I just bought this HDMI DLNA / Miracast receiver stick. The model seems to be a "Ugoos UG017" aka "Chromecast MD321" aka "MOCREO iPush M1" aka "HI762 HI763 (Chromecast)" aka "CX-V3" aka "PTV-2R" and possible more names. The hardware is:
- Rockchip RK2928-G @~1GHz
- 256MB DDR3
- 16 MB NAND
- RT3188 WLAN-Chip
- Push-switch to toggle DLNA / Miracast mode
There seems to be a UART available on some test points on the PCB. Any ideas on how to connect to that (settings)?
DLNA through BubbleUPnP is more or less working (skipping seems to lock the stick, playing playlists too), but Miracast is not, at least not on my Xperia L with CyanogenMod 11 / FXP 333.I tried the firmware for the "Pipo X5" and "MOCREO iPush M1" (both ~14MB) and both worked. Both state version "3.0.0-rc2". I would be thrilled if someone could link to a newer (and hopefully more bug-free) version than that...
EDIT: If found a link to a much better firmware (v5.0.0-rc2) for the CX-V3 here. DLNA is much better. Miracast still does not work, but I suppose that's just FXP 333...
if someone is interested this firmware allowed me to miracast with a samsung galaxy tab s
tried other firmwares (CR-M200,ugoos-ug017,CX-V3) but only this was updated
http://www.cloudnetgo.com/CR-M200S.htm
Regards
galaxy tab s
Hi Lucize,
I tried the firmware you posted, but the problem remains: "Impossible to initiate screen mirroring due to a HW problem"
What Android version do you have on your TAB S? Is it a 8.4 or 10.5 version?
Thanks in advance!
CR-M200 firmware on WiFi Display Dongle M806 on SM-G900V
lucize said:
if someone is interested this firmware allowed me to miracast with a samsung galaxy tab s
tried other firmwares (CR-M200,ugoos-ug017,CX-V3) but only this was updated
Regards
Click to expand...
Click to collapse
Thank you so much, lucize! It worked! I was able to miracast with my Galaxy S5 using the built in screen mirroring function. My android version is 4.4.4.
I got a Tronsmart CX-V3 dongle and I was wondering how to update it, since Tronsmart has -of course- no updates. So tried to find some more clones who could have an update and maybe even the manufacturer.
The latest I managed to find is version 9.0.0, dated 21-4-2015, by Ergotech. Their MD3054 and MD3056 seem to be the same according to the doc file in MD3054's update (8.0.0 rc1) (*1), so I downloaded MD3056's (*2) and flashed it. Sunchip-Tech strongly advices to update the software(*3), so i didn't have any hesitations.
A PDF included in 3056's update as well in the *3 link, indicates that there is OTA update option via the manufacturer (Sunchip-Tech). This means that maybe all Miracast sticks of this manufacturer can be updated directly by Sunchip-Tech. Keep in mind that the menu language will be switched to Chinese after the update, but it can be very easily switched back to English in the settings menu.
Ergotech's download page can be found in link *4.
While searching, I noticed than some RK2928 based Miracast dongles were called Lollipop (not because of Android). I searched a bit more and found Rockchip's user guide for RK2928 wireless HDMI dongles(*5), which calls RK2928 dongles as Lollipop. Seems that the reference Rockchip design is followed by the manufacturers. In that user guide I noticed the settings screen is same as my dongle's, but the main screen picture is different though same to some other RK2928/Lollipop dongles I had seen while searching. So probably there is an other manufacturer who kept the original main screen and maybe has even newer software. I did some more searching and the latest I could find is CloudNet's 3.21.00 (dated 28-5-2015) for CR-M200S. This one has OTA settings too, unveiling its manufacturer is Hotack. I believe it is a newer version than Ergotech's/Sunchip-Tech's version 9.0.0 because it has boot version 1.41 instead of 1.40.
CR-M200S download page is at link *6 and in lucize's post too.
Relatively new firmwares are also available by these companies:
Emtec (emtec-international.com/en-eu/Firmware-F100)
Ugoos (ugoos.net/A3S)
*1 drive.google.com/file/d/0B3bETZxL2iACYXdvV2VIdVh4dUU/view
*2 drive.google.com/file/d/0B3bETZxL2iACRXRZWndNRDRwZmM/view
*3 ergotech.com.tw/tw/newsdetail.aspx?id=106
*4 ergotech.com.tw/tw/Download_detail.aspx?key=
*5 upload.sunsky-online.com/res/drivers/S-EAT-0179.pdf
*6 cloudnetgo.com/CR-M200S.htm
talos_2002 said:
I did some more searching and the latest I could find is CloudNet's 3.21.00 (dated 28-5-2015) for CR-M200S. This one has OTA settings too, unveiling its manufacturer is Hotack. I believe it is a newer version than Ergotech's/Sunchip-Tech's version 9.0.0 because it has boot version 1.41 instead of 1.40.
CR-M200S download page is at link *6 and in lucize's post too.
*6 cloudnetgo.com/CR-M200S.htm
Click to expand...
Click to collapse
I can approve that the CR-M200S firmware you linked works quite well. Have you tried the OTA update too?
Latest firmware (MD3056PW 3/sept/15) is from ergotech. Version 10. However there is no dlna subtitle support yet. I am waiting for this firmware to appear soon. None of the firmwares support subtitles over dlna. There is a metadata code that can be used on the firmware to support subs. My nas network disk (twonky server) supports metadata as most do. I am using version 10 without any problems. The only other problem I have is my tablets resolution which is not supported, 1280x 800, which gives me black borders on the sides on the casting TV (when on landscape). I have tried all firmwares with the same result.
There is a metadata code in ezcast forum that they have used to display subtitles over dlna which I am not allowed to post.
Also I have managed to use kodi/xbmc to display videos over dlna but no subs support again. There is a YouTube video and files you need in order to accomplish this.
cypriot said:
Latest firmware (MD3056PW 3/sept/15) is from ergotech. Version 10. However there is no dlna subtitle support yet. I am waiting for this firmware to appear soon. None of the firmwares support subtitles over dlna. There is a metadata code that can be used on the firmware to support subs. My nas network disk (twonky server) supports metadata as most do. I am using version 10 without any problems. The only other problem I have is my tablets resolution which is not supported, 1280x 800, which gives me black borders on the sides on the casting TV (when on landscape). I have tried all firmwares with the same result.
There is a metadata code in ezcast forum that they have used to display subtitles over dlna which I am not allowed to post.
Also I have managed to use kodi/xbmc to display videos over dlna but no subs support again. There is a YouTube video and files you need in order to accomplish this.
Click to expand...
Click to collapse
I tried this vs the CR-M200S firmware, and the CR-M200S firmware is still the best imo. With my iphone that is the only one where mirroring works, and it seems to be less buggy.
Still awaiting a new better update than the CR-M200S . Youtube doesnt work with any of them!
have someone tried mirroring wich this device on wp 8.1?
lokura said:
have someone tried mirroring wich this device on wp 8.1?
Click to expand...
Click to collapse
I also have the same problem. WiDi of windows 8.1 (with supported hardware) does not work with the Chinese miracast dongle RK2928. I get the message:
Your HD digital display device did not supply the required identification data (EDID)
I found this site from sunchip, they say its workin on win 8.1 http://www.sunchip-tech.com/prod_view.aspx?TypeId=12&Id=71&FId=t3:12:3
on the screen captures you can see the firmware versión is 6.0.0 rc3, Im looking for it now in order to test.
working on wp 8.1 witch the soft from ugoos.net/A3S
lokura said:
working on wp 8.1 witch the soft from ugoos.net/A3S
Click to expand...
Click to collapse
Thanks. I will try this too.
I was able to test ergotech v10 firmware. After extensive tests It only worked with WIDI 3.5.41.0 driver. None of the latest intel WIDI drivers worked.
I will try to install ugoos firnmware to see if it works with latest intel WiDi drivers.
Thanks.
Update
Ugos A3S does not work on my Lenovo T420 laptop and Widi Intel 4.3.4.0 (((( I get the same message as before.
Update:
No firmware works with latest WiDi driver.
The only WiDi driver which works with any rk2928 firmware (I tried 3 firmwares) is 3.5.41.0.
Hardware:
Intel i5-2520M VPro
Intel Processor Graphics 3000 HD
Intel Centrino Ultimate-N 6300 WiFi
Drivers
Graphic 9.17.10.4229
Wireless: 15.18.0.1
Software
WiDi application 3.5.41.0 installed 4.3.4.0 recommended (by intel widi update tool but is not working)..
The rk2928 firmware is miracast dlna airplay compatible, without any subtitle support over dlna.
For summary if you want widi support under windows 8 (8.1) then for me only intel widi 3.5.41.0 driver is working.
Also if you want dlna support under windows 8.1 it is possible. Samsung did produce a allshare excellent application which they have now discontinued, and is working like charm under windows 8.1.
Search google and download the Samsung allshare with version: 2.1.0.12031.10 (also called 2.1.0.12031_10)
Last point. For me ergotech V10 is the best firmware on Rk2928 dongle (as I have tested. My dongle used to display a connection name: lollipop)
ios9 airplay
Since ios9 update on iphone Airplay does not work on these dongles any more! and none of the firmware.
The latest firmware located on the ergo-tech website (ergotech.com.tw/tw/Download_detail.aspx?key= firmware v.11.0.0 and 3.0.0 here) claims that it supports ios9, but i have tried ios9.0.2 and 9.1 on these with iphone and it does not work.
Does anyone know a way of getting ios9 airplay to work?
There is a RK2928 dongle which claims to have ios9 support, the Visonicom RealCast VMD-RK156 realcastptv.com/tag/WiFi-display-dongle-Rockchip-RK2928) but i cannot find a firmware download for it.
Kabeern said:
Since ios9 update on iphone Airplay does not work on these dongles any more! and none of the firmware.
The latest firmware located on the ergo-tech website (ergotech.com.tw/tw/Download_detail.aspx?key= firmware v.11.0.0 and 3.0.0 here) claims that it supports ios9, but i have tried ios9.0.2 and 9.1 on these with iphone and it does not work.
Click to expand...
Click to collapse
Firmware 3.0 disables the wifi. So it does not work.
Firmware 11 has problem with the quality. Frames are skipping and video picture gets distorted.
I have tested firmware 11 extensively it is has flaws in video quality. Only ergotech firmware 10 works flawlessly.
I am back on firmware 10.
Tested hardware: miracast rk2928, Lenovo T420 with windows 8.1, intel HD 3000 graphics card, and widi 3.5.41.0 and intel centrino ultimate N-6300 and KODI (xbmc)..
Dear Friends I am in ingrate and desperate situation, I have a briked device m806 black one with antenna, I have Prepare IDB Fail no boot and i try 50 time to flash nothing,I make 2pin shortcut and I have blue square in RK BATCH TOOL 1.7 ,but when i push RESTORE button IDB fail erorr continous! Any advice please,I have a briked device!
alesul said:
Dear Friends I am in ingrate and desperate situation, I have a briked device m806 black one with antenna, I have Prepare IDB Fail no boot and i try 50 time to flash nothing,I make 2pin shortcut and I have blue square in RK BATCH TOOL 1.7 ,but when i push RESTORE button IDB fail erorr continous! Any advice please,I have a briked device!
Click to expand...
Click to collapse
If you are using Windows 8.1 or 10, try flashing your device with windows 7.
I try with 7 and nothing!
any help???
The device is Lenovo S860. Chipset Mediatek 6582, 1.3 Gh Quad-Core. Tried to port roms from many other models, the most of them work just fine, but i can't get to solve the sound problem. There is no sound at all. Someone said that it could be the specific sound drivers that this model has... And when i tried to copy all of lib files that respond for the audio, from stock to port rom, i get bootloop. What i think now, is that this model have a specific sound\audio drivers (maybe nvram). I wish i am wrong.
I'm not a rom maker, so any idea would be just great. Cheers.
Here's a link where are posted 2 roms whit android 4.2.2, and a KITKAT rom,:
http://forum.xda-developers.com/android/general/rom-4-2-2-lenovo-s860-miui-v5-aosp-t3047343
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
LaPxWaSs said:
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
Click to expand...
Click to collapse
I just flashed https://www.atvxperience.com/download/s912-v2ff-ddr-lpddr-ram-18-oct-2018/ successfully on mine.. Used the s912_LPDDR_atvXperience_v2FF.img file.. So far so good.. Flashed using USB to USB, and USB burning tool 2.1.6.. Android TV 7.1.2.. LPN1 32g/3g ddr4.. Only one I've found so far but was worried about hard brick so waiting till someone else confirmed it
Edit: Well, not sure now.. Seems every app that I've downloaded (Kodi, Chrome, VLC, the usual) minus showbox works fine but a lot of the apps that were originally on there (atvx apps) just crash out.. May have been a bad flash or I'm missing something simple. Will try reflashing later but it definitely doesn't brick it..
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
LaPxWaSs said:
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
Click to expand...
Click to collapse
It doesn't matter what the serial number is. All that matters is the architecture of the components of the ROM you're installing match up with the architecture of the box you have. In your case, any of the ROMs supporting the Amlogic s912 Octocore chipset should work on a Beehive GT1 Ultimate.
It sounds like a mistake you're making in the flashing process that is bricking your device, not the fault of the actual ROM.
Anyone know where to get Android 9.0 firmware for gt1_313M0 ? Is Android 6.0.1 really the final version of Android for this?!?!
Hello
Sorry I couldn't find a Q&A section, but I need to know about my box. I bought a MXQ PRO 4K as the title says from a local store (they didnt have much more information), it came with Nougat 7.1.,
I opened the box and said R329Q_V3.1 20180425. As i search in forums and aliexpress, I'm supposing is an Amlogic since they have a 2018 model with Nougat (couldn't find a rockchip with that spec), i can attach photos from an specific part if needed.
My questions are:
Where can i check the model to be sure?
If I'm correct, is it S905X or S905W and what ROMs can i install?
I mainly want to change ROM so i can use a better wifi remote app (i got used to the rockchip remote), can i install a ROM with the ehomediacenter as stock so i can control it with the RK remote even when is not a rockchip? Or what other options as wifi remote do i have? Since i tried cetusplay and teamviewer but they didn´t work as they were too buggy, neither is root to use remodroid.
Thanks in advance for the answers.
I own the Bqeel 2019 Android 8.1 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K Smart TV Box .
I have tried many custom roms and none of them seem to work in the correct manner. I am able to use the latest USB burning tool but lot of these custom roms will flop on me after the install process. I feel like there is something usually wrong with the WIFI side. if it is not a wifi problem, then it is the remote control.
I have yet to find a custom rom where I can load and then use the device the way it is suppose to be. I want the remote to work correctly. Keep in mind that I do have a direct Ethernet connection for this device.
I have contacted the original manufacturer hoping that they can send me the original default firmware.
Back to the topic, i am interested in the best, the latest, and the one the works the most for this device. All solutions have failed for me thus far.
ps: i will re try the following .img files that I was able to obtain from FreakTabs
- XTM_ATV_X96_4_4 (this one will not connect to the internet directly. it needs a cell phone or tablet, so i can transfer over the Wifi and Google Account settings. For some reason, this is impossible because it keeps asking for my WIFI password which i have entered many times in the device);
- Poison_S905x2_V2.0 (this one is easy to install but after the install, the GUI seems stuck. I can't open up any apps, and the weather icon is always spinning).
Again, i have tried maybe 5 different custom roms from freaktabs (i am sure they are posted here) and none of them seem to work.
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
alilous1000rr said:
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
Click to expand...
Click to collapse
I have the same problem.
I have tried many custom roms but nothing seems to work. Wifi and Bluetooth issues is a problem.
I too need STOCK firmware. I have extra device that is not been messed around with but i do not know how to make back up from stock rom. If i can make stock up rom with one app, i will do it ASAP and perhaps share it.
Edit: So I am able to obtain a back up of the stock firmware via Twrp from my second device, but it is not compatible with the other Bqeel system. All i see is the Bqeel Boot Logo.
I am still able to boot into recovery, and i can also install other custom roms (those custom roms stink).
I still need the orgiinal stock firmware in .img or i need a custom rom that actually works really great.
For those who want to purchase this device, you can but do not mess with custom roms. Just remove default apps and enjoy the default OS.
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
alilous1000rr said:
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
Click to expand...
Click to collapse
I did the same thing. They sent me the stock firmware. the device works great now! there is another hiccup though. For usb burning tool, you will need some license files. when you load the .img file in the program, it will not accept it. You need the license files (just transfer them in the directory in usb burning tool)
here is the link for license files and stock firmware.
https://mega.nz/#F!TvoShAAK!Jd0X15aoHWVdOf1rrYPc0g
I tried that firmware in my box and it freezes on logo!!!
any news for this device? I have tried many custom OS but none work due to missing drivers.
LooseEnd85 said:
I did the same thing. They sent me the stock firmware. the device works great now! there is another
Click to expand...
Click to collapse
What did you actually wrote into the message? I'm in touch with them since a few days but I cannot go over than "we can replace the unit"!
BTW, my Device Build Fingerprints: Amlogic/u211/u211:8.1.0/OPM1.171019.011/20190402:user/release-keys
Bqeel 2019 Android 9.0 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K UHD Smart TV Box
Yes... it should have android v9 but it's a v8.1... I found the error when the Amazon return window was already closed...
https://www.bqeel.net/download.html
There are firmwares from bqueel
Hi
Can somebody now tell me if firmware from bqeel.net works or not becuse I've seen a loot that say it's stuck at logo screen or it won't boot
Does it work or no?
so far the best custom ATV ported ROM I've found for this box is here: https://forum.freaktab.com/forum/tv...ionatv__bqeel_u214-y8_max_1000m_s905x3-test57
it is due for an update but works as is. I also have a SlimBox ROM that works for the Bqeel but I'll have to upload that to my Mega folder and share the link.
EDIT: nevermind my boxi s the Y8 Max this is asking for the Y4 Max,.