:D TURN YOUR PHONE INTO DESKTOP :good:(Without Pc and Internet)., - YU Yureka Themes and Apps

hlo friends i am back again , after a long time with a new topic. This is about turn ur phone into a desktop without root pc or internet.
So follow the video to and follow the steps
-
-
[[[ https://youtu.be/bbTzUsd4Nc4 ]]]
-
-

Related

[Q] Please help - half bricked mini pro

Hello!
I hope there is someone who can help. I have purchased a second hand mini pro with custom firmware (some froyodroid). It worked for a couple of days and now it just doesnt start up anymore. When i turn it on it boots into the home screen and comes then up with dozens of error messages ie. phone was closed..., calender was closed,.... so i cant even go into the settings.
My idea was to install some other rom and hope the problem is solved but when i run flashtool i get this message
19/053/2012 01:53:15 - INFO - Selected U20_nAa-11_2.6.29.6-nAa-11.ftf
19/053/2012 01:53:15 - INFO - Preparing files for flashing
19/053/2012 01:53:15 - INFO - Please connect your device into flashmode.
19/053/2012 01:53:37 - INFO - Device connected with USB debugging off
19/053/2012 01:53:37 - INFO - For 2011 devices line, be sure you are not in MTP mode
19/054/2012 01:54:27 - INFO - Device disconnected
19/054/2012 01:54:41 - INFO - Device connected with USB debugging off
19/054/2012 01:54:41 - INFO - For 2011 devices line, be sure you are not in MTP mode
I assume it wants me to turn on USB debugging but unfortunately i cant even get into the settings. Any idea what to try to fix it?
TIA
Sorry guys, after reading some more threads i realized how to solve it. Thanks anyway
TO dosada or others who know: How to solve it?
THanks in advance!
i use flashtool before and the first time,i also dont know how to use it. but after more trials, i manage to understand on how to use flashtool (after reading thread by thread).
1. turn off the phone, unplug the cable.
2. open flashtool, selec flashmode, select kernel, then ok.
3. flashtool will give you a message about flashmode.
3. hold back button (<== arrow) and plug in the cable.
4. the flash process start.

MFT wont connect to K900

Hi,
anybody had an issue when MFT wont recognize K900?
I have:
- installed drivers
- loaded ROM into MFT
- turned off K900
- connected it
[nothing happened]
- pressed power ON for 1 second
[still nothing]
Any ideas?
trillian55 said:
Hi,
anybody had an issue when MFT wont recognize K900?
I have:
- installed drivers
- loaded ROM into MFT
- turned off K900
- connected it
[nothing happened]
- pressed power ON for 1 second
[still nothing]
Any ideas?
Click to expand...
Click to collapse
Your phone is ON and disconnect to PC.
-install drivers to PC
- install MFT to PC ( I donĀ“t know if works with Windows 8, for me works- Win7 64Bit)
- download ROM for MFT
-turn on MFT
-file- settings- change PID to 09EE, check Override and change Logger level to DEBUG- Apply- OK
-file-open- choose *.xml file from folder with ROM for MFT
- turn off phone (press & hold POWER button minimally 10 seconds.)
-connect phone to PC via USB cable
- MFT run, wait cca 5 min to finish
guide from youtube (with download links-drivers, MFT, ROM)
https://www.youtube.com/watch?v=BhvA_T694kw

Install stock failed

Hello!
I have problem when try to get back to stock after installed GPe ROM...
Flashtool vagy Pc Companion doesnt work anybody could help me how to solve?
Have you tried rebooting your computer?
This usually fixes it for me when I have had that issue.
pTeronaut said:
Have you tried rebooting your computer?
This usually fixes it for me when I have had that issue.
Click to expand...
Click to collapse
Lot of time
yupiter00 said:
Hello!
I have problem when try to get back to stock after installed GPe ROM...
Flashtool vagy Pc Companion doesnt work anybody could help me how to solve?
Click to expand...
Click to collapse
First of all, this should be posted in the FAQ section, not here. To help you fix this can you please answer these questions?
1- What do you mean by Flashtool and PC companion "does not work"? What error messages do you get from each?
2- How do you use Flashtool? In Falsh mode or fastboot mode?
3- What is the version of your flashtool?
najoor said:
First of all, this should be posted in the FAQ section, not here. To help you fix this can you please answer these questions?
1- What do you mean by Flashtool and PC companion "does not work"? What error messages do you get from each?
2- How do you use Flashtool? In Falsh mode or fastboot mode?
3- What is the version of your flashtool?
Click to expand...
Click to collapse
Of course
1.Flashtool Said will be need usb debugging and uknown sources ,Sony Sompanion doesnt start repairing because modified ROM...
2.In Flashmode try in fastboot mode probadly doesnt answering...
3.0.9.18 the newest...
But the biggest problem when try the charge still rebooting because that bootlop
yupiter00 said:
Of course
1.Flashtool Said will be need usb debugging and uknown sources ,Sony Sompanion doesnt start repairing because modified ROM...
2.In Flashmode try in fastboot mode probadly doesnt answering...
3.0.9.18 the newest...
But the biggest problem when try the charge still rebooting because that bootlop
Click to expand...
Click to collapse
Please copy and paste your Flashtool log here, or attach it as a file.
OR:
Follow this instruction VERY CAREFULLY.
1- Disconnect your phone from the computer and turn it off completely.
2- Find and download an FTF that is specifically for your device. For example if your device is a C6833 find an FTF specifically for that model. You can find a ton of these FTFs in the general forum.
3- Make sure your Flashtool version is exactly 0.9.18.6. If not, uninstall it and install 0.9.18.6.
4- Run Flashtool and click on the icon that looks like a spark (flash device). Choose flash mode.
5- Navigate to the directory where the FTF is and select the directory.
6- You should see the contents of the FTF appear in the dialog window. Under "Wipe" select all of them (APPSLOG, DATA, and CACHE).
7- Click on flash and let the program do its work. Wait until it prompts you to connect the phone.
8- When prompted, hold the volume down key and then connect the phone to the USB port of the computer. Keep holding the key down until you see the flash starting. Wait until it completes.
If you get an error in any step, CLEARLY describe what fails AND include the error message by posting the log or a snapshot of your screen. If you just say "it didn't work" I won't be able to help.
Tried this very carefully but get this error!
najoor said:
Please copy and paste your Flashtool log here, or attach it as a file.
OR:
Follow this instruction VERY CAREFULLY.
1- Disconnect your phone from the computer and turn it off completely.
2- Find and download an FTF that is specifically for your device. For example if your device is a C6833 find an FTF specifically for that model. You can find a ton of these FTFs in the general forum.
3- Make sure your Flashtool version is exactly 0.9.18.6. If not, uninstall it and install 0.9.18.6.
4- Run Flashtool and click on the icon that looks like a spark (flash device). Choose flash mode.
5- Navigate to the directory where the FTF is and select the directory.
6- You should see the contents of the FTF appear in the dialog window. Under "Wipe" select all of them (APPSLOG, DATA, and CACHE).
7- Click on flash and let the program do its work. Wait until it prompts you to connect the phone.
8- When prompted, hold the volume down key and then connect the phone to the USB port of the computer. Keep holding the key down until you see the flash starting. Wait until it completes.
If you get an error in any step, CLEARLY describe what fails AND include the error message by posting the log or a snapshot of your screen. If you just say "it didn't work" I won't be able to help.
Click to expand...
Click to collapse
http://i62.tinypic.com/oqeu0m.png
Thanks for trying help
You are not using the version of flashtool that najoor told you to use.
DOWNLOAD VERSION 9.18.6, the latest version is causing that error.
pTeronaut said:
You are not using the version of flashtool that najoor told you to use.
DOWNLOAD VERSION 9.18.6, the latest version is causing that error.
Click to expand...
Click to collapse
That i use which version?
yupiter00 said:
That i use which version?
Click to expand...
Click to collapse
Ok:
1- Read post #6 carefully
2- Apply it.
3- If it doesn't work, read post #6 carefully again.
4- Repeat until it works.
najoor said:
Ok:
1- Read post #6 carefully
2- Apply it.
3- If it doesn't work, read post #6 carefully again.
4- Repeat until it works.
Click to expand...
Click to collapse
Ok and how fix always rebooting which kill the battery? I cant flash with this problem...Cannot charge
yupiter00 said:
Ok and how fix always rebooting which kill the battery? I cant flash with this problem...Cannot charge
Click to expand...
Click to collapse
And cannot get switch off with red button ad with vol + power off ...
When battery had enough power switch it immediatly and still rebooting that canoot charge....
najoor said:
Please copy and paste your Flashtool log here, or attach it as a file.
OR:
Follow this instruction VERY CAREFULLY.
1- Disconnect your phone from the computer and turn it off completely.
2- Find and download an FTF that is specifically for your device. For example if your device is a C6833 find an FTF specifically for that model. You can find a ton of these FTFs in the general forum.
3- Make sure your Flashtool version is exactly 0.9.18.6. If not, uninstall it and install 0.9.18.6.
4- Run Flashtool and click on the icon that looks like a spark (flash device). Choose flash mode.
5- Navigate to the directory where the FTF is and select the directory.
6- You should see the contents of the FTF appear in the dialog window. Under "Wipe" select all of them (APPSLOG, DATA, and CACHE).
7- Click on flash and let the program do its work. Wait until it prompts you to connect the phone.
8- When prompted, hold the volume down key and then connect the phone to the USB port of the computer. Keep holding the key down until you see the flash starting. Wait until it completes.
If you get an error in any step, CLEARLY describe what fails AND include the error message by posting the log or a snapshot of your screen. If you just say "it didn't work" I won't be able to help.
Click to expand...
Click to collapse
Hi again!
Problem now are in 7 step with flash because battery when enough power still get off ...That how to flash?
yupiter00 said:
Hi again!
Problem now are in 7 step with flash because battery when enough power still get off ...That how to flash?
Click to expand...
Click to collapse
If the phone not have enough battery do the following:
1- Makes sure it is turned off. To do so you can hold the power and volume up buttons simultaneously for a few seconds and then you will feel a vibration and then the phone will turn off.
2- leave the phone connected to a charger for about 10 hours.
If that doesn't charge the phone you will have to take it to a Sony repir center.
najoor said:
If the phone not have enough battery do the following:
1- Makes sure it is turned off. To do so you can hold the power and volume up buttons simultaneously for a few seconds and then you will feel a vibration and then the phone will turn off.
2- leave the phone connected to a charger for about 10 hours.
If that doesn't charge the phone you will have to take it to a Sony repir center.
Click to expand...
Click to collapse
04/027/2015 18:27:34 - INFO - Flashtool Version 0.9.18.6 built on 30-05-2015 22:30:00
04/027/2015 18:27:34 - INFO - Executing search strategies to find proxy selector
04/027/2015 18:27:34 - INFO - No proxy found for IE. Trying next one
04/027/2015 18:27:34 - INFO - No proxy found for firefox. Trying next one
04/027/2015 18:27:34 - INFO - No proxy found for java. Trying next one
04/027/2015 18:27:35 - INFO - Syncing devices from github
04/027/2015 18:27:39 - INFO - Scanning devices folder for changes.
04/027/2015 18:27:57 - INFO - Pulling changes from github.
04/027/2015 18:27:58 - INFO - Devices sync finished.
04/028/2015 18:28:02 - INFO - Selected Bundle for Sony Xperia Z Ultra (C6833). FW release : 14.5.A.0.270. Customization : Customized CE4
04/028/2015 18:28:02 - INFO - Preparing files for flashing
04/028/2015 18:28:03 - INFO - Device disconnected
04/030/2015 18:30:59 - INFO - Please connect your device into flashmode.
04/036/2015 18:36:35 - INFO - Device connected with USB debugging off
04/036/2015 18:36:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/036/2015 18:36:39 - INFO - Device disconnected
04/041/2015 18:41:28 - INFO - Device connected with USB debugging off
04/041/2015 18:41:28 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/041/2015 18:41:34 - INFO - Device disconnected
04/009/2015 19:09:27 - INFO - Device connected with USB debugging off
04/009/2015 19:09:27 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/009/2015 19:09:54 - INFO - Device disconnected
04/010/2015 19:10:32 - INFO - Flash canceled
04/011/2015 19:11:00 - INFO - Selected Bundle for Sony Xperia Z Ultra (C6833). FW release : 14.4.A.0.108. Customization : 1275-9426
04/011/2015 19:11:00 - INFO - Preparing files for flashing
04/011/2015 19:11:56 - INFO - Please connect your device into flashmode.
04/018/2015 19:18:25 - INFO - Flash canceled
Flashtool logs...
najoor said:
If the phone not have enough battery do the following:
1- Makes sure it is turned off. To do so you can hold the power and volume up buttons simultaneously for a few seconds and then you will feel a vibration and then the phone will turn off.
2- leave the phone connected to a charger for about 10 hours.
If that doesn't charge the phone you will have to take it to a Sony repir center.
Click to expand...
Click to collapse
Thanks but little worrying about heating it will be doesn t porblem for 10 hours ?
najoor said:
If the phone not have enough battery do the following:
1- Makes sure it is turned off. To do so you can hold the power and volume up buttons simultaneously for a few seconds and then you will feel a vibration and then the phone will turn off.
2- leave the phone connected to a charger for about 10 hours.
If that doesn't charge the phone you will have to take it to a Sony repir center.
Click to expand...
Click to collapse
1 is working but only for few seconds after vibration will switch on
Probadly go to servis ,flashtool doesnt receiving flash mode only windows sound when touch it...
yupiter00 said:
Probadly go to servis ,flashtool doesnt receiving flash mode only windows sound when touch it...
Click to expand...
Click to collapse
I am sorry I'm trying to help you, but unfortunately I don't understand your sentence.
I looked at the log that you posted. it seems that when you connect your phone to the computer in step 8, the phone is not turned off.
Try turning the phone off again the way I told you. When you are turning it off if should not be connected to the computer or charger. Otherwise it turns right back on.
And don't worry about heating. After the phone is turned off you can connect it to the charger for many hours.
Don't try anything new. Just follow the instructions I gave you.
najoor said:
I am sorry I'm trying to help you, but unfortunately I don't understand your sentence.
I looked at the log that you posted. it seems that when you connect your phone to the computer in step 8, the phone is not turned off.
Try turning the phone off again the way I told you. When you are turning it off if should not be connected to the computer or charger. Otherwise it turns right back on.
And don't worry about heating. After the phone is turned off you can connect it to the charger for many hours.
Don't try anything new. Just follow the instructions I gave you.
Click to expand...
Click to collapse
Thanks man you are amazing It s done worked can i add to friend list?

:D TURN YOUR PHONE INTO DESKTOP :good:(Without Pc and Internet)

hlo friends i am back again , after a long time with a new topic. This is about turn ur phone into a desktop without root pc or internet.
So follow the video to and follow the steps
-
-
[[[ https://youtu.be/bbTzUsd4Nc4 ]]]
-
-

Samsung S6 - Broken Screen - Data

Hello guys,
I'm a bit sad, I broke my S6 screen today. It's not a big deal, already ordered a new phone. The really sad thing is the pictures / recorded call with my wife on this phone. I can't access to it throug PC because I can't click the "Ok" pop up when I connect it to the computer. He is not in USB Debug mode also. Is there a way to cast the phone on the PC screen without USB Debug ? Or can I force the USB Debug ? I'm a bit lost...
Thanks a lot,
Hi , can you see that pop UP on your Screen ? if yes , you can use OTG USB kable and connect your Mouse on your phone .
Hello Teddy, thank you for your help !
Unfortunatly, I can't see anything it's just black. I've read about plugging a mouse with an OTG USB cable, but in my case, I won't have any use because it's broken so hard that nothing just show on the screen, no matter what I do.
I've read some stuff accross this forum, and I've found few clues about what to do, like using ADB / Odin. But as far as I understand, my phone need to be in USB Debug mode in order to work with ADB. There is also a solution that comes with something nammed Vaysor that can help you cast your screen on your PC, but again, you also need to be in USB Debug mode, wich i'm not in.
So I'm still lost at this point.
Regards;
There is also another way with flashing ADB enable file on Odin . So my question is what is your model of your phone ?
Hey Teddy ! Thanks for the help again.
My phone is a Galaxy S6 from Samsung.
Do you need the exact model or it is enough ? Is the exact model is needed, tell me I'm gonna have to search on the basement for the user's manual
Yes , You have Model : on the bottom of rear glass example SM-G920F , or G920T , G920A ,G928P .
Damn Teddy, you are right ! I've never noticed this before !
It's the SM G920F
Thanks again for your concern.
Unfortunatly this ADB method will probably not save your data , but you can flash custom recovery by odin which has already adb enabled .
Requirement
1. PC with internet connection
2. Odin
https://odindownload.com/download/Odin3_v3.12.3.zip
3.Custom recovery
https://dl.twrp.me/zeroflte/twrp-3.2.1-0-zeroflte.img.tar
Once you finish downloading those files , open Odin , click on AP choose twrp-3.2.1-0-zeroflte.img.tar put your phone in download mode by Holding together Vol- ,Home button and the Power button at the same time for about 7 second .
Once you feel is booting , release power button but keep holding Vol - and home few second , and then one time press Vol +.
Now connect your phone on pc and wait for Com port to be recognised on ODIN it will be green color , once you see that click on Start and wait to finish flashing new recovery.img .
Good Luck
Hello Teddy !
So, my date are going to be lost this way ? I can skip the pictures, but the recorded conversations with my wife are the most important for me. It reminds me the "good old time", before she start screaming at me because I forgot to take out the trash... I've hearded of Vysor, Where you can cast your phone on your PC. But to make Vysor work, you need both ADB and your phone on USB Debug. So, is there a way to put the phone on USB Debug with Odin / ADB or anything ?
Thanks for you help again.

Categories

Resources