Related
Hey guys,
I'm still running the stock EUI ROM and getting pretty sick of it.
I've looked at getting my bootloader unlocked and installing TWRP but it seems pretty complicated for this device and what information I could find didn't work for me.
Can anyone show me some noob friendly guides on getting this done?
Much appreciated!
What?!? I never had a phone which bootloader unlocks easier than in Le Max 2. You have a special switch for that i developer options. That's all. Next you have to restart your phone in bootloader mode and flash desired recovery using fastboot commands.
Qron said:
What?!? I never had a phone which bootloader unlocks easier than in Le Max 2. You have a special switch for that i developer options. That's all. Next you have to restart your phone in bootloader mode and flash desired recovery using fastboot commands.
Click to expand...
Click to collapse
Wow, I didn't know that's how you unlock the bootloader. Sorry like I said I'm not very familiar with this device yet. Thanks!
As far as using fastbood commands I tried that but the drivers didn't seem to work on my PC. I couldn't get any of that to work. But I'll keep trying.
If you have anything like Samsung Kies or HTC Sync, etc. installed on your PC, you might try to remove it and reinstall drivers using "15 seconds ADB installed".
i just posted this yesterday,. i guess i could have chosen a better title... do you have any suggestions?? (maybe "full guide: adb, fastboot, twrp recovery, backup, flashing"?????)
http://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
@thielek what windows do you have? I can suggest something if you have win7, for win10 you can find a guide in some other threads.
Qron said:
If you have anything like Samsung Kies or HTC Sync, etc. installed on your PC, you might try to remove it and reinstall drivers using "15 seconds ADB installed".
Click to expand...
Click to collapse
I had a Nexus 5 I was using on this PC I'll try removing all those drivers. Thanks.
valy_cta said:
@thielek what windows do you have? I can suggest something if you have win7, for win10 you can find a guide in some other threads.
Click to expand...
Click to collapse
Windows 10 here. Does that make it more difficult?
greenManGaming said:
i just posted this yesterday,. i guess i could have chosen a better title... do you have any suggestions?? (maybe "full guide: adb, fastboot, twrp recovery, backup, flashing"?????)
http://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
Click to expand...
Click to collapse
Hey, this looks really good!
Thanks I will definitely give it a read and try to get this sorted. I'm pumped to get that CM 14.1 ROM when it gets a few more of the bugs sorted.
thielek said:
Windows 10 here. Does that make it more difficult?
Click to expand...
Click to collapse
No, actually you need to disable the signature verification if I recall it right. I can't find the thread for win10 driver installation right now but for sure I have seen it on xda for LeMax2
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Emokah said:
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Click to expand...
Click to collapse
Wow! That fastboot program was amazingly simple. Thank you! How did I know find this before. The other guides are very long.
So that installed cuoco92's ROM as well as TWRP. Do you suggest using his ROM? That second link you provided in the next paragraph didn't work.
I was looking for a very clean and vanilla android like ROM. I hate EUI and am excited for that CM 14.1 build but it's not ready yet.
Thanks again very much!
thielek said:
Wow! That fastboot program was amazingly simple. Thank you! How did I know find this before. The other guides are very long.
So that installed cuoco92's ROM as well as TWRP. Do you suggest using his ROM? That second link you provided in the next paragraph didn't work.
I was looking for a very clean and vanilla android like ROM. I hate EUI and am excited for that CM 14.1 build but it's not ready yet.
Thanks again very much!
Click to expand...
Click to collapse
Maybe Madsurfer's 21s will be good for you. It's without chinese apps etc.
Emokah said:
Maybe Madsurfer's 21s will be good for you. It's without chinese apps etc.
Click to expand...
Click to collapse
Cool I'll check that out.
Any idea what the best CM ROM is right now?
If I backup after Ive flashed twrp & want to restore on Mokee rom?Im on stock eui 19s & also Can I flash rom placed on internal storage?Coz it's showing storage as encrypted
Emokah said:
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Click to expand...
Click to collapse
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
manishsoni7689 said:
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
Click to expand...
Click to collapse
This 5 steps:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
unlocks you Bootloader, installs TWRP and installs Cuoco92 with root and everything included.
You can install new ROM like 21s and just flash SuperSu zip to get it.
manishsoni7689 said:
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
Click to expand...
Click to collapse
Hello I've successfully flashed mokee from,But Jio is not working only data is working.Cannot make or receive calls,Any solutions?
RISHI RAJ said:
Hello I've successfully flashed mokee from,But Jio is not working only data is working.Cannot make or receive calls,Any solutions?
Click to expand...
Click to collapse
Buddy, I am still finding proper steps to flash twrp, so I can't guide you on custom roms.
Can you please give the steps those you followed in order to install twrp. Thanks
manishsoni7689 said:
Buddy, I am still finding proper steps to flash twrp, so I can't guide you on custom roms.
Can you please give the steps those you followed in order to install twrp. Thanks
Click to expand...
Click to collapse
check 3 posts up
Unlocking Bootloader1. Make sure you have a sim and active mobile data. Then go to about phone tap build number 7-8 times. After that go to advanced settings > developer options > turn on OEM unlocking and then check if this device is secure and click add account and device.
2. Download Mi unlock tool from here. Extract it and paste it in C:/unlock. or else your device won't be recognized for unlocking.
3. Open Mi unlock tool and then enter the Mi account which was on your device. Put your device in fastboot mode by pressing vol- and power and then connect to PC. Press unlock and if it tells you to wait you have no other option but to wait. If your mi flash tool shows connect your device even after you have connected it. Follow this guide here.
4. After you have unlocked your bootloader reboot your phone.
Flashing TWRP and Rooting via magisk
1. Download this TWRP image here. Thanks to the original developer mauronofrio.
2. Download adb and fastboot tools here and install it.
3. Now put your phone in fastboot mode and connect it with your pc. Now where you have downloaded the TWRP file rename it to TWRP.img and open a CMD window there if you don't know how just google.
4. Type the following commands
1. fastboot devices
2. fastboot flash recovery TWRP.img
3. fastboot reboot recovery.
Click to expand...
Click to collapse
5. Your phone will boot into TWRP now. But TWRP will be overwritten by stock miui recovery to stop that you need to flash Magisk. Download this zip move it to internal storage then flash by tapping on install and swipe to flash. Reboot your device. Reboot to recovery again to check if TWRP is present.
Now your device is rooted
OR
Flash latest OrangeFox Recovery if you don't want magisk.
Flashing A rom
1. Download.
2. Flash.
3 Format Data.
Done
Feel free to ask any questions. And don't point a finger at me for messing your device.
My mi unlock tool says can't get info. I using Indian version miui 12
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
igeekyayush said:
My mi unlock tool says can't get info. I using Indian version miui 12
Click to expand...
Click to collapse
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Doombuggie85 said:
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
Click to expand...
Click to collapse
Yes, it does.
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
LoadOP2 said:
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Click to expand...
Click to collapse
igeekyayush said:
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
Click to expand...
Click to collapse
Okay keep the sim inserted and use the device for 7 days. And if it doesn't work try using older version of unlock tool.
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
I've unlocked the bootloader using the unlock tool and waited for 7 days,
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Skip the flashing a rom part and you will be good to go.
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
Click to expand...
Click to collapse
You can flash twrp and then check if it persists. If not flash magisk again their is no thing as magisk colliding lol. Just make sure you flash a newer version. And if nothing works flash stock rom and then twrp.
If you have the stock boot IMG flash it and then intsall twrp and magisk.
smsry said:
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
Click to expand...
Click to collapse
LoadOP2 said:
Skip the flashing a rom part and you will be good to go.
Click to expand...
Click to collapse
Haha, makes sense! Thank you for your answers
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
smsry said:
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
Click to expand...
Click to collapse
Yes, If you use a lock screen enter that password it will be decrypted. You will have to format data if you decide to flash any other rom anyway.
flashed twrp but not able to boot into recovery.
igeekyayush said:
flashed twrp but not able to boot into recovery.
Click to expand...
Click to collapse
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Sir ive used xiaomi flashtool v2 after that and it worked. Thanks sir. After that i updated to latest twrp from that chinese one.
LoadOP2 said:
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Click to expand...
Click to collapse
Joyeuse
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
rfguy said:
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
Click to expand...
Click to collapse
Yes Unified means all Snapdragon 720g Devices which include Joyeuse, Curtana, Gram, Excalibur.
Hey buddy, thank you for this quick step-by-step guide. I flash ROMs since 2012 and you know what? It helped me the same. Having all stuff needed for go from stock to custom concentrated in one place (plus some useful tip like the Magisk flash at the end) it's always useful and time-saving. Thank you
2 Micro-notes about fastboot btw:
- write 'fastboot (with lowered 'f'): it may confuse some newbie
- it's 'reboot' instead of 'boot'
This might help you after realizing that you want to install custom ROM again after upgrading to android 11 MIUI but you cannot install android 10 or 11 based ROM and stuck with either boot loop or android rescue party.
WARNING: This might wipe every writable partition. Charge your phone at least 20% or more to prevent from destroying these partitions.
Instructions:
1. Download firmware from here
2. Download full ROM (either recovery or fastboot) from here
3. Save the firmware zip file it in either internal storage or sdcard. Reboot to TWRP afterwards
4. Tap install and find the zip file in your storage and install. Wait for a couple of seconds to get done.
To install full ROM
Recovery
1. After installing firmware from recovery mode, don't reboot. If you reboot the system it will fail to boot. Boot to fastboot if you fail this step and flash a recovery image. Proceed with next step.
2. Install full ROM flashable zip from sdcard or internal storage.
3. Format /data. Reboot.
Using fastboot
1. Boot from fastboot mode
2. Extract full ROM fastboot zip file.
3. Open miflash and locate the fastboot folder.
4. Choose flash_all. Click start.
5. The phone reboots itself. Boot to recovery mode and wipe data.
All done. The phone is now downgraded from android 11 back to android 10.
Note: I got 2 anti triggered when attempting to downgrade the phone using recovery and fastboot without installing firmware zip file first. RIP me I guess I voided my warranty anyways so doesnt matter as I already applied some insurance for my device.
TL;DR: Installed Recovery will get erased as I mentioned in WARNING. Please don't skip every step.
Edit: since it made confusion, I split steps for recovery and fastboot mode.
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
PYCON said:
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
Click to expand...
Click to collapse
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Steelrock said:
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Click to expand...
Click to collapse
Ok, ok, good to know. I'm just curious... I'll remain with A10 till when A11 will be good enough to be used as a daily driver
Hi. Does this method requires unlocked bootloader? Thanks
hi. this method not working for me !
*phone is unlocked !
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Alin45 said:
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Click to expand...
Click to collapse
reboot with bootloop and again. and just miui 12 a11 or rom with selinux permissive working for flash.
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
did you try to flash firmware file from twrp recovery first? also that error means that a checkpoint failed which you need to disable or remove in configuration settings.
tourofeio said:
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
Click to expand...
Click to collapse
did you tried recovery or fastboot flashing? and did you installed firmware first before installing full rom?
endva3 said:
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
Click to expand...
Click to collapse
i only tried recovery method and it works fine after days of trying. 12.0.6 android 11 is still buggy and miui needs to fix it a lot. most of apps are not well optimized for this flavor.
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Steelrock said:
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Click to expand...
Click to collapse
i did the same, but looking to partitions of system, product and vendor, i understand that flashing the files via recovery and fastboot they dont write in that partitions.
looks like the partitions are read only. thanks
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
tourofeio said:
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
Click to expand...
Click to collapse
Most probable, u forgot to do a Format data (yes) before reboot to system.
endva3 said:
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
Click to expand...
Click to collapse
Did you flash it from the built-in recovery or with MiFlash? (My 167 hour waiting period ends tomorrow)
Solved people. change the version of the Mi Flash.
I want to access /data/system/users//settings_ssaid.xml to know what my game unique id is.
But after some research i learned that i have to root to able to get there but i have almost zero knowledge about it.
Are there any guide to root Redmi Note 10 from the scratch? Thanks.
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
alonsoj636 said:
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
Click to expand...
Click to collapse
Hi, I'm on official global ROM 12.5.3.0 RKGMIXM
And i turned on OEM Unlocking in developer mode yesterday (Which is confuse me a little a guide said i have to wait for 7 days for this but mine is nothing it's just switched to on)
OEM Unlocking is only one of the steps, but it does not unlock the bootloader. File a request with Xiaomi.
unlock bootloader
i recommend only booting to twrp, not flashing it
flash magisk 23
hide magisk
inn0ichi said:
...
i recommend only booting to twrp, not flashing it
...
Click to expand...
Click to collapse
Why do you recommend to only booting to TWRP instead of flashing it?
Pasarireng said:
Why do you recommend to only booting to TWRP instead of flashing it?
Click to expand...
Click to collapse
because the twrp developer instruction is to booting , not flashing
alonsoj636 said:
because the twrp developer instruction is to booting , not flashing
Click to expand...
Click to collapse
Aside of that instruction, actually is it 'dangerous' if we install the TWRP? What 'bad things' would/may happen if we install it? (Because I see some guides about installing it on RN10, like this one for example, and I was almost followed that guide).
Risk of bootloop
Pasarireng said:
Aside of that instruction, actually is it 'dangerous' if we install the TWRP? What 'bad things' would/may happen if we install it? (Because I see some guides about installing it on RN10, like this one for example, and I was almost followed that guide).
Click to expand...
Click to collapse
Risk of bootloop and fastboot loop... because this twrp is modded to be booted and then flashed (you can found the option in advanced)
One time i faced a fastboot loop once i flashed directly the twrp , that's why i recommend booting it first and then , flashing
Y
alonsoj636 said:
Risk of bootloop
Risk of bootloop and fastboot loop... because this twrp is modded to be booted and then flashed (you can found the option in advanced)
One time i faced a fastboot loop once i flashed directly the twrp , that's why i recommend booting it first and then , flashing
Click to expand...
Click to collapse
Yes, I mean that, (booting it first then flashing,.. (the TWRP right?).. I think the guide (which the youtube link I attached above) is also told to do that, right? (Or do I misunderstand this?)
Pasarireng said:
Y
Yes, I mean that, (booting it first then flashing,.. (the TWRP right?).. I think the guide (which the youtube link I attached above) is also told to do that, right? (Or do I misunderstand this?)
Click to expand...
Click to collapse
Yes , is the correct way
inn0ichi said:
unlock bootloader
i recommend only booting to twrp, not flashing it
flash magisk 23
hide magisk
Click to expand...
Click to collapse
Please confirm these;
*So we can:
Use TWRP only temporarily, only to root the phone (by flashing Magisk v23),
and then,
back to using the stock recovery on our RN10 afterward,
even if the RN10 is already rooted?
**If the answer for my question above is yes, then (in RN10 condition of Unlocked Boot Loader, Rooted, Stock MIUI & Stock Recovery) ;
Would we still get official OTA Update from Xiaomi (and can download and install the update- as how it's like before rooting the phone)?
Thank you in advance
It's an unnecessarily complicated procedure. Just flash a modified boot.img for your Miui using fastboot from your PC. If you don't have the ability to modify the boot.img on another rooted phone yourself, request a modified boot.img with the exact update version of your Miui here.
StaryMuz said:
It's an unnecessarily complicated procedure. Just flash a modified boot.img for your Miui using fastboot from your PC. If you don't have the ability to modify the boot.img on another rooted phone yourself, request a modified boot.img with the exact update version of your Miui here.
Click to expand...
Click to collapse
Thanks again, (and maybe I will try your suggestion later).. but (sorry)... your reply doesn't answer my questions.
(I think my questions are very clear and probably very easy to be answered by someone who has experience/knowledge about it (like you?).. no?)
Forgive my nooby questions.
But I really want to know as much as I can (especially about the answer for some questions I have inside my head about the matter, like I asked above),.. before executing doing something about my phone.
oops... I'm sorry for double send
In the past I rooted Miui and then continued to get OTA updates. However, this cannot be confirmed for all versions of Miui. Each new update changes the phone software and so what worked before may not work today.
alonsoj636 said:
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
Click to expand...
Click to collapse
Hi, I'm unlocked my phone and installed the orange fox it's the custom recovery right? Because it say so.
If yes, By Flash Magisk ZIP how to do that? Please explain the detailed steps, Thanks.
First of all, I would like to point out that Magisk (root) is a security risk. Without understanding the issues, the phone is more easily exploitable.
To install, just download the magisk file with the ZIP extension. In recovery, select the install option and select this file. Once installed, exit recovery and boot the system. Once the system boots, use magisk and complete the installation it requests.
Lolitary said:
Hi, I'm unlocked my phone and installed the orange fox it's the custom recovery right? Because it say so.
If yes, By Flash Magisk ZIP how to do that? Please explain the detailed steps, Thanks.
Click to expand...
Click to collapse
the answer above is right ... but i would suggest to flash Orange Fox zip and then Magisk zip... to avoid problems
isn't there decrypt.zip for RN10?
How to decrypt this phone?
I usually did that along with rooting with my android phones before this.
Edit:
Update:
It's ok now I understand how, after watching this video.
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
devil1 said:
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
Click to expand...
Click to collapse
It's not possible to switch from stock ROM to custom without doing clean install. You will have to root again.
First update to latest Official Stock ROM, then take backup of your files to your PC or to SDCard (if you have one) , flash to latest Official TWRP and check my POCO F1 Ultimate Collection & Guides. You can find everything there. I have awarded recommended ROMs in my collection.
Feel free to ask if you have any question regarding the guides.
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
devil1 said:
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
Click to expand...
Click to collapse
First you need to take backup of your files to PC or External SDCard.
Then you should update to latest version of MIUI via OTA if it's possible or via TWRP (you can use the stock recovery rom to do it via twrp). (You can also use my guides for clean install stock rom)
Then you should unlock your bootloader if it's not already unlocked.
Then flash latest Official TWRP.
Then flash latest firmware (not vendor) just to make sure you are on the latest. (You should be on latest firmware after updating to the latest MIUI version)
Then Wipe everything + format data according to my guides and flash the ROM you want. If you choose A12 Pixel Experience or crDroid keep in mind that these ROMs use their own recovery because these are encrypted by default ROMs and TWRP can't handle the decryption of A12 encrypted ROMs yet. So to make OTA updates and that stuff work correctly devs of these ROMs decide to use their own recovery which can handle the decryption of encrypted roms and as result to make OTA update work fine. Check the installation instructions of these roms in their threads. (Afterwards you can use adb sideload to flash stuff using these recoveries)
After that, flash Magisk since you want root.
Then you can restore titanium backup if you want.
OK i follow your instruction.Thanks
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
i have find this video.This is not the good phone but i think that the installation is the same:
devil1 said:
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
Click to expand...
Click to collapse
Yes use Fastboot Method to flash TWRP. No problem with encryption.
After that follow my clean install custom rom guide to flash the ROM you want. Also please check the instructions in the threads of ROMs you want to flash. A12 crDroid and PE use their own recoveries.
Basically tell me which ROM you want to flash to help you exactly with steps.
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
devil1 said:
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
Click to expand...
Click to collapse
Send a screenshot what you type in cmd and where you have the twrp.img
Or you mean you can't find it in your device while you are booted on TWRP?
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
devil1 said:
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
Click to expand...
Click to collapse
Are you sure you select Install Image?
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
devil1 said:
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
View attachment 5549731
Click to expand...
Click to collapse
I have all the steps on my guide. Please read it carefully. It boots back to mi recovery because you haven't flash TWRP yet just booted into. After boot into TWRP u need to flash twrp in recovery section so it will stay after reboot.
Please read the steps.
Download portable Minimal ADB and Fastboot and latest Official TWRP recovery.
Open cmd from minimal adb and fastboot and write:
fastboot boot and the path you have TWRP.
Example:
Code:
fastboot boot C:\Users\Retrial\Desktop\twrp-3.6.0_9-0-beryllium.img
Then proceed with the rest steps in my guide. Connect ur device to pc while u are booted into TWRP and copy TWRP.img to your device. Then in TWRP press Install Image and select the twrp.img u just copied into ur device. Select recovery and done.
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
devil1 said:
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
Click to expand...
Click to collapse
Hmm strange, probably of MIUI. Anyway since you are going to flash custom rom, when u flash twrp in recovery go back and select wipe and wipe everything (read my clean install guide), go back press format data type yes, and then reboot to TWRP.
EDIT: I just saw u rebooted to system. That's not what we want. Press reboot to recovery.
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
devil1 said:
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
Click to expand...
Click to collapse
The TWRP flashed correctly. You overlap it again by pressing reboot to recovery from MIUI updater.
Don't do that...do the combination to boot to TWRP after flashing it. Power+Volume Up.
And continue with clean install steps in my guide to flash custom rom.
In my guide I write nowhere to boot to MIUI and press from MIUI Updater reboot to recovery, please stick to my guide and you will be fine.
Poco f1 update not