just curious to know what if any of the internals have major differences...such as the logic board or speaker setup that would prevent a front assembly (housing and LCD assembly) from a international HOX+ being used on a AT&T/Telus varient?
Related
I've got an ATT HTC One X and there is a disappointing lack of accessories that use the 5 pogo pins on the back.
I was told that my phone would be a flagship, supported for a long time and third parties will make interesting accessories.
There is only two accessories that use the pogo pins on the ATT version, both are extended battery cases.
There are 0 HTC made accessories for the ATT HTC one X
When cases and or accessories are made for the HTC One X+ or One XL+ will I be able to use them with my phone?
I would really love a keyboard case or a gamepad case.
I saw on Engadget that this is the same as the current version and I believe they said its the same as the US version which is a disappointment since the pins won't line up with the docks made for the international version...
http://www.engadget.com/2012/10/04/htc-one-x-for-atandt-hands-on-tegra-3-lte-and-jelly-bean-togeth/
MG
Yes, I bought my AT&T One X+ the same day my sister bought her One X and we both swap cases all the time. They both have the same shell. You should be able to use One X+ accessories with your One X no problems whatsoever!
Includes Charging cases
joey-pagan said:
Yes, I bought my AT&T One X+ the same day my sister bought her One X and we both swap cases all the time. They both have the same shell. You should be able to use One X+ accessories with your One X no problems whatsoever!
Click to expand...
Click to collapse
Hey I would like yo know if this includes charging cases as well?
scarletbaron said:
Hey I would like yo know if this includes charging cases as well?
Click to expand...
Click to collapse
It should.
Thanks! :good:
joey-pagan said:
It should.
Click to expand...
Click to collapse
This question has already been answered several times.
Please look in the Accessories thread...
Assuming the HOX and HOX+ have the same dimensions, would the HOX cases fit the HOX+ ?
I don't see why they wouldn't.
I'm sure they will (at least I hope so, I've bought 2)
Sent from my HTC Desire
I've heard that it has the same dimensions as the One XL / AT&T one X
See my thread with the same question here.
http://forum.xda-developers.com/showthread.php?t=1921183
Hello, I have bought myself a HTC One X+ AT&T version yesterday.
The cases that were being sold for the One X+ at the AT&T store weren't too elegant, and I would like to know whether or not:
The International One X+ cases will fit with the AT&T One X+,
The International One X cases will fit with the AT&T One X+, and
The AT&T One X cases will fit with the AT&T One X+.
Also, would the extended battery cases for the International One X fit with the AT&T One X+?
I am sorry if I am posting this thread in the wrong section, I clicked the "Yes, this thread is a Question!" checkbox before posting in the accessories forum and it told me to post here.
HTC One X and One X+ both have the same dimensions. I know HTC has been quoted as saying they have the same exact body dimensions, but I'm far too lazy to actually find the referfence (as I stumbled on it during a 3am internet binge). But:
From HTC One X spec page
SIZE: 134.36 x 69.9 x 8.9 mm
From HTC One X+ spec page
SIZE: 134.36 x 69.9 x 8.9mm
Also for what it's worth, I had an AT&T HOX that I'd bought a case for a week before they announced the HOX+ release. I returned the HOX and ordered an AT&T HOX+. The case fits it perfectly, as does the screen protector. As far as I can tell they have identical exterior dimensions.
I got this skin, - fits perfectly.
http://www.amazon.com/gp/product/B007XPPA0U/
Are there any physical outside dimensional differences between the international & AT&T models? I'm looking into getting a Proclip....but the availability is international specific!
Apparently, according to the international and U.S. HTC websites, here are the sizes:
Int'l HOX+: 134.36 x 69.9 x 8.9mm
AT&T HOX+: 134.8 x 69.9 x 8.99 mm
I also looked at the Proclip website, and they do specify pretty clearly that it is NOT for the AT&T versions. Seeing as the phone is contoured, it is difficult to tell where these slightly differing values will affect the size and the fit of the holders for the marginally larger AT&T version. I'm having a hard time seeing the difference of 0.09 mm in thickness and 0.44 mm in height being very significant (it's nigh on negligible).
I've never seen or used a Proclip in person, so I don't know how much of a fit they craft for their holders. Depending on how tightly it hugs, it would probably serve you just fine.
http://www.ebay.com/itm/HTC-Butterf...Laptop_Screens_LCD_Panels&hash=item337f65bd6f
Hello guys just find that lcd replacement...it has the htc logo upfront so it's propably from the butterfly..will this fit to dna....???my screen is cracked so i am desperately searching for replacement because htc won't repair because i am outside of U.S
Djmk4 said:
http://www.ebay.com/itm/HTC-Butterf...Laptop_Screens_LCD_Panels&hash=item337f65bd6f
Hello guys just find that lcd replacement...it has the htc logo upfront so it's propably from the butterfly..will this fit to dna....???my screen is cracked so i am desperately searching for replacement because htc won't repair because i am outside of U.S
Click to expand...
Click to collapse
From the looks of it, the HTC Butterfly and the DNA aren't the same length. Someone correct me if I'm wrong, but on www.gsmarena.com, they have the DNA listed at 141 mm and the Butterfly listed at 143 mm. Also, if you look at this video, you can see the device size difference meaning the screen won't actually fit the DNA... :/
I look eveywhere and can't find the original DNA screen replacement
4 different Butterflys in 2 different heights
Hi,
All together there are four variants of the HTC Butterfly.
HTC J Butterfly (HTL21) 143 x 71 x 9.2 mm
HTC Butterfly (X920d) 143 x 70.5 x 9.08 mm
HTC Droid DNA 141 x 70.5 x 9.73 mm
HTC Butterfly (X920e) 141mm(L) x 70.5mm(W) x 9.08mm(T)
The Glass should be inter change able between x920e & DROID DNA both at 141 mm tall and the HTL21 & X920d both at 143 mm tall.
A great article comparing the four different versions, with lots of pictures of all four side by side at Engadget.
I just ordered a White with Red buttons X920e Glass/Digitizer/LCD for my Verizon branded DROID DNA by HTC and will let you know how it worked out.
~Hoovie
Hi.
I got my screen(LCD and glass and digitizer combo) advertised for the butterfly x920e and it fit the DROID DNA perfectly.
Pictures here,
http://forum.xda-developers.com/showthread.php?p=44703091
Sent from my HTC6435LVW using xda app-developers app