Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Yogendra Kher said:
Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Click to expand...
Click to collapse
Have you tested the rom?
Tested a bit, looks really great! (Installed the jan02 rom and after the fingerprint fix)
Use the stock Google camera and working good, taking pictures (sometimes out of flash, but avarage good), recording video in 4k without problem.
When make a call the phone go to "do not disturb", after the call get back to normal.
In the rom have minimal usefully options to mod, by the way we have a very good and simple AOSP experience.
Only used 30 minutes, but the battery only fall 3% (I know, no syncing a lot of apps, only installed and checked a few, but it's good)
Don't test the vulcan api, because don't install gapps, just only some apps for testing.
So thanks, I think this rom on my top 3!
Its in testing from what I can see.
I was using it all day yesterday and I must say its amazing. No cam or flashlight issue.
I had a 3-4 random reboots though. Hope that gets fixed soon.
Here are some screenshots
Tested it. Have to say its a great rom, probably the best for me! Goodix fp is working without any patches. Camera and flashlight work, but still buggy same like other nougat roms.
Not sure whether vulkan api is working.
adizz4 said:
Its in testing from what I can see.
I was using it all day yesterday and I must say its amazing. No cam or flashlight issue.
I had a 3-4 random reboots though. Hope that gets fixed soon.
Here are some screenshots
Click to expand...
Click to collapse
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
ASDFking said:
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
Click to expand...
Click to collapse
http://xyyx-dev.ru/nitrogen-os/testing/nougat_7.1/kenzo/
ASDFking said:
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
Click to expand...
Click to collapse
There's no official thread at the moment AFAIK. I'm sure it'll be up once the testing is done.
But the test builds are mentioned above in case you want to give it a try.
irul.monster said:
Tested it. Have to say its a great rom, probably the best for me! Goodix fp is working without any patches. Camera and flashlight work, but still buggy same like other nougat roms.
Not sure whether vulkan api is working.
Click to expand...
Click to collapse
What about volte. And can you click hdr in google camera. Someother changes from cm.
No other changes...pretty good, but not as lineage currently
Yogendra Kher said:
Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Click to expand...
Click to collapse
I think this thread should be in kenzo Roms section
http://xyyx-dev.ru/nitrogen-os/testing/nougat_7.1/kenzo/
where is the officialy forum for kenzo on to rom nitrogen os
Cant flash SuperSu 2.79..??? is the rom prerooted..??
$lim $hady said:
Cant flash SuperSu 2.79..??? is the rom prerooted..??
Click to expand...
Click to collapse
yes
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Minions007 said:
yes
Click to expand...
Click to collapse
There is no root option under developer options.. and i wont get the supersu icon when i flash the supersu 2.79 zip
$lim $hady said:
There is no root option under developer options.. and i wont get the supersu icon when i flash the supersu 2.79 zip
Click to expand...
Click to collapse
I am using the latest build and it has phh's superuser.
There is no need to flash supersu 2.79 zip root is avilable already
manudhomra said:
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Click to expand...
Click to collapse
everything working fine camera video volte out of the box xender(for file sharing) substratum battery life very good . I used it since 4 days faced not a single reboot. very stable.
sometime flashlight from toggle not working and with camera also.
manudhomra said:
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Click to expand...
Click to collapse
custom header are available,have not seen them in any nougat except Nitrogen os uptil now but no animation are available :good:
Related
This thread can be used for tracking the progress of CM14 for the Mt2?
Note:
https://plus.google.com/u/0/photos/photo/109932426055289104206/6329128826640065154?icm=false
Link is not opening
plus.google.com/109932426055289104206
Nougat for Ascend Mate 2 MTL203
So this post caught my eye... Is someone working on Android 7.0 for the Ascend Mate 2 or is it already out there?
SHM, a dev who brought us TWRP and a few 6.0 ROMs, is working on 7.0. Understandably, he doesn't like people asking for ETA's so he'd prefer us not to bug him.
Also, since CM officially supports our phone, won't we be getting an official CM14 as well?
shm quit development on this but released the sources
https://bitbucket.org/S-H-M/android_device_huawei_mt2
https://bitbucket.org/S-H-M/android_kernel_huawei_msm8928
Sadly
http://forum.xda-developers.com/showpost.php?p=69194744&postcount=234
ScoobSTi said:
SHM, a dev who brought us TWRP and a few 6.0 ROMs, is working on 7.0. Understandably, he doesn't like people asking for ETA's so he'd prefer us not to bug him.
Also, since CM officially supports our phone, won't we be getting an official CM14 as well?
Click to expand...
Click to collapse
i think that would be after someone submits a working build.
Unofficial CM14.1
bgcngm said:
https://android.cmphys.com/cyanogenmod-mt2/
Click to expand...
Click to collapse
MT2-User said:
Unofficial CM14.1
Click to expand...
Click to collapse
Stock Camera works. Both front and rear ones. Gallery app works.
DT2W also works!
Clean flash plus Open GApps nano package as shown.
Battery life: with profiles settings as Performance and Tasker running in the foreground.
MT2-User said:
Battery life: with profiles settings as Performance and Tasker running in the foreground.
Click to expand...
Click to collapse
Good to see the great community behind this phone is still developing... Thanks guys... May you have a Happy MT2 New Year...
MT2-User said:
Battery life: with profiles settings as Performance and Tasker running in the foreground.
Click to expand...
Click to collapse
@MT2-User what's your feel for this beta rom is it worth a try, how easy is it to go back to your cm13 back, and this new version of twrp how does it work???
Thanks for any info you can share...
nate5711 said:
@MT2-User what's your feel for this beta rom is it worth a try, how easy is it to go back to your cm13 back, and this new version of twrp how does it work???
Thanks for any info you can share...
Click to expand...
Click to collapse
@nate5711: I think this CM14.1 runs more smooth than CM13 (official). It hasn't crashed yet; previously CM13 rebooted occasionally. The battery life is very nice also: 9-10 hours SOT, similar to CM13.
I have been using TWRP by Matt (this CM14.1 Developer) for a while, so I didn't see any problem with it (the previous version is 3.0.M5-0 released on July 19; https://android.cmphys.com/twrp-mt2/). The only thing is TimeService which led to inaccurate time in TWRP, but I always named Nandroid backup myself which is much shorter while with more information. It has been fixed as Matt stated:good:
I did make a Nandroid backup of CM13 using TWRP-3.0.M5.0 and I am sure there is no problem to switch between this CM14.1 and CM13 without loss of data. I tried both clean and dirty flash of CM14.1 (over CM13), and currently I've been running the dirty-flashed one flawlessly. I tried switch between CM14.1 and CM13 with TWRP and there's no problem at all.
Sure, as I mentioned earlier, LiveDisplay night mode doesn't work. There's no CMTE either. Otherwise everything is good on my end.
Thanks to Matt for his wonderful job! :good::good::good:
BTW, Matt has his CM13-Dec 26 nightly available to us also and he said the Camera (CM13) has been fixed. TBH, I haven't tried his CM13-20161226 yet since I am very satisfied with his CM14.1-20161225.
Dirty flashed runs fine also had to re flash gapps to get it to fully boot but other then the missing theme engine it seems way smoother then the last good build of cm 13 great work matt and thanks for keeping this phone alive
Sent from my Ascend Mate 2 using Tapatalk
hopkins31 said:
Dirty flashed runs fine also had to re flash gapps to get it to fully boot but other then the missing theme engine it seems way smoother then the last good build of cm 13 great work matt and thanks for keeping this phone alive
Click to expand...
Click to collapse
Yes, arm 7.1 GApps required even for dirty flash over CM13.
Thanks for the helpful info, dl the rom and I'm very much enjoying it..
Thank you for providing the latest build. I have installed it and seems to be working fine. Need to use it for a few days to cycle the battery to know how good is the backup.
Thank You so much for the update so far is very smooth. Is anyone else having the camera randomly popping up during a phone call? I have tried to download gapps again and reflashed still having the issue. Am i missing something in the settings?
divhandyman said:
Thank You so much for the update so far is very smooth. Is anyone else having the camera randomly popping up during a phone call? I have tried to download gapps again and reflashed still having the issue. Am i missing something in the settings?
Click to expand...
Click to collapse
Disable the tap to wake setting under display will stop the camera popping up.
Hello, XDA netizens, I have some marvelous news,
I'd like to bring to you CM 13, completely stable with Xperia system UI.
[BOLD] **I have not made this ROM all praise goes to the developer of this ROM **[/BOLD]
[BOLD] I am not responsible if anything goes wrong. [/BOLD]
This custom rom is stable for using as a daily driver. No bugs have yet been reported.
Fingerprint is working fine.
[BOLD] Requirements [/BOLD]
1. Unlocked bootloader.
2. TWRP installed.
[BOLD] Installation guide:[/BOLD]
1. Place the downloaded rom in the external storage (ext sd/pendrive).
2. Wipe system, data, cache, dalvik.
3. Install ROM.
4. Flash gapps along with the rom. (NOT AFTER)
CM 13 is known to cause issues because of that.
Do not flash SuperSU.
To enable root, go to developer options, and enable it for apps/adb. (according to your requirement)
DISCLAIMER:
The first boot takes time, DO NOT, panic and try to reboot.
[BOLD] Download link:[/BOLD]
https://drive.google.com/file/d/0ByqgD9tfc1SpTTVERUk4Q0V3Rlk/view
Bugs:
Haven't encountered any yet, even though haven't tested it for long.
VoLTE is working.
Related threads:
http://en.miui.com/thread-410907-1-1.html (MIUI thread)
https://goo.gl/OaNVdP (CM Recovery)
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Stable
PS: This was pulled from the MIUI forum, there too, the developer wasn't mentioned, if someone knows the developer, do pm me, I'll happily mention him.
If updates are provided, I'll update the thread.
Hope I've made a few people happy
Some screenshots: B)
Enjoy!
Can u please provide the original page/post where u got this ROM?
I mean the page of original developer
Thnx
I'm currently using it as a daily driver for a few days right now. Just my two words:
- everything works (calls, sms, mms, 2g, 3g, lte, wifi, bluetooth),
- video recording works fine but you need to use Footej Camera (like on all other ports). The only difference is that here it's much faster,
- can't find options for fingerprint, so....
- I had to flash SuperSu. Enabling root in development settings gives nothing.
hannyso said:
Can u please provide the original page/post where u got this ROM?
I mean the page of original developer
Thnx
Click to expand...
Click to collapse
i think its from 4pda from user loner or O_dinochka
hannyso said:
Can u please provide the original page/post where u got this ROM?
I mean the page of original developer
Thnx
Click to expand...
Click to collapse
Yes i did provide.
The MIUI forum. The source website wasn't mentioned.
jonny908 said:
I'm currently using it as a daily driver for a few days right now. Just my two words:
- everything works (calls, sms, mms, 2g, 3g, lte, wifi, bluetooth),
- video recording works fine but you need to use Footej Camera (like on all other ports). The only difference is that here it's much faster,
- can't find options for fingerprint, so....
- I had to flash SuperSu. Enabling root in development settings gives nothing.
Click to expand...
Click to collapse
That's strange, dev options worked for me just fine.
And superSU was reported to be causing numerous issues. Anyway, two more mentions of this, and I'll change the OP.
Thanks for the feedback.
Almost stable! Using it since a day..
No major bugs at all! CM Root causing problems so using SuperSU and Xposed Modules working too...
The only thing that bothers me is no VoLTE
Hows the battery life?
hannyso said:
Hows the battery life?
Click to expand...
Click to collapse
Nearly 3 days on one charge, moderate use. Youtube, Mx player, lots of internet, a few sms & calls.
EDIT: SoT is about 9 hours and 15 min. It was 12% left before connected to the charger.
jonny908 said:
Nearly 3 days on one charge, moderate use. Youtube, Mx player, lots of internet, a few sms & calls.
Click to expand...
Click to collapse
What are the bugs u r facing?
hannyso said:
What are the bugs u r facing?
Click to expand...
Click to collapse
None so far ? but can't find fingerprint settings, I guess it needs an additional apk for that.
jonny908 said:
None so far ? but can't find fingerprint settings, I guess it needs an additional apk for that.
Click to expand...
Click to collapse
Does that mean fingerprint isn't working as lock screen? Is that correct?
I don't know. We should ask @WickedCool19
jonny908 said:
I don't know. We should ask @WickedCool19
Click to expand...
Click to collapse
It doesn't have a specific menu for it, but I believe it does contain the fingerprint recognition APIs, do try it with supported app locks, like smart apps lock and so on.
Can someone please show me their APN settings and baseband version?
Thanks
Fingerprint works. I setup on start.
Wysłane z mojego Redmi 3S przy użyciu Tapatalka
StaticBlaze said:
Almost stable! Using it since a day..
No major bugs at all! CM Root causing problems so using SuperSU and Xposed Modules working too...
The only thing that bothers me is no VoLTE
Click to expand...
Click to collapse
Strange , VoLTE fine for me . Xposed modules activation causing bootloops .
gamerboy_010 said:
Strange , VoLTE fine for me . Xposed modules activation causing bootloops .
Click to expand...
Click to collapse
I don't have VoLTE working
But, u gotta patch for Xposed to work
StaticBlaze said:
I don't have VoLTE working
But, u gotta patch for Xposed to work
Click to expand...
Click to collapse
Patch ? Procedure or link to patch plz ? For VoLTE try changeing apn .
gamerboy_010 said:
Strange , VoLTE fine for me . Xposed modules activation causing bootloops .
Click to expand...
Click to collapse
http://forum.xda-developers.com/xia...anogenmod-13-0-redmi-3s-t3496187/post69680106
Here is the patch zip. Just flash it and then you can enable any module and it won't boot loop.
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
new build the problem detection card corrected sim recognizes them
the bad the camera does not work and is slow.
Download link: https://github.com/EnesSastim/Downl...A-2018-09-20/PixelExperienceP-arm64-aonly.zip
sgt_peppers said:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
The sim card it's not working in my case ..any suggestion?
Xiaby said:
The sim card it's not working in my case ..any suggestion?
Click to expand...
Click to collapse
Not in my particular case. Maybe flashing magisk?
sgt_peppers said:
Not in my particular case. Maybe flashing magisk?
Click to expand...
Click to collapse
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Xiaby said:
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Click to expand...
Click to collapse
works perfect just that you notice the temperature is somewhat high at times
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
Thank you trying it later
Xiaby said:
Thank you trying it later
Click to expand...
Click to collapse
Restart my device and now the SIM does not recognize me
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
could ytou please share a link to the latest firmware? I cannot seem to find it on this site?
CAn i just use TWRP?
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Andrikkos said:
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Click to expand...
Click to collapse
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
The_real_hati said:
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
Click to expand...
Click to collapse
Can you share the firmware link ?
Andrikkos said:
Can you share the firmware link ?
Click to expand...
Click to collapse
https://xiaomi.eu/community/
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
yes finally lol. Thanks a bunch i could not find the firmware anywhere
---------- Post added at 06:44 AM ---------- Previous post was at 06:38 AM ----------
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
Mate? No firmware/ Just another site link to get lost in? :-\
Bryceicle1971 said:
Mate? No firmware/ Just another site link to get lost in? :-\
Click to expand...
Click to collapse
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
The_real_hati said:
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
Click to expand...
Click to collapse
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Bryceicle1971 said:
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Click to expand...
Click to collapse
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
https://androidfilehost.com/?fid=1322778262903998408
The_real_hati said:
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
Click to expand...
Click to collapse
Whatever. Your being obnoxious. Given up on Android P. Overheats an RIL issues. Every time. And you just proved my point
sgt_peppers said:
Restart my device and now the SIM does not recognize me
Click to expand...
Click to collapse
Did yuo find any solution?
IMPORTANT: I'm NOT responsible for this. This is just to warn those users who are unaware of this port, which I find very useful. The original author is @AEonAX.
This port is to take MIUI camera to AOSP as a Magisk Module, originally for Poco F1, but now with full support for Mi 8.
Furthermore it has a pretty active Telegram Group: https://t.me/ANXMiuiCameraChat
Original XDA post: https://forum.xda-developers.com/poco-f1/themes/port-t3879357
Instructions for Use:
Download the Zip from https://camera.aeonax.com/#downloads
Install the Zip via Magisk if you have it, Install via TWRP only if you don't have Magisk
Keep a note of the release you will be using, for issue discussion etc.
Start Using
Uninstall via Magisk, or flash same again in TWRP to uninstall
Make sure to join the Telegram Group Chat for this Project for updates and issue resolution. Updates on XDA maybe delayed.
desvariando said:
IMPORTANT: I'm NOT responsible for this. This is just to warn does users who are unaware of this port, which I find very useful. The original author is @AEonAX.
This port is to take MIUI camera to AOSP as a Magisk Module, originally for Poco F1, but now with full support for Mi 8.
Furthermore it has a pretty active Telegram Group: https://t.me/ANXMiuiCameraChat
Original XDA post: https://forum.xda-developers.com/poco-f1/themes/port-t3879357
Instructions for Use:
Download the Magisk Zip from https://github.com/XEonAX/ANXMiuiCamera10/tree/master/out/ANXCameraMagisk.zip
Install the Magisk Zip
Grant All Permissions
Grant Usage Access Permission.
Generally From Settings>Apps>Advanced>Special App Access>Usage Access>Camera>Allowed
Start Using
Make sure to join the Telegram Group Chat for this Project for updates and issue resolution. Updates on XDA maybe delayed.
Click to expand...
Click to collapse
@desvariando First of all thanks for the post. Please update the link to https://github.com/XEonAX/ANXMiuiCamera10/raw/dipper/out/ANXCameraMagisk.zip which is a proper dipper port, currently linked version is for beryllium, and might not have all the dipper specific features. This link will always point to the latest version available at the time of downloading, for older versions you can ask in the telegram group.
Best Regards
AEonAX said:
@desvariando First of all thanks for the post. Please update the link to https://github.com/XEonAX/ANXMiuiCamera10/raw/dipper/out/ANXCameraMagisk.zip which is a proper dipper port, currently linked version is for beryllium, and might not have all the dipper specific features. This link will always point to the latest version available at the time of downloading, for older versions you can ask in the telegram group.
Best Regards
Click to expand...
Click to collapse
Thank you. Link updated.
AEonAX said:
@desvariando First of all thanks for the post. Please update the link to https://github.com/XEonAX/ANXMiuiCamera10/raw/dipper/out/ANXCameraMagisk.zip which is a proper dipper port, currently linked version is for beryllium, and might not have all the dipper specific features. This link will always point to the latest version available at the time of downloading, for older versions you can ask in the telegram group.
Best Regards
Click to expand...
Click to collapse
The telephoto lens seems not to be working in this version, while it strangely did with the one of the wrong link. If I cover it with my finger and switch between 1x and 2x I can still see everything through the viewfinder.
Btw, GREAT work, thank you a lot!
Tested on HAVOC, and it is working.
I have found one bug: selfie camera resolution is 1920x1440 while orginal on MIUI rom is 5184x3880.
Everything else is working, realy nice work.
Sorry, i didn't understand what this does. There is some terms i dont know what means. Could someone explain to me better?
Gustavo Sz said:
Sorry, i didn't understand what this does. There is some terms i dont know what means. Could someone explain to me better?
Click to expand...
Click to collapse
Simple. It allows you to use the stock MIUI Camera in a different ROM which is not MIUI.
Anyone tested it on Syberia OS?
catalindobre said:
Anyone tested it on Syberia OS?
Click to expand...
Click to collapse
Tested and working. I'm currently on Syberia.
desvariando said:
Tested and working. I'm currently on Syberia.
Click to expand...
Click to collapse
Will also try this combo today.
catalindobre said:
Will also try this combo today.
Click to expand...
Click to collapse
I'm on Syberia too and it works. I don't test it depth. I use GCam much more than this.
NICE
Testet on BAIKAL OS and it works nice - thanks a lot !
Doesn't work on LineageOS.
Enviado de meu MI 8 usando o Tapatalk
desvariando said:
IMPORTANT: I'm NOT responsible for this. This is just to warn those users who are unaware of this port, which I find very useful. The original author is @AEonAX.
This port is to take MIUI camera to AOSP as a Magisk Module, originally for Poco F1, but now with full support for Mi 8.
Furthermore it has a pretty active Telegram Group: https://t.me/ANXMiuiCameraChat
Original XDA post: https://forum.xda-developers.com/poco-f1/themes/port-t3879357
Instructions for Use:
Download the Magisk Zip from https://github.com/XEonAX/ANXMiuiCamera10/raw/dipper/out/ANXCameraMagisk.zip (this is the dipper specific module)
Install the Magisk Zip
Grant All Permissions
Grant Usage Access Permission.
Generally From Settings>Apps>Advanced>Special App Access>Usage Access>Camera>Allowed
Start Using
Make sure to join the Telegram Group Chat for this Project for updates and issue resolution. Updates on XDA maybe delayed.
Click to expand...
Click to collapse
Please update the download link to https://github.com/XEonAX/ANXCamera10/releases
Users should download dipper specific build attached under assets.
AEonAX said:
Please update the download link to https://github.com/XEonAX/ANXCamera10/releases
Users should download dipper specific build attached under assets.
Click to expand...
Click to collapse
Thank you.
Updated that as well as removed the permissions, since they are not needed anymore.
Guys does selfie works for you?Im on havoc os and when i try to take selfie image stuck and i must close app...Also after some time camera doesnt work at all.
I just get black image and i must disable app to work again..
johnnyman25 said:
Guys does selfie works for you?Im on havoc os and when i try to take selfie image stuck and i must close app...Also after some time camera doesnt work at all.
I just get black image and i must disable app to work again..
Click to expand...
Click to collapse
It works for me with no problems.
desvariando said:
It works for me with no problems.
Click to expand...
Click to collapse
Selfie works and takes photos normally?Which rom u have my friend?
johnnyman25 said:
Selfie works and takes photos normally?Which rom u have my friend?
Click to expand...
Click to collapse
I had Havoc and worked on that.
Now I'm on Syberia.
Try to update your FW, maybe is related to that.
desvariando said:
I had Havoc and worked on that.
Now I'm on Syberia.
Try to update your FW, maybe is related to that.
Click to expand...
Click to collapse
Before havoc i installed latest global beta 9.1.24..
Since there is no official thread, we can discuss about it here. I flashed Mokee rom nightly and so far it feels good. Added 2 fingerprints and it works pretty good, better than Havoc and Pixel Rom. Also the phone doesnt reboot when connecting to PC with USB.
Anyone else using this Rom?
https://download.mokeedev.com/raphael.html
I am using it, works excellent, only two things missing are 4k recording (which is available on Beast rom) and dt2w which is broken on all custom ROMs. I would recommend it. I am using it with 9.7.10 vendor and firmware
ermacwins said:
Since there is no official thread, we can discuss about it here. I flashed Mokee rom nightly and so far it feels good. Added 2 fingerprints and it works pretty good, better than Havoc and Pixel Rom. Also the phone doesnt reboot when connecting to PC with USB.
Anyone else using this Rom?
https://download.mokeedev.com/raphael.html
Click to expand...
Click to collapse
How's the battery life going?
dzontra83 said:
I am using it, works excellent, only two things missing are 4k recording (which is available on Beast rom) and dt2w which is broken on all custom ROMs. I would recommend it. I am using it with 9.7.10 vendor and firmware
Click to expand...
Click to collapse
Beast ROM? Where did you get that from?
ermacwins said:
Beast ROM? Where did you get that from?
Click to expand...
Click to collapse
They have official telegram group:
https://www.google.com/url?sa=t&sou...gwAHoECAIQAQ&usg=AOvVaw3au8EPFANb2C3Ued4sts7N
You have test builds, and official ones. I didn't try latest ones, but for me mokee was more stable
ermacwins said:
Since there is no official thread, we can discuss about it here. I flashed Mokee rom nightly and so far it feels good. Added 2 fingerprints and it works pretty good, better than Havoc and Pixel Rom. Also the phone doesnt reboot when connecting to PC with USB.
Anyone else using this Rom?
https://download.mokeedev.com/raphael.html
Click to expand...
Click to collapse
dzontra83 said:
I am using it, works excellent, only two things missing are 4k recording (which is available on Beast rom) and dt2w which is broken on all custom ROMs. I would recommend it. I am using it with 9.7.10 vendor and firmware
Click to expand...
Click to collapse
Hey all. I flashed mokee just now. Everything works perfectly until I played multimedia. It won't let me play audio, video, YouTube, make calls or do video chat. I was using Eu rom 8.9.1 prior to flashing mokee. I wiped data, dalvic, and cache in twrp them flashed the rom. Did I miss any step?
melmarPH said:
Hey all. I flashed mokee just now. Everything works perfectly until I played multimedia. It won't let me play audio, video, YouTube, make calls or do video chat. I was using Eu rom 8.9.1 prior to flashing mokee. I wiped data, dalvic, and cache in twrp them flashed the rom. Did I miss any step?
Click to expand...
Click to collapse
You need 9.7.10 as base. Mokee and LOS is built and maintained by the same guy.
ermacwins said:
Since there is no official thread, we can discuss about it here. I flashed Mokee rom nightly and so far it feels good. Added 2 fingerprints and it works pretty good, better than Havoc and Pixel Rom. Also the phone doesnt reboot when connecting to PC with USB.
Anyone else using this Rom?
https://download.mokeedev.com/raphael.html
Click to expand...
Click to collapse
Does it have deep sleep problem if we use Fingerprint Lock. On RR rom if we enable FP lock than the device doesn't wakes and we have to restart manually via hardkeys
pritish sahoo said:
Does it have deep sleep problem if we use Fingerprint Lock. On RR rom if we enable FP lock than the device doesn't wakes and we have to restart manually via hardkeys
Click to expand...
Click to collapse
Im trying a different rom, OxygenOS gsi. How do you replicate the sleep bug?
pritish sahoo said:
Does it have deep sleep problem if we use Fingerprint Lock. On RR rom if we enable FP lock than the device doesn't wakes and we have to restart manually via hardkeys
Click to expand...
Click to collapse
Until my last try 0806 build, the issue was still there.
This ROM is the only one AOSP based and without deep issue.
Im using Mokee Rom, does anyone know where i can find the changelog?
prorcracer87 said:
Im using Mokee Rom, does anyone know where i can find the changelog?
Click to expand...
Click to collapse
At their site. At the left tab above the device list
Someone still use this rom?
Kollachi said:
Someone still use this rom?
Click to expand...
Click to collapse
I use it with Kernel Immersive LOS version
Sent from my Asus ZenFone 3 Deluxe using XDA Labs
tecnicopascoal said:
I use it with Kernel Immersive LOS version
Click to expand...
Click to collapse
The post you answered is 5 months old now, lol.
Look here is the rom-thread now.
https://forum.xda-developers.com/k20-pro/development/rom-mookeos-t4050561/page1