[Themed] Purple TWRP-3.0.2-7 recovery K3 Note - K3 Note Android Development

The Latest TWRP recovery Version 3.0.2-7
Added:
Font change to cursiva
themed Purple
loading glows while flashing img or zip
Updated Super su Files
How to install:
Code:
[COLOR="Purple"]reboot to recovery[/FONT][/SIZE][/CENTER][/FONT][/SIZE][/CENTER]
[SIZE=5][FONT=Palatino Linotype][CENTER][SIZE=5][FONT=Palatino Linotype]
[CENTER]install
select img instead of zip
select the recovery.img and select type to recovery
and swipe to flash
reboot to recovery [/COLOR]
​
Download Link:
recovery.img
bit.ly
If u want to install from PC Download Autoinstaller :
Autoinstaller TWRP Themed recovery-twrp-3.0.2-7 V1.1.7z
bit.ly
Changelog:
v1.0
Initial Release
v1.1
fixed some loading its now better
Credits:
@andreya108 for twrp
@Ydriod me for theming heavily

Pls update the link

rhoben said:
Pls update the link
Click to expand...
Click to collapse
Bump. Any chance to get updated links?

Related

[ROM]★[TF201 LP 5.1.1][ZOMBi-POP OMNI KANG RC1][JULY 28]★

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE HAIRYBEAN 2.31 JB 4.2.1 BOOTLOADER VERSION 10.6.1.27.1 AND TWRP 2.8.0.0.+ OR CWM 6.5.0.0+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 15 mins to stabilise! The first boot will take 15 minutes!
Features and Tweaks
This ROM is based from OMNI AOSP sources
Supports EXT4 and F2FS Data partitions
Based off omni-5.1.1-20150508-zombi_tf300t-KANG source by lj50036/hardslog
Full Aroma Installer for main rom including choice of 4 kernels and ROM2SD/DATA2SD/F2FS support
Remixed _thatv11 kernel with OMNI ramdisk - repacked by sbdags
Grimlock kernel with OMNI ramdisk and _that init - by hardslog
DPI Size: 160 (TF300 recommended small fonts), 240 (Stock fonts), 224 (Medium fonts) & 200 (Small fonts), 180 (Tiny fonts) & 160 (Specsavers fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-POP, Android-L, Nexus Phase Beam
Gapps (updated by me to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
Tweaks: File system and performance optimised, Init.d support, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
Bug List
[*]No Floating windows yet
Change Log
20150728 ZOMBi-POP RC1 changes
- RELEASE CANDIDATE 1!
- Fixed the problem with ROM2SD and DATA2SD not working correctly on beta 4
- Added SuperUser and Secure Kernel as options to the installer (Turn these off for work wifi or watching sky go, etc)
- Added dock battery icon as an option to the installer under tweaks
- Fixed partitions not getting unmounted correctly for tuning during installation
- Fixed WiFi across the unified bases for TF700/TF300/TF201
- OmniSwitch now working - thanks hardslog
- Tidied up some installer messages
- Google play services updated to unified version for all devices
- Updated Google Maps to version 9.12.0
- Updated Google TTS to version 3.5.6
- Updated Google Calendar to version 5.2.2-98195638
- Updated YouTube to version 10.28.59
- Updated Apex Launcher to version 3.1.0
20150723 ZOMBi-POP Beta 4 changes
- Unified Aroma installer for TF700/TF300/TF201
- Rebased from omni-5.1.1-20150718-zombi_tf300t-KANG maintained by lj50036, hardslog, sbdags
- Merged source from omni-5.1.1-20150718-zombi_tf700t/tf201t-KANG maintained by lj50036, hardslog
- Updated all kernels and modules to the unified versions - thanks lj50036
- Added inverted kernel for TF201 users
- Aroma re-written to allow multi device selection and detection
- Additional tweaks added from TF701 Zombi-pop
- Amended SuperSU installer script to give correct permissions and install locations
- Reverted to latest Banks Gapps - means another wipe - sorry!
- Updated Google Calendar, Google Mail, Google Hangouts, YouTube, Google Search & Google Maps to latest versions
- Updated ESFile Explorer and Nova Launcher to latest versions
- Added flashable zip to enable dock battery - NOTE - this means you can't change the battery icon
20150119 ZOMBi-POP Beta 3 changes
- Rebased from omni-5.1.1-20150508-zombi_tf300t-KANG maintained by lj50036, hardslog
- Repacked Grimlock kernel for 5.1.1 (Grimlock lite is still using 5.0)
- Retweaked some File System and Virtual Memory parameters - focus on smoothness and battery
- Added Aroma code to remember previous selections as well as offer various installs
- sbdags best auto install, omni default auto install, previous options and previous auto install
- Viper4Android sound enhancer updated to lollipop version + updated the audio_effect.conf file
- Updated Google Play Store to version 5.5.8
- Updated Google Play Services to version 7.3.29
- Updated Google Search to version 4.5.13.19
- Updated Google Maps to version 9.8.1
- Updated Google Hangouts to version 3.2.91698097
- Updated Google Play Music to version 5.9.1854R
- Updated Google Calendar to version 5.2-91668080
- Updated ESFileExplorer to version 3.2.5.1
- Fixed swipe gestures on google keyboard
- Fix for Battery Drain on Google Play Services
- Removed Titanium Backup from the zip file
20150422 ZOMBi-POP 5.1 Beta 2 changes
- Rebased from omni-5.1.1-20150422-zombi_tf300t-KANG maintained by lj50036, hardslog
- New base is from OMNI 5.1.1 merged by lj50036
- Browser History is back again! Thanks lj50036 or Hardslog
- You can now choose to install, no GAPPS or minimal GAPPS (just playstore and syncs)
- Updated Google Maps to version 9.7.1
- Updated Google Search to version 4.4.11.16
- Updated Google Mail to verison 5.1.90765967
- Updated Google Calendar to version 5.2-90091543
- Updated Google Hangouts to version 3.1.89134953
- Updated Google Text-to-Speech to version 3.4.6.1819666
- Updated YouTube to version 10.14.56
- Updated ESFileExplorer to version 3.2.5
- Updated Android Terminal to version 1.0.70
- Updated Banks Gapps:
- Google Play Services 7.3.28 (1863718-438)
- Google Play Store 5.4.12
- fixed OC on Some TF201's running Grimlock-lite
20150119 ZOMBi-POP Beta 1 changes
- First public release
- Added Linrao Grimlocks kernel (needs more testing)
- Fixed auto-rotate (Thx hardslog)
- AOSP browser materialized (green)
20150119 ZOMBi-POP Alpah 4 changes
- New name - new logo! ZOMBi-POP
- Rethemed Aroma to new ZOMBi-POP theme
- Added 2 optional beta tweaks for testing (screen and kernel)
- Fixed _thatv11 kernel option
- Added Grimlock v5.0 (not tested)
20150118 Lollipop Alpha 3 changes
- Updated to latest OMNI Lollipop source omni-5.0.2-20150117-zombi_tf700t-KANG maintained by lj50036
- Fixed issue with AOSP Browser getting installed when not selected
- Fixed issue with Live Wallpapers getting installed when not selected
- Fixed issue with Launcher3 getting installed when not selected
- Fixed issue with Terminal not getting installed when selected
- Fixed issue with DSPManager still getting installed when Viper4fx is installed
- Removed stock calendar as google app one is far superior
- Fixed init.d scripts not running due to wrong permissions and wrong ramdisk init.rc call
20150117 Lollipop Alpha 2 changes
- Updated system and data apps to use new lollipop structures
- Updated all apps to latest versions
- Removed xposed as not compaitble with lollipop
- Tweaked the force gpu options
20150111 Lollipop Alpha 1 changes
- Updated to latest OMNI Lollipop source maintained by lj50036
- New PA GApps Lollipop version 2015
- Initial Beta test build to see what works and what doesn't
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk/ZOMBi-X ROMS)
@lj50036 - Source Guy (From CROMBi-kk/ZOMBI-X ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
Credits
Google
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : fatboyinlycra, berndblb, drewski_1, duckredbeard, keshavmot2, corb06, jmaybush, JoJoDaClown, kansasboy001, TrofeoSC
To Do
Fix loads of stuff!
XDA:DevDB Information
ZOMBi-POP, ROM for the Asus Eee Pad Transformer Prime
Contributors
lj50036, hardslog, sbdags, _that
Source Code: https://github.com/zombi-x-lp
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.1.x
ROM Firmware Required: JB Ending with 27.1 or 27.5 bootloader
Based On: OMNI AOSP
Version Information
Status: Stable
Current Stable Version: 20150728 RC1
Stable Release Date: 2015-07-28
Current Beta Version: 20150723 Beta 4
Beta Release Date: 2015-07-23
Created 2015-01-30
Last Updated 2015-07-27
Reserved
UPGRADE INSTRUCTIONS
Steps
1. Refer to the bottom of post #3 UPGRADE FROM STOCK BOOTLODER
2. If you haven’t yet, unlock your TF201 by following these instructions.
3. Install the latest version of Team Win Recovery Project (TWRP) 2.7+ or ClockWorkMod Recovery 6.0.5.0+ Note this ROM will NOT install with older versions of recovery!
TWRP HOME
Download the recovery file from above, put it into the same folder where you have adb and fastboot files. Please rename it to twrp.blob or cwm.img and follow the instructions below:
Code:
adb reboot bootloader
To flash the recovery:
Code:
fastboot -i 0x0B05 flash recovery cwm.img
or
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
A blue bar will go accross the screen on the tab and the command prompt will indicate it was successful in about 10 seconds
Then reboot the tablet either back to the bootloader or to android to complete
Code:
fastboot -i 0x0B05 reboot-bootloader
fastboot -i 0x0B05 reboot
You can now access the recovery by pushing [volume up] on the RCK icon in the bootloader screen
Click to expand...
Click to collapse
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
ZOMBi-POP ROM DOWNLOAD
Note: The first boot after install will take 15 mins whilst everything is built. Some people might think it is looping but it is not. The ROM also takes about 15 mins to stabilise after the first boot
ZOMBi-POP RC1 LP 5.1 Full Mirror 1
ZOMBi-POP RC1 LP 5.1 Full Mirror 2
MD5 Sum: e3980e1bffa539e676ac1269268abcd1
Flash this patch please as there is a file missing that gives better performance
RC1 Performance Patch
MD5 Sum: 4fbf9d5f934fa40a6e33ac409f703fcd
FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
ROM2SD/DATA2SD USERS PLEASE READ!
ROM2SD only works if you have ZOMBI-POP, ZOMBi-X, CROMBi-kk, CROMi-X or miniC flashed on internal with a THATv10+ kernel. Just choose ROM2SD in the installer of ZOMBi-POP to flash it to ROM2SD and the installer will do the rest.
- Install ZOMBi-POP and choose ROM2SD or DATA2SD install
The ROM2SD1.zip below is only needed if you need to switch your recovery to between normal and rom2sd mode. For Example you want to backup or restore a rom2sd installation. Flash once to go rom2sd and flash again to go back to normal. A reboot always puts you back to normal. Thanks to _that!
ROM2SD1.zip Download Mirror 1
ROM2SD1.zip Download Mirror 2
MD5 Sum: 7b699136d59ea3d5538570ccaf422acf
The DATA2SD1.zip below is only needed if you need to switch your recovery to between normal and data2sd mode. For Example you want to backup or restore a data2sd installation. Flash once to go data2sd and flash again to go back to normal. A reboot always puts you back to normal.
DATA2SD1.zip Download Mirror 1
DATA2SD1.zip Download Mirror 2
MD5 Sum: 9d5e9e2fd32593f981624499b37924b2
2. Boot to recovery – Either choose Boot to Recovery from the Power Menu if available on your current ROM or from the tablet power off hold the [volume down] button and press the [power] button. Once your see the flashing RCK icon, press [volume up] to select. If another icon is flashing use [volume down] to move between icons.
3. Using your recovery make a Nandroid Backup of your current setup
4. Select install and navigate to where you saved your ROM zip file.
5. Choose the ZOMBi-POP zip file and follow the on screen prompts to customize your installation.
6. Reboot and enjoy.
Using GParted to setup a micro SD for ROM2SD or DATA2SD!
First and foremost - DO NOT USE MINI TOOL!
Formatting a micro sd card for ROM2SD
Note for DATA2SD just do one partition in stead of 2
We will be using a GParted Live boot USB and a FAST good quality micro sd like a Sandisk or Samsung Class 10 - SDHC/SDXC UHS-1 card with read speed of at least 20MB/S. If you have a cheap chinese eBay card don't bother - they are not good enough.
You will also need a USB Stick with at least 1GB size. Note this process formats the USB disk so don't keep any important files on it. It will also wipe your micro sd so make sure you are prepared.
1. Go to the link below and download the GParted Live CD/USB/HD/PXE Bootable Image and save it somewhere you remember
http://gparted.sourceforge.net/download.php
2. Download Linux Live USB Creator and install it
http://www.linuxliveusb.com/
3. Fire up LiLi USB Creator:
a. Choose your USB key - I,e, the drive letter for your USB (not sd card)
b. Choose your GParted iso image for the source
c. Choose the check box to Format Key in FAT32 and hide files
d. Click the lightning bolt to create
4. Now you have a bootable disk you need to boot from it. You may need to alter you BIOS Settings on your PC to boot from a USB Stick but mine did it without messing.
5. Insert your micro SD card into an SD Card adapter and insert into PC
6. Boot into GParted
7. Choose Gparted Live <Enter>
8. Don’t touch keymap <Enter>
9. Languge <Enter>
10. Start Gparted Automatically
11. Change device to your micro sd )it will default to you hard disk - hda– mine is /dev/sdc
12. Delete all existing partitions
For a 64GB card: (resize as needed but /system doesn't need to be bigger than 1GB)
13. Create new, always select primary: do this 3 times.
14. FAT 32 : Size 16GB – this will be /dev/sdc1 in gparted and will be your sdcard for storage in Android
15. EXT4 : Size 42GB – this will be /dev/sdc2 in gparted and will be your /data partition in Android
16. EXT4 : Size 1GB – this will be /dev/sdc3 in gparted and will be your /system partition in Android (not needed for data2sd)
Apply, wait until it finishes and then reboot. Remember to remove the usb stick
*Images stolen from elsewhere as I couldn’t get it to save mine
Now you are ready to install ROM2SD. Note if you want to use DATA2SD then only do 2 partitions 1x FAT32 and 1x larger EXT4
Then reinstall ZOMBi-POP but this time choose the ROM2SD / DATA2SD option
Reserved
All,
The ROM is still in BETA and by flashing it you are helping the BETA Testing process
It may still have some bugs, spontaneously reboot, drain the battery faster or heat up a bit. The aim is to make it better and fix them.
If you find a bug and want to report it here please post a logcat (after it occurred) with a description of what you were doing at the time and the rough timing in the logcat to look at (these things get huge!).
You can also post a dmesg which is the kernel boot logs and can indicate issues with data corruption or hardware.
If you get a reboot then please post a last_kmsg from the /proc folder.
How to get a logcat
How to get useful logs
Thank you!!
Join us on IRC for a chat or if you have questions:
https://webchat.freenode.net/
Channel: #zombi-x
There is no Q&A section for this rom as it is still in dev so you are ok to post your questions here!
UPGRADE FROM STOCK BOOTLODER
This may help
Starting from a stock bootloader V 10.4.2.18
What you will need
Woking fastboot & adb / SDcard optional
TWRP for a 201 = twrp_tf201t.blob
TWRP for the 300 = twrp_tf300t.blob
HairyBean BL & TWRP: This is effectively turn your 201 into a 300 <---- which is a flashable zip inside the zip that you downloasd
All 3 of the above file are in a zip in the Download section @ the top of every page of the thread ...... THIS ZIP IS NOT FLASHABLE...Your must unzip it to get to the real files !!! The name of this zip is
upgrade_tf201_to_tf300t.zip
foo 201 ROM zip
A fully charged tablet
All the above files in the same directory as your fastboot.exe (if using windows) In your home folder on linux....
The process
Lets start with the TWRP recovery for the 201, let flash it with fastboot...
Power your tablet off and with the [ VOL DOWN & POWER ] buttons boot the tablet into the bootloader
Once there [ VOL DOWN ] untill the green box is on the USB ICON then [ VOL UP ] to select fastboot
Let make sure your PC can see your tablet with this command.
Code:
fastboot devices:
Code:
fastboot -i 0x0b05 flash recovery twrp_tf201t.blob
Then
Code:
fastboot -i 0x0b05 reboot-bootloader
[ VOL UP ] ON RCK to enter recovery
Once in TWRP check to see if adb is working...
Code:
adb devices
Ok now that we know that is working let go ahead and push the HairyBean BL onto the tablet
Code:
adb push HairyBean_Bootloader_TWRP2.5.zip /sdcard
Now under the install tab in TWRP fine the folder and flash it....
reboot once it has fishined..If ask to install SuperUser say NO..........
LET THE BLUE BAR FILL !!!!!!!!! Once it has finished it will reboot into Hairybean TWRP....
Once booted into recovery, run this command to boot into fastboot
Code:
adb reboot-bootloader
You will see that the USB icon is missing now, this is good... If you still see the USB icon DON'T go to the next step
Now lets flash TWRP recovery
Code:
fastboot -i 0x0b05 flash recovery twrp.blob
Once that has finished let reboot into bootloader
Code:
fastboot -i 0x0b05 reboot-bootloader
Now enter recovery....
Make sure its verison 2.7.1.0
Go to Wipe////Format Data////Type yes
This can take up to 90 mins to format
DO NOT INTERRUPT THE FORMAT !!!!!!!
Now lets push foo.zip onto your tab
Code:
adb push foo.zip /sdcard
Find it under the install tab and flash it..
REBOOT into android, first boot can take up to 15 minutes
Downloads failing for me
terrigan said:
Downloads failing for me
Click to expand...
Click to collapse
Data is it really you....
Working here ....
No idea why it would be broken, mirror 2 will be up soon.....
Thx Josh
oh man! ... was waiting for L version for my old TF201
and very, very and I mean very happy to see You guys are working on this for our beloved TF201's
lj50036 said:
UPGRADE INSTRUCTIONS
Steps
1. If you haven’t yet, unlock your TF201 by following these instructions.
2. Install the latest version of Team Win Recovery Project (TWRP) 2.7+ or ClockWorkMod Recovery 6.0.5.0+ Note this ROM will NOT install with older versions of recovery!
CWM Touch XDA Thread
CWM XDA Thread
TWRP XDA Thread
Download the recovery file from above, put it into the same folder where you have adb and fastboot files. Please rename it to twrp.blob or cwm.img and follow the instructions below:
[/HIDE]
Click to expand...
Click to collapse
no links at all .... You forgot 'em or ?!?
specially interested in TWRP
terrigan said:
Downloads failing for me
Click to expand...
Click to collapse
Full Mirror 2 @AndroidFileHost downloaded in less than a minute
Could someone please post step by step tutorial how to install this rom?
I have a cm11 unofficial rom/ android cardhu-user bootloader 1.00e released by ww_epad- 10.4.2.15-20120917 A03
and cwm rck v6.0.5.0
when i install this rom it just boots up to screen with penguins and after a while reboots
Sneaky bugger
Thank you very much team!!!!!
I would very much like to test out your rom, but there seems to be a problem with the links for the twrp and cwm recoveries provided by you. Clicking them leads me nowhere. I seem not to be able to find the proper twrp recovery 2.8 for our device. Could you please repost the links? Thank you very much
I am running Lollipop with my beloved Prime....:victory:
Have been lurking this fora and have been running Omni 4.4.4 for a while.
Took the step to this beauty....
- The default Omni kernel is broken with wifi
-Flashed with the Grimlock option but it messes up partition??? Low internal space.
- Wiped a factory reset and it works.....
Playing around but no power left, must charge....
lj50036 said:
YOU MUST BE ON THE HAIRYBEAN 2.31 JB 4.2.1 BOOTLOADER VERSION 10.6.1.27.1 AND TWRP 2.8.0.0.+ OR CWM 6.5.0.0+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
​
Click to expand...
Click to collapse
Sakeus said:
Could someone please post step by step tutorial how to install this rom?
I have a cm11 unofficial rom/ android cardhu-user bootloader 1.00e released by ww_epad- 10.4.2.15-20120917 A03
and cwm rck v6.0.5.0
when i install this rom it just boots up to screen with penguins and after a while reboots
Click to expand...
Click to collapse
if you look at the first few lines from the OP, you will see that you are apparently on the wrong bootloader. you need the Hairybean JB 4.2.1 bootloader. you can find that here: http://forum.xda-developers.com/showthread.php?t=2407248 you also need to upgrade/update your recovery. once you do those things, then you can flash this. (i'm surprised you haven't softbricked...)​
Lj50036 you killing me lol just yesterday ive flashed the tf300 version of zombiepop you posted to check it out and now i come here and found a version for tf201 haha needless to say im formating my tablet and installing this righ now thank you!
pikul said:
Lj50036 you killing me lol just yesterday ive flashed the tf300 version of zombiepop you posted to check it out and now i come here and found a version for tf201 haha needless to say im formating my tablet and installing this righ now thank you!
Click to expand...
Click to collapse
unless i'm not reading something correctly, i think the dl links are for the same tf300t rom - it's just being posted here because it's compatible with the tf201??
huskerkate said:
unless i'm not reading something correctly, i think the dl links are for the same tf300t rom - it's just being posted here because it's compatible with the tf201??
Click to expand...
Click to collapse
Yes its true....
More to come if there are issue....
Thx Josh
lj50036 said:
Yes its true....
More to come if there are issue....
Thx Josh
Click to expand...
Click to collapse
...and i should have added that not only is it compatible with the tf201, it is running quite nicely! definitely more fluid and responsive than the other LP tf300 rom i had on this thing.
thanks!!! :good:
huskerkate said:
unless i'm not reading something correctly, i think the dl links are for the same tf300t rom - it's just being posted here because it's compatible with the tf201??
Click to expand...
Click to collapse
I wiped my tablet and realized that later lol anyways did a fresh install again xD
lj50036 said:
Yes its true....
More to come if there are issue....
Thx Josh
Click to expand...
Click to collapse
Hi, Josh don´t know, what I did (what went) wrong but I´ve installed the Zombi-pop about week ago, bud I had some issues with some apps stability and reboots, and needed tablet for daily use so I ve restored nandroid of 4.4.
This weekend I do have some mor time so I´ve did a clean install of Zombi-pop and got a message about low memory space. Don´t know why - installed Zombi pop twice before without hiccups - first with your+ _that´s overclocked kernel , second time with your + sbdags´es kernel - both ok. This time with hardslog´s 5.0 linaro kernel I got the low memory message... any clue???? THX 4 answer. Nandroid backup of 4.4 . is OK again... Maybe too much gapps installed - I knoow KatKiss 5.0 had that problem????
JuraP said:
Hi, Josh don´t know, what I did (what went) wrong but I´ve installed the Zombi-pop about week ago, bud I had some issues with some apps stability and reboots, and needed tablet for daily use so I ve restored nandroid of 4.4.
This weekend I do have some mor time so I´ve did a clean install of Zombi-pop and got a message about low memory space. Don´t know why - installed Zombi pop twice before without hiccups - first with your+ _that´s overclocked kernel , second time with your + sbdags´es kernel - both ok. This time with hardslog´s 5.0 linaro kernel I got the low memory message... any clue???? THX 4 answer. Nandroid backup of 4.4 . is OK again... Maybe too much gapps installed - I knoow KatKiss 5.0 had that problem????
Click to expand...
Click to collapse
You should go settings/storage and click clean cache memory then reboot your prime
Same thing happens when clean dalvik cache and cache from twrp on katkiss 5.0
Could somebody please tell me where I can find Twrp 2.8? When checking their website I can only find 2.6 for our device....

[ROM][6.0.1] Masik Marshmallow 1.2 Aroma (JAN 27, 2016)

Masik™ Marshmallow 1.2
JANUARY 27, 2016
Masik Developer Base
Description
Original Thread On 4PDA
DEVICES SUPPORT LIST:
G920F + G920FD
DESCRIPTION AND CHANGES:
- Based on Beta 3ZPA1 Android 6.0.1 Marshmallow
- Clean, Fast, Stable, Smooth, ODEXED
- Removed KNOX and All depends of KNOX-services
- Removed Bloatware Samsung from market
- Removed Bloatware Google from market
- Disabled Signature Verification Checking of packages
- Changed battery charge animation when device power off
- Some CSC tweaks (Added only stable tweaks)
- Native Call Recording in dialer
- Working private mode
- Working fingerprint scaner sensor
- Removed All crash monitors and bugreports services
- Removed all services of device automation test
- Cleaned and symplifired some system scenarios
- All stock and some others apps in MultiWindow
- New audio effects, ringtones, notifaction, UI
- Changed wallpapers (HD, author: Me)
- New nice fonts in settings
- And More​
Screenshots
SCREENSHOTS
Installation
If you have installed Masik Marshmallow 1.0 follow this instruction:
1. Copy "Masik™ Marshmallow 1.1.zip" to your device
2. Install with TWRP and hawe fun
If you install Android 6.x ROM first time follow this instructions:
1. At first download files:
-"Odin 3.10.7"
- "MM Bootloader.tar"
- "TWRP New.tar"
- "Masik™ Marshmallow 1.X.zip"
2. Copy "Masik™ Marshmallow 1.X.zip" to your device
3. Reboot device into Download mode (VOLUME DOWN + POWER + HOME). Run Odin 3.10.7, put in menu "BL" file "MM Bootloader.tar" and flash it, click Start button
4. . Reboot device into Download mode again, Run Odin 3.10.7, put in menu "AP" file "TWRP New.tar" and flash it
5. Reboot device into Recovery mode (when device is off push VOLUME UP + POWER + HOME), go to "WIPE", make "Factory Reset", then - Wipe Cache, Data, Dalvik, System
7. Then go to "INSTALL" and choose file "Masik™ Marshmallow 1.X.zip"
8. Have fun with my ROM. Good luck, my friends​
Download
YANDEX: Masik™ Marshmallow 1.1
GOOGLE: Masik™ Marshmallow 1.1
YANDEX: Masik™ Marshmallow 1.2
Odin 3.10.7
TWRP New.tar
TWRP Old.tar
MM Bootloader
Masik Marshmallow MODs and Addons Collection
Masik Sources
Credits
Samsung for the stock base
AlexMailOne for great ideas of using dump
Manh_IT for dumping of beta ROM
Donate
You Can Donate if You Like Masik ROM:
YandexMoney: 410012628221349
WebMoney: Z204399304908
WebMoney: E247117135233
If You Like My Work Hit The :good: Button​
Masik™ Marshmallow MODs and Addons Collection:
1. Android M Dump for Recovery.zip
2. Ok Google Install.zip
3. Ok Google Remove.zip
4. System Animation (Flyme OS).zip
5. System Animation (iOS).zip
6. MM SuperSU 2.66
7. MM SuperSU 2.67
8. MM Stock Recovery.tar
9. MM Stock Recovery.zip
DESCRIPTION AND CHANGES
Masik MM 1.0:
- Based on Beta 3ZPA1 Android 6.0.1 Marshmallow
- Clean, Fast, Stable, Smooth, ODEXED
- Removed KNOX and All depends of KNOX-services
- Removed Bloatware Samsung from market
- Removed Bloatware Google from market
- Disabled Signature Verification Checking of packages
- Some CSC tweaks (Added only stable tweaks)
- Native Call Recording in dialer
- Working private mode
- Working fingerprint scaner sensor
- Removed All crash monitors and bugreports services
- Removed all services of device automation test
- Cleaned and symplifired some system scenarios
- All stock and some others apps in MultiWindow
- New audio effects, ringtones, notifaction, UI
- Changed wallpapers (HD, author: Me)
- New nice fonts in settings
- And More
G920I
Hi You mentioned that it supports G920I, I followed your instruction, but the Bootloader failed to install. Can this be installed with old BL or does that mean it does not support G920I?
Hi,
I will tested her right away!
Hello, I'm wondering if the new flash the bootloader and then me not work otherwise Stara rom not a zpatky old bootloader or not to flash it? Thank you for answer.
How do you find battery life regarding android 5.1.1????
Can you make the flashable zip for recovery?, I have working recovery and bootloader for MM already
+1
rimonayoub said:
Hi You mentioned that it supports G920I, I followed your instruction, but the Bootloader failed to install. Can this be installed with old BL or does that mean it does not support G920I?
Click to expand...
Click to collapse
So.. Compatible with 920i or not? Please confirm and correct the OP if it is not..
Edit: just saw the edit made to the OP.. F and FD only
Masik Development said:
Masik™ Marshmallow 1.0
(JAN 20, 2016)
Masik Developer Base
Description
Original Thread On 4PDA
DEVICES SUPPORT LIST:
G920F + G920FD
DESCRIPTION AND CHANGES:
- Based on Beta 3ZPA1 Android 6.0.1 Marshmallow
- Clean, Fast, Stable, Smooth, ODEXED
- Removed KNOX and All depends of KNOX-services
- Removed Bloatware Samsung from market
- Removed Bloatware Google from market
- Disabled Signature Verification Checking of packages
- Some CSC tweaks (Added only stable tweaks)
- Native Call Recording in dialer
- Working private mode
- Working fingerprint scaner sensor
- Removed All crash monitors and bugreports services
- Removed all services of device automation test
- Cleaned and symplifired some system scenarios
- All stock and some others apps in MultiWindow
- New audio effects, ringtones, notifaction, UI
- Changed wallpapers (HD, author: Me)
- New nice fonts in settings
- And More​
Screenshots
SCREENSHOTS
Installation
1. Download files: "Odin 3.10.7", "MM Bootloader.tar", "TWRP New.tar", "Masik™ Marshmallow 1.0.zip"[/URL]"
2. Unpack "Masik™ Marshmallow 1.0.zip", move extracted folder "TWRP" to your device
3. Run Odin 3.10.7, put in menu "BL" file "MM Bootloader.tar" and flash it
4. Run Odin 3.10.7, put in menu "AP" file from "TWRP New.tar" and flash it
5. Run TWRP - "WIPE" - "Factory Reset", then - Wipe Cache, Data, Dalvik, System
7. Go to "RESTORE" and restore "SYSTEM" + "BOOT", reboot your device and have fun
Download
Masik Marshmallow 1.0
Odin 3.10.7
TWRP New.tar
TWRP Old.tar
MM Bootloader
MM SuperSU
MM Stock Recovery.tar
MM Stock Recovery.zip
Masik Store
Masik Samsung S6 Files
Credits
Samsung for the stock base
AlexMailOne for some tweaks
Manh_IT for beta ROM
Donate
You Can Donate if You Like Masik ROM:
YandexMoney: 410012628221349
WebMoney: Z204399304908
WebMoney: E247117135233
If You Like My Work Hit The :good: Button​
Click to expand...
Click to collapse
Masik, can you explain installation more detailed, step 6 is missing?....Thank you.
@Masik Development, amazing work and all my gratitud! Only one doubt about installation method : why do you choose a backup nandroid way? It's not an usual method compared with a classic zip format to flash
can you do it for 925?
miloshp said:
Masik, can you explain installation more detailed, step 6 is missing?....Thank you.
Click to expand...
Click to collapse
+1
Pls Post changelog
miloshp said:
Masik, can you explain installation more detailed, step 6 is missing?....Thank you.
Click to expand...
Click to collapse
Ok, boss. Sorry for my English
1. At first download files:
-"Odin 3.10.7"
- "MM Bootloader.tar"
- "TWRP New.tar"
- "Masik™ Marshmallow 1.0.zip"
2. Unpack/Extract file "Masik™ Marshmallow 1.0.zip" with 7z or WinRAR, you got folder "TWRP", move extracted folder "TWRP" to your device into root of device memory
3. Reboot device into Download mode (VOLUME DOWN + POWER + HOME). Run Odin 3.10.7, put in menu "BL" file "MM Bootloader.tar" and flash it, click Start button
4. . Reboot device into Download mode again, Run Odin 3.10.7, put in menu "AP" file from "TWRP New.tar" and flash it
5. Reboot device into Recovery mode, go to "WIPE", make "Factory Reset", then - Wipe Cache, Data, Dalvik, System
7. Then go to "RESTORE" and choose restore of "SYSTEM" and "BOOT", after finish reboot your device and have fun with my ROM
Masik Development said:
Ok, boss. Sorry for my English
1. At first download files:
-"Odin 3.10.7"
- "MM Bootloader.tar"
- "TWRP New.tar"
- "Masik™ Marshmallow 1.0.zip"
2. Unpack/Extract file "Masik™ Marshmallow 1.0.zip" with 7z or WinRAR, you got folder "TWRP", move extracted folder "TWRP" to your device into root of device memory
3. Reboot device into Download mode (VOLUME DOWN + POWER + HOME). Run Odin 3.10.7, put in menu "BL" file "MM Bootloader.tar" and flash it, click Start button
4. . Reboot device into Download mode again, Run Odin 3.10.7, put in menu "AP" file from "TWRP New.tar" and flash it
5. Reboot device into Recovery mode, go to "WIPE", make "Factory Reset", then - Wipe Cache, Data, Dalvik, System
7. Then go to "RESTORE" and choose restore of "SYSTEM" and "BOOT", after finish reboot your device and have fun with my ROM
Click to expand...
Click to collapse
And to go back to LL flash TWRP Old + Old Bootloader right?
Download-Speed limited to 64kb/s?, no thank you
EasyGoingXD said:
And to go back to LL flash TWRP Old + Old Bootloader right?
Download-Speed limited to 64kb/s?, no thank you
Click to expand...
Click to collapse
Yes, Old TWRP and Bootloader) Login Yandex and speed will grow up to 8 mb/sec. Youre wellcome, my friend.
EasyGoingXD said:
And to go back to LL flash TWRP Old + Old Bootloader right?
Download-Speed limited to 64kb/s?, no thank you
Click to expand...
Click to collapse
Yaiks
Sent from my SM-G920F using XDA Premium HD app
marcel112 said:
Yaiks
Sent from my SM-G920F using XDA Premium HD app
Click to expand...
Click to collapse
Masik Development said:
Yes, Old TWRP and Bootloader) Login Yandex and speed will grow up to 8 mb/sec. Youre wellcome, my friend.
Click to expand...
Click to collapse
Twrp backup is not reconised by twrp recovery

[Bootanimation][TW][New Galaxy Logo]

New Galaxy logo Bootanimation ​
Download here :
https://mega.nz/#!lVRXXCKL!LI3V-EKonSEV4iFq3U-oK70tYitkDM853jLqwlHyIH0
Instructions to install this ::
1. Download zip file
2. Boot into Recovery (Twrp recommended)
3. Flash the Zip
4. Reboot and enjoy
Screens, please?
Screen shot
video please
post its useless without it
Could you please resize the bootsamsung.qmg to the same size as the bootsamsungloop.qmg? thanks

Custom Splash [NEW ONE PLUS VERSION!] [x52x][Daily!]

Warning: I am not responsible for any errors ,dead phones,bricked phone etc .your warranty will be void after this. If you blame me for anything I will simply laugh at you.
GUYS NOW YOU CAN CHANGE YOUR SPLASH IMAGE .I WILL BE ACCEPTING REQUESTS.
Special thanks to :GokulNC for providing splash IMG creator.
Please reply your requests
Rules:
1:No specific names should be involved ( like your name).
2:Anything like batman theme or anything else in that criteria will be accepted
The thread has been changed to DAILY releases!!
Hit thanks if you want me to spend my time on this.
Check post #2 for downloads.
BATMAN version released!
IRONMAN version released!
WATCHDOGS version released!
PIXEL version released!
Xperia version released!
IRONMAN V2 released!
DHONI version released!
ONE PLUS version released!
Cheers!:highfive:
Contributors:
@me(Gautham V)
@DarknessKiller
DOWNLOADS!
v0.1 [basic]
First One for you guys to have an idea about this:
link: GOOGLE DRIVE
Whats Special: -removed chinese stuff.
-added twrp indicator for recovery.
-specicfied device name.
How to use:
For TWRP
- Goto Recovery
- Flash the basic splash v0.1
- DONE
For CMD
- Open CMD
- Type fastboot flash splash basicsplashv0.1.img
- Done
screenshots:
Click Here
v1 [BATMAN!]
link: GOOGLE DRIVE
Whats Special: -added batman sybol.
-added batmobile for fastboot.
-specicfied device name.
-added glow batman symbol for recovery/twrp.
How to use:
For TWRP
- Goto Recovery
- Flash the bat man splash v1
- DONE
For CMD
- Open CMD
- Type fastboot flash splash batmansplashv1.img
- Done
screenshots:
Click Here
IRON MAN
link: GOOGLE DRIVE
Whats Special: -removed chinese stuff.
-added iron man stuff!.
-specicfied device name.
How to use:
For TWRP
- Goto Recovery
- Flash the iron man splash
- DONE
For CMD
- Open CMD
- Type fastboot flash splash ironmansplash.img
- Done
screenshots:
included in the drive folder.
WATCHDOGS
link: GOOGLE DRIVE
Whats Special: -removed chinese stuff.
-added watchdogs stuff!
-specicfied device name.
How to use:
For TWRP
- Goto Recovery
- Flash the watchdogssplash
- DONE
For CMD
- Open CMD
- Type fastboot flash splash watchdogssplash.img
- Done
screenshots:
included in the drive folder.
Pixel
link: GOOGLE DRIVE
Whats Special: -removed chinese stuff.
-added pixel stuff!
-specicfied device name.
How to use:
For TWRP
- Goto Recovery
- Flash the pixel splash
- DONE
For CMD
- Open CMD
- Type fastboot flash splash pixel splash.img
- Done
screenshots:
included in the drive folder
Xperia (Thanks to @DarknessKiller for providing this
splash)
link: GOOGLE DRIVE
Whats Special: -removed chinese stuff.
-added Xperia symbol!!
-specicfied device name.
How to use:
For TWRP
- Goto Recovery
- Flash the xperia splash
- DONE
For CMD
- Open CMD
- Type fastboot flash splash xperiasplash.img
- Done
screenshots:
included in the drive folder
IRONMAN V2(Thanks to @DarknessKiller for providing this
splash)
link: GOOGLE DRIVE
Whats Special:
-removed chinese stuff.
-added better ironman stuff!!
-specicfied device name.
How to use:
For TWRP
- Goto Recovery
- Flash the ironmanv2splash
- DONE
For CMD
- Open CMD
- Type fastboot flash splash ironmanv2splash.img
- Done
screenshots:
included in the drive folder
DHONI
link: GOOGLE DRIVE
Whats Special:
-removed chinese stuff.
-added Dhoni stuff!!
-specicfied device name.
How to use:
For TWRP
- Goto Recovery
- Flash the dhoni splash
- DONE
For CMD
- Open CMD
- Type fastboot flash splash dhonisplash.img
- Done
screenshots:
included in the drive folder
ONE PLUS
link: GOOGLE DRIVE
Whats Special:
-removed chinese stuff.
-added One plus stuff!!
-specicfied device name.
How to use:
For TWRP
- Goto Recovery
- Flash the oneplus splash
- DONE
For CMD
- Open CMD
- Type fastboot flash splash oneplussplash.img
- Done
screenshots:
included in the drive folder
Reserve #2
Looks nice - no chinese texts anymore in Fastboot Mode. Flashed it with TWRP 3.1.1-1 on my X527. Thank you
Andy_04 said:
Looks nice - no chinese texts anymore in Fastboot Mode. Flashed it with TWRP 3.1.1-1 on my X527. Thank you
Click to expand...
Click to collapse
:good:
Guys updated thread with promised weekly splash and this time its *drumrolls* BATMAN!
CHEERS!!:highfive:
new poll please answer guys,i only did the poll because i am not getting any feedback
Gautham V said:
new poll please answer guys,i only did the poll because i am not getting any feedback
Click to expand...
Click to collapse
Hey batman is good create one on irom man plz
---------- Post added at 10:46 AM ---------- Previous post was at 10:45 AM ----------
Gautham V said:
new poll please answer guys,i only did the poll because i am not getting any feedback
Click to expand...
Click to collapse
And y there are two file img for image file y zip?
Can u make watch dogs splash
hkee96 said:
Hey batman is good create one on irom man plz
---------- Post added at 10:46 AM ---------- Previous post was at 10:45 AM ----------
And y there are two file img for image file y zip?
Click to expand...
Click to collapse
One is for flashing in fastboot mode and zip is for flashing it in twrp recovery and sure I will do iron man
VikasBhapri said:
Can u make watch dogs splash
Click to expand...
Click to collapse
Sure​?.
i got a request i try to make one a while a go but my time is short now days ill love google pixel splash if you can :good:
Gautham V said:
One is for flashing in fastboot mode and zip is for flashing it in twrp recovery and sure I will do iron man
Click to expand...
Click to collapse
Can you make one featuring MS Dhoni? Some amazing pictures?
Sure Budd PM
guys i have uploaded 3 new ones
IRONMAN version released!
WATCHDOGS version released!
PIXEL version released!
have fun flashing!
Cheers!:highfive:
Maibol said:
i got a request i try to make one a while a go but my time is short now days ill love google pixel splash if you can :good:
Click to expand...
Click to collapse
Done bro!
ashwani.shakya said:
Can you make one featuring MS Dhoni? Some amazing pictures?
Click to expand...
Click to collapse
I will try!
Dhoni splash in progress!
Can anybody tell me what is splash?
Anish117 said:
Can anybody tell me what is splash?
Click to expand...
Click to collapse
It is first thing that comes when you reboot your phone .
The leeco logo is set as default splash

[Updated 16-05-2018]AEX Unofficial Bootanimation(1920*1080)[Substratum][flashable]

AOSP EXTENDED UN-OFFICIAL BOOTANIMATION
All bootanimations are designed by me [EarthC]
The project will update and add MORE and MORE bootanimation or fix somemistakes.
There are THREE Ways to install it:
Through Substratum Theme Maganer with OMS [Recommanded]​For Nouget / Marshmallow :install and choose the bootanimation driectly --> Apply!
For Oreo : install and choose the bootanimation --> Apply
(It is recommanded to give ROOT permission to the Substratum manager and apply the bootanimation for more than one time)
Download Link:https://www.androidfilehost.com/?fid=746163614322264484
All update of this bootanimation Substratum Theme
It is recommanded to follow the future update of this bootanimation through Coolapk: https://www.coolapk.com/apk/substratum.earth.aexbootani
Through flashing zip​Download , Reboot to Recovery (mainly TWRP) and flash the zip.
It is recommanded to backup stock bootanimation file.
Link : https://www.androidfilehost.com/?fid=746163614322264698
All flashable zip: https://www.androidfilehost.com/?w=files&flid=270623
Replace stock bootanimation file by man (Not recommanded)​Download Substratum theme or flashable zip from upside , then uncompress the theme apk or the flash zip.
Then rename the bootanimation from /assets/bootanimation of substratum theme apk file into "bootanimation.zip" and replace the stock bootanimation in /system/media/
or uncompress the flashable zip and replace the stock bootanimation in /system/media/
Thank:
AOSP Extended develop team : for its great work in making AEX better
AndroidFileHost : for supporting file storing
Coolapk Team : for supporting Substratum Theme apk file storing
Pzqqt : for his support
Someone from the mainland of China : for his support and help testing
Create : 20180516
Update : 20180516

Categories

Resources