I have installed CM9 and not really satisfied after using it for 1 day... its quite unstable... now i want to downgrade to my stock rom. Is that possible? Please help.
tpteam6 said:
I have installed CM9 and not really satisfied after using it for 1 day... its quite unstable... now i want to downgrade to my stock rom. Is that possible? Please help.
Click to expand...
Click to collapse
You are joking right?
Have you tried this CM9/
Neo
Neo V
Its the OFFICIAL STABLE cyanogenmod for the NEO. It is VERY STABLE and has everything working.
Apart from that, to revert back to stock, just flash a stock kernel (Or any modded kernel for stock) and restore the backup you made before flashing the cm9 rom.
tahnks
gregbradley said:
You are joking right?
Have you tried this CM9/
http://download.cyanogenmod.com/?type=stable&device=hallon
Its the OFFICIAL STABLE cyanogenmod for the NEO. It is VERY STABLE and has everything working.
Apart from that, to revert back to stock, just flash a stock kernel (Or any modded kernel for stock) and restore the backup you made before flashing the cm9 rom.
Click to expand...
Click to collapse
The roms that you have suggested are for "neo". i am using "neo v" and the reson i wanna go back to stock is because i con not onnect to my gmail account with cm9 over data connection. Its giving me some sort of an error: can not establish reliable connection....."...
now for going back to stock ics can i just flash it via cwm and i will be back in stock ics? dont i need to flash karnel or anything like that?
tpteam6 said:
The roms that you have suggested are for "neo". i am using "neo v" and the reson i wanna go back to stock is because i con not onnect to my gmail account with cm9 over data connection. Its giving me some sort of an error: can not establish reliable connection....."...
now for going back to stock ics can i just flash it via cwm and i will be back in stock ics? dont i need to flash karnel or anything like that?
Click to expand...
Click to collapse
I just added the link for the neo v
Yes, you need stock kernel.(or modded kernel for stock roms)
The kernel for CM will not work with stock rom.
My suggestion is to try the stable cm9 for neo v from my link. If you are still unhappy then download a stock kernel, flash it it fastboot then restore your stock backup in recovery.
Do remember, if you flash stock kernel you will have to install a recovery. Or you can flash the alliance kernel from this thread
Tahnks
gregbradley said:
I just added the link for the neo v
Yes, you need stock kernel.(or modded kernel for stock roms)
The kernel for CM will not work with stock rom.
My suggestion is to try the stable cm9 for neo v from my link. If you are still unhappy then download a stock kernel, flash it it fastboot then restore your stock backup in recovery.
Do remember, if you flash stock kernel you will have to install a recovery. Or you can flash the alliance kernel from this thread
Click to expand...
Click to collapse
well i think im in trouble now... i havent kept any backup of the stock rom. So cant i just flash the stock karnel then install the stock rom via cwm?
tpteam6 said:
well i think im in trouble now... i havent kept any backup of the stock rom. So cant i just flash the stock karnel then install the stock rom via cwm?
Click to expand...
Click to collapse
Rule number 1
Always backup, just in case you **** up!
Anyway, no problem, there are several options.
Find a stock .ftf in the dev section and flash that in flashtool after you have flashed the stock kernel.
Or, repair phone software using PCCompanion.
This will revert your phone to factory settings (Out of the box).
Or just follow the instructions in any "stock" based custom rom. I recommend Ice cream Pureness. Its a very good stock ICS based rom, fully functional and stable
tutorial
gregbradley said:
Rule number 1
Always backup, just in case you **** up!
Anyway, no problem, there are several options.
Find a stock .ftf in the dev section and flash that in flashtool after you have flashed the stock kernel.
Or, repair phone software using PCCompanion.
This will revert your phone to factory settings (Out of the box).
Or just follow the instructions in any "stock" based custom rom. I recommend Ice cream Pureness. Its a very good stock ICS based rom, fully functional and stable
Click to expand...
Click to collapse
is there is any specific tutorial on this? or download links for .ftf, stock karnel?
thanks... i have flashed stock karnel then installed stock rom... it worked like charm!!...
this is the weird thing which i faced with my android device. i flashed to cm10.1 + lupus jb kernal. now my device keep restarting. i thought it was rom fault. then i tried jellyvanilla ex1.0. but problem was same. then i reflashed to stock rom via seus. but still my device keep rebooting when i use internet. im not sure what is the reason for it. i did everything which i can do.
anybody have any idea about this problem hope i will get a answer
cm roms need freexperia kernal. you can find the kernal (boot.img) file in the rom zip file. flash that kernel and reflash the rom.
RavinduSha said:
cm roms need freexperia kernal. you can find the kernal (boot.img) file in the rom zip file. flash that kernel and reflash the rom.
Click to expand...
Click to collapse
but problem is even get reboot on stock rom
not sure if this works or not. try to reflash or change the kernal.
RavinduSha said:
not sure if this works or not. try to reflash or change the kernal.
Click to expand...
Click to collapse
did it several time bro, i think its not matter of rom
Hello!
I had flashed my first cyanogenmod a couple of days back with kernal flashing and all that(very 1st cm on my neo v....cm10 nightly) and after that i flashed some other rom which was not cm based and after flashing properly and rebooting from cwm my screen was just black....nothing showed up....so my question is do i need to flash the kernal of that rom the same way as i did of cm10(extract the boot.img and flash it from flashtools) or is there something wrong with my phone? please help
xkaushx said:
Hello!
I had flashed my first cyanogenmod a couple of days back with kernal flashing and all that(very 1st cm on my neo v....cm10 nightly) and after that i flashed some other rom which was not cm based and after flashing properly and rebooting from cwm my screen was just black....nothing showed up....so my question is do i need to flash the kernal of that rom the same way as i did of cm10(extract the boot.img and flash it from flashtools) or is there something wrong with my phone? please help
Click to expand...
Click to collapse
in general you must flash the kernel included in the ROM. it's the only way to be sure that everything will work properly. Some combinations can make the phone not booting.
milanjm said:
in general you must flash the kernel included in the ROM. it's the only way to be sure that everything will work properly. Some combinations can make the phone not booting.
Click to expand...
Click to collapse
i dint get what you are trying to say........so you saying that i need to flash the kernal of the non cm based rom?
Yeah.
Sent from my Dark Xperia neo V
Hi i have this problem for 2 days and i dont know why. I was on lollipop cm12 and i change to back to noot rom there i didn't have signal and i flash a cm11 than there i have signal but only with emergency call only. From there i tried to flash modems and official samsung firmware but nothing helped. What can i do ?????
It might a kernel issue, but as you don’t give much information, it’s difficult for people to help you. In order to increase your chance to be answered, you should try to be as specific as possible and describe your full software configuration: rom, kernel, recovery, modem etc…
now i am on cm12 week 7 with boeffla kernel, cwm recovery and my baseband is i9300xxemg4 , where can i find my modem ???
anonim14 said:
now i am on cm12 week 7 with boeffla kernel, cwm recovery and my baseband is i9300xxemg4 , where can i find my modem ???
Click to expand...
Click to collapse
You need to flash back to stock with odin make sure its 4.3 stock rom then if you still have no signal flash this patched modem and kernel with a custom recovery >> https://drive.google.com/folderview...=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#lis << make sure to factory reset after flashing if you get a bootloop.
odin doesn't let me to flash I9300ZCUBMK2 firmware
anonim14 said:
odin doesn't let me to flash I9300ZCUBMK2 firmware
Click to expand...
Click to collapse
Try using Odin 1.85 from here or use a different stock rom >> http://www.andromint.com/download-odin-latest-version/ <<
thx very much for the help guys
Hello,
Tried all ROMS, none is working, below is the detail:
Installed
1 . CRISSCROSS ROM - no audio, while on call in earpiece and loudspeaker
2 . XtreStoLite-ROM-3.3.1-DPDP.zip ROM, Problem - AFter flash Phone model shows G925F AND NO CONNECTION TO NETWORK, EMERGENCY CALLS ALL TIME, TRIED flashing MODEM for g925w8 no LUCK
3. KIngfisher ROM, after flashing Kingfisher ROM, phone is STUCK AT
*KERNEL IS NOT SEANDROID ENFORCING* and phone will not turn ON.
SO , I guess there is NO working CUSTOM ROM fOR G925W8,canada. At the end I flashed stock BOJ7 AND Phone is working perfectly with 5 1 1 G925W8 BOJ7
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
KAwAtA said:
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
Click to expand...
Click to collapse
so why am I getting emergency calls?
1 can you tell me in detail that which steps did you follow?
2 what was your android version when you flashed rom?
3 what is your baseband verison now?
4 Was it rooted already?
5 Does this rom have spanish langauage? can you check for me?
Thank you
@Administr4tor
Custom ROMs for that work for W8
I've have confirmation from multiple users that my OZOP Rom is compatible and working flawlessly for the following devices Flat and Edge (rom is Edge based) F/I/T/W8. Could be more this are just the confirmed working devices.
Also OZOP is currently very active with development and actually about to be updated!
What ever Rom you decide is up to you.
Just letting you know there are options available.
Good luck
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Nothing seems to work, No matter what I have No network connection... on any rom..
AndroTechGuy said:
Nothing seems to work, No matter what I have No network connection... on any rom..
Click to expand...
Click to collapse
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
I could have sworn I was running 6.0.1 stock, Maybe I wasn't, but alright I'll try to find the radio. thanks mate
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
yes, I need updated call fix as the one I have is only for 5 1 1
Administr4tor said:
yes, I need updated call fix as the one I have is only for 5 1 1
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
AndroTechGuy said:
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
I know how to do it, the phone is unlocked, so not sure what carrier I should be flashing on it. I legit just need it to be able to use the Network, currently have it custom rom'd but no network.
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
So the best I've been able to do is get it on a custom rom with no network connection at all. Seems like Im losing the ability to get it working. I tried Wind, telus stock 6.0.1's and i get the SW rev error, I've tried Rogers 5.1.1, and I get the same. Only thing that flashed on my device was "AP_G925W8VLU2AOG2_CL4808800_QB5701859_REV02_user_low_ship.tar" but it didn't boot past Galaxy S6 Edge logo, and recovery wasn't loading to try and factory reset to continue boot. I'm pretty sure this phone is dead.... I mean the custom rom was 6.0.1 with arter kernel, but no service... I'm lost...
christopherrrg said:
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
Click to expand...
Click to collapse
Thanks Sir.
Any ideas to my posts above?
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Just update stock system to Marshmallow 6.0.1 (or flash stock 6.0.1 via Odin), then flash TWRP, do standard wipe with TWRP (Data, Cache and Dalvik), flash XtreStoLite via TWRP and everything will work
I have canadian S6 Edge and XtreStoLite is working very good
cripez said:
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Click to expand...
Click to collapse
issue is I can't make the 6.0.1 stock files flash, always getting the SW rev error when cm.bin tries to flash, I've tried, Rogers, Wind, Telus stock files, nothing works. On CrissCross right now but not service... I want to get back to stock or at least make the bootloader work.
EDIT: Apparently using the most recent koodo stock, got me back to stock rom and with service! Now to root and do the custom rom properly! Thanks all!
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
THIS G925W8 is working perfectly in 5 1 1 , I was able to make calls to all networks including GSM and WCDMA, I checked IMEI status with code 197328640 and IMIE status is OK, then after I flashed 6 0 1 and then the IMIE status turns to NOT GOOD and I am unable to make calls and stuck at EMERGENCY CALLS, looks like this PHONE IS JACKED??