HELLO!
I tried to flash stock ROM on my GRAND 2 [SM-G7105]
the file is ok, but when i try to start it does that
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ROM is
G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5
Click to expand...
Click to collapse
As mentioned above,
Code:
VERSION 4.4.2
USING
Resurrection 5.7.4
If it helps
I really need your help guys!
if you have any solution (I PREFER CUSTOM ROM)
[but i haven't seen any custom ROM for my device with NFC]
thanks!
CM13 and CM14 no camera work no dual sim RIl fix slow smooth scroll system and app slow lanch app
Smaali said:
CM13 and CM14 no camera work no dual sim RIl fix slow smooth scroll system and app slow lanch app
Click to expand...
Click to collapse
Camera has ben fixed i made a patch for it ;0
fufle said:
HELLO!
I tried to flash stock ROM on my GRAND 2 [SM-G7105]
the file is ok, but when i try to start it does that
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ROM is
As mentioned above,
Code:
VERSION 4.4.2
USING
Resurrection 5.7.4
If it helps
I really need your help guys!
if you have any solution (I PREFER CUSTOM ROM)
[but i haven't seen any custom ROM for my device with NFC]
thanks!
Click to expand...
Click to collapse
You don't downloaded the right version download the one for your carrier and region
And don't try to downgrade knox will block you if you try to downgrade
Related
I need some help with flashing.
I was trying to flash the Litening rom with odin.
But odin says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Litening_Rom_v6-1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
<ID:0/004> NAND Write Start!!
<ID:0/004> modem.bin
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So i cant flash any custom roms
So i have a Galaxy S3 from Verizon. Earlier i tried to downgrade my phone to 4.1.2. So i got everything i need and i open odin thenwhen i click start it will only say fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me. i have also broke my phone to where it says "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." and it wont boot up. If someone could help me and explain it to where noobs would understand it i would be very grateful.
Man I'm in the same boat
So i have a Galaxy S3 from Verizon. Earlier i tried to downgrade my phone to 4.1.2. So i got everything i need and i open odin thenwhen i click start it will only say fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.t ar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me. i have also broke my phone to where it says "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." and it wont boot up. If someone could help me and explain it to where noobs would understand it i would be very grateful.
benhix said:
So i have a Galaxy S3 from Verizon. Earlier i tried to downgrade my phone to 4.1.2. So i got everything i need and i open odin thenwhen i click start it will only say fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.t ar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me. i have also broke my phone to where it says "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." and it wont boot up. If someone could help me and explain it to where noobs would understand it i would be very grateful.
Click to expand...
Click to collapse
With the 4.3 update for the Galaxy S3 for Verizon came a new bootloader with Samsung Knox enabled which is a secure boot designed to prevent booting unsigned code. It also is designed to prevent people from circumventing the secure boot by downgrading firmware. As a result you have tripped the Knox security flag and bricked your device. However take a look at this guide http://forum.xda-developers.com/showthread.php?t=2581166
that hopefully will allow you to unbrick your device.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Hi everyone!
Hope you can help with this.
I have a Verizon Galaxy S4 with a completely dead (black) screen. It's not just cracked... i can't see anything.
I can connect it to my computer and see my files, so i know it's still alive, but i want to wipe it and sell it for parts, since the logic board and other stuff is still good.
This phone is NOT rooted.
I can't put it in debug mode because i can't see anything on the screen.
When i try to flash it with Odin, following the instructions for flashing to stock, i get the following:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried three or four times with the same results.
Any ideas what's going wrong?
I would prefer to reset to stock, but maybe i should just delete photos / contacts manually?
Thanks in advance for your help!
MaliaSleight said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Persistence pays off... i read a bunch of other posts about general Odin issues, and though i didn't find anything 100% the same as my issue, the theme was to try a different version of Odin and a different TAR. I did both and now i get PASSED!
Hello
I rooted my galaxy s7 edge using this link http://forum.xda-developers.com/tmobile-s7-edge/how-to/how-to-root-s7-edge-t3410470.
i started having issues with the root, ex the phone would get stuck on the AT&T screen.
I tried going back to the stock image using this link https://boycracked.com/portfolio/galaxy-s7-edge-att-sm-g935a-firmware/.
Now i can no longer use Odin to flash anything, and i get this error dm-verity verification failed, int the recovery section.
Please Help!!!!!!!!
Thank you
update
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)