[Check the first reply for all links]
Hello guys,
Here's my Redmi Note 3 running on CM14.1 (Abhishek's December 3 built).
[Check the video for all features: Link 1*]
Disclaimer!
I don't responsible if your device won't boot, do it ona your own risk! You were warned!
Anyway,
In order to make your Redmi Note 3 like this, you have to follow some steps!
1. Unlock the bootloader,
2. Root your device
3. Install a custom recovery (TWRP)
[For the above 3 steps, I highly suggest to to check Jay Kapoor's tutorial: Link 2*]
4. Install CM14.1 Abhishek's December 3 built (Navbar & Round icons will not work in any other ROM, don't worry it supports VOLTE ?)
[For this step, follow Madhur Agarwal's tutorial:
Link 3* . Guys everything is ok just you have to download the ROM file from this link: Link 4* instead of the link mentioned in the video, all other steps are same just download the ROM file from here or you can directly check Abhishek's post: Link 5* ]
5. Download ES File Explorer: Link 6*
6. Now go to settings> About phone and tap on the Build Number for 6 times & it'll show that develops operation enabled. Now go to develops operation>Root access & select App only. Now reboot your phone.
7. Now open ES File explorer & grant root access.
Almost done now for step 8 & 9 you have to check 2 XDA developer's forum.
8. Enable Pixel Navbar: Link 7*
9. Round Pixel Style Icons: Link 8*
Okay, this is the last step! Now download the zip file (from here: Link 9 ) & extract it in your internal storage. Now this is the final Step!
10. Flash the 4 zip file in thia order:
i. GooglePixelBootanimation1920x1080.zip
ii. Pixel_Sounds.zip
iii. GoogleAssistantBuildProp.zip
iv. GoogleAssistantVelvet.zip
Okay guys this is very important! I don't know why but if you don't follow the steps, it'll not work!
But If everything goes fine, congratulations your Redmi Note 3 is now become a Google Pixel (Softwarically ?).
[** I'm really really sorry but I'm a new member & this is my 1st post. So I can't post any links?!
So I decided to post the thread & Mention all the links in the first reply. Sorry for that. Check the 1st reply for all the links]
So here are the links:
Link 1* : http://bit.ly/2gi2WYj
Link 2* : http://bit.ly/2ghTUuk
Link 3* : http://bit.ly/2ghQKqv
Link 4* : http://bit.ly/2ghUaJL
Link 5* : http://bit.ly/2h0WDXn
Link 6* : http://bit.ly/2gi0oct
Link 7* : http://bit.ly/2h0Vkrj
Link 8* : http://bit.ly/2h0XmYB
Link 9* : http://bit.ly/2gi7WvR
can we flash it over MIUI latest Global Developer version??
Triggered from my Nexus 10
amitroutray said:
can we flash it over MIUI latest Global Developer version??
Triggered from my Nexus 10
Click to expand...
Click to collapse
No, this for cm14.1 rom only
Can I use this on CM14.1 Nightly TheStrix build?
Can i get it on dev rom
Sent from my Redmi Note 3 using Tapatalk
Nice work but I prefer pure AOSP or CM as I rarely use all of that features,
Anyway, thanks for sharing.
Sent from my Redmi Note 3 using Tapatalk
MY ULTIMATE PIXEL UI MOD FOR OFFICIAL CM14.1 BY THESTRIX PLEASE LOOK AT IT.
Can use with custom rom? I use Epic Rom for 6.12.15
Related
Very pleased to bring MIUI 7, the ROM supports OTA online upgrade......
Thanks silesh Provide cm support，The ROM through the SmalI insert pile compiled into。
I'm not good at English, not much to introduce.
Download address : http://miuirom.xiaomi.com/rom/u941039572/5.10.1/miui_Mega6.3_Aabyebaby_5.10.1_2001c55afd_4.4.zip
Please use twrp 2.8.6: https://copy.com/MjwzSBPE3o0HhgbO
please , please make it for galaxy mega 5.8 tooo -__-
Yes that's right would be great to have the version of MIUI for the device
@Aabyebaby
Please look at other ROM's threads and edit first post as well giving all info's about installation, screenshots and so on.
Dead line: 48 hours from this moment.
Thanks
Razvan
Forum Moderator
Mod Edit: Thread closed. OP please PM me when you have all the info's.
I will help with the screenshots and installation info
This is MIUI V7, based on AOSP KK 4.4.4.
Everything works fine, battery friendly, smooth. No FC's till now, no sudden reboots.
SuperSU update link bellow
https://download.chainfire.eu/696/SuperSU
KK 4.4.4 gapps link bellow
http://downloadandroidrom.com/file/gapps/PA/4.4.4/pa_gapps-modular-micro-4.4.4-20140629-signed.zip
Kernel link bellow
https://copy.com/MjwzSBPE3o0HhgbO
Rom MIUI V7 link bellow
http://miuirom.xiaomi.com/rom/u941039572/5.10.1/miui_Mega6.3_Aabyebaby_5.10.1_2001c55afd_4.4.zip
1.First save the kernel, the rom, SuperSU update zipand KK4.4.4 gapps to your internal /SD card (from post #1).
2. Flash the kernel first via recovery and after it's done, reboot to recovery again.
3. Do a wipe from recovery
4. Flash the MIUI V7 ROM
5. Flash KK 4.4.4 gapps(so you cand have acces to playstore)
6. Reboot the phone
7. Finish the initial setup steps
8. Reboot to recovery and flash SuperSU update zip
9. Reboot the phone
10. Enjoy MIUI V7 experience!
I hope that I wrote all the needed info
After a long wait here is the first cyanogen mod 13 Today we bring you the latest version of android which is marshmallow on Yu yureka. We bring you this release in the form of CyanogenMod 13 which is a custom rom based on latest AOSP. Being a initial release there are plenty of bugs accompanied along with it and should be solved eventually.
Release notes :
1:-Initial CM 13 release based on latest google release tag r26
2:-Some basic regular CyanogenMod features. ( Includes theme engine )
What works ?
1 Wifi
2 Bluetooth
3 Internal storage ( SD seems to be broken )
4 All functionality of RIL ( except data connection which seems to be broken )
5 Camera ( Picture works. Video recording doesn’t )
6 All other basic functionalities ( Basic apps seem to be working )
7 Titanium backup works fine
8 You say more !
A huge thanks to
1- cyanogen mod team
2-google
3- please let me know if i have missed somone who deserve thanks
Flashing procedure :
1 Copy the zip to ur sd card. ( Download link available below in downloads section )
2 Wipe data/cache
3 Wipe dalvik
4 Install zip\ flash gapps (not necessary installing apks are recommend)
5 Reboot and have fun
Downloads :
MOD EDIT: links removed
Don't forget to hit thanks button below this post
Enjoy
HIT THANKS
SCREENSHOTS COMING. SOON
HIT THANKS
RESERVED
This ROM is originally built by @Santhosh M and you have just copy pasted it and want people to hit thanks button
Please Close This Thread
Did u take permission from Santosh before posting it here?
Sent from Yu in love with
www.trendingus.com
Thread closed, looking into things.
New stable ROM for MI5C - miui_MI5C_V8.5.3.0.NCJCNED_dd8416320b_7.1
Initial tests show good speeds on H compared to V8.1.19.0 (100K compared to 7M)
Download Link
https://mega.nz/#!c2ZgDZ7a!MoID1GvDC6PezTZ17NANZHsYgui9qjBBZp_Ygive6s8
the link isn't working
stewc said:
New stable ROM for MI5C - miui_MI5C_V8.5.3.0.NCJCNED_dd8416320b_7.1
Initial tests show good speeds on H compared to V8.1.19.0 (100K compared to 7M)
Link
the link isn't working ,the below error shown after the count down of download finished
Click to expand...
Click to collapse
Link updated
could share the steps to install it as till now.i.have big to.KNOW how.to.install.it
beko555 said:
could share the steps to install it as till now.i.have big to.KNOW how.to.install.it
Click to expand...
Click to collapse
open updater app;
see top right corner choose update packages select that download rom;
u should be connected to internet. package will get verified;
or other method is to install twrp in your phone to make force install this new rom
could you tell how can i twrp this.in details.plx.to avoide any wrong step
is this rom supporting multi languages and google play store
is this rom supporting multi languages and google play store
Click to expand...
Click to collapse
No, just Chinese and no Play store
is there any way to add multi language to this rom ?
You'll need to flash a multirom - https://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
mi 5c flash in fastboot mode after coming mi logo hange .not open. next download update file .flash in fastboot mode but flash erro bootlodear locked .please any solution
Hello everyone, whoever has a link to Miui 10 for Mi 5c
i looking for firmware mi 5c any body can help me please . need tested file . file name song
Hi All
Since there is all sorts of development running at the moment and the treble Pie has been put within radar, I thought I make a grouped topic/discussion only for this sGSI version. Some known install procedure, adds and also the pros and cons about this version so everybody can learn.
As I have seen and heared, some users are confused and didn't find all data and files needed to boot, I grouped them here in order and add some other files to finalize what you can do with this version at the moment.
I give all the credits to those who made this possible so far.
Correct me where needed.
Base : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659 thnx @erfanoabdi
Pre-requirements :
*unlocked bootloader
*B12 Nfound
Files needed :
1. TWRP 3.2.1.8 treble thnx @NFound
2. AXON7_GPT_ADD_VENDOR_800MB.zip @djkuz
3. Project_Treble_v1.1_Axon7-by-NFound.zip @NFound
4. P-PR1-sGSI-Aonly.zip - extract the 7z to the img and put it on extSD
5. POST-sGSI_1_v0.14.zip
6. POST-sGSI_2_v0.17.zip
7. POST-sGSI_3_v0.5.zip
Installation :
a Install TWRP 3.2.1-8 - TREBLE, reboot into twrp
b reboot to EDL
c Install AXON7_GPT_ADD_VENDOR_800MB.zip through Miflash (so extract files to same folder name and search it via Miflash)
d reboot into twrp again
e format system, data, cache, wipe vendor
f install Project_Treble_v1.1_Axon7-by-NFound.zip. This will 'resize' vendor to a +-500mb / afaik also compatible with LOS15 (treble) now, betas(B01,B12), all official roms A7, GSI's
g install P-PR1-sGSI-Aonly.zip, so tap install/img and choose the img file and flash
h install the 1, 2, and 3 Post-sGSI files in order, so mount /vendor and flash those 3 files.
i Reboot
After boot :
*use the gms , install it and create an account on google. It will speed up installation
* use Gcam to have a working camera : https://github.com/AospExtended/platform_vendor_aosp/blob/8.1.x/prebuilt/common/apk/Gcam.apk
* use this patch to have settings working in camera : https://forum.xda-developers.com/showpost.php?p=77296562&postcount=55 thnx @yarecco
* disable the navbar with : go to vendor / build.prop and add "qemu.hw.mainkeys=1"
or flash this A2017X Vendor NavBar Remover
* reverse softkeys : https://forum.xda-developers.com/axon-7/themes/mod-soft-key-reverse-using-synapticsdsx-t3827574
* for those who have call issues : https://forum.xda-developers.com/showpost.php?p=77285228&postcount=22 thnx @atakan33
* best, even on v1.1 to flash the framework overlay again : https://www.sendspace.com/file/x7jv8q. Makes DT2W work as it should !
*flash the pr1-lag-fix.zip to get a smoother experience thnx @atakan33 to mention it
As far as I know these things work :
*playstore....
*magisk 16.4, 16.7 working ok - safetynet pass ok confirmed on 16.7 - all should work, only a temp problem : https://twitter.com/topjohnwu/status/1029239685338419200?s=09
*full root r/w
*modules like youtube, jojoc....
*adaway
*call app but with ECHO so other persons hear themselves... for some members, even without Volte, the echo is note there and call volume can be adjusted
*no overheating with the v1.1
*better battery performance since v1.1
*dt2w works if you flash the framework overlay again when you're already booted. I uploaded it here since it got lost : https://www.sendspace.com/file/x7jv8q
* fast charge works, no heating at all
* spilt screen : just long press the icon in recents thnx @SantiHurtado
Not working :
*auto-brightness...or not in a way we're used to.... - there is no quick settings toggle, so if you want to untick auto, go to settings/display...
*dolby , but try this : https://forum.xda-developers.com/showpost.php?p=77289658&postcount=31 thnx @yarecco NOT WORKING - tested it myself and even bootloop when removing them. So if you want to try BACKUP FIRST !
*usb bug : greyed out so no control - in dev options you can choose an option but the usb setting still will be greyed out
......
Hope you can join in to give your opinion and add some more feedback to the pros and cons.
Join telegram Axon7 (s)GSI trebleSHOOT
Thanks man.
Based on AospExtended thread, I have done step 1 and 2. At present, I am on the latest AospExtended treble. I was wondering if someone can tell me if I need to do step 3 to 7. Do I need these ONLY if I want to try other GSI Roms? Or, do I need to do all of them regardless sooner or later?
Thanks.
EDIT: After more reading on the other thread, I think I understand more about this. Step 4 to 7 are to install the GSI rom. I guess my question now is if for now I want to keep using the latest AospExtended treble (Oreo), do I need to do step 3? Thanks
The GCAM link does not work. Saying file too large to display.
have installed Magisk 16.7 and safety pass is true
Gesendet von meinem ZTE A2017G mit Tapatalk
What is meant by sGSI or semi GSI?
ttkian said:
Based on AospExtended thread, I have done step 1 and 2. At present, I am on the latest AospExtended treble. I was wondering if someone can tell me if I need to do step 3 to 7. Do I need these ONLY if I want to try other GSI Roms? Or, do I need to do all of them regardless sooner or later?
Thanks.
EDIT: After more reading on the other thread, I think I understand more about this. Step 4 to 7 are to install the GSI rom. I guess my question now is if for now I want to keep using the latest AospExtended treble (Oreo), do I need to do step 3? Thanks
Click to expand...
Click to collapse
For this semiGSI you will need all steps a to i. For GSI's you can skip step h afaik.
Raffikie said:
The GCAM link does not work. Saying file too large to display.
Click to expand...
Click to collapse
Is working fine. Go to the page and just download
Rennert said:
have installed Magisk 16.7 and safety pass is true
Gesendet von meinem ZTE A2017G mit Tapatalk
Click to expand...
Click to collapse
Are you on v1.0 or v1.1 ? Because as for me on v1.0 I had a pass but on v1.1 it was a no go. Special setting used ?
EDIT : safetynet works, only cant be checked for the moment : https://twitter.com/topjohnwu/status/1029239685338419200?s=09
StickMonster said:
What is meant by sGSI or semi GSI?
Click to expand...
Click to collapse
That's the same. But Oki explained it imo very well here : https://forum.xda-developers.com/showpost.php?p=77328471&postcount=4793
A2017X_vendor_navbar_remover
For those who don't want to mess with their build.prop, just flash this and it will remove the navbar (if there is).
It'll work on all vendor build.props in future.
Backup of original build.prop will be created in /vendor so you can always revert if needed.
1. Since DT2W wasn't working, as in my experience and many others, on V1.1, I reflashed the Framework Overlay again and DT2W is working now.
2. Also, seems with Volte working properly, @kountry83, could manage to get the incall echo disappear and make decent calls. Even call volume is adjustable.
We're testing on TG (feel free to join too) further on.
3. The Dolby DDP and Audiomodification Lib seems not to work properly. Even bootloop when removing it...Did someone succeed in Dolby ?
4. flash the pr1-lag-fix.zip to get a smoother experience thnx @atakan33 to mention it
Dolby doesn't work, FC when start app. I don't have remove it, but can test it.
must i change the bootstack? because yesterday i tried to install PR1 but it cannot boot because i use universal bootstack that used on LOS 16 treble, i use Bootstack 12 and it boot, what is the best bootstack for this? thank you
shuemantri said:
must i change the bootstack? because yesterday i tried to install PR1 but it cannot boot because i use universal bootstack that used on LOS 16 treble, i use Bootstack 12 and it boot, what is the best bootstack for this? thank you
Click to expand...
Click to collapse
You're good to go on the B12 bootstack from NFound. Rest is in description of OP to boot any (s)GSI in future :good:
N986B/N985F Dr.Ketan ROM
Supported device : N986B N985F
We do support usually 2-3 years since device launched, but yet no guarantee, We may drop support for any device / any variant/s anytime without any prior notice.
ROM Features
ROM Features varies with version of ROM. For more details, read changelog post. Link available in post #3 for changelog of all versions.
Must read changelog for a version you are going to install, it will have latest information about features, changes, known bug list/fix and Installation guide of respective version.
Credit and Thanks :
Spoiler
@Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works.
corsicanu for TWRP. Original Thread here
@topjohnwu for Magisk
@xperiacle the amazing developer for reference to his work and tools. @amarullz for aroma installer. @gharrington for 3minit battery and QuickLaunch.
ROM Control source and all credit and thanks goes to @daxgirl and @Wuby986 for their open source project for RomControl.
@AbrahamGC for some ideas samsungvn htcmania & 4PDA for tips and some stock apks.
AbrahamGC and Anan1211 for Secure folder and s-health A12 ianmacd for TWRP @Arteush for bluetooth fix (losing BT pair on reboot) on Android Q, aka_vkl for Dolby digital, kdrag0n for SafetyNet fix @Winb33 for custom font pack
XDA:DevDB Information
N986B I Dr.Ketan ROM , ROM for the Samsung Galaxy Note 20 Ultra
Contributors
dr.ketan, Dr.Ketan
ROM OS Version: Android 13
ROM Kernel: Stock (pre-rooted). Source code (samsung) here
ROM Firmware Required: Stock Samsung
Version Information
Status: Stable
Created 2020-08-27
Installation and Download aand Notes
Important :
- This will void warranty.
- As of now you will lose Samsung Pay and Samsung Pass forever if you root once, even unrooting won't help. (hope in future we can get it working on tripped knox device)
- OTA won't work once you root device.
- ROM Tool permission : Files & media - To save and read files, Calendar - Tool needs some time monitoring to avoid using RT immediately after reboot. Special access for accessibility service - Since Android 12 it requires for QS panel custom Toggl e.g. Reboot to recovery
Installation :
Read ChangeLog post for Installation instructions (link on post #3)
PS : Who can handle consequences of dirty flashing, they never need to ask this question in forum. If you dirty install then handle it yourself .
Download : https://drketanrom.com/
ChangeLog
Android Q
- Q01 - 27.08.2020 - Initial release
- Q02 - Only Test release
- Q03 - 11.09.2020
- Q04 - 21.09.2020
- Q05 - 10.10.2020
- Q06 - 11.10.2020
Android R(Beta)
- RB1 - 27.10.2020
- RB2 - 29.10.2020
- RB3 - 06.11.2020
- RB4 - 12.11.2020
- RB5 - 04.12.2020
Android R (Stable)
- R01 - 19.12.2020
- R02 - 06.01.2021
OneUI 3.1
- R03 - 19.02.2021
- R04 - 15.03.2021
- R05 - 27.03.2021
- R06 - 02.05.2021
- R07 - 12.06.2021
- R08 - 10.07.2021
- R09 - 14.08.2021
- R10 - 09.09.2021
- R11 - 17.10.2021
- R12 - 08.11.2021
Android S (A12) OneUI 4.0 (Beta)
- SB1 - 16.11.2021
Android S (A12) OneUI 4.0 (Stable)
- S01 - 30.12.2021
- S02 - 18.01.2022
- S03 - 31.01.2022
- S04 - 06.02.2022
Android S (A12) OneUI 4.1
- S05 - 20.03.2022
- S06 - 16.04.2022
- S07 - 17.05.2022
- S08 - 13.06.2022
- S09 - 14.07.2022
- S10 - 08.08.2022
- S11 - 28.09.2022
Android T(A13) OneUI 5.0
- T01 - 11.11.2022
- T02 - 19.12.2022
- T03 - 23.01.2023
- T04 - 09.02.2023
Android T(A13) OneUI 5.1
- T05 - 21.02.2023
- T06 - 16.03.2023
- T07 - 24.04.2023
- T08 - 14.05.2023
- T09 - 24.06.2023
How to report bugs/Issue?
To report issue, you needs to provide following informations, else it will be ignored. Also if your query is already mentioned on OP/ChangeLogg post, it will be ignored.
1.ROM build number.
2.Dirty/Clean Install. - If you have dirty installed, Then first clean install and report if issue persists.
3.Bug/Issue appears right after installing or later?
4.How to reproduce error.
5.Is there any same reports there on thread on your searching?
6.Is there any mention about same bug on OP or changeLog post?
7.Logs - Attach logs here/Upload to other places where it can be downloaded without registration and doesn't have ad (we recommend dropbox/Gdrive) and post link.
Click to expand...
Click to collapse
Bootloader & Modem..
Reserved
Wow! That was fast! Nice work!!
Hey Ketan !!! I received my note 20 3 days ago but i didn't open it until you release your ROM. I will try it tonight. Thanks very much for your work !!!!
Talderon said:
Wow! That was fast! Nice work!!
Click to expand...
Click to collapse
sayou94 said:
Hey Ketan !!! I received my note 20 3 days ago but i didn't open it until you release your ROM. I will try it tonight. Thanks very much for your work !!!!
Click to expand...
Click to collapse
Thnk you guys for love & support you always shower!
Let me complete instructions and my website for download link.
When a new version of the Rom comes out, can you just flash it over the old one?
ChangeLog Q01 For N986B
- Based on N986BXXU1ATH3 1Aug security patch
ROM features are same as mention on Post #1
Some Important things to note -
This ROM is tested only on N986B If any N985 users want to test, can try on your own risk. Report outcome and I may try to fix.
TWRP is Included in ROM itself. Credit & Thanks to Geiti for TWRP
This is first version and needs to flash using Odin, subsequent version may have different scenario. Read Installation guide below for details
This is first release, There may be more fix/features there in subsequest releases.
Recommended Installation Steps
Requirement :
- Rooted N986B based on Aug security patch
- It is must to have root using Full AP Magisk + Patched kernel shown on this thread. If you have rooted with only patched kernel then you must first root with full AP magisk patch file + Patched kernel as shown on linked thread.
- Odin 3.14.4 or above
Installation :
- Backup your data, this procedure will erase all data including Int storage.
- Download N986B_DrKetan_ROM_Q0*.zip and extract to PC
- Boot device to download mode (Switch Off device - Keep holding Vol Up + Down & connect to PC with USB)
- Open Odin - Disable Auto Reboot in Option
- Click AP tab and navigate to file you have downloaded & extracted N986B_DrKetan_ROM_Q0*.tar.md5
- Click Start and when it completes, disconnect mobile and keep holding Vol down+Side Key for 7 sec, as soon as device screen goes off, use combo key to reboot to recovery
- Now you will have TWRP - Select Wipe - click FORMAT DATA - You need to type "yes" to continue
- When finish, Reboot to system
ROM specific Instructions.
Once device boot to android, straightway do following things before setting up device further
Check Magisk Manager is installed. If there, Open it and complete environment setup (Device must be connected to internet) - Reboot. In case Magisk Manager not installed, get latest stable from magisk gut hub and install manually and follow as said.
Open Magisk, settings - enable magisk hide. Also recommended to turn of supersu notification while setting up.
Open ROM Tool - It will ask to Apply Essential Fix, Complete it and Reboot.
Now you can set up your device as per your desire. Enjoy!
Tips, Add On & Fix
- Stuck while flashing something (Bootloop), How can I reboot to download
There is a golden rule that always works when you stuck anywhere (bootloop). Follow this -
1.Plugin device to PC
2.Keep holding power + vol down
3.As soon as screen goes blank, keep holding vol up + vol down (here you needs to be quick)
And you are in download mode.
- EdXposed You can directly install from Magisk download repositories
- Unable to login to samsung ac : I have observed recently in one condition, restoring a backup that includes samsung acc. I have encountered this once and fixed by installing Samsung Members and logged in with that. By using this app, it showing "your session is expired login again" after this it was worked. Another possibility is, few users have reported some version of custom kernel was causing issue with samsung acc.
- Read ROM Tool - Update & Fix if any new available.
Download and other instructions available in post #2
This is a customized ROM and for end users only, ROM or any part of ROM/mods not allowed to redistribute,modify or to use as base to prepare new ROM/ part of other ROM.
How to report bugs/Issue?
To report issue, you needs to provide following informations, else it will be ignored. Also if your query is already mentioned on OP/ChangeLogg post, it will be ignored.
1.ROM build number.
2.Dirty/Clean Install. - If you have dirty installed, Then first clean install and report if issue persists.
3.Bug/Issue appears right after installing or later?
4.How to reproduce error.
5.Is there any same reports there on thread on your searching?
6.Is there any mention about same bug on OP or changeLog post?
7.Logs - Attach logs here/Upload to other places where it can be downloaded without registration and doesn't have ad (we recommend dropbox/Gdrive) and post link.
Click to expand...
Click to collapse
Thanks for keeping patience.
Wow already
Love your rom on note9
dr.ketan said:
Thnk you guys for love & support you always shower!
Let me complete instructions and my website for download link.
Click to expand...
Click to collapse
Im back to note series and back to stable as rock Dr. Ketan Rom
do you think to do the rom also xnka variant 988b?
Dr.Ketan Going to install your Awesome Hatd work Rom and if any bugs will report my bro. Thanks bro.
Tekkamen77 said:
do you think to do the rom also xnka variant 988b?
Click to expand...
Click to collapse
Extract CSC_*.tar.md5 file from your stock ROM and send it to me, I will look into it.
beautyangel said:
Dr.Ketan Going to install your Awesome Hatd work Rom and if any bugs will report my bro. Thanks bro.
Click to expand...
Click to collapse
It will be available in few minutes. Thanks.
dr.ketan said:
Extract CSC_*.tar.md5 file from your stock ROM and send it to me, I will look into it.
It will be available in few minutes. Thanks.
Click to expand...
Click to collapse
thank you for answering me if you tell me how I can do it
Tekkamen77 said:
thank you for answering me if you tell me how I can do it
Click to expand...
Click to collapse
You needs to download stock firmware from frija or samfirm tool, use 7zip to extract said file. Upload to goole driver or similar and send me link.
dr.ketan said:
You needs to download stock firmware from frija or samfirm tool, use 7zip to extract said file. Upload to goole driver or similar and send me link.
Click to expand...
Click to collapse
ok okay .. thanks
Not rooting this time round. But thanks for all your work for this device.
Q01 is online now!
.