I have a BLU vivo XL phone to which I have flashed a new rom using SP Flash Tool.
My sim card wasn't being recognized by the phone, and I noticed there was no longer an IMEI number assigned to my phone. There are two sim card slots, and I manually assigned the IMEI number for each slot using the apk Mobileuncle Tools.
The sim still isn't working, but when I check Settings>About Phone>Status>IMEI information, the IMEI for slot 1 and slot 2 both have numbers assigned now, however, there is another value for the IMEI SV(Slot 1) and IMEI SV(Slot2), i don't know what this is, but they both still say "unknown".
I am guessing that maybe I need to have both IMEI and IMEI SV numbers in order to use the sim card slots, but I don't know how to get it or what to try next.
Thank you for your help.
The short history:
Playing with an "official" ROM I bricked my phone. I was able to recover it, everything works properly except the telephony, I can't make phone calls :crying:.
The full story:
The behaviour of my phone is different depending on which slot I put my SIM card.
If I put my SIM on the first slot, when the phone reboots it doesn't ask for the PIN and doesn't recognise the card. But if I switch to plane mode and I reboot the phone, the phone then asks for the PIN number. If I introduce an incorrect one, it recognises that it is incorrect ans ask for a new one (then it is reading the card to know that), but when I introduce the correct one, it does no connect whit my carrier (of course, before that I switch off the plane mode).
If I put my SIM on the second slot, it asks for the PIN number but similarly to the previous case, It doesn't connect with the carrier.
In both cases dialling *#06# on the phone, I can read the two IMEI and the MEID codes and they agree with the codes printed on the phone box.
Moreover, if I install an app (I tested with some of them) that reads the SIM card it can read the name of my carrier and all the contacts that are on my SIM.
Things that I tried:
0) I tried to use my SIM in another phone, and it works. I also tried to use another SIM in my phone, and I have the same problem.
1) I tried to install several ROM's:
- Jeff72ROM (v1.30 and v1.32) from: http://www.needrom.com/category/zte/serial-nubia/z11-mini/
- stock ROM from http://4pda.ru/forum/index.php?showtopic=776504&st=0#entry52586301
- And experimental port of CM14 (I can't remember where I found it)
- CUOCO92 from http://blog.grossoshop.net/nubia-z11-mini-rom-gs-by-cuoco92/
- An "official" ROM: NX529J_Z69_EN_NSXPK1JD00K132 from http://www.nubia.com/es/support.php?a=phone&pid=8 (this is the ROM that bricked my phone, I modified it in order to avoid the problem).
To install all these ROM I used TWPR from http://www.androidbrick.com/download/z11-mini-nx529j-twrp-root/
When I dial *#*#4636#*#* on the phone it says that the type of preferred net is WCDMA. It seems to me that these nets are not in use in Europe (I live in Spain). Itried to change that, but I couldn't. Then I applied the patch http://forum.xda-developers.com/showthread.php?t=2394689 but it doesn't work. I also tried to modify the properties in "build.prop" without success. Now I think this is not the problem since all the ROM's have similar properties, in special CUOCO92 that is reported to work in Italy.
What I think it happened:
When I tried to flash the "official" ROM it failed because it tried to write too many files in the "system" partition (I hadn't this problem with any other ROM). Then I realised that my phone was bought in China and this ROM was for the international version, perhaps the international version has a different partition scheme).
What I did is to remove some very easy to install apps (i.e. google maps) in the ROM in order that the remaining apps fit in the partition, but then I made the mistake to activate the option in TWPR of making "rm -rf" instead of a "format". It seems to me that with this option the rm command followed some link to another partition and removed some files that shouldn't be removed, and those files are not in any ROM.
Does anybody think that this makes sense?
What can I do?
nice, super description. i am stuck with my nubia z11 mini, brought from china. installed 1.23, recently updated new 1.36 but there is no google play, other all working perfectly.
Hi,
I have the same problem. Did you find a solution?
Thanks in advance, F.
---------- Post added at 08:17 AM ---------- Previous post was at 07:44 AM ----------
@jbartolo
I have the NX529J and the option wasn't changed, it was still format. I don't think the problem is related to the partition.
@jbartolo
Any news about your z11?
Did you manage to fix it?
I have the same problem.
efrai3 said:
@jbartolo
Any news about your z11?
Did you manage to fix it?
I have the same problem.
Click to expand...
Click to collapse
No solution :crying:
I had access to another z11 mini and a played copying partitions from this phone to my phone without success.
@jbartolo
Since you can have access to another z11 mini please check these guides
http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/
http://www.androidbrick.com/ultimat...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-imei-baseband-repair-fix-part-2/
Also you will see more guides in the mentioned site and maybe you can fix your phone. Unfortunately i dont have access to another z11 mini to try. Wish you good luck.
@jbartolo
I did some progress with my phone.
I flash it with the chinese 1.23 rom(its the one in fastboot structure as i understand,a service rom) using Xiaomi's MiFlash tool.
Phone came up with null IMEI'S and MEID. Then i write missing IMEI'S & MEID ,with some tools from the site i mentioned you in my previous post.
So everything is in place now. IMEI'S & MEID.
Now when i dal *#06#* and *#*#4636#*#* i can see Imei's & Meid.
Also i can change the option from WCDMA preferred to other options and stick with them (*#*#4636#*#*) and i can see in phone settings and SIM menu all the options.
Both sim trays read my sim and ask for pin.
In SIM menu, i can search for avalaible carriers but the only problem now is that when i'm trying to connect to my sim carrier unfortunately phone can't register to my carrier.
I'm trying to figure out how to solve this issue.
You can try what i did and maybe you are more lucky than me and can fix your phone.
Hope to hear from you soon and maybe we can share some more ideas.
efrai3 said:
@jbartolo
I did some progress with my phone.
I flash it with the chinese 1.23 rom(its the one in fastboot structure as i understand,a service rom) using Xiaomi's MiFlash tool.
Phone came up with null IMEI'S and MEID. Then i write missing IMEI'S & MEID ,with some tools from the site i mentioned you in my previous post.
So everything is in place now. IMEI'S & MEID.
Now when i dal *#06#* and *#*#4636#*#* i can see Imei's & Meid.
Also i can change the option from WCDMA preferred to other options and stick with them (*#*#4636#*#*) and i can see in phone settings and SIM menu all the options.
Both sim trays read my sim and ask for pin.
In SIM menu, i can search for avalaible carriers but the only problem now is that when i'm trying to connect to my sim carrier unfortunately phone can't register to my carrier.
I'm trying to figure out how to solve this issue.
You can try what i did and maybe you are more lucky than me and can fix your phone.
Hope to hear from you soon and maybe we can share some more ideas.
Click to expand...
Click to collapse
Take a look here https://forum.xda-developers.com/zte-z7/help/nubia-z7-nx506j-qcn-backup-t3566808. Might help you guys with the problem you are facing. Most important part is you need a working qcn backup from another device
tassos_chry said:
Take a look here https://forum.xda-developers.com/zte-z7/help/nubia-z7-nx506j-qcn-backup-t3566808. Might help you guys with the problem you are facing. Most important part is you need a working qcn backup from another device
Click to expand...
Click to collapse
Yes i know that we need a backup of qnc from another working phone in order to modify it and apply our imei's and meid, but where to find one???
It's difficult to have one as you understand.
efrai3 said:
Yes i know that we need a backup of qnc from another working phone in order to modify it and apply our imei's and meid, but where to find one???
It's difficult to have one as you understand.
Click to expand...
Click to collapse
You could contact the owner of www.androidbrick.com in case he has one. Or you can ask @jbartolo to provide a backup of his other device. Taking a qcn backup is a pretty simple procedure
@efrai3 Just contacted him again and he was happy to share with me a qcn backup for your device
You can contact him too and ask for one! He will be glad to help!
tassos_chry said:
You could contact the owner of www.androidbrick.com in case he has one. Or you can ask @jbartolo to provide a backup of his other device. Taking a qcn backup is a pretty simple procedure
@efrai3 Just contacted him again and he was happy to share with me a qcn backup for your device
Hit Thanks if i helped and let me know if it worked
Click to expand...
Click to collapse
Thanks to my friend tassos_chry, my phone is fixed.
problem solved: Z11 mini working again
All,
the AndroidBrick method worked.
First I tried it with my own qcn backup but that didn'twork. I received a qcn (Chinese, 64 GB) from AndroidBrick and I followed the repair guide. My Nubia Z11 mini is working again.
The solution for our problem is that you need a qcn backup from a working phone because when you install the wrong rom (international version) the modemst-partions are corrupt.
I'll prepare a backup qcn from my phone (changed IMEI) and I can send it to you.
Send me a mail at [email protected].
Filip.
Z11 mini NX529J problem
First of all:
>i bought an used NX529J
>first sim slot doesn't work at all, second slot recognize sim card
^-i don't know if it's software or hardware related
>no connect to carrier
>cannot unlock sim card with PIN
What i tried:
>flashed XenonHD Rom
>*#06#* : only MEID, but it is the same number, as the first IMEI number
>*#*#4636#*#* : first IMEI number
>tried all sim settings, but no connect to carrier
Has some an idea?
Hello everybody,
i found the solution! Now both sim card slot's work and can connect to carrier!
My solution:
https://forum.xda-developers.com/android/development/zte-nubia-z11-mini-nx529j-restore-t3619771
The right qcn file
FilipVD said:
All,
the AndroidBrick method worked.
First I tried it with my own qcn backup but that didn'twork. I received a qcn (Chinese, 64 GB) from AndroidBrick and I followed the repair guide. My Nubia Z11 mini is working again.
The solution for our problem is that you need a qcn backup from a working phone because when you install the wrong rom (international version) the modemst-partions are corrupt.
I'll prepare a backup qcn from my phone (changed IMEI) and I can send it to you.
Send me a mail at [email protected].
Filip.
Click to expand...
Click to collapse
Hello Filip,
Would you help me, please? I need the same chinese 64GB qcn file you got from AndroidBrick too!
I followed the same repair guide on AndroidBrick (using a vietnamite qcn file I just download) with no success because when I started restoring the qcn I received a message that My Phone is not compatible and after rebooting ...adviced me 2 times that the update did not success.
I will be happy to give my email address for your (or even other God) help.
Have a nice day and a good way
Hi
Recently I have had some issues where sim cards are not working on my phone. At first I thought it was an issue with the sim cards but when I tried the sim in a different phone, it worked fine. I tried numerous restarts, taking the sim out and placing it back in (in case there was an issue with the contacts/sim tray) but this has not solved the issue. By chance I was looking at the phone identity menu and noticed that the IMEI and the IMEI SV fields both say unknown but the device serial number is fine.
android version to 7.0 (OS 4.27.651.4)
how can i get IMEI so plz help me (country UAE)
moazzam2025 said:
Hi
Recently I have had some issues where sim cards are not working on my phone. At first I thought it was an issue with the sim cards but when I tried the sim in a different phone, it worked fine. I tried numerous restarts, taking the sim out and placing it back in (in case there was an issue with the contacts/sim tray) but this has not solved the issue. By chance I was looking at the phone identity menu and noticed that the IMEI and the IMEI SV fields both say unknown but the device serial number is fine.
android version to 7.0 (OS 4.27.651.4)
how can i get IMEI so plz help me (country UAE)
Click to expand...
Click to collapse
TRY THIS
fastboot erase modem_st1
fastboot erase modem_st2
I had bricked my phone. then I flashed it using SP Flash Tool with "Format + Download" option. then I saw that there is only one IMEI showing at that one too was null. after that I tried Lenevo Moto Smart Assistant and here also I got the same. Now, I used SN Write Tool to write IMEI details. After choosing Dual IMEI option, I eneterd both IMEI original. But still I see that there is only one IMEI showing in my phone and still no option for IMEI2. And with one IMEI, it supports only one SIM card. Please help me to recover IMEI2 option... so that I can use both SIM cards.
Helo Guys,
Recently when i flashed my S9+ Single Sim, after this it shows 2 IMEI no. in settings and also model no. changed, moreover on the origional IMEI Sim is not working and the other is showing 000000 is there any way to get back my device in working condition again. a Screenshot is also attached.