Hello xda users,
Yesterday I flashed a custom rom (Darksense) on my elephone p9000. Everything went fine, that's what I thought.
My imei are changed to 111111111111111 and 222222222222222 , I cant receive sms and calls anymore.
Is there any way to change imei for the elephone p9000 ?
I was looking on engineer mode but...
There's no 'cds informations' on this phone.
Thanks in advance for any help.
reflash the stock rom and then follow the video https://youtu.be/w9POQK3kf6U
Reinstalled the Stock ROM but there's still no 'cds informations'
I'm really lost, cant receive any sms nor call :crying:
http://bbs.elephone.hk/thread-12457-1-1.html#.WBzMwPqLQdU
This method returns me that error: "Execution Warning : NVRAM database file is inconsistent with target load"
Still having the imei problem. My phone is a toy right now.
Can anyone give me some help ?
Been waiting for months now to see if the IMEI can be recovered. At this point it's a glorified PDA...
Moved on to bigger better things...
Managed to fix it !
Thanks to @jay98shankar
1) http://www.needrom.com/download/android-6-stock-20160401/ Sign up and download this (dont download the latest official rom(810) this is the only rom which can help you)
2) Flash using sp flash
3) Go to engineer mode you'll find CDS Information
4) Avoid formating your phone using sp tool just - formating made all this problem
Starkkk said:
Managed to fix it !
Thanks to @jay98shankar
1) http://www.needrom.com/download/android-6-stock-20160401/ Sign up and download this (dont download the latest official rom(810) this is the only rom which can help you)
2) Flash using sp flash
3) Go to engineer mode you'll find CDS Information
4) Avoid formating your phone using sp tool just - formating made all this problem
Click to expand...
Click to collapse
Trid this before but hell, try again.
Same results - after entering AT+EGMR"IMEI" (imei number, not IMEI....) I hit Send AT Command and get " INFO - This command is not allowed in UserBuild"
Still no love.....
@ultramag69
Add a space between AT+ and EGMR.
The command must looks like that:
For IMEI 1: AT+ EGMR=1,7,”YOUR NEW IMEI"
For IMEI 2: AT+ EGMR=1,10,”YOUR NEW IMEI"
Starkkk said:
@ultramag69
Add a space between AT+ and EGMR.
The command must looks like that:
For IMEI 1: AT+ EGMR=1,7,”YOUR NEW IMEI"
For IMEI 2: AT+ EGMR=1,10,”YOUR NEW IMEI"
Click to expand...
Click to collapse
Did as you said -
INFO.
AT command is sent:
+CME ERROR: 100
is displayed...
About ready to throw out the window....
Might just use as a codi remote... This is taking too much energy for a Peice Of Sh!t phone...
Download MauiMeta 3G, install the drivers for P9000. I think you can use the same drivers as SP flash tool. Run Mauimeta, choose something like "flash imei", laod file witch is named MDDB_**********.EDB. Shut down your phone, press on start and turn your phone on. Write your imei into the textfields and flash it. (For me it worked only with Stockrom)
Related
First I'm so sorry if my question is similar with another threads. But I'm pretty sure I have been looking for the answer around the internet and of course XDA developer for a week. I follow every guide and method I found. But it still not answer of my problem.
I flashing camera driver I've got from my friend backup using TWRP backup. Actually I only need to choose uboot only to install. But I'm in hurry so I accidentally choose everything includes NVRAM. Since then I've got wrong IMEI on my phone because the IMEI overwritten with my friend phone. But it's not a problem because I can restore my original IMEI with MTKDroid & Tools.
And the problem is my IMEI is now back and corrected. But there is no network detected on the phone. SIM card detected fine. When I go to EngineerMode by pressing *#*#3646633#*#* and open Radio Information on CDS I saw IMSI field was unknown and Radio Status is turning on and off rapidly.
What I have done is :
1. Full flashing with the stock ROM via SP Flash Tools.
2. Change the IMEI with MTK Droid Tools
3. Change the IMEI with AT command ... echo 'AT+EGMR=1,7,"myIMEI1"' >/dev/pttycmd1
No result. IMEI is correct but no network.
I believe this is not a hardware problem, so please help me to solve this problem. Because it's my only phone to communicate with my whole families. I really appreciate with your help. Thanks.
Ok guys, yesterday I was trying to flash a ROM and my IMEIs are erased and in attempt to get my IMEIs back my serial no is also erased, I have backup of my ROM can I get the Serial No. from backup of my ROM?
nice_guy75 said:
Ok guys, yesterday I was trying to flash a ROM and my IMEIs are erased and in attempt to get my IMEIs back my serial no is also erased, I have backup of my ROM can I get the Serial No. from backup of my ROM?
Click to expand...
Click to collapse
Hi
To set IMEI back using simple method follow th steps given below.
1. write *#*#3646633#*#* on your Dial pad. then an Engineer mode will ope.
2. Go to
Connectivity > CDS Information > Radio Information
3. For IMEI 1 select phone 1
Foe IMEI 2 select phone 2
4. In this window in irst line AT+ is already written,
just write E next to it, various commands will drop down,
5. If you selected phone 1, then select command AT+EGMR=1,7,""
If you selected phone 2, then select command AT+EGMR=1,10,""
6. write yor IMEI no. (you can find it on your mobile box or below battery) betwwen double inverted comma,
example. AT+EGMR=1,7,"911234567894567"
7. click on SEND AT COMMAND button,
8. Reboot your phone.
9. Check your IMEI using *#06# number on dial pad.
If your engineer mode is not opened, then go to settings > Apps.
then select all apps and open engineer mode.apk app
uninstall updates, and again try above steps.
If you are unable to do so try this one
MtkDroidTools 2.4.7 it will help you replace IMEI number
Press Thanks If I Helped You
I tried almost all the methods those are available except for one, that is SN_Station as my lappy is not accepting adb driver but none of the method helped me. Finally I went to Service center and I got my Motherboard replaced and now everything is working fine. I might have to write my wifi mac address using SN_Station and every time I flash new ROM I got a new wifi network named NVRAM Warning err 0x10, Though for now I have rectified my problem using this tutorial: http://forum.xda-developers.com/showthread.php?t=2197378
But I would write my wifi MAC address using SN_Station as my mac address changes every time I flash new ROM.
Basicly loaded a dual sim rom on a single sim Acer Liquid Z200.
was helped so far in this thread: http://forum.xda-developers.com/and...ms-cwm-root-acer-liquid-t2960787/post59482099 by @Shreps, but somehow i got this message that due to the 10 post rule i wasnt able to post anymore.
Downloaded the last zip file, but CMW doesnt seem to recognize my SD card.
Tried to load the rom with adb using sideload, but get the message cant find device.
Is it possible to load another version of CMW, mount it with USB and flash the zip file from the pc? And can i use any CMW file or are the custom made for each type of phone/brand?
Any other suggestions, got no clue what to do now
edit 18-3-15:
Tried to re-load CWM with Smart Phone Flash Tool and got this PMT changed for the ROM; it must be downloaded
Update:
Did a format of the device using Flash Tool, MTK USB poort was loaded and was able to flash the ROM for dual SIM.
@stef951
Try to flash this firmware from a Recovery :
update-Acer_AV0K0_Z200_1.012.00_EMEA_GEN1S-sds.zip
It's the stock firmware Single SIM EMEA GEN1s, you should back to your original firmware.
Click to expand...
Click to collapse
used recovery to install the firmware for sinlge SIM.
However now stuck with IMEI issues.
Used Mobile Uncle Tool and MTK Engineering to get into Engineering mode, but get this message: "cannot find engineer mode app"
*#*#3646633#*#* doesnt do anything. Possible that Engineer mode isnt installed? And is it possible to install it on my device?
Tried to load IMEI with MTK droid gave me a message "Changes will come into force after reset", but nothing changed -_-
Any other options on this IMEI matter.....?
Finally found a solution to enter Engineering mode, type *#*#2237332846633#*#*
When i try to change the IMEI with AT commad get a message AT command is failed to send
Tried Uncle tools, but unaible to acces engineering mode with this app.
I can enter a valid IMEI in MTK tools, but after reboot its still unknown.
Tried to copy a new MP0B_001 file to the NVD_IMEI folder
but all failed :crying:
Still searching for the solution, but if someone over here can help me out it would be appreciated.
Phone is not reading SIM card neither, is this because of the IMEI issue?
Acer Z200 Working again!!!
GOT MY PHONE BACK TO LIFE!!!
Lost the serial number and IMEI, had to write them back to NVRAM using Maui META tool.
Tutorial how to found on http://www.gizbeat.com/6058/how-to-...-for-mtk6582-mtk6572-mtk6592-mtk6589-mtk6595/
In the attached ZIP the files i used for the Maui META tool
Android_Gadget_CDC_driver, CDC driver didnt got installed so had to do this manually.
MTK6572 database: BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P3_1_wg_n
If you have the serial and IMEI number, go to method B under Restoring Values and add the manaully.
When loading the MTK6572 database i also got a warning: execution warning nvram database file is inconsistent with target load
Ignored the warning and just writed the serial and IMEI to the device.
Disconnected, rebooted and got a working serial and IMEI.
So happy that the damn thing got working again.
bro I saw your successful post about Acer Z200. but I can't install CDC Serial Driver .
. how to Install Manually ? Android_Gadget_CDC_driver, CDC driver.
Can you explain to me.
Thanks in advanced
I recently tried installing this rom https://forum.xda-developers.com/vivo-5/development/rom-aosp-6-blu-vivo-5-clones-t3489281 but it did not work very well.
It is now appearing as invalid IMEI.
Any idea what I can try?
I've tried the MTK Droid tool, MAUI, SN Writer but none of them recognize the smartphone.
Try with this:
PD: Have you problems with WiFi?
For a temporal solution you can use MTK Engineering Mode (The Monster) from the Play Store. I think maybe you need to be rooted.
MTK settings
Connectivity
CDS information
Radio Information
you will see AT+, delete the plus , add the plus sign choose the first option (in my case AT+EGMR=1,7,"")
Put the your EMEI in between the comas "EMEI" if theres an error put a space between the + and EGMR
for the second EMEI select the second option AT+EGMR=1,10""
This will work until the phone is reset
https://www.youtube.com/watch?v=6ZmE7TkLj6Q
It would be so good of any one of you to help me for this problem;
Recently, using SP Flash Tool, I accidentally chose the "Format All + Download" option when flashing a ROM to my Lenovo A850. I managed to flash the ROM but the biggest failure is, I cannot call and use data connection. I also have an error called "NVRAM Warning: Err 0x10" at the Wi-Fi section. At my notification bar, it shows "Invalid IMEI".
My phone is Dual SIM.
I somehow managed to fix my lost IMEIs by entering EngineerMode. After fixing and rebooting my phone, my notification bar showed "Emergency Calls Only" but I placed a working SIM in my phone. I still could not call and use data. I am sure that I lost many important things (MAC Address, IMEI, NVRAM, etc.) when I formatted my phone using SP Flash Tool.
I am clueless on how to fix this problem. I don't know what I should do. I just want my phone to be able to call. If not my Lenovo A850 is useless. I am so frustrated now and I am so scared.
If any one of you are able to help me, PLEASE NEVER HESITATE TO HELP ME. This issue is so serious that it doesn't let me to have a peace of mind.
PLEASE I BEG YOU DON'T IGNORE THIS PLEASE!!! Thank You for your kind attention!
Hi !
In order to fix the "Invalid IMEI", you have to :
Dial *#*#3646633#*#* then go to "Connectivity -> CDS Information" then click on "Radio information" then if your phone is dual SIM, press Phone 1.
In the textbox with writen "AT+" click on it then select AT+EGMR=1,7,"" and between the quotes, write your IMEI 1 number.
If you have an error "This command is not allowed in UserBuild", simply add a space between EGMR and AT+.
It will look like that : AT+EGMR=1,7,"YOUR IMEI HERE"
And for the NVRAM error, simply follow this guide : https://forum.xda-developers.com/showthread.php?t=2730486
Have a good day !
Hi! Thanks For the Reply.
SharkEzz said:
Hi !
In order to fix the "Invalid IMEI", you have to :
Dial *#*#3646633#*#* then go to "Connectivity -> CDS Information" then click on "Radio information" then if your phone is dual SIM, press Phone 1.
In the textbox with writen "AT+" click on it then select AT+EGMR=1,7,"" and between the quotes, write your IMEI 1 number.
If you have an error "This command is not allowed in UserBuild", simply add a space between EGMR and AT+.
It will look like that : AT+EGMR=1,7,"YOUR IMEI HERE"
And for the NVRAM error, simply follow this guide : https://forum.xda-developers.com/showthread.php?t=2730486
Have a good day !
Click to expand...
Click to collapse
Hi. Thanks for your help. I fixed NVRAM and IMEI. But still, I cannot call and use data even after I fix IMEI and NVRAM. The notification bar shows "Emergency Calls Only". I have inserted a working SIM Card but it is not being detected.
How will I get my phone to call?
Thank You very much!
Maevinarsh said:
Hi. Thanks for your help. I fixed NVRAM and IMEI. But still, I cannot call and use data even after I fix IMEI and NVRAM. The notification bar shows "Emergency Calls Only". I have inserted a working SIM Card but it is not being detected.
How will I get my phone to call?
Thank You very much!
Click to expand...
Click to collapse
Hi to fix that correctly , first root your device but fbefore that enable USB Debugging :
1. You can use KingRoot.apk , this one work for me if it doesn't work for you search for iroot.apk or frama-root.apk or some other.
https://kingroot.en.uptodown.com/android
2. Download SN Write tool ( we will use to put our Original imei number ).
https://snwritetool.com/download/sn-write-tool-v1-1752
3. Download MTK droid tool 2.5.3 (we need for restoring nvram backup) .
https://androidmtk.com/download-mtk-droid-tool
4. Download nvram backup for your device A850
https://mega.nz/#F!CQ1jjZSb!3wlZPapiIuRTuiqVWt4jKg
5. adbd Insecure v2.00 (install app just in case if your device is not recognized in MTK droid tool)
https://forum.xda-developers.com/sho....php?t=1687590
7. BusyBox.apk (install app just in case if your device is not recognized in MTK droid tool)
https://busybox.en.uptodown.com/android
Once you do that run adbd Insecure v2.00 app and check enable insecure adb now connect your phone on pc and run MTK droid tool , if is your device recognised press root to grant SU rights for root shell and click on OK.
now click on IMEI /NVRAM now click just on Restore choose nvram file which you downloaded put .bin file .tar file ignore and click on Reboot.
Now it should be working again .
To restore your Original imei , run SN Write tool go to System config check IMEI and check IMEI dual if your phone support dual sim and now load:
Modem DB and AP DB from data base folder which you can find inside your stock firmware make sure you don't make mistake by puting AP on MD1_DB or Modem DB on AP_DB click on Save now click on START , now you will see popup , write there your original IMEI 15 digits numbers click OK , take out the battery from your phone and put back now plug your device .
Once the process is finish you will See PASS your device will reboot and when is finish just exit from SN writter tool .
Follow this video if is easy for you :
https://www.youtube.com/watch?v=4uSxXFbzhZs
Good Luck