hi,
i have a thl w100 and i delete a folder on system, starting hence never got boot.
works only via fastboot ou recovery. i can just copy the folder ? how ?
note: not against a original rom
tks
fabiodobill said:
hi,
i have a thl w100 and i delete a folder on system, starting hence never got boot.
works only via fastboot ou recovery. i can just copy the folder ? how ?
note: not against a original rom
tks
Click to expand...
Click to collapse
You will have to flash an original image of the system partition via odin.
Go find out how to make a custom odin package with a system img that you extract from a stock odin package.
Check out my tool in my signature.
Okay so I have a tablet that not many have CWM was not supported. a Pyle Astro 7 Tablet
Heres what i did so far.
1. Got Root Access and busybox successfully
2. Backed up Recovery.img System.img kernel.img Boot.img successfully via terminal emulator.
3. Used builder.clockworkmod.com and made CMW recovery for my device by extracting the recovery.fstab and using the stock device recovery.img
4.moved it to device
5. removed the install-recovery.sh
6. couldnt locate any other recovery related .sh or .p files except autorecoveryon.sh and autorecovery.off.sh also removed them for the time being.
7. attempted to flash cmwrecovery.img via terminal via following code.
flash_image recovery /sdcard/cwmrecovery.img (i named file cwmrecovery.img for easier access.
8.rebooted device into recovery.
Still stock recovery...
Am I missing anything?
Any help would be awesome! If needed i can upload the System.img Boot.img Recovery.img CWMrecovery.img and Kernel.img
Thank you in advance!
zonark said:
Okay so I have a tablet that not many have CWM was not supported. a Pyle Astro 7 Tablet
Heres what i did so far.
1. Got Root Access and busybox successfully
2. Backed up Recovery.img System.img kernel.img Boot.img successfully via terminal emulator.
3. Used builder.clockworkmod.com and made CMW recovery for my device by extracting the recovery.fstab and using the stock device recovery.img
4.moved it to device
5. removed the install-recovery.sh
6. couldnt locate any other recovery related .sh or .p files except autorecoveryon.sh and autorecovery.off.sh also removed them for the time being.
7. attempted to flash cmwrecovery.img via terminal via following code.
flash_image recovery /sdcard/cwmrecovery.img (i named file cwmrecovery.img for easier access.
8.rebooted device into recovery.
Still stock recovery...
Am I missing anything?
Any help would be awesome! If needed i can upload the System.img Boot.img Recovery.img CWMrecovery.img and Kernel.img
Thank you in advance!
Click to expand...
Click to collapse
How did you root your Pyle tablet? Any tips on the procedure? Im having trouble getting mine rooted.
Thanks!
i want to find suitable systemUi.apk file for my system ..... my device is an ( Chinese ) 7 inch table (company name : artcom) running with android 4.0.4 with processor A13 .
i searched online for it`s rom and i found this links :
http://www.4shared.com/get/4qQbjIjBc...-20130418.html
and a user tried to install it on the same device and it`s worked fine with some problem in touch screen .
so i wont to install it what i need is to get only the systemUi.apk from .img file
i tired to unzip it but says file is courrpted .
touristgump said:
i want to find suitable systemUi.apk file for my system ..... my device is an ( Chinese ) 7 inch table (company name : artcom) running with android 4.0.4 with processor A13 .
i searched online for it`s rom and i found this links :
http://www.4shared.com/get/4qQbjIjBc...-20130418.html
and a user tried to install it on the same device and it`s worked fine with some problem in touch screen .
so i wont to install it what i need is to get only the systemUi.apk from .img file
i tired to unzip it but says file is courrpted .
Click to expand...
Click to collapse
Extract system.IMG from your downloaded ROM
After extracting system.IMG install Linux reader (free software google it)
Using Linux reader open IMG file and extract system ui apk and paste it to system/app via any root file manager ....
Else use adb fast boot method to flash system.IMG in fast boot mode ...(this method will unroot your device )
All the best ?
Sent from my x604 using Tapatalk
The-Immortal said:
Extract system.IMG from your downloaded ROM
After extracting system.IMG install Linux reader (free software google it)
Using Linux reader open IMG file and extract system ui apk and paste it to system/app via any root file manager ....
Else use adb fast boot method to flash system.IMG in fast boot mode ...(this method will unroot your device )
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
i followed this tutorial :
http://forum.xda-developers.com/showthread.php?t=2294909
but when i import the img file into ext4 image unpacked. he says couldnt read the file
is there a pre step before use it to get system.img from .img file then use it to extract system.img
any help please
Unpack the system.img file as shown in the image below link, how can I create a file ".img" to flash by fastboot on an android device?
img.btrev.net/i/67879963952551771162.jpg
p3DRu said:
Unpack the system.img file as shown in the image below link, how can I create a file ".img" to flash by fastboot on an android device?
img.btrev.net/i/67879963952551771162.jpg
Click to expand...
Click to collapse
now you have to make an update zip and flash it through CWM/TWRP recovery!
(assuming that your phone has custom recovery installed)
Hey,
Today I used a ROM to flash my mobile (Samsung J5 2016 edition, model: J510FN) and I just used the perfect ROM, and it fits perfectly. But when I try to turn on WiFi it goes back swipe to off automatically when I swipe it to on.
I used this rom (version v1.1 because v2 and v3 were gone and bad): https://forum.xda-developers.com/galaxy-j5/development/rom-light-stock-rom-v1-t3467865
Someone knows what to do? I'm a beginner, so please explain it good. I have everything btw like Odin, TWRP, latest SuperSU, etc.
Please help.
Thanks
From your stock rom Copy the folder named Permissions from /system/etc and paste it at the same location in your new downloaded rom.
DONOT delete the existing folder , just replace the files.
Good Luck Cheers
akash14darshan said:
From your stock rom Copy the folder named Permissions from /system/etc and paste it at the same location in your new downloaded rom.
DONOT delete the existing folder , just replace the files.
Good Luck Cheers
Click to expand...
Click to collapse
But its a md5 file (my stock rom), how do I do it then?
Zarlen said:
But its a md5 file (my stock rom), how do I do it then?
Click to expand...
Click to collapse
You mean an img file , right?
If you have twrp or cwm backup of your stock rom , you can extract it from that file(ext4.system.tar.a) , if you dont have a twrp/cwm backup , you can try to flash stock rom from that img file and then copy necessary files into sdcard and then re flash your new rom and paste the existing files.
Good luck/
akash14darshan said:
You mean an img file , right?
If you have twrp or cwm backup of your stock rom , you can extract it from that file(ext4.system.tar.a) , if you dont have a twrp/cwm backup , you can try to flash stock rom from that img file and then copy necessary files into sdcard and then re flash your new rom and paste the existing files.
Good luck/
Click to expand...
Click to collapse
No, its an md5 file. Inside the md5 file (when I open it with winrar) it only shows hidedcache files etc and also boot.img
I need to have go to the patch (system/etc/permissions
Zarlen said:
No, its an md5 file. Inside the md5 file (when I open it with winrar) it only shows hidedcache files etc and also boot.img
I need to have go to the patch (system/etc/permissions
Click to expand...
Click to collapse
Then you might need to flash your stock rom first and then copy the necessary files.
I have an Mediatek device , steps to troubleshoot are same , but I have a zip of my stock rom created to access stock files when ever i need them.
I would advise you to do the same for future troubleshooting..
Good Luck mate
akash14darshan said:
Then you might need to flash your stock rom first and then copy the necessary files.
I have an Mediatek device , steps to troubleshoot are same , but I have a zip of my stock rom created to access stock files when ever i need them.
I would advise you to do the same for future troubleshooting..
Good Luck mate
Click to expand...
Click to collapse
And what are the nessecary files? Only the permissions folder or more?
Zarlen said:
And what are the nessecary files? Only the permissions folder or more?
Click to expand...
Click to collapse
Permission folder worked for me , but i would insist you to copy the entire /system partition as backup once you have flashed the stock rom just in case.
If permission folder doesnt work , then try replacing files starting with wlan from /system/lib/modules from stock to port
Do only when permissions folder doesnt work.