
callumbr1 said:
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number?
Click to expand...
Click to collapse
It is no longer recognised by the comouter in its current state.
supergoose360 said:
It is no longer recognised by the comouter in its current state.
Click to expand...
Click to collapse
Ok i just flashed twrp recovery and now its in recovery mode and has come up on the computer.
SM-G925S
Firmware version 1.0
Not sure if i should type my serial in here.