i managed to debrand my PLK-L01 from C185B370 to C432B100 but i am still have the B370 installed, i already downloaded the C432B380 but i cant seem to flash it. in other word i am stuck, can anyone help ?
Abooodeh said:
i managed to debrand my PLK-L01 from C185B370 to C432B100 but i am still have the B370 installed, i already downloaded the C432B380 but i cant seem to flash it. in other word i am stuck, can anyone help ?
Click to expand...
Click to collapse
The honor tool mentions that the debranding works only on Android 5.0.
Even if honor tool says that it successfully completed the process, nothing actually gets done.
I have checked it myself a day ago.
You need to rollback to Android 5.0 and then use honor tool imho.
Sent from my PLK-L01 using XDA Labs
You can see it here under the model names that it asks for Android 5.0.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
You can see it here under the model names that it asks for Android 5.0.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
well i think you got it wrong, they mean by that if you want to change your model you need to be on android 5.0 but i didnt change the model i only changed the region, my phone model is still PLK-L01.
i did manage to flash system, cust, recovery and boot, the phone booted up and it's now PLK-L01 C432B380 but still cant flash the whole firmware.
thank you for your reply.
Abooodeh said:
well i think you got it wrong, they mean by that if you want to change your model you need to be on android 5.0 but i didnt change the model i only changed the region, my phone model is still PLK-L01.
i did manage to flash system, cust, recovery and boot, the phone booted up and it's now PLK-L01 C432B380 but still cant flash the whole firmware.
thank you for your reply.
Click to expand...
Click to collapse
I have a PLK-L01 with build C185B370, I tried to debrand my phone, everything went as it should, phone rebooted but nothing changed, I still had the same firmware and CUST etc.
And C185B370 booted without a hiccup, theoretically (imo), If my phone had debranded successfully to EU version, it should not boot into ME firmware (just my inference).
May be I am deducing something which is not there but this was my reasoning...
Sent from my PLK-L01 using XDA Labs
muradulislam said:
I have a PLK-L01 with build C185B370, I tried to debrand my phone, everything went as it should, phone rebooted but nothing changed, I still had the same firmware and CUST etc.
And C185B370 booted without a hiccup, theoretically (imo), If my phone had debranded successfully to EU version, it should not boot into ME firmware (just my inference).
May be I am deducing something which is not there but this was my reasoning...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
same here after debranding but go to settings about and check your build it will be C432B100
do as i did, after debranding download the C432B380 then extract the firmware files and flash boot, system, recovery and cust.
my phone now is PLK-L01C432B380 with emui 4.0.1 dont try to flash the whole firmware it wont work, use the unbrick option in the multi tool to flash it. hope it will work for you.
Related
So I've got a PLK-UL00 (The indian version) and am currently on the build number "PLK-UL00C17B188".
Now, I downloaded the update package (UPDATE.APP) for what seems to be EMUI 4.0 (PLK-UL00C675B330).
When I try to install it though, I run into an error in the recovery.
Another thing to mention is, that it states I need B170 or B180 to install EMUI 4.0 - But I run B188.
So is there any way to downgrade to B180 OR upgrade to B330 / EMUI 4.0?
~ Greets.
Lordmau5 said:
So I've got a PLK-UL00 (The indian version) and am currently on the build number "PLK-UL00C17B188".
Now, I downloaded the update package (UPDATE.APP) for what seems to be EMUI 4.0 (PLK-UL00C675B330).
When I try to install it though, I run into an error in the recovery.
Another thing to mention is, that it states I need B170 or B180 to install EMUI 4.0 - But I run B188.
So is there any way to downgrade to B180 OR upgrade to B330 / EMUI 4.0?
~ Greets.
Click to expand...
Click to collapse
Downgrade just with root afaik.
Sent from my Huawei PLK-L01 using XDA Labs
Sebster97 said:
Downgrade just with root afaik.
Sent from my Huawei PLK-L01 using XDA Labs
Click to expand...
Click to collapse
What do you mean by "Downgrade just with root"?
Lordmau5 said:
What do you mean by "Downgrade just with root"?
Click to expand...
Click to collapse
If you want to downgrade your phone you'll have to root your phone first and flash your desired Firmware via CWM.
That's the only method I can think of right now.
Maybe it is even possible to use the "force upgrade"-method with an Firmware older than your current one, but I'm not sure about that one
Greets
Sebster
Sent from my Huawei PLK-L01 using XDA Labs
Sebster97 said:
If you want to downgrade your phone you'll have to root your phone first and flash your desired Firmware via CWM.
That's the only method I can think of right now.
Maybe it is even possible to use the "force upgrade"-method with an Firmware older than your current one, but I'm not sure about that one
Greets
Sebster
Sent from my Huawei PLK-L01 using XDA Labs
Click to expand...
Click to collapse
I am rooted and got TWRP on. I haven't found CWM for the PLK-UL00
Also I wouldn't know *what* to flash if I would have CWM.
hey bro..me too using Indian version but it is-PLK-UL00C675B170. I cant recall if this is the build version when i bought the device.there is no updates available for my device when I check...actually what is the latest build version for indian honor 7 ??
I have PLK-L01C636B130 firmware I am from Egypt and I didn't get any updates yet.
I'd like to update to MM and I don't know if i can use the ROMs on the development section here?
Any help is appreciated
MostafaWahied said:
I have PLK-L01C636B130 firmware I am from Egypt and I didn't get any updates yet.
I'd like to update to MM and I don't know if i can use the ROMs on the development section here?
Any help is appreciated
Click to expand...
Click to collapse
Best way for you will be to use honor multi-tool to debrand your phone to an EU version and then use its updates to update to latest MM build B380.
Alternatively, you can try to find MM build for C636 using the tool provided in the following thread
http://forum.xda-developers.com/honor-7/general/huawei-firmware-finder-team-mt-t3469621/page1
Sent from my PLK-L01 using XDA Labs
muradulislam said:
Best way for you will be to use honor multi-tool to debrand your phone to an EU version and then use its updates to update to latest MM build B380.
Alternatively, you can try to find MM build for C636 using the tool provided in the following thread
http://forum.xda-developers.com/honor-7/general/huawei-firmware-finder-team-mt-t3469621/page1
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Thank you so much for your reply. I will try both of the methods. Can't thank you enough.
MostafaWahied said:
Thank you so much for your reply. I will try both of the methods. Can't thank you enough.
Click to expand...
Click to collapse
Oops, sorry, forgot one thing, you need to be rooted for the first method and as rooting comes after unlocking bootloader (which voids warranty), its best that you use the second method if you are not rooted already.
On the other hand, if you want to root and debrand, follow any of the tutorials online or just ask for help here.
Enjoy...
Sent from my PLK-L01 using XDA Labs
muradulislam said:
Oops, sorry, forgot one thing, you need to be rooted for the first method and as rooting comes after unlocking bootloader (which voids warranty), its best that you use the second method if you are not rooted already.
On the other hand, if you want to root and debrand, follow any of the tutorials online or just ask for help here.
Enjoy...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Thank you again. I am using now Multi tool to root and debrand to EU version and get the update.
MostafaWahied said:
Thank you again. I am using now Multi tool to root and debrand to EU version and get the update.
Click to expand...
Click to collapse
Great... Enjoy the updated honor 7.
Sent from my PLK-L01 using XDA Labs
i am not sure if this works, but if you were to download the latest version, extract update.app and put it into dload folder, restart phone and push vol + vol - as well as power at the same time, wouldn't it force to update the entire phone with all bells and whistles as well?
endrancer said:
i am not sure if this works, but if you were to download the latest version, extract update.app and put it into dload folder, restart phone and push vol + vol - as well as power at the same time, wouldn't it force to update the entire phone with all bells and whistles as well?
Click to expand...
Click to collapse
Yep, it will if he has a firmware for his phone but actually he can not find ome and if there is none, he needs to debrand to another model to be able to install that model's update.
Sent from my PLK-L01 using XDA Labs
http://4pda.ru/forum/index.php?showtopic=678766&st=6140#entry50993905
[STB][6.0][EMUI4] PLK-L01ะก636 - B330
Full + FullOTA
i am not registered or related to that forum, just a one minute google search showed....
---
https://drive.google.com/file/d/0B2A5U8-jb7DZYUk3d1I2NVFFMlk/view
PLK-L01C636B310-FULL.zip
seems to be malaysian phone
THIS GUIDE DOESNT WORK FOR NOW THIS WAS A WORKING IN PROGRESs,. MODS PLEASE DELETE THABKS
As there are almost no p10 on Oreo already this is quite useless right now?
Gesendet von meinem VTR-L29 mit Tapatalk
webwude said:
As there are almost no p10 on Oreo already this is quite useless right now?
Gesendet von meinem VTR-L29 mit Tapatalk
Click to expand...
Click to collapse
I posted oreo update links intercambiables lwannacm thread, that's why I'm asking this, but ir there is no way, it's okay, i can delete this post
MrAlez said:
I posted oreo update links intercambiables lwannacm thread
Click to expand...
Click to collapse
Where?!?
IrrelevantWhiteMan said:
Where?!?
Click to expand...
Click to collapse
Remember, right now THERE IS NO WAY TO ROLLBACK, so once you go oreo you cant go back, ay least we make true this guide with proper files
LINKS HERE:
http://update.hicloud.com:8180/TDS/...37/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...9_hw_normal/update_full_VTR-L29_hw_normal.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v107537/f1/full/update.zip
Tnx for link, this is for VTR-L29 C432?
IrrelevantWhiteMan said:
Tnx for link, this is for VTR-L29 C432?
Click to expand...
Click to collapse
yes, but remember this is dangerous, you will end up with a RELOCKED BOOTLOADER AND FRP UNLOCKED...
But why? It.s not official?
Sent from my Huawei P10 using Tapatalk
Anybody has the same problem, that the phone isn't showing up on twrp connected to the PC and MTP enabled? And the MicroSD card is "damaged" on the oreo Rom although it works perfectly well?
IrrelevantWhiteMan said:
Where?!?
Click to expand...
Click to collapse
PhoneBrick said:
Anybody has the same problem, that the phone isn't showing up on twrp connected to the PC and MTP enabled? And the MicroSD card is "damaged" on the oreo Rom although it works perfectly well?
Click to expand...
Click to collapse
Well, first question, where you hoy TWRP forma the oreo build?, Second it might be a bug that everytime you connect the p10 once you connect the device you have to manually select the mtp option also when using adb the same thing and third your SD might be broken, try changing the sd
updated
DOens't work
i HAVE TRIED SEVERAL TIMES THE PROCESS BUT IT DOESN ROLLBACK TO NOUGAT. I UPGRADED TO OREO VIA HWOTA USING DOWNLOADED FIRMWARE FROM GOOGLE AND I DONT FIND THE WAY TO ROOLBACK TO NOUGAT. I HAVE DONE ALL THE STEPS BUT IT ALWAYS STUCKS IN 6% WHEN IT TRIES TO UPDATE.
txonan said:
i HAVE TRIED SEVERAL TIMES THE PROCESS BUT IT DOESN ROLLBACK TO NOUGAT. I UPGRADED TO OREO VIA HWOTA USING DOWNLOADED FIRMWARE FROM GOOGLE AND I DONT FIND THE WAY TO ROOLBACK TO NOUGAT. I HAVE DONE ALL THE STEPS BUT IT ALWAYS STUCKS IN 6% WHEN IT TRIES TO UPDATE.
Click to expand...
Click to collapse
Yes it happens for now we are stuck at oreo, we nneed a rollback firmware that isnt released by huawei sorry.
MrAlez said:
Yes it happens for now we are stuck at oreo, we nneed a rollback firmware that isnt released by huawei sorry.
Click to expand...
Click to collapse
thanks for your reply,
So lets wait till is released. Do you know when are they going to release the official final Oreo update? Maybe January? I guess that when they release it the rollback firmware will be released too or a bit later.
Hi!
After a factory reset under Oreo 8.0.0.311, I'm on 8.0.0.046(01BN) now. I can't update with HWOTA or firmware finder. What can I do?
Oiphobie said:
Hi!
After a factory reset under Oreo 8.0.0.311, I'm on 8.0.0.046(01BN) now. I can't update with HWOTA or firmware finder. What can I do?
Click to expand...
Click to collapse
i am stuck on this version too.
have you succeed to do something?
t.h.i said:
i am stuck on this version too.
have you succeed to do something?
Click to expand...
Click to collapse
I have the same problem. I made it now to install TWRP by this method:
https://forum.xda-developers.com/p10/help/downgrade-oreo-t3726161
But when I start installing with update.bat (http://www.stechguide.com/install-android-8-0-oreo-on-huawei-p10), it stops when I am in TWRP mode. TWRP does not find my p10 in usb mode. So no installation. Any suggestions?
Anyone tried using the firmware update app to download the latest update ?
Kavitam said:
Anyone tried using the firmware update app to download the latest update ?
Click to expand...
Click to collapse
Emui 8.1 won't support ff update as of now.
miststudent2011 said:
Emui 8.1 won't support ff update as of now.
Click to expand...
Click to collapse
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
For that you need bootloader unlocked. I think he is trying to do that on stock unmodified .
youtuber123 said:
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
as of now theres is no 'no check recovery'
awells845 said:
as of now theres is no 'no check recovery'
Click to expand...
Click to collapse
There is : https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 confirmed working on other devices from Huawei/Honor
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
There is : https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 confirmed working on other devices from Huawei/Honor
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
Thanks.
Just a quick heads up for everyone thinking of using HuRUpdater for Honor 10 as I hard bricked my Honor 10 trying it out even by triple checking instructions carefully. It's definitely not compatible with it. Now I had to get it sent off for warranty repair. :crying:
awells845 said:
Thanks.
Just a quick heads up for everyone thinking of using HuRUpdater for Honor 10 as I hard bricked my Honor 10 trying it out even by triple checking instructions carefully. It's definitely not compatible with it. Now I had to get it sent off for warranty repair. :crying:
Click to expand...
Click to collapse
Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
No nothing at all. Tried everything. It's completely hard bricked. I even tried getting it to boot into fastboot mode but the display doesn't even turn on. I had to beg my mum to let me buy a new smartphone. I'm thankfully getting the OnePlus 6 and will sell the Honor 10 when it comes back from repair to pay my mum back. The only thing stuck in my mind is wishing I had just used erecovery earlier.
awells845 said:
No nothing at all. Tried everything. It's completely hard bricked. I even tried getting it to boot into fastboot mode but the display doesn't even turn on. I had to beg my mum to let me buy a new smartphone. I'm thankfully getting the OnePlus 6 and will sell the Honor 10 when it comes back from repair to pay my mum back. The only thing stuck in my mind is wishing I had just used erecovery earlier.
Click to expand...
Click to collapse
Which build did you try ?
miststudent2011 said:
Which build did you try ?
Click to expand...
Click to collapse
I used HurUpdater v0.3.zip and downloaded all firmware files for COL-L29 8.1.0.1.0.4 and renamed the files to match the HurUpdater thread https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Then I flashed in TWRP Recovery. It flashed successfully and I rebooted once complete. Then I got the black screen of death and tried to turn the phone on.
It's strange as the thread shows that it works for the P20 that has the same processor and confirmed by a user.
awells845 said:
I used HurUpdater v0.3.zip and downloaded all firmware files for COL-L29 8.1.0.1.0.4 and renamed the files to match the HurUpdater thread https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Then I flashed in TWRP Recovery. It flashed successfully and I rebooted once complete. Then I got the black screen of death and tried to turn the phone on.
It's strange as the thread shows that it works for the P20 that has the same processor and confirmed by a user.
Click to expand...
Click to collapse
I think there is some issue with those build in firmware finder one of my friend tried .120 build with HurUpdater and it flashed but got different device build installed. Its showing device as fty-l29 with chipset-boston as build number and may security patch .
But when he tried with 104 his device also bricked and currently can't switch on. Does any one of you know a way to recover it.
miststudent2011 said:
I think there is some issue with those build in firmware finder one of my friend tried .120 build with HurUpdater and it flashed but got different device build installed. Its showing device as fty-l29 with chipset-boston as build number and may security patch .
But when he tried with 104 his device also bricked and currently can't switch on. Does any one of you know a way to recover it.
Click to expand...
Click to collapse
Ah okay, glad I'm not alone. I tried to search for solutions too but nothing. It would be ideal if Huawei/Honor had a similar tool like what OnePlus have for there devices because it's as simple as using an MSM Download Tool and installing the Qualcomm Drivers and then flashing all files in the firmware. Huawei/Honor could have one for Kirin devices.
Hi, i have a mate 20 pro model c212 (at&t mexico), i want to install a new firmware for example c62 or c432, i can? or not? Pleas help me!
You could update main base easily, but that could screw the futur C212 stock OTA Updates if the new base version number you re flashing is not or won t be an official C212 base version number.
What is the matter with your LYA C212 ?
-still on emui9.0 and you want emui9.1 ?
-security patches date too old on latest C212 ?
oslo83 said:
You could update main base easily, but that could screw the futur C212 stock OTA Updates if the new base version number you re flashing is not or won t be an official C212 base version number.
What is the matter with your LYA C212 ?
-still on emui9.0 and you want emui9.1 ?
-security patches date too old on latest C212 ?
Click to expand...
Click to collapse
I am currently in version 9.1.320 of att mexico (212), but the Telcel version (C69) is updated faster, what I fear is that EMUI 10 does not arrive because of the att issue
Ok.
So no, there is no way to rebrand your M20P with a locked bootloader.
oslo83 said:
Ok.
So no, there is no way to rebrand your M20P with a locked bootloader.
Click to expand...
Click to collapse
And you know how to install an update if my operator does not?
You could use a service firmware to change cust, preload and base to a different region. I did this back and forth from C432 to C636 when I saw fit using the dload method.
Shaolin36 said:
You could use a service firmware to change cust, preload and base to a different region. I did this back and forth from C432 to C636 when I saw fit using the dload method.
Click to expand...
Click to collapse
dload will just skip the out-of-region cust and preload files ; only base will be applyed.
oslo83 said:
dload will just skip the out-of-region cust and preload files ; only base will be applyed.
Click to expand...
Click to collapse
Hm, when I used FH a while back it switched me to C636 - and every OTA I received was C636 - I couldn't return to C432 via any method until I tried dload and it worked for me. It may be because my device is natively C432.
I still don t understand how these previous FH updates managed to softrebrand just fine kirin980 devices.
Your build number once rebranded, in about phones, was then C636ExRyPz or you were missing the RyPz part?
oslo83 said:
I still don t understand how these previous FH updates managed to softrebrand just fine kirin980 devices.
Your build number once rebranded, in about phones, was then C636ExRyPz or you were missing the RyPz part?
Click to expand...
Click to collapse
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Shaolin36 said:
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Click to expand...
Click to collapse
Is it currently possible to do? For the bootloader issue, can you show me the guide you followed to flash?
Prounder15 said:
Is it currently possible to do? For the bootloader issue, can you show me the guide you followed to flash?
Click to expand...
Click to collapse
There will be guides around on our device forum. But basically requirements:
USB Stick (formatted exFAT)
USB OTG
You will need to download the service firmware, for this I used androidhost ru and firmware 9.1.0.300 C432.
You will have 3 zip files inside the firmware, you must create a folder on the USB stick called 'dload' and inside this folder you put the three zip files (named like update_sd_base.zip etc). Plug USB stick into device with OTG adapter and then open dialer and type *#*#2846579#*#* and choose software upgrade then memory card upgrade. Should restart and upgrade device to your new firmware (don't unplug USB during this process and make sure you have above 30% battery)
I though he was speaking about how to softrebrand with FunkyHuawei...
oslo83 said:
I though he was speaking about how to softrebrand with FunkyHuawei...
Click to expand...
Click to collapse
Well if he was speaking about that then there's no guidance I can provide him. It's a paid service and doesn't really require a 'guide' as it's simple. He can check out their website, but regardless - if he wishes to try the dload method then there's there guide.
Shaolin36 said:
There will be guides around on our device forum. But basically requirements:
USB Stick (formatted exFAT)
USB OTG
You will need to download the service firmware, for this I used androidhost ru and firmware 9.1.0.300 C432.
You will have 3 zip files inside the firmware, you must create a folder on the USB stick called 'dload' and inside this folder you put the three zip files (named like update_sd_base.zip etc). Plug USB stick into device with OTG adapter and then open dialer and type *#*#2846579#*#* and choose software upgrade then memory card upgrade. Should restart and upgrade device to your new firmware (don't unplug USB during this process and make sure you have above 30% battery)
Click to expand...
Click to collapse
Thank you very much brother for the guide, I will try with your guide and I will see what happens, only 1 more thing, the firmware I only found on the essy-firmware page but it is paid, do you know where I can download it for free?
Prounder15 said:
Thank you very much brother for the guide, I will try with your guide and I will see what happens, only 1 more thing, the firmware I only found on the essy-firmware page but it is paid, do you know where I can download it for free?
Click to expand...
Click to collapse
Search on androidhost.ru
Shaolin36 said:
Search on androidhost.ru
Click to expand...
Click to collapse
My model is LYA-09 is there any problem if I install some firmware for the LYA-L29?
In My model i only found:
Huawei Mate 20 Pro LYA-L09 hw eu Laya-L09C 9.0.0.266(C432E10R1P16) Firmware 9.0.0 r3 EMUI9.0.0 05015LBD [androidhost.ru].zip
In LYA-L29:
Huawei Mate 20 Pro LYA-L29 hw eu Laya-L29C 9.1.0.310(C432E10R1P16).DLOAD.zip
Shaolin36 said:
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Click to expand...
Click to collapse
So just to clarify, you're saying that you can rebrand a Huawei devices Cust code from example a C432 to C185 without bootloader being unlocked?
Sent from my EVR-L29 using Tapatalk
I'm in the same predicament. Previous owner flashed the firmware from C792 (Canada) to C636 (Asia) via FunkyHuawei. And now I'm not getting any OTA updates and stuck on 9.0.0265. I would like to re-flash my fw back to c792 and I have the bootloader unlock code for my device, but I'm unable to find any guides to help me achieve this. Will the guide you provided work for me as well?
Limeybastard said:
So just to clarify, you're saying that you can rebrand a Huawei devices Cust code from example a C432 to C185 without bootloader being unlocked?
Sent from my EVR-L29 using Tapatalk
Click to expand...
Click to collapse
Deevusone said:
I'm in the same predicament. Previous owner flashed the firmware from C792 (Canada) to C636 (Asia) via FunkyHuawei. And now I'm not getting any OTA updates and stuck on 9.0.0265. I would like to re-flash my fw back to c792 and I have the bootloader unlock code for my device, but I'm unable to find any guides to help me achieve this. Will the guide you provided work for me as well?
Click to expand...
Click to collapse
Yes, it should work. I'd be happy to help you if you add me on Telegram. @Shaolin36