[Sound Mods]ALL The working Audio and Sound Mods on Samsung Galaxy J7 2015 - Samsung Galaxy J7 ROMs, Kernels, Recoveries, & Oth

This thread is to Discuss and Provide Information on All the Audio Mods on Xda which are working on Various Roms of Our Device.
First of All, All the credits goes to the Makers/Developers of the Mod(s), I am only providing information on which of them work on our Device.
Lets Begin with this All Sound Mods which is made for Galaxy S6 which has
1. Viper4Androd
2. BeatsAudio
3. Dolby Atmos - Very carefully turn the volume on the Dolby is a very high volume.
This has been ported by me, Works on Most of ALL exynos devices, On our device, it works perfectly with my custom kernel found here : Optimax
DOWNLOADS
here's the link : MOD_ALL_SOUND_J7
Credits : @AlexMailOne
Next is Only ViperFX, This is also done by the same developer!
link : http://www.mediafire.com/file/l3t3ukzm3s3w6ei/ViPER4Android_FX_A4_6.0.1.zip
All these Audio Mods work on all Android 6.0.1 Roms, need to test on Lollipop roms!

Hi man
Very nice work in
J700f phone Android 6 kernel optimax 5.7
Tanks

Can i flash it for my j7 2016? Exynos 7870?

Will this mod boost the headset and speaker volume levels?

Hi pavan. Do you have any uninstall zips for this? In case I need to test both.
Thanks for these ?
Sent from my SM-G903M using XDA-Developers mobile app

Useful thread bro. Currently i am using A.R.I.S.E sound mod Detoronomy 2.1 and it`s the best one from my experience(amazing Sound).

Hey guys using note experience rom!
Is optimax 5.7 working for you guys!??
I guess every sound mods need permissive kernel and i decided to flash optimax 5.7 over note experience rom V2
I installed it and wiped my dalvik and cache but my phone got stuck in the boot logo!
Any suggestion ???
Sent from my SM-G935F using Tapatalk

For the question about J7 2016.
Hi, i've try this on my sm-j710 fn 2016 root, but not with the kernel specified on top.
Boot correct, but after lag on all my device and on sound panel realy more hard. For end no sound reconized in any apps.

DThrawn said:
For the question about J7 2016.
Hi, i've try this on my sm-j710 fn 2016 root, but not with the kernel specified on top.
Boot correct, but after lag on all my device and on sound panel realy more hard. For end no sound reconized in any apps.
Click to expand...
Click to collapse
Yeah for soundmods to work you need permissive kernel
And only then ur music players will adapt with the sound mods
Sent from my SM-G935F using Tapatalk

KnightlyNinja said:
Useful thread bro. Currently i am using A.R.I.S.E sound mod Detoronomy 2.1 and it`s the best one from my experience(amazing Sound).
Click to expand...
Click to collapse
Wow!!!
This sound mod REALLY rocks.
Tried it S5 Neo Port Rom v1.
http://forum.xda-developers.com/showthread.php?t=3379709
Try it ?
Sent from my SM-G903M using XDA-Developers mobile app

dodo2244 said:
Wow!!!
This sound mod REALLY rocks.
Tried it S5 Neo Port Rom v1.
http://forum.xda-developers.com/showthread.php?t=3379709
Try it
Sent from my SM-G903M using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi bro.. I am using Moluntic's A7 ROM.
and already have installed viper FX.
can you tell me steps to install ARISE ??

I think it will be better to remove the Viper FX first. Try dirty flashing your A7 rom, then flash the ARISE zip
ARISE Sound Systems Deuteronomy 2.1.zip

dodo2244 said:
I think it will be better to remove the Viper FX first. Try dirty flashing your A7 rom, then flash the ARISE zip
ARISE Sound Systems Deuteronomy 2.1.zip
Click to expand...
Click to collapse
I never installed any sound mods. But I want to try ARISE. But the problem is that in case I don't like it I would need to dirty flash. Does dirty flash mean that I'd lose my personal settings?
And which version of J7 phone did you try this on? 2015 or 2016?

Yes. But you could make a backup of data and system.
Sent from my SM-G903M using XDA-Developers mobile app

dodo2244 said:
Yes. But you could make a backup of data and system.
]
Click to expand...
Click to collapse
You mean /data and /system?
Also did you install the sound mod on the 2015 or 2016 version?

J7 2015. Take a full backup in TWRP. Restore only data and system to roll back.
Sent from my SM-G903M using XDA-Developers mobile app

dodo2244 said:
J7 2015. Take a full backup in TWRP. Restore only data and system to roll back.
Sent from my SM-G903M using XDA-Developers mobile app
Click to expand...
Click to collapse
Do you mean making a backup of the data partition? If so then I can't for my phone. For anything else I can. Let me know.

Backup ALL as usual in TWRP. If want to roll back, in advanced restore you can choose which partition to restore
Sent from my SM-G903M using XDA-Developers mobile app

Pavan l said:
This thread is to Discuss and Provide Information on All the Audio Mods on Xda which are working on Various Roms of Our Device.
First of All, All the credits goes to the Makers/Developers of the Mod(s), I am only providing information on which of them work on our Device.
Lets Begin with this All Sound Mods which is made for Galaxy S6 which has
1. Viper4Androd
2. BeatsAudio
3. Dolby Atmos - Very carefully turn the volume on the Dolby is a very high volume.
This has been ported by me, Works on Most of ALL exynos devices, On our device, it works perfectly with my custom kernel found here : Optimax
DOWNLOADS
here's the link : MOD_ALL_SOUND_J7
Credits : @AlexMailOne
Next is Only ViperFX, This is also done by the same developer!
link : http://www.mediafire.com/file/l3t3ukzm3s3w6ei/ViPER4Android_FX_A4_6.0.1.zip
All these Audio Mods work on all Android 6.0.1 Roms, need to test on Lollipop roms!
Click to expand...
Click to collapse
Can u port all these sound mod for J7 2016 FN model

dodo2244 said:
Backup ALL as usual in TWRP. If want to roll back, in advanced restore you can choose which partition to restore
Sent from my SM-G903M using XDA-Developers mobile app
Click to expand...
Click to collapse
You didn't read my last post. There's no way to back up the data partition on my phone even through TWRP. It has to do with data encryption.

Related

[Audio Mod] ●►Dolby Digital Plus for Note 4◄● UPDATE 2 5.0.1 - 5.0.2 - 5.1.1

[Audio Mod] ●►Dolby Digital Plus for Note 4◄● UPDATE 2 5.0.1 - 5.0.2 - 5.1.1
My good friend @thereassaad has been working really hard and made Dolby digital plus work on Note 4.
Devices this mod works:
N910c (5.0.1 5.0.2 5.1.1 Lollipop) with permissive kernel, tested by me.
Other devices it works (per users reports):
N910F
N910F and Echoe Rom v4.0
N900 Dr. Ketan rom
N910L stockroom
N910p sprint echoepop
N910H dr.ketan l2 "new" rom, ultimate kernel v.20
N910G Dr.Ketan Rom (may need to flash the file in this link http://forum.xda-developers.com/not...custom-rom-t2928568/post60276115#post60276115)
Moto X 2014 with CM12
Samsung Galaxy s3 with LP 5.0.2
SGN-4(SM-N910G) Stock Rom
HTC One m7 int. Lollipop 5.0.2 Sense 7 rom
GT-I9505 AlbeRom v3.1
Nexus 6 with Viper4
Nexus 5 5.1 cataclysm ROM.. Using Poweramp disable direct volume control to get it to work.
i9500 Magma Rom 3.5
Glamour Rom ported s6 for n910c 5.0.2
This should work on any deodexed roms (lollipop) with custom kernel.
Please note I will not be responsible if any damage cause to your phone, please make sure to make full backup before flashing.
Instructions:
First please make sure there is at least 25mb free space in system for installation without any errors or parsing Apk successfully.
You need to have permissive kernel for this to work.
●► download Dolby digital
Mega : https://mega.nz/#!RF40iKaZ!tFrXnzR52HcoiE9c22Rh43OQMKlb_tzfwRA8fDvBq98
Dropbox : https://www.dropbox.com/s/7x21tk06yti2s3h/DolbyDigitalPlus Ported UPDATE2 by thereassaad.zip?dl=0
Google : https://drive.google.com/file/d/0B70n3VD2X9p2RWdGQnQ4OGxXOEE/view?usp=docslist_api
Onedrive :
http://1drv.ms/1LaTcbB
pCloud :
http://pc.cd/vKhrtalK
●► go to recovery
●► flash Dolby digital plus
●► wipe dalvik and cache
●►reboot
Once rebooted, you will be able to see the app in the app drawer make sure dolbydigital plus is turned on.
It works great with viper4Androidfx which you can find here as far as I know viper4Androidfx works if you roms SE is permissive. You can read it on the thread.
If you get a FC after rebooting:
- NU player in developer option should be disabled
- if soundalive fc please remove it or freeze it with Titanium backup pro.
Current bugs:
Access from notification FC. Need to launch the app from the app drawer.
Credits: 100% to @thereassaad for his hard work
@hosgor45 nice to see this awesome sound mod working on N4 [emoji106][emoji106] enjoy N4 users[emoji6]
World Is Full Of Nice People. If U Can't Find One, Be One.
Just a doubt,,, Will this one work on N910G Lollipop.... \
and after installation... do i need to wipe dalvik cahe and cache partition or only dalvik cache?
franksmj said:
Just a doubt,,, Will this one work on N910G Lollipop.... \
and after installation... do i need to wipe dalvik cahe and cache partition or only dalvik cache?
Click to expand...
Click to collapse
It should working because i tested on dr.ketan N4 rom Ported to my n3 & its working fine
World Is Full Of Nice People. If U Can't Find One, Be One.
Does it work on N910F?
cornelito said:
Does it work on N910F?
Click to expand...
Click to collapse
It should working on N910F just before flashing full backup then flash with wipe cache/dalvick & reboot.
If not working then restore ur backup
World Is Full Of Nice People. If U Can't Find One, Be One.
Hi! Any chance for a KitKat version?
Works fine on Exynos (DN Rom v0.5). Thx.
It works not on my N910F with the actual Bobcat lollipop Rom , but ? for the work.
Gesendet von meinem SM-N910F mit Tapatalk
FC on ANATOLIA V6 ... N910C
Works perfectly with N910F and Echoe Rom v4.0
Amazing sound!
Thanks for your post
tsoureki said:
Works perfectly with N910F and Echoe Rom v4.0
Amazing sound!
Thanks for your post
Click to expand...
Click to collapse
Same here...
Enviado do meu SM-N910F através de Tapatalk
tsoureki said:
Works perfectly with N910F and Echoe Rom v4.0
Amazing sound!
Thanks for your post
Click to expand...
Click to collapse
Is there any way to get this working on the verizon dev edition?
Any chance for U variant kitkat 4.4.4?
mkim055 said:
Any chance for U variant kitkat 4.4.4?
Click to expand...
Click to collapse
On kk hmmmmm i guess i can fix it for kk but if OP downgrade to kk sure i can made & tested
if its working then will share it here [emoji6]
kheltek said:
Is there any way to get this working on the verizon dev edition?
Click to expand...
Click to collapse
Tested on ur Verizon & tell us if its working or not just before flashing do full backup then flash mod & wipe cache/dalvick
World Is Full Of Nice People. If U Can't Find One, Be One.
I have fc on n910f
rafik25 said:
I have fc on n910f
Click to expand...
Click to collapse
If u see thread someone told its working on n910f so it should working for u just wipe cache & dalvick after flashing mod okay
World Is Full Of Nice People. If U Can't Find One, Be One.
I know i flash this mod with a dalvik cache but it doesnt Work. I use myarom
this works great
Works great in N910L stockrom
But be aware!
you have to disable or delete
Soundalive 2.0
Package Adapt Sound 3.0
or else system will disable Dolby
Paydayhayday said:
Works great in N910L stockrom
But be aware!
you have to disable or delete
Soundalive 2.0
Package Adapt Sound 3.0
or else system will disable Dolby
Click to expand...
Click to collapse
Good to hear it works on N910L as well.
About the soundalive and adap sound it depends on your rom, I have tried it in 2 custom roms and I did not have to do anything, because custom rom already disable these.
enjoy!

Dolby ATMOS [R6.5]

http://forum.xda-developers.com/devdb/project/dl/?id=13100
How to install:
- Make a backup
Copy the zip " dolby atmos "in your SdCard
- Reboot in recovery mode
- Install "dolby atmos " .zip
wipe dalvik cache and restart the device
- Done!
Orginal post
here..
http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
https://www.youtube.com/watch?v=aM9g4r9QUsM
and watch ..listen amazing sound
https://www.youtube.com/watch?v=qiuKNdIOu8Q
gavsi said:
https://www.youtube.com/watch?v=qiuKNdIOu8Q
Click to expand...
Click to collapse
I use viper.Any conflict with dolby atmos?
Thanks
But your video ...Mate.....
Maybe this better:
https://www.youtube.com/watch?v=-asyYy_RlMY
Any conflict with dolby atmos?
Click to expand...
Click to collapse
ı have no idea ..but this mod especially game and movie
ı guess
kabirjedi said:
I use viper.Any conflict with dolby atmos?
Thanks
But your video ...Mate.....
Maybe this better:
Click to expand...
Click to collapse
gavsi said:
Any conflict with dolby atmos?
ı have no idea ..but this mod especially game and movie
ı guess
Click to expand...
Click to collapse
I'm using Viper too but in this version Dolby Atmos already came with it
ViPERAtmos 5.5 Sony Beats Edition
http://forum.xda-developers.com/showthread.php?t=3289075
How it works? I see the ViperAtmos post but I dont understand which version I need to flash and how it works. Can you help me? Just need to know which version I need to flash.
EDIT: I am on stock 6.0 based!
Vipery said:
How it works? I see the ViperAtmos post but I dont understand which version I need to flash and how it works. Can you help me? Just need to know which version I need to flash.
EDIT: I am on stock 6.0 based!
Click to expand...
Click to collapse
Look one post above yours ☝
Sent from my LG G4
welder73 said:
Look one post above yours
Sent from my LG G4
Click to expand...
Click to collapse
I am on stock, i mean which .zip i need to flash? "ViPERAtmos 5.5 Sony Beats Edition.zip" or "ViPERAtmos 4.8 Sony Beats Edition.zip" there are those two packages.
Vipery said:
I am on stock, i mean which .zip i need to flash? "ViPERAtmos 5.5 Sony Beats Edition.zip" or "ViPERAtmos 4.8 Sony Beats Edition.zip" there are those two packages.
Click to expand...
Click to collapse
Look again in my post...5.5...
Does this mode really ehance audio to where you will notice a difference?
Sent from my LG-H811 using XDA-Developers mobile app
LG G4 H815 v20G
Hi,
I am new here. But i find this Thread very intresting. Does anyone flash this on a LGG4 with version v20g???
And the second point is, what happend with the original state? When i used xposed a long time ago it said modified so i had to go back on stock for updating from v20d to v20g.
There are many rumors about the N version for the lgg4 so i dont want to miss the update
NardVa said:
Does this mode really ehance audio to where you will notice a difference?
Sent from my LG-H811 using XDA-Developers mobile app
Click to expand...
Click to collapse
It works fine with my Android 7.1 custom rom.
---------- Post added at 11:48 AM ---------- Previous post was at 11:46 AM ----------
vamplord said:
Hi,
I am new here. But i find this Thread very intresting. Does anyone flash this on a LGG4 with version v20g???
And the second point is, what happend with the original state? When i used xposed a long time ago it said modified so i had to go back on stock for updating from v20d to v20g.
There are many rumors about the N version for the lgg4 so i dont want to miss the update
Click to expand...
Click to collapse
Works fine with Android N custom rom.
Wow this is something. For those who don't see a difference you need to disable the music player's equalizer. (I'm on custom rom 7.1 as well)
Emin3ms said:
Wow this is something. For those who don't see a difference you need to disable the music player's equalizer. (I'm on custom rom 7.1 as well)
Click to expand...
Click to collapse
I have ROM 7.1.1 aicp and dolby working good?

Audio Performance Enhancements

All audio improvement tweaks for our one and only moto e 2nd gen at one place
How dude can u tell
i created this thread to know what everyone is using to enhance sound output and how those are working
i am using dolby atmos
sankhemka said:
i created this thread to know what everyone is using to enhance sound output and how those are working
i am using dolby atmos
Click to expand...
Click to collapse
I use ViPER4Android (I love the bass boost).
I use Viper Audio as well... and for profiles I use FS LiveBass HiFi, which is available on XDA.
yes i used viper4android too but it goes crazy sometimes it automatically increase and decrease sound but i think there was some problem with audio profile
sankhemka said:
yes i used viper4android too but it goes crazy sometimes it automatically increase and decrease sound but i think there was some problem with audio profile
Click to expand...
Click to collapse
I'm using the version which supports SeLinux Enforcing and am facing no such issue.
Sent from my XT1521 using XDA Labs
I use http://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516 + http://forum.xda-developers.com/android/software/mod-htc-beats-audio-beats-xperience-t3281603
Hey devs,
I also have to enhance my audio performance but i don't know how ?
I have a moto e2nd gen 3g XT1506 with CM 13.0 running .
I think Dolby atmos is best for audio performance enhancement but i don't know how to install dolby atmos in my phone .
Can anyone tell the complete instruction to install dolby atmos in my phone ?
SamdAbnormal said:
Hey devs,
I also have to enhance my audio performance but i don't know how ?
I have a moto e2nd gen 3g XT1506 with CM 13.0 running .
I think Dolby atmos is best for audio performance enhancement but i don't know how to install dolby atmos in my phone .
Can anyone tell the complete instruction to install dolby atmos in my phone ?
Click to expand...
Click to collapse
Just flash the zip and wipe cache. And don`t forget to have some recent backup in TWRP in case of something going wrong.
rootingguide said:
Just flash the zip and wipe cache. And don`t forget to have some recent backup in TWRP in case of something going wrong.
Click to expand...
Click to collapse
Can you send me the download link of dolby atmos supported for my device ?
---------- Post added at 08:35 AM ---------- Previous post was at 08:33 AM ----------
rootingguide said:
Just flash the zip and wipe cache. And don`t forget to have some recent backup in TWRP in case of something going wrong.
Click to expand...
Click to collapse
Also Can you send the instruction link for how to take complete backups and how to restore it if something goes wrong ?
SamdAbnormal said:
Can you send me the download link of dolby atmos supported for my device ?
---------- Post added at 08:35 AM ---------- Previous post was at 08:33 AM ----------
Also Can you send the instruction link for how to take complete backups and how to restore it if something goes wrong ?
Click to expand...
Click to collapse
1. Any Dloby Atmos for your Android version should work.
2. Search youtube about how to backup using TWRP or get some basic knowledge. I assume you don`t even have TWRP on your phone so i recommend you the latter if you want Dolby on your phone
rootingguide said:
1. Any Dloby Atmos for your Android version should work.
2. Search youtube about how to backup using TWRP or get some basic knowledge. I assume you don`t even have TWRP on your phone so i recommend you the latter if you want Dolby on your phone
Click to expand...
Click to collapse
When i rooted my phone i installed TWRP , I Will backup my phone using it..There are also several apps which help in backing up your phone .
Is TWRP the best or any other app for backing up ?
SamdAbnormal said:
When i rooted my phone i installed TWRP , I Will backup my phone using it..There are also several apps which help in backing up your phone .
Is TWRP the best or any other app for backing up ?
Click to expand...
Click to collapse
I use TWRP. it's perfect for me. I can switch ROMs without having to worry abt my data.
Sent from my Motorola XT1521 using XDA Labs

[ROM] ManuProN5 Astra Dream S8 UX ROM BETA v1 for SM-N915F/FY/G

https://forum.xda-developers.com/no...a-dream-s8-ux-rom-beta-v1-up04-06-17-t3667938
Ram kernel Rc6: https://forum.xda-developers.com/note-4/orig-development/kernel-ramkernel-t3472138
Kernel?
Sent from my SM-N915FY using XDA-Developers Legacy app
audiomarko said:
Kernel?
Sent from my SM-N915FY using XDA-Developers Legacy app
Click to expand...
Click to collapse
You could flash all versions of the RamKernel's if you have a bootloop, but i reccomend RamKernel v5 is the best with all N7 port roms.
I will ask for a link to RamKernel v5
installed , but only black screen is there .in N915G .
akira222 said:
I will ask for a link to RamKernel v5
Click to expand...
Click to collapse
https://www.androidfilehost.com/?w=files&flid=139411
amit2144 said:
installed , but only black screen is there .in N915G .
Click to expand...
Click to collapse
It need a clean flash. It sould work try this method
Flash the N7 Port Rom
Flash RamKernel v5
Flash the SuperSU
wipe cache/dalvik
Reboot & wait about 10-20mins
Which ramkernel to flash for N915G phone?
N910G_V5 or N915F_V5.
vkghadge said:
Which ramkernel to flash for N915G phone?
N910G_V5 or N915F_V5.
Click to expand...
Click to collapse
Flash the 915F cause of your model. It will work.
Any way to install n7 camera in this rom...
There are two different kernels, permissive and enforcing, which one is the better, or is there no big difference..
hingerl said:
There are two different kernels, permissive and enforcing, which one is the better, or is there no big difference..
Click to expand...
Click to collapse
It doesn't matter, only permissive gives you permission to change things like viper4android.
ufukan said:
It doesn't matter, only permissive gives you permission to change things like viper4android.
Click to expand...
Click to collapse
Thanks, another question, I was looking for something like rom control for changing e.g. battery icon, changing position or color for time etc. but all I can fund is Rom Control N4. bit there is not much I can do, do I have to look somwere else?
Sent from my HUAWEI M2-802L using XDA-Developers Legacy app
hingerl said:
Thanks, another question, I was looking for something like rom control for changing e.g. battery icon, changing position or color for time etc. but all I can fund is Rom Control N4. bit there is not much I can do, do I have to look somwere else?
Sent from my HUAWEI M2-802L using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes Dr. Ketan's tweaks doesnt support for xda free users, the tweaks are only for pro users, but If you want the tweaks, you could donation or use another rom, which is as same as Dr. Ketan's rom. Base is the same and has much more functionality tweaks in there (also It has Ketan's Rom Control). Just give a try. You will not regret it. I used it for a month maybe and was still smooth and battery friendly. Also it support voLTE if you are user of it. Moreover, Sidd realeased the v7, but it is buggy am waiting for the v8 Here is the link for the Enhaned Rom v6 by Sidd. Of course do a clean install
https://mega.nz/#!iFcAxaBQ!dJzUu8qo0k-7_LwwkW8VGybOsaM6hO03lNt7ozrsibg
AFTER INSTALLATION
INSTALL DIS SMALL APP
NORMALLY FOR FINGERPRINT ON
APPS.
https://mega.nz/#!2dUBRa6Q!7K4QduvzkE9sqBaWP2b5HcQ_q-sC3sIU6mfPPUGCk7k
ufukan said:
Yes Dr. Ketan's tweaks doesnt support for xda free users, the tweaks are only for pro users, but If you want the tweaks, you could donation or use another rom, which is as same as Dr. Ketan's rom. Base is the same and has much more functionality tweaks in there (also It has Ketan's Rom Control). Just give a try. You will not regret it. I used it for a month maybe and was still smooth and battery friendly. Also it support voLTE if you are user of it. Moreover, Sidd realeased the v7, but it is buggy am waiting for the v8 Here is the link for the Enhaned Rom v6 by Sidd. Of course do a clean install
https://mega.nz/#!iFcAxaBQ!dJzUu8qo0k-7_LwwkW8VGybOsaM6hO03lNt7ozrsibg
AFTER INSTALLATION
INSTALL DIS SMALL APP
NORMALLY FOR FINGERPRINT ON
APPS.
https://mega.nz/#!2dUBRa6Q!7K4QduvzkE9sqBaWP2b5HcQ_q-sC3sIU6mfPPUGCk7k
Click to expand...
Click to collapse
Thanks, I'll give it a go...
Sent from my SM-G935F using XDA-Developers Legacy app
Is there a solution for messed up colors and the black stripe on the left side of the screen?
Thank you!...
ufukan said:
Yes Dr. Ketan's tweaks doesnt support for xda free users, the tweaks are only for pro users, but If you want the tweaks, you could donation or use another rom, which is as same as Dr. Ketan's rom. Base is the same and has much more functionality tweaks in there (also It has Ketan's Rom Control). Just give a try. You will not regret it. I used it for a month maybe and was still smooth and battery friendly. Also it support voLTE if you are user of it. Moreover, Sidd realeased the v7, but it is buggy am waiting for the v8 Here is the link for the Enhaned Rom v6 by Sidd. Of course do a clean install
https://mega.nz/#!iFcAxaBQ!dJzUu8qo0k-7_LwwkW8VGybOsaM6hO03lNt7ozrsibg
AFTER INSTALLATION
INSTALL DIS SMALL APP
NORMALLY FOR FINGERPRINT ON
APPS.
https://mega.nz/#!2dUBRa6Q!7K4QduvzkE9sqBaWP2b5HcQ_q-sC3sIU6mfPPUGCk7k
Click to expand...
Click to collapse
So, I flashed the ROM you mentioned, the first try with the ram kernel didn't work, but at the second attempt I used the Emotion kernel
and this was a success, I found all the settings and now I need time to play with them
There are no problems so far, except for the Always On Display bug I had in all the other Note 7 ports...
I haven't really bothered to look for a fix in recent time... (is there one?)
BTW, is there a threat for this ROM, I haven't found any... yet...
hello there
i have sm n915G
i try to install as you said like
first install twrp
flash rom
flash kernel
flash beta supersu
wipe cache/dalvik
Reboot & wait about 10-20mins
but screen is only black, what should i do sir?
sumit.motivaras said:
hello there
i have sm n915G
i try to install as you said like
first install twrp
flash rom
flash kernel
flash beta supersu
wipe cache/dalvik
Reboot & wait about 10-20mins
but screen is only black, what should i do sir?
Click to expand...
Click to collapse
Hmm, bootloop problem. Which Kernel did you flash? Did you come from other MM rom. You must have the MM Modem and bL. If not Flash official 6.0.1 MM Rom via odin then repeat your steps. If your previous rom MM try this Kernels one of them must work:
Emotion Kernel r26 N7_Ported: https://mega.nz/#!Kdh11CrJ!l6PDPaE23...n_D-ArRC1gB9fs
or
RamKernel v5: https://www.androidfilehost.com/?w=files&flid=139411
hingerl said:
So, I flashed the ROM you mentioned, the first try with the ram kernel didn't work, but at the second attempt I used the Emotion kernel
and this was a success, I found all the settings and now I need time to play with them
There are no problems so far, except for the Always On Display bug I had in all the other Note 7 ports...
I haven't really bothered to look for a fix in recent time... (is there one?)
BTW, is there a threat for this ROM, I haven't found any... yet...
Click to expand...
Click to collapse
Nope for now there is no fix for the AOD. There is not a thread for this rom but we have a Telegram group. Dev's discuss all things there. If you want to join: https://telegram.me/joinchat/EYMSWECCdlZXQmVw4Iu_XA
hi,
all the links of mega are broken file doesnt exist is what i get from followin the ones for Sid's rom, fingerprint app or emotion kernel. the kernel link reportd invalid decryption key. pls update.
thanks
MY device is N915G, flash then FC:when connect to LTE then Reboot loop.
Naoufalstitou said:
Details here: https://forum.xda-developers.com/showpost.php?p=70581414&postcount=13230
Download link: http://www.mediafire.com/?e6tkcocadzo69td
RamKernel V5 link: https://www.androidfilehost.com/?w=files&flid=139411
Good luck
Click to expand...
Click to collapse
Hello,
My device is N915G, When flash all then FC:When reboot to setup connect to LTE then keep Reboot loop again. Why?
How to fix it?
Thanks.

Viper4Android Working

Has anyone gotten Viper4Android working on their Galaxy S9+ yet? If so, on which ROM or OS version?
UPDATE: I've found that this version of ARISE works perfectly on my S9+, here are my working arise_customize.prop settings:
I installed this over a ROM using Magisk, so I made sure to include the core and the magiskcompatibility module first.
I then selected ViPER4Arise 2.5.0.5, and didn't install anything else.
Yes, it is working great on LightROM on my S9+
VICosPhi said:
Yes, it is working great on LightROM on my S9+
Click to expand...
Click to collapse
I see LightROM includes Dolby Atmos, did it also then include v4a or did you flash a specific v4a package?
I flashed the V4A zip file via TWRP that I had downloaded from one of the S8 forums when I had S8 and it worked fine
VICosPhi said:
I flashed the V4A zip file via TWRP that I had downloaded from one of the S8 forums when I had S8 and it worked fine
Click to expand...
Click to collapse
Slick, thanks man! I'll give that a shot, I still have the Arise installer that used for my S8 myself so I'll see if that takes
Sent from my Galaxy S8 using XDA Labs
benmeroff said:
Slick, thanks man! I'll give that a shot, I still have the Arise installer that used for my S8 myself so I'll see if that takes
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
Yes that was it, the ARISE package. It works
Sent from my SM-G965U1 using Tapatalk
Hi
I have good sound with viper ?
I use version for magisk and is not good. Volume is poor
Its possible To give me one link of your viper ?
Thanks
VICosPhi said:
Yes that was it, the ARISE package. It works
Click to expand...
Click to collapse
So I've tried using the ARISE Magnum Opus 20170724 installer I had, but on any stock-based ROM it just bootloops the system. Which one works for you? I can see now I was several ARISE versions behind but would prefer not spend time waiting for my rather sizeable Nandroid to restore between testing versions if at all possible lol...
Sent from my Galaxy S8 using XDA Labs
I haven't tried it on stock yet. Maybe try a custom kernel first then try flashing it.
Sent from my SM-G965U1 using Tapatalk
It would be amazing if we could figure out which version of Viper works on the S9+ and maybe some simple steps..
babyboy3265 said:
It would be amazing if we could figure out which version of Viper works on the S9+ and maybe some simple steps..
Click to expand...
Click to collapse
benmeroff said:
Has anyone gotten Viper4Android working on their Galaxy S9+ yet? If so, on which ROM or OS version?
UPDATE: I've found that this version of ARISE works perfectly on my S9+, here are my working arise_customize.prop settings:
I installed this over a ROM using Magisk, so I made sure to include the core and the magiskcompatibility module first.
I then selected ViPER4Arise 2.5.0.5, and didn't install anything else.
Click to expand...
Click to collapse
Sent from my Galaxy S8 using XDA Labs
benmeroff said:
So I've tried using the ARISE Magnum Opus 20170724 installer I had, but on any stock-based ROM it just bootloops the system. Which one works for you? I can see now I was several ARISE versions behind but would prefer not spend time waiting for my rather sizeable Nandroid to restore between testing versions if at all possible lol...
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
i find flashing (smeejaytee - feelthebeats toolbox) from (ARISE+Deuteronomy+2.94+Modular+AROMA) fixes 9/10 issues faced after the magnum opus installation,
ive been using this method for a while now and not really had any problems, just a long winded process installing it all but havnt found A simpler method yet, hope this helps
Which versions of viper did you install? I have a lg g7 with snapdragon 845th in the magisk modules occur again and again sound problems with the volume. as described by a user here in the thread.
Sony92 said:
Which versions of viper did you install? I have a lg g7 with snapdragon 845th in the magisk modules occur again and again sound problems with the volume. as described by a user here in the thread.
Click to expand...
Click to collapse
I just tried flashing this and made sure to install the FeelTheBeats script that YZFR90 recommended in the Aroma installer, and after rebooting and disabling SELinux within Viper4Android settings (after enabling developer mode) it works perfectly for me on Magisk so far.
YZFR90 said:
i find flashing (smeejaytee - feelthebeats toolbox) from (ARISE+Deuteronomy+2.94+Modular+AROMA) fixes 9/10 issues faced after the magnum opus installation
Click to expand...
Click to collapse
OK thanks. because with the viper modules directly from magisk, i only have problems of sound and volume
install the zhuhang version via magisk
that is all
exocetdj said:
install the zhuhang version via magisk
that is all
Click to expand...
Click to collapse
I have only the problems with the volume and the bad quality.
benmeroff said:
I just tried flashing this and made sure to install the FeelTheBeats script that YZFR90 recommended in the Aroma installer, and after rebooting and disabling SELinux within Viper4Android settings (after enabling developer mode) it works perfectly for me on Magisk so far.
Click to expand...
Click to collapse
its not working.
the viper4arise apk crashes
Sony92 said:
its not working.
the viper4arise apk crashes
Click to expand...
Click to collapse
If you haven't already, I'd make sure any other V4A Magisk modules or APKs are all uninstalled, then try reinstalling just that ZIP.
Sent from my Galaxy S9+ using XDA Labs
Installation fails. ends with error 2xx
It may be that viper is not completely compatible with the snapdragon. I'm really restless. have already tried several versions

Categories

Resources