****Boeffla-Venom-Kernel****
****By****
****The~Skater~187****
*This kernel is based off a combination of Lord Boeffla's Samsung Galaxy S5 Cm 14.1 Kernel, Lineage OS kernel, with some tweaks and additions from around the net. I have decided that since I'm fairly new to all of this that I would start with what from what I could tell from my own personal use, this was the most stable custom kernel I found for my SM-G900P (kltespr). So I figure why not start there.
After several talks with Lord Boeffla on figuring out some kinks to get me up and running. I can now bring you guys a slightly more performance based version of the "World Famous, Boeffla Kernel".
*THIS KERNEL IS IN NO WAY SUPPORTED BY LORD BOEFLLA. So please dont trouble him with questions, unless running his full version of the kernel. Hopefully I will be able to keep Boeffla-config app compatible (has been for my last few builds).
*As I learn more I will be hopefully incorprating more options and fuctionality while keeeping to Lord Boeffla's idea of a Slim, Responsive, Feature rich kernel.
* I'm sorry but I cannot do requests for features, as I'm still picking this up as I go, unless you want to help with your requests.
* I am in no way responsible to damage done to any devices.
*Don't forget to make a back up before flashing*
~~~~~~~~~~~~~~~Flash at own risk~~~~~~~~~~~~~~~~~~
~~~~Standard-Boeffla-Kernel-Features~~~~
-- Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
-- Full integration with Boeffla-Config V2 configuration app (get it from http://www.boeffla.de) to configure all kernel settings
-- Additional governors: zzmoove, intelliactive, intellidemand, wheatley, smartmax, slim, intellimm, nightmare, lionheart, pegasusq
-- Zzmoove supporting native hotplugging profiles
-- Additional schedulers: fiops, bfq, sio, tripndroid, zen
-- Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
-- Wake up gestures implemented (double-tap-to-wake, swipe to wake)
-- Boeffla-Sound engine (Headphones and speaker volume configurable)
-- Configurable vnswap
-- True dynamic FSync (activated if screen on, deactived if screen off), configurable
-- Touch boost frequency configurable, touch boost switch
-- CPU Overclocking up to 2.84 GHz
-- CPU Voltages interface for undervolting/overvolting
-- GPU idle frequency 27 Mhz added
-- GPU governor selection support
-- Show GPU frequency usage per frequency in Boeffla-Config
-- Color control to adjust RGB color space + inverted mode
-- SD card read ahead buffer configurable (default increased to 1024 kB)
-- Ext4 File system tweaks (default to disabled)
-- System Tweaks predefined supported (default is off)
-- Android logger (logcat) configurable
-- Kernel logger (dmesg) configurable
-- Charge rates for AC charger, USB and wireless charging separately configurable (set charge rate to 0 to have stock charge logic back)
-- Charge information display support via Boeffla-Config V2 app
-- CIFS support (module, do not mount inside /data)
-- NFS support (module)
-- NTFS support (module)
-- XBox support (module)
-- OTG-Ethernet support (module)
-- TCP Congestion changed to Westwood
-- Swap supported (but not recommended, use zRam instead)
-- init.d support (in /system/etc/init.d - set correct permissions!)
-- Default entropies increased
-- Insecure kernel (adb has root privileges)
-- Automatic EFS backup
-- Kernel survival mode by Boeffla-Config app to survive CM rom flashes
-- Full support for mpdecision for best compatibility and smoothness (Use Boeffla-Config to configure min/max CPU frequencies + governors + schedulers only)
-- Integrated full busybox 1.26.2 (Boeffla compilation)
-- Auto-Root by kernel possible by request, not recommended for CM however (latest su included)
-- Kernel initialisation log file (with history of 3 log files)
-- Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
-- Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
-- Google gcc 4.9 toolchain used for best stability
-- Always using latest Initramfs
-- Always based on latest Galaxy S5 sm-g900f kernel sources by CM/LineageOS/Boeffla-Kernel
-- Kernel runs with SELinux enforcing by default, just as CM12 stock kernel for S5 - but can be configured to work in permissive mode in Boeffla-Config settings
Without Further Anticipation I Present
"Boeffla-Venom-Kernel"
See Changelogs For All Of The Additions I Have Been Able To Bring To The Wondeful World Of "Unofficial Boeffla Kernels"
LineageOS 14.1 Kernels:
~ Download Here:
https://www.mediafire.com/folder/oo46ez9e2xjc1/LineageOS+14.1
~ Mirror:
https://app.box.com/s/wg8l549ryj2o5rwikayd84baw54idkfz
LineageOS 15.1 Kernels:
~Download Here:
http://www.mediafire.com/folder/u3ijzvweuimzf/LineageOS_15.1
~Mirror:
https://app.box.com/s/atb42idmunccny8z2kgeckbczym24as5
~~~~~~~~~~~ Please note~~~~~~~~~~~
If you need support, please supply the following or support will not be given:
*Device Variant
*Current Rom & Android Version
*Bootloader & Baseband version
*Recovery & Version
*Recovery Log
I can't help if the only details given are "It didn't work" or "I can't flash this".
Anyways, build away, if you'd like to help my learn on this project you are welcome. Please contact me
Note due to AnyKernel compatibility this kernel will work on most Samsung Galaxy S5 marshmallow or nougat CM/LineageOS-based Roms.
Just make sure you flash over the kernel that came with the rom.
DO NOT FLASH OVER CUSTOM KERNELS!
XDA:DevDB Information
Boeffla-Venom-Kernel, for the Sprint Samsung Galaxy S5
Contributors:
Andi71, The~Skater~187, CrazyGamerGR, sunilpaulmathew, ktoonsz, faux123
Source Code: https://github.com/187MoD
Kernel Special Features: Boeffla/LineageOS Based
Version Information
Status: Beta
Created 2016-12-02
Last Updated 2018-07-13
Tweaks, Tricks & More:
ALWAYS MAKE A BACKUP FIRST
June 2017's Qualcomm Adreno 330 driver updated for the Sprint Samsung Galaxy S5 (Marshmallow & Under)
Can be found here:
https://app.box.com/s/g43q6p4bgzrc3vjuzopcsj0a1l1shaks
If you'd like to try my Venom script and/or Venom GPU script, they can be found here:
http://www.mediafire.com/folder/yrekjbedcpbo8/Venom-Tweaks
If you'd like to try out my new Venom-Mod Magisk module and/or my OpenCamera Magisk module for a bit more optimization/performance or customization, you can find them here:
http://www.mediafire.com/folder/np3yi5zsjbpa3/Magisk_Modules
OpenCamera app credit goes to: Mark Harman (I just made it into a module for Magisk)
Venom-Mod Magisk module includes these build.prop tweaks:
ro.secure=0
dalvik.vm.execution-mode=int:jit
dalvik.vm.dexopt-flags=m=y
ro.vold.umsdirtyratio=20
ro.home_app_adj=1
debug.kill_allocating_task=0
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
debug.egl.hw=1
debug.qctwa.statusbar=1
debug.performance.tuning=1
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.tether.denied=false
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.config.hw_menu_unlockscreen=false
ro.mot.buttonlight.timeout=0
ro.config.disable_hw_accel=false
ro.config.hw_quickpoweron=true
ro.configure.nocheckin=1
dev.bootcomplete=0
hwui.render_dirty_regions=false
hwui.disable_vsync=true
ro.wmt.blcr.enable=0
ro.ril.fast.dormancy.rule=2
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.telephony.call_ring.delay=0
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
dev.pm.dyn_samplingrate=1
debug.kill_allocating_task=0
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
boot.fps=20
ring.delay=0
ro.config.dha_tunnable=1
ro.config.hw_power_saving=1*
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
debug.gr.swapinterval=59
debug.egl.profiler=1
debug.composition.type=gpu
debug.composition.type=c2d
ro.min_pointer_dur=1
video.accelerate.hw=1
touch.presure.scale=0.001
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.product.gpu.driver=1
hw3d.force=1
hw2d.force=1
wifi.supplicant_scan_interval=220
persist.sys.ui.hw=1
persist.sampling_profiler=0
persist.radio.lteon=false
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.use_dithering=1
persist.android.strictmode=0
persist.service.adb.enable=1
persist.sys.use_16bpp_alpha=1
persist.wifi_scan_interval=220
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
persist.sys.composition.type=gpu
persist.sys.composition.type=c2d
persist.sys.shutdown.mode=hibernate
persist.splitwindow.support_all=true
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
net.ipv6.ip_no_pmtu_disc=0
net.ipv6.route.flush=1
net.ipv6.tcp_ecn=0
net.ipv6.tcp_fack=1
net.ipv6.tcp_mem=187000 187000 187000
net.ipv6.tcp_moderate_rcvbuf=1
net.ipv6.tcp_no_metrics_save=1
net.ipv6.tcp_rfc1337=1
net.ipv6.tcp_rmem=4096 39000 187000
net.ipv6.tcp_sack=1
net.ipv6.tcp_timestamps=1
net.ipv6.tcp_window_scaling=1
net.ipv6.tcp_wmem=4096 39000 18700
persist.radio.ap.phonetype=1
ro.telephony.gsm-routes-us-smsc=0
ro.config.combined_signal=false
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.gprsclass=32
ro.ril.hep=1
ro.ril.hsxpa=2
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=28
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=268449905
ro.ril.hsupa.category=9
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.amr.wideband=1
persist.ril.uart.flowctrl=10
persist.ril.mux.noofchannels=10
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576**
media.stagefright.enable-player=true
media.stagefright.enable-record=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
If your running Resurection Remix Marshmallow 5.7.4 November build, here something for you:
https://www.dropbox.com/s/cnggixpvp65dvxz/VID_20161202_234800.mp4?dl=0
Find the mod itself here: New Mods Added 7/3/18
Simply flash, delete stock RR boot animation and reboot
-For R.R. 6.1.0/Oreo framework mod:
https://app.box.com/s/o5eot1aojvfgl215ndk3p4hjbka8vh8v
(Framework-res.apk extracted from 7.02.2018 R.R. Kltedv)
-For older R.R. 5.7.4 framework mod:
https://app.box.com/s/5rezuwunj09lo62xdrgokeze5dixx8b9
Or if You' d like me to do some Custom Ones, provide framework-res of the Rom your running and what youd like your images to be.
Changelogs
***Venom Nougat Changelog***
~~~~~Venom 1.0~~~~~
*Initial Release (With Huge Help To Lord Boeffla)
*Modified some scripting
*Changed ZRAM compression to LZO
* Few Other Odds & Ends
*Latest Boeffla-Source-Update
*Boeffla-Any-Kernel-Update
*Updated Install Scripts
*Added Adreno Idler (Thanks to CrazyGamer)
* Switched Kernel Compression XZ to LZO
*Might be one to two things I'm forgetting
~~~~~Venom 2.0~~~~~
*Enabled Hybla TCP Congestion
*Switched to complete lzo compression
*Set Default_Hostname to "Venom"
~~~~~Venom 3.0~~~~~
*updated to latest "Boeffla Source"
*Not much more at this time
~~~~~Venom 4.0~~~~~
*full kernel comression to lz4
*compcacche_clean enabled
*ZRAM working again. (My Bad)
*Android Runtime_Compcache enabled
*Fixed Adreno Idler (Hopefully)
~~~~~Venom 5.0~~~~~
*Scrapped Adreno Idler, for now. (Wasn't working correctly)
~~~~~Venom 6.0~~~~~
*Update: Latest official Boeffla Source commits as of 13.12.16, 4.40pm CET
(Note: This removed all cpu boost functions, i.e. touchboost is also not available anymore)
*PowerSuspend Added (Thanks Faux123)
*Updated "msm-adreno-tz" (thanks Arter97)
*Adreno Idler is Back {should work now} [Fingers Crossed] (Thanks again Arter97)
~~~~~Venom 7.0~~~~~
(Synced latest Boeffla source)
*Fix: Security vulnerability CVE-2015-8966 fixed
*Fix: Security vulnerability CVE-2016-8655 fixed
~~~~~Venom 7.1~~~~~
(*New release increment system implemented)
*Update: Latest Boeffla/CM kernel commits as of 17.12.16, 2.00pm CET
*Fix: CPU scaling issues are fixed
*Change: Cleanup and sync with CM repo
~~~~~Venom 7.2~~~~~
*Update: Latest official CM/Boeffla kernel commits as of 18.12.16, 12.00 CET
~~~~~Venom 73~~~~~
*Updated with latest official CM/Boeffla kernel commits as of 23.12.16, 08.00 CET
*UMS mode should be working again now (Thanks to Lord Boeffla)
~~~~~Venom 7.4~~~~~
*Updated with latest official CM/Boeffla kernel commits as of 27.12.16, 08.00 CET
~~~~~Venom 7.5~~~~~
*Updated to latest CM/LineageOS kernel commits as of 29.12.16
*Removed adreno idler, for now (still wasn't working correctly)
*Updated Venom Script
~~~~~Venom 76~~~~~
*Updated to Latest official LineageOS/Boeffla Source as of 06.01.16, 05.54 EST
~~~~~Venom 7.7~~~~~
*Updated to latest official LineageOS/Boeffla Source as of 11.01.16, 07.02 EST
*Update Venom-Tweak Script (Disable All Kernel Sleepers)
~~~~~Venom 7.8~~~~~
*Updated to latest official LineageOS/Boeffla Sourcecode
~~~~~Venom 7.9~~~~~
*Updated to latest official LineageOS/Boeffla Sourcecode
~~~~~Venom 8.0~~~~~
*Updated with latest official LineageOS/Boeffla kernel commits as of 06.04.17, 12.00 EST
*Patched Kernel to Linux 3.4.113
*Tweaked PowerSuspend. (Should improve battery life a bit)
~~~~~Venom 8.1~~~~~
*Upated to latest official LineageOS/Boeffla Sources as of 13.02.16, 08.33 EST
~~~~~Venom 8.2~~~~~
*Upated to latest official LineageOS/Boeffla Sources
~~~~~Venom 8.3~~~~~
*Upated to latest official LineageOS/Boeffla Sources
~~~~~Venom 8.4~~~~~
*Upated to latest official LineageOS/Boeffla Sources
~~~~~Venom 8.5~~~~~
*Upated to latest official LineageOS/Boeffla Sources as of 23.05.17, 08.33 EST
*Tweaked powersuspend (trying to get a bit better screen off battery life)
*Disabled Sleepers
~~~~~Venom 8.6~~~~~
*Upated to latest official LineageOS/Boeffla Sources as of 06.30.17, 10.26 EST
(Just Source Code Update)
~~~~~Venom 8.7~~~~~
*Updated to latest official LineageOS/Boeffla Sources as of 08.07.17, 01.26 EST
*Fixed Camera
*Fixed Nfc (For Kltespr Variant)
*Added System Mountpoint Tweak
*Upped External Storage Read-Ahead to 2048(default)
*Added Back ability to make in-kernel busybox used system-wide
*Added Intellithermal V.2 (thanks to Faux123 and SunilPaulMathew)
~~~~~Venom 8.8~~~~~
*Updated to latest LineageOS/Boeffla Sources as of 10.07.17
*Added QuickWakeup
*ZZmoves adjustment to accommodate Overclocking (Thanks to Legitsu)
*Fixed Intelli-Thermal V2
*Added Adreno Idler
*Compiled with Linaro 4.9.4
~~~~~Venom 8.9~~~~~
*Updated to latest LineageOS/Boeffla Sources as of 10.13.17
*Added Mako Hotplugging
*Enable Cortex_A15 Optimization
*Fixed Recurring NFC Bug (KLTESPR Devices)
*Incorporated fbs's modified (ALMK)Low Memory Killer
*Updated to Latest Version ZZmoove Governor (Adjusted to accommodate Overclocking/Legitsu)
~~~~~Venom 9.0~~~~~
*Updated to latest LineageOS/Boeffla Sources as of 10.25.17
*Fixed IntellithermalV2 (again)
*Corrected Linux kernel version error
*Added LCD Screen On/Off Hooks (Thanks to CrazyGamer & Yank555.lu)
*** Venom Oreo Changelog***
~~~~Venom-Beta 1.0-LOS 15.1~~~~~
*Added support for Kltekdi, Kltekor, Kltedous
*Initial Oreo Release (With Help To Lord Boeffla & SunilPaulMathew)
*Compiled with Linaro 7.2.1 toolchain (thanks to ZaneZam & SunilPaulMathew)
*Updated to latest LineageOS/Boeffla Sources as of 06.24.18
*Enable OC to 2995:
-DISCLAIMER: (You Must Adjust Voltages for you OWN specific device on higher OC steps)
*ZZmoove: adjustment to acommodate Overclocking (Thanks to Legitsu)
*Enable 268 mhz underclock (Thanks to SunilPaulMatthew)
*Tweak bandwith on higher OC steps (Thanks to ktoonsz)
*Tweak deadline: Allow 0ms deadline latency, increase the read speed
*Set audience sleep delay to 0 to fix delay upon making phone calls
*Async I/O latency to a ssd greatly increased (34% gain,kleikamp & Ktoonsz)
*Fix possible memory leak with sysfs when stats table are freed
*Bump up Max Voltage (Adjusted for higher OC)
*Adjust Dirty Writeback For IO Boost
*Increased VM_MAX_READAHEAD to 512
*Optimize Kernel Samepage Merging
*QuickWakeup (Thanks CrazyGamer)
*PowerSuspend (Thanks Faux123)
*Enable Cortex_A15 Optimization
*Add Missing Graphite Define
*Ktoonsz Slimbus Overclock
*Runtime_Compcache Enabled
*Ktoonsz VFP Tweaks
~~~~Venom-Beta 1.1-LOS 15.1~~~~~
*Re-enable GPU Overclock
*Enable Frontswap
*Enable Vnswap
*Enable KSM
*KazuDante Dcache Tweak
*Fbs's Low Memory Killer
*Some Other Stuff I'm Forgetting
~~~~Venom-Beta 1.2-LOS 15.1~~~~~
*Update LineageOS Sources as of 2018.06.29
*Fix QuickWakeup
*Disable Swap Readahead
*Added System Mountpoint Tweak
*Added Boeffla wakelock blocker (thanks to sunilpaulmathew & franciscofranco)
*Increase Maximum Swappiness
*Revert To AOSP Low Memmory Killer
*Added Kernel mode neon (ShinySide)
*Disable Direct Reclaim File Pages
*Fix Charging issue on Kltekdi (Hopefully)
*Enable Unaligned Capability For ARM (CrazyGamerGR)
------Special Thanks to MacGyver MacGyver for Venom GPU script------
~~~~Venom-Beta 1.3-LOS 15.1~~~~~
*Kltekdi: Enable Correct Charger (should fix charging issue for good)
*Update min-default adreno frequency to be 200 MHz (kholk)
~~~~Venom-Beta 1.4-LOS 15.1~~~~~
*Compiled using UberTC 8.0 (for testing)
*Fix memory entry leak when calling Adreno Convertaddr (Shubhraprakash Das)
*Change clock rates to 19.2 MHz (Faux123/Qualcomm)
*Optimize Shec/Fair a bit (Faux123)
*Applied some new compiler optimizations
*Tweaks to Slimbus OC (CrazyGamerGR)
*Zswap: Uses LZ4 now (if available)
*Added support for LZ4-compressed kernel
*Fix memory leak in Mass Storage
*Numerous oom_kill tweaks
Just cause
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
The~Skater~187 said:
Thank you very much buddy! Lord Boeffla had announced that cm14 will be the last supported by him and crazy gamer will also only go for a few more months where as elemental x kernel and glitch are supported on nexus 7 and get regular updates so its great that you are starting here.
Btw I am going to flash it on g900f and also the updated gpu drivers. Last I tried them I got reboots while opening games lets hope its not the issue this time.
---------- Post added at 02:18 PM ---------- Previous post was at 01:54 PM ----------
The~Skater~187 said:
[SIZE="5][COLOR="Red"]Tweaks, Tricks & More:[/COLOR][/SIZE]
June's Qualcomm Adreno 330 driver updated for the Sprint Samsung Galaxy S5
Can be found here:
https://app.box.com/s/g43q6p4bgzrc3vjuzopcsj0a1l1shaks
If your running Resurection Remix Marshmalow 5.7.4 November build, here something for you:
https://app.box.com/s/gq64qyedsvb3i1igzkhsl45vdx0deqaj
Find the mod itself here:
https://app.box.com/s/74tdszg4g8zw4a1et74qoco5vbr12yot
Or if You' d like me to do some Custom Ones, provide framework-res of the Rom your running and what youd like your images to be.
Click to expand...
Click to collapse
The resurrection remix is a video of probably your kid flying kites !
Click to expand...
Click to collapse
Good job m8
OMG. THIS IS THE BEST. I flashed it on g900f running resurrection remix official build 1st December. I flashed the kernel and gpu drivers.
The kernel is amazing. Battery life is so good so far not draining like it was before. Performance is exceptional. Also the gpu drivers work this time and no reboots during games. The games are much much smoother.
I play score hero on it and it used to lag when animations and cut scenes came on but now its smooth. Amazing job. !!!
Does this work on G900I
Arjun KalyanRam said:
Does this work on G900I
Click to expand...
Click to collapse
It should. Backup boot.img from twrp and then flash this. If it doesn't work you can always go back to twrp and restore your back upped kernel.
htb2050 said:
It should. Backup boot.img from twrp and then flash this. If it doesn't work you can always go back to twrp and restore your back upped kernel.
Click to expand...
Click to collapse
Okey can u help me to enable volte in G900I please
htb2050 said:
The~Skater~187 said:
Thank you very much buddy! Lord Boeffla had announced that cm14 will be the last supported by him and crazy gamer will also only go for a few more months where as elemental x kernel and glitch are supported on nexus 7 and get regular updates so its great that you are starting here.
Btw I am going to flash it on g900f and also the updated gpu drivers. Last I tried them I got reboots while opening games lets hope its not the issue this time.
---------- Post added at 02:18 PM ---------- Previous post was at 01:54 PM ----------
The resurrection remix is a video of probably your kid flying kites !
Click to expand...
Click to collapse
Yeah, linked the wrong video. Corrected it though. The right video is now in the mod link.
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Click to expand...
Click to collapse
The~Skater~187 said:
htb2050 said:
Yeah, linked the wrong video. Corrected it though. The right video is now in the mod link.
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Click to expand...
Click to collapse
Rest of the stuff rocks but the GPU drivers cause visor playback to trigger a reboot and videos in other apps cause the apps to crash.
Click to expand...
Click to collapse
htb2050 said:
The~Skater~187 said:
Rest of the stuff rocks but the GPU drivers cause visor playback to trigger a reboot and videos in other apps cause the apps to crash.
Click to expand...
Click to collapse
I haven't had that problem myself, but thank you, I will look into it as soon as I can.
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Click to expand...
Click to collapse
The~Skater~187 said:
htb2050 said:
I haven't had that problem myself, but thank you, I will look into it as soon as I can.
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Click to expand...
Click to collapse
Well that's strange. I don't think there are any GPU related differences between sprint and normal klte variants. Anyways the reboot is triggered when I play a video in mxplayer. Mxplayer was using hardware plus decoder which works fine usually but after flashing the drivers opening mxplayer and clicking a video causes a reboot.
Click to expand...
Click to collapse
htb2050 said:
The~Skater~187 said:
Well that's strange. I don't think there are any GPU related differences between sprint and normal klte variants. Anyways the reboot is triggered when I play a video in mxplayer. Mxplayer was using hardware plus decoder which works fine usually but after flashing the drivers opening mxplayer and clicking a video causes a reboot.
Click to expand...
Click to collapse
I don't use mx player myself, I use vlc but try it without the driver updates
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Click to expand...
Click to collapse
The~Skater~187 said:
htb2050 said:
I don't use mx player myself, I use vlc but try it without the driver updates
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Click to expand...
Click to collapse
YouTube playback triggers a reboot too. I went back to stock drivers for now.
Click to expand...
Click to collapse
htb2050 said:
The~Skater~187 said:
YouTube playback triggers a reboot too. I went back to stock drivers for now.
Click to expand...
Click to collapse
Working here
http://cloud.tapatalk.com/s/584469c75df47/SCR_20161204_140508.mp4
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Click to expand...
Click to collapse
The~Skater~187 said:
htb2050 said:
Working here
http://cloud.tapatalk.com/s/584469c75df47/SCR_20161204_140508.mp4
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Click to expand...
Click to collapse
That is with the updated adreno drivers right?
Well that sucks for me then. Maybe you can take a look at these drivers for g900f too when you get the time.
Click to expand...
Click to collapse
Yeah, running latest Resurrection-Remix-6.0.1, with the adreno drivers and kernel
Resurrection Remix Boeffla14.1beta4 powered SM-G900P
Update coming
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ResurrectionRemix-Boeffla-Venom powered SM-G900P
Related
[KERNEL][4.09][AOSP&SAMMY][APP/PRO/MultiCore] N.E.A.K. S3 - We're Back Again! (v1.4x)
Hi guys, finally the NEAR Team got their GS3's, so we proudly present the brand new N.E.A.K. GS3, completely build from scratch....i'm sure you'll love it!
LOGO AND BANNERS BY zantekk!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Lightest Kernel for the GT-I9300 Ever Made!!
INFOS ABOUT NEAK CONFIGURATOR FREE/PRO: Click Here!
INFOS ABOUT MULTI-CORE MANAGER AND HOW IT WORKS: Click Here!!
CONFIGURATOR APP MADE BY NEAR TEAM (Simone201 & nrk_2k)
MULTI-CORE MANAGER ----->
NEAK FREE APP ----->
NEAK PRO APP (paid) ------>
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU'RE USING MY KERNEL PLEASE ADD ONE OF THESE SMALL BANNERS INTO YOUR SIGNATURE!! THANKS IN ADVANCE!!
(by nrk_2k & zantekk)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Based on sammy update4 sources, updated to 3.0.42
- Governors: PegasusQ (default), Ondemand, LulzactiveV2, Performance, Conservative (module), Lazy (module)
- Schedulers: BFQv4, Noop, SIO, VR (default)
- Using JRCU (++smoothness, ++responsiveness)
- XZ Compression only for KERNEL (--size)
- Fully compatible with: NEAK Apps, Multi-Core Manager, Tegrak's Lulzactive app, Voltage Control, SetCPU, NSTools
RAMDISK AND MISC:
- LED Fade support (thx to teamhacksung)
- Init.d Support :laugh:
- CIFS and FUSE built in the kernel (no modules)
- Android Logger (logcat) already enabled into the kernel
- MULTI-CORE INTERFACE (renewed Tegrak's 2ndCore) -----> CLICK HERE for infos
- CustomVoltage Interface support (thx to Ezekeel - use NSTools for it)
- FSync Control Interface (thx to Ezekeel - incoming infos for it)
CPU/GPU:
- NO OC!!!! (200-1400Mhz)
- CPU Undervolt support (thx to netarchy, Entropy512 & AndreiLux, rebased by me)
- Complete control of freqs/voltages with Voltage Control/SetCPU/NeakPro
- GPU Overclock/Undervolt & Stepcount Interface (by gm & AndreiLux)
- Charging current interface support (original by gm, ported by me) ----> AC, USB, MISC and DOCK supported
- Speedmod Sharpness fix (thx to hardcore)
- Brightness Curve Mod (thx to gm)
MEMORY & PERFORMACES:
- ARM CPU Topology + Sched_MC (can be enabled via NEAK App, disabled by default)
- SLQB Memory Allocator (better memory management)
- Improved memory management functions
- Allow CPU Unaligned access (++performaces)
- Reduced a bit the debug (still need to strip it down for real)
- AFTR ARM Idle Mode (enable via NEAK App) (++battery)
CONNECTIVITY TWEAKS:
- Stochastic Fair Blue NET Scheduler
- Reduced debugging WiFi/BT
- TCP/IP Tweaks
- TCP buffer tweaks
OPTIMIZATIONS:
- COMPLETELY REMOVED THE WHOLE DEBUGGING SYSTEM (++speed, --size)
- Heavily Optimised TouchBooster logic :good:
- SW Sync framework support
- Using Standalone Hotplug driver with non-hotplug governors (thx to gm)
- 3 CPU cores OFF when screen is locked (thx to arighi for original implementation)
- Upstream patches and fixes from Linux 3.2/3/4/5 mainline kernel
- Compiled with Linaro GCC 4.7 + NEAK CFLAGS (heavily optimised) + Graphite Optimisations
- Optimised EXT4 filesystem
- Generally optimised code (removed useless functions and variables, fixed warnings)
and many others...
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- MULTI-CORE INTERFACE (features also Multi-Core Manager App)
- NEAK CONFIGURATOR APP (FREE and PRO - Check out Play Store)
- NO COMPRESSION for Ramdisks
- CustomVoltage and FSync Control interfaces (thx to Ezekeel)
- Tweaked PegasusQ, Ondemand, lulzactive and lazy governors
- Tweaked BFQ, SIO and VR Schedulers for NAND devices
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
v1.4x SAMSUNG FWs + MIUI Zip: Click Here
v1.4x SAMSUNG FWs + MIUI TAR: Click Here
v1.4x AOSP/AOKP/CM9/10 Zip: Click Here
v1.4x AOSP/AOKP/CM9/10 TAR: Click Here
Click to expand...
Click to collapse
DON'T FORGET TO SUPPORT MY WORK WITH A SMALL DONATION! LINK IN MY SIGNATURE!!
NEAK CONFIGURATOR PRO APP DOWNLOAD LINK:
NEAK CONFIGURATOR APP FREE DOWNLOAD LINK:
MULTI-CORE MANAGER APP FREE DOWNLOAD LINK:
OLD DOWNLOADS:
v1.3x SAMMY:
ZIP: http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.3x-SAMMY.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.3x-SAMMY.tar&can=2&q=
v1.3x AOSP:
ZIP: http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.3x-AOSP.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.3x-AOSP.tar&can=2&q=
Code:
v1.2x SAMMY:
ZIP: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.2x-SAMMY.zip&can=2&q=[/url]
TAR: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.2x-SAMMY.tar&can=2&q=[/url]
v1.2x AOSP:
ZIP: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.2x-AOSP.zip&can=2&q=[/url]
TAR: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.2x-AOSP.tar&can=2&q=[/url]
v1.1x SAMMY:
ZIP: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.1x-SAMMY.zip&can=2&q=[/url]
TAR: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.1x-SAMMY.tar&can=2&q=[/url]
v1.1x AOSP:
ZIP: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.1x-AOSP.zip&can=2&q=[/url]
TAR: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.1x-AOSP.tar&can=2&q=[/url]
v1.0x SAMMY:
ZIP: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.0x-SAMMY.zip&can=2&q=[/url]
TAR: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.0x-SAMMY.tar&can=2&q=[/url]
v1.0x AOSP:
ZIP: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.0x-AOSP.zip&can=2&q=[/url]
TAR: [url]http://code.google.com/p/neak-kernel-sgs3/downloads/detail?name=N.E.A.K-S3-1.0x-AOSP.tar&can=2&q=[/url]
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BUG TRACKER (write here your bug reports!!): Click Here
KNOWN BUGS:
- None for latest release (yet)
- Please don't complain if there are any kind of problems on CM10, it works perfectly but if the rom is bugged i can't do anything
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
v1.4x (AOSP&SAMMY):
KERNEL:
- Updated to Linux 3.0.42
- Updated sources to Update4 (works with newer ics sammy firmwares)
- Updated BFQ Scheduler V4
- mali: added GPU OC frequencies
- mali: reduce utilization sampling timeout (thx to AndreiLux)
- pegasusq: tweaks and parameters from speedmod (++ battery)
- pegasusq: update sampling rate without waiting for next sampling
- an30259a: don't restrict led brightness in user case (thx to codeworkx)
- f_mtp_samsung: revert to update2 sources to get MTP working on OSX (thx to gm)
- s3cfb: asynchronous vsync notification (thx to codeworkx)
- sched: Ensure cpu_power periodic update
- sched: use cpu capacity to decide if a ILB is needed
- sdhci: Remove Samsung's broken hack (thx to Entropy512)
- ARM: disable preemption in machine_shutdown
- fs: switch do_fsync() to fget_light() (thx to franciscofranco)
RAMDISK:
- aosp: updated CM9 ramdisks
- aosp: updated CM10 ramdisks
- aosp: added JB adbd
MISC:
- defconfig: fixed mmc initialising for all ROMs (fixes sdcards into CM10)
Click to expand...
Click to collapse
v1.3x (AOSP&SAMMY):
- Updated to Linux 3.0.39
- bcmdhd: update wireless driver to 1.15.15 (fixes wifi drops, thx to gm)
- bcmdhd: Change packet filter settings to block multicast
- mdnie: updated Speedmod mDNIe tweaks (thx to hardcore)
- Fix adb root command
- ramdisk-aosp: updated CM9 and CM10 ramdisks
- ramdisk-samsung: updated from LG8 firmware
Code:
v1.2x (AOSP&SAMMY):
- Updated to Linux 3.0.37
- mms_ts: TouchBooster: freq set to 700Mhz
- mms_ts: TouchBooster: use policy->max freq if it is less than kernel default (fixes using of touchbooster freq while using heavy underclock)
- mms_ts: TouchBooster: don't lock freq if current freq (policy->cur) is > of the touchbooster freq (avoids any kind of stuttering while using heavy tasks and games)
- Compiled with Linaro GCC 4.7 + NEAK CFLAGS (heavily tweaked) + Graphite Optimisations
- cpufreq: pegasusq: using some stock values (improves battery with same smoothness)
- Completely removed exFAT modules (++stability, -size)
- Completely disabled any kind of debug (++speed, --size)
- cm36651: increasing light sensor polling interval
- max17047_fuelgauge: increasing battery polling interval
- Updated tweaks from SpeedMod kernel (thx to hardcore)
- Removed some more debugging from some modules (thx to hardcore)
- [U]Preliminary support for CM10 (Android 4.1.1) ---> see known bugs[/U]
- Small fix in NEAK CFLAGS
- Preliminary support for CM10 (Android 4.1.1) ---> see known bugs
v1.1x (AOSP&SAMMY):
- Updated sources to Samsung Update3 (fixes camera on LFB and up firmwares)
- mdnie: sharpness tweaks by hardcore
- mms_ts: using 600Mhz as TouchBooster freq (+battery)
- mali: disable mali_runtime_resume (thx to gm)
- cpufreq: voltages rounding (thx to AndreiLux)
- sched: Folding nohz load accounting more accurate (+performance)
- pegasusq: tweaking for responsiveness and battery life
- wakelock: (tungstwenty's implementation) expanded deleted wakelocks
- wakelock: main_wake_lock fix by tungstwenty
- Tweaked SIO scheduler (thx to AndreiLux)
- ramdisk: using idle-only mode as default (temporary fixes crackling sound)
- ramdisk: creating init.d folder if it doesn't exist
- ramdisk: updated sammy ramdisks from latest LFB firmware
v1.0x (AOSP&SAMMY):
- Based on Samsung Update1 sources, updated to Kernel 3.0.36
- NO OC!!! (200-1400Mhz)
- Governors: pegasusq (default), ondemand, performance, lulzactive, conservative (module), lazy (module)
- Schedulers: VR (default), BFQ-v3r4, NOOP and SIO
- UV Interface for ARM and INTERNAL voltages
- GPU Clock/Voltage control (thx to gm & AndreiLux)
- Stochastic Fair Blue NET Scheduler (better TCP performances)
- CustomVoltage Interface (thx to Ezekeel - use NSTools)
- FSync Control Interface (thx to Ezekeel)
- Multi-Core Control (based on Tegrak's 2nd Core)
- A lot of post-init tweaks
- NEAK APP support
- Init.d support
- Insecure adbd (thx to Chainfire)
- exFAT modules are loaded fine
- XZ compression optimised
- No Ramdisk compression (fast boot)
- Tons of various optimisations taken from other repos (thx to myfluxi, franciscofranco, gm and AndreiLux)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SOURCE CODE (2 branches, dev & master): Click Here
Credits:
- Samsung (original sources)
- Hardcore (screen patches + some scripts)
- Gokhanmoral (patches + some scripts)
- netarchy (GPU OC/UV + conservative patch)
- Entropy512 (many fixes & patches)
- Tegrak (lulzactive + original 2nd core)
- Cattleprod (some fixes and patches)
- Linaro (arm topology + compiler)
- myfluxi (many patches!)
- AndreiLux (patches and misc)
- franciscofranco (patches)
- Ezekeel (CustomVoltage & FSyncControl)
and many others that have helped or supported me!
by Simone201 & NEAR Team :good::good:
For MULTI-CORE MANAGER Help/FAQ
Another one just in case....
I can use this on xlite rom v7?
Sent from my Transformer Prime TF201 using xda premium
DamBadz said:
I can use this on xlite rom v7?
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Sure, check if it is sammy or aosp based and select neak version that u need :good:
Have used your awesome kernels on s2 .. Thanks for making kernel for s3 also ..
Sent from my GT-I9300
doesn't work on Foxhound 0.6 rom, it boots up to the sim-pin screen and then reboots.
On Slim ICS the kernel works without any problems
Really nice thanks!!!
Sent from my GT-I9300 using xda app-developers app
Many thanks.
Flashing now!
edgarf28 said:
doesn't work on Foxhound 0.6 rom, it boots up to the sim-pin screen and then reboots.
Click to expand...
Click to collapse
If it boots fine then there is something wrong in the post-boot process, like scripts and similars....please cleanup anything related to this
I have tried by myself the kernel on the newest firmwares and works flawlessly
Will try it.
Sent from my GT-I9300 using Tapatalk 2
It sammy right? Thx
Sent from my Transformer Prime TF201 using xda premium
DamBadz said:
It sammy right? Thx
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
yeah, go for sammy
simone201 said:
yeah, go for sammy
Click to expand...
Click to collapse
Yap,finally :laugh:
Welcome simone!!!
I will add your kernel in my REF soon
simone201 said:
yeah, go for sammy
Click to expand...
Click to collapse
Thx mate
Sent from my GT-I9300 using xda premium
finally its here, thank u!!!
Will try it via mobile Odin... :thumbup:
*** Powered by CheckROM EvoHD™ V2 ***
Just flashed it on Omega v7.0...seems to be working fine
sent from my HTC One X or SGS III using xda premium
Thanks all you guys for the great welcome here!!
I hope you enjoy my kernel as much as i do
simone201 said:
If it boots fine then there is something wrong in the post-boot process, like scripts and similars....please cleanup anything related to this
I have tried by myself the kernel on the newest firmwares and works flawlessly
Click to expand...
Click to collapse
How can I cleanup the scripts etc.?
I've done a wipe cache and dalvik cache in CWM before flashing your kernel, but it doesn't work. :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Lightest Kernel for the Galaxy Note 2 Ever Made!!
INFOS ABOUT uNEAK ENGINE APP: Click Here!!
INFOS ABOUT uNEAK OTA UPDATER (included in uNEAK Engine): Click Here!!
INFOS ABOUT uNEAK WOLFSON AUDIO CONTROL (included in uNEAK Engine): Click Here!!
uNEAK Engine CODED BY SIMONE201
uNEAK ENGINE (free) ----->
--- uNEAK ENGINE Pro Key ----->
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU'RE USING MY KERNEL PLEASE ADD ONE OF THESE SMALL BANNERS INTO YOUR SIGNATURE!! THANKS IN ADVANCE!!
(by nrk_2k & zantekk)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Based on Samsung official sources (updated to N8000u7), updated to 3.0.96
- Governors: PegasusQ (default), Ondemand, LulzactiveV2, Performance, Conservative (module), Lazy (module)
- Schedulers: BFQv6r2, Noop, SIO, VR (default)
- Using JRCU (++smoothness, ++responsiveness)
- XZ Compression only for KERNEL (--size)
- Fully compatible with: uNEAK ENGINE, MC Manager, Tegrak's Lulzactive app, Voltage Control, SetCPU, NSTools
- Fully compatible with 4.1.2 ROMs
- Fully compatible with 4.3 AOSP roms
- Fixed exynos-mem bug exploit (thx to Sammy)
- Fixed SDS death bug (thx to Sammy)
- Wolfson Audio Control (thx to AndiP for the implementation) ----> featured in uNEAK Engine
RAMDISK AND MISC:
- LED Fade support (thx to teamhacksung)
- Init.d Support :laugh:
- CIFS and FUSE built in the kernel (no modules)
- Android Logger (logcat) already enabled into the kernel
- Multi-Core Interface (renewed Tegrak's 2ndCore) -----> CLICK HERE for infos
- FSync Control Interface (thx to Ezekeel - featured into uNEAK Engine)
- TouchBooster Control (thx to franciscofranco)
- CM10.2 and derivates support (AOSP)
CPU/GPU:
- NO OC!!!! (200-1600Mhz)
- CPU Undervolt support (thx to netarchy, Entropy512 & AndreiLux)
- Complete control of freqs/voltages with Voltage Control/SetCPU/uNEAK
- GPU Overclock/Undervolt & Stepcount Interface (by gm & AndreiLux)
- Charging current interface support (original by gm, ported by me) ----> AC, USB, MISC and DOCK supported
MEMORY & PERFORMACES:
- ARM CPU Topology + Sched_MC (can be enabled via uNEAK Engine, disabled by default)
- SLQB Memory Allocator (better memory management)
- Improved memory management functions
- Allow CPU Unaligned access (++performaces)
- AFTR ARM Idle Mode (enable via uNEAK Engine) (++battery)
CONNECTIVITY TWEAKS:
- Stochastic Fair Blue NET Scheduler
- Veno TCP Congestion Control algorithm
- Proportional Rate Reduction for TCP
- Reduced debugging WiFi/BT
- TCP/IP Tweaks
- TCP buffer tweaks
OPTIMIZATIONS:
- exFAT OpenSource Drivers (Thx to Sammy) --> support for >32GB sdcards
- Heavily reduced debug system (logcat and last_kmsg support is still there) (++speed, --size)
- Heavily Optimised TouchBooster logic :good: ----> greatly improved smoothness
- SW Sync framework support
- Using Standalone Hotplug driver with non-hotplug governors (thx to gm)
- 3 CPU cores OFF when screen is locked (thx to arighi for original implementation) ----> with non-hotplug govs
- Upstream patches and fixes from Linux mainline kernel
- Compiled with Linaro GCC 4.7 (2013.08) + NEAK CFLAGS (heavily optimised) + Graphite Optimisations + O3 Optimisations
- Optimised EXT4 filesystem
- Generally optimised code (removed useless functions and variables, fixed warnings)
and many others...
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- uNEAK ENGINE APP (available for free - Check out Play Store)
- uNEAK OTA Updater (included into uNEAK Engine)
- uNEAK Wolfson Sound Control (included in uNEAK Engine)
- TouchWake (included in uNEAK Engine)
- Kernel LED Alerts (included in uNEAK Engine) -----> INFOS HERE (incoming)
- Multi-Core Interface (features also Multi-Core Manager App)
- NO COMPRESSION for Ramdisks
- FSync Control interface (thx to Ezekeel)
- Tweaked PegasusQ, Ondemand, lulzactive and lazy governors
- Tweaked BFQ, SIO and VR Schedulers for NAND devices
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
N7100 GSM RELEASES:
v2.2x SAMSUNG FWs & Derivates Zip: Click Here
v2.2x SAMSUNG FWs & Derivates TAR: Click Here
v2.2x CM10.2 (4.3) & Derivates Zip: Click Here
v2.2x CM10.2 (4.3) & Derivates TAR: Click Here
Click to expand...
Click to collapse
N7105/T889/I317 LTE RELEASES:
v2.2x SAMSUNG FWs & Derivates Zip: Click Here
v2.2x SAMSUNG FWs & Derivates TAR: Click Here
v2.2x CM10.2 (4.3) & Derivates Zip: Click Here
v2.2x CM10.2 (4.3) & Derivates TAR: Click Here
Click to expand...
Click to collapse
DON'T FORGET TO SUPPORT MY WORK WITH A SMALL DONATION! LINK IN MY SIGNATURE!!
uNEAK ENGINE APP DOWNLOAD LINK:
uNEAK ENGINE PRO KEY DOWNLOAD LINK:
OLD DOWNLOADS:
Check Here: http://code.google.com/p/neak-kernel-note2/downloads/list
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BUG TRACKER (write here your bug reports!!): Click Here
KNOWN BUGS:
- Charging LEDs may not work if led alerts and triggers are enabled (only AOSP)
- Kernel Version --> Unavailable (AOSP, not a problem actually)
Please don't report any of the known bugs, or your post will be deleted asap
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
v2.2x (AOSP&SAMMY):
KERNEL:
- Updated to Linux 3.0.96
- Added exFAT support (thx sammy for the opensource drivers)
- mmc: fix the workqueue overload battery waste
- cypress: report led status via sysfs
- smdk4412: max77693_haptic: move sysfs node
- max77693_haptic: disabling DEBUG flag
RAMDISKS:
- CM10.2 (Android 4.3) support (AOSP)
- NO MORE CM10.1/4.2.2 SUPPORT IN AOSP!!
Click to expand...
Click to collapse
Code:
v2.1x (AOSP&SAMMY):
- Updated to Linux 3.0.87
- Updated BFQ scheduler to BFQv6r2
- charge_current: ignore unstable power and margin options (thx to AndreiLux)
- bcmdhd: updated from I9500U2 sources
- touch_wake: version 1.1 (thx to Yank555)
- Updated AOSP ramdisks from latest cm nightly
- defconfig: enabled SELinux support (AOSP)
v2.0.2x (AOSP&SAMMY):
- Fixed LED notifications issues
- The default LED trigger is now "none" (aka Disabled), please use the app to configure the LED Alerts
v2.0.1x (AOSP&SAMMY):
- Updated to Linux 3.0.80
- Fixed CPU stuck at max frequency
v2.0x (AOSP&SAMMY):
- Updated to Linux 3.0.79
- Fixed WiFi issues (and tethering)
- VENO TCP congestion control algorithm
- misc: TouchWake --> featured in uNEAK Engine (from v2.0)
- misc: Kernel LED Alerts --> see above for infos, featured in uNEAK Engine (from v2.0)
- Enabled CONFIG_AIO
- Various sched patches (AndreiLux)
- Linaro O3 Optimisations
v1.9x (AOSP&SAMMY):
- Updated to Linux 3.0.74
- bcmdhd: wifi drivers from I9500 sources
- mms152_ts: fixing touchbooster bug which may cause being stuck at freq lock (thx to DerTeufel)
- backport: smp: patches from mainline 3.5
- ARM: decompressor: Enable unaligned memory access for v6 and above
- ea8061: Allow brightness to 300 cd
- Updated from latest sammy rom available
v1.8x (AOSP&SAMMY):
- Updated to Linux 3.0.71
- bcmdhd: wifi drivers from N8000U5 sources (common)
- wolfson_audio: fixed eq issues (+ misc fixes)
- wireless: backport from 3.4
- Upstream android patches
- fbearlysuspend: reduced msleep to 100ms
- drivers: mmc: disable CRC
- mali_r3p1: updated from Note8 sources
- Add frandom(/dev/frandom)
- More entropy tweaks
- timer: hrtimer: Don't check idle_cpu() before calling get_nohz_timer_target()
- sched: Create sched_select_non_idle_cpu() to give preferred CPU for power saving
- usb-gadget: Booting from g_file_storage in cdrom mode
- Updated Linaro toolchain to 2013.03
v1.7x (AOSP&SAMMY):
- Linux 3.0.67
- Updated Wolfson Sound to 1.6.0
- Mali R3P1 drivers (AOSP)
- Updated WiFi drivers (AOSP)
- power: fbearlysuspend draw delay (400ms) ---> fixes CRT on sammy roms
- rwsem: steal writing sem for better performance
- tmpfs: fix mempolicy object leaks
- No more support for CM10 (AOSP)
- Updated CM10.1 ramdisks
v1.6x (AOSP&SAMMY):
- Should solve all the battery drain issues (hopefully)
- Reverted some patch related to cpuidle and workqueue
- Dynamically adjust cpufreq_max_limit according to scaling_max (Yank555)
- Updates and refactorings of post-init tweaks (thx to dorimanx)
v1.5x (AOSP&SAMMY):
6th Release
v1.4x (AOSP&SAMMY):
5th Release
v1.3x (AOSP&SAMMY):
4th Release
v1.2x (AOSP&SAMMY):
3rd Release
v1.1x (AOSP&SAMMY):
2nd Release
v1.0x (AOSP&SAMMY):
1st Release
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SOURCE CODE (2 branches, dev & master): Click Here
Credits:
- Samsung (original sources)
- Hardcore (screen patches + some scripts)
- Gokhanmoral (patches + some scripts)
- netarchy (GPU OC/UV + conservative patch)
- Entropy512 (many fixes & patches)
- Tegrak (lulzactive + original 2nd core)
- Cattleprod (some fixes and patches)
- Linaro (arm topology + compiler)
- myfluxi (many patches!)
- DerTeufel (patches and misc)
- AndreiLux (patches and misc)
- franciscofranco (patches)
- Ezekeel (FSyncControl)
- AndiP (Boeffla Sound)
- Yank555 (patches & help)
- Reb0rn (amazing tester)
and many others that have helped or supported me!
by Simone201 :good::good:
XDA:DevDB Information
N.E.A.K. Kernel for Note 2, a Kernel for the Samsung Galaxy Note II
Contributors
simone201
Kernel Special Features: uNEAK Engine, Wolfson Audio Control, TouchWake, NEAK Smart Response, Amazing battery life
Version Information
Status: Stable
Current Stable Version: 2.2x
Stable Release Date: 2013-09-15
Created 2013-09-15
Last Updated 2013-11-03
One reserved (at least)
Will try this for fun for my build, seen your development on your git
Skickat från min GT-N7100 via Tapatalk 2
looking good will give this a try shame there is no overclock
strikerdj2011 said:
looking good will give this a try shame there is no overclock
Click to expand...
Click to collapse
you won't regret of no OC, it is kinda useless when a kernel is heavily optimised :good:
simone201 said:
you won't regret of no OC, it is kinda useless when a kernel is heavily optimised :good:
Click to expand...
Click to collapse
This. Have been following your work since galaxy s days. Roms then kernels. Good work mate and no need of oc when its note 2 coupled with simones tweaks
Awesome. Used your kernel on my old S2 i9100 :good:
One question: The .tar can be flashed with odin even if I don't have cwm installed?
darkchazz said:
Awesome. Used your kernel on my old S2 i9100 :good:
One question: The .tar can be flashed with odin even if I don't have cwm installed?
Click to expand...
Click to collapse
Yes it has to be flashed with odin
Looks promising. On my test list for tomorrow
Finally replaced the logos with Note2 modified ones, if someone has a good new logo to send me, well just contact me!
Want to see some feedbacks tho
Looks interesting. Now I just need to figure out what rom I should flash
/CK
exFAT support is broken... That's very bad...
take back what i said about the overclocking this is a fast kernel like really going to enjoy using this one great work
Sweeeeet!
Sent from my GT-N7100 using Tapatalk 2
The best kernel for I9100 is now available on my N7100 . Definitely going to give it a try. Glad to see good developers working on Note 2 !
j-a-c-k said:
exFAT support is broken... That's very bad...
Click to expand...
Click to collapse
I will never support exFAT sorry, this is because i want to use SLQB memory allocator, otherwise i should use SLUB for exFAT, but that's not what i want for NEAK
Just flashed it on....all i can say the best kernel for Note2.......awesome work guys + the tweak apps from Google Play it rocks
Strange I flashed this and my phone start lagging like crazy??? Do I need to uninstall set cpu???
Sent from my GT-N7100 using XDA Premium HD app
Jeshter2000 said:
Strange I flashed this and my phone start lagging like crazy??? Do I need to uninstall set cpu???
Sent from my GT-N7100 using XDA Premium HD app
Click to expand...
Click to collapse
Remove any apps that may control the cpu, also clean up your init.d folder please
Because this is IMPOSSIBLE
About FS
simone201 said:
I will never support exFAT sorry, this is because i want to use SLQB memory allocator, otherwise i should use SLUB for exFAT, but that's not what i want for NEAK
Click to expand...
Click to collapse
Then your kernel can mount microsd in ext4/3/2 or NTFS?
Thanks in advance & sorry for my English.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Emotion nightly Kernel Note 4 -SM-N910V
Developed by Placiano and Pafcholini
Introduction
Introducing the Emotion Revolution Roms & Kernels for Android Devices.
Emotion Rom/Kernel is a modified, aftermarket firmware/Kernel distribution few Android devices (Note 2, Note 4, HTC M7, Newman N2). Based on the Android Open Source Project , Emotion Rom & Kernel is intended to increase performance and stability over Android-based Devices released by sellers, for example, Samsung, HTC and so forth. Emotroid additionally offers a mixed bag of features & improvements that are not presently found in stock variants of Android.
*** Disclamer***
Your warranty is now void.
We are not responsible for any damage or problems you may have!
YOU are choosing to make these modifications.
Click to expand...
Click to collapse
Thread IndeX
POST 1: Kernel Information, Changelog, Credits,Screenshots
POST 2: Synapse, Recommended settings, FAQ, etc.
POST 3: Know/Reported issues
Request new features here
Features:
Based on Samsung Open Source XXU1BOB4
Compiled with Toolchain Linaro GCC 4.9.3 2015.02 Cortex A15
Linux version 3.10.40
OC/UC -> 3072MHz / 268MHz
PowerSuspend Driver
Intelli-Plug V4.0
KSM enabled
Sweep2wake
Simple GPU Algorithm
Voltage Control
Intelli-Thermal
KCAL - Advanced color control
Led Control
CRC Settings
Advanced TCP control
S-View flip cover hack
Selinux Permissive
Sched: LOAD_FREQ (4*HZ+61)
Reduced wakelocks
Frandom number generator
Synapse full support
Governors: interactive_pro, intelliactive, bluactive, conservativex, alucard,darkness, nightmare, smartassV2, ondemandplus, umbrella_core, yankactive, dancedance, bioshock, lionhearth, conservative, interactive, ondemand,powersave, userspace, performance
I/O Scheldures: bfq, vr, fiops, zen, fifo, sio, test-ioshed, cfq, row, deadline, noop
Click to expand...
Click to collapse
April- 14 -2015 nightly r9
-Back to Linux 3.10.40 (For now, we are working to bring stable 3.10.73)
-Added Intelli-thermal v3.0
-bcmdhd4358: filter multicast packages while suspended
-fs/namei.c: fix potential memory leak in path_lookupat
-pinctrl: msm: fixed potential NULL pointer dereference
-usb: ks_bridge: by default debugging is disabled
-slub: fix kmem_cache_shrink return value
-mm: slub: fixed format mismatches in slab_err() callers
-power:Enable/Disable power collapse after camera open
-Implemented CPU Core Control by andip71
-tick: don't update idle time if cpu offline
-msm: kgsl: Only wake GPU on multitouch events
-Interactive: don't boost cpu if already boosted
-rtc: qpnp-rtc: Sets RTC time correctly
-rtc: qpnp-rtc: Set alarm control register properly
-Added Mobile Storage Analyzer
-soc: mbhc: Fix ID Tech card reader detection
-power: catch wake-up requests in suspend_again
-pinctrl: msm: prevent bogus wake up from suspend
-asoc: wcd9xxx: Improved headset detection
-Implemented Motorola MSM memcpy enhancements "memutils" (Faster memcpy performance for Krait)
-Improved Memutils
-Added CIFS as module
-Adde NTFS as module
-ASoC: msm: qdp6v2: handle proxy read failure
-ASoC: msm: qdsp6v2: Fix timestamp query during gapless transition
-mmc: core: Update PON (Power Off Notification) based on the system state
-mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
-netfilter: IDLETIMER: fix invalid deference of timer
-Fixes and improvements in Synapse
-Added CPU Binning (pvs information) Synapse> CPU VOLTAGE
-Added CPU core control in Synapse> CPU DRIVERS
-For more info check our Github
March- 27 -2015 nightly r8
-Linux update to 3.10.71
-Powesuspend updated to 1.7
-Intelli-plug updated to 4.0
-OC/UC -> 3072MHz / 268MHz
-Added Hardlimit Control
-Added new governors
-Addeded new scheldures
-Added memcopy & string use glibc version
-Added quickwakeup driver (improve battery life)
-Optimized Kernel Samepage Merging (KSM)
-deadline: Optimized for non-rotational
-mm: Clear page active before releasing pages
-ARM: 8119/1: crypto: sha1: add ARM NEON implementation
-ARM: 8120/1: crypto: sha512: add ARM NEON implementation
-ARM: crypto: add NEON accelerated XOR implementation
-ARM: add support for kernel mode NEON and only allow kernel mode neon with AEABI
-Fixed failure to enter PS mode while roaming
-Sched: Set MC (multi-core) sched domain's busy_factor attribute to 1
-Disabled add_random for more performance on SSD's
-tcp: enabled tcp fast open functionality (franciscofranco)
-For more info check our Github
March- 5 -2015 nightly r7
-Added KCAL - Advanced color control (Thanks to @savoca for his great job) check this thread for more info
March- 3 -2015 nightly r6
-Based on XXU1ANK4 (KitKat version) and compatible with "F,G,T,V,W8"
-Based on XXU1BOB4 (Lollipop version) and compatible with "F"
-Lollipop version has all the features except mdnie control and S-View hack
-Kernel compiled with Linaro Toolchain 4.9.3 2015-02
-FauxSound updated to 3.6
-Fixed some issues in FauxSound and Synapse
-cpufreq: Introduced new relation for freq selection Introduce CPUFREQ_RELATION_C
-Interactive Governor: Use CPUFREQ_RELATION_C
-Added Gentle fair sleepers (Synapse -> KERNEL TWEAKS)
-Enabled Kernel SamePage Merging (KSM) (Synapse -> KSM)
-Added key disabler (Synapse-> SCREEN/MISC)
-Added userspace vibration strength control (Synapse-> SCREEN/MISC)
-Changed some stuff in Synapse
-Reverted some commits
-Another minor changes
January- 27 -2015 nightly beta r5
-FauxSound implemented
-FauxSound in Synapse
-Added high performance mode in Synapse->Sound
-Fixed battery drain on wifi (My fault)
-Reverted another commits
January- 16 -2015 nightly r4
-Fixed cpu voltage control (No more 0MHz frequency in cpu voltage table)
-ASoC: wcd9xxx: use hwdep node for codec calibration
-ASoC: wcd9320: use hwdep nodes to get calibration
-ASoC: wcd9xxx: Changes for High performance mode
-ASoC: wcd9xxx: Change PA on and VDDIO switch sequence
-ASoC: wcd9xxx: Avoid micbias glitches during audio playback
-In conclusion better quality sound on headsets
-Sched/fair: reduced latency
-Decreased DHD_PACKET_TIMEOUT_MS to 250 ms (Before 500ms)
-Drecreased time to enter sleep
-Net: wireless: Increased scan entry expiration to fit new scan time
-PM: devfreq: Use high priority workqueue
-Msm: kgsl: Report correct GPU frequency in sysfs
-Some minor changes
January- 11 -2015 nightly r3
-Added Frandom as module and set by default (Synapse>I/O>Frandom) "For more info check this"
-Network speed tweak
-Reduced wakelocks "wlan_rx_wake" and "wlan_ctrl_wake"
-dtsi: realigned voltages with userspace values (Thanks to twistedumbrella)
-cpu-boost more performance (Thanks to franciscofranco)
-sched: LOAD_FREQ (4*HZ+61) "For more info check this"
-Interactive governor imported from the Nexus 6 (No more lag on interactive)
-Added bluactive and interactive_pro governors
-Reverted some changes that made the kernel laggy in some cases.
-Selinux set to permissive by default
-Gpu: msm: for higher priority you want to use nice level of -7
-Now you can change the governor tunables from Synapse (Issue fixed) (Thanks for the tip to AndreiLux)
-Synapse shows all the available gpu governors (Thanks to my friend Friedrich!)
-Cleaned some things in Synapse
-Other minor changes
January- 4 -2015 nightly r2
-Fixed Ondemand governor
-mm: slub: Default slub_max_order to 0 (Improved performance)
-Increased io performance
-writeback: fix occasional slow sync
-Fixed min frequency (Finally!)
-msm: Fix high load average from uninterruptible waits
-Cpu boost sysfs to enable/disable it (Synapse>cpu drivers)
-S-View hack (Twistedumbrella) enable/disable (Synapse>miscellaneous)
-Minor fixes
January- 1 -2015 nightly r1
-Based on Samsung Open Source N910FXXU1ANIE
-Compiled with Toolchain Linaro GCC 4.9.3 2014.12 Cortex A15
-PowerSuspend Driver
-Intelli-Plug V3.9
-Stereo Call Recording Support
-cpufreq_limit: don't override cpu min frequency
-Fast Charge V1.2
-Sweep2wake
-Simple GPU Algorithm
-Sysfs interface to Enable/Disable Logger Android (Default disable)
-Voltage Control
-Intelli-Thermal V1
-mDNIe Hijack control
-Advanced TCP control (westwood default)
-Sysfs interface to Enable/Disable CRC
-Dynamic Fsync Control V1.5
-Added Intelliactive, Smartmax and SmartassV2 governors
-Led Control
-Panel Color Control
-mDnie mode adapter for Synapse
-Selinux Enforcing/Permissive
-Synapse Support
Click to expand...
Click to collapse
Installation instructions
You need to have TWPR, CWM o Philz Recovery.
Download the last kernel
Reboot in recovery mode
Make backup (recommended)
Flash the zip
Downloads
Strictly No Mirrors Please. In the event that you need to make one ask us first with purpose behind what valid reason.
Current Version
After flash the kernel (LL version) go to play store and download Synapse apk.
App to control your display : Color Control
Emotion nightly r9 LL (Mediafire)
Old version
Emotion nightly r8 LL (Mediafire)
Nadia nightly r7 LL (Mediafire)
Nadia nightly r7 KK (Mediafire)
Nadia nightly r6 LL (Mediafire)
Nadia nightly r6 KK (MEGA)
Nadia nightly beta r5 (Mediafire)
Nadia nightly r3 (Mediafire)
Nadia nightly r4 (MEGA)
Nadia nightly r4 (AndroidFileHost)
Nadia nightly r3 (Mediafire)
Nadia nightly r3 (MEGA)
Nadia nightly r3 (AndroidFileHost)
Nadia nightly r2 (Mediafire)
Nadia nightly r2 (MEGA)
Nadia nightly r2 (AndroidFileHost)
Nadia nightly r1 (Mediafire)
Nadia nightly r1 (MEGA)
Nadia nightly r1 (AndroidFileHost)
Click to expand...
Click to collapse
Source code:
Emotion kernel Github
Thanks To/Credits
Andip71, AndreiLux, apb_axel, Civato, Christopher83, DerTeufel, Faux123, Ffolkes, Flar2, Franciscofranco, Franlov, Friedrich420, Gokhanmoral, Infernum, LoungeKatt (TwistedUmbrella), savoca, _Sofos_, Vanito, Yank555.lu, ZaneZam.
I hope I have not forgotten anyone!
Hit the "thanks" button if you like our work.
You can follow new updates here (Spanish)
Recommended settings & FAQ Synapse and all available options:
- LIVE STATISTICS: Time in states, Uptime,etc.
- CPU - GOV: cpu scaling, cpu governor and governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling min/max frequency, GPU governor, Simple GPU Algorithm.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead, Frandom Module, Scheldure Tunables Internal/External
- CPU DRIVERS: PowerSuspend and Intelli-Plug
- THERMAL: Intelli-Thermal Control
- MISCELLANEOUS: Dynamic FSYNC Driver, Logger Mode, CRC Settings, S-View bypass, Selinux Status, Optimize Database.
- BATTERY: Live Statistics and Fast Charge
- MDNIE/SCREEN: Panel Control, mDNIe Mode and mDNIe Mode Hijack
- LED: Led Control
- SCREEN WAKE CONTROL: Sweep2Wake Control
- KERNEL TWEAKS: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BUILD.PROP: Build.prop Tweaks
- LOGS: Clearn Synapse, Logcat and Dmseg
- INFO-REBOOT: info about the kernel, reboots,etc.
Click to expand...
Click to collapse
Balance between performance and battery
Quote:
Above is what I use personally. MAY NOT be optimal for all. Share your settings.
CPU frequency: 2649MHz/300MHz
CPU governor: Intelliactive or Bluactive for performance/ Interactive for battery
CPU voltaje: -25uV ((Be careful!! If you low voltages much you can get bootloop or battery drain.)
GPU: default values
I/O schedulers: row for both
PowerSuspend: hybrid hook
MPDECISION for performance/ Intelli-Plug for battery
Intelli-Thermal: enabled
MISCELLANEOUS: fsync enabled, logger mode disabled, crc disabled (you choice), Selinux Permissive
TCP: westwood for both
Click to expand...
Click to collapse
Aukhan recommended settings
1.
2.
F.A.Q
Can I flash this kernel on Note 4 SM-N910C or other variant?
No, you can not. This kernel is only for SM-N910F, SM-N910G, SM-N910T and SM-N910W8.
When I switch to Ondemand governor I noticed that cpu-boost is disabled.
Exactly, Ondemand and cpu-boost doesn't work well together. When you switch to Ondemand governor cpu-boost will be disabled automatically. Don't re-enable cpu-boost if you are using Ondemand governor. (Synapse>CPU DRIVERS)
Which app can control this kernel?
By default, the kernel is controlled by Synapse, but you can use the app that you like (Trickster Mod, Kernel Tweaker, etc.).
I flashed the kernel and Synapse says: "No support UCI detected".
Reflash the kernel, since it was a bad installation and Synapse does not detect the scripts.
After flashing the kernel lost root what to do?
In case you loose root just flash SuperSU
Any recommended settings to follow using Synapse?
At the beginning of the second post.
After flash the kernel some apks give me FC.
Go to Google Play Store and reinstall those apks.
From where can I remove int.d script?
Go to /system/etc/init.d using any root based file manager and delete.
Note: There is an important one related to superSU and if you remove it by mistake you're gonna have trouble with root permissions.
My device doesn't show any reaction to undervolting (battery life is same as before) or gets unstable even on light undervolting?
Use DVFS disabler Module(standalone) (dynamic voltage and frequency scaling), this feature was kept in touchwiz for benchmark boosting purposes and will conflict with any undervolting and custom governors because it scales the voltages and frequency on regular intervals and is framework integrated, so gets a higher priority than kernel based voltage and scaling controls.
For people who don't know what is DVFS please refer Wikipedia.
Min/Max frequency don't stick?
If your frequency settings don’t stick, it's because on certain Qualcomm devices, there are certain system services (thermald/mpdecision/project butter) or kernel service that rewrite frequency settings based on current thermal status and/or touch input.
I made a logcat but my file is empty. How I can "fix" it?
By default Android logger is disable. Go to Synapse > MISCELLANEOUS and enable Logger Mode.
What is it PowerSuspend?
This new powersuspend PM kernel driver is a replacement for it and existing early_suspend drivers. It should give better battery life.
What is it Intelli-Plug?
Intelliplug is a replacement for mp decision. Intelli-Plug is Faux123 open source solution to Qualcomm's closed source mpdecision. Intelli-Plug is disable by default. It conflicts with mpdecsion, so is HIGHLY recommend turning off mpdecision when using intelli-plug! (If you use Synapse the change is automatic. If you enable Intelli-plug mpdecision will turn off).
What is it Intelli-Thermal?
an intelligent MSM thermal throttling kernel driver designed to replace the
closed sourced thermald(aemon) from Qualcomm.
What is it Frandom?
Frandom is a kernel random number generator, which is 10-50 times faster than what you get from /dev/urandom. And it uses very little (/dev/frandom) or none (/dev/erandom) of the kernel's entropy pool, so it is very useful for applications that require a handy source for lots of random data.
What is it CRC?
CRC is a mechanism aiming to prevent data corruption when is enabled (reduce the performance around 30%). So if you disable it improve the performance but your data can be corrupted. Use it at your risk.
/sys/module/mmc_core/parameters/crc
Know/Reported/Fixed issues Know issues
1. Synapse doesn't show CPU governor tunables.
I'm trying to fix it. FIXED
2. Sometimes Synapse (and others kernel control apks) show that the min frequency is 1190MHz (or other frequency).
Just cancel it. FIXED
3. Ondemand doesn't work well. FIXED
Thanks for the report @Vangelis13
Any other Issues you may Report us and we will fix it
Reserverd
Currently its confirmed that its runing fine on Developer Edition by @manbat thanks to him.
If anybody else has tried it on a non developer Edition please let us know since we do not have a V Variant Device We wont be able to test.
Kindly report.
First! Sweet my first...first.lol
Have been running for a few days on my DE...runs great !!!
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
manbat said:
Have been running for a few days on my DE...runs great !!!
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
Click to expand...
Click to collapse
Glad to know it's running rock solid.
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
JDevil said:
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
Click to expand...
Click to collapse
=======
No issues with LEDs here....
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
JDevil said:
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
Click to expand...
Click to collapse
Are you using any LED apps? I don't see any issues.
This isn't built using VZW source is it?
bobbarker2 said:
This isn't built using VZW source is it?
Click to expand...
Click to collapse
No...but everything works. Source is listed in OP.
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
R6_KK is up... http://forum.xda-developers.com/showthread.php?p=57886425
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.5.0.trltevzw
manbat said:
R6_KK is up... http://forum.xda-developers.com/showthread.php?p=57886425
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.5.0.trltevzw
Click to expand...
Click to collapse
I'll update the OP tonight.
Sent from my SM-N910F
Thread updated!
After flash the kernel go to play store and install Synapse apk.
Enjoy it!
Changelog
March- 3 -2015 nightly r6
-Based on XXU1ANK4 (KitKat version) and compatible with "F,G,T,V,W8"
-Kernel compiled with Linaro Toolchain 4.9.3 2015-02
-FauxSound updated to 3.6
-Fixed some issues in FauxSound and Synapse
-cpufreq: Introduced new relation for freq selection Introduce CPUFREQ_RELATION_C
-Interactive Governor: Use CPUFREQ_RELATION_C
-Added Gentle fair sleepers (Synapse -> KERNEL TWEAKS)
-Enabled Kernel SamePage Merging (KSM) (Synapse -> KSM)
-Added key disabler (Synapse-> SCREEN/MISC)
-Added userspace vibration strength control (Synapse-> SCREEN/MISC)
-Changed some stuff in Synapse
-Reverted some commits
-Another minor changes
I'm confused why there is a Lollipop version? Is that not for VZW?
Mibuix0r said:
I'm confused why there is a Lollipop version? Is that not for VZW?
Click to expand...
Click to collapse
My Bad I actually though LL was released for this device, I've made the changes now.
Kernel updated!
March- 5 -2015 nightly r7
-Added KCAL - Advanced color control
I'll update the OP later meanwhile you may download it from here
Nadia nightly r7 kk - http://www.mediafire.com/download/d2v2p5l68t4laz8/Nadia-nightly-r7-KK-SM-N910F-G-T-V-W8.zip
Color control - http://www.mediafire.com/download/xj8za53ia2njico/re.codefi.savoca.kcal-v1.1.apk
Sent from my SM-N910F
Sent from my SM-N910F
New Color setting which looks more better try this and post your results.
Make sure you set your Display mode from Settings to Basic and try this
Thanks to @Psycho_666
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
Welcome, this kernel has the principal intention of bring to all of yours all the possible features, without loosing the stock LineageOS Kernel Smoothness, so, in other words this kernel has an excellent performance with tons of features. If you want less things go to G3X-Ultimate Kernel thread. This Kernel is for CM and AOSP ROM's!
Click to expand...
Click to collapse
Features:
Now with AROMA Installer!
• CPU Input Per-Core Boost and Hotplug Boost
• Gov's: Alucard, Bioshock, darkness, impulse, intelliactive, intellitmm, lionheart, nightmare, pegasusq, slim, smartass2, smartmax, tripndroid, wave, yankactive, zzmoove, Yankdemand, Badass, SavagedZen, ElementalX, SmartassH3, DanceDance, Hyper, Adaptive, Blu_plug, Optimax, Mythx_plug and Barry_allen
• Multicore Power Saving
• Fast Charge Support
• MSM_Limiter (Disabled by default)
• Hotplugs: IntelliPlug, Alucard Hotplug, Bricked Hotplug, mako Hotplug, ThunderPlug, MSM Hotplug, Zen Decision and AutoSMP
• IntelliThermal
• GPU: simple_ondemand fixed
• Simple GPU Algorithm
• Adreno idler
• kcal v2 color control
• Sound control
• Arch Power and Gentle Fair Sleepers
• Krait C-States settings
• State Notifier
• I/O Schedulers: row, bfq (default), cfq, deadline, noop, tripndroid, Zen, fiops, sio, fifo and maple
• Fsync control
• Kexec hardboot Patch
• init.d Support
• Selinux Permissive support
• Synapse support
• Cpufreq.c Optimizations
• GPU 27Mhz
• Speed up boot
• Frandom
• Various WiFi tweaks for battery and stability
• Async I/O 34% SSD Perfomance gain
• Removed a lot of useless Debug options
• TouchScreen Boost
• State Notifier
• 3x Faster integer sqrt
• Exposed PVS Level via Sysfs
• 2-Way Stereo Call Recording
• Reduced minimum screen Brightness
• A lot of optimizations
• RAM Optimizations (To avoid apps getting killed... with 3gb of ram lol...)
• Battery optimizations
Features for Stock ROM's:
This version of ArtxKernel for Stock ROM's is mostly focused on get rid of the lag and make the UI responsive and Smooth, so,
dont expect many features, only important things and optimizations (Call it Artx-Lite)
• Updated Interactive governor with Touchboost driver
• Updated CPU-Boost with Per-Core Boost
• GPU use lowest frequency when no load (Better idle battery)
• Fastcharge Support
• Kcal v2 Color control
• Faux123 Sound control
• Lowered backlight min brightness and boosted max brightness (It's safe)
(You can change backlight values in ~/sys/module/lm3697 folder)
• Selinux always permissive
• Fixed simple_ondemand crash
• PVS Level interface
• Frandom Support
• 2-Way Stereo Call Recording Patch
• Disabled Software CRC and can be toggeable
• Use correct sensor for temperature
• More optimizations
----------
If you want less idle battery drain use Greenify
----------
Downloads:
For v6.0 flash MrBump after kernel installation!
MEGA
Social:
Wanna join a LG G3 Development Telegram group? Any User or Developer is welcome!!
If you have any question or you need help, get in! (let me know if the link is broken )
----------
Telegram Group
----------
Compatible with:
(Thanks to @marcdw and @jlb1959.01)
- Nougat ROM's
- Marshmallow ROM's
- Lollipop ROM's (Not confimed yet)
Thanks to:
@cesarandres_8911, @savoca, @faux123, LineageOS Team, @osm0sis, @frap129
@Feinzer, LG, @matthewdalex, @Andrei F, @yarpiin, @Robshr, @amarullz and me
Thanks @Francois Amom for his amazing logo design
If anyone is missing here PM me
I'll be updating these kernels until I've pulished every feature and code :good:
If you like the kernel and want to do a small donation it for sure gonna help me a lot and keep me motivated! :laugh:
Thank you and enjoy it!
XDA:DevDB Information
ArtxKernel, Kernel for the LG G3
Contributors
Stayn, cesarandres_8911
Source Code: https://github.com/Artx-II/kernel_lge_g3
Kernel Special Features: See above
Version Information
Status: Stable
Current Stable Version: 6.0-ArtxKernel
Stable Release Date: 2017-07-27
Created 2017-06-19
Last Updated 2017-10-24
Changelog:
Artx Kernel:
Code:
[B]* v6.0[/B]
- Kernel updated done from Zero, all the features were added again, cleaned a bunch code and pointless "optimizations"
- Removed Voltage control
- Lowered screen Brightness
- Added Zen and AutoSMP Hotplugs
- Fixed controls for Arch power and Gentle fair sleepers
- Added 2-Way Stereo Call recording Patch
- Ram Optimizations (To avoid apps getting killed... with 3gb of ram lol...)
- Modified CPU-Boost, now with Per-Core Boost control and Hotplug Boost
- A lot of fixes for battery drain and overheating
- Fixed all bugs acumulated from v4.1 to v5.0
- General optimzations
- Battery optimizations
[B]* v5.0[/B]
- Updated AROMA Installer to v3.00
- Fixed errors and added full compatibility between AROMA and AnyKernel2
- Added Selinux permissive option in AROMA
- Added Governors: Adaptive, Barry_allen, Blu_active, Mythx_plug and Optimax
- Improved Interactive Gov
- Updated zzmoove
- Added State Notifier
- Added Maple scheduler
- 3x Faster integer sqrt
- GPU Idle Battery tweak
- Added Arch power and Gentle Fair Sleepers (Configurable)
- Added 96Khz Sound support (48Khz before)
- Fixed Selinux always permissive
- Disabled I/O Stats (You can enable it)
- Memory improvement (RAM)
- Exposed PVS level via Sysfs (Or Binning information)
[B]* v4.6[/B]
- Fixed Synapse
- Resolution mod scaled to 1125p
- New Screen colors option in AROMA
- Kernel fixes
[B]* v4.5[/B]
- New AROMA Installer! Thanks to amarullz
- Kernel Fixes
- CTT-MOD in AROMA
- New FastCharge profiles in AROMA
- Screen resolution in AROMA
- Interactive BOOST in AROMA
- More kernel configs in AROMA
[B]* v4.0[/B]
- Updated source
- Cpufreq.c Optimizations
- GPU 27Mhz
- Updated Faux sound
- Updated Voltage control
- Speed up boot
- Added Gov's: Yankdemand, Badass, SavagedZen, ElementalX,
SmartassH3, DanceDance and Hyper
- Updated CPU Input Boost
- Removed IntelliPlug (Bug)
- Added ThunderPlug
- Disabled add_random
- Added Frandom
- Low WiFi signals can be seen now
- Various WiFi tweaks for battery and stability
- Removed MSM_Limiter (Can cause inestability, better use Hotplugs)
- Async I/O 34% SSD Perfomance gain
- Removed a lot of useless Debug options
- TouchScreen Boost
- Added fifo Scheduler
- A lot of optimizations (Now the kernel is more fast and clean)
- Battery optimizations
[B]* v3.1[/B]
- Sharpening fix
- Build.prop tweaks
- Wireless Stream tweaks
[B]* v3.0[/B]
- Cleaned unnecessary TPC Algorithms
- Selinux now Permissive
- Fixed Init.d
- Added Post-Boot script
- Synapse Support
- Optimized battery
- General optimizations (Now the kernel
is more clean and fast)
[B]* v2.0[/B]
- Initial stable release
Light Kernel:
Code:
[B]* v2.1[/B]
- Fixed Fast Charge
- Added Kexec-Hardboot
[B]* v2.0[/B]
- Added synapse support
- Added voltage control
- Removed unnecessary TPC Algorithms
- Fastcharge support
- Selinux permissive
- Added post boot script
- Battery optimizations
- Removed unnecessary CPU Gov's
- MSM_Limiter (This was always here, I forget
to mention it )
- General Optimizations (Now the kernel is more
clean and fast!)
- Build.prop tweaks
- Wireless Stream tweaks
[B]* v1.0[/B]
- Initial release
Stock kernel source: https://github.com/Artx-II/Stock_Kernel_LGE_G3
Changelog for Artx Stock!
Code:
* v1.0
- Initial stable release
Reserved
Congrats on the kernel ! I am guessing this is only for CM and AOSP ROMs and not Stock LG based ROMs right?
IAM_TheFlash said:
Congrats on the kernel ! I am guessing this is only for CM and AOSP ROMs and not Stock LG based ROMs right?
Click to expand...
Click to collapse
Yes, only CM and AOSP :fingers-crossed:
Stayn said:
Yes, only CM and AOSP :fingers-crossed:
Click to expand...
Click to collapse
Alright awesome! Good to see another kernel for the G3
I will test it when I am back to LOS 13. For now I am on Stock LG because of the terrible battery life on CM ROMs.
@Stayn
Thank you very very very much for this work Greatest kernel I ever seen and try for D855 :highfive:
Will this have compatibility on lower versions like LP or MM? Thanks
Thanks for the new kernel. I hope it'll be good and balance battery and performance.
Sent from my LG-D855 using Tapatalk
souler456 said:
Will this have compatibility on lower versions like LP or MM? Thanks
Click to expand...
Click to collapse
It should work on Marshmallow and Lollipop, but before flashing take a boot backup
Aww i See a New kernel ..
Now supporting d850 and d852!
New Kernel Builds:
- ArtxLight Kernel!
*Currently only d851 and d855
Radio FM work?
Enviado desde mi LG-D855 mediante Tapatalk
---------- Post added at 04:43 PM ---------- Previous post was at 04:09 PM ----------
valeriogerva said:
Radio FM work?
Enviado desde mi LG-D855 mediante Tapatalk
Click to expand...
Click to collapse
Tested and working
Enviado desde mi LG-D855 mediante Tapatalk
Stayn said:
New Kernel Builds:
- ArtxLight Kernel!
*Currently only d851 and d855
Click to expand...
Click to collapse
Can you add voltage control in light kernel ?
Envoyé de mon LG-D855 en utilisant Tapatalk
davidcd13 said:
Can you add voltage control in light kernel ?
Envoyé de mon LG-D855 en utilisant Tapatalk
Click to expand...
Click to collapse
I'll realese soon the version 3.0 of normal kernel that will make it more faster, optimized and version 2.0 of light kernel with some other important things, and yes, I'll add voltage control :good:
Stayn said:
I'll realese soon the version 3.0 of normal kernel that will make it more faster, optimized and version 2.0 of light kernel with some other important things, and yes, I'll add voltage control :good:
Click to expand...
Click to collapse
With focus on battery Life?
francois amon said:
With focus on battery Life?
Click to expand...
Click to collapse
I've a great battery life, around 5h+ of SOT but I think that it need more optimization, so, yes, but in general, idle battery life is so bad on Aosp and LineageOS ROM, however, I'll try to improve the battery without sacrifying the stability.
Stayn said:
I've a great battery life, around 5h+ of SOT but I think that it need more optimization, so, yes, but in general, idle battery life is so bad on Aosp and LineageOS ROM, however, I'll try to improve the battery without sacrifying the stability.
Click to expand...
Click to collapse
Can i ask which Rom do you use ?
And thx for your work !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Ahoy everyone,
I decided to share my personal custom kernel with all of you. The main reason i started developing this kernel is to balance performance / battery / security and also add features.
I believe i have included most of the usually requested features. If your feature is not included you can ask for it and i will try to include it as long as you don't ask for ETA's. I am a student and i do this on my spare time.
Pie kernel is based on LineageOS 16.0 sources for beryllium and is compiled
with SdClang which is Qualcomm's LLVM Compiler for extra performance. [EOL] - Final Version is 3.1
10 kernel is based on LineageOS 17.1 source for beryllium and is compiled
with latest sources from LLVM for Clang 11.
So let's jump to the interesting part!
Sphinx Pie Kernel Features - v3.1
Sphinx Pie Kernel Features
Compiled with Dragon Toolchain based on Clang 9.0.0 with GCC 10 and optimized for SnapDragon 845
Upstreamed to 4.9.194
Merged CAF Tag LA.UM.7.3.r1-07900-sdm845.0
Merged Latest Lineage 16.0 commits
Makefile Optimizations
Novatech 9.6.20
WireGuard Support
Dynamic Stune Boost v3
GPU Underclock to 180 Mhz
CRC Check Disabled
Pass SafetyNet without Magisk / Root
Boeffla Wakelock Blocker
AdrenoBoost v2.2 Support
Adreno 630 Nap Mode
Pixel 3 Energy Model
Hight Brightness Mode Support
Sound Control
IR Camera for MIUI based Roms
Support sdFAT Filesystem v2.1.8
Support exFAT Filesystem
Support F2FS File System
Support NTFS File System
Frandom Random Generator
TTL Target
IP Mangle
Fsync Control
DriveDroid Support
DTS X Eagle Driver
Exposure Adjustment Driver (FlickerFree)
Reduced Latency
Config HZ -> 300
Disabled Gentle Fair Sleepers
Atheros 9 Wireless Cards Support
Ralink 27xx / 28xx / 30xx Wireless Cards Support
Kcal Advanced Color Control
K-Lapse v5.0
Vibration Control
LED Notification Control
USB Fast Charge up to 900 mAh
LZ4 Compression Algorithm by default
Backlight Minimum Brightness Control
Power Efficient Workqueues
mac80211 Injection (Kali Nethunter Support)
I/O Schedulers: Zen v2, Maple, Fiops, Sio, Noop, Deadline, Cfq, tripandroid, Anxiety, bfq
TCP Congestion Algorithms : cdg, westwood, bbr, sociopath
Pre-Configured Flash and Forget
Zipped up with AnyKernel2
Sphinx 10/11 Kernel Features - v3.2+
Compiled with latest Clang 11
Upstreamed to Linux 4.9.261
Merged latest CAF tag
Rebased on Lineage 18.0 sources
Merged Latest Lineage 17.1 commits
WireGuard Support
GPU Underclock to 180 Mhz
CRC Check Disabled
Latest Patches for SafetyNet Flags
Boeffla Wakelock Blocker
AdrenoBoost v2.2 Support
Adreno 630 Nap Mode
Sound Control
Support sdFAT Filesystem v2.1.8
Frandom Random Generator
TTL Target
IP Mangle
Expose FPS interface
Fsync Control
DriveDroid Support
DTS X Eagle Driver
Exposure Adjustment Driver (FlickerFree)
Reduced Latency
Simple Low Memory Killer
Disabled Gentle Fair Sleepers
Atheros 9 Wireless Cards Support
Ralink 27xx / 28xx / 30xx Wireless Cards Support
Kcal Advanced Color Control
K-Lapse v5.0
Vibration Control
USB Fast Charge up to 900 mAh
LZ4 Compression Algorithm by default
Backlight Minimum Brightness Control
Power Efficient Workqueues
HID Patch for 4.9 Kernels
mac80211 Injection (Kali Nethunter Support)
I/O Schedulers: Noop, Deadline, Cfq, tripandroid, Anxiety, bfq
TCP Congestion Algorithms : cdg, westwood, bbr, sociopath
Pre-Configured Flash and Forget
Zipped up with latest AnyKernel3
Notes
I bear absolutely no responsibility. If you brick your device. If you are not sure what a kernel is, how to flash it or how to restore your phone in case something goes wrong then do NOT proceed.
Moreover, you should flash this kernel only over the stock kernel that came with your Rom.
Downloads -
Pie EOL - Final Version 3.1
Sphinx 3.1: https://www.androidfilehost.com/?fid=1899786940962594232
10/11 - Current
Sphinx v3.6 : https://www.androidfilehost.com/?fid=2188818919693754613
/-----------------------------------------------------------------------------/
I have dedicated countless hours developing this kernel so if you like my work consider buying me a coffee to help me stay awake and keep improving Sphinx.
Click Here for Coffee
/-----------------------------------------------------------------------------/
For Support, Updates, Questions, Releases regarding Sphinx join t.me/SphinxKernel
XDA:DevDB Information
Sphinx Kernel, Kernel for the Xiaomi Poco F1
Contributors
milouk
Source Code: https://github.com/milouk/Sphinx-Beryllium
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.6
Stable Release Date: 2020-03-13
Created 2018-11-02
Last Updated 2020-03-13
Pocoooooooooo F1 - Donations
If you see your name and not your xda name PM me
Donations made by:
@JJ111
@tnicko
Jerzy Gawryluk
Georgios Bitloglou
@tnicko
@bla.blub
@reg66
@Lazy Rich
@BakaPhoenix @Mrdream94
@emmanuelo7
Pascal Bourasseau
@niccio67
Ramgonda Desai
@MP2005
@2WildFirE
@Dan_Jacques
@Bonz
@rodries
@fwb1973
@Lycidias
@dodjob
@makimac
@_phil07_
Arge_Canna
@SSmanBuraQ
@fmcheetah
@Migueliyo98
Andrea Nastro
Joao Martinho
Thanks again guys!
Changelog
Sphinx v1.7
-Upstreamed to Linux Version 4.9.135
-Merged ext4 upstreamed commits
-Merged Lineage 16.0 Upstream commits
-Now Compiling with Uber Toolchain 6.4.1
-Added Zen v2 I/O Scheduler
-Added TCP Congestion Algorithms (bic, cdg, cubic, westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois) default is cdg
-Improved msm_performance
-Enabled USB Fastcharge up to 900 mAh
-Added blu_schedutil
-Makefile Optimizations
-Added LED Notification Control
-Enabled LZ4 Compression Algorithm for Zram
-Now Sphinx comes Pre-Configured out of the box for balance
-Support F2FS File System
Sphinx v1.8
-Compiled with Uber Toolchain 9.0.0 tuned for Snapdragon 845
-Added Adreno Idler
-Added Frandom Random Generator
-Tuned-Up Westwood TCP
-Added Simple Low Memory Killer
-Replaced Cpu_boost with Cpu_Input_Boost driver
-Adapted Dynamic Schedtune Boost to Cpu_Input_Boost
-Added Devfreq_boost driver
-Added alucard_schedutil
-Added darkness_schedutil
-Added pwrutilx_schedutil
-Zram Upstream Updates
-Crypto: Now compiling with armv8.2-a flag
-Updated WireGuard
-Added DCTCP TCP Algorithm
-Added BBR TCP Algorithm
Sphinx v1.8.7
-Removed Adreno Idler
-Compiled with GNU GCC 8.2.1
-Removed Simple Low Memory Killer
-Removed Cpu_Input_Boost / Devfreq_Boost
-Fixed ALL Reboot Issues
-Improved KCAL Control
Sphinx v1.9
-Now Building with Custom Uber Toolchain 9.0.0 with various optimizations for SnapDragon 845
-Upstreamed from CAF to 4.9.136 , 4.9.137, 4.9.138, 4.9.139 and 4.9.140
-Added Tripandroid I/O Scheduler
-Added Sociopath TCP Algorithm
-Massively Tuned Up Westwood and set it as default
-Improved Wakelock Blocker
-Reduced a lot Latency
-Upgraded to AdrenoBoost v2.1
-Updated WireGuard
-Merged CAF Tag CAF LA.UM.6.3.r4-05800-sdm845.0
-Set the Kernel's Base Frequency to 500 HZ
-Support NTFS File System
Sphinx v2.0
-Upstream to 4.9.141, 4.9.142, 4.9.143
-Updated TouchScreen to 8.12.6
-Underclocked GPU to 180 MHz
-Set Initial GPU Frequency to 180 MHz
-Improved Memcpy spped by 15%
-Added Sound Control (Only Headphones and Mic)
-Updated LZ4 Module
-Fixed ExFAT and NTFS File Systems
-Decreased the Time the GPU needs to enter Idle Module
-Improved Battery Drop Issue (NOT fixed, just improved)
-Merged some SnapDragon 845 Patches
-Removed Pwrutilx, Alucardsched, Darkness_Sched and Blu_schedutil as they were Unstable.
-Blocked Some extra Wakelocks
-Now Sphinx comes PRE-CONFIGURED out of the box. Just Flash And Forget (You need Magisk)
-Updated WireGuard
-Merged Lineage Latest Changes
-Some Battery Saving Patches
-Much more minor things --> Check GitHub
Sphinx v2.1
-Upstreamed to 4.9.145
-Re-Based Sphinx Kernel tree from scratch based on CAF Pie Tag
-Wifi working on all Roms
-Touch Firmware from 8.12.10
-Pre-Configured settings optimized a bit more
-Merged Latest Lineage Changes
-Updated WireGuard
-Many more bug fixes and Optimizations --> GitHub
Sphinx v2.2
-Upstreamed to 4.9.147
-Updated WiFi Driver from CAF Tag LA.UM.7.3.r1-0660-sdm845.o
-Merged Latest Lineage OS Changes
-Built with SdClang for maximum optimization and performance
-Merged Touch Firmware 8.12.20
-Updated AnyKernel2
-Updated Schedutil Governor
-Merged some cpufreq patches from Upstream
-Merged a commit for smoother Frequency downscaling
-Cleaned and Improved pre-configured Settings
-Fixed the bug during Installation for users with 9.0 and not 9
-Updated WireGuard
-Many more bug fixes and Optimizations --> GitHub
Sphinx v2.3
-Linux Upstream to 4.9.148
-Merge CAF Tag 'Merge tag ''LA.UM.7.3.r1-06600-sdm845.0' into kernel.lnx.4.9.r11-rel ~8.000 Changes
-Merge Lineage OS Changes
-Compiled with LATEST sdClang 6.0.9 from Qualcomm
-Merged 8.12.27 Touch Firmware
-Many ufs (mobile ssd) improvements
-Added Anxiety I/O Scheduler
-Improved Dyanamic Schedtune frequency scaling
-Patched some memory Leaks
-Some Battery improvement commits
-Updated WireGuard
-Many more changes --> check GitHub
Sphinx v2.4
-Upstream CAF/Linux version to 4.9.151
-Merged some commits for performance improvement
-Added High Brightness Support
-Merged some commits that improved wakelocks
-Enabled Nap Mode for Adreno 630 GPU
-Adjusted Energy Model to be inline with Pixel 3
-Added BFQ I/O Scheduler v8r10
-Fixed issue with stuck frequencies
-Massive refinement of pre-configured settings. (Note 1)
-Removed TouchBoost control from userspace
-Merged many Scheduler commits
-Merge Some EAS improvement commits
-Merged Touchscreen Drivers from Official Xiaomi's Pie Kernel release.
-Merge Lineage 16.0 Changes
-Update WireGuard
-Many more commits --> Check GitHub
Sphinx v2.5
-Upstreamed from 4.9.151 to 4.9.155
-Merged CAF Tag LA.UM.7.3.r1-06700-sdm845
-Merged some Camera improvements (not feature improvements...code improvements. Sphinx is not a camera app)
-Updated Touch Firmware to 9.1.24
-Update display panel drivers from MiCode/dipper-p-oss release
-Updated Wifi drivers
-Updated Sound drivers
-Updated SdFat Driver to v2.1.8 and merged some upstream commits from 4.13
-Updated BFQ I/O Scheduler to v8r12 and also merged mnany fixes
-Improved Cpu-Boost driver
-Reduced the log spam to improve performance
-Merged a commit for entering sleep state quicker
-Merged a commit that will make face unlock much quicker
-Merged a commit that will fix frequency scaling. So now governor's frequency change requests will be followed.
-Added Toggle for disabling newly added devices
-Disabled some TCP Congestion Algorithms to make the image lighter
-Enabled Support for Ralink 27xx / 28xx / 30xx external wifi adapters.
-Merged some Power Efficient Workqueue Changes that can save some battery.
-Fixed a stupid warning that was in dmesg.
-Cleaned the script and also now you do NOT need Root (Magisk) for pre-configured settings to apply. (thanks to @rodries)
-Updated WireGuard Backend
-Merges Lineage's latest sources.
-Many more changes --> Check GitHub
Sphinx v2.6
-Upstreamed to Linux 4.9.162
-Merged CAF TAG LA.UM.7.3.r1-06900-sdm845.0
-Fixed Carrier Video Calling
-Now compiling with Dragon Toolchain based on Clang 9.0.0
-Merged some upstream F2FS commits
-Fixed F2FS Verity.
-Merged some Power Efficient Workqueue commits to save some battery
-Improved Sociopath TCP Algorithm
-Merged some TCP improvement commits
-Enabled MIN_CAPACITY_CAPPING feature
-Added an extra option for Dynamic Schedtune Boost Duration in /sys/module/cpu_boost/parameters/dynamic_stune_boost_ms and improved the code.
-Merged some more Dynamic SchedTune Boost improvement commits.
-Fixed HDR Issue after watching Youtube
-Added K-Lapse Feature
-Merged Lineage 16 Branch
-Updated WireGuard
-Improved Default Settings and fixed some of them not sticking.
-Many More --> Check GitHub
Sphinx v2.7
-Upstreamed to Linux 4.9.166
-Improved Frequency switching
-Improved Bluetooth performance
-Improved K-Lapse
-Added some more Power Efficient Workqueues
-Merged some ufs improvements
-Checked out ion to Android Q Developer Preview 1
-Fixed usb tethering.
-Merged some wakelock power saving commits
-Merged Lineage 16 Branch
-Updated WireGuard
-Many More --> Check GitHub
Sphinx v2.8
-Upstreamed to Linux 4.9.172
-Merged CAF Tag LA.UM.7.3.r1-07400-sdm845.0
-Added MSM Thermal Driver
-Fixed many Clang warnings
-Enabled Ultra Power Saving Mode for the Display Panel
-Increased CMA Memory from 200 MB to 296 MB
-Improved Boot Speed
-Merged many f2fs improvement commits
-Merged some UFS improvement commits
-Merged some Camera driver commits
-Exposed Drop Caches
-Merged Lineage 16 Branch
-Updated WireGuard
-Many More --> Check GitHub
Sphinx v2.9
-Upstream to Linux 4.9.184
-Merged CAF Tag LA.UM.7.3.r1-07900-sdm845.0
-Merged all the latest Security Patches
-Updated Wifi Drivers
-Adapted Some Compilers Flags to make it easier for other developers to compile Sphinx
-Updated TouchScreen Drivers from MIUI 9.6.20
-Merged some GPU fixes
-Updated K-Lapse to Version 5.0
-Fixed some memory leaks and race conditions
-Reverted Simple Thermal Driver (too many issues)
-Fixed random reboots issues
-Fixed Big Cluster stuck at 825 Mhz
-Merged Xbox Controller Drivers and more Gamepad Drivers
-Updated WireGuard Backend
-Merged Lineage 16.0 Branch
Sphinx v3.0
- Upstreamed to Linux 4.9.189
- Now compiling with my Custom GCC-10 Toolchain, built with optimization flags.
- Added Many SDM 845 specific optimization flags
- Merged Lineage 16.0 latest changes
- Merged Many SchedTune Commits
- Added VMStat and set it to 10
- Further Reduced Dirty Rations
- Merged Some UFS upstream Commits
- Improved Random Driver
- Turned off a lot of useless debug info
- Enabled RCU Boost
- Merged CFQ and other I/O improvement Commits
- Merged a bunch of sched Commits
- Added and Enabled SchedTune Assist Driver
- Added and Enabled CPUSet Assist Driver
- Merged some Workqueue commits.
- Added DTS X Eagle Driver.
- Added PSI.
- Fixed Phone rebooting into Fastboot Mode on MIUI Beta.
- Added DriveDroid Support for the first time for Pocophone.
- Added Pocket Judge Driver (this driver determines whether your phone is in your pocket and saves some extra battery)
- Merged a bunch o memory upstream commits.
- Updated WireGuard Backend.
- Many Many Many more commits --> Check GitHub.
Sphinx v3.1
- Upstreamed to Linux 4.9.194
- Merged Lineage 16.0 and 17.0 latest changes
- Updated my GCC 10 Toolchain to yesterdays commits
-Fixed Random Reboot issue
-Android 10 Support
- Added HID Mouse and Keyboard Support (you might need to set kernel to permissive for this to work)
-Zipped up with latest Anykernel3 thanks to @osm0sis
-Updated WireGuard Backend.
Sphinx v3.2
- Now Supporting only Android 10 (Q)
- Upstreamed to Linux 4.9.217
- Compiled with latest Clang 11
- Merged Latest Lineage 17.1 Sources
- Updated Wireguard backend
- Add Simple Low Memory Killer
- Zipped up with latest Anykernel3
- Applied new patches for SafetyNet Flags
- Many Many Many more commits --> Check GitHub.
Sphinx v3.3
- Upstream to Linux Kernel 4.9.225
- Merged Latest Lineage Changes
- Add initial HID Patch (I have NOT tested it)
- Update to latest Q Xiaomi Sources
- Fixed Auto Brightness and other display issues
- Memory and Cache Optimizations
- Merged latest updates for Simple Low Memory Killer Driver
- Updated Wireguard Kernel Backend
- Many Many Many more commits --> Check GitHub.
Sphinx v3.4
- Upstream to Linux Kernel 4.9.229
- Merged Latest Lineage Changes
- Fixed touch issues with FTS Panels
- Fixed High Auto Brightness
- Merged latest updates for Simple Low Memory Killer Driver
- Updated Wireguard Kernel Backend
- Many Many Many more commits --> Check GitHub.
Sphinx v3.5
- Upstream to Linux Kernel 4.9.237
- Merged Latest Lineage Changes
- Merge tag 'LA.UM.8.3.r1-08100
- Merge tag 'LA.UM.8.3.r1-08500-sdm845.0
- Rebase lineage 18.0
- Support for Android 11
- Improve power efficient workqueues
- Expose interface for showing FPS on compatible roms
- Merge latest LOS changes
- Remove some ethernet drivers and added usb ethernet drivers
- Merged latest updates for Simple Low Memory Killer Driver
- Updated Wireguard Kernel Backend
- Many Many Many more commits --> Check GitHub.
Sphinx v3.6
- Better Android 11 support
- Use WireGuard from Upstream 5.4
- Upstreamed to Linux 4.9.261
- Merged latest CAF tags
- Merged latest Lineage Sources
- Picked some LMK Driver update commits
- Many Many Many more commits --> Check GitHub.
Previous Versions
Sphinx 1.7:
https://www.androidfilehost.com/?fid=11410932744536993761
Sphinx 1.8:
https://www.androidfilehost.com/?fid=11410963190603845145
Sphinx 1.8.7:
https://www.androidfilehost.com/?fid=11410963190603854120
Sphinx 1.9:
https://www.androidfilehost.com/?fid=11410963190603858063
Sphinx 2.0:
https://www.androidfilehost.com/?fid=11410963190603869686
Sphinx 2.1:
https://www.androidfilehost.com/?fid=11410963190603876440
Sphinx 2.2:
https://www.androidfilehost.com/?fid=11410963190603880155
Sphinx 2.3:
https://www.androidfilehost.com/?fid=11410963190603888715
Sphinx 2.4:
https://www.androidfilehost.com/?fid=11410963190603903270
Sphinx 2.5:
https://www.androidfilehost.com/?fid=1395089523397888802
Sphinx 2.6:
https://www.androidfilehost.com/?fid=1395089523397909716
Sphinx 2.7:
https://www.androidfilehost.com/?fid=1395089523397929964
Sphinx 2.8:
https://www.androidfilehost.com/?fid=1395089523397958919
Sphinx 2.9:
https://www.androidfilehost.com/?fid=6006931924117911422
Sphinx 3.0:
https://www.androidfilehost.com/?fid=6006931924117935490
Sphinx v3.1 - Final Sphinx for Pie
https://www.androidfilehost.com/?fid=1899786940962594232
Sphinx v3.2
https://www.androidfilehost.com/?fid=4349826312261759378
Sphinx v3.3
https://www.androidfilehost.com/?fid=4349826312261822112
Sphinx v3.4
https://www.androidfilehost.com/?fid=8889791610682883785
Sphinx v3.5
Sphinx-v3.5.zip | Kernel by milouk for Poco F1
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Version 1.7
Ahoy Ladies and Gentlemen.
Time for new version!
Changelog:
1) Upstreamed to Linux Version 4.9.135 - Better Security / Stability / Performance
2) Merged ext4 upstreamed commits - Better System Performance
3) Merged Lineage 16.0 Upstream commits - Better Stability / Battery / Performance
4) Now Compiling with Uber Toolchain 6.4.1 - Better Battery/System Performance
5) Added Zen v2 I/O Scheduler - Better I/O Performance
6) Added TCP Congestion Algorithms (bic, cdg, cubic, westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois) default is cdg - Better Internet Performance
7) Improved msm_performance - Better Performance
8) Enabled USB Fastcharge up to 900 mAh - Note (1)
9) Added blu_schedutil - Note (2)
10) Makefile Optimizations - Better Performance
11) Added LED Notification Control- Note (3)
12) Enabled LZ4 Compression Algorithm for Zram - Better Battery / Performance
13) Now Sphinx comes Pre-Configured out of the box for balance
14) Support F2FS File System - If Rom Supports it -
Notes:
Note 1: This is USB Fast Charge which means it works ONLY when you charge from a computer. The default output was 500 mAh and now it's 900 mAh (which is the maximum a usb port can support)
Note 2: This is a new EAS Governor ported from blu_spark Kernel for OnePlus 6. Currently it is almost the same with the schedutil governor from Pixel 3
Note 3: Many of you made some comment about the LED Notification being brighter etc. Now you can configure it yourself. THOUGH there is not interface for that in ANY App, you need to do it yourself.
Specifically:
Code:
* /sys/class/leds/white/device/led_fade (rw)
0 : blink
1 : fade (default)
* /sys/class/leds/white/device/led_intensity (rw)
0 : stock intensity
1-100 : 0% to 100% of stock intensity
Note: Does only work for static led, not fading/blinking !!!
* /sys/class/leds/white/device/led_speed (rw)
0 : stock speed
1 : continuous notification light
2-12 : 2 = very slow to 20 = very fast
I have listened to your requests to bring Sphinx to Poco and did everything in my powers to satisfy most of you and ensure this version is stable so if you enjoy this version don't forget to buy me a coffee
Cheers :highfive:
Wow, Amazing. Can i flash this on stock miui beta 8.11.1 also
Great work.
Edit :
Just installed , super smooth. Everything works great so far. Antutu 291328. Not sure if it is placebo but face unlock seems to be faster, haven't been able to see lock screen in the trials I have done so far.
Rom is stock beta 8.11.2 and no root yet.
Will root and tweak with suggested ex kernel manager and report
sanjay0501 said:
Wow, Amazing. Can i flash this on stock miui beta 8.11.1 also
Great work.
Click to expand...
Click to collapse
Of course you can mate
frequency on big cluster is max on blu schedutil whilst on omnirom
thanks sounds really good gonna try it right after i flashed 8.11.1
Skinpipe said:
frequency on big cluster is max on blu schedutil whilst on omnirom
Click to expand...
Click to collapse
Its how it works. It maxes the big but it lowers little cores. Currently its almost a direct copy from Pixel's 3 schedutil. If you dont like this behaviour i would suggest regular schedutil. Regarding blu_schedutil you can read more on its original thread "blu_spark kernel for OnePlus 6"
milouk said:
Its how it works. It maxes the big but it lowers little cores. Currently its almost a direct copy from Pixel's 3 schedutil. If you dont like this behaviour i would suggest regular schedutil. Regarding blu_schedutil you can read more on its original thread "blu_spark kernel for OnePlus 6"
Click to expand...
Click to collapse
ill check it out im familiar with eng.stk' work
Skinpipe said:
ill check it out im familiar with eng.stk' work
Click to expand...
Click to collapse
Awesome. Its a direct port from his kernel.
milouk said:
Awesome. Its a direct port from his kernel.
Click to expand...
Click to collapse
you absolutely sure its supposed to stay at 2803mhz constantly that is a huge power drain and makes no sense?
Skinpipe said:
you absolutely sure its supposed to stay at 2803mhz constantly that is a huge power drain and makes no sense?
Click to expand...
Click to collapse
What im saying is that i picked the code EXACTLY like it is. Its 99% the same as Pixel 3 schedutil. Also youll notice that the battery drainisnt at all as huge as you think.
Morever while merging there wasnt even one conflict the code is 100% correct and exactly as eng.stk wrote it. Ifnyou have questions about the code im not the person to ask no offense. Im not taking the credits nor the blame for someone elses work. I just think its a nice addition especially for users that need performance.
Also as you may have noticed its not the default gov for that exact reason.
**Also of course there is always the possibility to remove a feature if i see no one finds it usefull.
Btw i always listen to feedback and try to satisfy most of you.
Cheers
milouk said:
What im saying is that i picked the code EXACTLY like it is. Its 99% the same as Pixel 3 schedutil. Also youll notice that the battery drainisnt at all as huge as you think.
Morever while merging there wasnt even one conflict the code is 100% correct and exactly as eng.stk wrote it. Ifnyou have questions about the code im not the person to ask no offense. Im not taking the credits nor the blame for someone elses work. I just think its a nice addition especially for users that need performance.
Also as you may have noticed its not the default gov for that exact reason.
Cheers
Click to expand...
Click to collapse
understood, my apologies
Skinpipe said:
understood, my apologies
Click to expand...
Click to collapse
Hahaha didnt mean to offend you at all what i was tryin to say is that its not my code so i cant guarantee what its supposed or not supposed to do. Apologies if i offended you mate
milouk said:
Hahaha didnt mean to offend you at all what i was tryin to say is that is not my code so im cant guarantee what is supposed or not supposed to do. Apologies if i offended you mate
Click to expand...
Click to collapse
i was sincere not sarcastic no offence taken, honest:good:
Foourck yesssss ? you are in the Poco team ???? really really looking forward to your awesomeness on the S845 ??.
dodjob said:
Foourck yesssss ? you are in the Poco team ???? really really looking forward to your awesomeness on the S845 ??.
Click to expand...
Click to collapse
Oooouuu heello my friend. Nice to see you here i hope i wont let you down
Introduction post looks AWESOME, this is what I've been waiting for - great kernel. Flashing right away.