Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
Related
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Edit :-
Thank you all , i managed to unbtick using test point .!!
I know enough to tell you that I'd you can get fastboot yo work, its not bricked. Honestly I don't own the device. I own lg g3. And it might be different for this device but you can try pushing recovery from fasyboot mode using your PC. You might wanna google how to tbh and ask around ppl with similar device if possible. Pushing through fastboot/adb is most common so pushing recovery will format recovery partition and install/push new one. That will get you working recovery. (I hope). Happy flashing.
In fastboot check if bootloader is locked by running the device info command... It is not locked you have hopes... Use fastboot to flash fastboot rom package with modified emmc file and modded image...
Its locked
Only way is to do test point method or take it to a service center
#BATMAN# said:
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Click to expand...
Click to collapse
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Luiggi79 said:
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Click to expand...
Click to collapse
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
faced the same problem bro better give it in care if dnt wnt to give it to care just go to( http://en.miui.com/thread-235865-1-1.html ) or try ( http://xiaomitips.com/guide/fix-bricked-redmi-note-3-no-unlock-permission/ ) this if all didnt work go to care bro
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Luiggi79 said:
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Click to expand...
Click to collapse
im trying now! hopefully it will work :good::good:
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Stuck at mi logo
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
avrrv3689 said:
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
Click to expand...
Click to collapse
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
avrrv3689 said:
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
Click to expand...
Click to collapse
Read these carefully #DO AT YOUR OWN RISK#
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
http://forum.xda-developers.com/redmi-note-3/how-to/redmi-note3-prokenzo-guiderom-global-t3341102
:good: hit thanks if i helped you :good:
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
akhil17kr said:
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
Click to expand...
Click to collapse
Yes i think you can but im not 100% sure :good::good:
#BATMAN# said:
Yes i think you can but im not 100% sure :good::good:
Click to expand...
Click to collapse
Oh Lol , have asked many people but none of them are sure about this .. but i have asked from mi chat they said once bootloader is unlocked you can't lock it back by flashing MIUI roms as it's security feature . SO we can say unofficial method is problem if you like to switch to between ROM's but official one will not create any problems ..still not sure though have to ask who have done through Official method.
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
#BATMAN# said:
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Luiggi79 said:
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Click to expand...
Click to collapse
didn't work for me !:crying::crying:
hey there!
i need some help here please!
i was trying to unlock my bootloader (using this guide) and it went all fine till step 17 (command "fastboot oem unlock-go"), it said i got no permission for unlocking. and now i'm stuck here. the only thing that works is fastboot mode. from there i can switch to adb using the reboot-to-edl-patch, but then i'm stuck again. device-manager shows device as usual (ports COM & LPT) and the red light is blinking, but command "adb devices" replies an empty list. tried "adb kill-server", replugging phone, rebooting computer, still the same.
so what can i do now?
thanks for helping!
Hi. You can install a fastboot rom in edl-mode with mi flash. I recomend a developer rom for this action. Then you can try the unofficial unlock from the start, but i recomend the official unlock.
Odatosz said:
Hi. You can install a fastboot rom in edl-mode with mi flash. I recomend a developer rom for this action. Then you can try the unofficial unlock from the start, but i recomend the official unlock.
Click to expand...
Click to collapse
sorry, forgot to say that miflash does not show the device after i selected the rom. i need to do something before i can flash via edl-mode. but what?
Make sure that you have the correct drivers installed on a 64bit machine, with driver signature off. And you cant get adb device list from there, so thats normal. Try to install the 7.1.8 fastboot rom that should work.
Well even m in a same situation.... as u said ur mobile is giving u red led blinks.. ..
And in device Manger ur fone is showed as Qualcomm 900E instead of 9008 and that's the reason adb couldn't list ur device
All u need to do is do a Google search - xiaomi deep flash cable
shetty_chadda said:
Well even m in a same situation.... as u said ur mobile is giving u red led blinks.. ..
And in device Manger ur fone is showed as Qualcomm 900E instead of 9008 and that's the reason adb couldn't list ur device
All u need to do is do a Google search - xiaomi deep flash cable
Click to expand...
Click to collapse
phone is showed as showed as Qualcomm 9008, and meanwhile i'm able to flash fastboot-rom again. still can't unlock though
AnF replies: FAILED: <remote: oem unlock is not allowed>
finished. total time: 0.016s
drivers are installed correctly, i'm working in signature-off-mode.
tried 7.1.8 rom, can't unlock that either..
maybe a stupid question, but anyway: phone had miui version 8 before i started trying to unlock.. is something wrong with that?
thanks for helping!
no1dev said:
phone is showed as showed as Qualcomm 9008, and meanwhile i'm able to flash fastboot-rom again. still can't unlock though
AnF replies: FAILED: <remote: oem unlock is not allowed>
finished. total time: 0.016s
drivers are installed correctly, i'm working in signature-off-mode.
tried 7.1.8 rom, can't unlock that either..
maybe a stupid question, but anyway: phone had miui version 8 before i started trying to unlock.. is something wrong with that?
thanks for helping!
Click to expand...
Click to collapse
There is no problem with miui 8. You just have to follow the steps from this post: [Tips and Tutorials] Redmi Note 3 [ SnapDragon ] - Unlock the BEAST in Seconds!!! . Just google it, because i cant post links here... Make a efs partition backup before you proceed! With a bad flash you can lose your IMEI like lots on the forum did... I would say to unlock your phone with the official unlock. Good luck!
no1dev said:
phone is showed as showed as Qualcomm 9008, and meanwhile i'm able to flash fastboot-rom again. still can't unlock though
AnF replies: FAILED: <remote: oem unlock is not allowed>
finished. total time: 0.016s
drivers are installed correctly, i'm working in signature-off-mode.
tried 7.1.8 rom, can't unlock that either..
maybe a stupid question, but anyway: phone had miui version 8 before i started trying to unlock.. is something wrong with that?
thanks for helping!
Click to expand...
Click to collapse
Odatosz said:
There is no problem with miui 8. You just have to follow the steps from this post: [Tips and Tutorials] Redmi Note 3 [ SnapDragon ] - Unlock the BEAST in Seconds!!! . Just google it, because i cant post links here...
Click to expand...
Click to collapse
en.miui.com/thread-253680-1-1.html
abihary said:
en.miui.com/thread-253680-1-1.html
Click to expand...
Click to collapse
There you go. Don't forget to read my edit from the other post!
Odatosz said:
There you go. Don't forget to read my edit from the other post!
Click to expand...
Click to collapse
tried that, but no success in unlocking. same reply as mentoined above (FAILED: <remote: oem unlock is not allowed>)
is there any other rom i could try to flash? not to unlock the bootloader afterwards, but to just unbrick my phone?
I would recomend to install a global developer rom for now. And unlock your bootloader with the official method.
---------- Post added at 07:13 PM ---------- Previous post was at 07:09 PM ----------
Just install a developer ROM like you did before. Then you can decide what to do next. I would recommend to unlock your bootloader officially if you want custom ROMs on your phone.
good news: i finally managed to unbrick it!
flashing the fastboot 7.1.8 rom, and then flashing the original emmc_appsboot.mbn file via fastboot:
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot reboot
during reboot holding volume-up + power and starting mi pc suite
..and suddenly it's unbricked!
so happy right now!
Glad to hear that.
no1dev said:
hey there!
i need some help here please!
i was trying to unlock my bootloader (using this guide) and it went all fine till step 17 (command "fastboot oem unlock-go"), it said i got no permission for unlocking. and now i'm stuck here. the only thing that works is fastboot mode. from there i can switch to adb using the reboot-to-edl-patch, but then i'm stuck again. device-manager shows device as usual (ports COM & LPT) and the red light is blinking, but command "adb devices" replies an empty list. tried "adb kill-server", replugging phone, rebooting computer, still the same.
so what can i do now?
thanks for helping!
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
booshveg said:
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
Click to expand...
Click to collapse
It happened to me too. Tried many version of mi flash but it says error once hello packet and once not enough memory.
I was not able to boot up. I once again tried it.
Opened PC booted into edl mode. Flashed the ROM by proper settings by mi flash. It again showed error. Not enough memory. But this time I didn't turn my phone off. I straightly ran unlock bootloader.bat file and then flash twrp. Bat file. It worked and my phone rebooted into twrp. I wiped all data except microsd and flashed cm13 official because j need to boot up atleast. And now using it like charm flashing and installing any ROM of my choice
---------- Post added at 07:05 PM ---------- Previous post was at 07:01 PM ----------
This for other problem but may help you.
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
Yes even I got the same error when flashing fastboot ROM.. tried with older version of miflash... success... then use the batch files provided in the above post... everything will be fine..
One problem though fingerprint isn't working after flashing RR or any other custom ROM..
Help me please
My redmi note 3 is stuck on the charging logo.when I try to turn it on it shows mi and then shows the picture of a phone and a USB cable I cannot bypass it ,cannot access recovery. When I try to access recovery it goes to the testing screen .
Anyone who knows the solution to this please help me....:crying::crying:
I think accidently you deleted your twrp recovery.you can give a try by reinstalling twrp via adb tool.
I'm completely noob but you can give a try
Sorry for my bad english
SARATH NAIR said:
Help me please
My redmi note 3 is stuck on the charging logo.when I try to turn it on it shows mi and then shows the picture of a phone and a USB cable I cannot bypass it ,cannot access recovery. When I try to access recovery it goes to the testing screen .
Anyone who knows the solution to this please help me....:crying::crying:
Click to expand...
Click to collapse
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
ajeshmanu said:
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
Click to expand...
Click to collapse
No sir I haven't done anything.Its boot loader is still locked.I haven't rooted,or flashed any rom
ajeshmanu said:
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
Click to expand...
Click to collapse
Can you tell me a way to unlock the boot loader through fastboot...
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
SARATH NAIR said:
Can you tell me a way to unlock the boot loader through fastboot...
Click to expand...
Click to collapse
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
yes go thru the above guide
ajeshmanu said:
yes go thru the above guide
Click to expand...
Click to collapse
I will try this method. Does this method require to go to EDL?
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
This guide above is to return back your phone to a working MIUI.
If you just need to unlock bootloader to flash twrp/custom recovery, then Unlock it via official method
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
BTW, the guide above is specifically for redmi note 3 quallcomm/sd/pro, if you have different device, please look for your right fastboot rom in the list in the given thread. Good luck!
SARATH NAIR said:
I will try this method. Does this method require to go to EDL?
Click to expand...
Click to collapse
try this one
http://en.miui.com/thread-235865-1-1.html
ajeshmanu said:
try this one
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
yes you can try this one if you can't access fastboot. good luck!!
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
I did that and now I have a new problem
The phone is not turning back on.When I tried to turn on it shows mi logo and turns off.when I plug it in to charger there is a red notification light starts to blink .What shall I do..??
I have flashed a fastboot ROM through miflash and now my phone is not turning back on and just a red notification light starts to blink help..
SARATH NAIR said:
I did that and now I have a new problem
The phone is not turning back on.When I tried to turn on it shows mi logo and turns off.when I plug it in to charger there is a red notification light starts to blink .What shall I do..??
Click to expand...
Click to collapse
Did you finished flashing? No errors or something?
Try to check your bootloader if it is unlocked or not, use method 2
https://thebroodle.com/android/how-to-check-your-bootloader-is-locked-or-unlocked/
If it is locked, try to use this step to unlock
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
npredtorch said:
Did you finished flashing? No errors or something?
Try to check your bootloader if it is unlocked or not, use method 2
https://thebroodle.com/android/how-to-check-your-bootloader-is-locked-or-unlocked/
If it is locked, try to use this step to unlock
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
Click to expand...
Click to collapse
Phone is showing no recovery no fastboot.Just stuck on edl mode.
Then proceed with adeshmanu suggestion, http://en.miui.com/thread-235865-1-1.html
I forgot to mention while flashing the fastboot ROM I pasted a file to the ROM folder to unlock the boot loader.will this be the reason why my phone got stuck in the black screen while the notification led blinks
SARATH NAIR said:
I forgot to mention while flashing the fastboot ROM I pasted a file to the ROM folder to unlock the boot loader.will this be the reason why my phone got stuck in the black screen while the notification led blinks
Click to expand...
Click to collapse
what file did you pasted inside the rom folder? something like a unlock file for bootloader?
Maybe that's the thing why it didn't worked. The steps always work for me whenever I got into something.
Also, are you sure that you've downloaded the right fastboot rom for your device? Are you on redmi note 3 pro too?
npredtorch said:
what file did you pasted inside the rom folder? something like a unlock file for bootloader?
Maybe that's the thing why it didn't worked. The steps always work for me whenever I got into something.
Also, are you sure that you've downloaded the right fastboot rom for your device? Are you on redmi note 3 pro too?
Click to expand...
Click to collapse
I have pasted. The unlock file for boot loader
I am using redmi note3 snapdragon version
SARATH NAIR said:
Phone is showing no recovery no fastboot.Just stuck on edl mode.
Click to expand...
Click to collapse
npredtorch said:
Then proceed with adeshmanu suggestion, http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
proceed with above step...
Here is the link to fastboot rom for redmi note3snapdragon version (kenzo)
http://en.miui.com/a-234.html
and select "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download"
plz dont paste any other files to rom (first make it boot)
Hi guys, my redmi 5 plus is stuck on logo loading screen and i can only go for fastboot. Cannot neither turn off phone.
I tried with Mi Flash tool but program fail with "Can not find flash_all.bat". I tried different version of roms and Mitool, but still have this error. How can i repair my device? Thnak you all for the future responsed
Ps: sorry for my really bad english
I dont´know what you tried to do before to get this status or if you have an unlocked bootloader to perform some operation in fastboot mode. If you are in stock rom you can try enter to recovery and use MiAssistant feature is a kind of adb sideload in-built that you can use to reinstall again the rom onto your device. Here you will find some guide lines about this behind the concept http://www.xiaomitool.com/adb
SubwayChamp said:
I dont´know what you tried to do before to get this status or if you have an unlocked bootloader to perform some operation in fastboot mode. If you are in stock rom you can try enter to recovery and use MiAssistant feature is a kind of adb sideload in-built that you can use to reinstall again the rom onto your device. Here you will find some guide lines about this behind the concept http://www.xiaomitool.com/adb
Click to expand...
Click to collapse
You right sorry. I have Bootloader unlocked. My brick come becose of me trying to root the phone with "1clickrooter" for redmi5 plus. When phone rebooted on recovery he ask me for a password. No pin works on this pass requesto so i try to wipe cash, phone automatically reboot and stuck in logo screen. Cannot turn of or go to recovery, only action i can make is to go on fastboot mode.
So, i have news, i can go on recovery mode (recovery i have is called "Team Win Recovery Project 3.2.1.0"), but in order to make write action (now i can only read) request me a password, obviously neither 1 of my pass (sim pin/screen unlock) work.
Jackevolution said:
So, i have news, i can go on recovery mode (recovery i have is called "Team Win Recovery Project 3.2.1.0"), but in order to make write action (now i can only read) request me a password, obviously neither 1 of my pass (sim pin/screen unlock) work.
Click to expand...
Click to collapse
If you can reboot now to recovery twrp then just cancel when it prompts for a password and you have to format data in order to can reboot to system again
Jackevolution said:
You right sorry. I have Bootloader unlocked. My brick come becose of me trying to root the phone with "1clickrooter" for redmi5 plus. When phone rebooted on recovery he ask me for a password. No pin works on this pass requesto so i try to wipe cash, phone automatically reboot and stuck in logo screen. Cannot turn of or go to recovery, only action i can make is to go on fastboot mode.
Click to expand...
Click to collapse
SubwayChamp said:
If you can reboot now to recovery twrp then just cancel when it prompts for a password and you have to format data in order to can reboot to system again
Click to expand...
Click to collapse
Already done, now semms to be stuck on the same loading screen, baibe he installing apps? It taking sooo long...
i think this isn't working. It's just 20 minute that phone is stuck on "Mi" screen...
Nope, definetly not worked. There is a way to put filesin the phone from recovery?
Jackevolution said:
Nope, definetly not worked. There is a way to put filesin the phone from recovery?
Click to expand...
Click to collapse
Yes, you can reflash again the rom, put the rom zip in your adb folder and short the name as you can, and flash it using adb sideload, to do this tap on "advanced option" and then "adb sideload" in recovery menu and in adb terminal in your pc type adb sideload nameofrom.zip where nameofrom is te name of the rom, don´t forget the extension .zip as I wrote. TWRP will load the zip and flash it again and then you can flash Magisk to root device.
If you can´t see storage of device in your pc is cause it´s encrypted but you can perform adb sideload anyway
Jackevolution said:
Hi guys, my redmi 5 plus is stuck on logo loading screen and i can only go for fastboot. Cannot neither turn off phone.
I tried with Mi Flash tool but program fail with "Can not find flash_all.bat". I tried different version of roms and Mitool, but still have this error. How can i repair my device? Thnak you all for the future responsed
Ps: sorry for my really bad english
Click to expand...
Click to collapse
Look at the error you got every time "Can not find flash_all.bat" its mean that you are selecting invalid path, okay so here is correct method to flash via fast-boot method:
Download the latest fast boot rom zip one option is http://bigota.d.miui.com/V9.5.12.0....FA_20180525.0000.00_7.1_global_343bc5aaef.tgz
Unzip .tgz using winrar and the zip will be extracted in folder named as vince_global_images_V9.5.12.0.NEGMIFA_20180525.0000.00_7 inside this folder there will be another folder named same.
Open Mi Flash tool and click to select direct to folder vince_global_images_V9.5.12.0.NEGMIFA_20180525.0000.00_7 open the folder and then open the other folder click Ok (don't open the the images folder)
Connect your redmi 5 plus in fast boot mode and click refresh, then choose clean all and click Flash