Version:
J700PVPU1APH4_J700PSPT1APH4_J700PVPU1APH4_HOME
Download link:
https://drive.google.com/file/d/0B6_i7gSz4xn3THI5bm94MnZ5Q1E/view?usp=drivesdk
INSTALL:
Use Odin to flash Rom!
NOTE:
If your phone has been rooted you must use either CF-Auto-Root or use my custom TWRP(recommended)or the Original TWRP and then just install the latest UPDATE-SU.zip to regain root access!
Credits: sammobile.com
can i just flash this over my current stock rom
javar19 said:
can i just flash this over my current stock rom
Click to expand...
Click to collapse
yes but you will regain all bloat
Starchild2k said:
Version:
J700PVPU1APH4_J700PSPT1APH4_J700PVPU1APH4_HOME
Download link:
https://drive.google.com/file/d/0B6_i7gSz4xn3THI5bm94MnZ5Q1E/view?usp=drivesdk
INSTALL:
Use Odin to flash Rom!
NOTE:
If your phone has been rooted you must use either CF-Auto-Root or use my custom TWRP(recommended)or the Original TWRP and then just install the latest UPDATE-SU.zip to regain root access!
Credits: sammobile.com
Click to expand...
Click to collapse
Can I flash this via odin after using your twrp to fix my soft bricked phone method? I still have your twrp installed
nvm works fine. so how are you coming with cm13?
Sent from my SM-J700P using XDA-Developers mobile app
Hi. I am new flashing phones. I have an j700p with "custom binary blocked by frp" message. i was using it in argentina. If i flash this rom to my phone, is it going to work? Thanks.
suarezjf said:
Hi. I am new flashing phones. I have an j700p with "custom binary blocked by frp" message. i was using it in argentina. If i flash this rom to my phone, is it going to work? Thanks.
Click to expand...
Click to collapse
1-first you need to unlock your device bootloader , on the phone, go to Settings > About Device then scroll down to find Build number and tap it 7 times to enable Developer Mode
2-next go to Settings > Developer options then set OEM unlocking to on
Then try with Odin
Thanks
Can we get an updated version? Normally I'd download from sam site but 1.5gb download with free account at 15kbs is ridiculous. You'd think they would provide better bandwidth for their support site and not try to have you pay a subscription...
h3xkore said:
Can we get an updated version? Normally I'd download from sam site but 1.5gb download with free account at 15kbs is ridiculous. You'd think they would provide better bandwidth for their support site and not try to have you pay a subscription...
Click to expand...
Click to collapse
I use SamFirm (here is a direct link if needed), it downloads the firmware from Samsung's servers and decodes the file to a flashable format.
Use "SM-J700P" in the model box, and one of these three region codes in the "Region" box
VMU - Virgin Mobile
SPR - Sprint
BST - "Australia (Boost Mobile) (BST)" is what it says on updato.com (formerly sammobile.com)
XAS - I have looked in threads on XDA and found that this is the "unlocked" version, use at your own risk, probably has the least bloat.
Or if your phone is still functioning download this handy little app that will tell you everthing you need to enter to get an update for your current FW.
Make sure the checkbox beside "Auto" is checked and click "Check Update" now go to the right panel, click the checkbox for "Decrypt automatically" and click "Download"
There ya go, I tried to make it as simple as possible and to give you the details you need, because I'm dumb and miss out on the obvious sometimes, so I make sure no one has that issue.
LexignisOfficial said:
I use SamFirm (here is a direct link if needed), it downloads the firmware from Samsung's servers and decodes the file to a flashable format.
Use "SM-J700P" in the model box, and one of these three region codes in the "Region" box
VMU - Virgin Mobile
SPR - Sprint
BST - "Australia (Boost Mobile) (BST)" is what it says on updato.com (formerly sammobile.com)
XAS - I have looked in threads on XDA and found that this is the "unlocked" version, use at your own risk, probably has the least bloat.
Or if your phone is still functioning download this handy little app that will tell you everthing you need to enter to get an update for your current FW.
Make sure the checkbox beside "Auto" is checked and click "Check Update" now go to the right panel, click the checkbox for "Decrypt automatically" and click "Download"
There ya go, I tried to make it as simple as possible and to give you the details you need, because I'm dumb and miss out on the obvious sometimes, so I make sure no one has that issue.
Click to expand...
Click to collapse
Wow very useful. Only problem is i don't have internet on my laptop or unlimited hotspot. Is there a similar app?
I didn't find an app but i found a site
http://updato.com/firmware-archive-select-model
h3xkore said:
Wow very useful. Only problem is i don't have internet on my laptop or unlimited hotspot. Is there a similar app?
I didn't find an app but i found a site
http://updato.com/firmware-archive-select-model
Click to expand...
Click to collapse
Next time just look for it on an apk mirror, apologies.
QUOTE=LexignisOfficial;74537952]Next time just look for it on an apk mirror, apologies.[/QUOTE]
Wait what? I meant an app that would download the firmware at a decent Speed. Sounds dumb now that I'm repeating it. Anyways minz posted a link of a more updated version with MUCH faster speeds.
https://www.androidfilehost.com/?fid=817550096634784392 for anyone wanting it. Thanks @minz1
h3xkore said:
Wait what? I meant an app that would download the firmware at a decent Speed. Sounds dumb now that I'm repeating it. Anyways minz posted a link of a more updated version with MUCH faster speeds.
https://www.androidfilehost.com/?fid=817550096634784392 for anyone wanting it. Thanks minz1
Click to expand...
Click to collapse
IDK why you would be looking for an app to download firmware you'd have to flash via Odin, very strange...
The app I referred you to is an app that gives you the region code and ID with which you need to enter into SamFirm to download the latest package for your device manually, sorry if there was any confusion.
LexignisOfficial said:
IDK why you would be looking for an app to download firmware you'd have to flash via Odin, very strange...
The app I referred you to is an app that gives you the region code and ID with which you need to enter into SamFirm to download the latest package for your device manually, sorry if there was any confusion.
Click to expand...
Click to collapse
No like i said was stupid. Thanks for pointing me in the right direction. Just wanted a way to download the firmware faster than 15kb/s
which android is it marshallow or nougat
which android is it marshallow or nougat
virgin mobile Galaxy J700P
Abhijith12 said:
which android is it marshallow or nougat
Click to expand...
Click to collapse
It's 6.0.1 there is a 7.1.1 link on the 7.1.1 DEODEXED thread !
---------- Post added at 12:47 PM ---------- Previous post was at 12:45 PM ----------
Abhijith12 said:
which android is it marshallow or nougat
Click to expand...
Click to collapse
It's 6.0.1 there is a 7.1.1 Firmware link on the 7.1.1 DEODEXED thread !
Copyed the link here
https://drive.google.com/drive/folders/1Ap1juibO37RXrKesAFSL1CybstM76F0b?usp=sharing
Related
this video show you how to update your t-mobile samsung galaxy s5 to ( g900ptuvu1gpe1 ) the official
android marshmallow 6.0.1 using odin
MOD EDIT: Link removed.
Redirecting forum users to pay-per-click links is not allowed.
(download links of the firmware and odin is in the video description )
Instructions
download the firmware
Extract (unzip) the firmware file
Download latest odin version
Extract Odin ZIP file
Open Odin
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button,
(Rmember to backup your data and try this in your own risk)
Just how I did it and rooted just as easy.
BCrossan said:
Just how I did it and rooted just as easy.
Click to expand...
Click to collapse
t-mobile is not complicated as some other companies devices .
you can also see : Unlock T-mobile Galaxy S5 (SM-G900T) to work on any network
http://forum.xda-developers.com/tmo...nlock-t-mobile-galaxy-s5-sm-g900t-to-t3388463
Sorry to be late to the party but I am restoring a friends' S5 back to stock. Does this also update the bootloader and modem? If not where can I find those specific files?
Thanks in advance!
EDIT: he is on a very old version of the firmware... Is it safe to jump straight to this version?
would i be able to go to this from cm13?
Can you provide similar instructions on how to root it after installing the marshmallow?
devoidx said:
Can you provide similar instructions on how to root it after installing the marshmallow?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmo...l/root-how-to-root-sm-g900t-firmware-t3358190
a mediafire link for the firmware update (g900ptuvu1gpe1) was added to the video description
lovely heart said:
a mediafire link for the firmware update (g900ptuvu1gpe1) was added to the video description
Click to expand...
Click to collapse
Nah, all it has is this broken/bugged out ad.fly stuff that tries to confuse you into install a virus instead. -- There's no way I'm turning off my adblocker for something that spawns that many pop-ups trying to hijack my browser.
BrainSlugs83 said:
Nah, all it has is this broken/bugged out ad.fly stuff that tries to confuse you into install a virus instead. -- There's no way I'm turning off my adblocker for something that spawns that many pop-ups trying to hijack my browser.
Click to expand...
Click to collapse
the links added to video comments
there any way to install this rom into a Samsung Galaxy S5 SM-G900M? i want to use wifi calling and i don found any way, My carrier is T-Mobile
leocord said:
there any way to install this rom into a Samsung Galaxy S5 SM-G900M? i want to use wifi calling and i don found any way, My carrier is T-Mobile
Click to expand...
Click to collapse
I flashed my g900v to the stock pe1 rom for T-Mobile - working now with wifi calling
milesius said:
I flashed my g900v to the stock pe1 rom for T-Mobile - working now with wifi calling
Click to expand...
Click to collapse
and with g900M?
leocord said:
and with g900M?
Click to expand...
Click to collapse
I couldn't say. You can try though. I threw caution to the wind, and this is my daily driver.
So I tried to root my phone and screwed it up (it was stuck on the Samsung boot screen).
Then I installed TWRP to try and recover it, but being the idiot I am I just ended up deleting the OS.
Now I don't know what to do, please help me.
Edit:
I have managed to fix this with the help of a user below!
What I did (for other users having this issue):
I downloaded the firmware for my device from Updato (link here).
Then used Odin 3 (version 3.12) and loaded the downloaded firmware into the AP slot.
I had to plug my device into the wall to allow it to charge (connecting it directly to my PC did not work), then I booted it up (it was stuck in the Samsung logo screen for a long while, but then it went into the setup).
DNeeded said:
So I tried to root my phone and screwed it up (it was stuck on the Samsung boot screen).
Then I installed TWRP to try and recover it, but being the idiot I am I just ended up deleting the OS.
Now I don't know what to do, please help me.
Click to expand...
Click to collapse
Use ADB file transfer using the fast boot command line. Then download a flashable zip rom and push it to your device then flash, you also want to get gapps if you want to have Google play.
Sent from my iPhone using Tapatalk
doughmay said:
Use ADB file transfer using the fast boot command line. Then download a flashable zip rom and push it to your device then flash, you also want to get gapps if you want to have Google play.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi man.
I'm sorry, but I am a real noob and not sure where to download a "flashable zip rom" from.
DNeeded said:
Hi man.
I'm sorry, but I am a real noob and not sure where to download a "flashable zip rom" from.
Click to expand...
Click to collapse
I'm very worried about this.
Also other solutions say to download the right firmware for my region from websites like SamMobile but my country isn't listed anywhere.
Sorry if I am giving unneeded information, but I am seriously stressed over this.
DNeeded said:
I'm very worried about this.
Also other solutions say to download the right firmware for my region from websites like SamMobile but my country isn't listed anywhere.
Sorry if I am giving unneeded information, but I am seriously stressed over this.
Click to expand...
Click to collapse
Did you search for SM-P355 ?
What country do you need for?
tys0n said:
Did you search for SM-P355 ?
What country do you need for?
Click to expand...
Click to collapse
Yes and my country is New Zealand.
DNeeded said:
Yes and my country is New Zealand.
Click to expand...
Click to collapse
Yeah, can't find anything either. You're sure it's SM-P355?
Can you go to download mode and check model number?
tys0n said:
Yeah, can't find anything either. You're sure it's SM-P355?
Can you go to download mode and check model number?
Click to expand...
Click to collapse
Just did and it says:
Product name: SM-P355
Click to expand...
Click to collapse
DNeeded said:
Just did and it says:
Click to expand...
Click to collapse
Maybe it's imported from another country then. I really don't know.
Do you remember what csc it had before wipe?
You can probably flash firmware from any country as long as it's unbranded. (not carrier specific)
I've done it a lot on all my phones to get the latest updates faster. I've had no problems at all.
tys0n said:
Maybe it's imported from another country then. I really don't know.
Do you remember what csc it had before wipe?
You can probably flash firmware from any country as long as it's unbranded. (not carrier specific)
I've done it a lot on all my phones to get the latest updates faster. I've had no problems at all.
Click to expand...
Click to collapse
No idea what the CSC was.
I will try installing another regions firmware.
You think I'll be able do that and then use Kies emergency firmware recovery to reinstall the original firmware? (Sorry if that doesn't make sense, again I don't really know what I am doing).
Appreciate your help mate.
tys0n said:
Maybe it's imported from another country then. I really don't know.
Do you remember what csc it had before wipe?
You can probably flash firmware from any country as long as it's unbranded. (not carrier specific)
I've done it a lot on all my phones to get the latest updates faster. I've had no problems at all.
Click to expand...
Click to collapse
Hey! I just managed to download the firmware from Updato and I am very relieved to let you know that I was able to boot up the tablet and it worked successfully!
All my files are gone, but that's alright, I deserve that for being and idiot and screwing up in the first place!
Just some final questions: Since the firmware region is "Indonesia", what exactly does this mean?
From my Google searches I see that firmware region doesn't mean much, just a few settings are different (such as having the language automatically on Indonesian). Is this true, or will I encounter any issues regarding this, since I am in a different region?
I appreciate your help and advice! You are a very good person and a valuable member of this community.
Thank you!
Good you got it going, and thank you for your kind words
You're right. It's mainly just small regional differences and as long as the phone/tablet isn't locked to specific carrier it usually works just fine with any csc.
Has anyone found any working links to download the XAR version for US firmware for SM-T820? I can not find them anywhere. Would like to attempt root but definitely want the firmware to fall back on. If anyone has a link to the firmware it would be much appreciated
boobster2 said:
Has anyone found any working links to download the XAR version for US firmware for SM-T820? I can not find them anywhere. Would like to attempt root but definitely want the firmware to fall back on. If anyone has a link to the firmware it would be much appreciated
Click to expand...
Click to collapse
I used the BTU(UK) firmware, no issues, just changed the keyboard from UK to US.
boyofdestiny said:
I used the BTU(UK) firmware, no issues, just changed the keyboard from UK to US.
Click to expand...
Click to collapse
I'm also running BTU/UK firmware in lieu of my native XAR. Aside from my tablet devoloping a somewhat charming Brittish accent, I have had/noticed any issues.
Thanks, I will DL that one just in case.
Guys, I have a US device (t820) and just tried to install a European firmware. Whatever I do it won't allow me. I get an error unsupported dev_type (installing all the components of the firmware, BL, CSC, AP). Actually, downloaded the US firmware from the xda forum and that cannot be installed as well. hmmm
boyofdestiny said:
I used the BTU(UK) firmware, no issues, just changed the keyboard from UK to US.
Click to expand...
Click to collapse
Did you just install the UK version through odin without bootloader and can? I am getting error all the time. Not sure if I need to do something in addition (oem unlocked).
Sent from my SM-T820 using Tapatalk
I also installed the boatloader and the csc at the same time
Sent from my SM-T820 using XDA Free mobile app
boyofdestiny said:
I also installed the boatloader and the csc at the same time
Sent from my SM-T820 using XDA Free mobile app
Click to expand...
Click to collapse
I was doing that as well. Still getting an error. Did you install via odin? Are you rooted? Somebody told me to install via flashfire.
Sent from my SM-G935F using Tapatalk
Kyrillos said:
I was doing that as well. Still getting an error. Did you install via odin? Are you rooted? Somebody told me to install via flashfire.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
You may want to try this Odin version: Odin3_v3.12_PrinceComsy.zip
Kyrillos said:
I was doing that as well. Still getting an error. Did you install via odin? Are you rooted? Somebody told me to install via flashfire.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Like the previous post suggested, you may want to check which version of ODIN you are using - also have you turned on OEM Unlock in Developer Settings?
muniz_ri said:
You may want to try this Odin version: Odin3_v3.12_PrinceComsy.zip
Click to expand...
Click to collapse
Thank you. I will give it a try today. OEM Unlock is enabled. One more question, which of the two CSC files should I use, there is which has HOME as part of the file name. Thanks in advance.
I'm wondering if someone here can assist me. I picked up the 128GB version of the Tab S3 at my local Best Buy. I flashed TWRP and Magisk and didn't have any. Then I decided to try out the Flash v1.1 Kernel. Well after I flashed that kernel the Google app kept crashing on me so I decided to start from scratch. The only problem was I couldn't find the XAR firmware for my 128GB S3. I tried the UK firmware listed above and that almost works except that it limits my storage to 32GB instead of 128GB. Has anyone out there found any XAR firmware that can be downloaded? Any idea how to fix the storage issue?
Edit: After poking around I found the correct firmware at the link below.
http://updato.com/firmware-archive-select-model?record=857A7A7D73D111E7963AFA163EE8F90B
I need to install Android 6, but I can't seem to find a firmware upgrade that matches my version exactly.
What version is safe to use? I'm completely new to the android world, so I'm completely lost…
The closest I've found is a file named "Honor 5X_Firmware_KIW-L21_Android 6.0.1_EMUI 4.0_C432B330CUSTC432D001_Denmark.zip" but according to the PDF included in it I should only be used with versions:
KIW-L21C432B130CUSTC432D005
KIW-L21C432B130CUSTC432D006
KIW-L21C432B140
KIW-L21C432B300CUSTC432D002
Mine is kiw-l21c432b160.
Is it safe to use this one? Do you have any idea where I might find a suitable .zip if not?
Thanks for the help
nicocool84 said:
I need to install Android 6, but I can't seem to find a firmware upgrade that matches my version exactly.
What version is safe to use? I'm completely new to the android world, so I'm completely lost…
The closest I've found is a file named "Honor 5X_Firmware_KIW-L21_Android 6.0.1_EMUI 4.0_C432B330CUSTC432D001_Denmark.zip" but according to the PDF included in it I should only be used with versions:
KIW-L21C432B130CUSTC432D005
KIW-L21C432B130CUSTC432D006
KIW-L21C432B140
KIW-L21C432B300CUSTC432D002
Mine is kiw-l21c432b160.
Is it safe to use this one? Do you have any idea where I might find a suitable .zip if not?
Thanks for the help
Click to expand...
Click to collapse
What is cust version of you phone??
Did you try finding your firmware using firmware finder.?
I've given the full build number as it appears on the device (no CUSTxxx) suffix. Should I look somewhere else?
I'll check this firmware finder app once I have the opportunity.
nicocool84 said:
I've given the full build number as it appears on the device (no CUSTxxx) suffix. Should I look somewhere else?
I'll check this firmware finder app once I have the opportunity.
Click to expand...
Click to collapse
At bottom in about phone settings..cust version is written..
Oh right, silly me.
CUSTC432D001
nicocool84 said:
Oh right, silly me.
CUSTC432D001
Click to expand...
Click to collapse
Try firmware finder app from play store..
nicocool84 said:
Oh right, silly me.
CUSTC432D001
Click to expand...
Click to collapse
hwmt.ru can help
I have successfully downloaded a firmware using firmware finder.
When I go to Settings, update, local install, it is recognized and offers to install it. But then it boots to TWRP and fails to install. I guess I need to use the stock recovery? Any help appreciated...
And thanks!
nicocool84 said:
I have successfully downloaded a firmware using firmware finder.
When I go to Settings, update, local install, it is recognized and offers to install it. But then it boots to TWRP and fails to install. I guess I need to use the stock recovery? Any help appreciated...
And thanks!
Click to expand...
Click to collapse
Yes you need to to flash stock recovery...
Okay... So the closest I've found is this: https://androidfilehost.com/?w=files&flid=55194
But it's for B140, not B160. Apparently I have a very exotic model. Is it safe to flash or am I stuck here?
nicocool84 said:
Okay... So the closest I've found is this: https://androidfilehost.com/?w=files&flid=55194
But it's for B140, not B160. Apparently I have a very exotic model. Is it safe to flash or am I stuck here?
Click to expand...
Click to collapse
You said you want to upgrade to mm version..
This one is lollipop version...
hassanjavaid8181 said:
You said you want to upgrade to mm version..
This one is lollipop version...
Click to expand...
Click to collapse
Yes, now I'm starting to understand all these version numbers. My end goal is to install LineageOS, but I need MM first.
So now, I've switched back to Huawei eRecovery instead of TWRP, and tried two different firmwares (before B360 because apparently it prevents installing LineageOS), that were "validated with my IMEI". Settings>Update>Local>Reboot, installation starts I'm about to cry tears of joy and then around 15%, installation fails with no further details. I can then shutdown and reboot to my good ol' lollipop. Not sure what to do next...
nicocool84 said:
Yes, now I'm starting to understand all these version numbers. My end goal is to install LineageOS, but I need MM first.
So now, I've switched back to Huawei eRecovery instead of TWRP, and tried two different firmwares (before B360 because apparently it prevents installing LineageOS), that were "validated with my IMEI". Settings>Update>Local>Reboot, installation starts I'm about to cry tears of joy and then around 15%, installation fails with no further details. I can then shutdown and reboot to my good ol' lollipop. Not sure what to do next...
Click to expand...
Click to collapse
May be the package wasn't right...
You can go to old lollipop firmware??
You will have to download complete firmware file not the ota file..
Extract stock recovery from that firmware..put update.app in dload foler and flash via force upgrade....
You have region variant you have??
You have us variant!?
---------- Post added at 11:40 AM ---------- Previous post was at 11:33 AM ----------
http://www.stechguide.com/honor-5x-stock-marshmallow-firmware/
Download that firmware...
hassanjavaid8181 said:
May be the package wasn't right...
You can go to old lollipop firmware??
You will have to download complete firmware file not the ota file..
Extract stock recovery from that firmware..put update.app in dload foler and flash via force upgrade....
You have region variant you have??
You have us variant!?
---------- Post added at 11:40 AM ---------- Previous post was at 11:33 AM ----------
http://www.stechguide.com/honor-5x-stock-marshmallow-firmware/
Download that firmware...
Click to expand...
Click to collapse
I still have the same lollipop firmware my device was bought with. I don't think I have US variant. I brought it from (Amazon France)[https://www.amazon.fr/Honor-5X-Smar...d=1508409802&sr=8-2&keywords=huawei+honor+5x] and I am in France. The product title says it is unlocked but I had to do it myself.
I'll try your link as soon as I receive my SD card, because apparently it is required for this method. I still have this file from an older download, but was scared because a PDF file included in it mentioned it should be used with B140 and did not mention B160, but now that I've flashed a stock recovery meant for B140, this doesn't scare me anymore.
Thank you very much for taking the time to help a noob FOSS-enthusiast!
nicocool84 said:
I still have the same lollipop firmware my device was bought with. I don't think I have US variant. I brought it from (Amazon France)[https://www.amazon.fr/Honor-5X-Smar...d=1508409802&sr=8-2&keywords=huawei+honor+5x] and I am in France. The product title says it is unlocked but I had to do it myself.
I'll try your link as soon as I receive my SD card, because apparently it is required for this method. I still have this file from an older download, but was scared because a PDF file included in it mentioned it should be used with B140 and did not mention B160, but now that I've flashed a stock recovery meant for B140, this doesn't scare me anymore.
Thank you very much for taking the time to help a noob FOSS-enthusiast!
Click to expand...
Click to collapse
I will upgrade doesn't matter you are on 140 or 160...
Good luck.:good:
SM-G965U G965USQS4CSC8 & SM-G965U1 G965U1UEU4CSC7 Apr-21-19 Official PIE Firmware
Introduction:
Download official G965USQS4CSC8 (carrier) and G965U1UEU4CSC7 (unlocked) firmware for the SM-G965U and SM-G965U1 here. You can flash either onto a SM-G965U or SM-G965U1 using the patched Odin linked below. Flashing back and forth is safe because they are both on bootloader version 4.
Click to expand...
Click to collapse
Patch Level:
Carrier SM-G965U 04-01-19 (CSC8)
Unlocked SM-G965U1 03-01-19 (CSC7)
Click to expand...
Click to collapse
So, what is userdata?
A lot of people think this is carrier bloat only. However, userdata also contains the files necessary to activate carrier specific features. Without it, you may not be able utilize all of the carrier features that the phone is capable of providing. Please note that carrier userdata may not be available for your carrier.
Click to expand...
Click to collapse
SM-G965U1 (unlocked version) users read here:
Drawbacks of flashing carrier version G965USQS4CSC8 firmware on the unlocked phone (SM-G965U1):
CallerID no longer works unless you subscribe to carriers CallerID service.
Installs carrier bloat.
Benefits of flashing carrier version G965USQS4CSC8 firmware on the unlocked version phone (SM-G965U1):
Will enable all carrier specific features (video calling, etc, etc).
Click to expand...
Click to collapse
SM-G965U (carrier version) users read here:
Drawbacks of flashing unlocked version G965U1UEU4CSC7 firmware on the carrier version phone (SM-G965U):
Will disable all carrier specific features (video calling, etc, etc).
Benefits of flashing unlocked version G965U1UEU4CSC7 firmware on the carrier version phone (SM-G965U):
CallerID works without subscribing to carriers CallerID service.
Eliminates carrier bloat.
Click to expand...
Click to collapse
Installation Instructions:
Reboot to download mode:
Power off your Galaxy S9 Plus completely until it vibrates.
Press and hold the Volume Down + Bixby + Power buttons simultaneously. Release the buttons when you see the warning message.
Now just press Volume up button to continue.
Congratulations, you're now in download mode.
Connect your phone to your PC:
Start the patched Odin 3.13.1 that you downloaded from the provided link.
Plug the cord your phone came with into your phone and PC. Other cords may not work.
The Odin log will display a <ID:0/005> Added!! message once it connects.
Flash the firmware:
First, extract the compressed firmware to a folder on your PC.
In Odin, begin with the BL (bootloader) box, navigate to the firmware folder and select the file beginning with BL_.
Wait for each file to initialize and appear to the right of its corresponding box before attempting to proceed to the next step.
Now select the AP (Application Processor aka System) box, it should open the correct folder, then select the file beginning with AP_.
AP takes a while to initialize, don't worry.
Now select the CP (Core Processor aka modem) box, then select the file beginning with CP_.
Now select the CSC (Consumer Software Customization aka Carrier Settings) box, then select the file beginning with CSC_.
Choose HOME_CSC to not wipe your phone, or CSC_ (preferred option when switching between unlocked and carrier versions) to wipe your phone .
Optionally, select the userdata (User Data) box, then select the file beginning with USERDATA_.
Now, click start and wait for the magic.
Disconnect the cord when the phone reboots.
The phone should boot to recovery to automatically cleanup, then reboot again.
Click to expand...
Click to collapse
Downloads:
Download SM-G965U Firmware Here
Download SM-G965U1 Firmware Here
Download patched Odin Here
Click to expand...
Click to collapse
Your post title made it seem like the v2 version for the U1 was out...
Anyone spot a full download or patch for G965USQS2ARF4?
Canadian S9's are already running May security patch,build number G965WSWVLU2ARE6
Full version of G965USQS2ARF4 uploading now
Full version of G965USQS2ARF4 uploading now
You do realize how misleading the thread topic is? Your implying there's a U1 version of the ARF4 firmware.
The 965U ARF4 Odin files have also been out for days. I flashed 2 days ago.
todd3835 said:
You do realize how misleading the thread topic is? Your implying there's a U1 version of the ARF4 firmware.
The 965U ARF4 Odin files have also been out for days. I flashed 2 days ago.
Click to expand...
Click to collapse
It's not misleading, the firmware can be flashed on either version and it is official firmware. Further no one has posted the full version (includes HOME_CSC and USERDATA) for download until now. What's your beef?
Edit
rmarinella said:
This is the official G965USQS2ARF4 firmware for all SM-G965U Samsung Galaxy S9+ devices.
Click to expand...
Click to collapse
Thanks for posting this!
I had the ARE6 but the ARF4.
There is also an ARF5 out too! I think thats what @Ellywiggy said?
Scott said:
Thanks for posting this!
I had the ARE6 but the ARF4.
There is also an ARF5 out too! I think thats what @Ellywiggy said?
Click to expand...
Click to collapse
The ARF5 Isn't official, at least not yet. If you use apps like SamsungPay that rely on safety net, you're best off not to use that version, at least until or if it becomes official.
rmarinella said:
The ARF5 Isn't official, at least not yet. If you use apps like SamsungPay that rely on safety net, you're best off not to use that version, at least until or if it becomes official.
Click to expand...
Click to collapse
Gotcha!
Also, in the OP you could help clarify what the other guy was talking about by stating that this firmware is US Xfinty which is a Verizon MVNO. I think thats what the other guy may have meant. When you look at the OP quickly you do get the impression that this may be for the unlocked U1. But eitherway... Thanks for posting it! Much better than trying to download from SamMobile!!!
rmarinella said:
It's not misleading, the firmware can be flashed on either version and it is official firmware. Further no one has posted the full version (includes HOME_CSC and USERDATA) for download until now. What's your beef?
Click to expand...
Click to collapse
The reason I say it *was* misleading is because the title made it seem like there was a U1 version of the 2ARF2 release. While I'm not in that boat, there are people looking to swap carriers, which requires flashing to the U1 to remove carrier settings, before then flashing to a new carrier.
rmarinella said:
The ARF5 Isn't official, at least not yet. If you use apps like SamsungPay that rely on safety net, you're best off not to use that version, at least until or if it becomes official.
Click to expand...
Click to collapse
Samsung Pay does usually work on the unoffial / pre-release releases. Samsung Pay only relies on Knox.
todd3835 said:
The reason I say it *was* misleading is because the title made it seem like there was a U1 version of the 2ARF2 release. While I'm not in that boat, there are people looking to swap carriers, which requires flashing to the U1 to remove carrier settings, before then flashing to a new carrier.
Click to expand...
Click to collapse
Yep, that's me!
Waiting and Waiting....
Just got the ARF4 update for my SM-G965U1 with OTA this morning. So far so good.
sonymd said:
Just got the ARF4 update for my SM-G965U1 with OTA this morning. So far so good.
Click to expand...
Click to collapse
yeah I stared at it in shock and disbelief lol
sonymd said:
Just got the ARF4 update for my SM-G965U1 with OTA this morning. So far so good.
Click to expand...
Click to collapse
I just checked and I just got the OTA too!
Samfirm has the G965U1 ARF4 ODIN files available for download.
ChadH42 said:
Samfirm has the G965U1 ARF4 ODIN files available for download.
Click to expand...
Click to collapse
Anyone able to download and upload it here?
geoff5093 said:
Anyone able to download and upload it here?
Click to expand...
Click to collapse
I did. Flashed and all functions are working. I downloaded the TFN version.
ChadH42 said:
I did. Flashed and all functions are working. I downloaded the TFN version.
Click to expand...
Click to collapse
Do you have a link to it here? I'm on the T-Mobile firmware but want to flash it to Verizon, and need to flash it to the U1 unlocked firmware first.