I had twrp installed and then i flashed cm13
A fews days later i flashed xposed using twrp and after flashing, it said that stock recovery was trying to replace twrp and asked to swipe to disable it.
i swiped it.
now when i try to boot to recovery, its stuck at mi logo
everything else working fine
just i cant boot into recovery now.
i flashed twrp again using fastboot
but still i m unable to boot to recovery.
Any help would be appreciated
Thanks in advanvce
Flash it using miflash tool.
You have tried flashing using miflash before , haven't you?
Then the procedure is the same, only this time you have to rename twrp file into recovery.img then overwrite original recovery.img in the target miflash folder. Don't forget to remove other files you don't want to be flashed to your device I.e system , data , etc , just keep .XML files or other text files .
Then after you think ready just go flash it
Good luck sir
Yokohart said:
Flash it using miflash tool.
You have tried flashing using miflash before , haven't you?
Then the procedure is the same, only this time you have to rename twrp file into recovery.img then overwrite original recovery.img in the target miflash folder. Don't forget to remove other files you don't want to be flashed to your device I.e system , data , etc , just keep .XML files or other text files .
Then after you think ready just go flash it
Good luck sir
Click to expand...
Click to collapse
Thanks for the reply
will try that
hope it works
yashthakur797 said:
Thanks for the reply
will try that
hope it works
Click to expand...
Click to collapse
You're welcome and good luck
Now I realised that there is no problem with twrp
Actually booting to recovery is taking too long
Whenever I boot to recovery, it shows the mi logo for 5-10 mins and then twrp boots up
Any idea what is the reason for it??
yashthakur797 said:
Now I realised that there is no problem with twrp
Actually booting to recovery is taking too long
Whenever I boot to recovery, it shows the mi logo for 5-10 mins and then twrp boots up
Any idea what is the reason for it??
Click to expand...
Click to collapse
Because you're still on stock firmware , maybe?
Yokohart said:
Because you're still on stock firmware , maybe?
Click to expand...
Click to collapse
i have installed the cm13 firmware
that might not be the reason
yashthakur797 said:
i have installed the cm13 firmware
that might not be the reason
Click to expand...
Click to collapse
which cm13 firmware by who?
actually if you have cm13 firmware the boot logo should change to cm13 logo.
cm13 firmware provided by thestrix
in my case i get the mi logo and then cm13 boot animation
the normal boot speed is fine
but when i boot to recovery, it takes a long time
Related
Hi guys,
I am using the link below to perform the restore to stock from CM13 but I think I am not interpreting the questions in this post correctly.
http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268
I tried to follow them to get my Honor 5x back to stock rom (while still keeping TWRP) and it was a no go. I kept getting stuck in a boot loop. I was able to immediately reflash CM13 though and get it functionaly. Would someone be kind enough to verify for me as to what steps exactly I need to follow (including ROM names, etc.)? I would greatly appreciate it.
Thanks.
@DigiGoon here's a person needing your help
I have a couple questions for you:
1) Before flashing CM13, what stock firmware version were you on? (e.g. b130, b140, b151, b331)
2) Before flashing CM13, did you take a NANDROID backup of your stock setup? Most guides have this step.
Follow these steps, and you'll get your stock ROM back.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
@DigiGoon
You are a lifesaver. That seems to have done the trick. Thanks a lot man!
fistfullofbeer said:
Hi guys,
I am using the link below to perform the restore to stock from CM13 but I think I am not interpreting the questions in this post correctly.
http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268
I tried to follow them to get my Honor 5x back to stock rom (while still keeping TWRP) and it was a no go. I kept getting stuck in a boot loop. I was able to immediately reflash CM13 though and get it functionaly. Would someone be kind enough to verify for me as to what steps exactly I need to follow (including ROM names, etc.)? I would greatly appreciate it.
Thanks.
Click to expand...
Click to collapse
There is also a full, latest twrp, recovery backup o.o for b331
You restore everything except data, erecovery, and recovery... 1.6 gig download o.o does the job in one fell swoop as long as you have latest twrp.
Just did this the other day...
fistfullofbeer said:
@DigiGoon
You are a lifesaver. That seems to have done the trick. Thanks a lot man!
Click to expand...
Click to collapse
Happy to help buddy.
DigiGoon said:
Follow these steps, and you'll get your stock ROM back.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
Click to expand...
Click to collapse
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
Yes it does replace, and you simply need to reflash TWRP again
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
It replaces the TWRP, and if you are flashing stock via 3 button method, then there is no way you can keep it, but if you are getting on stock by flashing individual files then just dont flash the recovery file and you will just have the TWRP alone.
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
Instead of flashing full update.app , i can help u just to stop doing a lot of work after flash
DigiGoon said:
It replaces the TWRP, and if you are flashing stock via 3 button method, then there is no way you can keep it, but if you are getting on stock by flashing individual files then just dont flash the recovery file and you will just have the TWRP alone.
Click to expand...
Click to collapse
So which is the three button method and which is the other?
gabepaul said:
So which is the three button method and which is the other?
Click to expand...
Click to collapse
Three button method is nothing but by placing update.app in /sdcard/dload/
And then put off the phone followed by pressing vol down+vol up+ power button . This will let it install full stock rom and phone looks brand new in terms of software
gabepaul said:
So which is the three button method and which is the other?
Click to expand...
Click to collapse
As @gopinaidu77 said about three button method, its just that. And about the other one, in that you have to extract all the important img files from UPDATE.APP and flash it via fastboot commands.
DigiGoon said:
As @gopinaidu77 said about three button method, its just that. And about the other one, in that you have to extract all the important img files from UPDATE.APP and flash it via fastboot commands.
Click to expand...
Click to collapse
so I've tried both, and I'm getting stuck on the "Honor for the brave, powered by Android" screen.
I should probably also add that im trying to downgrade from lineage 14.0 Nougat to the android 6.1 emui 3.1
gabepaul said:
so I've tried both, and I'm getting stuck on the "Honor for the brave, powered by Android" screen.
I should probably also add that im trying to downgrade from lineage 14.0 Nougat to the android 6.1 emui 3.1
Click to expand...
Click to collapse
Sorry. 6.0.1 is emui 4.0.1 . Well bro , u can still unbrick ur device . Can i know which build number u are on before u flashed lineageos ?
gopinaidu77 said:
Sorry. 6.0.1 is emui 4.0.1 . Well bro , u can still unbrick ur device . Can i know which build number u are on before u flashed lineageos ?
Click to expand...
Click to collapse
Oh yeah, I have restored it already. I made a nandroid backup, and so when it happened, I just rebooted into fastboot and reflashed TWRP, then restored my phone from the backup. Not sure which build. Wondering what went wrong? And how I can successfully convert to stock
gabepaul said:
Oh yeah, I have restored it already. I made a nandroid backup, and so when it happened, I just rebooted into fastboot and reflashed TWRP, then restored my phone from the backup. Not sure which build. Wondering what went wrong? And how I can successfully convert to stock
Click to expand...
Click to collapse
Extract UPDATE.APP via Huawei Update Extractor tool, pull out relevant img files (system.img, boot.img, recovery.img, recovery2.img(if not in your device), cust.img) flash this one by one via fastboot by booting your device in fastboot mode, fire the given below commands.
Code:
fastboot flash <img name w/o extension> <full path to the relevant img file>
After this try the three button method, if it doesn't work then boot into eRecovery then tap "Download Latest Firmware". It will connect to Wi-Fi and will start downloading the latest firmware of your device. After the process gets completed you'll be on stock ROM with your bootloader in "Locked" state.
You are guiding wrong bro . There is a need of extension too. Else it will give error saying file not found
CUST issue
Hi,
I tried to do the same, Boot.img, system.img and recovery.img are flashed successfully but I cannot flash CUST.img, following error occurs, please help.
it says: while writing 'cust'...,
error: FAILED (remote: command not allowed)
Please help, thanks in advance.
So, I've been trying to flash CyanogenMod 12.1, since I'm still stuck on EMUI 3.1, because I can't flash OTA updates (I've tried everything, dload method, and yes I have unrooted and used the stock recovery)
Every time I try to flash a ROM via TWRP it turns off for a second and then boots back to TWRP starting screen. Also, when I boot my phone the boot animation's Honor H is red for some reason.
Thanks in advance!
Fonku said:
So, I've been trying to flash CyanogenMod 12.1, since I'm still stuck on EMUI 3.1, because I can't flash OTA updates (I've tried everything, dload method, and yes I have unrooted and used the stock recovery)
Every time I try to flash a ROM via TWRP it turns off for a second and then boots back to TWRP starting screen. Also, when I boot my phone the boot animation's Honor H is red for some reason.
Thanks in advance!
Click to expand...
Click to collapse
Are you sure you have the right boot.img and recovery.img?
Usually that symptoms are due to messed partitions.
Did you flash current img files or did you got them from a different rom version?
zinko_pt said:
Are you sure you have the right boot.img and recovery.img?
Usually that symptoms are due to messed partitions.
Did you flash current img files or did you got them from a different rom version?
Click to expand...
Click to collapse
Well, actually I once bricked my phone and had to restore through a TWRP backup, that only had the System and Boot partitions and it was the B130 version when I had B140, but it worked. So, do I need to completely flash everything or can I just pick up some files from somewhere?
Fonku said:
Well, actually I once bricked my phone and had to restore through a TWRP backup, that only had the System and Boot partitions and it was the B130 version when I had B140, but it worked. So, do I need to completely flash everything or can I just pick up some files from somewhere?
Click to expand...
Click to collapse
No, you need to have all the files from the same version.
Flash boot, recovery, cust and system.
zinko_pt said:
No, you need to have all the files from the same version.
Flash boot, recovery, cust and system.
Click to expand...
Click to collapse
So, is there a FULL KIW-L21C432B140 restore packet somewhere?
Thanks for your help!
Fonku said:
So, is there a FULL KIW-L21C432B140 restore packet somewhere?
Thanks for your help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
You can use B130 as it is also Lollipop. But all the img from the same rom. You can update to B350 manually after, but first you need a stable rom working.
Let us know man if you fixed your phone. So if not, we can give firther recommendations.
Sent from my Galaxy Tab 3 using XDA Labs
Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.
I bricked my Note 3 while trying to to flash Miui update. I have tried all sorts of flashing miui roms with miflash but mobile restarts after its reached Mi logo with Android at bottom. However I could flash twrp and have tried all wipe all dvilk, cache, system but similar problem.
If u guys could help me to get my cell. Back.
varin11 said:
I bricked my Note 3 while trying to to flash Miui update. I have tried all sorts of flashing miui roms with miflash but mobile restarts after its reached Mi logo with Android at bottom. However I could flash twrp and have tried all wipe all dvilk, cache, system but similar problem.
If u guys could help me to get my cell. Back.
Click to expand...
Click to collapse
Go to twrp and format data.and Type YES to format. This will decrypt and erase data and internal storage.
And reboot.
---------- Post added at 10:05 AM ---------- Previous post was at 09:39 AM ----------
How u flashed miui update?
Using twrp or fastboot method?
naik2902 said:
Go to twrp and format data.and Type YES to format. This will decrypt and erase data and internal storage.
And reboot.
---------- Post added at 10:05 AM ---------- Previous post was at 09:39 AM ----------
How u flashed miui update?
Using twrp or fastboot method?
Click to expand...
Click to collapse
I accidentally flashed fastboot Miui update with TWRP
I accidentally flashed Miui update with TWRP.
varin11 said:
I accidentally flashed Miui update with TWRP.
Click to expand...
Click to collapse
So now ur phone is ok?
naik2902 said:
So now ur phone is ok?
Click to expand...
Click to collapse
I currently have flashed CM 14.1 Rom but this rom have some bugs like casting doesn't work on this.
I want to get back to MIUI. Tried RR and Lineage rom but it gives error 7 on flashing.
Will try the method you have suggested.Anything else do u suggest if the format data doesn't work
Do u think my boot loader is unlocked since I could install TWRp and custom Rom although I never opted for official boot loader unlock since it always gives error ''couldn't unlock'.
will wait for your reply before formatting data.
varin11 said:
I currently have flashed CM 14.1 Rom but this rom have some bugs like casting doesn't work on this.
I want to get back to MIUI. Tried RR and Lineage rom but it gives error 7 on flashing.
Will try the method you have suggested.Anything else do u suggest if the format data doesn't work
Do u think my boot loader is unlocked since I could install TWRp and custom Rom although I never opted for official boot loader unlock since it always gives error ''couldn't unlock'.
will wait for your reply before formatting data.
Click to expand...
Click to collapse
Just put phone in fastboot mode
And check bootloader status using command
fastboot oem device-info
Unlock= true ?
Device unlock=False
Its locked I think.
I tried formatting the dataand later flashing the MIUI rom but same error it goes to MI logo with Android logo down and the phone restarts.Any thing else u suggest.
varin11 said:
Device unlock=False
Its locked I think.
Click to expand...
Click to collapse
Unlock is false.
Ur bootloader is relocked.
Put phone in edl mode.
And Flash fastboot rom using miflashtool.
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
I tried flashing again in edl mode but the mobile restarts at Mi logo ( Android logo at bottom). Have tried flashing beta MIUI rom also but same error.
varin11 said:
I tried flashing again in edl mode but the mobile restarts at Mi logo ( Android logo at bottom). Have tried flashing beta MIUI rom also but same error.
Click to expand...
Click to collapse
Your bootloader is locked .Unlock the bootloader first and than flash the Rom again. Previously I had same problem, my problem was solved by unlocking the bootloader and clean flashing xiaomi.eu ROM through TWRP. If you have twrp installed than go for xiaomi.eu ROM. It is the best MIUI ROM. Hope this will help you.
varin11 said:
I tried flashing again in edl mode but the mobile restarts at Mi logo ( Android logo at bottom). Have tried flashing beta MIUI rom also but same error.
Click to expand...
Click to collapse
Are u flashing zip or tgz file. ?
Flash fastboot tgz rom with clean all option.
If rom is shown succesfully flashed on computer without any error showing. Then ok. no issues.
Firsboot takes time 10 to 15 min With milogo and Android.
rjrulz007 said:
Your bootloader is locked .Unlock the bootloader first and than flash the Rom again. Previously I had same problem, my problem was solved by unlocking the bootloader and clean flashing xiaomi.eu ROM through TWRP. If you have twrp installed than go for xiaomi.eu ROM. It is the best MIUI ROM. Hope this will help you.
Click to expand...
Click to collapse
How to unlock the boot loader.Mi unlock gives error cant unlock.
naik2902 said:
Are u flashing zip or tgz file. ?
Flash fastboot tgz rom with clean all option.
If rom is shown successfully flashed on computer without any error showing. Then ok. no issues.
Firsboot takes time 10 to 15 min With milogo and Android.
Click to expand...
Click to collapse
I am using tgz file to flash.Although the flashing is shown success but the mobile doesn't restart after the flash by itself.When I restart the phone it restarts by itself at MI log with Android logo at bottom.
I have tried flashing recovery from from TWRP also but similar error.
varin11 said:
I am using tgz file to flash.Although the flashing is shown success but the mobile doesn't restart after the flash by itself.When I restart the phone it restarts by itself at MI log with Android logo at bottom.
I have tried flashing recovery from from TWRP also but similar error.
Click to expand...
Click to collapse
Lol. After flash.when u restart phone the phone will start at android logo.
What u expect? haloween logo?
Then keep it on android logo for 15min. It will boot into miui. Leave it for 15 min.
Why did u flash twrp before? after flashing fastboot rom phone should boot into miui . just leave on android logo for 15 min . It will boot into miui.
http://bigota.d.miui.com/8.11.22/ke...22_20181122.0000.00_6.0_global_b2a5c7e388.tgz
naik2902 said:
Lol. After flash.when u restart phone the phone will start at android logo.
What u expect? haloween logo?
Then keep it on android logo for 15min. It will boot into miui. Leave it for 15 min.
Why did u flash twrp before? after flashing fastboot rom phone should boot into miui . just leave on android logo for 15 min . It will boot into miui.
http://bigota.d.miui.com/8.11.22/ke...22_20181122.0000.00_6.0_global_b2a5c7e388.tgz
Click to expand...
Click to collapse
U r right but in my case the mobile reboots itself once it reaches the Android logo.
Updated TWRP and finally could install RR rom based on Android 8.1. Great rom better than MIUI and don't want MIUI now. Thanks for the help guys.
Hello,
i was on EMUI 9 with my BKL-L09 and decided to give the custom roms a new try.
So i backed up my recovery_ramdisk (it was rooted with magisk before) and then flashed twrp (version 3.2.3-3).
Now i went for Wipe>format data and gave it a try. Result: it was hanging after makefs->(..) done. So i done the whole procedure again but it was still hanging.
Now i can't get back into twrp, because only the twrp bootscreen is showing up. Even after restoring my recovery_ramdisk backup with fastboot i can't get back into erecovery Is there anything i can do?
Thanks.
Ok, i solved this by myself through downloading the full ota update, extracting everything and flashing new kernel, system and recovery from ota update contents.
Can you put the CMD lines to do it?
Thank you anyway. I think i have the same problem.
jesusdoar said:
Can you put the CMD lines to do it?
Thank you anyway. I think i have the same problem.
Click to expand...
Click to collapse
I don't have this smartphone anymore but i remember the following:
1. Download the Full OTA Zip (e.g. here: https://www.getdroidtips.com/huawei...-update-for-honor-view-10-download-available/
2. Use the Huawei Update Extractor to extract the partitions from the content in the zip file. (https://forum.xda-developers.com/showthread.php?t=2433454)
3. Flash the partitions over the existing ones on your V10 using fastboot "fastboot flash recovery_ramdisk recovery_ramdisk.img , ...) - these contents are inside the full ota package
Greetings
Did it work out for you?
You can also try to flash the original erecovery using fastboot und use the download option inside the Recovery App. This will reset all partitions back to default. But also all data is lost.
Brodelpiet said:
Did it work out for you?
You can also try to flash the original erecovery using fastboot und use the download option inside the Recovery App. This will reset all partitions back to default. But also all data is lost.
Click to expand...
Click to collapse
it works thank you, now the problem is that the erecovery doesn´t download the package to flash.
jesusdoar said:
it works thank you, now the problem is that the erecovery doesn´t download the package to flash.
Click to expand...
Click to collapse
Did you just flash the erecovery or also the normal recovery partition und Kernel from the zip? What kind of error do you get?
Brodelpiet said:
Did you just flash the erecovery or also the normal recovery partition und Kernel from the zip? What kind of error do you get?
Click to expand...
Click to collapse
Yeah i flashed the kernel and the recovery ramdisk. And now it boots into erecovery, but inside the erecovery, the option to download and install the last version of emui doesn´t work, it just shows an error that it can´t get the package info.
thanks for your attention.
greets