ElementalX Repack for HTC m8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
Easy installation with Aroma installer
CPU and GPU overclocking/underclocking
ZRam swap with multistream functionality and lz4/lzo compression
gboost for enhanced gaming performance
choose voltage profile in installer
full user voltage control
i/o schedulers: FIOPS, SIO, CFQ, NOOP, ROW, BFQ, deadline, VR, Zen, Fifo
optional sweep2sleep
optional custom wake gestures (no motion required!)
optional pocket detection (with custom wake gestures)
High Definition Audio capability
optional USB fastcharge
option to reduce vibration strength
remove /system write protection
NTFS r/w, CIFS, exFAT support
option to disable fsync
option to disable magnetic cover
color and gamma control
LZ4 kernel compression
compiled with linaro 4.9.4 for Cortex A15 from Christopher83
Click to expand...
Click to collapse
INSTALLATION
1. Install zip from recovery
2. Follow the instructions, if you don't know what to do, use the preselected options
3. Reboot
It is recommended to disable or increase the screen timeout in TWRP recovery. If the screen timeout is enabled in TWRP, there may be a black screen after exiting the Aroma installer. This is nothing to worry about. Simply hold power and volume down until it reboots. The installation will be fine.
Express installer
1. Install zip from recovery
2. Reboot
This installer goes without AROMA. And this recommended upgrade method from one repack to another.
It's take previous options, selected in AROMA before.
If you installing Repack in first time- use AROMA version.
Click to expand...
Click to collapse
DOWNLOADS
Sense/GPE (Android 6) GSM
ElementalX Repack 7.00.11 GSM
ElementalX Express Repack 7.00.11 GSM
Sense/GPE (Android 6) All models (including Sprint & Verizon)
ElementalX Repack 7.00.11 All models
ElementalX Express Repack 7.00.11 All models
Click to expand...
Click to collapse
WARNING
New compression method use multistream compression for ZRam swap, which allow to use 1 swap device with several streams.
Most ROM's using several swap devices (usually 4).
In this kernel number of compression streams set to 4 with 1 device.
If you installing this kernel in first time- you should flash this file. It change number of swap devices to 1 and set swap to 820 or 625 MB*.
Swap file changer (820 MB)
Swap file changer (625 MB)
* Most MM ROM's have 820 MB of ZRam swap. Some (like JW) have 625 MB.
Click to expand...
Click to collapse
NOTE
Thanks to flar2 for his awesome ElementalX kernel for various devices!
For tuning tons of kernel parameters- I recommend to use EX Kernel Manager from flar2. This program is definitely worth the money that asked for it
Click to expand...
Click to collapse
Thanks To/Credits
flar2 for evesome kernel
krazie1 for dt.img for Verison & Sprint
Massstash for dt.img for all models
Christopher83 for optimized linaro toolchain
smeejaytee for testing
Click to expand...
Click to collapse
If you like my work- Donate to me
XDA:DevDB Information
ElementalX Repack, Kernel for the HTC One (M8)
Contributors
alex6600, flar2
Source Code: https://github.com/alexey6600/M8_Sense_7.00
Kernel Special Features:
Version Information
Status: Stable
Created 2016-10-09
Last Updated 2016-11-21
Changelog
Versions history
Version 7.00.11
Added lz4hc ZRam compression
Enable more arm neon optimized crypto
Added governors:
- INTELLIACTIVE
- ADAPTIVE
- WHEATLEY
- INTELLIDEMAND
- DANCEDANCE
- LAGFREE
- LIONHEART
- SMARTASSV2
- Tripndroid
Added Mako Hotplug driver (tnx Francisco Franco)
Version 7.00.10
This version- small fixes over 7.00.9.
Including:
Added some Neon-optimized crypto
Small defconfig changes for decrease kernel size
Version 7.00.9
Optimized ZEN scheduler
Fixup 268mhz clock
Version 7.00.8
Enable kernel mode neon
Linux kernel patched to 3.4.4
Version 7.00.7
Add 100 mhz gpu step
Disable KSM (for now)
Version 7.00.6
Added IO schedulers :
FiFo
Vr by Aaron Carroll
Zen by Brandon Berhert
Optimize KSM
Version 7.00.5
Added min freq 268MHz
Limit max freq when screen is off (thanks flar2)
Added GPU overclock to 600 MHz
Version 7.00.4
Enabled KSM with HTC KSM Policy (improve power drop impact when KSM is on) in KSM version
Motorola's MSM memcpy enhancements
I/O performance improvements
Version 7.00.3
GPU default freq 330MHz (like in stock). UI will be smoother.
Improved compression algorithms
Minor improvements
Version 7.00.2
Add LZ4 compression/decompression
LZ4 compression for zram (faster than default LZO)
Multithreading compression for zram
Memory/Math related function optimization
Disabled some logging
Changed compiler to Linaro 4.9.4 for Cortex A15 from Christopher83
Click to expand...
Click to collapse
Reserved
Reserved
Subscribed. Thanks!
I will try 7.00.9 version
Subscribed
Sent from my HTC One M8 using Tapatalk
nice work
Thanks for you work
Sent from my HTC One M8 using XDA Labs
Two year+ old phone still getting lots of love :highfive:
Will you please repack the latest for the GPE ? Thanks in advance
Not necessarily better. Just a different flavor with other options.
Scozzar said:
What makes this better than the OG Elemental X?
Click to expand...
Click to collapse
Take look at changelog.
Most of changes- lz4 for kernel and zram. lz4 faster than default lzo.
Different freqs for GPU and CPU (100-600 MHz for GPU, min 268 for CPU).
More IO schedulers.
Limit max freq when screen is off (that been in ElementalX6, and absent in ElementalX7).
Spint & Verizon versions.
And more.
Scozzar said:
What makes this better than the OG Elemental X?
Click to expand...
Click to collapse
+1 What's the difference?
EDIT Sorry I have not seen the latest answers thank you
EDIT2 I'm on elementalX 7 can i flash over it?
I must flash Swap file changer after or before the EX Repack kernel?
Excuse for questions
kalel77 said:
+1 What's the difference?
EDIT Sorry I have not seen the latest answers thank you
EDIT2 I'm on elementalX 7 can i flash over it?
I must flash Swap file changer after or before the EX Repack kernel?
Excuse for questions
Click to expand...
Click to collapse
Yes, you can.
No matter when you install "swap changer".
Hi Alex! Have you heard of the GovTuner project by Debuffer? If so, would you recommend it along with your kernel or would it mess with the present values?
Durrz said:
Hi Alex! Have you heard of the GovTuner project by Debuffer? If so, would you recommend it along with your kernel or would it mess with the present values?
Click to expand...
Click to collapse
No, i don't.
Try, and give feedback for all
alex6600 said:
No, i don't.
Try, and give feedback for all
Click to expand...
Click to collapse
Alright. Will do that. Thanks for your work!
alex6600 said:
Yes, you can.
No matter when you install "swap changer".
Click to expand...
Click to collapse
thanks, installed now.:good:
Link download?
MotoE2014 said:
Link download?
Click to expand...
Click to collapse
in OP choose yours click on it direct download
Sent from my HTC One M8 using XDA Labs
MotoE2014 said:
Link download?
Click to expand...
Click to collapse
Tomorrow I upload kernels on AFH too.
Sent from my HTC One M8 using XDA-Developers mobile app
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel for HTC One (M8) International/Sprint/Verizon
KERNEL FUTURES
easy installation with Aroma installer
change settings on the fly, how to: In post #2
EDP frequence limitation
MpDecision hotplug
CPUQUIET hotplug (runnable, rq_stats, load_stats)
Intelli hotplug
Intelli governors
mako hotplug
CPU overclocking/underclocking
full user voltage control
optional sweep2sleep
optional USB fastcharge
stereo call reccording
faux sound gain control
harman kardon HD audio
high resolution audio (up to 192 Khz)
optional high perfomance audio (AB Stereo)
addition IO schedules sio and fiops
frandom device
KEXEC-HARDBOOT (MultiRom support)
USB NTFS RW support
LCD_KCAL color control
option to disable magnetic cover (works)
backlight dimmer mod
wake gestures
removed /system write protection
optimized -O2 linaro 4.9.3
Click to expand...
Click to collapse
SCRIPTER FUTURES
mV UV control
Prepare new cpu_oc and reflash kenel image(auto)
Change common kernel options
Change HotPlugs
Change CPUQuiet governors
Show current values and user mV UV table
Rebuild init.d script file with current values (Save)
etc
Click to expand...
Click to collapse
kernel control In post #2
DOWNLOADS
Sense (Lollipop) #038
lONELyX m8 Sense kernel
GPE (Lollipop) #001
lONELyX m8 GPE kernel
CHANGELOG the post #3
Click to expand...
Click to collapse
THANKS
@flar2 - who made it possible and for explanations about DTB
@faux123 - for Intelli, sound gain control, powersuspend driver
@maxwen - for cpuquiet
@franciscofranco - for mako
Click to expand...
Click to collapse
SOURCES
GitHub:
m8_sense_lollipop
m8_GPE_lollipop
Click to expand...
Click to collapse
XDA:DevDB Information
lONElyX HTC One (M8) Kernel, Kernel for the HTC One (M8)
Contributors
lyapota
Source Code: https://github.com/lyapota
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: #038
Stable Release Date: 2015-07-31
Created 2014-09-19
Last Updated 2015-07-31
Scripter
To control kernel options on the fly, you can use Scripter from attachments.
It modified by me Faziklogic Scripter 1.8
HOW TO USE
- Install kernel with option "addition scripts"
- Install attached Scripter
- Do import scripts from SDCard in Scripter "settings"
- Use it.
Click to expand...
Click to collapse
REFLASH KERNEL
- Install kernel with option "addition scripts"
- Do Delete history in Scripter "settings"
- Do Delete saved scripts in Scripter "settings"
- Do import scripts from SDCard in Scripter "settings"
- Use new scripts.
Click to expand...
Click to collapse
CHANGELOG
Lollipop kernels:
____________________________________
#038
restored Stock GPU scaling (Sense)
#037
merged with 4.29.1400.6 sources
improved repack option in aroma (set default)
added GPE kernel
#036
restored sound driver 4.16 kernel sources
bit improved wake gestures algorithm
#035
reworked dt2w
#034
added flar2's wake gestures
#033
replaced color control with newest
restored best freq table
#032
merged with 4.25 sources
universal RAM disk GSM+SPRINT+VZW
build with GSM, SPRINT, VZW and DUGL dtb
#030
remade from scratch.
#026 fix
fixed megre errors
#025 5.0.1
merged with latest kernel sources m8ul-3.4.0-g800dad5
KitKat kernels:
OLD CHANGELOG 4.4.3 base
#024 sound
merged with latest kernel sources m8dugl-3.4.0-g71c77fc
cleaned taiko driver source(bit close to HTC)
set westwood by default
#023 harman kardon
merged with Sprint harman kardon kernel sources
compiled with HTC HD sound for harman kardon libs
compiled with linaro 4.9.3
solved calls issue for Sprint users
#022 just time
added Dual SIM support
added installer RAM Disks for WHL/VZW/DUGL
clean code, bit close to stock
updated mako_hotplug
updated prima to 3.2.3.172-LA.3.5.2-htc-032
Fixed updater script for Verizon(VZW), thx @mido.fayad and @Captain_Throwback
#021 unified 4.4.4
Unificaton try with 4.4.4 (GSM/VZW/WHL)
#020 4.4.4
Rebased to 4.4.4 (GSM only)
#011 Fix
Fixed gain sound control error that cause reboot with autoload fauxsaund app settings
#010 Release
ported mako hotplug *
added backlight dimmer mod
added powersuspend driver
adapted mako hotplug and cpuquiet with powersuspend driver
restored powersuspend functions in intelli hotplug
applied fix - touchscreen sometimes not initializing
added TCP congestion control algorithms westwood and vegas
next try to unified DTB image in one file
aroma: added dimmer mod options
Scripter: added dimmer mod options
Scripter: added mako hotplug
Scripter: added balanced to cpuquiet governor options
* to get working mako hotplug, after enable it, need power off/on
#009 Release
Adjusted CPU power borders for setting highest freq on AB/AC devices
Frequency table refer to the general condition (removed 2.1 and 2.3 Ghz)
Aromа/Scripter: expanded frequences choise
Aromа: voltage addition set to 0 mV (default)
Aromа: added choice - repack kernel with existing RAM disk, or flash with own
#008 RC1
Restored Tuxera exFat kernel module
Added LCD_KCAL color control
Restored CPU frequency table
Fixed KEXEC-HARDBOOT
#007 By User requests
Redused battery consumption
Improved performance
Added IO schedules sio and fiops
Added frandom device
Added KEXEC-HARDBOOT
Added USB NTFS RW support
#006 Sound
Added stereo reccording
Added faux sound gain control
Added high resolution audio (up to 192 Khz)
Added high perfomance audio (AB Stereo)
Added option enable/disable high perf audio (Aroma/Scripter)
Tо scripts added remount system in RW mode, if current RO
Reduced CPU frequence table (removed rarely used freq)
#005 BugFix for 004
Mount system RW mode
CPUQuiet runnable (default)
#004 MpDecision/CPUQuiet/Intelli
this version build with MpDecision(default), CPUQuiet and Intelli hotplugs
added faux123 Intelli hotplug
added faux123 Intellidemand and intelliactive governors
changed CPUQuiet CPU up algorithm to "best core to turn up" (3->2->1)
added CPUQuiet hotplug governors "rq_stats" (default), runnable, load_stats
rewrited Scripter scripts
+ Ability to swich hotplug
+ Ability to swich CPUQuiet governors
+ Show current hotplug, CPUQuiet governor
+ Ability to SAVE all current settings(except cpu_oc) to init.d/55lonelyx
+ Abbility to PRESET cpu_oc
+ Ability to REWRITE presetted cpu_oc in kernel image. With this script ittem - device will reboot to recovery, kernel will processed with new cpu_oc, device will reboot to normal mode.
#003 MpDecision
this version build with MpDecision
changed aroma binary to universal, thx @dandan2980
rewrited installation process:
-kernel image repacking on the device for each model
-dtb files compiled for each model separately
-for Sprint an Verizon used Viper RAM images.
#002 CPUQuiet
updated sources to base GSM 2.25
unification attempt (GSM/Verizon/Sprint)
+ added Verizon and Sprint device tree
+ modified ramdisk
+ added device model aroma menu
#001
initial
Hey! Great to see you here!
Used your kernel on my one x!
One question. As it has cpuquiet hotplug is pnpmngr still functional or does this kernel disable it?
Sweet to bad I'm on Sprint nice job though.
Freak07 said:
Hey! Great to see you here!
Used your kernel on my one x!
One question. As it has cpuquiet hotplug is pnpmngr still functional or does this kernel disable it?
Click to expand...
Click to collapse
Not disable pnpmngr. Disabled only mpdecision. pnpmngr - it not hotplug manager.
Nice.. if you working again on this can you look to s2w..i don't like that new HTC unlock with swipe up
Will also have a look but you have more experience
Perfect !
Alex-V said:
Nice.. if you working again on this can you look to s2w..i don't like that new HTC unlock with swipe up
Click to expand...
Click to collapse
Wow Alex you are returned. Nice no see you here!!!
I rewrote s2s, will look at this bit latter for s2w.
lyapota said:
Wow Alex you are returned. Nice no see you here!!!
I rewrote s2s, will look at this bit latter for s2w.
Click to expand...
Click to collapse
Yeah and thanks
What are the kernel features?
K-a-M-u-Z-u said:
What are the kernel features?
Click to expand...
Click to collapse
Title page in process ...
hey! thx for the great work!
Good to see you back lyapota I used you one x kernel it was a good kernel very good it was a shame when you gave up on it the same thoughts go with Alex too I'm using elemental atm but I will surely take a look at this soon your battery life compared to other kernels on hox were second to none
I think I'm m8_ul it is gsm isn't it
smeejaytee said:
Good to see you back lyapota I used you one x kernel it was a good kernel very good it was a shame when you gave up on it the same thoughts go with Alex too I'm using elemental atm but I will surely take a look at this soon your battery life compared to other kernels on hox were second to none
I think I'm m8_ul it is gsm isn't it
Click to expand...
Click to collapse
Yes ul it's international GSM version.
Thank you will you be adding frandom and ic2 looks good also
lyapota said:
Not disable pnpmngr. Disabled only mpdecision. pnpmngr - it not hotplug manager.
Click to expand...
Click to collapse
Okay thanks. I thought if you disabled mpdecision pnpmngr wouldn't function.
Freak07 said:
Okay thanks. I thought if you disabled mpdecision pnpmngr wouldn't function.
Click to expand...
Click to collapse
I mean binary files. Mpdecision it hotplug, pnpmngr it booster. Pnpmgr set min max CPU freq and boost GPU. This functions still working. In kernel I'm don't touch pnpnmgr. In kernel pnpmngr one for mpdecision and for pnpmgr binaries.
Mom,is that Jesus?
My goodness,most of my favorite devs are here now
Great to see you here,can't wait for tons of your crazy mods:good::good:
lyapota said:
I mean binary files. Mpdecision it hotplug, pnpmngr it booster. Pnpmgr set min max CPU freq and boost GPU. This functions still working. In kernel I'm don't touch pnpnmgr. In kernel pnpmngr one for mpdecision and for pnpmgr binaries.
Click to expand...
Click to collapse
Okay, thanks for the clarification!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phoenix Kernel
Phoenix -Kernel For Optimus L7 II (vee7)
P710-P714
Features
Based on the STOCK Source v10a from LG
Toolchain: Built with GCC 4.7 toolchain from SABERMOD
Linux: 3.4.0
Swap
zRam Support: support for zRam memory compression
KSM: Kernel Same-page Merging enable
Dynamic Fsync: Faux123's Dynamic File Sync v1.2
ARM optimizations
Fast Charge: chad0989 fast_charge driver, allowing to set the amperage of the charger or USB port your device is plugged-in to (default disabled)
Lowered swappiness (60 -> 45)
Optimized AES and SHA1 routines for ARM cpu architecture
Optimized SLUB memory allocator
Optimized ARM RWSEM (read/write semaphore)
Fast Random generator (frandom) support
Optimizations: Built with -O2 and many optimization flags
Intelliplug 3.8 thanks faux123 (Ecomode (more battery saving))
Governors:
- SIO (SImple Ondemand)
- Interactive
- Conservative
- Ondemand
- Userspace
- Powersave
- Performance
Additional Governors:
- SmartassV2
- Badass
- Lionheart
- Lagfree
- PegasusQ
- OndemandX
I/O Schedulers:
- Noop
- Deadline
- CFQ
Additional I/O Schedulers:
- SIO (SImple Ondemand)
- Fiops
Click to expand...
Click to collapse
The REQUIREMENTS
A unlocked bootloader
Custom Recovery CWM/PHILZ/TWRP
A brain with the ability to read
The will to recycle your warranty papers
The INSTRUCTIONS
Copy the zip to your sdcard
boot into recovery
flash the zip
reboot
enjoy
What is Intelli_plug and Ecomode? From FAUX123
Intelli_plug. Intelli_plug is a generic ARM SOC cpu hotplug driver. This is a COMPLETE replacement for Qualcomm's proprietary make poor decision. Intelli_plug has built-in Eco Mode support (Eco Mode is a optimized dual core solution for quad-core SOC like the Qualcomm S4-pro. This should allow for Maximum battery life without sacrificing performance). Because intelli_plug is a generic hotplug cpu driver, it will work with ALL CPU governors from conservative, ondemand, interactive and intellidemand and Eco Mode is available for ALL cpu governors as well!!!!
intelli_plug is automatically enabled when mpdecision is disabled.
Click to expand...
Click to collapse
The THANKS
faux123
srfarias
gokhanmoral
markus-oberhumer
ariava
paolo-github
CastagnaIT
tiny4579
flar2
special thanks to Mario Rodriguez Castro for being my tester
Do you like my Kernel? use this buttons for support me
DOWNLOAD
Phoenix-V1
Phoenix-V2
Fanpage: like = future project
https://www.facebook.com/Phoenix-DEV-1719991991571980/
XDA:DevDB Information
Kernel Phoenix, Kernel for the LG Optimus L7 II
Contributors
chijure
Source Code: https://github.com/chijure/android_kernel_lge_vee7
Kernel Special Features: UV, Fast Charge, Swap, Zram, KSM, Dynamic Fsync, F2FS, Frandom, , SIO, VR, FIOPS, Intelliplug, BFQ, ...
Version Information
Status: Stable
Current Stable Version: 02
Stable Release Date: 2015-08-10
Created 2015-07-15
Last Updated 2015-08-10
CHANGELOG
CHANGELOG
2015-07-11 Phoenix v1
Initial relase
USB force fast charging
updated libraries with optimized kernel functions
updated LZO algorithms
ARM unaligned access enabled
FIOPS I/O schedulers added
SIO I/O schedulers added
Enable Deadline
Add /dev/frandom support
Add dynamic sync control
compiled with GCC 4.7
2015-08-10 Phoenix v2
Add governor SmartassV2
Add governor Badass
Add governor Lionheart
Add governor Lagfree
Add governor PegasusQ
Add governor OndemandX
zcache/zram: add support for ARM, MIPS, SUPERH
Squash Intelli_plug 3.8 from faux123
I have Purified v1 ROM, LG P710. Can I install this kernel? Thank you.
krnjinac said:
I have Purified v1 ROM, LG P710. Can I install this kernel? Thank you.
Click to expand...
Click to collapse
Yes [emoji4] It works on all stock-based roms 4.1.2
Enviado desde mi XT1032 mediante Tapatalk
Gonna test it right now
Can I?
Hey you guys ! thanks! great job ! , I have a question, can I install it if I'm using the amigakitkat rom? Pls Help me!
Read carefully before asking. The title of the thread itself says 4.1.2 which is JellyBean. Amiga KitKat is... well... KitKat(4.4.x) obviously. This kernel is for 4.1.2 JellyBean only.
Good job man
I have some buttons fails sometimes when I use any app, here a log bellow:
gohaz0331 said:
I have some buttons fails sometimes when I use any app, here a log bellow:
Click to expand...
Click to collapse
that variant of the L7 II has ?? example p710
chijure said:
that variant of the L7 II has ?? example p710
Click to expand...
Click to collapse
I have the p714 (single sim version without nfc).
gohaz0331 said:
I have the p714 (single sim version without nfc).
Click to expand...
Click to collapse
I have the p714 also and I have no errors
Hello everyone. What's the difference in stability and performance with this kernel and this one by Airidosas? Can't test right now,but interested =)
Thanks for you work and time.
I have a question, how to enable zRAM? I tried with Kernel Adiutor but i can't enable this option.
Greetings from Mexico and sorry for my bad English.
DS_katauri said:
Hello everyone. What's the difference in stability and performance with this kernel and this one by Airidosas? Can't test right now,but interested =)
Click to expand...
Click to collapse
This kernel already has all the of Airidosas but with more features
raffles496 said:
Thanks for you work and time.
I have a question, how to enable zRAM? I tried with Kernel Adiutor but i can't enable this option.
Greetings from Mexico and sorry for my bad English.
Click to expand...
Click to collapse
Sorry my mistake is in v1 that is already fixed in V2 thanks
chijure said:
This kernel already has all the of Airidosas but with more features
Click to expand...
Click to collapse
Well,v1 was discharging a bit faster,gonna try v2 today. A noob question,will it support dual sim revision of LG L7 ll? As i noticed there actually arent modern optimised kernels for dual sim. And a second one,overclock is still impossible?
DS_katauri said:
Well,v1 was discharging a bit faster,gonna try v2 today. A noob question,will it support dual sim revision of LG L7 ll? As i noticed there actually arent modern optimised kernels for dual sim. And a second one,overclock is still impossible?
Click to expand...
Click to collapse
The support for dual version of L7 II (P715) will do for v3, whether it is possible to overclock mmm .. it is a bit tricky to find no information processor using L7 II MSM8625 (Snapdragon 200) on how I'm testing it stable with changes kernels with HTC DESIRE X but I can not promise anything to reward the overclock I'm adding the best features for better device performance
chijure said:
Sorry my mistake is in v1 that is already fixed in V2 thanks
Click to expand...
Click to collapse
Thanks for you support.
Now used v2 but again ZRam no work, i tried with ZRam Settings and Kernerl Adiutor apps from Play Store. I need app in specific for ZRam enable?
Also only i see available some governors.
Sorry for the troubles and bad English, greetings from Mexico.
Enviado desde mi LG-P714 mediante Tapatalk
chijure said:
The support for dual version of L7 II (P715) will do for v3, whether it is possible to overclock mmm .. it is a bit tricky to find no information processor using L7 II MSM8625 (Snapdragon 200) on how I'm testing it stable with changes kernels with HTC DESIRE X but I can not promise anything to reward the overclock I'm adding the best features for better device performance
Click to expand...
Click to collapse
Actually Lg l7 II is using MSM8225 aka Snapdragon S4 Play
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
The kernel is based off latest sources from Samsung and is compatible with all roms . Over stock kernel this kernel possesses following enhancements
Insecured
adb runnable as root
init.d support
Fsync On/Off switch.
Overclocked to 1.6Ghz and Underclocked to 200Mhz
Built Using Linaro- 5.2 Toolchain.
Frandom driver- Fast Kernel Number Generator..
Support for crc-toggle..
Add LZ4 decompressor module
Add support for Zswap.
Upstream ZRAM with lz4 compression.
Now powered by AROMA Installer.
Support for Gentle fair sleeper toggle.
Dynamic Fsync Control - A driver originally written by faux123- Disables Fsync when phone is being used causing significant IO boost.
Power efficient workqueue
SELinux set to permissive
Automatic busybox installation
Lock initial TCP window size to 64k (Improves network ping and output)
Improved filesystem mounting flags - NOATIME and NODIRATIME
Huge update to kernel.org mainline 3.10.105
IOScheduler
block: Added ROW IOScheduler
Disabled CRC check in MMC for 30% extra performance with IO
block: Add BFQ IOScheduler
block: Add FIOSP scheduler
Faux Sound Control 2.0 - A sound hack driver by faux123 ported to sprd codecs by me
Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
Optimized square root algorithm
Governors enabled: ondemand, interactive.
IntelliPlug- Great balance between battery life and performance
Optimizations to SLUB memory allocator
Disabled MMC CRC check for extra 30% boost in IO
zRAM compression algorithm
Optimized Console FrameBuffer for upto 70% increase in Performance.
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Kernel Samepage Merging
Enabled arch power
Support for Larch Power feature (should improve Battery-Life).
Added bunches of TCP Congestion Algorithm
ARM: Removed various debug traces
Download:
Method1:
Install Vegito kernel updater app from Play Store
Download and Install.
Free Version
Paid Version
Method 2:
You can download from here
Vegito 4.5
Google+ Community (Beta testing and releases)
https://plus.google.com/u/0/communities/107248021342303532678
INSTRUCTIONS
Just flash the zip in twrp and you are good to go!
XDA:DevDB Information
Vegito Kernel , Kernel for the Samsung Galaxy Core Prime
Contributors
Dreamstar
Source Code: https://github.com/DreamStar001/android_kernel_samsung_coreprimeve3g_vegito
Kernel Special Features:
Version Information
Status: Beta
Created 2016-09-08
Last Updated 2017-05-22
Reserved
Changelog
Vegito 4.2 - 11/April/2017
Code:
- Now powered by AROMA Installer.
- Faux Sound Control 2.0 - A sound hack driver by faux123 ported to sprd codecs by me
- Huge update to kernel.org mainline 3.10.105
- Support Fsync & Software CRC Control.
- Smart ramdisk patching mechanism- low size, wider compatibility
- NOATIME and NODIRATIME by default
- Compatible with all roms? ( Not tested yet )
Vegito 3.0 -09/Nov/16
Code:
-Upstream update to 3.10.102
-SELinux set to permissive
-Disabled Gentle fair sleepers
-Overclocked to 1.4GHz
-Added frandom driver
-Added ThunderPlug CPU hotplug
-Added lionfish governor
-Enabled arch power
-Dynamic Fsync Control
-Other Performance improvements
-ARM: Removed various debug traces
Vegito 2.0 - 20/Sep/16
Code:
-Added Bunches of TCP Congestion Algorithm
-Added Fiosp , Sioplus , Zen Scheduler
-Added CPU Hotplugs ported by @doesnexits
-IntelliPlug
-MSM Hotplug
-Bricked Hotplug
-Alucard Hotplug
-init.d support
-Automatic busybox installation
-Improved boot time
-Other optimizations
Vegito 1.0
Code:
- Initial Release
Wait
It's a kernel but we flash a Boot.img in boot sector?
Also can't i just use apps like Rashr?
ETheHedgehog said:
Wait
It's a kernel but we flash a Boot.img in boot sector?
Also can't i just use apps like Rashr?
Click to expand...
Click to collapse
Flashing via recovery is recommended as stated in OP. Don't bomb thread with stupid questions.
What app would you recommend so that we can further tweak, or adjust the settings?
Paolonicus said:
What app would you recommend so that we can further tweak, or adjust the settings?
Click to expand...
Click to collapse
Use kernel adiutor .
Gamersab said:
Flashing via recovery is recommended as stated in OP. Don't bomb thread with stupid questions.
Click to expand...
Click to collapse
Thanks for being so "polite" ._.
I'll test this when i can
There are no CPU Hotplugs.
Paolonicus said:
There are no CPU Hotplugs.
Click to expand...
Click to collapse
Hello sorry about the delay check thread again i updated link ( vegito 2.0 )
Regards
Hello! Thanks for your work. In the 2nd version as well as in the first time is not displayed in the use of frequencies CPU Spy Plus-Free. What can you say about this?
BoxaS said:
Hello! Thanks for your work. In the 2nd version as well as in the first time is not displayed in the use of frequencies CPU Spy Plus-Free. What can you say about this?
Click to expand...
Click to collapse
Use kernel auditor
Request:
Next build should include NTFS support too.
Gamersab said:
Request:
Next build should include NTFS support too.
Click to expand...
Click to collapse
You need OTG?
doesntexits said:
You need OTG?
Click to expand...
Click to collapse
OTG is already supported by our device.
V2.0 Update
Changelog
Added Bunches of TCP Congestion Algorithm
Added Fiosp , Sioplus , Zen Scheduler
Other optimizations
I tried your custom kernel v 3.0 but it made bootloop for me, plz fix it
my device is core prime SM-G361H
Thanks at all
magaedy said:
I tried your custom kernel v 3.0 but it made bootloop for me, plz fix it
my device is core prime SM-G361H
Thanks at all
Click to expand...
Click to collapse
Are you running stock? If yes then enable OEM Unlock in developer options.
I'm already enabled OEM unlock, but still make bootloop
magaedy said:
I'm already enabled OEM unlock, but still make bootloop
Click to expand...
Click to collapse
Are you sure your phone model is g361h?
V-3.0 Update
Changelog
Upstream update to 3.10.102
SELinux set to permissive
Disabled Gentle fair sleepers
Overclocked to 1.4GHz
Added frandom driver
Added ThunderPlug CPU hotplug
Added lionfish governor
Enabled arch power
Dynamic Fsync Control
Other Performance improvements
ARM: Removed various debug traces
You know where to get the latest stuff, dont you?
Also first post updated
WarningI will not be responsible for anything that happens to your Redmi 2 after flashing this kernel. If you don't know how to unbrick your phone please don't make any modifications and stay with stock MIUI.
What is HexaTurbo?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HexaTurbo kernel is meant to be the best gaming kernel with awesome Zetsubou features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. For now the kernel dosn't include features like Undervolt and other features.
Zetsubou
This kernel is 100% based on Zetsubou kernel, that is the best performance/stability balance for redmi 2! So all new Zetsubou features will be added and optimized much as possible to deliver the best performance for Root and Non-Root users, what? non-root users? yes! this kernel was made to be used without root! so you can get the max performance in your games without using Kernel adiutor or EX kernel manager!! (cof... cof.... Pokemon GO)
Features:
NEON optimization
linux version 3.10.105
compiled with UBER GCC 4.9
GPU TurboClock support upto 620MHz
based on caf branch LA.BR.1.2.9_rbx.xx
General optimizations
True 1.2ghz clock
wake gestures: doubletap2wake, sweep2wake (up,down,left,right)
sound control for root users (not tested)
sweep2sleep support!
I/O schedulers: sio, deadline, fiops, noop, bfq, cfq, fifo, sioplus, vr, tripndroid and zen
governors: interactive, ondemand, conservative, performance, chill, relaxed, impulse, bioshock and despair
hotplug: lazyplug
KCAL advanced color control
adreno idler
DriveDroid support
advanced TCP congestion algorithms
force fast charge support
disabled crc check
FS: exfat, NTFS & sdcardfs support
f2fs updated upto v4.10-rc1-3.10
frandom support
reduced load average
fsync on/off support
Check my and Ahish source for other features
-- Download Now --
-- 2017 NewGen Logo Download --
Use EX KERNEL MANAGER or KERNEL ADIUTOR to control all features
Installation:
-Download the zip file and save it into the root directory of external storage
-Reboot to recovery mode and flash the zip file
-Reboot device
It's recommended to flash HexaTurbo only over stock kernel
I recomend using Custom installation for better choices, since you are a gamer!
Kernel will boot with max CPU/GPU frequencies that you select, ex: 1.21GHz/620MHz
Credits:
-ketut.kumajaya hats off to this man for all the work he did for Redmi 2
-osm0sis for his amazing AnyKernel script
-flar2 for his awesome features
-Ashish94 for helping me in almost everything!
-iamsubhranil for also helping me out!
XDA:DevDB Information
[Kernel][N-M][UBER-GCC][NewGen] HexaTurbo 2017, Kernel for the Xiaomi Redmi 2
Contributors
TecnoTailsPlays, Ashish94, iamsubhranil, All devs from kernel guides and mods
Source Code: https://github.com/TecnoAquaPlays/android_kernel_wingtech_HexaTurbo/tree/master
Kernel Special Features: This kernel is optimized for gaming, make your redmi 2 better and cooler!
Version Information
Status: Stable
Current Stable Version: 20170312
Stable Release Date: 2017-03-13
Created 2017-02-09
Last Updated 2017-03-24
Changelog 20170313 NewGen
-Fix random reboots on 2014819
-Stock CPU clock 1.21ghz (1.8ghz or 2.1ghz are fake overclock)
-Add KSM
-Sync Zetsubou sources
-Add F2FS & SDCARDFS support <---| Check Zetsubou thread for how to format to thease file system's
-LineageOS source
-Many other optimizations
Changelog 20170212 Equalizer
-Remove Fake CPU clocks
-Remove fake overclock to 2.11ghz and go back to "Supported 1.3ghz"
-Optimized aroma installer
-Minor things
GPU overclock is Real, and all clocks too, so I din't change anything for now
Changelog 20170210-something
-Totally new freequency table for GPU/CPU, you will get way smoother UI and games
-Minor fixes
Changelog 20170210-Fix
-Switch back to UBER gcc 4.9 becouse some issues with CPU
-Optimize aroma installer a little bit
-Testing new CPU overclock code
-Other minor stuff
Changelog 20170210
-Switch to UBER gcc 6.0
-Enable -O3 optimization
Changelog 20170209:
-Initial build
Can I flash with custom rom like AOSP?
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Yousef Algadri said:
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Click to expand...
Click to collapse
Sure, if it din't work, sent me dmesg and logcat
zmanz79 said:
Can I flash with custom rom like AOSP?
Click to expand...
Click to collapse
I'm not sure, since this kernel is for cm based roms, you can give it a try....
Good job, my Redmi 2 is fast. Amazing! I'm using mokee 7.1 nitghly 20170207
no sim cards detected after flashing the kernel but on dirty flashing the rom it gets detected.the rom is RR N latest .
Yeah techno is doing awesome work
AOSPExtended..
Custom installation not work for CPU and Color Control. I have to manually adjust all the setting on each reboot. Especially for CPU control, it need time to get 2112 , it keep lock down to 800 on each reboot. Anyway good performance .
bro 2.11 ghz for cpu...... wtf... cool man... installing it right away
Could you add another Hotplug? AutoSMP would be nice
taalojarvi said:
Could you add another Hotplug? AutoSMP would be nice
Click to expand...
Click to collapse
I will try
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
TecnoTailsPlays said:
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
Click to expand...
Click to collapse
Work in AOSP EX ?
andreymixmax said:
Work in AOSP EX ?
Click to expand...
Click to collapse
Look, I only use LineageOS, so I can't test in others roms, you will have to try by yourself
LOL, if someone is using the kernel, please open CPU-Z and kernel adiutor and sent me a screenshot of the freequencyes, I think the UBER 6.0 glitched the kernel
New build online!!
-Fix weird stuff on CPU-Z and other apps
-Switch back to UBER gcc 4.9 becouse CPU problems
-Edit aroma installer picture time
-Optimize CPU overclock code (Report if you had random reboots only with this kernel in LineageOS)
--DOWNLOAD--
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
taalojarvi said:
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
Click to expand...
Click to collapse
Did you try the latest build? this was fixed
-V- Kernel X
w/ AnyKernel2 for support on all LaOS 14.x -based ROMs!
import /disclaimer.md
Code:
I am not responsible for any damage done to your device/SD card/OTG cable/washing machine/toaster etc.
You are responsible for what you do.
If something brakes, it's on you!
Furthermore, functionality on older/newer ROMs not guaranteed.
Some may work.
Governors:
IntelliActive
IntelliDemand
Conservative set as default (from interactive)
Hotplugs:
IntelliPlug
Alucard
Use only one! And disable MPDecision!
Extra Features:
Forced Fast Charge v2
GPU: UC to 100MHz, OC to 533MHz
RAM: Added 133MHz (UC) and 566MHz (OC)
ZRAM: Enabled LZ4 compression + Auto resize to 500MB
Intelli_Thermal v3.0
Fixed ROM's init.d
Included kernel-side patch for BlueBorne vulnerability
KSM: Duplicate page check added (I recommend disabling KSM)
Simple GPU Algorithm (by faux123)
Script to force stop MPDecision + Auto enable IntelliPlug (can be disabled in /data/vkx.prop)
Power Suspend Mode v1.5
NTFS read/write support (write is limited, only supports overwriting existing files)
Config accessable from /proc/config.gz
More to come... Make suggestions and I will see what I can do...
Compiled using the Android NDK!
Installation:
You must have unlocked your bootloader!
Download the attached file!
Custom Recovery required
Make a backup of the boot partition for restore/uninstall purposes
Just download and flash the latest auto-install .zip file.
Then, use a kernel tweaking app or script (I use Kernel Adiutor).
To-Do:
Add more governors
Add some IO schedulers
Make suggestions...
Known Bugs:
Found one? Report it.
Source code:
-V- Kernel X
LineageOS (kernel)
Thanks to:
@mobiusm , for his general assistance, some code, and for putting up with me no matter how annoying I was/am/will be.
@likeadracula , for his general assistance and recommendations.
@faux123 , developer of anything starting with "intelli" and 'Simple GPU Algorithm'
@osm0sis , developer of AnyKernel2
and to anyone else I forgot!
XDA:DevDB Information
-V- Kernel X, Kernel for the LG G2 Mini
Contributors
Vagelis1608, mobiusm, likeadracula, faux123, osm0sis
Source Code: https://github.com/Vagelis1608/-V-_Kernel_X
Github Releases: https://github.com/Vagelis1608/-V-_Kernel_X/releases
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.3.1
Stable Release Date: 2018-04-13
Development Status: Abandoned :/
Created 2017-07-27
Last Updated 2018-06-27
Github Releases: https://github.com/Vagelis1608/-V-_Kernel_X/releases
Changelog:
v1.3.1:
Fixed the RAMDisk-based script
v1.3:
KSM: Tuned default parameters (still, I recommend disabling it)
GPU: UnderClock to 100MHz
Replaced Qualcomm's thermal driver (Thermald) with Intelli_Thermal v3.0 (by @faux123 )
Fixed ROM's init.d (Enforcing SELinux blocked it, now it works)
RAMDisk script: IntelliPlug is now automatically enabled when MPDecision is force-disabled
ZRAM: The RAMDisk-based script now sets it's size to 500MB (can be disabled in /data/vkx.prop: change persist.use.big.zram )
Swappiness is also set to 100. If you use a swap file, then this MUST be disabled (/data/vkx.prop: change persist.using.swap.file). Otherwise, problems will arise. You have been warned!
v1.2.1:
Included kernel-side patch for BlueBorne vulnerability
Enabled LZ4 compression for ZRAM
v1.2:
KSM: Duplicate page check added
Simple GPU Algorithm (by faux123)
Script to force stop MPDecision (can be disabled in /data/vkx.prop)
v1.1:
GPU Overclocked to 533MHz (from 450Mz)
RAM: Added 133MHz (UC) and 566MHz (OC)
Power Suspend Mode v1.5
Alucard Hotplug
v1.0.1 (hotfix):
Fix faulty frequency in IntelliDemand (two_phase_freq)
Tuned IntelliDemand and IntelliActive
Delete 'placeholder' file added in the RAMDisk by mistake in v1.0
Disabled device check
v1.0:
First release.
Reserved
MY POST
Oh, was not expecting this. What a pleasant surprise. Thank you.
Perhaps you could add spectrum support, you can find more info in here:
https://forum.xda-developers.com/android/apps-games/app-spectrum-kernel-manager-users-t3601542
cahiri0 said:
Oh, was not expecting this. What a pleasant surprise. Thank you.
Perhaps you could add spectrum support, you can find more info in here:
https://forum.xda-developers.com/android/apps-games/app-spectrum-kernel-manager-users-t3601542
Click to expand...
Click to collapse
Should be fairly simple to implement.
However, since this is a ramdisk mod, you can add it yourself using Android Image Kitchen or the injector in the third post on that thread. Be sure to set the correct frequencies.
That way, you will have it before I push an update with it implemented.
Vagelis1608 said:
Should be fairly simple to implement.
However, since this is a ramdisk mod, you can add it yourself using Android Image Kitchen or the injector in the third post on that thread. Be sure to set the correct frequencies.
That way, you will have it before I push an update with it implemented.
Click to expand...
Click to collapse
I flashed it after release, but after new system build clean flash I could not find time to make new profiles, as they are empty in injector. Hell, lately I can't find time to update system, I flash new one every 4-5 weeks.
is it working on RR6 ?
eicrag123 said:
is it working on RR6 ?
Click to expand...
Click to collapse
No. Only Nougat ROMs.
So, not RR6. But, if upgrade to RR7, then you can use it.
Hotfix release out!
v1.0.1 (hotfix):
Fix faulty frequency in IntelliDemand (two_phase_freq)
Tuned IntelliDemand and IntelliActive
Delete 'placeholder' file added in the RAMDisk by mistake in v1.0
Disabled device check
If you use an app that applies all values by default and you use IntelliActive or (especially) IntelliDemand, then force it to reload the new values for tunables.
Vagelis1608 said:
Changelog:
v1.0.1 (hotfix):
Fix faulty frequency in IntelliDemand (two_phase_freq)
Tuned IntelliDemand and IntelliActive
Delete 'placeholder' file added in the RAMDisk by mistake in v1.0
v1.0:
First release.
Click to expand...
Click to collapse
tryin to install it tells me unsupported device ? like is this for 620 or 618 ?
berraffarouk15 said:
tryin to install it tells me unsupported device ? like is this for 620 or 618 ?
Click to expand...
Click to collapse
I disabled device check in v1.0.1 and reuploaded it.
Download the v1.0.1 zip and let me know if it works.
Vagelis1608 said:
I disabled device check in v1.0.1 and reuploaded it.
Download the v1.0.1 zip and let me know if it works.
Click to expand...
Click to collapse
okay i'll give it a try now thnx
Vagelis1608 said:
Changelog:
v1.0.1 (hotfix):
Fix faulty frequency in IntelliDemand (two_phase_freq)
Tuned IntelliDemand and IntelliActive
Delete 'placeholder' file added in the RAMDisk by mistake in v1.0
Disabled device check
v1.0:
First release.
Click to expand...
Click to collapse
installed fine can u tell me which kernel manager u use ?
berraffarouk15 said:
installed fine can u tell me which kernel manager u use ?
Click to expand...
Click to collapse
I use Kernel Adiutor.
Also, which variant do you have (D620/D618)?
EDIT: Apply on boot has some issues (some settings don't get applied). To fix it enable the 'Script' option in Kernel Adiutor's settings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Vagelis1608 said:
I use Kernel Adiutor.
Also, which variant do you have (D620/D618)?
EDIT: Apply on boot has some issues (some settings don't get applied). To fix it enable the 'Script' option in Kernel Adiutor's settings.
Click to expand...
Click to collapse
okay thnx, and i hv d618 and ca i know if there is a kernel manager that whne installed to system apps it appears in the stock settings menu i mean like magisk does and supersu and other ,,,, u get me ?
berraffarouk15 said:
okay thnx, and i hv d618 and ca i know if there is a kernel manager that whne installed to system apps it appears in the stock settings menu i mean like magisk does and supersu and other ,,,, u get me ?
Click to expand...
Click to collapse
Oh, I get you...
That's one of the reasons why I use Kernel Adiutor.
(This is on RR7)
OC?
wild_fire said:
OC?
Click to expand...
Click to collapse
According to @mobiusm , the max and min frequencies are locked on the hardware level.
As such, overclocking and underclocking are impossible.
Well, unless you replace the actual CPU, so yeah...
He can correct me if I am wrong.
Vagelis1608 said:
According to @mobiusm , the max and min frequencies are locked on the hardware level.
As such, overclocking and underclocking are impossible.
Well, unless you replace the actual CPU, so yeah...
He can correct me if I am wrong.
Click to expand...
Click to collapse
Umm... But didn't this one guy make a kernel that oc's the CPU to 1.6ghz? It was for cm12 I believe...