Hey guys
I got really annoyed by not being able to delete photos in Google Images, so I decided to root and fix it.
Now, after having my data wiped in the process of opening the bootloader (had to register on LG dev, etc), I am stuck on the last step - I can't get into TWRP to flash supersu.
I flashed it with the fastboot flash recovery command, but then after doing fastboot reboot, and then using adb reboot recovery, I get into the stock recovery.
I found two fixes, none of which work:
1. after flashing TWRP, turn off, then use HW buttons to get into recovery. On the fifth try, I got to the "erase all data" screen, which allegedly should be ignored. So I ignored it, and it erased all my data again
2. use fastboot boot command to boot TWRP directly. Doesn't work, I get an "unknown command" error.
Any other ideas how can I proceed to rooting my V10 (H960A) would be much appreciated.
Are you sure that you are using the command right for flashing the TWRP?? That should be something like: fastboot flash recovery recovery.img
recovery.img --->twrp
Also you get information whether flashing the recovery was successfull or not. Read the output in the coomand window carefully. Maybe you can post a screenshot or at least the returned message.
Here's a screenshot after going through the process again:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
flashing the recovery seems ok. Afterwards it seems vitally important that you switch off your phone, otherwise the recovery will be replaced by the stock revovery. Only after flashing SuperSu TWRP will be persistent.
Quote from the TWRP install instructions:
As on Marshmallow some fastboot commands are not working and LG is restoring recovery on every boot (so you cant use "adb reboot recovery" right now) you need to use one trick.
DO NOT REBOOT YOUR PHONE.
When still in fastboot from step 3 you need to turn off your phone completely. You can do that by holding power button or if that is not working take the battery out.
Now (put the battery in) and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again. You should see a screen which is asking you if you want to factory reset your phone. Don't worry - if you made everything correctly it should not wipe your phone.
Use volume and power buttons to choose YES (twice) - and you should see a TWRP screen (after a while)
WARNING: IF YOU REBOOTED YOUR PHONE AFTER FLASHING RECOVERY THIS STEP WILL REALLY ERASE ALL DATA. You need to flash recovery again (step 3)
Click to expand...
Click to collapse
Also you tried to boot with the recovery image which is also not supported by LG.
I suggest you just flash TWRP again and do not try to reboot into recovery via fastboot command. Instead remove the battery right after flashing TWRP, wait a couple of seconds and put it in again. Then boot into recovery using the button combination decribed above.
I followed these steps three times with my phone (after updating the firmware) and it worked fine every time.
I tried it again and now I got through the whole rooting process.
Now I got stuck on the "Your device can't be checked for corruption" screen, which has been showing up on every boot since unlocking bootloader between the two animations, but now it's been there for a few minutes already.
Now what do I do?
****e, looks like I deleted my OS, while trying to wipe stuff in order to get through the boot freeze.
EDIT: I reinstalled stock ROM. Any ideas why it got stuck after rooting?
EDIT2: Installed the wrong ROM (some Tmobile branded version). Are there any custom ROMs for H960A running MM?
Hi,
no there are currently no Custom Roms for the H960A.
BTW: You will also get the "Your device can't be checked for corruption" screen with the correct ROM version. This is just a reminder popping up after bootloader unlock. After a couple of seconds the normal boot sequence will start.
I know, but the software version number now says H90110c
Also it's running 5.1.1. I can handle not having Nougat, but not back to 5.1 again...
I am searching for a way to get back my stock MM ROM, but there are apparently no ZIP or even kdz versions that work on the internet
Any help would be appreciated.
Yes, there are Android 6 kdz files for the H960A available, even in this forum:
http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348
Make sure you select the correct H960A version as there are two available: Europe and United Arab Emirates.
If the download does not work when you click on a link click it with the right mouse button select "copy link" (or similar, exact text depends on browser). Then open a new browser tab/windows and paste the link in the address field. Now the download should work.
You need to flash the kdz with LGUP.
In your case I would recommend the "REFURBISH" option in LGUP as it makes sure that the phone is completely wiped and reset.
As the refurbish option normally only allows tot-files to be selected you need to use a little trick. The below instructions are quoted from the LGUP thread (http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803). Please look there if you need further information. You don't need to do the changes in the prop-file described at he beginning of the instructions. If you have not installed LGUP yet you'll find it in that thread as well.
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer.
Select the option "update" (if not already selected).
FILE PATH: point it towards the MM KDZ file.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
Click to expand...
Click to collapse
Unfortunately, the downloads in that forum don't work, even after copy/pasting the link into Chrome, FF, even MSE...
I got two different kdz files from somewhere on the internet:
Europe H960A20a_00_0316
H960A10c_00_1224
None of them work. I got an error during the initialization phase saying the kdz file is incorrect.
Maybe it's because it says H90110c under version (as I said, I managed to install the wrong ROM after wiping everything)?
This is a nightmare. Please help
Related
Hi Guys,
My Samsung Galaxy S2 SGH-I777 is soft bricked. It only goes into download mode when the usb cable is plugged and the (vol up down + power) buttons are pressed. When the cable is unplugged, it doesn't turn on. I've tried the following steps by creepyncrawly at last but couldn't get it to a working state.
1)Go to this post and download the Tar version of Siyah 2.6.14 Kernel. Flash it in the PDA slot without ticking Re-Partitioning. If you get a pass, it won't boot, so turn the phone off and then back to download mode and...
2) Flash the full stock Gingerbread distribution from the Download Repository, I777UCKH7 including the bootloaders and everything, in the PDA slot.
3) If you get a pass here, then the phone might boot, or you might have to boot into recovery first and perform a wipe data/factory reset. If you're able to boot the phone, then you are back in business, and can flash whatever firmware you want.
If it is not, then:
4) Download the SBL Bootloader from the Download Repository. Flash it as PDA in ODIN, without ticking Re-Partitioning.
5) Flash the Kernel, as in step 1.
6) Flash the full stock Gingerbread distribution, as in step 2.
Even before that I tried many other things from various forum posts.
Please help me to get this working again..
Thanks so much
Okay. The above are steps to overcome nand read-write corruption in the emmc memory. However, these steps should result in a working system installation under almost any circumstances. However, if there is emmc memory failure, not corruption but actual damaged memory, then it will be unrecoverable. Without additional information, it is impossible to say what the actual problem is.
So, since you say the above sequence fails, I need to know exact details of what happens when you follow the above instructions. I need a step by step description, what succeeds, what fails and in which step, and any text from the messages section of Odin. And anything else you can think to add that might be helpful.
Thanks so much for the reply.
The flashing process works fine, no error messages from odin or from the phone,
But
When it comes to the Android System Recovery Screen, I did the factory reset. After it reboots, load the Android System Recovery Screen again.
Then when I select the reboot option, phone reboots to the Android System Recovery Screen until the cable is plugged in, when it is removed, it doesn't reboot anymore.
In the Log there's a message that is suspicious, it says
"--Applying Multi-CSC...
Installing Multi-CSC
Can't access to /system/csc/ATT/system/
successfully applied multi-CSC"
And once i had something weird, when I flashed the secondary bootloader (step 4), phone seemed to load one step further than the samsung screen when onto the AT&T screen, but then suddenly it turned off and heard a few 'tik', 'tik' sounds.
Thanks so much for all the support, looking forward to an answer. Will upload some screens soon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can safely ignore the message "Can't access to '/system/csc/ATT/system/'." This message is often present when the flash is fully successful, and at other times.
The telling message, however, is "Deleting Cryption Meta Data." This seems to indicate nand read/write corruption, and has been successfully repaired in at least a few cases that I am aware of, by using the above sequence.
So, I would suggest that you try going through the sequence again. It is a three step process, really.
1) Flash sbl.tar only using Odin. Tick F Reset Time, but untick Auto Reboot, so that the phone will not attempt to boot into system.
2) Flash the tar version of the Siyah 2.6.14 Kernel using Odin, having returned to download mode without trying to boot into system. Again tick F Reset Time, but untick Auto Reboot, so that the phone will not attempt to boot into system.
3) Finally, flash the stock Gingerbread SGH-I777UCKH7 tar using Odin, and this time tick Auto Reboot as well as F Reset Time.
If it doesn't boot into the system, you may still need to enter recovery and perform a wipe data/factory reset again.
Keep good notes about what happens each step along the way so that if it is not successful, we may get some clues.
Thanks so much for the help you're doing but unfortunately the results are the same as before
Same messages, for example "Deleting Cryption Meta Data" is always on top
Please give me another option.
BTW, I had to press Vol up + Vol down + Power button to get into download mode after the sbl is flashed because it wasn't restarting as per the option we set.
Also phone seemed to load one step further when I flashed the I777UCKH7 and the samsung screen went onto the AT&T screen, but then suddenly it turned off and heard a few 'tik', 'tik' sounds. weird !!!
Thanks so much
I don't have any additional "tricks up my sleeve."
It is possible that the emmc flash memory has become damaged, but this is far from conclusive. It is possible for the emmc flash memory to be damaged without the phone being completely hard bricked. In order to find out conclusively, you would need to send it to someone with equipment capable of testing the memory module.
From my observations of people who have posted about a problem similar to yours, including "deleting cryption meta data," there have been some cases where the phone was recovered, and some cases where it was not.
It is possible that it is a connection problem between the phone and the computer. I know of one case where a person kept trying to flash, and eventually the flash worked, but I don't remember if the problem he had was similar to your or not.
I also remember one case where a person got his phone going after using the pit file from the Download Repository, along with the Gingerbread tar. In that case, he had to flash the pit with the Gingerbread tar, and still wouldn't boot, but after flashing the Gingerbread tar again without the pit, it booted. Again, I don't remember is his problem was similar to yours.
Sorry I can't be of more help.
Thanks so much for trying to help me here. Anyways I'm trying to buy a new phone, I've been using this phone for 3.5 years and I think its time is up now. Thanks again ...
Please help me
Hope your phone can boot into fastboot mode.
Download and Flash the TeamSpain 15S recovery from here
Boot into fastboot mode. Turn the Phone off -> Power on using (Power button + Volume down). Connect to your PC and make sure Fastboot drivers are installed.
Pass this command fastboot flash recovery TWRP5.8TeaMSpaiNRevolution_15s.img assuming the recovery img file and fastboot are in the same directory.
Boot into recovery by pressing (Power + Volume Up) button combo. If you get Blue Led of Death, keep Power + Volume Up buttons pressed till phone boots into recovery.
Download TeamSpain Revolution 15s EUI ROM from here
In TWRP, Adb sideload the above rom.
Thank you I will try
Thank you I will try. please help me.
Can you tell me any detail.
Can you tell me any detail.
jakkapongjames said:
Can you tell me any detail.
Click to expand...
Click to collapse
What detail?
I change rom from model china x820 to indian x821. I try install TWRP but my devices just booted to a black screen with the blue led. I can try many method but doesn't work. it's show only quadcomm driver. what should i do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi my le max 821 is also soft bricked can any one help please? It is going to fast boot mode, i have tried installing TWRP. It has shown that twrp has been installed, but when i tried to get into recovery it is showing a flashing blue screen and immediately the entire screen is going dark. Please some one guide me. Thanks in advance.
AJJU1972 said:
Hi my le max 821 is also soft bricked can any one help please? It is going to fast boot mode, i have tried installing TWRP. It has shown that twrp has been installed, but when i tried to get into recovery it is showing a flashing blue screen and immediately the entire screen is going dark. Please some one guide me. Thanks in advance.
Click to expand...
Click to collapse
You need to flash the correct recovery for 15s firmware. It is from TeamSpain.
Follow the instructions from this post. Click here.
sanke1 said:
You need to flash the correct recovery for 15s firmware. It is from TeamSpain.
Follow the instructions from this post. Click here.
Click to expand...
Click to collapse
Thanks Mr. Snake 1, will try this one and let u know the result.thanks again.
AJJU1972 said:
Thanks Mr. Snake 1, will try this one and let u know the result.thanks again.
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
Click to expand...
Click to collapse
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
AJJU1972 said:
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
Click to expand...
Click to collapse
You have flashed 15s recovery and booted into CM ROM which is based on 14s or vice versa.
If you have flashed 15s recovery from TeamSpain, make sure that you flash CM ROM which is based on 15s or 16s only.
sanke1 said:
You have flashed 15s recovery and booted into CM ROM which is based on 14s or vice versa.
If you have flashed 15s recovery from TeamSpain, make sure that you flash CM ROM which is based on 15s or 16s only.
Click to expand...
Click to collapse
Thanks Mr. Snake1 finally i got my mobile working after a long time. Testing weather or not all the features are working. Post again with the results. Thanks a lot for your support.
Leeco le max 2 dead without system ...
good personal afternoon, I'm new here and I need help, I have a le Leeco max 2 and he came into loop after a atualizção for rom cuoco92, there installed TWRP the temspain downloaded the rom also the teamspain 15s and do the procedure by adb sideload and sometimes the protocol fail or lock in 47% already tried in every way to recover the device, tried to at OTG more this TWRP does not recognize the OTG cable, can anyone help me give me a light please, I'm the device locked to 1 month ...
A fix for hard brick you can find here http://www.letv.re/topic/1471-unbrick-le-max-2-qfil-rom/
Got the same problem but much worst.
I kind of have the same problem. But its different in its own way. The phone would turn off on its own. And soft brick for maybe 2-3 hours. And then unbrick it self. Meanwhile when u turn it on, you can feel the vibration of the device turn on, but no life on screen. When It does turn of it has the chance to turn on, show the "super powered by ecosystem" and then a blue square would cover the center of the screen. After that ur forced to turn it off again. And turn it back on hoping it won't brick again. When it does turn on normally, there is a chance it would just randomly power off and brick.(even if you are playing a game or browsing the web), I don't know if its hardware problem or software problem. (Btw iam typing this on a note pad so if the phone does brick, I don't have to type again.) It be great if you guys can help me out
First of all, my phone isn't rooted and knox is not triggered.
Today I rebooted my mobile phone because the app adhell wasn't working properly and after that my phone got stuck in the boot loop (samsung letters in the screen).
I've tried wiping the cache and flashing the firmware again with ODIN, didn't work. I can't enter to the safe mode and erase adhell neither. Samsung smart switch doesn't recognise my device so I can't use it.
I run out of ideas, what else can I do to get out of the loop without erasing all the data in the phone?
Thanks in advance.
Same thing here, after update (official from samsung), Mine is stuck in a bootloop too.
Anyone, please help?
---------- Post added at 09:31 PM ---------- Previous post was at 09:29 PM ----------
Same thing here...
If Adhell is the cause, then fixing the bootloop is just as simple as removing it. As for how you go about fixing it, you have a few options.
1) Returning phone to store bought from if still under warranty and getting them to help. They'd most probably wipe it or replace it.
2) Full reset wiping data you don't have backed up
3) Custom recovery that lets you delete the files manually, but will probably trip KNOX
You could always try booting into recovery and see if your PC picks up your phone, then backing up what you can from there. But again, that might not be an option because stock recovery. TWRP lets you access files from your PC, but again trips KNOX.
ProdigyThirteen said:
If Adhell is the cause, then fixing the bootloop is just as simple as removing it. As for how you go about fixing it, you have a few options.
1) Returning phone to store bought from if still under warranty and getting them to help. They'd most probably wipe it or replace it.
2) Full reset wiping data you don't have backed up
3) Custom recovery that lets you delete the files manually, but will probably trip KNOX
You could always try booting into recovery and see if your PC picks up your phone, then backing up what you can from there. But again, that might not be an option because stock recovery. TWRP lets you access files from your PC, but again trips KNOX.
Click to expand...
Click to collapse
The phone is not under warranty and I don't have any data backup. How can I install the TWRP recovery in the situation I am now?
Now it doesn't enter to the recovery mode, and I didn't do anything new.
polema said:
The phone is not under warranty and I don't have any data backup. How can I install the TWRP recovery in the situation I am now?
Click to expand...
Click to collapse
First off, download SkipSoft Toolkit, go through the options it gives you until you're on the model of your phone and Android version. Then if you haven't already installed the drivers, do it. SkipSoft has the ones you need there. SkipSoft also downloads all the files you need to root, to flash TWRP, has a stock recovery if you mess up or want to return to stock for whatever reason after.
Then select the option to flash a custom recovery and root. You don't have to root, it won't do it automatically, that's something you have to flash yourself inside of TWRP if you want to. If you do want to root, look into Magisk. It lets you still use apps that normally don't work on rooted devices (it doesn't trip SafetyNet).
As for flashing the recovery, there's a wall of text that SkipSoft gives you to read which I'd recommend going over to make sure you know what you're doing. If you screw up, 99% of the time there is a fix for it so don't panic.
If all goes well, you should see TWRP loading up when you boot into recovery. Then when you connect your phone to your PC, it should appear as normal and you can copy any files you want to back up. TWRP has a Wipe option that will completely clear all installed apps, all app data, any setting changes and set your phone back to stock without deleting the files you have on it to save you from having to copy them all back again after. I'd also recommend making a complete backup of everything through the option in TWRP at that point for future security, and just in case you want to root.
If you have any more questions, just ask. I don't have an answer for everything, but I'll try my best.
ProdigyThirteen said:
First off, download SkipSoft Toolkit, go through the options it gives you until you're on the model of your phone and Android version. Then if you haven't already installed the drivers, do it. SkipSoft has the ones you need there. SkipSoft also downloads all the files you need to root, to flash TWRP, has a stock recovery if you mess up or want to return to stock for whatever reason after.
Then select the option to flash a custom recovery and root. You don't have to root, it won't do it automatically, that's something you have to flash yourself inside of TWRP if you want to. If you do want to root, look into Magisk. It lets you still use apps that normally don't work on rooted devices (it doesn't trip SafetyNet).
As for flashing the recovery, there's a wall of text that SkipSoft gives you to read which I'd recommend going over to make sure you know what you're doing. If you screw up, 99% of the time there is a fix for it so don't panic.
If all goes well, you should see TWRP loading up when you boot into recovery. Then when you connect your phone to your PC, it should appear as normal and you can copy any files you want to back up. TWRP has a Wipe option that will completely clear all installed apps, all app data, any setting changes and set your phone back to stock without deleting the files you have on it to save you from having to copy them all back again after. I'd also recommend making a complete backup of everything through the option in TWRP at that point for future security, and just in case you want to root.
If you have any more questions, just ask. I don't have an answer for everything, but I'll try my best.
Click to expand...
Click to collapse
Thanks for all the help.
I have android 7 nougat in my phone and it's not among the options, what should I do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
polema said:
Thanks for all the help.
I have android 7 nougat in my phone and it's not among the options, what should I do?
Click to expand...
Click to collapse
Update SkipSoft, recent version is 1.5.6, 7.0 is in that version.
If you can't update for whatever reasons, you can manually download the TWRP files from here and drop those into C:\Unified_Android_Toolkit\recovery\GalaxyS6Edge, then select any version of Android and follow what it says. Just don't flash the root it provides, use Magisk as I said before.
polema said:
Thanks for all the help.
I have android 7 nougat in my phone and it's not among the options, what should I do?
Click to expand...
Click to collapse
You still having trouble with this?
Finally I managed to repair the phone with smart switch, I've lost my photos/videos but the rest was saved in samsung cloud.
polema said:
Finally I managed to repair the phone with smart switch, I've lost my photos/videos but the rest was saved in samsung cloud.
Click to expand...
Click to collapse
Hi, I am having the same problem as you since yesterday afternoon where it's stuck in a boot loop, my notification light was blinking so when I went to check on it the phone was turned off but the light was still blinking, the light only stopped after the battery drained completely. when I tried to turn the phone on after charging it, it's still stuck in a boot loop, only thing I can do is hold the volume down, power, and home button down to enter the "downloading do not turn off target screen." I downloaded smart switch on my laptop last night to see if I can fix my phone through that but it says unsupported device, and when I try emergency software recovery and initialization option when I enter model name and S/N number and click OK the program closes and nothing happens. polema what did you do to fix your device?
abhi821 said:
Hi, I am having the same problem as you since yesterday afternoon where it's stuck in a boot loop, my notification light was blinking so when I went to check on it the phone was turned off but the light was still blinking, the light only stopped after the battery drained completely. when I tried to turn the phone on after charging it, it's still stuck in a boot loop, only thing I can do is hold the volume down, power, and home button down to enter the "downloading do not turn off target screen." I downloaded smart switch on my laptop last night to see if I can fix my phone through that but it says unsupported device, and when I try emergency software recovery and initialization option when I enter model name and S/N number and click OK the program closes and nothing happens. polema what did you do to fix your device?
Click to expand...
Click to collapse
Flash stock firmware through Odin.
Or try boot your phone to recovery mode (up home and Bixby. If it boots to recovery plug to pc and see if smart switch recognises it.
callumbr1 said:
Flash stock firmware through Odin.
Or try boot your phone to recovery mode (up home and Bixby. If it boots to recovery plug to pc and see if smart switch recognises it.
Click to expand...
Click to collapse
I forgot to mention my phone is a samsung galaxy s6 edge, also I tired the recovery mode but it still does the boot loop. Are there clear instructions to flash stock firmware through Odin?
abhi821 said:
I forgot to mention my phone is a samsung galaxy s6 edge, also I tired the recovery mode but it still does the boot loop. Are there clear instructions to flash stock firmware through Odin?
Click to expand...
Click to collapse
What android version is it and what region and model? Tell me these and I'll post the firmware with the steps to flash.
callumbr1 said:
What android version is it and what region and model? Tell me these and I'll post the firmware with the steps to flash.
Click to expand...
Click to collapse
I got my phone through AT&T in USA model is SM-G925AUCU1AOCE and I not sure what android version I have.
Device:COL-L29C636 dual Sim 4gb/128gb
Initially the phone was on android 8.1
Unlocked the bootloader and flashed it to android 9 with hurUpdater and twrp.
I noticed the phone was draining battery a lot faster than it was android 8.1.
So I went to twrp and made a factory reset and it stuck on the screen "just a sec " after the wifi connection screen.
So I went into twrp and pressed the button "format data" and I waited for like 10minutes(it says wipe completed but never completed the process to exit twrp)
And then I hold the power button to force a restart.
And now it has no recovery and no OS and no erecovery.
The phone could still boot into fastboot mode.
I tried Huawei multitool but it needs 5 img's which I never had by extracting the update.app
I did flash system.img by fastboot but the phone goes into the screen "unlocked bootloader" warning screen and I knew it was trying to go into recovery because booting into the OS would have additional words below like press the power button to boot normally or hold volume+ to enter erecovery but everytime the phone tries to enter recovery mode that is corrupted.
I think that if I flash the stock recovery and system image it probably would probably end the bootloop.
But extracting the update.app reveals a couple of recovery like recovery_ramdis and recovery_vendor (I think there's 3 of them)
I have no idea how to flash these recoveries.
I tried to flash twrp in fastboot and somehow it never goes into twrp and still stuck on the bootloader unlocked warning screen and I have no idea why flashing twrp successfully but the phone doesn't enter into twrp.
Can anyone shed some light on how to recover my device?
I think I can save my device like this:
Download firmware with firmware finder >Extract update.app and flash the 5 img's in the Huawei multi tool(except the format of the img's that I extracted doesn't look like the ones in the Huawei Multi tool)
Can't enter recovery or erecovery
Fastboot is still usable though.
Unlocked bootloader.
Link to the twrp I used for my device
https://forum.xda-developers.com/honor-10/development/recovery-twrp-3-2-1-0-recovery-view-10-t3798751
I'm stuck here too.... Can we install e recovery with multi tools anyone?
Honor 10 bricked
Hello Guys,
I had exactly the same problem.
I upgraded to EMUI 9 and everything worked fine but I wanted to go back to EMUI 8.1 so I went to TWRP with the intention of doing a factory restoration and downgrade.
I made a Wipe / data, Wipe dalvic / format all data. After this I waited a lot and it didn´t respond.
I had to force the restart and since then the phone no longer works. Same for me, the phone has no recovery and no OS and no erecovery.
I have contacted the people from FunckyHuawei. I have paid 1 credit in order to unbrick the phone but it did not work. They said that; "It would need to be able to reach rescue recovery mode. If it can not reach that, it may be bricked beyond repair. "
Then I contacted another technician, I connected to my computer remotely and he tried to flash all necessary files via fastboot but some of them failed to flash.
He said it looks like there is no TWRP recovery COMPATIBLE for EMUI9 yet.
files attached.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now what to do guys? I will really apreciate any help. The phone has only 3 weeks and I feel so noob now.
Kind Regards,
Gerardo
---------- Post added at 01:05 AM ---------- Previous post was at 12:49 AM ----------
pit777 said:
I'm stuck here too.... Can we install e recovery with multi tools anyone?
Click to expand...
Click to collapse
Sorry Bro, I have already tried that. Even via fastboot and it fails. I think this is happening because EMUI9 needs a compatible twrp which is needed to install the erecovery files.. that´s what I have understood.
Hopefully a compatible TWRP for EMUI9 will be released soon.
yujinloh said:
Device:COL-L29C636 dual Sim 4gb/128gb
Initially the phone was on android 8.1
Unlocked the bootloader and flashed it to android 9 with hurUpdater and twrp.
I noticed the phone was draining battery a lot faster than it was android 8.1.
So I went to twrp and made a factory reset and it stuck on the screen "just a sec " after the wifi connection screen.
So I went into twrp and pressed the button "format data" and I waited for like 10minutes(it says wipe completed but never completed the process to exit twrp)
And then I hold the power button to force a restart.
And now it has no recovery and no OS and no erecovery.
The phone could still boot into fastboot mode.
I tried Huawei multitool but it needs 5 img's which I never had by extracting the update.app
I did flash system.img by fastboot but the phone goes into the screen "unlocked bootloader" warning screen and I knew it was trying to go into recovery because booting into the OS would have additional words below like press the power button to boot normally or hold volume+ to enter erecovery but everytime the phone tries to enter recovery mode that is corrupted.
I think that if I flash the stock recovery and system image it probably would probably end the bootloop.
But extracting the update.app reveals a couple of recovery like recovery_ramdis and recovery_vendor (I think there's 3 of them)
I have no idea how to flash these recoveries.
I tried to flash twrp in fastboot and somehow it never goes into twrp and still stuck on the bootloader unlocked warning screen and I have no idea why flashing twrp successfully but the phone doesn't enter into twrp.
Can anyone shed some light on how to recover my device?
I think I can save my device like this:
Download firmware with firmware finder >Extract update.app and flash the 5 img's in the Huawei multi tool(except the format of the img's that I extracted doesn't look like the ones in the Huawei Multi tool)
Can't enter recovery or erecovery
Fastboot is still usable though.
Unlocked bootloader.
Link to the twrp I used for my device
https://forum.xda-developers.com/ho...covery-twrp-3-2-1-0-recovery-view-10-t3798751
Click to expand...
Click to collapse
Have you tried this:?
https://funkyhuawei.club/unbricking
Hello!
I've had AICP on my Z2-wifi tablet for a long time, have not modified it in year but I am having a lot of problems lately. Play Store keeps telling me to clean up my storage to install more apps, but I already have 8gb free.
I decided to Factory Reset and after it rebooted, nothing changed.
Okay then let's access Recovery and do things myself.
Holding Power+Volume Down gives me a purple LED but then AICP still loads.
When the purple led appears, if I lift my finger it turns yellow, then Sony logo again, AICP, Android desktop.
Tried to Reboot into Recovery from AICP but it just won't do it.
Try reboot into Recovery from ADB but it rebooted again directly into android.
"adb reboot recovery"
Went with "adb reboot bootloader" and the tablet reboots into a black screen with the corner led blue. Not accessible from ADB anymore. Nothing on screen. Can't flash twrp is ADB does not detect it. "fastboot flash recovery twrp.img" gives me < waiting for any device >.
I just installed Sony EMMA tool, I need to access fastboot but the tablet just reboots into android. Managed to boot into bootloader black screen with blue led, Emma does not detect it.
Any suggestions?
Tried to get root access with Easy Root Tool
https://forum.xda-developers.com/showthread.php?p=53448680#post53448680
Got this error:
Kernel version is 3.4.0-aicp-g198fdc7
Version does not match 3.4.0-perf-ge4322cd needs patching
Kernel module patched.
Android 5.0 and later only support position-independent executables (-fPIE)
Now trying the Sony Xperia Companion for Windows tool.
https://www.sony.ca/en/electronics/...ts-mobile-phones/xperia-xa2/articles/00236877
It doesn't want to update but there is a Software Repair option. Which does not work. My Tablet is still rebooting to android AICP.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried the Sony Emma tool.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/download-flash-tool/
Tablet has a black screen and blue LED.
Not detected by Emma.
Installed Android Studio, let's see if a reboot of my PC helps the get the right drivers running.
https://developer.android.com/studio
Installing the Google USB Drivers.
https://developer.android.com/studio/run/win-usb
The tablet is now listed when using "fastboot devices"
Trying to boot into TWRP 3.4 from this thread https://forum.xda-developers.com/xp...y-twrp-3-4-0-castor-windy-sony-t4110865/page3
FAILED: remote: "dtb not found"
Spent over 4 hours trying to fix my tablet today... Will try again tomorrow...
Flashing TWRP 3.2.1 from here.
https://drive.google.com/file/d/15vBMmeAYhnLxP3GTFTBka-kIemxMDb3r/view?usp=sharing
Flash seems to have worked, boot into twrp321.img just turned off the tablet.
Tablet is stuck in a boot loop at AICP colored letters animation.
Flashing TWRP 3.2.1 from this thread now, in case it is different, but file size seems to be the same.
https://forum.xda-developers.com/xperia-z2-tablet/development/7-x-x-carbonrom-cr-5-1-t3654983
Flashing boot.img from AICP weekly
https://dwnld.aicp-rom.com/device/castor_windy/WEEKLY/aicp_castor_windy_q-15.0-WEEKLY-20201002.zip
fastboot error Couldn't parse partition size '0x'
Well... this can't be good...
Flashing using the "fastboot flash:raw boot boot.img" command.
Now i got a bootloop with just Sony Xperia logo and the purple LED flashing.
When holding volume Up + power i get 3 vibrations, then it reboots into black screen and blue LED (fastboot mode).
Running out of ideas...
Sony Emma tool does not see the tablet in fastboot mode.
Xperia Companion wants me to unlock the device, which means going into android, not going to work as all I have now is fastboot mode.
I was hoping I could use this to clean up my mess and reset everything back to default factory settings.
Wanted to try Android Flash Tool, a browser based solution. It is not seeing my tablet.
https://flash.android.com/devices?continue=/custom
Trying Flashtool.net instead.
http://www.flashtool.net/downloads_windows.php
Will try this Sony Stock.
https://forum.xda-developers.com/xp...lipopprerooted231a128z2-tabletsgp511-t3100821
NotAPirate said:
Trying Flashtool.net instead.
http://www.flashtool.net/downloads_windows.php
Will try this Sony Stock.
https://forum.xda-developers.com/xp...lipopprerooted231a128z2-tabletsgp511-t3100821
Click to expand...
Click to collapse
Hey @NotAPirate,,
Got your tag bud!
I have not been able to read through every post you made yet. Just got home from work and read the OP.
Couple things to start trouble shooting, keep in mind i have only read the OP then started typing you a message, so if you are past all of this below, sorry!
.
1. Have you been able to access recovery yet and clean up your tablet? Seen in your OP and that your tab rebooted to AICP when you tried to boot to recovery. After the tablet starts and you see the SONY logo with XPERIA across the center bottom, start tapping the VOLUME UP button, no need to hold the power button. Tap repeatedly till you see a Purple LED, then you will feel vibration and the LED will turn Orange, then you can stop tapping, not sure how many are needed, but to get you in there do it.
2. When you boot the tablet do you see XPERIA across the bottom in the center. The SONY name will be centered in the middle of the tablet and XPERIA will be across the bottom centered while booting from power off or a reboot. I only ask, because older fw does not have XPERIA across the bottom and the older FW does not work well with MARSHMALLOW + ROMS.
3. I am not familiar with EMMA, know what it is, just never used it. I can walk you through the FLASHTOOL steps if you want to start fresh using Flashtool and an FTF. I have always use flashtool and always got my tab fixed and back to original when i Bork something up good. I have links to the pages that give step by step instructions, and have a Pre-ROOTED Android 6.0 SONY Stock ROM in FTF format somewhere. The FTF is what is needed to flash original Sony fw, in case you didn't know. If you did....well my bad then.
I will read through everything in the morning and get back to you then.
Have a good evening or day, which ever place in the world your in.
@NotAPirate,
Read through the thread. Unfortunately i am unable to determine what it is you are trying to do exactly. Is TWRP recovery not installed, or not opening when you try to access recovery?
Also, i did a little research this morning, my wife is getting an XPERIA 5 plus or pro. Anyway, i learned in reading through some threads for her phone, once you UNLOCK the boot-loader, you cannot use EMMA or Sony's Flash Tool, etc. You will need to use flashtool by androxyde. here is the link https://forum.xda-developers.com/showthread.php?t=920746 for some general reading. Here is the link about official Sony tools not working https://xperiafirmware.com/flashtool/ in the middle of the post you will see it. The flash tool they are talking about IS-NOT the one i linked previous.
The above links and info is because you were talking about just re-flashing your device. But before starting from scratch, let's narrow down exactly what the problem you are having is, then we will try to fix that, and re-flash to Stock OS as a last resort.
If you decide to just use flashtool and start over, let me know and i will send you an older version of flashtool that seems to work good for our device, always has for me anyway. The newest may work, i just never tried it.
**If you want to attempt to troubleshoot this without re-flashing to the beginning, please answer the 2nd questions in my previous post as well. It will help me narrow down the problem, as it will give an indication of the FW you are on**
I am not a dev nor do i know all the cmd line tricks to get things done quick like others can, just been using this tablet for 5 years and have been through it all, it seems and know what to check and look for....most of the time anyway..
Plugging the tablet in my usb power supply.
Held volume UP only, when Sony Xperia logos were visible and waited until LED turned yellow and felt vibration.
TWRP 3.2.1-1 loaded!
Formatting Data
Wipe Dalvik/Cache
Wipe System
Wipe Internal
Install AICP weekly
https://dwnld.aicp-rom.com/device/ca...Y-20201002.zip
Install OpenGapps, ARM, Android 10, Nano.https://opengapps.org/
Reboot.
purple Led is flashing a few times on Xperia Logo.
AICP custom rom logo animation.
First time setup of Android, WOOHOO!
Up next, give TWRP 3.4 a shot, and try to root with Magisk.
NotAPirate said:
Plugging the tablet in my usb power supply.
Held volume UP only, when Sony Xperia logos were visible and waited until LED turned yellow and felt vibration.
TWRP 3.2.1-1 loaded!
Formatting Data
Wipe Dalvik/Cache
Wipe System
Wipe Internal
Install AICP weekly
https://dwnld.aicp-rom.com/device/ca...Y-20201002.zip
Install OpenGapps, ARM, Android 10, Nano.https://opengapps.org/
Reboot.
purple Led is flashing a few times on Xperia Logo.
AICP custom rom logo animation.
First time setup of Android, WOOHOO!
Up next, give TWRP 3.4 a shot, and try to root with Magisk.
Click to expand...
Click to collapse
@NotAPirate,
Good deal bro!
Yes the PURPLE flashing LED on boot (at Xperia Log) is normal. No worries there.
AICP from spiritcroc is OFFICIAL and has OTA's. They are under the AICP settings in the Settings panel. In case you were not aware the OTA's worked on AICP.
Now, 3.4 from Spiritcroc, should be installable without an issue. I flashed 3.4 with fast-boot commands in Boot-loader mode.
I personally use MAGISK 20.1 on my device. I ran into a few problems with my audio mods when on MAGISK 20.4. Just an FYI!!!! The newest MAGISK manager is fine. All you need to do is flash in TWRP and reboot. Then open the magisk manager and do your thing. If the app is missing in the app drawer, use a file manager and open the MAGISK zip you flashed and the apk will be in the COMMON folder if not mistaken. Folder may be wrong but looking around will find it.
If i can assist with anything, let me know!!!!